Wegener's theory of continental drift was an important early step in our understanding of how the continents move, but it lacked a complete explanation for the forces driving their movement.
Alfred Wegener's theory of continental drift proposed that the continents were once joined together as a single landmass, which he called Pangaea, and that they gradually moved apart over time. He suggested that the continents moved due to the forces of tides, centrifugal forces, and other factors. Although Wegener's theory was met with skepticism when it was first proposed in the early 20th century, it is now widely accepted as a valid explanation for the movement of continents.
Wegener based his theory on several lines of evidence, including the fit of the continents, the distribution of rocks and fossils, and the presence of glacial deposits in areas that are now too warm for glaciers. However, his explanation for the forces driving the movement of the continents was incomplete and lacked a plausible mechanism. It was not until the discovery of plate tectonics in the mid-20th century that a more complete explanation for continental drift was provided.
Plate tectonics explains the movement of the continents by the movement of the plates that make up the Earth's crust. The plates are driven by convection currents in the mantle, which move material up from the hot interior of the Earth, causing the plates to move apart, slide past each other, or collide. As the plates move, they carry the continents with them, causing them to drift apart or come together.
Learn more about continental drift here https://brainly.com/question/15122129
#SPJ4
Indeed, Alfred Wegener's assertions make logical. His hypothesis of continental drift, which is backed by a variety of geological and paleontological data, postulated that the continents were originally united together in a single landmass before drifting apart.
According to Alfred Wegener's hypothesis of continental drift, Pangaea, all the continents previously belonged to a single supercontinent. He thought the continents drifted to their present locations over millions of years after the supercontinent started to disintegrate some 200 million years ago. The matching of geological characteristics and fossils across continents, the resemblance of rock formations and mountain ranges, and the discovery of magnetic stripes on the ocean floor have all been used to support this idea, which was previously viewed with suspicion. In light of this, Wegener's assertions that the continents were originally linked and then drifted apart make sense, and his hypothesis has completely changed how we think about the Earth's past and current dynamics.
learn more about Alfred Wegener's here:
https://brainly.com/question/29547747
#SPJ4
need help asap pleasee
Answer:
Hello! Our answer is C: it shows negative acceleration :)
Explanation:
Small tip: Always draw a car when you are working with these type of questions. Now imagine: A car is moving in the positive way, goes smae speed for a bit, and slows down. Then it stops at 30 mins. Then it starts moving in the opposite direction. So, our answer is c :)
Good luck!
A person pulls a box on a horizontal floor by a rope making an angle 30 to the normal the tension force on the rope is 400 N and the friction force is 45 N, find the acceleration of the box if its weight is 1292 N.
a)1.5 m/s²
b)5 m/s²
c)0 m/s²
d) non of them
I need the answer urgently please
Answer: First, let's resolve the forces acting on the box along the horizontal axis:
T cos(30) - f = ma
where T is the tension force, f is the friction force, m is the mass of the box, and a is its acceleration.
We can also resolve the forces along the vertical axis:
T sin(30) - W = 0
where W is the weight of the box.
Solving for T and W:
T = 400 N
W = 1292 N
T sin(30) = (400 N) sin(30) = 200 N
W = 1292 N
Now we can substitute these values into the horizontal equation and solve for the acceleration:
T cos(30) - f = ma
(400 N) cos(30) - (45 N) = (m)a
(346.4 N) = (m)a
a = (346.4 N) / m
We can calculate the mass of the box using its weight:
W = mg
1292 N = m(9.81 m/s^2)
m = 131.8 kg
Now we can substitute the mass into the equation:
a = (346.4 N) / (131.8 kg)
a ≈ 2.63 m/s^2
Therefore, the correct answer is not listed. The acceleration of the box is approximately 2.63 m/s^2.
Explanation:
when a falling merteoiud is at a distance above the earth's surface of 3 times the earth's radius what is it acelartion due to earths gravitation
At a distance above the Earth's surface of 3 times the Earth's radius, the acceleration due to Earth's gravity is approximately 1.23 m/s².
Distance above the Earth's surface of 3 times the Earth's radius, the distance from the center of the Earth is:
d = 4 * R
where R is the radius of the Earth.
The acceleration due to gravity at this distance can be calculated using the formula:
a = G * M / d²
where G is the gravitational constant,
M is the mass of the Earth, and
d is the distance from the center of the Earth.
Substituting the values, we get:
a = G * M / (4*R)²
where G = 6.67 × 10⁻¹¹ Nm²/kg² and M = 5.97 × 10²⁴ kg.
Substituting these values, we get:
a = 1.23 m/s²
Therefore, the acceleration due to Earth's gravity at a distance above the Earth's surface of 3 times the Earth's radius is approximately 1.23 m/s².
To practice more questions about 'acceleration':
https://brainly.com/question/460763
#SPJ11
I
or
4.
Displacement/cm
-2-
-4
2-
0
45
0
2.
-21
4-
Displacement/cm
4
(a)
Figures A and B show two graphs which refer to the same transverse wave.
10
Figure A (Displacement at given time)
20
30
10
Figure B (Displacement at given distance from source)
40
X
50
12
60
14
Distance/m
70
(i) Mark clearly two points on figure A which are 2-5 wavelengths apart.
(ii) Mark clearly two points on figure B which are 90° out of phase.
(iii) Calculate the speed of the wave.
Time/s
UY
145
C
Num
Lock
9
Pg Up
6
3
Pg Dn
(iv) Draw another graph in figure A to represent a wave of the same frequency but double
the speed and half the amplitude.
131
Ente
Answer:
(i) On Figure A, two points that are 2.5 wavelengths apart can be marked at the points where the wave crosses the x-axis (i.e., where the displacement is zero) at approximately 12.5 cm and 32.5 cm.
(ii) On Figure B, two points that are 90° out of phase can be marked at any two points where the wave has the same displacement value but is moving in opposite directions. One such pair of points could be at approximately 45 m and 55 m, where the wave has a displacement of approximately 10 cm in opposite directions.
(iii) To calculate the speed of the wave, we can use the formula v = λf, where v is the speed, λ is the wavelength, and f is the frequency. From Figure A, we can see that the wavelength is approximately 20 cm, and from Figure B, we can see that the distance between two consecutive points where the wave has the same displacement value is also approximately 20 cm. Therefore, the wavelength is 20 cm, and the frequency can be calculated as f = 1/T, where T is the time period of the wave. From Figure A, we can see that the time period is approximately 0.16 s (the time it takes for the wave to complete one full cycle), so the frequency is f = 1/0.16 s = 6.25 Hz. Therefore, the speed of the wave is v = λf = 20 cm * 6.25 Hz = 125 cm/s.
(iv) To draw another graph in Figure A to represent a wave of the same frequency but double the speed and half the amplitude, we can simply shift the entire graph to the right so that the peaks and troughs line up with the points on the x-axis where the wave crosses zero, and then reduce the amplitude by a factor of 0.5. The resulting graph would have the same shape as Figure A but with a smaller amplitude and a shorter wavelength (since the speed is double).
(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)
1. How does the speed of coastal erosion compare to other types of erosion?
a spaceship recedes from earth at 0.5 times the speed of light and shines a powerful searchlight onto earth. the photons from this searchlight will hit earth with a velocity of
When a spaceship recedes from Earth at 0.5 times the speed of light and shines a powerful searchlight onto Earth, the photons from this searchlight will hit Earth with a velocity of 1.5 times the speed of light.
According to Einstein's theory of special relativity, it is impossible for an object with mass to travel at the speed of light or faster. However, light always travels at the same speed, which is about 299,792,458 meters per second in a vacuum or 3.00 × 108 meters per second. It is the fundamental postulate of the theory of relativity. Let's say the spaceship is moving away from Earth at v = 0.5c. In this case, the velocity of the photons relative to the spaceship is c, the speed of light. Therefore, to find the velocity of the photons relative to Earth, we must add the velocities. That is:v = u + vw = 0.5c, u = c, v = ?v = u + wv = c + 0.5cv = 1.5c
Therefore, the photons from this searchlight will hit Earth with a velocity of 1.5 times the speed of light.
Know more about velocity
https://brainly.com/question/80295?source=archive
#SPJ11
g consider the mass-spring system which is initially stretched by 1 unit and then released. determine the value of that makes the system critically damped: . find the solution to the critically damped system: now suppose that has value 10 -- which is underdamped.
The given system is not possible because it is not possible to find the value of "x(t)" since "ω" is an imaginary number.
Given that a mass-spring system is stretched by 1 unit and then released. To find the value of "c" that makes the system critically damped, we use the following formula:
ω = √(k/m)
ζc = 1
Thus, the value of "c" is given by:
c = 2 √mk
To find the solution to the critically damped system, we use the following formula:
x(t) = (A + Bt) e^-ωt
Where, A = x0
B = (v0 + ωx0)/ω
Using the given values of the system, the solution to the critically damped system is:
x(t) = (1 + t)e^-3t
Now, suppose that "c" has a value of 10, which is underdamped.
The solution to the underdamped system is given by:
x(t) = e^-ct [C1cos(ωt) + C2sin(ωt)]
Where,
ω = √(k/m - c²/4m²)
ζ = c/2√(km)
Using the given value of "c", the value of "ω" is:
ω = √(k/m - c²/4m²) = √(4 - 100/4) = √(-19)
As "ω" is an imaginary number, it is not possible to find the value of "x(t)". Thus, the given system is not possible.
More on mass-spring system: https://brainly.com/question/31096836
#SPJ11
cannon 1 launches a cannonball straight into the sky, at the same time, cannon 2 launches a cannonball at a 45-degree angle, which cannonball hits the ground first?
Cannonball 2 which is launched at an angle 45°, reaches the ground first when compared to Cannonball 1 which is launched at an angle 90°.
If the range of the cannonball is smaller, it is said to hit the ground first. The range is known to be the horizontal distance travelled by the cannonball.
Mathematically, it is given by the formula,
R = u² sin2θ/g (sin2θ is 2 sinθ cosθ)
where,
R is range
u is initial velocity
g is gravitational force
θ is the angle of launch
So, R value is smaller for the angle 45° when compared to the one at 90°.
Thus, cannonball 2 which is launched at an angle 45° hits the ground first.
To know more about cannonball:
https://brainly.com/question/14261370
#SPJ4
a person is dragging a packing crate of mass 100 kg across a rough horizontal floor where the coefficient of kinetic friction is 0.400. he exerts a force f sufficient to accelerate the crate forward. at what angle above horizontal should his pulling force be directed in order to achieve the maximum acceleration?
The pulling force should be directed at an angle of 45 degrees above horizontal to achieve the maximum acceleration.
To find the angle above horizontal at which the maximum acceleration can be achieved, we can use the following equation: [tex]F - f_k = ma[/tex]
where F is the applied force,[tex]f_k[/tex] is the force of kinetic friction, m is the mass of the crate, and a is the acceleration of the crate.
The force of kinetic friction is given by: [tex]f_k =\mu_k N[/tex]
where μ_k is the coefficient of kinetic friction and N is the normal force.
The normal force is equal in magnitude to the weight of the crate, which is: N = mg
where g is the acceleration due to gravity.
Substituting the values given in the problem, we have:
[tex]f_k = 0.400 * 100 kg * 9.81 m/s^2 = 392.4 N[/tex]
[tex]N = 100 kg * 9.81 m/s^2 = 981 N[/tex]
[tex]f_k = \mu_k N = 0.400 * 981 N = 392.4 N[/tex]
Now we can rewrite the first equation as:
F - 392.4 N = ma
Solving for F, we have:
F = ma + 392.4 N
To achieve the maximum acceleration, the force should be applied at an angle that maximizes the horizontal component of the force. This occurs when the force is applied parallel to the surface of the floor, so the angle above horizontal is 0 degrees. Therefore, the pulling force should be directed horizontally to achieve maximum acceleration.
To know more about maximum acceleration, refer here:
https://brainly.com/question/13674936#
#SPJ11
2. A 9.6 kg object is pulled along a horizontal surface. If the coefficient of friction between the surfaces is 0.11, what is the force of friction?
The force of friction is 10.36 N. Friction is an important concept in physics and plays a crucial role in various phenomena, such as walking, driving, and the operation of machines.
What is Frictions?
Friction is a force that opposes motion between two surfaces that are in contact with each other. It arises due to the roughness of the surfaces and the interlocking of the irregularities on the surfaces. Friction acts in a direction opposite to the direction of motion or the tendency of motion.
The force of friction can be calculated using the formula:
f = μN
where:
f = force of friction
μ = coefficient of friction
N = normal force (the force perpendicular to the surface)
In this case, we are given the coefficient of friction and the mass of the object, but we need to find the normal force. Since the object is being pulled horizontally, the normal force is equal to the weight of the object:
N = mg
where:
m = mass of the object
g = acceleration due to gravity (9.81 m/s^2)
N = (9.6 kg)(9.81 m/s^2) = 94.18 N
Now we can calculate the force of friction:
f = μN = (0.11)(94.18 N) = 10.36 N
Learn more about Frictions from the given link
https://brainly.com/question/15122221
#SPJ1
which of the following force (s) conservative forces? (can be multiple answers) a) spring force b) gravitational force c) friction force d) an applied force
The conservative forces are spring force and gravitational force. The correct options are a) and b),
A conservative force is a force that depends only on the initial and final positions of an object and not on the path taken by the object between those positions. In other words, the work done by a conservative force in moving an object from one position to another is independent of the path taken by the object.
The spring force and the gravitational force are examples of conservative forces. The spring force is a restoring force that acts on an object that is displaced from its equilibrium position, and its magnitude depends only on the displacement of the object. The gravitational force is a force that attracts two masses to each other, and its magnitude depends only on the masses and the distance between them.
On the other hand, the friction force and an applied force are examples of non-conservative forces. The friction force depends on the path taken by the object, as it dissipates the energy of the object into heat and sound. The applied force is a force that is exerted on an object by another object, and its magnitude and direction can change as the object moves, making it path-dependent.
Therefore, the conservative forces are the spring force and the gravitational force. Which are options a) and b)
To know more about conservative forces, refer here:
https://brainly.com/question/199265#
#SPJ11
from port a, a boat sails 26 miles on a bearing of 60°. then the boat changes course to a bearing of 270° until it reaches a point directly north of the port. determine the total distance the boat has sailed to the nearest tenth of a mile.
It states that the ratio of the length of a side of a triangle to the sine of the angle opposite that side is the same for all three sides of the triangle. Hence, the total distance the boat has sailed is 39 miles
From port A, a boat sails 26 miles on a bearing of 60°. Then the boat changes course to a bearing of 270° until it reaches a point directly north of the port. To find: The total distance the boat has sailed.Solution: Let A be the starting point of the boat, and C be the point where the boat reaches directly north of the port. Join AC and let BC be the second leg of the boat.
Join AB.AB = Distance traveled on the first leg = 26 miles
ΔABC,
∠ABC = 90°∠BAC = 60°
∴ ∠ACB = 30°
Using the sine rule in ΔABC,
sin A / AB = sin B / BC sin 60° / 26 = sin 30° / BCB = 26 sin 30° / sin 60°BC = 13 miles now,
the boat is moving northwards from point C.
So, BC is the distance traveled by boat in the direction of 270° angle. Total distance traveled = AB + BC= 26 + 13= 39 miles. Hence, the total distance the boat has sailed is 39 miles (the nearest tenth of a mile).Note: The sine rule is used to solve any triangle, i.e., finding the length of a side or the size of an angle when some or all the sides and angles are known.
To learn more about Distance :
https://brainly.com/question/26550516
#SPJ11
Which type of tide has the lowest tidal range?
Neap tides have the lowest tidal range.
During the neap tides, the gravitational forces of the sun and the moon are perpendicular to each other, resulting in the lowest tidal range. This occurs twice a month, during the first and third quarters of the moon. During these times, the high tides are not as high, and the low tides are not as low.
Neap tides occur because the gravitational forces of the sun and the moon partially cancel each other out, resulting in weaker tidal forces. In contrast, during the full and new moons, the gravitational forces of the sun and the moon are aligned, resulting in stronger tidal forces and higher tidal ranges, known as spring tides.
To know more about neap tides, here
brainly.com/question/29417771
#SPJ4
a 0.493 kg red puck, moving east with a speed of 2.79 m/s, has a head-on collision with a 0.963 kg blue puck initially at rest. assuming a perfectly elastic collision, what will be the speed of the red puck after the collision?
When two objects collide, their total momentum is conserved. In this case, the initial momentum of the system is the sum of the momentum of the red puck and the momentum of the blue puck, which is zero since the blue puck is at rest. Therefore, the initial momentum of the system is equal to the momentum of the red puck, which is 1.370 kg*m/s.
During the head-on collision, the momentum of the red puck is transferred to the blue puck, causing it to move east with a velocity of 2.79 m/s. However, the collision is perfectly elastic, so both the momentum and the kinetic energy of the system are conserved.
Since the blue puck was initially at rest and gains all the momentum of the system, the red puck rebounds with the same momentum as before the collision but in the opposite direction. This results in the conservation of total momentum.
Therefore, the speed of the red puck after the collision is 2.79 m/s in the opposite direction, which is the same as its initial speed. The blue puck, on the other hand, moves with a speed of 2.79 m/s in the same direction as the initial velocity of the red puck.
This type of collision is known as a perfectly elastic collision, where kinetic energy is conserved and there is no loss of energy due to deformation or other factors.
For more details about momentum click here:
https://brainly.com/question/17166755#
#SPJ11
for the reaction 3 a 4 b → 2 c 4 d, what is the magnitude of the rate of change for [b] when [c] is increasing at 2.0 m/s?
For the reaction 3 a 4 b → 2 c 4 d, the magnitude of the rate of change for [b] when [c] is increasing at 2.0 m/s is -3.0 m/s. This is because the stoichiometric coefficient of [b] is -3.0 m/s.
Given the reaction:
3a + 4b → 2c + 4d
The stoichiometric coefficient of [b] is 4, which means that it consumes four moles of [b] for every three moles of [a] that react.
The stoichiometric coefficient of [c] is -2, which means that it is produced at a rate of two moles per reaction.
For the reaction to occur, the rate of consumption of [a] must be equal to the rate of production of [c].
This can be expressed as:-
Δ[a]/Δt = Δ[c]/Δt* (-1/2)
where the negative sign in front of the rate of change of [a] indicates consumption and the negative sign in front of the stoichiometric coefficient of [c] indicates production.
Rearranging this equation gives:-Δ[a]/Δt = (1/2) * Δ[c]/Δt
Multiplying both sides by the stoichiometric coefficient of [b] gives:(-3/4) * Δ[b]/Δt = (1/2) * Δ[c]/Δt
Dividing both sides by Δ[c]/Δt gives:(-3/4) * Δ[b]/Δt * Δ[t]/Δ[c] = (1/2)
Simplifying gives:(-3/4) * Δ[b]/Δ[c] = (1/2)
Multiplying both sides by -4/3 gives:Δ[b]/Δ[c] = (-2/3)
Multiplying both sides by the given rate of change of [c] (2.0 m/s) gives:Δ[b]/Δt = (-2/3) * (2.0 m/s)Δ[b]/Δt = -1.33 m/s
But the question asks for the magnitude, so the answer is: Δ[b]/Δt = 1.33 m/s
To know more stoichiometric coefficient here :
https://brainly.com/question/14465605
#SPJ11
while the stiffness of an elastic cord can be quite constant over a large range of stretch, as a bungee cord is stretched a) expression of the cord's potential engery as a function of
The expression for the cord's potential energy as a function of its stretch shows that the potential energy increases with the square of the stretch, and that it is proportional to the spring constant.
When an elastic cord is stretched, it stores potential energy in the form of elastic potential energy.
The amount of potential energy stored in the cord is directly proportional to the amount of stretch in the cord.
As a bungee cord is stretched, its potential energy increases in a non-linear fashion.
The expression for the cord's potential energy as a function of its stretch can be derived using Hooke's law, which states that the force exerted by a spring is proportional to its stretch.
The force exerted by an elastic cord can be expressed as:
F = -kx
where F is the force,
k is the spring constant,
and x is the amount of stretch in the cord.
The negative sign indicates that the force is opposite in direction to the stretch.
The potential energy stored in the cord can be calculated by integrating the force over the distance of the stretch:
U = ∫Fdx = -∫kx dx = -1/2 [tex]kx^2 + C[/tex]
where U is the potential energy,
C is a constant of integration, and the limits of integration are the un-stretched length of the cord and the stretched length.
The expression for the cord's potential energy as a function of its stretch shows that the potential energy increases with the square of the stretch, and that it is proportional to the spring constant.
This means that a stiffer cord will store more potential energy than a less stiff cord, for the same amount of stretch.
It also means that as the cord is stretched further, the increase in potential energy becomes more significant, making it more difficult to stretch the cord further.
For similar question on potential.
https://brainly.com/question/24142403
#SPJ11
On a position vs time graph, if the line is curved then the object is
going a constant speed or velocity
not moving
not moving at a constant speed or velocity
moving in circles
A curved position graph will have a changing slope, which also indicates a changing velocity. Changing velocity implies acceleration.
Hence, a graph's curvature indicates that an object is accelerating and changing velocity or slope. Try dragging the dot horizontally on the graph below to observe how the slope changes.
a) On a distance-time graph, curved lines show that the pace is altering.b) The slope will change if the velocity changes (i.e., a curved line). If the velocity is increasing, the slope is also increasing (i.e., moving upwards and to the right).c) A straight line will be drawn on a graph of position vs time if the object is travelling with a constant speed. Position is often plotted on the y-axis and time on the x-axis. It is known as a linear graph. The slope of this line will serve as a representation of the item's typical velocity.Learn more about velocity here
https://brainly.com/question/30858191
#SPJ1
a 0.24 kg blob of clay is thrown at a wall with an initial horizontal velocity of 16 m/s if the clay comes to a stop in what is the average horizontal force on the clay due to the wall?
The average horizontal force on the clay due to the wall, given that the clay is thrown at the wall with an initial horizontal velocity of 16 m/s is 42 N
How do i determine the average horizontal force?To obtain the average horizontal force, we shall begin by calculating the deceleration of the blob of clay. Details below:
Initial velocity (u) = 16 m/sFinal velocity (v) = 0 m/sTime (t) = 91 ms = 91×10⁻³ sDeceleration of blob of clay (a) =?a = (v - u) / t
a = (0 - 16) / 91×10⁻³
a = -16 / 91×10⁻³
a = -175.8 m/s²
Finally, we shall determine the average horizontal force on the clay due to the wall. This is illustrated below:
Mass of blob of clay (m) = 0.24 KgDeceleration of blob of clay (a) = -175.8 m/s²Average horizontal force (F) =?Force = mass × deceleration
Average horizontal force = 0.24 × -175.8
Average horizontal force = -42 N
Note: The negative sign indicates that the force is in opposite direction to the motion of the clay.
Thus, the average horizontal force is 42 N
Learn more about force:
https://brainly.com/question/12163222
#SPJ1
complete question
A 0.24 kg blob of clay is thrown at a wall with an initial velocity of 16 m/s. If the clay comes to a stop in 91 ms, what is the average force experienced by the clay?
which of the following would form a negative gravity anomaly? group of answer choices an observed gravitational pull that is stronger than the reference geoid extra mass at depth a zone of open space, such as a cave or cavern a large reserve of metal ore
In order to answer this question, one must recognize the concept of gravity anomaly, the type of material it would exhibit when measured, and how the theoretical value is computed. Therefore, based on the given options: "a zone of open space, such as a cave or cavern" would form a negative gravity anomaly.
Gravity Anomaly is the difference between the observed gravitational acceleration and a theoretical value determined from a mathematical model.
The weight of the Earth affects how gravity is measured. Gravity varies with changes in the mass distribution inside and outside the Earth as well as its rotational movement. To account for these variables, scientists use a reference model called the geoid. The geoid is a theoretical Earth model with an even distribution of mass.
Differences between the theoretical geoid and observed data create a gravity anomaly.
In general, positive gravity anomalies can be caused by additional mass, while negative gravity anomalies can be caused by a deficit of mass. The source of the gravity anomaly can be found by taking observations at several locations surrounding it.
To know more about "Gravity anomaly" refer here:
https://brainly.com/question/13925764#
#SPJ11
when you travel on a moving walkway or an elevator, the linear acceleration of your body is sensed by the
When you travel on a moving walkway or an elevator, the linear acceleration of your body is sensed by the inner ear. The inner ear is responsible for maintaining balance and detecting motion, so it senses the acceleration when the body is in motion on a moving walkway or an elevator.
Acceleration is the rate of change of velocity with respect to time. The change in velocity can be in the form of an increase or decrease in speed, a change in direction, or both. Acceleration is a vector quantity, which means it has both magnitude and direction. It is measured in meters per second squared (m/s²) in the International System of Units (SI).
The inner ear is a small, fluid-filled chamber located in the temporal bone of the skull. It is responsible for hearing and balance. The inner ear contains three semicircular canals and two other structures, the vestibule, and the cochlea. The semicircular canals are responsible for detecting rotational motion, while the vestibule detects linear motion and gravity. The cochlea is responsible for hearing.
Learn more about acceleration:
https://brainly.com/question/460763
#SPJ11
an object is dropped from the top of a building and is observed to take 7.2s to hit the ground. how tall is the building?
The height of the building is 248.83 meters.
We can use the kinematic equations of motion to solve this problem. Specifically, we'll use the equation,
d = (1/2)gt^2
where d is the distance traveled (which in this case is the height of the building), g is the acceleration due to gravity (which is approximately 9.8 m/s^2), and t is the time it takes for the object to hit the ground.
Plugging in the values we know, we get,
d = (1/2)(9.8 m/s^2)(7.2 s)^2
Simplifying further, we get,
d = 248.832 meters
So the building is approximately 248.832 meters tall.
To know more about height, here
brainly.com/question/14248845
#SPJ4
a talented musician can produce a number of overtones on this natural horn. what would be the frequency of the fourth overtone (5th harmonic) produce when the musician is playing a middle c fundamental?
The frequency of the fourth overtone produced when the musician is playing a middle C fundamental is 1280 Hz. Therefore, the correct option is D.
A natural horn (trumpet with no valves) is similar to a pipe open at both ends. A musician plans to create a fundamental frequency of 256 Hz (middle C) using the horn. A talented musician can produce a number of overtones on this natural horn.
To solve this question, you need to know that the frequency of the fundamental frequency in a pipe open at both ends is given by;
f = (n * v) / (2L)
where, f is the fundamental frequency, n is an integer, v is the speed of sound, and L is the length of the pipe.
Since the question has already given us the frequency, we can rearrange the above equation to obtain the length of the pipe. Therefore,
L = (n * v) / (2f).
Since we are dealing with the fourth overtone, we know that n = 5.
Therefore, the frequency of the fourth overtone is given by;
f4 = 5f = 5 * 256 Hz = 1280 Hz
Hence, the frequency of the fourth overtone produced when the musician is playing a middle C fundamental is 1280 Hz (option D).
Note: The question is incomplete. The complete question probably is: A natural horn (trumpet with no valves) is similar to a pipe open at both ends. A musician plans to create a fundamental frequency of 256 Hz (middle C) using the horn. A talented musician can produce a number of overtones on this natural horn. What would be the frequency of the fourth overtone produce when the musician is playing a middle C fundamental? A) 512 Hz B) 768 Hz C) 1024 Hz D) 1280 Hz E) 1536 Hz
Learn more about Fundamental frequency:
https://brainly.com/question/31055667
#SPJ11
A 2.0 kg ball and a 4.0 kg ball are connected by a 3.0-m-long rigid, massless rod. The rod and balls are rotating clockwise about its center of gravity at 25 rpm.
What magnitude torque will bring the balls to a halt in 4.0 s?
The magnitude of the torque that will bring the balls to a halt in 4.0 s is 2.9425 Nm, counterclockwise.
What is the magnitude of the torque?To solve this problem, we need to use the principle of conservation of angular momentum. The angular momentum of the system before the torque is applied is equal to the angular momentum after the torque is applied.
The angular momentum of a rigid body rotating about an axis is given by the formula:
L = Iω
where;
L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.The moment of inertia of a system of particles is given by the formula:
I = Σmr²
where;
m is the mass of each particle, and r is the distance of each particle from the axis of rotation.The angular velocity is related to the rotational speed by the formula:
ω = 2πn
where;
n is the rotational speed in revolutions per second.Given the mass and length of the rod, we can calculate the moment of inertia of the system as follows:
I = m1r1² + m2r2²
Therefore, we can use the formula for the moment of inertia of a rod about its center:
I = (1/12)ml²
I = (1/12)(6 kg)(3.0 m)² = 4.5 kg m²
The angular velocity is given as 25 rpm, which is equivalent to 2.617 rad/s.
Therefore, the initial angular momentum of the system is:
L = Iω = (4.5 kg m²)(2.617 rad/s) = 11.77 kg m²/s
To bring the system to a halt in 4.0 s, we need to apply a torque that will reduce the angular velocity to zero in that time. The magnitude of the torque is given by the formula:
τ = ΔL/Δt
where;
ΔL is the change in angular momentum and Δt is the time taken for the change.Since the final angular momentum is zero, the change in angular momentum is equal to the initial angular momentum. Therefore:
ΔL = -11.77 kg m²/s
Δt = 4.0 s
Substituting these values, we get:
τ = (-11.77 kg m²/s) / (4.0 s) = -2.9425 Nm
Since torque is a vector quantity, we should specify the direction of the torque. Since the system is rotating clockwise, the torque should be applied counterclockwise.
Learn more about torque here: https://brainly.com/question/14839816
#SPJ1
the fm radio band covers the frequency range 88-108 mhz .if the variable capacitor in an fm receiver ranges from 12.4 pf to 18.7 pf , what inductor should be used to make an lc circuit whose resonant frequency spans the fm band? express your answer in microhenries.
The inductor to be used to make an LC circuit whose resonant frequency spans the FM band is 6.30 µH.
An LC circuit comprises a capacitor and an inductor. The resonant frequency of an LC circuit is provided by the formula given below:
f = 1/(2π √LC)
Here, f denotes the resonant frequency, L denotes the inductance of the coil, and C denotes the capacitance of the capacitor.Given, the variable capacitor in an FM receiver ranges from 12.4 pF to 18.7 pF.The frequency range of the FM band covers from 88 MHz to 108 MHz. This means that the frequency range of the LC circuit should also fall within this range. We are to calculate the inductor to be used.To calculate the inductor to be used, we can use the resonant frequency formula and substitute the given values to find the value of the inductor:
88 MHz = 88 × 1[tex]0^{6}[/tex] Hz
108 MHz = 108 × 1[tex]0^{6}[/tex] Hz
Let's start by calculating the value of capacitance: Cmax = 18.7 pF Cmin = 12.4 pF
The resonant frequency can be found by the given formula:
f = 1/(2π √LC)
Let's solve for L using this formula:
f = 88 × 1[tex]0^{6}[/tex] HzC = CmaxL = ?88 × 1[tex]0^{6}[/tex] = 1/(2π √L × 18.7 × 1[tex]0^{-12}[/tex])
Solving for L: L = 6.30 µH
Now, the inductor that should be used to make an LC circuit whose resonant frequency spans the FM band is 6.30 µH.
More on capacitor: https://brainly.com/question/31115194
#SPJ11
what is the minimum number of electoral votes for a state
Each state is entitled to a number of electors equal to its congressional representation . Every state has at least three electors because it has two senators and at least one representative.
What are electoral votes ?In other elections in the United States, candidates are elected directly by popular vote. However, the president and vice president are not directly elected by residents. They are instead chosen by "electors" through a procedure known as the Electoral College.
The use of electors is mandated by the Constitution. It was a middle ground between a popular vote among residents and a vote in Congress.
Your vote for president is counted statewide once you cast your ballot. In 48 states and Washington, D.C., the winner receives all of the state's electoral votes. Maine and Nebraska use a proportional method to elect their representatives.
To know more about Electoral votes , visit ;
brainly.com/question/14488283
#SPJ1
a 2.00 kg mass is attached to a light cord that is wrapped around a pulley of radius 3.80 cm, which turns with negligible friction. the mass falls at a constant acceleration of 2.40 m/s2. find the moment of inertia of the pulley.
The moment of inertia of the pulley when a 2.00 kg mass is attached to a light cord that is wrapped around a pulley of radius 3.80 cm, which turns with negligible friction and the mass falls at a constant acceleration of 2.40 [tex]m/s^2[/tex] is 4.5472[tex]kgm^2[/tex].
The moment of inertia of a pulley can be calculated using the equation I = [tex]mr^2[/tex], where m is the mass of the pulley and r is its radius. In this example, the mass of the pulley is 2.00 kg and its radius is 3.80 cm. So, the moment of inertia is:
I = [tex](2.00 kg)(3.80 cm)^2[/tex]
= 4.5472 [tex]kgm^2[/tex]
To understand why this equation works, it helps to consider the concept of rotational inertia. Rotational inertia is the measure of an object's resistance to changes in its rotational velocity. When a mass is attached to a pulley and accelerates downwards, the pulley must resist the pull of the mass, resulting in an increased rotational velocity. The moment of inertia, then, is a measure of how well the pulley is able to resist changes in rotational velocity.
The equation for calculating the moment of inertia assumes that the mass of the pulley is evenly distributed around its circumference. When a pulley accelerates, it creates a centrifugal force, which increases with an increase in the pulley's rotational velocity. In other words, a pulley with a larger moment of inertia will be able to resist a greater centrifugal force.
In this example, the pulley accelerates downwards at a constant acceleration of [tex]2.40 m/s^2[/tex]. The equation for calculating the moment of inertia provides an accurate measurement of the pulley's rotational inertia in this situation, since it takes into account the mass and the radius of the pulley. By substituting the values for the mass and the radius into the equation, we can calculate the moment of inertia of the pulley to be [tex]4.5472 kgm^2[/tex].
For more such questions on Moment of inertia.
https://brainly.com/question/23009906#
#SPJ11
the electric field just above one face of a copper penny is 2000 n/c. what is the surface charge density on this face of the penny?
The surface charge density on the face of the penny is [tex]5.02 * 10^{-6} C/m^2[/tex].
The electric field just above one face of the penny is given as 2000 N/C.
The electric field just above the surface of a conductor is given by the equation E = σ/ε₀, where σ is the surface charge density, and ε₀ is the electric constant.
Rearranging the equation to solve for σ, we get σ = ε₀ * E.
Plugging in the values, we get σ = [tex](8.85 * 10^{-12} C^2/N m^2) * 2000 N/C = 1.77 * 10^{-8} C/m^2.[/tex]
However, this value is for both the top and bottom faces of the penny, so we need to divide by 2 to get the surface charge density for only one face, which gives [tex]5.02 * 10^{-6} C/m^2[/tex]
To know more about surface charge density, refer here:
https://brainly.com/question/17438818#
#SPJ11
Wavelength
(meters)
Radio Microwave Infrared
10
102
10-5
About the size of...
Visible Ultraviolet
5x106
10
X-ray Gamma Ray
10-10
10 10-12
www www
tt
214 à & f &
Buildings Humans Honey Bee Pinpoint Protozoans Molecules Atoms Atomic Nuclei
A. visible light
C. gamma rays
According to this chart, which form of electromagnetic
radiation has the longest wavelength?
B. ultraviolet light
D. radio waves
Please help 30 points and will mark brain thing
The form of electromagnetic radiation with the longest wavelength according to the chart is radio waves, which have a wavelength of [tex]10^{5}[/tex]meters. So, the correct answer is D. radio waves.
What is Wavelength?
Wavelength is a physical quantity that measures the distance between two consecutive peaks or troughs of a wave. It is usually denoted by the Greek letter lambda (λ) and is measured in units of length, such as meters (m), centimeters (cm), or nanometers (nm). In other words, wavelength is the distance over which a wave repeats itself.
The question asks which form of electromagnetic radiation has the longest wavelength. Based on the chart, the answer is D. radio waves. Radio waves have wavelengths of about 10 meters to [tex]10^{5}[/tex] meters, which is much longer than the wavelengths of visible light, ultraviolet light, X-rays, and gamma rays. In fact, radio waves are about the same size as buildings, while gamma rays are about the same size as atomic nuclei.
Learn more about Wavelength from the given link
https://brainly.com/question/10750459
#SPJ1
which type of star has the longest lifetime? group of answer choices a low mass star both low mass and high mass stars can have the same lifetime a high mass star
Low mass stars typically have the longest lifetimes because they burn fuel more slowly. High mass stars, on the other hand, burn through their fuel more quickly and have shorter lifetimes.
Low mass stars have lifetimes measured in billions of years, while high mass stars have lifetimes measured in millions of years. A low mass star has the longest lifetime among the given options. This is because the rate of energy production in a low-mass star is lower compared to a high-mass star. Thus, the low mass star uses its energy source at a slower pace than the high mass star.
A low mass star is a star that has a mass lower than that of the sun. It has a surface temperature of about 2,500°C, a luminosity that is less than 10 percent of that of the sun, and a size that is smaller than the sun. The hydrogen in the core of a low-mass star fuses more slowly than in high-mass stars, which means they burn their fuel over a longer period of time. A low mass star takes a longer time to use up all its hydrogen than a high mass star. The larger the mass of a star, the more energy it uses up, and the shorter its life span. The hydrogen fusion in a low mass star is a slow process because of its lower temperature and density, hence it takes a longer time to exhaust its fuel. Therefore, a low mass star has the longest lifetime.
Learn more about low mass star:
https://brainly.com/question/18253124
#SPJ11
define wavelength and amplitude. when considering color vision, how does our visual system interpret wavelength? amplitude? provide examples to illustrate your answer.
When we consider color vision, the visual system interprets wavelength and amplitude. The definition of wavelength and amplitude is given below.
Wavelength is the distance between two points, measured in the direction of propagation, that correspond to the same phase of the wave. Its symbol is λ. The distance traveled by one full cycle of the wave is its wavelength.
The human eye has a visual spectrum of wavelengths ranging from 400 to 700 nanometers. Amplitude is the extent of displacement or change in the oscillatory motion of a wave, particularly of a sound wave, electromagnetic wave, or other wave. Its symbol is A. The amplitude of a wave is the height of the wave's crest, measured from its resting position to its highest point.Color vision and how it interprets wavelength and amplitude Our visual system perceives color by interpreting light waves of different wavelengths. When light waves enter our eyes, they are broken down into different wavelengths, which our eyes interpret as color. When our eyes see light of different wavelengths, they appear to be different colors. The shorter the wavelength, the bluer the light appears, and the longer the wavelength, the redder it appears.
As a result, if we consider color vision, our visual system interprets wavelength and amplitude. The human eye sees different colors by interpreting different wavelengths of light. For example, when we see a rainbow, we can see all of the colors, such as red, orange, yellow, green, blue, indigo, and violet. The rainbow has a wavelength spectrum ranging from 400 to 700 nanometers.A rainbow is a natural phenomenon that occurs when light is refracted by water droplets, producing a spectrum of colors. Another instance of color vision is a sunset. The sky appears red and orange during a sunset because the longer wavelengths of light are refracted more than the shorter ones. When light waves travel through the atmosphere and bounce off the Earth's surface, this occurs.
Learn more about visual system at: brainly.com/question/29557195
#SPJ11