Determine the amount of heat required to convert 46. 0 g of ethanol at 25°c to the vapor phase at 78°c. Based on the melting and boiling points, ethanol is a liquid at 25°c. Consider the heating curve when organizing your thoughts and answering the question. Use the information about ethanol ch3ch2oh given in the table below.

Answer:

sorry xouldnt answer all

Explanation:

thier is ¹² equations ln tour answer

The most likely source of a substance containing carbon, hydrogen, oxygen, and nitrogen is a living organism, such as a plant or an animal.

This is because these four elements are the main components of organic matter, which is found in living things. Carbon is the backbone of organic molecules, while hydrogen and oxygen are also found in many organic compounds, including carbohydrates and lipids.

Nitrogen is an essential component of amino acids, which are the building blocks of proteins. Therefore, if a substance contains all four of these elements, it is likely that it was produced by a living organism or is a byproduct of a living organism's metabolism.

However, this is not always the case, as there are other sources of these elements, such as fossil fuels, which contain carbon and hydrogen, and water, which contains hydrogen and oxygen.

To know more about organic matter, refer here:

https://brainly.com/question/11165274#

#SPJ11

The chemical reaction is

2 K + Na2O -> K2O + 2 Na

The given chemical equation represents a reaction between potassium (K) and sodium oxide (Na2O). The products formed in this reaction are potassium oxide (K2O) and sodium (Na).

On the reactant side, we have two atoms of potassium and two atoms of sodium, while on the product side, we have two atoms of potassium and two atoms of sodium as well.

Therefore, the equation is already balanced with respect to the number of potassium and sodium atoms.

However, we need to balance the oxygen atoms. On the reactant side, we have one molecule of Na2O, which contains two atoms of oxygen. On the product side, we have one molecule of K2O, which also contains two atoms of oxygen. Thus, the equation is balanced.

Finally, we can write the balanced equation as:

2 K + Na2O → K2O + 2 Na

To know more about  chemical equation refer here:

https://brainly.com/question/30087623

#SPJ11

The pressure inside a container that contains 25 grams of argon is 0.34 atm.

The pressure inside a container can be calculated using the following expression;

PV = nRT

Where;

According to this question, 25 grams of argon in a container has a volume of 60 liters and at a temperature of 400 K.

P × 60 = 0.625 × 0.0821 × 400

60P = 20.525

P = 0.34 atm

Learn more about pressure at: https://brainly.com/question/18124975

#SPJ1

Answer:

-2.6 mL.

Explanation:

To solve this question, we need to use the formula:

V1/T1 = V2/T2

where V1 and T1 are the initial volume and temperature of the gas, and V2 and T2 are the final volume and temperature of the gas. We also need to convert the temperatures from degrees Celsius to kelvins by adding 273.15. Plugging in the given values, we get:

50.0 mL / (48.0 + 273.15) K = V2 / (3 + 273.15) K

Solving for V2, we get:

V2 = 50.0 mL x (3 + 273.15) K / (48.0 + 273.15) K V2 = 47.4 mL

Therefore, the change in volume is:

ΔV = V2 - V1 ΔV = 47.4 mL - 50.0 mL ΔV = -2.6 mL

The negative sign indicates that the volume decreases when the gas is cooled.

The answer is -2.6 mL.

The final volume of the gas is 31.4 L when cooled from 45.0°C to 12.0°C.

The Charles's law states the relationship between the volume and the temperature of a gas when the pressure is constant. We can use the formula for the relationship between volume and temperature of a gas: [tex]\frac{V_{1} }{T_{1} }[/tex] = [tex]\frac{V_{2} }{T_{2} }[/tex]

where [tex]V_{1}[/tex] and [tex]T_{1}[/tex] are the initial volume and temperature, and [tex]V_{2}[/tex] and [tex]T_{2}[/tex] are the final volume and temperature.

We are given [tex]V_{1}[/tex] = 35.0 L and [tex]T_{1}[/tex] = 45.0°C = 45.0°C + 273.15 = 318.15 K,

and we need to find [tex]V_{2}[/tex] when [tex]T_{2}[/tex] = 12.0°C = 12.0°C + 273.15 = 285.15 K .  

Now by using the formula:

35.0 L / 318.15 K = [tex]V_{2}[/tex] / 285.15 K

[tex]V_{2}[/tex] = (35.0 L / 318.15 K) × 285.15 K

[tex]V_{2}[/tex] = 31.4 L

Therefore, the final volume of the gas is 31.4 L when cooled from 45.0°C to 12.0°C.

To know more about Charles's law visit:

https://brainly.com/question/16927784

#SPJ11

The excess reactant will be oxygen.

To determine the excess reactant, we need to compare the amount of moles of each reactant to the stoichiometry of the balanced equation. The stoichiometric ratio between magnesium and oxygen is 2:1, which means that for every 2 moles of magnesium, 1 mole of oxygen is required for complete reaction.

In this case, we have 7.8 moles of magnesium and 4.7 moles of oxygen. Based on the stoichiometric ratio, we can see that 7.8 moles of magnesium require 3.9 moles of oxygen (2 moles of oxygen for every 1 mole of magnesium). Since we only have 4.7 moles of oxygen, it is the limiting reactant, and magnesium will be in excess.

Therefore, after the reaction is complete, all of the magnesium will be consumed, and some oxygen will be left over. The product of the reaction will be 7.8 moles of magnesium oxide.

To learn more about reactions, here

https://brainly.com/question/28984750

#SPJ4

Answer:

false

Explanation:

magnetic field lines can be accurately observed using *iron filling*

The volume (in liters) of NO₂ at STP that can be produced when 25 g of Cu react with concentrated nitric acid, HNO₃ is 17.6 liters

First, we shall determine the mole in 25 g of Cu. Details below:

Mole = mass / molar mass

Mole of Cu = 25 / 63.55

Mole of Cu = 0.393 mole

Next, we shall determine the mole of of NO₂ produced from the reaction. Details below:

Cu + 4HNO3 -> Cu(NO₃)₂ + 2NO₂ + 2H₂O

From the balanced equation above,

1 mole of Cu reacted to produced 2 moles of NO₂

Therefore,

0.393 mole of Si will react to produce = 0.393 × 2 = 0.786 mole of NO₂

Finally, we shall obtain the volume of NO₂ produced at STP. Details below

At STP,

1 mole of NO₂ = 22.4 Liters

Therefore,

0.786 moles of NO₂ = 0.786 × 22.4

0.786 moles of NO₂ = 17.6 liters

Thus, we can conclude that the volume of NO₂ produced is 17.6 liters

Learn more about volume:

https://brainly.com/question/225322

#SPJ1

The number of moles of nitrogen gas that will occupy a volume of 5L at 3.85 atm and 27°C is determined using the ideal gas law equation. After calculations, it is found to be approximately 0.7919 moles. Thus, 0.7919 moles of nitrogen gas occupy 5L at 3.85 atm and 27°C.

To calculate the number of moles of nitrogen gas that will occupy a volume of 5L at 3.85 atm and 27°C, we can use the ideal gas law equation:

PV = nRT

where P is the pressure in atmospheres, V is the volume in liters, n is the number of moles, R is the gas constant (0.08206 L·atm/K·mol), and T is the temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin:

T = 27°C + 273.15 = 300.15 K

Next, we can rearrange the ideal gas law equation to solve for the number of moles:

n = PV / RT

Plugging in the values, we get:

[tex]n = \frac{{(3.85 \, \text{atm}) \cdot (5 \, \text{L})}}{{(0.08206 \, \text{L} \cdot \text{atm/K} \cdot \text{mol}) \cdot (300.15 \, \text{K})}}[/tex]

Simplifying the expression, we get:

n = 0.7919 moles

Therefore, 0.7919 moles of nitrogen gas will occupy a volume of 5L at 3.85 atm and 27°C.

To know more about the ideal gas law equation refer here :

https://brainly.com/question/11544185#

#SPJ11

A solution of 0. 600M HCl is used to titrate 15. 00 mL of KOH solution. The endpoint of titration is reached after the addition of 27. 13 mL of HCI. The concentration of the KOH solution is (b) 1.09 M.

To solve this problem, we can use the balanced chemical equation for the reaction between HCl and KOH:

HCl + KOH → KCl + H₂O

From the balanced equation, we can see that one mole of HCl reacts with one mole of KOH.

Given that 0.600 M HCl is used and 27.13 mL is added to reach the endpoint, we can calculate the number of moles of HCl used:

moles HCl = M x V = 0.600 M x 0.02713 L = 0.01628 mol HCl

Since the reaction is 1:1, there must be 0.01628 mol of KOH in the 15.00 mL solution. We can calculate the concentration of KOH as follows:

Molarity = moles / volume

Molarity = 0.01628 mol / 0.01500 L = 1.09 M

Therefore, the concentration of the KOH solution is (b) 1.09 M.

To know more about the titration refer here :

https://brainly.com/question/31309007#

#SPJ11

The true statements regarding the greenhouse effect are:

The greenhouse effect is a natural process that occurs when certain gases in the atmosphere, known as greenhouse gases, trap heat from the sun and prevent it from escaping back into space. This helps to keep the Earth's surface warm enough to support life. However, human activities, such as burning fossil fuels, have increased the concentration of greenhouse gases in the atmosphere, which has led to an enhanced greenhouse effect and global warming.

In the greenhouse effect, not all energy from the sun is absorbed by atmospheric gases. Rather, some of it is reflected back into space by the atmosphere. Additionally, the greenhouse effect does not change sunlight into carbon dioxide; rather, it is the burning of fossil fuels and other human activities that release carbon dioxide into the atmosphere. Options B, C and E are correct.

To know more about the Greenhouse effect, here

https://brainly.com/question/29000016

#SPJ4

A total of 96,320 kJ / 17 kJ per gram of protein = 5,670 grams of protein.

To determine the grams of protein needed to produce 23,000 calories of energy, we need to convert the calories to kilojoules (kJ) and then divide by the energy produced by each gram of protein.

23,000 calories = 96,320 kJ (1 calorie = 4.184 kJ)
Each gram of protein produces 17 kJ of energy.


Protein is an important nutrient for our bodies, as it provides the building blocks for our muscles, bones, and other tissues. It also plays a role in many cellular functions and processes. One of the functions of protein is to provide energy for our bodies, although this is not its primary role.

When we eat protein, our bodies break it down into amino acids, which can then be used for various purposes. One of these purposes is to produce energy.

Every gram of protein contains 4 calories, or 17 kilojoules, of energy. This is less than the amount of energy provided by a gram of fat (9 calories or 37 kilojoules) or a gram of carbohydrate (4 calories or 17 kilojoules), but it is still significant.

To know more about cellular functions click on below link:

https://brainly.com/question/30112418#

#SPJ11

When selenium (Se) is found in the compound SEO42-, it has undergone hybridization to form sp3 hybrid orbitals.

Hybridization is the process by which atomic orbitals of different energy levels combine to form hybrid orbitals with the same energy level. In SEO42-, the Se atom is bonded to four oxygen (O) atoms, and to form these bonds, the Se atom has to hybridize its orbitals.

In its ground state, Se has six valence electrons in its outermost shell - two in the 4s orbital and four in the 4p orbital. To form the four bonds with O, Se hybridizes its orbitals by promoting an electron from the 4s orbital to the 4p orbital. This gives Se four half-filled 4p orbitals, which then hybridize to form four sp3 hybrid orbitals.

Each of these hybrid orbitals is then used to form a sigma bond with one of the four O atoms.

In summary, when Se is found in SEO42-, it undergoes sp3 hybridization to form four sp3 hybrid orbitals, each of which is used to form a sigma bond with one of the four O atoms. This hybridization results in a tetrahedral arrangement of the atoms around the Se atom in the molecule.

To know more about hybridization, visit:

https://brainly.com/question/14140731#

#SPJ11

The temperature of the gas when the volume of the container increases to 1074 mL is 358.15 K or 85.0°C

The behavior of gases is affected by several factors including temperature, pressure, and volume. One important principle that applies to gases is that they tend to occupy the entire volume of their container. Therefore, if the volume of the container increases, the gas will occupy more space.

In this particular scenario, the gas initially occupies 900 mL at a temperature of 27.0°C. When the volume of the container increases to 1074 mL, we need to determine the corresponding temperature of the gas. To do this, we can use the formula:

(V1/T1) = (V2/T2)

Where V1 and T1 represent the initial volume and temperature of the gas, respectively, and V2 and T2 represent the final volume and temperature of the gas, respectively.

Substituting the given values into the formula, we get:

(900/300.15) = (1074/T2)

Simplifying the equation, we can cross-multiply and solve for T2:

900T2 = 1074 x 300.15

T2 = 1074 x 300.15 / 900

T2 = 358.15 K

Therefore, the temperature of the gas when the volume of the container increases to 1074 mL is 358.15 K or 85.0°C (rounded to one decimal place).

To know more about temperature, visit:

https://brainly.com/question/11464844#

#SPJ11

Measuring the volume of rinse water does not significantly impact the overall volume during titration.

Titration is a commonly employed laboratory method that involves determining the concentration of an unknown solution by reacting it with a solution of known concentration, known as the titrant, until the chemical reaction between the two is fully completed. This process requires precision and accuracy to ensure reliable results are obtained.

To guarantee that all reactants are thoroughly mixed and avoid any skewing of results due to reactants left on the walls of the container, it is useful to rinse the sides of the beaker or flask with distilled water during titration. However, measuring the volume of rinse water used is not necessary as it does not significantly impact the overall volume of titrant used in titration. It is crucial to be mindful not to use an excessive amount of rinse water as this can dilute the sample and compromise result accuracy. Rest assured that accuracy will not be affected by the volume of rinse water used, but it's essential to maintain a balance between thorough rinsing and preserving sample concentration.

To know more about titration, click here

https://brainly.com/question/31271061

#SPJ1

Yes, elements that make up polyatomic ions share their electrons.

Polyatomic ions are ions that are composed of more than two atoms.

Atoms are covalently bonded to each other  and in the entire structure non-neutral charge is present .The bonding electrons are distributed throughout the polyatomic ions and they are not localized between two atoms. A polyatomic ion is a molecule that can be ionized by either gaining or losing of electrons. The group of covalently bonded atoms altogether carries a net charge, this is because the total number of electrons in a molecule is not equal to the total number of protons present in the molecule.

To know more about polyatomic ions here

https://brainly.com/question/12852496

#SPJ4

In the Bohr model of the atom, electrons can exist only in certain discrete energy levels, or orbits, around the nucleus. When an electron transitions between two orbits with different energy levels, it absorbs or emits a photon of electromagnetic radiation with a specific energy corresponding to the difference in energy between the two levels.

If an electron absorbs a photon, it gains energy and moves to a higher energy level, or outer orbit. This is known as an "excited state". However, this is unstable, and the electron will eventually return to its original energy level, or ground state, by emitting a photon with the same energy as the absorbed photon.

On the other hand, if an electron emits a photon, it loses energy and moves to a lower energy level, or inner orbit. This is known as a "relaxed state". In this case, the emitted photon has an energy equal to the difference in energy between the two levels.

Overall, when an electron makes a transition between orbits, it either absorbs or emits a photon of electromagnetic radiation, with the energy of the photon corresponding to the difference in energy between the two levels.

To know more about Bohr model refer to-

https://brainly.com/question/3964366

#SPJ11

The types of chemical bonds present in a material determine the arrangement of atoms or molecules at the microscopic level, which in turn determines the properties of the material at the macroscopic level.

For example, materials with ionic bonds tend to have high melting and boiling points due to the strong electrostatic attraction between positively and negatively charged ions. Covalently bonded materials tend to have lower melting and boiling points due to the weaker intermolecular forces between molecules.

Metallic bonding leads to high electrical and thermal conductivity due to the delocalization of electrons within the metal lattice. These different bond types and resulting material properties are important in understanding the behavior and applications of different materials.

To know more about the Covalently bonded refer here :

https://brainly.com/question/14509196#

#SPJ11

CsBr has a larger lattice energy than LiCl because Cs+ has a larger ionic radius and a greater charge than Li+.

The lattice energy of an ionic compound is determined by the strength of the electrostatic attraction between the ions in the solid crystal lattice. This attraction is influenced by the charges on the ions and the distance between them. The larger the charge on the ions, the greater the lattice energy, and the smaller the distance between them, the greater the lattice energy.

Br- also has a greater charge density than Cl-, making the electrostatic attraction between Cs+ and Br- stronger than that between Li+ and Cl-. Therefore, CsBr has a higher lattice energy than LiCl.

Learn more about lattice energy, here:

https://brainly.com/question/31730061

#SPJ1

Answer: 134g NH3

Explanation:

Diatomic Hydrogen has a mass of 2.016g/mol

to find how many moles of H2 we have divide how much we have by the molar mass.

23.5g/2.016= 11.66 moles

the ratio between H2 moles and NH3 moles is 3 moles of H2 produce 2 moles of NH3 so we multiply using a 2/3 ratio to find how many moles of NH3 we have

11.66mol H2 x (2molNH3/3molH2) = 7.77 moles NH3

now we multiply the number of moles of NH3 by the molar mass of NH3 (17.3g/mol) to find how many grams of NH3 we have.

7.77 x 17.3g = 134.4g NH3 or using 3 sig figs 134g NH3

When zinc reacts with hydrochloric acid, the response bubbles vigorously as hydrogen fueloline is produced.

The manufacturing of a fueloline is likewise an illustration that a chemical response is occurring. When dilute hydrochloric acid is introduced to granulated zinc positioned in a take a look at tube, zinc metallic is transformed to zinc chloride and hydrogen fueloline is developed withinside the response. In the response we will see that a zinc chloride salt is fashioned and hydrogen fueloline is developed. The developed hydrogen fueloline is colourless and odourless. When Zinc granules reacts with Hydrochloric acid ,it'll produces hydrogen fueloline and zinc chloride.

To learn more about hydrochloric acid check the link below-

https://brainly.com/question/24586675

#SPJ4

Answer:

Carbon and silicon are both in Group 14 of the periodic table, which means they have similar electronic configurations and therefore similar bonding properties. However, the difference in melting and sublimation temperatures of their oxides, silicon oxide and solid carbon dioxide, respectively, can be attributed to differences in their structure and bonding.

Silicon oxide (SiO2) has a giant covalent structure, in which each silicon atom is covalently bonded to four oxygen atoms and each oxygen atom is covalently bonded to two silicon atoms. This gives rise to a three-dimensional network of strong covalent bonds, which requires a large amount of energy to be broken. Therefore, silicon oxide has a high melting point of 2440°C because a lot of energy is required to overcome the strong covalent bonds and melt the solid.

On the other hand, solid carbon dioxide (CO2) has a molecular structure, in which each carbon atom is double bonded to two oxygen atoms. The carbon dioxide molecules are held together by weak intermolecular forces, such as Van der Waals forces, which are much weaker than the strong covalent bonds present in silicon oxide. As a result, solid carbon dioxide can sublime at -70°C, without melting into a liquid, because the intermolecular forces can be overcome by relatively low energy input.

In summary, the difference in melting and sublimation temperatures of silicon oxide and solid carbon dioxide can be explained by the difference in their bonding types and structures. Silicon oxide has a giant covalent structure with strong covalent bonds that require a large amount of energy to break, resulting in a high melting point. Solid carbon dioxide has a molecular structure held together by weak intermolecular forces, which can be overcome by relatively low energy input, resulting in a low sublimation point.

The changes that occur in the parent nucleus during gamma decay are limited to the emission of a gamma ray and the associated decrease in energy. The mass and atomic number of the nucleus remain unchanged.

In gamma decay, the parent nucleus does not undergo any changes in terms of its mass or atomic number. Instead, the nucleus emits a gamma ray, which is a high-energy photon. This gamma ray is released as the nucleus transitions from an excited state to a lower energy state.

The emission of a gamma ray does not affect the number of protons or neutrons in the nucleus. This means that the atomic number and mass number of the nucleus remain the same before and after gamma decay.

However, the emission of a gamma ray does result in a decrease in the energy of the nucleus. This is because gamma rays have a very high frequency and carry a lot of energy. By releasing a gamma ray, the nucleus is able to shed some of this excess energy and move to a lower energy state.

For more such questions on nucleus

https://brainly.com/question/5223117

#SPJ11

480 mL of the HCl solution with a pH of 1.3 can be neutralized by one dose of milk of magnesia assuming the concentration of magnesium hydroxide is 0.2 M.

To determine the volume of [tex]HCl[/tex] solution that can be neutralized by milk of magnesia, we need to know the concentration of the milk of magnesia.

Assuming milk of magnesia is a suspension of solid magnesium hydroxide in water, we need to know the concentration of magnesium hydroxide [tex](Mg(OH)2)[/tex] in the suspension.

Let's assume that the concentration of magnesium hydroxide in milk of magnesia is 0.2 M.

The balanced chemical equation for the neutralization reaction between [tex]HCl[/tex] and[tex]Mg(OH)2[/tex]is:

[tex]2HCl + Mg(OH)2 - > MgCl2 + 2H2O[/tex]

From the equation, we can see that two moles of [tex]HCl[/tex] react with one mole of [tex]Mg(OH)2[/tex].

To determine the volume of [tex]HCl[/tex] solution, we need to calculate the number of moles of [tex]Mg(OH)2[/tex] in one dose of milk of magnesia:

0.2 M = 0.2 moles / liter

Let's assume one dose of milk of magnesia is 30 mL, or 0.03 L. Then the number of moles of [tex]Mg(OH)2[/tex] in one dose is:

0.2 moles / L x 0.03 L = 0.006 moles Mg(OH)2

Therefore, this amount of [tex]Mg(OH)2[/tex] would require:

2 x 0.006 = 0.012 moles of [tex]HCl[/tex] for complete neutralization

Now, let's calculate the volume of [tex]HCl[/tex] solution needed to provide 0.012 moles of [tex]HCl[/tex].

The volume of [tex]HCl[/tex] solution can be calculated using the balanced chemical equation and the molarity of the [tex]HCl[/tex] solution:

2 moles HCl / 1 mole [tex]Mg(OH)2[/tex] x 0.012 moles [tex]Mg(OH)2[/tex] / 1 = 0.024 moles HCl

[tex]pH = -log[H+]1.3 = -log[H+]\\[H+] = 5 x 10^-2 M[/tex]

Now we can calculate the volume of the HCl solution using the equation:

moles = concentration x volume

0.024 moles = [tex]5 x 10^-2 M x volume[/tex]

volume = 0.48 L or 480 mL

To know more about  milk of magnesia refer to-

https://brainly.com/question/22066653

#SPJ11

To determine the volume of 0.8m NaOH required to titrate 300 ml of 0.6m phosphoric acid, we first need to understand the mole ratio between the two substances. According to the given assumption of a 1:1 mole ratio, one mole of NaOH reacts with one mole of phosphoric acid.

Next, we can calculate the number of moles of phosphoric acid present in the solution by multiplying the molarity (0.6m) by the volume (300ml) and converting to moles using the molecular weight of phosphoric acid. This gives us 0.108 moles of phosphoric acid.

Since the mole ratio is 1:1, we will need 0.108 moles of NaOH to completely titrate the phosphoric acid. To determine the volume of 0.8m NaOH required to provide 0.108 moles, we can use the formula:

moles = molarity x volume (in liters)

Rearranging this equation, we get:

volume (in liters) = moles / molarity

Substituting the values, we get:

volume (in liters) = 0.108 moles / 0.8m = 0.135 liters

Multiplying this by 1000ml/liter, we get the final answer:

Volume of 0.8m NaOH required = 135 ml.

To know more about phosphoric acid refer here

https://brainly.com/question/3700851#

#SPJ11

It takes approximately 406,687.5 joules of energy to take 150 grams of ice from -15°C to 125°C.

To determine the amount of energy required to take ice from -15°C to 125°C, we need to consider two stages of the process; Heating the ice from -15°C to 0°C, causing it to melt, and Heating the resulting water from 0°C to 125°C

We can calculate the amount of energy required for each stage separately and then add them together to get the total energy required.

Heating the ice from -15°C to 0°C; The specific heat capacity of ice is 2.09 J/(g·°C), which means that it takes 2.09 joules of energy to raise the temperature of 1 gram of ice by 1°C. Since we have 150 grams of ice, we can calculate the amount of energy required to raise the temperature of the ice from -15°C to 0°C as;

Q1 = m × c × ΔT

= 150 g × 2.09 J/(g·°C) × (0°C - (-15°C))

= 4,987.5 J

Therefore, it takes 4,987.5 joules of energy to heat the ice from -15°C to 0°C

Heating the water from 0°C to 125°C; The specific heat capacity of water is 4.18 J/(g·°C), which means that it takes 4.18 joules of energy to raise the temperature of 1 gram of water by 1°C. We need to heat the water from 0°C to 100°C (the boiling point of water at standard pressure) and then from 100°C to 125°C.

For the first stage, we can calculate the amount of energy required as;

Q₂a = m × c × ΔT

= 150 g × 4.18 J/(g·°C) × (100°C - 0°C)

= 62,700 J

The heat of vaporization of water at standard pressure is 2,260 J/g. Since we have 150 grams of water, we can calculate the amount of energy required to convert all the water to steam as:

Q₂b = m × Lv = 150 g × 2,260 J/g

= 339,000 J

Therefore, it takes a total of;

Q = Q₁ + Q₂a + Q₂b

= 4,987.5 J + 62,700 J + 339,000 J

= 406,687.5 J

Therefore, it takes 406,687.5 joules of energy.

To know more about heat of vaporization here

https://brainly.com/question/11465845

#SPJ1

One way to reduce the volume of hydrogen gas needed to power a car for 400 km is to use a technology called on-board hydrogen storage.

This involves compressing the hydrogen gas to very high pressures, typically between 5,000 and 10,000 psi, which significantly reduces its volume.

Another method is to use liquid hydrogen storage, which involves cooling hydrogen gas to its boiling point (-423.17°F or -252.87°C) and storing it in a cryogenic tank. At this temperature, hydrogen gas is in its liquid state and takes up much less space than when it is in its gaseous state.

Both of these methods of hydrogen storage can greatly reduce the volume of hydrogen needed to power a car for 400 km, making hydrogen fuel cell cars more practical and feasible for everyday use.

To know more about hydrogen gas, refer here:

https://brainly.com/question/143551553#

#SPJ11

The approximate equilibrium partial pressure of NO gas is 0.005 atm.

The balanced chemical equation for the reaction is:

N2(g) + O2(g) ⇌ 2NO(g)

The equilibrium constant expression for this reaction is:

[tex]Kp = (PNO)2 / (PN2)(PO2)[/tex]

At equilibrium, let x be the partial pressure of NO gas. Then the partial pressures of N2 and O2 gas will both be (0.100 - x) atm. Substituting these values into the equilibrium constant expression and solving for x gives:

[tex]0.50 = x^2 / (0.100 - x)^2\\0.50(0.100 - x)^2 = x^2\\0.005 - 0.1x + 0.5x^2 = x^2\\0.5x^2 - 0.1x + 0.005 = 0[/tex]

Using the quadratic formula, we can solve for x:

[tex]x = [0.1 ± sqrt(0.1^2 - 4(0.5)(0.005))] / (2(0.5)) \\x = [0.1 ± 0.195] / 1 \\x = 0.295 or x = 0.005[/tex]

Since the initial partial pressures of N2 and O2 are both 0.100 atm, the equilibrium partial pressure of NO cannot be greater than 0.100 atm. Therefore, the only possible solution is:

x = 0.005 atm

To know more about equilibrium, here

brainly.com/question/30807709

#SPJ4

a) The ionization reaction of nitric acid (HNO₃) with water can be written in two different ways:

HNO₃ + H₂O → H₃O⁺ + NO₃⁻

or

HNO₃ + H₂O ⇌ H⁺ + NO₃⁻ + H₂O

Both equations are balanced.

b) The two expressions for the acid dissociation constant (Ka) can be derived from the two equations above:

Ka = [H₃O⁺][NO₃⁻] / [HNO₃]

or

Ka = [H⁺][NO₃⁻] / [HNO₃]

c) Nitric acid is a strong acid, meaning that it fully dissociates in water. As a result, the concentration of HNO3 in the equation is very low, making the Ka value very large. In fact, the Ka value for nitric acid is around 24, which is significantly higher than the Ka values for weak acids. This indicates that nitric acid is a very strong acid.

Let us learn more about this.

a) Ionization reaction - The ionization reaction refers to the process in which a molecule or compound dissociates into ions when it comes into contact with a solvent such as water. In the case of nitric acid (HNO₃), when it is added to water, it ionizes to produce hydronium ions (H₃O⁺) and nitrate ions (NO₃⁻), which is represented by the following balanced equation: HNO₃ + H₂O -> H₃O⁺ + NO₃⁻

b) Ka - To define Ka, we need to first understand that it is the equilibrium constant for the ionization reaction, which indicates the strength of an acid. Specifically, Ka measures the extent to which an acid dissociates in water, which can be expressed as the following two equations: Ka = [H₃O⁺][NO₃⁻]/[HNO₃] Ka = [H⁺][NO₃⁻]/[HNO₃] where [H₃O⁺] and [H⁺] represent the concentration of hydronium ions, and [NO₃⁻] and [HNO₃] represent the concentration of nitrate ions and nitric acid, respectively.

c) As nitric acid is a strong acid, it dissociates completely in water, meaning that the concentration of H₃O⁺ and NO₃⁻ ions will be high compared to the concentration of undissociated HNO₃. Therefore, the value of Ka for this reaction will be very large, indicating that nitric acid is a strong acid with a high degree of ionization.

Learn more about Ka at https://brainly.com/question/31432380

#SPJ11