Answer:
Prosthetic Devices
Explanation:
I’m a genius and it’s the answer :D
1500 torr is how many kPa
Answer:
200 kPa
(it is actually 199.999, but rounding up it is 200)
hope this helps!
Answer:
1500 Torr is about 200 kPa
Summarize how the structure of organic compounds allows them to function as pigments in 2 – 3 sentences
The structure of organic compounds allows them to function as pigments through chromophore and acid or basic groups.
What is a Pigment?This is defined as a colored substance which is completely or nearly insoluble in water.
The structure of organic compounds allows them to function as pigments include chromophore and the acid or basic groups such as OH, SO3H, etc.
Read more about Pigment here vhttps://brainly.com/question/1056549
#SPJ1
I have two solutions : solution A has 6 moles of solute in 2 L of solvent; solution B has 6 moles of solute in 1 L of solvent . Which one is more concentrated ?
Answer:
Many people have a qualitative idea of what is meant by concentration. Anyone who has made instant coffee or lemonade knows that too much powder gives a strongly flavored, highly concentrated drink, whereas too little results in a dilute solution that may be hard to distinguish from water. In chemistry, the concentration of a solution is the quantity of a solute that is contained in a particular quantity of solvent or solution. Knowing the concentration of solutes is important in controlling the stoichiometry of reactants for solution reactions. Chemists use many different methods to define concentrations, some of which are described in this section.
Molarity
The most common unit of concentration is molarity, which is also the most useful for calculations involving the stoichiometry of reactions in solution. The molarity (M) is defined as the number of moles of solute present in exactly 1 L of solution. It is, equivalently, the number of millimoles of solute present in exactly 1 mL of solution:
molarity=molesofsolutelitersofsolution=mmolesofsolutemillilitersofsolution(4.5.1)
(4.5.1)molarity=molesofsolutelitersofsolution=mmolesofsolutemillilitersofsolution
The units of molarity are therefore moles per liter of solution (mol/L), abbreviated as MM . An aqueous solution that contains 1 mol (342 g) of sucrose in enough water to give a final volume of 1.00 L has a sucrose concentration of 1.00 mol/L or 1.00 M. In chemical notation, square brackets around the name or formula of the solute represent the molar concentration of a solute. Therefore,
[sucrose]=1.00M(4.5.2)
(4.5.2)[sucrose]=1.00M
is read as “the concentration of sucrose is 1.00 molar.” The relationships between volume, molarity, and moles may be expressed as either
VLMmol/L=L(molL)=moles(4.5.3)
(4.5.3)VLMmol/L=L(molL)=moles
or
VmLMmmol/mL=mL(mmolmL)=mmoles(4.5.4)
(4.5.4)VmLMmmol/mL=mL(mmolmL)=mmoles
Figure 4.5.14.5.1 illustrates the use of Equations 4.5.34.5.3 and 4.5.44.5.4 .
alt
Figure 4.5.14.5.1 : Preparation of a Solution of Known Concentration Using a Solid Solute
Example 4.5.14.5.1 : Calculating Moles from Concentration of NaOH
Calculate the number of moles of sodium hydroxide (NaOH) in 2.50 L of 0.100 M NaOH.
Given: identity of solute and volume and molarity of solution
Asked for: amount of solute in moles
Strategy:
Use either Equation 4.5.34.5.3 or Equation 4.5.44.5.4 , depending on the units given in the problem.
Solution:
Because we are given the volume of the solution in liters and are asked for the number of moles of substance, Equation 4.5.34.5.3 is more useful:
molesNaOH=VLMmol/L=(2.50L)(0.100molL)=0.250molNaOHmolesNaOH=VLMmol/L=(2.50L)(0.100molL)=0.250molNaOH
Exercise 4.5.14.5.1 : Calculating Moles from Concentration of Alanine
Calculate the number of millimoles of alanine, a biologically important molecule, in 27.2 mL of 1.53 M alanine.
Electrons flow from the anode to the cathode in a/an _______________. Choose all that apply. Group of answer choices voltaic cell electrolytic cell galvanic cell
Answer:
galvanic cell or electrochemical cell
Explanation:
the electrolytic cell needs electric supply to make charges flow from anode to cathode while the galvanic cell doesn't.
The electrolytic cell needs electric supply to make charges flow from anode to cathode while the galvanic cell doesn't.
What is Electrolytic cell?A device that can produce electrical energy from the chemical reactions taking place inside it is called an electrochemical cell. Electrochemical cells include a common 1.5V cell seen in TV remotes and clocks as well as lithium-ion batteries found in smart phones.
Galvanic cells, often referred to as Voltaic cells, and electrolytic cells are the two forms of electrochemical cells.
"In galvanic cells, spontaneous redox reactions take place, converting chemical energy into electrical energy. As opposed to electrolytic cells, which use an external power source to drive internal chemical reactions, which transform electrical energy into chemical energy.
Therefore, The electrolytic cell needs electric supply to make charges flow from anode to cathode while the galvanic cell doesn't.
To learn more about Electrolytic cell, refer to the link:
https://brainly.com/question/4030224
#SPJ2
Which
element does the electron configuration 1s?2s?2p? represent?
O B
O C
ON
O K
Answer the following questions…
1. A solution contains 4.5x10-3 M HCl. Determine the following…
a. [H3O+]
b. [OH-]
c. pH
2. A Ca(OH)2 solution ahs a pH of 8.0. Determine the following for the solution…
a. [H3O+]
b. [OH-]
c. [Ca(OH)2]
The concentration of the hydronium ion in hydrochloric acid is 0.0045 M, and the pH of the solution is 2.34.
What is pH?pH is the potential of the hydrogen or the hydronium ions in the aqueous solution.
As the solution contains [tex]4.5 \times 10^{-3} \;\rm M\;[/tex] HCl the concentration of the hydronium ion will be the same, [tex]4.5 \times 10^{-3} \;\rm M.[/tex]
The pH of the solution is calculated as:
[tex]\begin{aligned} \rm pH &= \rm -log[H^{+}]\\\\&= - \rm log (4.5 \times 10^{-3})\\\\&= 2.34\end{aligned}[/tex]
The concentration of the hydroxide ion is calculated from pH and hydronium ion as:
[tex]\begin{aligned} \rm [H_{3}O^{+}][OH^{-}] &= 10^{-14}\\\\&= \dfrac{1 \times 10^{-14}}{4.5 \times 10^{-3}}\\\\&= 2.2 \times 10^{12}\end{aligned}[/tex]
Now, for the calcium hydroxide solution, the calculations are shown as,
[tex]\begin{aligned} \rm (H_3}\rm O^{+}) &= \rm antilog (-pH)\\\\&= \rm antilog (-8)\\\\&= 10^{-8} \;\rm M\end{aligned}[/tex]
pOH is calculated as:
[tex]\begin{aligned} \rm pOH &= 14- 8 = 6\\\\\rm [OH^{-}] &= \rm antilog (-6)\\\\&= 10^{-6} \end{aligned}[/tex]
The concentration of calcium hydroxide is calculated as:
[tex]\begin{aligned} &= \dfrac{1}{2} \times \rm [OH^{-}]\\\\&= 5 \times 10^{-4} \;\rm M\end{aligned}[/tex]
Therefore, the pH and the pOH give the concentration of the hydrogen or the hydronium ion and the hydroxide ion.
Learn more about pH and pOH here:
https://brainly.com/question/16062632
#SPJ1
Alice kicks a 0.25 kg soccer ball with 0.5 N of force. What force does the ball exert on Alice’s foot as she kicks it?
N
Answer:
0.5 N
Explanation:
The ball pushes back with the same force as Alice applies to it
Answer:
0.5 Newtons
Explanation:
did it on edge and got it right
Which of the following are functions of the nose?
I. Filters the air before it goes to the lungs.
II. Helps us keep our balance
III. Helps us smell different odors.
I and II
I and III
II and III
I, II, and III
Answer:
The answer should be I and III
Answer:
| and |||
Explanation:
why NaCl, when dissolved in water, is an electrolyte.
Answer:
Thus is because of the it ionic nature of compound the when NaCl is dissolve in the water the Na and CL ions are free to move in the solution because of this they can conduct electricity and serves as an electrolyte
Explanation:
PLEASE MARK ME BRAINLIEST IF MY ANSWER IS CORRECT PLEASE4. If I have 7.7 moles of gas at a pressure of 0.090 atm and at a temperature of 56 °C, what is the volume of the container that the
gas is in?
Answer:
[tex]2.31*10^3 L[/tex] of gas are in the container.
Explanation:
1. First, convert temperature to kelvins. Otherwise, you will get the wrong answer. T = 56 + 273.15 = 329.15 K.
2.Use the ideal gas law. [tex]PV = nRT[/tex]
3.Re-arrange for volume and use the gas contstant R = [tex]\frac{0.082(L*atm)}{K*mol}[/tex]
4.Insert values. [tex]PV = nRT = \frac{(7.7 moles)(0.082 L*atm/(K*mol))(329.15K)}{(0.090 atm)} = 2.31*10^3 L.[/tex]
Will give brainiest
Calculate the concentration of a solution of nitric acid in which 2.6g is dissolved into 2.0 L
How much oxygen does an average 50 year-old tree produce?.
Answer:
A mature leafy tree produces as much oxygen in a season as 10 people inhale in a year." "A 100-foot tree, 18 inches diameter at its base, produces 6,000 pounds of oxygen." "On average, one tree produces nearly 260 pounds of oxygen each year. Two mature trees can provide enough oxygen for a family of four.
Explanation:
hope this helps
Which gas is produced when Mg(s) is added to HCl(aq)?
A.
O2
B.
H2
C.
Cl2
D.
CO2
Answer:
B h2
Explanation:
Answer:H2
Explanation:
Which of the following is NOT a function of the skeletal system?
A. Exchanges oxygen and carbon dioxide
B. Produce red blood cells
C. Protects the organs
D. Stores calcium and phosphorus
(This is a science question btw)
Answer:
D. Stores calcium and phosphorus
Explanation:
Correct me if I'm wrong
The mass of an unidentified metal sphere is 133 grams. Students determine the
volume of the metal sphere by placing it in a graduated cylinder filled with 25
milliliters of water. The volume of the water rises to 40 milliliters when the metal
sphere is placed into the graduated cylinder. The students calculate the density
of the metal sphere in order to determine the identity of the metal using the
chart below.
What is the identity of the metal?
Aluminum
Tin
Iron
Cobalt
Given the data from the question, the identity of the unknown metal having a of mass 133 g is Cobalt
What is density?The density of a substance is simply defined as the mass of the subtance per unit volume of the substance. Mathematically, it can be expressed as
Density = mass / volume
How to determine the density Mass = 133 gVolume of water = 25 mL Volume of water + metal = 40 mL Vol of metal = 40 – 25 = 15 mL Density =?Density = mass / volume
Density = 133 / 15
Density = 8.86 g/mL
Comparing the density of the unknown metal (i.e 8.86 g/mL) with those given in the chart in the question above, we can conclude that the unknown metal is Cobalt
Learn more about density:
https://brainly.com/question/952755
Fill in the blank.
_______ is defined as the energy of motion.
_______ is proportional to the average kinetic energy of the sample of matter.
Temperature indicates the _______ of heat flow.
Heat flows only from _______ objects to _______ objects.
The _______ scale is the absolute temperature scale where zero degrees is defined as an absolute zero.
_______ is the lowest possible temperature where no heat energy would remain in the substance and molecules and atoms would stop moving.
_______ is the net movement of particles from regions of high concentration to regions of low concentration.
The transfer of heat from a hot to a cold body would stop when _______ is reached.
_______ is the quantity of heat that a body of matter absorbs or releases when it experiences a temperature change of 1 Kelvin.
Answer:
Kinetic energy, Kelvin temperature, direction, warmer, cooler, Kelvin, Absolute zero
Explanation:
THe answers are in order and when there is a comma move to the next ______
2. Which of the following best describes temperature? *
O Number of molecules
Motion of molecules
O Size of molecules
O Type of molecules
Answer:
motion of molecules because we gonna see which one is in a solid state and what's so ever
Giving brainliest, please HELP!
Answer:
exothermic
Explanation:
Diagrams shows reactants.....add a little energy to get the reaction going
then energy is released and the final product has less energy ....so energy was released (heat) so this would be an exothermic reaction
Write the steps that describe the process of water changing from a solid to a liquid, and from a liquid to a gas. Helpp plsss
What are 5 pros of coal of energy?
Answer:
What are the pros of coal energy? ans :
Huge Global Reserves.
Not an Intermittent Energy Source.
Reliable Fuel.
Inexpensive Energy Source.
Minimal Wastes, Consumable Byproducts
Smokeless Alternatives
Compatible With Other Energy Sources.
3. Briefly discuss the results of the TLC. Was there evidence of unreacted p-nitrobenzaldehyde in either product
TLC means Thin Layer Chromatography. It is a method that can best be described as "Affinity-Based" used in the separation of compounds that are in a mixture.
What is unreacted p-nitrobenzaldehyde?Unreacted p-nitrobenzaldehyde is simply an organic aromatic compound that contains a nitro group para-substituted to an aldehyde. in this case, if it is unreacted, that means it is the same as before the chemical reation.
Note that the question is missing key information hence the general answer.
Learn more about TCL at:
https://brainly.com/question/10296715
Describe how a metal less reactive than carbon can be reduced from its ore
Answer:
If a metal is less reactive than carbon, it can be extracted from its oxide by heating with carbon. The carbon displaces the metal from the compound, and removes the oxygen from the oxide. This leaves the metal.
explain how electronegativity plays a role in the strength of intermolecular forces
Answer:
Intermolecular Forces: Review. Electronegativity is a measure of an atom's ability to attract the shared electrons of a covalent bond to itself. If atoms bonded together have the same electronegativity, the shared electrons will be equally shared.
Explanation:
hope this helped
Mercury-203 undergoes beta minus decay. 203 80 hg → 203 81 tl ? the subatomic particle produced is a(n) . 203 80 hg → 203 81 tl 0 -1 e is this the correct balanced equation? .
The correct balanced equation of a beta decay undergone by Mercury-203 is as follows:
203 80 Hg → 203 81 + 0 -1 e
What is beta decay?Beta decay in radioactivity refers to the release of a beta particle by a radioactive element.
Beta particle is characterized by the possession of mass number 0 and atomic number -1.
This means that if Mercury-203 undergoes beta decay, the atomic number of the resulting isotope will be +1 as follows:
203 80 Hg → 203 81 Tl + 0 -1 e
Learn more about beta radiation at: https://brainly.com/question/1580990
#SPJ4
21) What is the percent by mass of bromine in the compound MgBr₂?
A) 13.2%
B) 43.4%
C) 56.6%
D) 86.8%
Answer:
D 86.8%
Explanation:
Two bromines mole wt = 2 * 79.9 = 159.8 gm (from periodic table)
Mg = 24.3 gm
159.8 / ( 159.8 + 24.3) = .868 = 86.8 %
Can someone please help me? i will give brainlist
Answer:
B. Design homes that can be built on stilts where flooding is likely to occur.
C. Replace power lines that have been damaged by severe weather.
Explanation:
[tex]Hope[/tex] [tex]this[/tex] [tex]helps![/tex] [tex]:)[/tex]
Which statement describes abiotic factors in an environment? chickens run around a farm. soil retains water and nutrients. bacteria use energy to reproduce. plants compete for sunlight in an ecosystem.
Answer:
soil retains water and nutrients
Explanation:
abiotic factors
water
soil
pH
Answer: B
Explanation:
what is biological function?
Answer:
Biological Functions: processes and structures by which organisms adjust to short-term or long-term changes in their environment
Radium decays to form radon. 226 88 ra → 222 86 rn 4 2 he this type of nuclear decay is called .
Answer:
alpha decay
Explanation:
Nuclear reactions accompany nuclear decay and this type of decay is alpha decay.
What are nuclear reactions?There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.
In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.
In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.
Learn more about nuclear reactions,here:
https://brainly.com/question/12786977
#SPJ7
Giving BRAINLIEST, please HELP!
Answer:
measure the final temperature of water