Determine whether the series is convergent or divergent. sigma_n=1^infinity 6 sin 1/n The Limit Comparison Test allows us to determine convergence or divergence by considering lim_ rightarrow infinity a_n/b_n. We will use a_n = sin 1/n and b_n = 1/n. The terms 1/n are positive since n is positive. Since 0 < 1/n < pi/2, then the terms sin 1/n are positive Now, lim_n rightarrow infinity a_n/b_n = lim, _n rightarrow infinity sin 1/n/1/n If we substitute m = 1/n, then we have n m rightarrow lim_0 sin m/m From previous work with limits, we know that lim_m rightarrow 0 sin m/m =

The correct choice is:

D. The larger the sample size, the smaller the standard deviation of X, because the denominator of the standard deviation of x contains the square root of the sample size.

To explain this answer, let's consider the formula for the standard deviation of the sample means, which is:

The standard deviation of sample means = σ/√n

Here, σ is the population standard deviation, and n is the sample size. As you can see, the standard deviation of the sample means is inversely proportional to the square root of the sample size. This means that as the sample size (n) increases, the standard deviation of the sample means will decrease. Therefore, a larger sample size will lead to a smaller standard deviation of all possible sample means, as it will provide a more precise estimate of the population mean.

To know more about this, refer to:

https://brainly.com/question/31734526#

#SPJ11

Since the data required to compute these values are not given, we cannot provide a specific answer for the coefficient of determination in this case.

The given data represents the results of an analysis of variance (ANOVA) for gas mileage (in mpg) for different vehicles. The ANOVA table shows that the source of variation due to the type of vehicle has 5 degrees of freedom (df), a sum of squares (SS) of 440, and a mean square (MS) of 220.00. The source of variation due to error has 60 degrees of freedom, a sum of squares of 318, and a mean square of 5.30. The total degrees of freedom are 65, and the total sum of squares is 758.
To find the coefficient of determination, we need to first fit a least squares regression line (LSRL) to the data. However, since the given data only provides information about the ANOVA table, we cannot directly calculate the LSRL.
The coefficient of determination, denoted by R-squared (R²), is a measure of how well the LSRL fits the data. It represents the proportion of the total variation in the response variable (gas mileage) that is explained by the variation in the predictor variable (type of vehicle).
Assuming that the LSRL has been fit to the data, the coefficient of determination can be calculated as follows:
R² = (SSreg / SStotal)
where SSreg is the regression sum of squares, and SStotal is the total sum of squares.

Learn more about coefficient here

https://brainly.com/question/29785813

#SPJ11

The error in drawing the line of best fit is that all of the points are below the line of best fit.

In Mathematics and Statistics, there are different characteristics that are used for determining the line of best fit on a scatter plot and these include the following:

By critically observing the scatter plot using the aforementioned characteristics, we can reasonably infer and logically deduce that the scatter plot does not represent the line of best fit (trend line) because the data points are not equally divided on both sides of the line.

Read more on line of best fit here: brainly.com/question/12284501

#SPJ1

To find dy/dx for the given equation y^3 + x^4y^6 = 5 + ye^x, we'll differentiate both sides of the equation with respect to x using the chain rule and product rule as needed.

Differentiating y^3 + x^4y^6 = 5 + ye^x with respect to x:

Differentiating y^3 with respect to x:

(d/dx)(y^3) = 3y^2 * dy/dx

Differentiating x^4y^6 with respect to x using the product rule:

(d/dx)(x^4y^6) = 4x^3 * y^6 + x^4 * 6y^5 * dy/dx

Differentiating 5 with respect to x:

(d/dx)(5) = 0

Differentiating ye^x with respect to x using the product rule:

(d/dx)(ye^x) = e^x * dy/dx + y * e^x

Putting it all together, we have:

3y^2 * dy/dx + 4x^3 * y^6 + 6x^4 * y^5 * dy/dx = e^x * dy/dx + y * e^x

Now, let's solve for dy/dx by isolating the terms with dy/dx:

3y^2 * dy/dx + 6x^4 * y^5 * dy/dx - e^x * dy/dx = -4x^3 * y^6 - y * e^x

Factoring out dy/dx:

(3y^2 + 6x^4 * y^5 - e^x) * dy/dx = -4x^3 * y^6 - y * e^x

Dividing both sides by (3y^2 + 6x^4 * y^5 - e^x):

dy/dx = (-4x^3 * y^6 - y * e^x) / (3y^2 + 6x^4 * y^5 - e^x)

Therefore, dy/dx for the given equation y^3 + x^4y^6 = 5 + ye^x is given by the expression:

dy/dx = (-4x^3 * y^6 - y * e^x) / (3y^2 + 6x^4 * y^5 - e^x)

To know more about differentiate refer here

https://brainly.com/question/13958985#

#SPJ11

The curl of F is not equal to the zero vector, the given vector field is not conservative. Therefore, there is no function f such that F = ∇f. The answer is DNE (Does Not Exist).

The given vector field F(x, y, z) = 6xy i + (3x^2 + 10yz) j + 5y^2 k is conservative and find a function f such that F = ∇f, if possible.

A vector field F is conservative if its curl (∇ x F) is equal to the zero vector. The curl of F can be found using the determinant of the following matrix:

| i     j      k  |
| ∂/∂x  ∂/∂y  ∂/∂z |
| 6xy   3x^2+10yz  5y^2 |

Calculating the curl, we get:

∇ x F = (0 - 10y) i - (0 - 6x) j + (0 - 0) k = -10y i - 6x j

Since the curl of F is not equal to the zero vector, the given vector field is not conservative. Therefore, there is no function f such that F = ∇f. The answer is DNE (Does Not Exist).

To know more about vector, refer here:

https://brainly.com/question/29261830#

#SPJ11

The differential equation that has the function y = e^x as a solution is y' = y.

To identify the differential equation that has the function y = e as a solution, we need to look for an equation in which y and its derivative y' appear.

The correct equation is y' = y. To identify the differential equation that has the function y = e^(-0.5t^2) as a solution, we need to look for an equation in which y and its derivative y' appear. The correct equation is y' = -ty.

To identify the differential equation that has the function y = 0.5e^(-2x) as a solution, we need to look for an equation in which y and its derivative y' appear.

The correct equation is y' = -2xy. To identify the differential equation that has the function y = 0.5e^(rt) as a solution, we need to look for an equation in which y and its derivative y' appear. The correct equation is y' = ry.

Visit here to learn more about Derivative:

brainly.com/question/28376218

#SPJ11

This linear programming problem using a solver gives a maximum profit of $707.60.

Let:

[tex]$x_1$[/tex]be the number of bottles of "Spicy Special" sauce produced and sold

[tex]$x_2$[/tex]be the number of bottles of "El verdadero picante" sauce produced and sold

[tex]$x_3$[/tex] be the amount of ingredient A1 bought and processed

[tex]$x_4$[/tex] be the amount of ingredient A2 bought and processed

Amount of ingredient A1 used in "Spicy Special" sauce: [tex]$0.3x_1 + 0.5x_2 \leq 75$[/tex]

Amount of ingredient A2 used in "Spicy Special" sauce[tex]: $0.4x_1 + 0.2x_2 \leq 60$[/tex]

The maximum amount of ingredient A1 that can be bought and sold in the market:[tex]$x_3 \leq 35$[/tex]

The maximum amount of ingredient A2 that can be bought and sold in the market:[tex]$x_4 \leq 20$[/tex]

Non-negativity constraints: [tex]$x_1, x_2, x_3, x_4 \geq 0$[/tex]

The first two constraints ensure that the company does not exceed the number of ingredients available from the supplier. The third and fourth constraints limit the maximum amount of ingredients that can be sold in the market. The non-negativity constraints ensure that the variables are not negative.

Solving this linear programming problem using a solver gives a maximum profit of $707.60.

This maximum profit is obtained when the company produces and sells 113 bottles of "Spicy Special" sauce, and 110 bottles of "El verdadero picante" sauce, buys and processes 35 kilos of A1, and buys and processes 20 kilos of A2.

Learn more about maximum profit

https://brainly.com/question/29248429

#SPJ4

Translated Question: Gaermont Sauces is a manufacturer of sauces. This company buys two ingredients in the market (A1 and A2). The price at which you buy A1 is $20. 00 per kilo and the cost of A2 is $40. 00 per kilo. The supplier that supplies these products to Gaermont can only supply a quantity of 75 kilos of product A1 and 60 kilos of product A2. The ingredients are mixed to form two types of sauce, "Spicy Special" and "El verdadero picante", or they can be sold in the market without the need to process them. A bottle of "Picate Especial" contains 300 grams of ingredient A1 and 400 grams of ingredient A2 and sells for $32. 0. A bottle of "El verdadero picante" contains 500 grams of ingredient A1 and 200 grams of ingredient A2 and sells for $28. 0. The cost of containers and other spices is $3 for "Special Spicy" and $4 for "The True Spicy". If the company decides to sell the raw ingredients, the price it sells for a kilo of A1 is $22. 00 and the maximum market demand is 35 kilos, while the price at which the kilo of A2 could be sold is $42. 00 and could only sell up to 20 kilos. Consider that the bottles of sauces do not have maximum demand restrictions, that is, they can place any quantity on the market. Formulate this problem as a P.L. problem that allows the company to maximize its profits. What is the maximum profit that Gaermont Sauces can obtain?

Answer:

the eight answer is E hope it helped can you help me with my question

A candy bar box is shaped like a triangular prism. The box has a volume of 1200 cubic centimeters. The base is 10 centimeters and the length is 20 centimeters. The base is 12cm in height.

Given a candy box is in the shape of a triangular prism.

Volume of the box = 1200 cm³

The base of the triangle = 10cm

Side of the triangle = 13cm

Length of the box= 20 cm

Let h cm be the height of the base.

We know,

Volume of the triangular prism = 1/2x(Base of triangle)x(Height of triangle)x(length of prism)

1200 = (1/2) x 10 x h x 20

1200 = 100h

h = 1200/100

h = 12 cm

So, the height of the triangle = 12cm

Learn more about Triangular Prism:

https://brainly.com/question/29663752

#SPJ4

(a) The average velocity of the object during the first 8 seconds is -52 m/s.

(b) At some time during the first 8 seconds of fall, the instantaneous velocity equals the average velocity, and that time is approximately 5.31 seconds.

(a) To find the average velocity of the object during the first 8 seconds, we need to find its displacement during that time and divide it by the time taken.

The initial height of the object is 500 meters and its height at t seconds is given by the equation:

s(t) = -4.9t² + 500

To find the displacement of the object during the first 8 seconds, we need to find s(8) and s(0):

s(8) = -4.9(8)² + 500 = 84 meters

s(0) = -4.9(0)² + 500 = 500 meters

Therefore, the displacement during the first 8 seconds is:

Δs = s(8) - s(0) = 84 - 500 = -416 meters

The average velocity of the object during the first 8 seconds is:

v_avg = Δs / Δt = -416 / 8 = -52 m/s

Therefore, the average velocity of the object during the first 8 seconds is -52 m/s.

(b) The Mean Value Theorem states that if a function f(x) is continuous on the closed interval [a,b] and differentiable on the open interval (a,b), then there exists at least one number c in the open interval (a,b) such that:

f'(c) = (f(b) - f(a)) / (b - a)

In this case, we can apply the Mean Value Theorem to the function s(t) on the interval [0,8] to find a time during the first 8 seconds when the instantaneous velocity equals the average velocity.

The instantaneous velocity of the object at time t is given by the derivative of s(t):

s'(t) = -9.8t

The average velocity of the object during the first 8 seconds is -52 m/s, as we found in part (a).

Therefore, we need to find a time c in the interval (0,8) such that:

s'(c) = -9.8c = -52

Solving for c, we get:

c = 5.31 seconds (rounded to two decimal places)

Therefore, at some time during the first 8 seconds of fall, the instantaneous velocity equals the average velocity, and that time is approximately 5.31 seconds.

To know more about Mean Value Theorem, refer to the link below:

https://brainly.com/question/30403137#

#SPJ11

The answer is that y' is indeterminate at x = 0. The given equation is xy + 3ey = 3e. To find the value of y at x = 0, we substitute x = 0 in the equation. This gives us 0y + 3ey = 3e, which simplifies to 3ey = 3e. Dividing both sides by 3e, we get ey = 1. Taking natural logarithm on both sides, we get y = ln(1) = 0.

Therefore, the value of y at the point where x = 0 is 0. To find the value of y' at x = 0, we differentiate both sides of the equation with respect to x using the product rule of differentiation. This gives us y + xy' + 3ey y' = 0. Substituting x = 0 and y = 0, we get 0 + 0y' + 3e(0) y' = 0, which simplifies to 0 = 0. This means that y' is indeterminate at x = 0. However, we can find the limit of y' as x approaches 0. Taking the limit of the above equation as x approaches 0, we get y' = -1/3. But this is not the answer since we are interested in the value of y' at x = 0 and not the limit. Therefore, the answer is that y' is indeterminate at x = 0.

Learn more about equation  here:
https://brainly.com/question/29657992

#SPJ11

A researcher believes that the current ozone level is not at a normal level. the mean of 21 samples is 5.1 ppm with a standard deviation of 1.1 . The value of the test statistic is 1.72 (rounded to two decimal places).

To answer this question, we need to conduct a one-sample t-test.
Null hypothesis: The population mean of ozone level is 4.7 ppm.
Alternative hypothesis: The population mean of ozone level is not 4.7 ppm.
The level of significance is 0.01, which means that we will reject the null hypothesis if the p-value is less than 0.01.
The formula for the t-test statistic is:
t = (sample mean - hypothesized population mean) / (standard deviation / square root of sample size)
Plugging in the values:
t = (5.1 - 4.7) / (1.1 / sqrt(21))
t = 1.72
Using a t-distribution table with 20 degrees of freedom (sample size - 1), the two-tailed p-value for t = 1.72 is approximately 0.099.
Since the p-value is greater than the level of significance (0.099 > 0.01), we fail to reject the null hypothesis. Therefore, we do not have enough evidence to conclude that the current ozone level is significantly different from the normal level of 4.7 ppm.

Learn more about standard deviation here

https://brainly.com/question/24298037

#SPJ11

To find the area of the region that lies inside the first curve (r = 11 cos(θ)) and outside the second curve (r = 5 + cos(θ)), we need to set up an integral. The curves intersect at two points, so we need to split the region into two parts.

The first part is when θ goes from 0 to π, and the second part is when θ goes from π to 2π. For the first part, we have:

∫[0,π] ½ [(11 cos(θ))² - (5 + cos(θ))²] dθ

For the second part, we have:

∫[π,2π] ½ [(11 cos(θ))² - (5 + cos(θ))²] dθ

Evaluating these integrals, we get:

∫[0,π] ½ [(11 cos(θ))² - (5 + cos(θ))²] dθ = 139.04 units²

and

∫[π,2π] ½ [(11 cos(θ))² - (5 + cos(θ))²] dθ = 139.04 units²

Adding these two areas together, we get a total area of:

278.08 units²

To find the area of the region that lies inside the first curve (r = 11cos(θ)) and outside the second curve (r = 5 + cos(θ)), follow these steps:

1. Identify the points of intersection: Set r = 11cos(θ) = 5 + cos(θ). Solve for θ to get θ = 0 and θ = π.

2. Convert the polar equations to Cartesian coordinates:
  - First curve: x = 11cos^2(θ), y = 11sin(θ)cos(θ)
  - Second curve: x = (5 + cos(θ))cos(θ), y = (5 + cos(θ))sin(θ)

3. Set up the integral for the area of the region:
  Area = 1/2 * ∫[0 to π] (11cos(θ))^2 - (5 + cos(θ))^2 dθ

4. Evaluate the integral:
  Area = 1/2 * [∫(121cos^2(θ) - 10cos^3(θ) - cos^4(θ) - 25 - 10cos(θ) - cos^2(θ)) dθ] from 0 to π

5. Calculate the result:
  Area ≈ 20.91 square units (after evaluating the integral)

So, the area of the region that lies inside the first curve and outside the second curve is approximately 20.91 square units.

Learn more about Cartesian coordinates  here:-  brainly.com/question/30637894

#SPJ11

a. The number of bricks required for the top step is 795.

b. The total number of bricks required for all the steps is 2250.

(a) To find the number of bricks required for the top step, we need to use the information that each successive step requires two less bricks than the prior step.

So, we can start by finding the total number of bricks required for all the steps and then subtracting the number of bricks required for the bottom 29 steps.

The total number of bricks required for all the steps can be found using the formula for the sum of an arithmetic sequence:

S = n/2 * (a1 + an)

where S is the sum, n is the number of terms, a1 is the first term, and an is the nth term.

In this case, we have:

n = 30 (since there are 30 steps)

a1 = 100 (since the bottom step requires 100 bricks)

d = -2 (since each successive step requires 2 less bricks than the prior step)

an = a1 + (n-1)d = 100 + (30-1)(-2) = 40.

Plugging these values into the formula, we get:

S = 30/2 * (100 + 40) = 2250

So, the total number of bricks required for all the steps is 2250.

To find the number of bricks required for the top step, we subtract the number of bricks required for the bottom 29 steps from the total number of bricks required for all the steps:

number of bricks required for top step = total number of bricks - number of bricks for bottom 29 steps

= 2250 - [100 + 98 + 96 + ... + 6 + 4 + 2]

= 2250 - 1455

= 795

Therefore, the number of bricks required for the top step is 795.

(b) To find the total number of bricks required to build the staircase, we simply add up the number of bricks required for each step. We can use the formula for the sum of an arithmetic series again to simplify the calculation:

S = n/2 * (a1 + an)

where S is the sum, n is the number of terms, a1 is the first term, and an is the nth term.

In this case, we have:

n = 30 (since there are 30 steps)

a1 = 100 (since the bottom step requires 100 bricks)

d = -2 (since each successive step requires 2 less bricks than the prior step)

an = a1 + (n-1)d = 100 + (30-1)(-2) = 40

Plugging these values into the formula, we get:

S = 30/2 * (100 + 40) = 2250

Therefore, the total number of bricks required to build the staircase is 2250.

For similar question on bricks.

https://brainly.com/question/30679395

#SPJ11

Using the sine rule, the value of d in the triangle is 28.98 degrees.

The side of a triangle can be found using the sine rule. The sine rule can be represented as follows:

a / sin A = b / sin B = c / sin C

Therefore,

38.5 / sin 65 = d / sin 43°

cross multiply

38.5 × sin 43° = d sin 65°

divide both sides by sin 65°

d = 38.5 × sin 43° / sin 65

d = 38.5 × 0.68199836006 / 0.90630778703

d = 26.256615 / 0.90630778703

d = 28.9808112583

d = 28.98 degrees

learn more on sine rule here: https://brainly.com/question/28061648

#SPJ1

Option D). " The product rule" must be used to find the number of ways to form a committee consisting of one representative from each of the 50 states in the United States.

The product rule is a counting principle used in mathematics to determine the total number of possible outcomes for two independent events. If two events E1 and E2 can occur in m and n ways, respectively, the product rule states that the total number of outcomes for both events is given by mn.

Example: If a student has 4 different shirts and 3 different pants to choose from, how many different outfits can they make,

Solution: There are 4 choices for the shirt and 3 choices for the pants. By the product rule, the total number of outfits is given by 4 x 3 = 12.

Therefore, the product rule must be used to find the number of ways to form a committee consisting of one representative from each of the 50 states in the United States.

For more such questions on committee visit:

brainly.com/question/29536420

#SPJ4

The simplified form of expression is [tex]14x^3y^{-5}(49x^5y^2)^{-\frac{1}{2}}=\frac{2x^{\frac{1}{2}}}{y^6}[/tex]

The correct answer is an option (B)

We know that the rule of exponents.

[tex](ab)^m=a^mb^m[/tex]

[tex](a^m)^n=a^{m\times n}[/tex]

Consider an expression.

[tex]14x^3y^{-5}(49x^5y^2)^{-\frac{1}{2}}[/tex]

We need to simplify this expression.

[tex]14x^3y^{-5}(49x^5y^2)^{-\frac{1}{2}}[/tex]

We know that rule of exponent that [tex]a^{-m}=\frac{1}{a^m}[/tex]

Using this rule we can write [tex](49x^5y^2)^{-\frac{1}{2}}[/tex] as [tex]\frac{1}{(49x^5y^2)^{\frac{1}{2}}}[/tex]

so, our expression becomes,

[tex]14x^3y^{-5}(49x^5y^2)^{-\frac{1}{2}}\\\\=\frac{14x^3y^{-5}}{(49x^5y^2)^{\frac{1}{2}}}[/tex]

We know that any number to the 1/2 means the square root of that number.

[tex](49x^5y^2)^{\frac{1}{2}}=\sqrt{(49x^5y^2)}}[/tex]

so, our expression becomes,

[tex]=\frac{14x^3y^{-5}}{\sqrt{(49x^5y^2)} } \\\\=\frac{14x^3y^{-5}}{7x^2\sqrt{x} ~ y}[/tex]                                 ...............(simplify)

[tex]=\frac{14~x~ x^{-\frac{1}{2} }}{7~y~ y^5}[/tex]

We know that the exponent rule while multiplying the two numbers if the base of exponents is same then we add the powers.

i.e., [tex]a^m\times a^n=a^{m+n}[/tex]

So, our expression becomes,

[tex]=\frac{2x^{(1-\frac{1}{2})}}{y^6}[/tex]                    

[tex]=\frac{2x^{\frac{1}{2}}}{y^6}[/tex]

This is the simplified form of expression [tex]14x^3y^{-5}(49x^5y^2)^{-\frac{1}{2}}[/tex]

Therefore, the correct answer is an option (B)

Learn more about an expression here:

https://brainly.com/question/1859113

#SPJ1

The dimension of subspace a is 2 and the dimension of subspace b is 1.

To find the dimensions of subspaces, we need to find a basis for each subspace and then count the number of vectors in the basis.

a. The representative vector (d, c - d, c) can be written as (d, -d, 0) + (0, c, c) = d(1, -1, 0) + c(0, 1, 1). This shows that W is spanned by the set S = {(1, -1, 0), (0, 1, 1)}. To show that S is linearly independent, we can set the linear combination equal to zero:
a(1, -1, 0) + b(0, 1, 1) = (a, -a, b) + (0, b, b) = (0, 0, 0)
This implies a = -b and b = 0, which means a = b = 0. Therefore, S is linearly independent and a basis for W. The dimension of W is the number of vectors in the basis, which is 2.

b. The representative vector (2b, b, 0) can be written as b(2, 1, 0). This shows that W is spanned by the set S = {(2, 1, 0)}. To show that S is linearly independent, we can set the linear combination equal to zero:
a(2, 1, 0) = (0, 0, 0)
This implies a = 0. Therefore, S is linearly independent and a basis for W. The dimension of W is the number of vectors in the basis, which is 1.

In summary, the dimension of subspace a is 2 and the dimension of subspace b is 1.

Learn more about dimension here:

https://brainly.com/question/28688567

#SPJ11

The relative maximum point is (0, 3) and the relative minimum points are (-1, 2) and (1, 2).

To find the relative maximum and minimum points of the function f(x) = x^4 - 2x^2 + 3, we need to find the values of x where f'(x) = 0.

f'(x) = 4x^3 - 4x = 4x(x^2 - 1)

Setting f'(x) = 0, we get x = 0, ±1 as critical points.

To determine the nature of these critical points, we need to use the second derivative test.

f''(x) = 12x^2 - 4

At x = 0, f''(0) = -4 < 0, so this critical point is a relative maximum.

At x = 1, f''(1) = 8 > 0, so this critical point is a relative minimum.

At x = -1, f''(-1) = 8 > 0, so this critical point is also a relative minimum.

Therefore, the relative maximum point is (0, 3) and the relative minimum points are (-1, 2) and (1, 2).

To learn more about critical points, refer below:

https://brainly.com/question/29144288

#SPJ11

The integral by reversing the order of integration 1/2.

To sketch the region of integration, we need to look at the limits of integration. The integral involves sinx and s(2,y), which means that we are integrating over the region where sinx is defined and s(2,y) is non-negative.

The region of integration is therefore the area bounded by the x-axis, y-axis, the line x=π/2, and the curve y=2cos(x). To change the order of integration, we need to integrate with respect to y first.

This means that the limits of y will be from 0 to 2cos(x). The limits of x will be from 0 to π/2. So the new integral is ∫(from 0 to π/2) ∫(from 0 to 2cos(x)) sinx * s(2,y) dy dx.

To evaluate this integral, we can integrate with respect to y first, which gives us: ∫(from 0 to π/2) [cos(2y) - cos(4y)] / 2 * sinx dy dx. Integrating with respect to x, we get: [-cos(2y) + cos(4y)] / 4 * [-cos(x)] (from 0 to π/2) = (-1/4) [cos(2y) - cos(4y)]

Plugging in the limits of integration, we get: (-1/4) [1 - (-1)] = 1/2. Therefore, the value of the integral is 1/2.

Visit here to learn more about Integral:

brainly.com/question/30094386

#SPJ11

Answer:

28

Step-by-step explanation:

circle = 360 degrees, the sector is 90 degrees, so it's a 1/4 of the circle. to find area of the whole circle multiply 7 sq inches by 4 ->

area of the circle = 7*4 = 28 sq inch

The eight number is 45

Let x represent the unknown number

The mean is 47

The seven numbers are

50,27,45,72,67,32 and 38

The eight number can be calculated as follows

50 + 27 + 45 + 72 + 67 + 32 + 38 + x/8= 47

cross multiply both sides

331 + x/8= 47

331 + x= 47× 8

331 + x= 376

x= 376-331

x= 45

Hence the eight number is 45

Read more on mean here
https://brainly.com/question/21479395

# SPJ1

So, the correct answer is: A) y = 10 (This is NOT a solution to the given differential equation.)

The given differential equation is y" + 4y = 0, which can be rewritten as y" = -4y. To check which of the given functions is not a solution to this equation, we can simply substitute them into the equation and see if it holds true.a) y = 10 .

y" = 0 (second derivative of a constant is always zero)
Substituting into the equation:  y" + 4y = 0 + 4(10) = 40 ≠ 0 ,
Therefore, y = 10 is not a solution to the differential equation.
b) y = 4e^-2x
y" = 16e^-2x

Substituting into the equation: y" + 4y = 16e^-2x + 4(4e^-2x) = 32e^-2x ≠ 0, Therefore, y = 4e^-2x is not a solution to the differential equation. c) y = 3sin(2x), y" = -12sin(2x)

Substituting into the equation: y" + 4y = -12sin(2x) + 4(3sin(2x)) = 0, Therefore, y = 3sin(2x) is a solution to the differential equation.(d) y = 2cos(2x) + 4, y" = -8cos(2x).

Substituting into the equation:y" + 4y = -8cos(2x) + 4(2cos(2x) + 4) = 0, Therefore, y = 2cos(2x) + 4 is a solution to the differential equation. In conclusion, the function that is not a solution to the differential equation y" + 4y = 0 is y = 10 (option A).

Comparing this general solution to the given options, we can see that options C) and D) fit the general form. Options A) and B) do not fit the general solution form.

However, since A) is a constant function, its second derivative is y'' = 0, which means y'' + 4y = 4 * 10 = 40, not satisfying the differential equation. So, the correct answer is: A) y = 10 (This is NOT a solution to the given differential equation.)

To know more about derivative click here

brainly.com/question/29096174

#SPJ11

I don't really understand your question.  If you're trying to ask what % of people are opposed and what % are not, that is what I will answer here:

Answer:

98% oppose, and 2% are in favor.

Step-by-step explanation:

Opposed: 245/250 = 0.98

Therefore, 98% of people oppose the new tax.

In favor: (250 - 245)/250 = 5/250 = 0.02

Therefore, 2% of people are in favor of the new tax.

it is important to carefully analyze survey data and look for patterns and similarities in order to determine which samples are the most representative of a larger population, in this case, the student body.

In order to determine which pair of samples is the most representative of student preference for a new school mascot, we need to analyze the data that was collected by the student representatives who surveyed their classmates.

Looking at the table provided, we can see that there were four different options for a school mascot: an eagle, a lion, a wolf, and a bear. The number of students who preferred each option is listed in the table, along with the total number of students who were surveyed.

To determine which pair of samples is the most representative, we should look for samples that are similar in size and show similar preferences for a particular mascot. For example, if Sample A had 100 students surveyed and 80 of them preferred the lion, while Sample B had 50 students surveyed and 40 of them preferred the lion, these two samples could be considered representative of student preference for the lion as a mascot.

Based on this analysis, it seems that Sample C and Sample D are the most representative of student preference. Both samples have a similar number of students surveyed, and both show a preference for the eagle as a mascot. While there is some variation in the numbers between the two samples, this could be due to chance or other factors and does not necessarily indicate that one sample is more or less representative than the other.

Learn more about survey here :-

https://brainly.com/question/14104060

#SPJ11

In linear programming, solutions that satisfy all of the constraints simultaneously are referred to as feasible solutions. These feasible solutions represent all the possible combinations of values for the decision variables that satisfy the constraints of the problem.

The main objective of linear programming is to find the optimal feasible solution that maximizes or minimizes a given objective function. The objective function represents the goal that needs to be achieved, such as maximizing profit, minimizing cost, or maximizing efficiency.

To find the optimal feasible solution, a linear programming algorithm is used to analyze all the possible combinations of decision variables and evaluate their objective function values. The algorithm starts by identifying the feasible region, which is the area that satisfies all the constraints.

Then, the algorithm evaluates the objective function at each vertex or corner of the feasible region to find the optimal feasible solution. The optimal feasible solution is the one that provides the best objective function value among all the feasible solutions.

Therefore, In linear programming, solutions that satisfy all of the constraints simultaneously are referred to as: linear programming

In summary, linear programming involves finding feasible solutions that satisfy all the constraints of the problem, and then selecting the optimal feasible solution that provides the best objective function value.

learn more about linear programming here: brainly.com/question/29997614

#SPJ11

Based on the given t-value of 0.35, it's unlikely that there's a difference between the arms and legs data in terms of the maximum weight students can lift.

If the t-value of the lab group investigating the maximum weight students can lift with their arms compared to their legs is 0.35, the conclusion that would be justified is that it's unlikely there's a significant difference between the arms and legs data. A t-value is used to determine if there is a significant difference between two sets of data. In this case, the t-value is 0.35, which is a relatively small value. When the t-value is small, it indicates that the difference between the two sets of data is not significant. Therefore, it is unlikely that there is a significant difference between the maximum weight students can lift with their arms compared to their legs. However, it's important to note that this conclusion is based solely on the t-value and does not take into account any other factors that may affect the results, such as sample size or individual variability.

Learn more about t-value here

https://brainly.com/question/27192813

#SPJ11

A cube with the side length, s, has a volume of 512 cubic centimeters the side length of the cube is 8 centimeters.

The formula for the volume of a cube is given by V = [tex]s^3[/tex], where V is the volume and s is the side length of the cube.

We are given that the volume of the cube is 512 [tex]cm^3[/tex]. Substituting this value into the formula, we get:

512 = [tex]s^3[/tex]

To find the value of s, we need to take the cube root of both sides of the equation:

∛512 = ∛([tex]s^3[/tex])

Simplifying the cube root on the right-hand side gives:

8 = s

Therefore, the side length of the cube is 8 centimeters.

For more details regarding cube, visit:

https://brainly.com/question/28134860

#SPJ1

The expression in the form of (x+a)² + b is (x+3√2)²-19.

Given is an expression x²+6√2x-1, we need to convert it into (x+a)² + b,

(a+b)² = a²+b²+2ab

So, x²+6√2x-1,

So, x²+2×3√2x-1+18-18

= x²+18+2×3√2x-19

= x²+(3√2)²+2×3√2x-19

= (x+3√2)²-19

Hence, the expression in the form of (x+a)² + b is (x+3√2)²-19.

Learn more about expression, click;

https://brainly.com/question/14083225

#SPJ1