Answer:
what is the energy rate? or how much energy do you have.
Explanation:
Elements with the same number of electron shells are in the same
Answer:
Elements with the same number of electrons in their outermost shell show similar chemical properties. Example 1: Fluorine, chlorine, bromine, and iodine each have 7 electrons in their outermost shell. These so-called halogens are also quite similar in their chemical behavior.
The current temperature in Atlanta, Georgia is 24°C. What is this temperature in Kelvin?
Answer:
297.15kelvin is the correct answer
Answer:297 k
Explanation:
Landon is investigating the coastal area near where he lives. He has found that one end of the coastal area without barrier islands is losing beach area, but the other end that is bordered with barrier islands has a beach area that has remained the same size. Why is the size of the beach decreasing on the end without barrier islands?
Answer:
Explanation:
Barrier Islands act just as the name states, they are barriers that protect the beaches. They exist to absorb the majority of the external energies that waves, hurricanes, storms, etc. Without it, the beaches begin to become absorbed by the ocean, due to the destructive energy these factors apply, as well as eroding away all rocks into the ocean. This is mainly why the beach with a barrier island is completely protected while the one without a barrier island is decreasing in size.
Island barriers grow near the continent protecting the coasts from erosive factors. The beach with no islands decreases in size because there are no physical limitations that protect the continent from erosion.
------------------------
Barrier islands are deposition of material -sand or any other substrate- that lay on a rocky surface. They get formed near the continent, parallel to the coasts. They play a significant role in avoiding the erosion process.
These islands receive the direct impact of storms, winds, and waves action. Their shape is very dynamic, being constantly modeled by these erosive factors.
These barriers protect the continent from winds, waves, tides, streams, storms, hurricanes, and any other meteorological event that might cause erosion and destruction.
They absorb the energy produced by erosive factors. They also provide a protected area behind them that allows the formation of estuaries and swamps.
A wide diversity of species inhabit these islands, becoming significant spots to protect their biodiversity.
The beach is decreasing on the end without the barrier islands because there is no physical limitations that can protect the continent from the action of waves, tides, and winds, among others. The coasts get eroded, and the beach gets smaller.
----------------------------------
You can learn more about Island barriers at
https://brainly.com/question/20329416?referrer=searchResults
https://brainly.com/question/23171142?referrer=searchResults
Determine whether each of the molecules below is polar or nonpolar. Tetrahedral C C l 4 CClX4 Nonpolar Tetrahedral C H 3 O H CHX3OH Polar Trigonal pyramidal N H 3 NHX3 Nonpolar Linear C S 2 CSX2 Nonpolar
Answer:
CCl4 - Nonpolar
CH3OH - polar
NH3 - polar
CS2 - Nonpolar
Explanation:
One important thing that we should know is that polarity has to do with the presence of a resultant dipole moment in a molecule.
Dipole moment is a vector quantity, This means that its direction is also taken into account when discussing the dipole moment of molecules.
Hence, symmetrical molecules such as CS2 and CCl4 are non-polar even though they have polar bonds because their dipoles cancel out(zero resultant dipole moment).
On the other hand, NH3 and CH3OH are non-symmetrical molecules hence they possess an overall dipole moment and are polar molecules.
What is the numerical value of the rate constant for a reaction in which [A] is reduced from 0.380 M to 0.215 M in a span of 26.3 s? Assume the units of the rate constant are s-1. Please enter your response to three of significant figures using E notation. For example, to report 1347.54 to three significant figures, type: 1.35E3
Answer:
k = 2.17E-2 s-1
Explanation:
Initial Concentration [A]o = 0.380 M
Final Concentration [A] = 0.215 M
time, t = 26.3 s
Unit of rate constant = s-1
Rate constant = ?
The units of the rate constant depends on the order of the reaction. This is a first order reaction due to the units.
The integral rate law for a first order reaction is;
ln[A] = ln[A]o - kt
ln(0.215) = ln(0.380) - k(26.3)
ln(0.215) - ln(0.380) = - k(26.3)
- k(26.3) = -0.57
k = 0.57 / 26.3 = 0.02167
Reporting to three significant figures using E notation;
k = 2.17E-2 s-1
The function of this organelle is to create energy (ATP) through the process of cellular respiration.
Answer choices:
A. lysosome
B. endoplasmic reticulum
C. mitochondrion
D. golgi apparatus
Answer:
C
Explanation:
I hope this is correct and have a great day
Science
What part of all organisms Is involved in the exchanging of gases
Answer:
Gas exchange occurs in microscopic dead-end air-filled sacs called alveoli, where a very thin membrane (called the blood-air barrier) separates the blood in the alveolar capillaries (in the walls of the alveoli) from the alveolar air in the sacs.
Explanation:
Hard water often contains dissolved Ca^2+ and Mg^2+ ions. One way to soften water is to add phosphates. The phosphate ion forms insoluble precipitates with calcium and magnesium ions, removing them from solution. A solution is 0.055 MM in calcium chloride and 0.075 MM in magnesium nitrate. What mass of sodium phosphate would you add to 1.0 LL of this solution to completely eliminate the hard water ions? Assume complete reaction.
Answer:
14.2g of sodium phosphate are required
Explanation:
To solve this question we need to find the moles of Ca²⁺ and Mg²⁺ ions. And based on the reactions:
3Ca²⁺ + 2PO₄³⁻ → Ca₃(PO₄)₂ (s)
3Mg²⁺ + 2PO₄³⁻ → Mg₃(PO₄)₂ (s)
we can find the moles of phosphate required to precipitate all these ions and its mass:
Moles Ca²⁺:
1.0L * (0.055mol / L) = 0.055mol
Moles Mg²⁺:
1.0L * (0.075mol / L) = 0.075mol
Total moles = 0.13 moles of ions
Moles of phosphate ion required:
0.13 moles * (2 moles PO₄³⁻ / 3 moles ions) = 0.0867 moles PO₄³⁻
The moles of sodium phosphate (Na₃PO₄) are = 0.0867 moles
The mass is -Molar mass Na₃PO₄: 164g/mol-:
0.0867 moles Na₃PO₄ * (164g / mol) =
14.2g of sodium phosphate are requiredWhich of the following variables has the least effect on the rate a substance dissolved in a container of water?
A. The force of the stirring
B. The size of the container
C. The temperature of the water
D. The surface area of the substance
Given the formula of a compound
What is the molecular formula for this compound?
1.
CH
2.
CH2
3.
CH3
4.
C₃H6
Answer:
4
Explanation:
three carbon atoms combined with six hydrogen atoms
There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, the correct option is option D.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
An ionic compound is a metal and nonmetal combined compound. Ionic compound are very hard. They have high melting and boiling point because of strong ion bond.
Covalent compounds are formed between elements whose electronegativity difference is not very high. Covalent compounds are soft, these compounds have low melting and boiling point. The given compound is C₃H6.
Therefore, the correct option is option D.
To learn more about chemical compound, here:
brainly.com/question/26487468
#SPJ2
7
Which of the following is a correct model for nitrogen?
Answer:
you never gave us the choices to go over. sorry
Concentration data is commonly monitored during a reaction to determine the order with respect to a reactant. Consider the types of observations listed, and determine which order is likely for that reactant. Assume all other factors are held constant. The reaction rate increases in direct proportion to the concentration of the reactant in solution.
1. An increase in the concentration of the reactant in solution causes the reaction rate to increase exponentially.
a. first order.
b. second order.
c. zero order.
2. The reaction rate is constant regardless of the amount of reactant in solution.
a. first order.
b. second order.
c. zero order.
3. The reaction rate increases in direct proportion to the concentration of the reactant in solution.
a. first order.
b. second order.
c. zero order.
Answer:
1) first order
2) zero order
3) second order
Explanation:
For a first order reaction, the concentration of the reactants varies exponentially with the rate of reaction. The curve of a first order reaction shows an exponential relationship between the rate of reaction and the change in the concentration of reactants.
For a zero order reaction, the rate of reaction is independent of the concentration of the reactants. So, regardless of the amount of reactant in solution, the rate of reaction is constant.
For a second reaction, the reaction rate increases in direct proportion to the concentration of the reactant in solution.
The reaction between nitric oxide and oxygen is described by the following chemical equation:
2NO+ 2O2 â 2NO2
2NO+ 2O2 â 2NO2 + O
Suppose a two-step mechanism is proposed for this reaction, beginning with this elementary reaction. Suppose also that the second step of the mechanism should be bimolecular. Suggest a reasonable second step. That is, write the balanced chemical equation of a bimolecular elementary reaction that would complete the proposed mechanism.
Answer:
See explanation
Explanation:
A non elementary reaction is a reaction that does not take place in a single reactive encounter. Non elementary reactions take place in steps. These steps are referred to as the reaction mechanism.
The reaction between nitric oxide and oxygen is a non elementary reaction. It takes place in two steps as i will now show below;
Step 1
NO(g) + O2(g) -------> NO2(g) + O(g)
Step 2
NO(g) + O(g) ---------> NO2(g)
Overall reaction equation
2NO(g) + O2(g) ----------> 2NO2(g)
Answer:
NO(g)+O(g)---> NO_2(g)
Explanation:
What is it called when a plant bends in a response to light
An
In phototropism a plant bends or grows directionally in response to light. Shoots usually move towards the light; roots usually move away from it.
Explanation:
Hope This Helps
Select all of the Earth Systems that contain carbon.
Oa Atmosphere
Ob Geosphere
Oc Biosphere
Od Hydrosphere
Answer:
a, c, d
Explanation:
biosphere atmosphere hydrosphere lithosphere
Calculate the relative formula mass of Zn(NO3)2. Round your answer to the nearest whole number?
Answer:
189
Explanation:
189
The relative formula mass of Zn(NO₃)₂ is 189.38g.
How do we calculate the mass of any compound?Molecular mass of any formula of compound will be calculated by adding the molar mass of each atoms present in the given compound.
Molecular mass of Zn(NO₃)₂ = Sum of the molar mass of Zinc, nitrogen and oxygen atoms.
Molecular mass of Zn(NO₃)₂ = 65.38g/mol + 2(14g/mol) + 6(16g/mol) = 189.38g
Hence the required mass of Zn(NO₃)₂ is 189.38g.
To know more about molecular mass, visit the below link:
https://brainly.com/question/15476873
#SPJ2
give the result of the following expression with the correct number of significant figures
[tex]84 \frac{m}{s} \times 32.533s[/tex]
What is the relationship between an object’s height above the ground and its gravitational potential energy?
Answer:
Explanation:
The formula for gravitational potential energy is the mass*gravity*height. Therefore, the greater the distance from the ground, the higher the gravitational potential energy.
Answer: The amount of gravitational potential energy an object has depends on mass of the object and height of the object above ground. Objects that are at large height above the ground have more potential energy. Similarly, objects that are at small height above the ground have less potential energy.
6. What is the highest
labeled point on the
map?
7. What is the difference
in elevation between the
highest point on the map
and point W?
8. Which letter (W.XY
or Z) represents a
gentle slope?
9. What is the elevation
of point X?
Answer: I think 35
Explanation:
Organelles______are specialized structures that carry out particular jobs and functions?
Worked with radium to learn about radioactive elements.
Answer:
WHat did u mean?
In calculating the relationship between the amount of heat added to a substance and the corresponding temperature change, the specific heat capacity is usually represented by which symbol
Answer:
C.
Explanation:
Specific heat capacity of a substance can be defined as the amount of heat a gram of the substance must lose or absorb in order to change its temperature by a degree Celsius. It is measured in Joules per kilogram per degree Celsius (J/kg°C).
Generally, the specific heat capacity of water is 4.182J/kg°C and is the highest among liquids.
Heat capacity or quantity of heat is given by the formula;
[tex] Q = mcdt[/tex]
Where;
Q represents the heat capacity or quantity of heat.
m represents the mass of an object.
c represents the specific heat capacity of the substance.
dt represents the change in temperature.
Hence in calculating the relationship between the amount of heat added to a substance and the corresponding temperature change, the specific heat capacity is usually represented by the symbol C.
_______ is the measure of how much water vapor is in the air
Answer:
Humidity is the measure of how much water vapor is in the air.
Many food chains together create a______
Choose all true statements about the water molecule: Choose all true statements about the water molecule: Bonding between the oxygen and hydrogen within the molecule happens due to hydrogen bonding. Water is a permanent electric dipole, having permanent charge separation. Water is not naturally polarized, and gets polarized only due to external electric forces.
Answer: Water is a permanent electric dipole, having permanent charge separation.
Explanation:
Hydrogen bonding is an intermolecular force having partial ionic-covalent character.
In [tex]H_2O[/tex], O is a highly electronegative atom attached to a H atom through a covalent bond. The oxygen atoms being more electronegative gets partial negative charge and H atom gets partial positive charge. Thus water is permanent electric dipole.
Hydrogen bonding takes place between a hydrogen atom (attached with an electronegative atom O) and an electronegative atom (O).
The true statement about water molecules are Bonding between the oxygen and hydrogen within the molecule happens due to hydrogen bonding and water is a permanent electric dipole, having permanent charge separation.
What are hydrogen bonds?Hydrogen bonds is a kind of attraction force which is present between the more electronegative atom and hydrogen atom.
In water molecule, 2 hydrogen atoms and one oxygen atom is present and between the more electronegative oxygen atom and hydrogen atom, hydrogen bond is present.And due to electronegative nature of oxygen atom, they withdraw all the electron density of the bond towards itself as a result of which it possesses permanent electric dipole. Because partial negative charge is present on oxygen atom and partial positive charge is present on the hydrogen atom.Hence options (1) and (2) are correct.
To know more about water molecule, visit the below link:
https://brainly.com/question/24647400
What mass of HBO2 is produced from the
combustion of 139.5 g of B2H6?
Answer in units of g.
Answer:
[tex]m_{HBO_2}=441.8gHBO_2[/tex]
Explanation:
Hello there!
In this case, since the combustion of B2H6 is:
[tex]B_2H_6+3O_2\rightarrow 2HBO_2+2H_2O[/tex]
Thus, since there is 1:2 mole ratio between the reactant and product, the produced grams of the latter is:
[tex]m_{HBO_2}=139.5gB_2H_6*\frac{1molB_2H_6}{27.67gB_2H_6} *\frac{2molHBO_2}{1molB_2H_6} *\frac{43.82gHBO_2}{1molHBO_2}[/tex]
[tex]m_{HBO_2}=441.8gHBO_2[/tex]
Best regards!
In the desert, wind picks up and carries fine particles of sand and dirt. As 5 points
the wind blows against the rocks, the particles rub against the rocks and
wear them down in a process called: *
Weathering
Erosion
Deposition
Compaction/Cementation
What are the four Earth systems that contribute to the rock cycle?
C
It’s wrong I need points
The rock cycle includes the geosphere, hydrosphere, biosphere, and atmosphere. The wearing of the rock particles is called weathering. Thus, option a is correct.
What is weathering?Weathering is the process of sediment formation where the parent rocks and substances get disintegrated through natural biochemical and physical factors.
The parent rocks get deteriorated into smaller fine particles and sediments by the action of the strong wind and water. The movement causes the particles to dissolve the minerals on the surface.
The method of weathering, erosion, deposition, and compaction/ cementation is the part of the rock cycle that comprises the four major spheres including geosphere, hydrosphere, biosphere, and atmosphere.
Therefore, option a. in weathering the particles get disintegrated due to air and water.
Learn more about weathering here:
https://brainly.com/question/23449272
#SPJ6
How many formula units are in 4.52 moles of H3SO3?
Type your answer
Answer:
The answer is 98.07848. We assume you are converting between grams H2SO4 and mole. You can view more details on each measurement unit: This compound is also known as Sulfuric Acid. The SI base unit for amount of substance is the mole. 1 grams H2SO4 is equal to 0.010195916576195 mole.
Quick conversion chart of moles H2SO3 to grams
1 moles H2SO3 to grams = 82.07908 grams
2 moles H2SO3 to grams = 164.15816 grams
3 moles H2SO3 to grams = 246.23724 grams
4 moles H2SO3 to grams = 328.31632 grams
5 moles H2SO3 to grams = 410.3954 grams
6 moles H2SO3 to grams = 492.47448 grams
7 moles H2SO3 to grams = 574.55356 grams
8 moles H2SO3 to grams = 656.63264 grams
9 moles H2SO3 to grams = 738.71172 grams
10 moles H2SO3 to grams = 820.7908 grams
Gauging yourself against others is acceptable in competitive sports.
Answer:
Yup it is acceptable.
U comparing yourself will place u above and below some people for sure.
So you will know to where you have to develop and can get yourself satisfied as you will be above some people.
Gauging yourself against others is acceptable in competitive sports is acceptable.
What is Competitive sports?Faster, higher, stronger is the Olympic motto frequently used in competitive sports. The Olympic slogan "To be there is everything" causes confusion, although it is actually highly false and the complete reverse.
Competitive athletes receive a planned training program. To attain particular objectives, the quantity and quality of each individual training block are carefully calculated.
The scope, duration, number, and load of each individual training unit are adjusted according to the level of fitness and the proximity to the season's peak throughout the year.
Therefore, Gauging yourself against others is acceptable in competitive sports is acceptable.
To learn more about competitive sports, refer to the link:
https://brainly.com/question/28193168
#SPJ5
Copper(II) chloride hydrate, also known as copper chloride hydrate, is the inorganic compound with the chemical formula CuCl2 . x(H2O), where x can range from 1 to 7. A 2.060 g sample of copper (II) chloride hydrate was dissolved in 50.0 mL of deionized water. The concentration of copper (II) ion in the solution was determined spectrophotometrically using the equation from the calibration curve, was 0.200 M. Determine the formula of the copper (II) chloride hydrate.
Answer:
CuCl₂·4H₂O
Explanation:
First we calculate the moles of copper (II) ion in the solution, using the given volume and concentration:
50.0 mL ⇒ 50.0/1000 = 0.05 L0.05 L * 0.200 M = 0.01 mol Cu⁺²For each Cu⁺² mol there's also one CuCl₂ mol.
We convert 0.01 CuCl₂ moles into grams, using its molar mass:
0.01 CuCl₂ mol * 134.45 g/mol = 1.344 gThat means that out of the 2.060 g of the sample, 1.344 g are of CuCl₂. This means that there are (2.060 - 1.344) 0.716 g of water.
We convert those 0.716 g of water to moles:
0.716 g ÷ 18 g/mol = 0.04 mol H₂OThere are four times as many H₂O moles as there are CuCl₂ moles. This means the formula is CuCl₂·4H₂O