Yes, a solid Cu(OH)2 will form when 0.075 g KOH is dissolved in 1.0 L of 1.0 x 10^-3 M Cu(NO3)2. 0.107 g of solid Cu(OH)2 will form.
First, we need to determine the amount of Cu2+ ions present in the solution:
1.0 x 10^-3 M Cu(NO3)2 means that there are 1.0 x 10^-3 moles of Cu2+ ions per liter of solution.
Next, we can use stoichiometry to determine the amount of OH- ions that will react with the Cu2+ ions to form Cu(OH)2. The balanced chemical equation for this reaction is:
Cu2+ (aq) + 2OH- (aq) → Cu(OH)2 (s)
For every 1 mole of Cu2+ ions, we need 2 moles of OH- ions. Therefore, the total amount of OH- ions needed to react with all of the Cu2+ ions in the solution is:
2 x 1.0 x 10^-3 mol = 2.0 x 10^-3 mol
Now we can use the Ksp of Cu(OH)2 to calculate the concentration of Cu2+ and OH- ions in the solution. The Ksp expression for Cu(OH)2 is:
Ksp = [Cu2+][OH-]^2
Since we know the Ksp value for Cu(OH)2, we can solve for either [Cu2+] or [OH-]. Let's solve for [OH-]:
Ksp = [Cu2+][OH-]^2
4.8 x 10^-20 = (1.0 x 10^-3 M)[OH-]^2
[OH-]^2 = 4.8 x 10^-17
[OH-] = 2.2 x 10^-9 M
Therefore, the concentration of OH- ions in the solution is 2.2 x 10^-9 M. Since we need 2 moles of OH- ions for every mole of Cu2+ ions, we know that the concentration of Cu2+ ions is half of the concentration of OH- ions:
[Cu2+] = 1.1 x 10^-9 M
Finally, we can use the molar mass of Cu(OH)2 to determine the mass of solid that will form:
Molar mass of Cu(OH)2 = 97.56 g/mol
1 mole of Cu(OH)2 is formed for every mole of Cu2+ ions, so the mass of Cu(OH)2 that will form is:
0.0011 mol x 97.56 g/mol = 0.107 g
Therefore, 0.107 g of solid Cu(OH)2 will form when 0.075 g KOH is dissolved in 1.0 L of 1.0 x 10^-3 M Cu(NO3)2.
For more such questions on solid , Visit:
https://brainly.com/question/28631710
#SPJ11
what is the original pressure of the gas ?
The original pressure of gas is 4 atm for given volume of 30 liters . This is taken out by boyle law.
What is boyle law ?Boyle's law is an experimental gas law that specifies the relationship between pressure and volume of a confined gas. It is also known as the Boyle-Mariotte law or Mariotte's law (particularly in France). Boyle's law states that the absolute pressure exerted by a given mass of an ideal gas is inversely proportional to the volume it occupies within a closed system if the temperature and amount of gas remain constant.According to Boyle's Law, while the temperature of a given mass of confined gas remains constant, the product of its pressure and volume remains constant as well. When comparing the same substance under two sets of conditions
To know more about boyle law , visit ;
brainly.com/question/30367067
#SPJ1
how many different alkenes result when 3-bromo-3-methylheptane is treated with a strong base? select answer from the options below 6 3 5 2 4
The number of alkenes formed depends on the position of the bromine and the methyl group on the carbon chain.
What are alkenes?An alkene is described as a hydrocarbon containing a carbon–carbon double bond and often used as synonym of olefin, that is, any hydrocarbon containing one or more double bonds.
When 3-bromo-3-methylheptane is treated with a strong base, an elimination reaction occurs, resulting in the formation of alkenes.
The elimination reaction happens by removing a proton from a beta-carbon (i.e., a carbon adjacent to the carbon bearing the bromine atom) and the bromine atom to form an alkene.
Learn more about alkenes at: https://brainly.com/question/24270289
#SPJ1
write the chemical equation for the ion pairing of sr2 (aq) and c2o42-(aq) leading to their soluble ion pair.
The chemical equation for the ion pairing of Sr2+ (aq) and C2O42- (aq) leading to their soluble ion pair is given by the following chemical equation: Sr2+ (aq) + C2O42- (aq) ⇌ SrC2O4 (s).
Here, Sr2+ (aq) is an aqueous solution of strontium ions and C2O42- (aq) is an aqueous solution of oxalate ions. When these two solutions are mixed, they undergo a reaction to form a precipitate of strontium oxalate (SrC2O4) which is a soluble ion pair.
The reaction is reversible because the soluble ion pair can dissociate into its constituent ions under certain conditions. The solubility of the ion pair is determined by the equilibrium constant (Ksp) of the reaction which is given by the following equation: Ksp = [Sr2+][C2O42-] where [Sr2+] and [C2O42-] are the concentrations of strontium ions and oxalate ions in the solution, respectively.
Thus, the chemical equation for the ion pairing of Sr2+ (aq) and C2O42- (aq) leading to their soluble ion pair is: Sr2+ (aq) + C2O42- (aq) ⇌ SrC2O4 (s).
Read more about reaction;
https://brainly.com/question/24795637
#SPJ11
for a second order reaction with an initial concentration of reactant of 64 m, what concentration of the reactant is left after three half lives?
After three half-lives, the concentration of the reactant will be 1/8 of its initial concentration. This means that the remaining concentration of the reactant after three half-lives will be 8 m.
A second order reaction is one that has a rate proportional to the product of the concentration of two reactants or the square of the concentration of one reactant. In this case, the rate of the reaction is given by the equation:
r = k[A]²
The half-life of a reaction is the amount of time it takes for the concentration of the reactant to decrease by half. The half-life of a second-order reaction is given by the equation:
t½ = 1 / (k[A]₀)
Where k is the rate constant, [A]₀ is the initial concentration of the reactant, and t½ is the half-life of the reaction. After one half-life, the concentration of the reactant will be [A] = [A]₀ / 2
After two half-lives, the concentration of the reactant will be [A] = [A]₀ / 4
After three half-lives, the concentration of the reactant will be [A] = [A]₀ / 8
Given that the initial concentration of the reactant is 64 M, the concentration of the reactant after three half-lives is:
[A] = [A]₀ / 8[A] = 64 / 8[A] = 8 M
Therefore, the concentration of the reactant that is left after three half-lives is 8 M.
For more such questions on half-life , Visit:
https://brainly.com/question/23191712
#SPJ11
A tree bears 73 individual pieces of fruit each year. Suppose you own an orchard tht contains 120 of these trees.
a. How much fruit will the orchard produce each year?
b. The upkeep and care of the orchard costs you $850 a year. At what prices will you have to sell each piece of fruit just to break even?
The orchard will produce 8760 individual pieces of fruit each year.
What is break even ?
Break even refers to the point at which the total cost of producing a product or providing a service is equal to the total revenue generated from selling that product or service. At the break-even point, there is no profit or loss, and the business is said to be "breaking even."
In other words, the break-even point is the level of sales at which the business is earning enough revenue to cover all its costs, including fixed costs (e.g., rent, salaries) and variable costs (e.g., cost of goods sold, marketing expenses). Beyond this point, any additional sales or revenue will generate a profit for the business.
a. To calculate how much fruit the orchard will produce each year, we need to multiply the number of trees by the number of fruits each tree bears:
Total number of fruit = 120 trees × 73 fruit/tree
Total number of fruit = 8760
Therefore, the orchard will produce 8760 individual pieces of fruit each year.
b. To calculate the price at which you need to sell each piece of fruit to break even, we need to divide the total cost of upkeep and care by the total number of fruit produced, and then add this to the cost of producing each piece of fruit. This will give us the minimum price at which we need to sell each piece of fruit to cover our costs:
Cost per fruit = (Upkeep cost + Cost of producing each fruit) / Total number of fruit
Since the upkeep and care of the orchard costs $850 per year, and the orchard produces 8760 individual pieces of fruit each year, the cost of upkeep and care per fruit is:
Cost of upkeep and care per fruit = $850 / 8760
Cost of upkeep and care per fruit = $0.097
Therefore, the minimum price at which we need to sell each piece of fruit to cover our costs is:
Minimum price per fruit = Cost per fruit + Cost of upkeep and care per fruit
Minimum price per fruit = Cost of producing each fruit + $0.097
Without information about the cost of producing each piece of fruit, we cannot calculate the minimum price required to break even.
To know more about Trees visit :-
https://brainly.com/question/2189834
#SPJ1
.
determine the mass percent (to the hundredths place) of h in sodium bicarbonate (nahco3). 14.30 27.36 1.20 57.14 19.05
The mass percent of hydrogen in sodium bicarbonate (NaHCO3) is 1.20% (to the hundredths place).
To determine the mass percent of hydrogen (H) in sodium bicarbonate (NaHCO3), we need to first calculate the molar mass of NaHCO3, which is:
NaHCO3 = 1(Na) + 1(H) + 1(C) + 3(O)
= 23.00 + 1.01 + 12.01 + (3 x 16.00)
= 84.01 g/mol
The mass of hydrogen in one mole of NaHCO3 is 1.01 g, since there is only one hydrogen atom in each molecule of NaHCO3.
Therefore, the mass percent of hydrogen in NaHCO3 can be calculated as follows:
mass percent H = (mass of H / mass of NaHCO3) x 100%
= (1.01 g / 84.01 g) x 100%
= 1.20%
For more question on sodium bicarbonate click on
https://brainly.com/question/1596599
#SPJ11
what is the correct way to write the formula of the compound formed by a hydrogen ion and a sulfate ion? group of answer choices h 2 (so 4 ) 2 hso 4 h 2 so 4 h(so 4 ) 2
The correct way to write the formula of the compound formed by a hydrogen ion and a sulfate ion is c. h2so4.
A compound is a pure substance composed of two or more different atoms chemically bonded in a fixed proportion. The atoms in a compound can be combined in a range of methods and in various ratios. When atoms of two or more elements chemically combine, they form a compound.
The hydrogen ion or proton has a chemical symbol of H+. Chemical formula of sulfate ion. The chemical formula for sulfate ion is SO42-. Formula of the compound formed by a hydrogen ion and a sulfate ion. The formula of the compound formed by a hydrogen ion and a sulfate ion is h2so4.
Learn more about proton at:
https://brainly.com/question/1264222
#SPJ11
the strongest intermolecular forces are nearly as strong as the forces that hold atoms together in a molecule. true false
The statement "the strongest intermolecular forces are nearly as strong as the forces that hold atoms together in a molecule" is a false statement. The forces that hold atoms together within a molecule are primarily chemical bonds that are incredibly powerful forces.
Intermolecular forces are the forces of attraction and repulsion between different molecules or particles. In contrast, intramolecular forces refer to the forces that hold atoms together within a molecule.
There are three main types of intermolecular forces:
Van der Waals forcesHydrogen bondsDipole-dipole interactionsThese forces are considerably weaker.
The forces that hold atoms together within a molecule are primarily chemical bonds that are incredibly powerful forces. The forces of chemical bonds involve the sharing or transfer of electrons between atoms. Covalent bonds, ionic bonds, and metallic bonds are examples of chemical bonds that hold atoms together in molecules. These bonds are so strong that they are difficult to break.
To learn more about intermolecular forces refer - https://brainly.com/question/20162721
#SPJ11
on the basis of the information in the chart and what you know about atomic structure, which elements form stable but reactive diatomic gases?
On the basis of the information in the chart and what you know about atomic structure, the elements that form stable but reactive diatomic gases are hydrogen, nitrogen, oxygen, and fluorine.
A diatomic element is an element that can form two-atom molecules. The diatomic elements' covalent bonds keep these molecules together. The prefix "di-" in "diatomic" indicates two and diatomic gases, or simply diatomics, are gases consisting of molecules with two atoms of the same or different chemical elements in their molecule.
The four most well-known diatomic elements are hydrogen (H2), nitrogen (N2), oxygen (O2), and fluorine (F2). The general formula for diatomic molecules is X2, where X represents an element. Some other examples include chlorine (Cl2), bromine (Br2), and iodine (I2). A stable but reactive diatomic gas is a diatomic gas that is chemically stable enough to exist as a molecule but is chemically reactive. These diatomic gases usually do not react spontaneously or violently, but they may react with other chemicals under the proper conditions.
Learn more about covalent bonds at:
https://brainly.com/question/11674395
#SPJ11
147 grams of argon to liters
Answer:
Explanation:
3.6797837188344116 mol
if the actual yield for a reaction was 5.6 g, and the percent yield was 84.3%, what was the theoretical yield?
The theoretical yield was 6.64 g
To calculate the theoretical yield of a reaction, we need to use the percent yield formula and rearrange it to solve for the theoretical yield. The percent yield is defined as:
percent yield = (actual yield / theoretical yield) x 100%
Rearranging this equation, we can solve for the theoretical yield:
theoretical yield = actual yield / (percent yield/100%)
Plugging in the given values, we get:
theoretical yield = 5.6 g / (84.3%/100%)
theoretical yield = 6.64 g
Therefore, the theoretical yield of the reaction was 6.64 g.
To learn more about percent yield refer - https://brainly.com/question/11963853
#SPJ11
calculate the mass of so2 produced when 185 grams of oxygen reacts using this equation: 2cu2s 3o2 ----> 2cu2o 2so2 step by step
To calculate the mass of SO2 produced when 185 grams of oxygen reacts, we need to use the following equation: 2Cu2S + 3O2 ---> 2Cu2O + 2SO2.
Step 1: Calculate the molar mass of oxygen.
The molar mass of oxygen is 32.00 g/mol.
Step 2: Calculate the number of moles of oxygen.
To calculate the number of moles of oxygen, we need to divide the given mass of oxygen (185 g) by the molar mass of oxygen (32.00 g/mol).
Therefore, the number of moles of oxygen is 5.78 moles (185 g/32.00 g/mol = 5.78 moles).
Step 3: Calculate the molar ratio between oxygen and SO2.
The equation shows that for every 3 moles of oxygen, 2 moles of SO2 are produced. Therefore, the molar ratio between oxygen and SO2 is 3:2.
Step 4: Calculate the number of moles of SO2.
Since the number of moles of oxygen is 5.78 moles and the molar ratio between oxygen and SO2 is 3:2, the number of moles of SO2 is 3.85 moles (5.78 moles x 2/3).
Step 5: Calculate the molar mass of SO2.
The molar mass of SO2 is 64.07 g/mol.
Step 6: Calculate the mass of SO2 produced.
To calculate the mass of SO2 produced, we need to multiply the number of moles of SO2 (3.85 moles) by the molar mass of SO2 (64.07 g/mol).
Therefore, the mass of SO2 produced is 247.5 g (3.85 moles x 64.07 g/mol = 247.5 g).
To know more about mass click here:
https://brainly.com/question/19694949
#SPJ11
give the charge of the stable ion formed by each of the following. include the sign ( or -) and magnitude (numerical value) of the charge in every case. (note: give only the charge, not the formula of the ion.) 1. a group 2a metal 2. a group 3a metal
A group 2A metal will form a stable ion with a charge of +2. Examples of group 2A metals include magnesium (Mg), calcium (Ca), and strontium (Sr).
A group 3A metal will form a stable ion with a charge of +3. Examples of group 3A metals include boron (B), aluminum (Al), and gallium (Ga).
For more questions like charge visit the link below:
1. A metal of group 2A, plus
2. A metal from group 3A, - 3+
A What is charge?
Both positive and negative charges are possible. We are aware that a positive charge is created when a species has more protons than electrons. A negative ion, on the other hand, is one that has more electrons than protons.
We now understand that metals mostly produce positive ions. The group that the metal belongs to in the periodic table determines how much charge is on the ions.
The ions' charges are as follows:
1. A metal of group 2A, plus
2. A metal from group 3A, - 3+
https://brainly.com/question/28531714
#SPJ11
tetracycline is an antibiotic containing multiple functional groups. which functional groups are present in this molecule? (select all that apply).
Answer: Tetracycline is an antibiotic containing multiple functional groups, including an amine group, an alcohol group, a carboxylic acid group, and a ketone group.
Tetracycline is an antibiotic containing multiple functional groups. The functional groups present in this molecule are an amine group, an alcohol group, a carboxylic acid group, and a ketone group.
The amine group is composed of nitrogen and hydrogen atoms, and is often found in organic compounds. It is also known as an amino group.
The alcohol group is composed of an oxygen and hydrogen atom bonded to a hydrocarbon group, usually a single bond. It is also known as a hydroxyl group.
The carboxylic acid group is composed of a carbonyl and hydroxyl groups, and is often found in organic compounds. It is also known as an carboxyl group.
The ketone group is composed of two oxygen atoms and two carbon atoms, and is often found in organic compounds. It is also known as a keto group.
In conclusion, tetracycline is an antibiotic containing multiple functional groups, including an amine group, an alcohol group, a carboxylic acid group, and a ketone group.
Learn more about antibiotic here:
https://brainly.com/question/30012458#
#SPJ11
if a chemical is spilled onto the face, wait until you have washed the chemicals off before removing your glasses. group of answer choices true false
Never use a spatula to empty a bottle with solid chemicals. You will contaminate the chemical if you do this. Pour solid into your straight in place of it.
If you spill a chemical on oneself, what should you do?If this solid substance or a liquid containing it comes in touch with your skin, immediately wash it with soap and water to remove any contamination. After cleaning, seek medical assistance if the irritation continues.
What should you do if you just splattered a chemical on someone's face?The area should be immediately thoroughly flushed with water for at least 15 minutes. Try to prevent cross-contamination if flushing your eyes is not necessary.
To know more about solid chemicals visit:-
brainly.com/question/14966269
#SPJ1
how many moles of iron metal are produced when 3.2 mol iron (iii) oxide and 2.3 mol carbon monoxide react? fe2o3 3co -------> 2fe 3co2 step by step
Answer : When 3.2 moles of iron (III) oxide and 2.3 moles of carbon monoxide react, 2 moles of iron metal are produced.
2 moles of iron metal are produced when 3.2 moles of iron (III) oxide (Fe2O3) and 2.3 moles of carbon monoxide (CO) react. The balanced chemical equation for this reaction is: Fe2O3 + 3CO --> 2Fe + 3CO2.
This reaction is a combustion reaction, meaning it involves the oxidation of iron (III) oxide by the carbon monoxide. Oxygen from the iron oxide is released as carbon dioxide (CO2) and the iron is left in the reduced form, or elemental iron (Fe).
To calculate the moles of iron metal produced, the mole ratio of Fe2O3 to Fe must be determined. From the balanced equation, it can be seen that for every 1 mole of Fe2O3, 2 moles of Fe are produced. Therefore, to calculate the number of moles of Fe, multiply the number of moles of Fe2O3 by 2. In this case, that would be 3.2 moles of Fe2O3 x 2 = 6.4 moles of Fe.
Finally, to get the number of moles of Fe metal produced, subtract the number of moles of Fe2O3 from the number of moles of Fe. In this case, 6.4 moles of Fe - 3.2 moles of Fe2O3 = 2 moles of Fe metal.
Know more about iron (III) oxide here:
https://brainly.com/question/19392610
#SPJ11
How many liters in 9.87 moles of 0^3
The volume (in liters) in which 9.87 moles of ozone, O₃ can occupy is 221.09 liters
How do i determine the volume?From the question given above, the following data were obtained:
Number of mole of ozone, O₃ = 9.87 molesVolume of ozone, O₃ =?The volume of 9.87 moles of ozone, O₃ can be obtained as illustrated below:
From the ideal gas theory, we understood that:
1 mole of ozone, O₃ = 22.4 Liters
Therefore,
9.87 moles of ozone, O₃ = (9.87 moles × 22.4 Liters) / 1 mole
9.87 moles of ozone, O₃ = 221.09 liters
Thus, we can conclude that the volume is 221.09 liters
Learn more about volume:
https://brainly.com/question/225322
#SPJ1
A 0.682-gram sample of an unknown weak monoprotic organic acid, HA, was dissolved in sufficient water to make 50.0 mL of solution and was titrated with a 0.135 M NaOH solution. After the addition of 10.6 mL of base, a pH of 5.65 was recorded. The equivalence point was reached after the addition of 27.4 mL of the 0.135 M NaOH.
a. Calculate the number of moles of acid in the original sample.
b. Calculate the molar mass of the organic acid.
c. Calculate the molarity of the unreacted HA remaining in the solution at pH = 5.65.
a. The number of moles of acid in the original sample is 0.00369. b. The molar mass of the organic acid is 0.135 M. c. The molarity of the unreacted HA remaining in the solution at pH 5.65 is 0.045 M
Calculation:
a. The equivalence point was reached after the addition of 27.4 mL of the 0.135 M NaOH.a.
Moles of NaOH = M × V = 0.135 M × 27.4 mL = 0.00369 moles
Using the balanced equation, we find that the number of moles of HA is equal to the number of moles of NaOH at the equivalence point. HA + NaOH → NaA + HOH0. 00369 moles of NaOH are needed to react with 0.00369 moles of HA.
b. Molar mass of HA = (mass of HA) / (number of moles of HA) = 0.682 g / 0.00369 moles = 184.7 g/molc. Calculate the molarity of the unreacted HA remaining in the solution at pH = 5.65.The pH of the solution was 5.65 after 10.6 mL of NaOH were added.
c. To calculate the molarity of the remaining HA, we first need to find the pKa of the acid.
pH = pKa + log([A-]/[HA])5.65 = pKa + log([A-]/[HA]). We know that at the equivalence point, [A-] = [HA] / 2.
Therefore,[A-] = 0.00369 moles / 2 = 0.00185 moles[Ligand] = (moles of ligand) / (liters of solution). We need to find [HA] in moles/L, so we need to find [A-] in moles/L. We can use the molarity of the NaOH solution to do this. [NaOH] = 0.135 M
moles of NaOH = [NaOH] × (liters of solution)moles of NaOH = 0.135 M × 0.0106 L.
moles of NaOH = 0.00144 moles
moles of HA at pH = 5.65 = moles of HA initially - moles of NaOH added = 0.00369 moles - 0.00144 moles
= 0.00225 moles[HA] = 0.00225 moles / 0.050 L = 0.045 M
To know more about molarity, refer here:
https://brainly.com/question/17238709#
#SPJ11
Calculate the molality of a solution that contain 90. 0g of benzoic acid in 350 ml of water
The molality of a solution that contain 90. 0g of benzoic acid in 350 ml of water is 2.102 mole / kg.
The molarity of a solution is defined as the number of moles of solute dissolved in one liter of solution. Molarity can be expressed as the ratio of a solvent's moles to a solution's total liters. Both the solute and the solvent are part of the solution in calculating the molarity. It is the ratio of the solute moles to the solvent kilograms.
Molarity = Number of moles of solute Volume of solution in liter.
moles of C6H5COOH = 90.0 g / 122.12g/mole
= 0.736 mole
Now we have to calculate the mass of water.
= (350 ml) (1 g/ml) * 1L/ 1000ml
= 0.350 kg
Molarity = 0.736 mole/ 0.350 kg
= 2.102 mole / kg.
To learn more about Molarity
https://brainly.com/question/30404105
#SPJ4
an oxide of rhenium crystallizes with rhenium atoms at each of the corners and oxygen atoms in the middle of each edge of the cell. what is the formula of the oxide?
An oxide of rhenium crystallizes with rhenium atoms at each of the corners and oxygen atoms in the middle of each edge of the cell. The formula of the oxide is ReO2.
An oxide is a chemical compound of at least one oxygen atom and one other element. One of the most common oxides is carbon dioxide, which is made up of one carbon atom and two oxygen atoms. Oxides are found in many other minerals and rocks, as well as in the atmosphere and they may be divided into acidic oxides and basic oxides on the basis of their chemical behavior. Formula of the oxide the rhenium atoms are present at each of the corners, whereas the oxygen atoms are located in the middle of each edge of the cell, as a result, the oxide formula will be ReO2.
When the structure of the oxide is observed, it is observed that the oxide is made up of tetrahedra in which the oxygen atoms are positioned at the vertices and the rhenium atoms are positioned at the centre of each face. In this, the atoms are arranged in the form of a cubic unit cell, with the oxygen atoms situated at each corner and the rhenium atoms located at the center of each edge. As a result, the oxide formula will be ReO2.
Learn more about rhenium at:
https://brainly.com/question/2692749
#SPJ11
how many different alkenes result when 2-bromohexane is treated with a strong base? select answer from the options below 1 2 3 4
When 2-bromohexane is treated with a strong base the alkenes that would result is given as 1
What alkenes would resultWhen 2-bromohexane is treated with a strong base, such as sodium ethoxide (NaOEt) or sodium hydroxide (NaOH), it undergoes elimination reaction (also called dehydrohalogenation) to form different alkenes.
The product(s) of the reaction depend on the position of the β-carbon (the carbon next to the bromine atom) that undergoes deprotonation. Since there are two β-carbons in 2-bromohexane, two different alkenes can be formed.
Read more on alkenes here:https://brainly.com/question/29120960
#SPJ1
a solution is 0.30 m in nh3. what concentration of nh4cl would be required to achieve a buffer solution with a final ph of 9.0? recall the hh equation can be written using ph and pka or poh and pkb.
2.69 M of NH4Cl must be added to the solution to create a buffer with a final pH of 9.
A buffer solution is a solution that resists changes in pH when small quantities of an acid or base are added to it. A buffer solution is a solution that can resist changes in pH when acid or base is added to it.
The Henderson-Hasselbalch equation, which relates the pH of a buffer solution to the dissociation equilibrium constant of the weak acid, may be used to determine the pH of a buffer solution. Pka and pH can be used to derive the Henderson-Hasselbalch equation, which is as follows: pH = pKa + log([A-]/[HA]). Here, [A-] is the concentration of conjugate base, and [HA] is the concentration of weak acid. A buffer solution is created by combining a weak acid with its corresponding conjugate base, or a weak base with its corresponding conjugate acid.
When a buffer solution is formed from a weak acid and its conjugate base, it is referred to as an acidic buffer. A buffer solution made up of a weak base and its corresponding conjugate acid is known as a basic buffer. The final pH of a buffer solution is determined by the ratio of the weak acid or base to the conjugate base or acid, as determined by the Henderson-Hasselbalch equation.
pH can be calculated using the following equation: pH = pKa + log([A-]/[HA]). The NH3-NH4+ buffer is commonly used in laboratories. It is made up of ammonia (NH3) and ammonium (NH4+) in a specific ratio. NH3 is a weak base with a Kb value of 1.8 × 10−5, while NH4+ is its conjugate acid, and its Ka value is 5.6 × 10−10.In this problem, we must determine the concentration of NH4Cl required to create a buffer solution with a final pH of 9. Using the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]). Since the solution is 0.30 M in NH3, we know that the [A-] is 0.30 M. We must now figure out what the [HA] is to calculate the concentration of NH4Cl necessary. pH can be rearranged in the following manner: pH = pKa + log([A-]/[HA])pH - pKa = log([A-]/[HA])10^(pH - pKa) = [A-]/[HA]. We can find pKa using the Kb value of NH3: Kw = Ka × Kb = 1 × 10^-14 = 5.6 × 10^-10 × 1.8 × 10^-5Ka = 5.6 × 10^-10 / 1.8 × 10^-5 = 3.11 × 10^-6pKa = -log(Ka) = 5.51. Now, we can calculate [HA] using the following equation: [A-]/[HA] = 10^(pH - pKa) = 10^(9 - 5.51) = 0.0301. Thus, the ratio of [A-]/[HA] is 0.30/0.0301 = 9.97.
This implies that we must add NH4Cl to the solution in order to create an ammonium/ammonia buffer with a ratio of 9.97:1. To achieve this ratio, we must add NH4Cl in such a way that the [NH4+] is 9.97 times higher than the [NH3]. Assuming that the volume of the solution is 1 L, the [NH3] is 0.30 M, and the desired ratio is 9.97:1, we can compute the [NH4+] that will be necessary:[NH4+] = [NH3] × ratio = 0.30 M × 9.97 = 2.99 M. We can now calculate the amount of NH4Cl that must be added to the solution using the following equation:2.99 M - 0.30 M = 2.69 M. Therefore, 2.69 M of NH4Cl must be added to the solution to create a buffer with a final pH of 9.
To know more about buffer click here:
https://brainly.com/question/19093015
#SPJ11
the density of acetic anhydride (c4h6o3) is 1.08 g/ml. if 5.65 ml of acetic anhydride is used in the experiment, then how many moles of acetic anhydride was used?
The number of moles of acetic anhydride used is 0.06 moles.
The number of moles of acetic anhydride (C₄H₆O₃) can be calculated by multiplying the given volume by the given density, and then dividing the result by the molar mass of acetic anhydride. The molar mass of acetic anhydride (C₄H₆O₃) is the sum of the atomic weights of each element.
In this case, we have : Volume (V) = 5.65 mL, Density (ρ) = 1.08 g/mL, and Molar mass (M) = 102.09 g/mol
Solving for the number of moles, we get:
Number of moles (n) = V x ρ / M
n = 5.65 mL x 1.08 g/mL / 102.09 g/mol
n = 0.06 moles of acetic anhydride
Learn more about density here: https://brainly.com/question/1354972.
#SPJ11
a solution is prepared by dissolving 99.7 g of nai in enough water to form 895 ml of solution. calculate the mass % of the solution if the density of the solution is 1.06 g/ml.
The mass % of the solution if the density of the solution is 1.06 g/ml is 10.51%
The mass of NaI = 99.7 g
Volume of the solution = 895 ml
Density of the solution = 1.06 g/ml
To calculate the mass % of the solution, we have to calculate the mass of the solution first.
Step-by-step explanation:
The formula for density is given by:
Density = Mass/Volume
Or,
Mass = Density × Volume
Now, we will calculate the mass of the solution.
Mass = Density × Volume
= 1.06 × 895= 948.7 g
Now, we will calculate the mass % of the solution.
Mass % = (Mass of solute/Total mass of solution) × 100
Mass of solute = 99.7 g
Total mass of solution = 948.7 g
Mass % = (99.7/948.7) × 100
= 10.51%
Therefore, the mass % of the solution is 10.51%.
Learn more about mass %: https://brainly.com/question/26150306
#SPJ11
Use the electron-transfer method to balance this redox equation: Aluminum metal reacts with hydrochloric acid to produce aluminum III chloride and hydrogen gas.
The balanced equation for the redox reaction when Al metal reacts with HCl is 2Al + 6HCl -> 2[tex]AlCl_{3}[/tex] + 3[tex]H_{2}[/tex].
How to balance redox reactions via Electron Transfer Method?To balance the redox equation for the reaction between aluminum metal and hydrochloric acid using the electron transfer method, follow these steps:
Step 1: Write the unbalanced equation:
Al + HCl -> [tex]AlCl_{3}[/tex] + [tex]H_{2}[/tex]
Step 2: Separate the equation into half-reactions:
Oxidation half-reaction: Al -> [tex]Al^{3+}[/tex]
Reduction half-reaction: [tex]H^{+}[/tex] -> [tex]H_{2}[/tex]
Step 3: Balance the atoms in each half-reaction, except for oxygen and hydrogen:
Oxidation half-reaction: Al -> [tex]Al^{3+}[/tex] (already balanced)
Reduction half-reaction: 2[tex]H^{+}[/tex] -> [tex]H_{2}[/tex]
Step 4: Balance the charges in each half-reaction by adding electrons:
Oxidation half-reaction: Al -> [tex]Al^{3+}[/tex] + 3[tex]e^{-}[/tex]
Reduction half-reaction: 2[tex]H^{+}[/tex] + 2[tex]e^{-}[/tex] -> [tex]H_{2}[/tex]
Step 5: Equalize the number of electrons transferred in both half-reactions by multiplying the half-reactions by appropriate factors:
Oxidation half-reaction: 2(Al -> [tex]Al^{3+}[/tex] + 3[tex]e^{-}[/tex] ) -> 2Al -> 2[tex]Al^{3+}[/tex] + 6[tex]e^{-}[/tex]
Reduction half-reaction: 3(2[tex]H^{+}[/tex] + 2[tex]e^{-}[/tex] -> H2) -> 6[tex]H^{+}[/tex] + 6[tex]e^{-}[/tex] -> [tex]H_{2}[/tex]
Step 6: Add the balanced half-reactions back together:
2Al + 6[tex]H^{+}[/tex] -> 2[tex]Al^{3+}[/tex] + 3[tex]H_{2}[/tex]
Step 7: Add back the spectator ions (chloride ions) to complete the balanced equation:
2Al + 6HCl -> 2[tex]AlCl_{3}[/tex] + 3[tex]H_{2}[/tex]
The balanced redox equation using the electron transfer method is:
2Al + 6HCl -> 2[tex]AlCl_{3}[/tex] + 3[tex]H_{2}[/tex]
To know more about Electron Transfer Method:
https://brainly.com/question/30897672
#SPJ11
if you choose to measure the freezing point of a solution of your compound, what would be the objective of the experiment?
The objective of measuring the freezing point of a solution of your compound is: to determine its purity or concentration.
When a compound is dissolved in a solvent, the freezing point of the resulting solution is lower than that of the pure solvent. This is because the solute molecules lower the freezing point of the solvent by interfering with the formation of the crystal lattice. The extent of the depression of the freezing point depends on the concentration of the solute and its nature.
To measure the freezing point of a solution of your compound, the solution is cooled until it begins to solidify. The temperature at which this occurs is recorded as the freezing point of the solution. By comparing the freezing point of the solution with the freezing point of the pure solvent, the concentration or purity of the solute can be calculated using the freezing point depression equation:
ΔTf = Kf · m,
where ΔTf is the freezing point depression, Kf is the freezing point depression constant, and m is the molality of the solute in the solution.
The freezing point depression constant is a property of the solvent and is typically provided in reference tables. Once the molality of the solute is determined, the molar mass or weight percent of the solute can be calculated, allowing for the determination of the purity or concentration of the compound.
To know more about concentration refer here:
https://brainly.com/question/10725862#
#SPJ11
Iron oxide, known as hematite, is the main source of iron for the steel industry. It is created when iron and oxygen combine in a thermal decomposed reaction. It can be described using the equation 4Fe + 3O2 = 2Fe2O3. If 19.2 g of O2 reacts with iron to form 63.84 g of oxide, how much iron in grams was used in the reaction?
The balanced equation for the reaction is:
4Fe + 3O2 -> 2Fe2O3
We are given the mass of oxygen and the mass of iron oxide produced. To find the mass of iron used in the reaction, we need to use stoichiometry to relate the masses of the reactants and products.
First, we can calculate the molar mass of Fe2O3:
Fe2O3 = 2(55.845 g/mol) + 3(16.00 g/mol) = 159.69 g/mol
Next, we can use the mass of iron oxide produced to find the number of moles of Fe2O3:
63.84 g Fe2O3 × (1 mol Fe2O3/159.69 g Fe2O3) = 0.400 mol Fe2O3
Since the reaction produces 2 moles of Fe2O3 for every 4 moles of Fe, we can find the number of moles of Fe:
0.400 mol Fe2O3 × (4 mol Fe / 2 mol Fe2O3) = 0.800 mol Fe
Finally, we can use the molar mass of Fe to convert the number of moles to grams:
0.800 mol Fe × 55.845 g/mol = 44.68 g Fe
Therefore, 44.68 grams of iron were used in the reaction.
how many milliliters of 11.5 m hcl(aq) 11.5 m hcl ( aq ) are needed to prepare 855.0 ml 855.0 ml of 1.00 m hcl(aq)?
74.3 mililiters of 11.5 M HCl (aq) is required to prepare 855.0 mL of 1.00 M HCl (aq).
Dilution formulaTo calculate how many milliliters of 11.5 M HCl (aq) are required to prepare 855.0 mL of 1.00 M HCl (aq), we will utilize the dilution formula.
The formula for dilution is:
C₁V₁ = C₂V₂
Where:
C₁ = initial concentration
V₁ = initial volume
C₂ = final concentration
V₂ = final volumeIn this case
C₁ = 11.5 M
V₁ = ?
C₂ = 1.00 M
V₂ = 855.0 mL
Firstly, let's rearrange the formula and solve for V₁ by substituting the given values. We will then calculate the value of V₁:
C₁V₁ = C₂V₂
11.5 M V₁ = 1.00 M × 0.855 L
V₁ = 1.00 M × 0.855 L / 11.5 M = 0.07434 l or 74.34 ml
learn more about dilution
https://brainly.com/question/27097060
#SPJ11
all of the following are characteristics of nitrous oxide except: weak anesthetic. strong analgesic. strong amnesia. respiratory depression.
The correct answer for the given question is option B strong analgesic.
What is nitrous oxide ?
Nitrous oxide, also known as laughing gas, is a colorless, slightly sweet-smelling gas with the chemical formula N2O. It is a naturally occurring compound that can be synthesized for various uses, including medical and dental procedures, as well as for use as a propellant in whipped cream dispensers and racing cars.
Nitrous oxide is a weak anesthetic, meaning it does not provide complete loss of consciousness but can help reduce anxiety and pain during medical procedures. It is commonly used in combination with other anesthetics, such as oxygen or intravenous sedatives, to achieve a deeper level of anesthesia.
Nitrous oxide is a weak anesthetic and does not provide strong analgesia, but it does have some analgesic properties. It also has strong amnesic effects, meaning that patients may not remember the procedure after it is completed. However, it generally does not cause respiratory depression unless used in very high concentrations.
To know more about respiration visit :-
https://brainly.com/question/22673336
#SPJ1
to what volume (in ml) would you need to dilute 45.0 ml of a 1.20 m solution of nabr to make a 0.0400 m solution of nabr?
To dilute 45.0 ml of a 1.20 M solution of NaBr to a 0.0400 M solution, you need to add enough water to a total volume of 226.25 ml.
The dilution formula is M1V1 = M2V2, where M1 and V1 are the initial molarity and volume of the solution and M2 and V2 are the desired molarity and volume of the dilute solution.
Calculate V2 (the desired volume) by rearranging the equation and solving for V2: V2 = (M1V1) / M2.
V2 = (1.20M * 45.0ml) / 0.0400M = 226.25ml.
Therefore, to create a 0.0400 M solution of NaBr from a 1.20 M solution of NaBr, you need to add enough water to a total volume of 226.25 ml.
to know more about solution refer here:
https://brainly.com/question/30665317#
#SPJ11