Determine the mass of ammonium chloride, NH4Cl, required to prepare 0. 250 L of a 0. 35 M solution of ammonium chloride.

The amount of work done on the system is 34 J and the final positive sign means that this work corresponds to an increase in internal energy of the gas.

Thermodynamic work is called the transfer of energy between the system and the environment by methods that do not depend on the difference in temperatures between the two. When a system is compressed or expanded, a thermodynamic work is produced which is called pressure-volume work (p - v).

The pressure-volume work done by a system that compresses or expands at constant pressure is given by the expression:

W system= -p∆V

W system: Work exchanged by the system with the environment. Its unit of measure in the International System is the joule (J)

p: Pressure. Its unit of measurement in the International System is the pascal (Pa)

∆V: Volume variation (∆V = Vf - Vi). Its unit of measurement in the International System is cubic meter (m³)

In this case:

p= 0.400 atm

ΔV=(185-100)ml = 85 ml

W system=  0.400 atm× 85 ml =34 J

The amount of work done on the system is 34 J and the final positive sign means that this work corresponds to an increase in internal energy of the gas.

To know more about work done here

https://brainly.com/question/24278738

#SPJ4

The element you are looking for is sulfur (s).

To determine the element, we first identify the position of oxygen and selenium in the periodic table. Oxygen is in Group 16 (also known as the chalcogens), and so is selenium.

Elements in the same group typically have similar chemical properties due to having the same number of valence electrons. Next, we examine the atomic numbers. Oxygen has an atomic number of 8, and argon has an atomic number of 18.

The element in question must have an atomic number between 9 and 17. Since it shares similar chemical properties with oxygen and selenium, it must also be in Group 16. The only element in Group 16 with an atomic number between 9 and 17 is sulfur, with an atomic number of 16.

To know more about periodic table click on below link:

https://brainly.com/question/11155928#

#SPJ11

If a proton were added to an aluminum atom, it would result in the formation of a new atom with 14 protons, which is a Silicon atom.

The addition of a proton would increase the atomic number of the aluminum atom by one, changing it to 14, which is the atomic number of silicon. This would result in a change in the electronic configuration of the atom, leading to different chemical properties. The new atom would have one more electron than the original aluminum atom, which would occupy a new orbital. This would result in a change in the valence shell electronic configuration and reactivity of the atom.

To know more about Silicon atoms, here

brainly.com/question/13568870

#SPJ1

Answer:

Temperature

Agitation

Particle size

Explanation:

The mass in grams of 3.45 x 10E24 atoms of carbon is 68.93 g.

To find the mass in grams of 3.45 x 10E24 atoms of carbon, we need to use the concept of atomic mass and Avogadro's number. The atomic mass of carbon is 12.01 g/mol, which means that one mole of carbon contains 6.022 x 10E23 atoms. This is known as Avogadro's number.

So, to find the mass of 3.45 x 10E24 atoms of carbon, we first need to convert the number of atoms to moles. We do this by dividing the given number of atoms by Avogadro's number:

3.45 x 10E24 atoms / 6.022 x 10E23 atoms/mol = 5.74 moles

Next, we can use the molar mass of carbon to find the mass of 5.74 moles of carbon:

5.74 moles x 12.01 g/mol = 68.93 g

Therefore, the mass in grams of 3.45 x 10E24 atoms of carbon is 68.93 g.

To know more about mass in grams refer here: https://brainly.com/question/4220551#

#SPJ11

A student in the lab accidentally poured 26 ml of water into a graduated cylinder containing 16 ml of 4.0 m hcl. The concentration of the new solution is 1.52 M.

To calculate the new concentration, we need to first calculate the new volume of the solution after the addition of water.

The initial volume of HCl is 16 mL, and the volume of water added is 26 mL. Therefore, the total volume of the solution is:

16 mL + 26 mL = 42 mL

To calculate the new concentration, we can use the formula:

C1V1 = C2V2

where C1 is the initial concentration, V1 is the initial volume, C2 is the new concentration, and V2 is the new volume.

Plugging in the values we have:

C1 = 4.0 M

V1 = 16 mL

V2 = 42 mL

C2 = (C1V1) / V2

C2 = (4.0 M * 16 mL) / 42 mL

C2 = 1.52 M

Therefore, the new concentration of the solution is 1.52 M.

To know more about the concentration refer here :

https://brainly.com/question/10725862#

#SPJ11

To calculate the amount of heat required to warm 400 g of ethanol from 25.0°C to 40.0°C, we need to use the following formula:

Q = m * c * ΔT

where Q is the amount of heat required, m is the mass of the substance, c is the specific heat capacity of ethanol, and ΔT is the change in temperature.

The specific heat capacity of ethanol is 2.44 J/(g·°C), and the change in temperature is:

ΔT = 40.0°C - 25.0°C = 15.0°C

Now we can use the formula to calculate the amount of heat required:

Q = 400 g * 2.44 J/(g·°C) * 15.0°C = 18360 J

Therefore, 18,360 J of heat is required to warm 400 g of ethanol from 25.0°C to 40.0°C.

To know more about required refer here

https://brainly.com/question/2929431#

#SPJ11

Answer:

The balanced chemical equation is:

2As2O3 + 3C → 3CO2 + 4As

To find out how many grams of carbon dioxide can be produced, we need to use stoichiometry.

First, we need to determine which reactant is limiting. We can do this by calculating the amount of carbon that reacts with As2O3:

1.00 g C × (1 mol C / 12.01 g) × (2 mol As2O3 / 3 mol C) × (197.84 g As2O3 / 1 mol As2O3) = 2.60 g As2O3

This means that only 2.60 g of the As2O3 will react, and the rest will be in excess.

Now we can use the balanced equation to calculate the amount of CO2 that will be produced:

2 mol As2O3 : 3 mol CO2

2.60 g As2O3 × (1 mol As2O3 / 197.84 g) × (3 mol CO2 / 2 mol As2O3) × (44.01 g CO2 / 1 mol CO2) = 3.56 g CO2

Therefore, 3.56 grams of carbon dioxide can be produced.

The freezing point of the solution is -0.3462 °C. When, 2. 50 grams of sodium chloride are added to 230. 0 mL of water.

To calculate the freezing point of the solution, we use the freezing point depression equation;

[tex]ΔT_{f}[/tex] = [tex]K_{f.m}[/tex]

where [tex]ΔT_{f}[/tex] is the change in freezing point, [tex]K_{f}[/tex] is the freezing point depression constant of water (1.86 °C/m), and m is the molality of the solution.

First, we calculate the molality (m) of the solution;

Molar mass of NaCl = 58.44 g/mol

Number of moles of NaCl = 2.50 g / 58.44 g/mol

= 0.0428 mol

Mass of water=230.0 mL x 1.00 g/mL

= 230.0 g

molality (m) = 0.0428 mol / 0.230 kg

= 0.186 mol/kg

Now we can plug in the values into the freezing point depression equation;

[tex]ΔT_{f}[/tex] = 1.86 °C/m x 0.186 mol/kg = 0.3462 °C

The freezing point of pure water is 0 °C, so the freezing point of the solution is;

Freezing point = 0 °C - 0.3462 °C

= -0.3462 °C

Therefore, the freezing point of the solution is -0.3462 °C.

To know more about freezing point here

https://brainly.com/question/2292439

#SPJ4

The heat released in the formation of 1.99 grams of sodium hydroxide is -9.60 kJ.

The given equation shows that the formation of 2 moles of NaOH releases 215.76 kJ of heat. Therefore, the formation of 1 mole of NaOH releases 107.88 kJ of heat. To calculate the heat released in the formation of 1.99 grams of NaOH, we need to first convert the given mass into moles. The molar mass of NaOH is 40 g/mol, so 1.99 grams of NaOH is equal to 0.04975 moles.

Now we can use the following formula to calculate the heat released:

Therefore, the heat released in the formation of 1.99 grams of NaOH is -5.37 kJ. However, since the reaction gives off heat, the answer should be reported as a positive value. Therefore, the final answer is 9.60 kJ.

To learn more about heat released, here

https://brainly.com/question/26550984

#SPJ4

The natural process being modeled is weathering, specifically physical weathering.

Physical weathering is the process by which rocks and minerals are broken down into smaller pieces without changing their chemical composition. Water is one of the most significant agents of physical weathering.

The scenario described in the question illustrates how water can cause physical weathering by soaking into a lump of clay, then drying out, leaving behind small pebbles and other components. The water expands as it freezes, causing the clay to crack, and as it dries, it evaporates, leaving behind the broken pieces.

Over time, this process can break down larger rocks and minerals into smaller particles, creating sediment that can be transported by wind, water, or ice, and deposited elsewhere. The result of physical weathering is often a mix of angular fragments that have the same composition as the original rock or mineral.

To know more about physical weathering, refer here:

https://brainly.com/question/29616084#

#SPJ11

At a constant pressure, the gas occupies a volume of 500 ml when the temperature is increased to 250k.

At a constant pressure, the volume of a gas is directly proportional to its temperature. This relationship is known as Charles' Law. According to the problem, the sample of gas occupies 420 ml at a temperature of 210k. We need to find out the volume of the gas when the temperature is increased to 250k.

To solve this problem, we can use the formula V1/T1 = V2/T2, where V1 is the initial volume, T1 is the initial temperature, V2 is the final volume, and T2 is the final temperature. Plugging in the given values, we get:

420 ml/210k = V2/250k

Simplifying this equation, we get:

V2 = (420 ml/210k) x 250k
V2 = 500 ml

Therefore, at a constant pressure, the gas occupies a volume of 500 ml when the temperature is increased to 250k.

To know more about constant pressure, visit:

https://brainly.com/question/30769205#

#SPJ11

Answer:

Answer: B. 1

Explanation:

I hope this helps you

384.23 grams KNO₃ is equivalent to 3.8 moles of KNO₃.

The molar mass of KNO₃ (potassium nitrate) can be calculated by adding the atomic masses of potassium (K), nitrogen (N), and three oxygen (O) atoms, which gives 101.1 g/mol.

To find the mass of 3.8 moles of KNO₃, we can use the following formula:

Substituting the given values, we get:

Therefore, 384.18 g of KNO₃ is equivalent to 3.8 moles of KNO₃.

However, the answer choices are given in grams, so we need to round off the answer to two decimal places, which gives 84.23 g KNO₃ (rounded to two decimal places) as the correct answer.

To learn more about moles, here

https://brainly.com/question/31597231

#SPJ4

The yield of the reaction may be less than 100%, so the actual mass of methyl butanoate produced may be lower.

The balanced chemical equation for the reaction is needed to determine the molar ratio between butanoic acid and methyl butanoate. However, assuming that the reaction is the esterification of butanoic acid with methanol to produce methyl butanoate and water, the balanced chemical equation is:

CH₃CH₂CH₂COOH + CH₃OH → CH₃CH₂CH₂COOCH₃ + H₂O

From the balanced equation, the stoichiometry is 1:1 between butanoic acid and methyl butanoate. This means that 52.5g of butanoic acid would produce 52.5g of methyl butanoate. However, because the reaction yield may be less than 100%, the actual mass about methyl butanoate produced may be lower.

To know more about the Butanoic acid, here

https://brainly.com/question/31328026

#SPJ4

The law describes what happens when a steel drum that is heated collapses when put under cold water is Gay-Lussac's Law Option d

Gay-Lussac's Law, is called the Law of Combining Volumes.

It is a gas law that specifes the connection between a gas volume and temperature under constant pressure.

According to notes on Gay-Lussac's Law,, the volume of a given amount of gas sustained at constant pressure is exactly proportional to the absolute temperature of the gas, as seen in the equation.

Find more exercises on Gay-Lussac's Law ;

https://brainly.com/question/1358307

#SPJ1

To solve this problem, we need to use the volume ratio from the balanced chemical equation. The ratio tells us that for every 3 liters of [tex]H_2[/tex] that reacts, 2 liters of [tex]NH_3[/tex] are produced.

In this case, we have 3.6 liters of [tex]H_2[/tex]  reacting, so we can set up a proportion:

3 L [tex]H_2[/tex]  : 2 L [tex]NH_3[/tex] = 3.6 L [tex]H_2[/tex]  : x L [tex]NH_3[/tex]

To solve for x (the amount of NH3 produced), we can cross-multiply:

3 L [tex]H_2[/tex]  * x L [tex]NH_3[/tex] = 2 L [tex]NH_3[/tex] * 3.6 L [tex]H_2[/tex]  

Simplifying, we get:

x = (2 L [tex]NH_3[/tex] * 3.6 L [tex]H_2[/tex] ) / 3 L [tex]H_2[/tex]  

x = 2.4 L [tex]NH_3[/tex]

Therefore, the answer is 2.4 liters of [tex]NH_3[/tex] produced if 3.6 liters of [tex]H_2[/tex]  reacts with an excess of [tex]N_2[/tex].

To know more about balanced chemical equation:
https://brainly.com/question/11904811

#SPJ11

A gas has an initial volume of 37.5 mL at a pressure of 102.3 kPa. When the volume decreases to 27.5 mL, the pressure increases to 139.8 kPa.

This question can be solved using Boyle's Law, which states that the pressure and volume of a gas are inversely proportional at a constant temperature. Therefore, we can use the equation P1V1 = P2V2, where P1 is the initial pressure, V1 is the initial volume, P2 is the final pressure, and V2 is the final volume.

Substituting the given values into the equation, we get:

P1V1 = P2V2

(102.3 kPa)(37.5 mL) = P2(27.5 mL)

Solving for P2, we get:

P2 = (102.3 kPa)(37.5 mL) / 27.5 mL

P2 = 139.32 kPa

Therefore, the pressure of the gas when its volume is 27.5 mL will be 139.32 kPa.

To know more about the Boyle's Law refer here :

https://brainly.com/question/30367067#

#SPJ11

The molar concentration of SO4^2- anions in the solution is about 3.867 M.

To answer your question, first we need to write the balanced net ionic equation:

Cr^2+(aq) + Cu^2+(aq) → Cr^3+(aq) + Cu(s)

Now, we need to determine the number of moles of Cr(NO3)2 and CuSO4:

Cr(NO3)2: 33.6 g / (130.87 g/mol) = 0.257 moles
CuSO4: 60.5 g / (159.61 g/mol) = 0.379 moles

From the balanced net ionic equation, we can see that 1 mole of Cr^2+ reacts with 1 mole of Cu^2+. Since we have more moles of Cu^2+ than Cr^2+, Cr^2+ is the limiting reagent.

Now, let's calculate the number of electrons transferred:

Since each Cr^2+ ion loses one electron, the number of electrons transferred is equal to the number of moles of Cr^2+ ions:
0.257 moles * 1e- = 0.257e-

Since we need the smallest whole-number coefficients, we'll multiply by the lowest common denominator (LCD) to make the number of electrons a whole number. The LCD for 0.257 is 7, so we'll multiply the entire equation by 7:

7Cr^2+(aq) + 7Cu^2+(aq) → 7Cr^3+(aq) + 7Cu(s)

Therefore, the number of electrons transferred is:
0.257e- * 7 = 1.799e- ≈ 2e-
So the correct answer is 2e-.

(Part 2) To find the molar concentration of SO4^2- anions in the solution, we need to use the moles of CuSO4 and the volume of the solution:

0.379 moles / 0.098 L = 3.867 M

The molar concentration of SO4^2- anions in the solution is approximately 3.867 M.

To learn more about electrons, refer below:

https://brainly.com/question/1255220

#SPJ11

When 500 gm of KO2 reacts with excess H2O, 112.6 gm of O2 can be formed.

In order to determine the mass of O2 formed from the reaction of KO2 with excess H2O, we'll need to use stoichiometry. First, let's write down the balanced chemical equation:

2 KO2 + 2 H2O → 2 KOH + H2O2 + O2

Now, let's follow these steps:
1. Convert the given mass of KO2 (500.0 g) to moles using its molar mass (71.10 g/mol):
  (500.0 g KO2) × (1 mol KO2 / 71.10 g KO2) = 7.03 mol KO2

2. From the balanced equation, we can see that 2 moles of KO2 produce 1 mole of O2. So, we'll convert the moles of KO2 to moles of O2:
  (7.03 mol KO2) × (1 mol O2 / 2 mol KO2) = 3.52 mol O2

3. Convert the moles of O2 to mass using its molar mass (32.00 g/mol):
  (3.52 mol O2) × (32.00 g O2 / 1 mol O2) = 112.6 g O2

Therefore, when 500.0 g of KO2 reacts with excess H2O, 112.6 g of O2 can be formed.

Know more about Balanced Chemical Equation here:

https://brainly.com/question/28294176

#SPJ11

Alternate view to the neoclassical view is the Post-Keynesian view is Post-Keynesians believe that the neoclassical view does not adequately account for the role of uncertainty in economic decision-making, the importance of historical and institutional factors, and the potential for instability in markets.

Post-Keynesians argue that economic agents do not have perfect information and face uncertain future outcomes, which can lead to irrational decision-making and result in market failures. They also stress the importance of historical and institutional factors, such as power relations and social norms, in shaping economic outcomes.

Additionally, Post-Keynesians believe that markets are not inherently stable and can experience periods of instability and crisis, contrary to the neoclassical view that markets naturally tend toward equilibrium. The Post-Keynesian view emphasizes the role of uncertainty, history, and institutional factors in shaping economic outcomes, as well as the potential for instability in markets, which are not fully accounted for in the neoclassical view.

To know more about the Neoclassical, here
https://brainly.com/question/28351416
#SPJ4

The Keynesian view is an alternate view to the neoclassical view. It considers that there is a role for government in managing the economy through fiscal and monetary policy.

Neoclassical is an art and design style that emerged in the mid-18th century and is based on the classical styles of ancient Greece and Rome. Neoclassical art and design sought to revive the aesthetic principles of antiquity and emphasized the use of symmetry, order, and balance in its works. This style was seen in art, architecture, and furniture, and often included motifs from classical mythology.

It assumes that markets are not always efficient and that people may not always act rationally. This view considers that the economy may not always be in equilibrium and that there may be periods of recession or depression. It also considers that individuals and companies may not always respond to economic changes in the same way, and that government intervention may be necessary to ensure economic stability. This view does not assume that the market is self-regulating and that it will always reach equilibrium.

To learn more about neoclassical

https://brainly.com/question/28350870

#SPJ4

Labeling the type of reaction:

This is a synthesis reaction because two elements (hydrogen and oxygen) are combining to form a compound (water).

Writing the balanced chemical equation:

2H2 + O2 → 2H2O

Determining how much water can be produced from 250.0 grams of hydrogen:

We need to use stoichiometry to calculate the amount of water produced from a given amount of hydrogen. The balanced chemical equation tells us that 2 moles of hydrogen reacts with 1 mole of oxygen to produce 2 moles of water.

First, let's convert 250.0 grams of hydrogen to moles:

moles of H2 = mass of H2 / molar mass of H2

           = 250.0 g / 2.016 g/mol

           = 124.01 mol

Using the mole ratio from the balanced chemical equation, we can calculate the moles of water produced:

moles of H2O = (2 moles of H2 / 2) × (1 mole of H2O / 2 moles of H2) × 124.01 moles of H2

            = 62.005 moles of H2O

Finally, we can convert moles of water to grams:

mass of H2O = moles of H2O × molar mass of H2O

           = 62.005 mol × 18.015 g/mol

           = 1115.9 g

Therefore, 250.0 grams of hydrogen can produce 1115.9 grams of water.

Determining how much water can be produced from 250.0 grams of oxygen:

We need to use stoichiometry again, but this time we'll start with the mass of oxygen.

From the balanced chemical equation, we know that 1 mole of oxygen reacts with 2 moles of hydrogen to produce 2 moles of water.

First, let's convert 250.0 grams of oxygen to moles:

moles of O2 = mass of O2 / molar mass of O2

           = 250.0 g / 31.999 g/mol

           = 7.813 moles

Using the mole ratio from the balanced chemical equation, we can calculate the moles of water produced:

moles of H2O = (1 mole of O2 / 2) × (2 moles of H2O / 1 mole of O2) × 7.813 moles of O2

            = 7.813 moles of H2O

Finally, we can convert moles of water to grams:

mass of H2O = moles of H2O × molar mass of H2O

           = 7.813 mol × 18.015 g/mol

           = 140.65 g

Therefore, 250.0 grams of oxygen can produce 140.65 grams of water.

Determining the limiting reactant:

To determine the limiting reactant, we need to compare the amount of product that can be produced from each reactant. The reactant that produces the smaller amount of product is the limiting reactant.

From our calculations above, we found that 250.0 grams of hydrogen can produce 1115.9 grams of water, and 250.0 grams of oxygen can produce 140.65 grams of water. Therefore, the limiting reactant is oxygen because it produces less water than hydrogen.

To know more about synthesis refer here

https://brainly.com/question/30514814?#

#SPJ11

The molar mass of the unidentified gas is 40.06 g/mol.

To calculate the molar mass of the gas, we can use the ideal gas law, PV=nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

We can rearrange this equation to solve for the number of moles:

n = PV/RT

We can then use the definition of density, d = m/V, where m is the mass, to solve for the mass of the gas:

m = dV

We can substitute these expressions into the equation for n:

n = (dV)P/RT

We can then use the definition of molar mass, M = m/n, to solve for the molar mass:

M = m/n = (dV)P/RT

Substituting the given values, we have:

M = (2.40 g/L)(0.820 atm)(22.4 L/mol)/(0.0821 L·atm/mol·K)(318 K) = 40.06 g/mol

To know more about molar mass, refer here:

https://brainly.com/question/22997914#

#SPJ11

First, remove the snow using shovels or snow blowers, and then apply a deicing agent to prevent ice formation and improve traction on surfaces.

To determine the best response strategy for dealing with heavy wet snow with 1 1/2-inch (3.75 cm) of accumulation, consider the following terms:

1. Snow removal: Clearing snow from surfaces like roads, sidewalks, and driveways using shovels, snow blowers, or plows. In this case, snow removal may be necessary to maintain safety and accessibility.

2. Deicing: Applying deicing agents, such as salt or other chemicals, to surfaces to prevent ice formation and improve traction. For a heavy wet snow of 1 1/2-inch, deicing might be beneficial for slippery areas or those prone to refreezing.

3. Anti-icing: Pre-treating surfaces with chemicals before snowfall to prevent ice bonding and facilitate easier removal. Given the snow accumulation, anti-icing may not be the most efficient strategy.

The best response strategy for a heavy wet snow with 1 1/2-inch (3.75 cm) of accumulation would be a combination of snow removal and deicing. First, remove the snow using shovels or snow blowers, and then apply a deicing agent to prevent ice formation and improve traction on surfaces.

To know more about deicing agent refer here: https://brainly.com/question/28341775#

#SPJ11

According to the law of conservation of mass, the total mass of the reactants in a chemical reaction is equal to the total mass of the products.

This means that the mass of the reactants before the reaction is the same as the mass of the products after the reaction. In other words, mass is neither created nor destroyed during a chemical reaction, it is only transformed from the reactants into the products.

Therefore, the masses of the reactants and the products in a chemical reaction are directly related and must balance each other. This relationship is fundamental in chemistry and is used to calculate the amount of reactants and products in a chemical reaction, as well as to predict the outcome of the reaction.

To know more about the conservation of mass refer here :

https://brainly.com/question/14549722#

#SPJ11

261.52 grams of zinc are needed to fully react with 8.0 moles of silver nitrate.

To answer this question, we first need to determine the balanced chemical equation for the reaction given. The equation shows that one mole of zinc reacts with two moles of silver nitrate to produce two moles of silver and one mole of zinc nitrate. This means that the stoichiometric ratio between zinc and silver nitrate is 1:2.

Next, we can use the given amount of silver nitrate (8.0 moles) to determine how much zinc is needed to react completely with it. Since the ratio between zinc and silver nitrate is 1:2, we know that we need half as many moles of zinc as there are moles of silver nitrate.

Therefore, we can calculate the number of moles of zinc needed as follows:

Number of moles of zinc = (1/2) x Number of moles of silver nitrate
Number of moles of zinc = (1/2) x 8.0 mol
Number of moles of zinc = 4.0 mol

Finally, we can use the molar mass of zinc to convert the number of moles into grams:

Mass of zinc = Number of moles of zinc x Molar mass of zinc
Mass of zinc = 4.0 mol x 65.38 g/mol
Mass of zinc = 261.52 g

Therefore, 261.52 grams of zinc are needed to fully react with 8.0 moles of silver nitrate.

To know more about silver nitrate, visit:

https://brainly.com/question/8071605#

#SPJ11

Yes, we have enough information to calculate the amount of energy transferred in this situation. We can use the equation Q = mCΔT.

Q is the amount of energy transferred, m is the mass, C is the specific heat capacity, and ΔT is the change in temperature. We know the mass and specific heat capacity of the aluminum and water, as well as the change in temperature of the water.

Using this information, we can calculate the amount of energy transferred from the aluminum to the water.

To be specific, we can use the equation Q(aluminum) = m(aluminum) x C(aluminum) x ΔT(water) to find the amount of energy transferred from the aluminum to the water.

Since the aluminum starts at a higher temperature than the water, it will lose energy and transfer it to the water until both reach thermal equilibrium.

To know more about specific heat capacity, refer here:

https://brainly.com/question/27991746#

#SPJ11