Daria performed an experiment in which she randomly pulled a marble from a bag, recorded its color, put it back, and then repeated. The following table represents the number of times each color of marble was pulled.

Color of Marble Frequency
Yellow 26

Green 34

Purple 18

Red 22


If Daria repeats the experiment 50
more times, how many of those times should she expect to pull a yellow marble?

Based on study, it appears that mind-set does matter for maids in terms of weight loss - simply thinking they are exercising more may have led to greater weight loss in the informed group.

To determine whether mind-set matters in terms of weight loss for the maids, we need to conduct a hypothesis test.

Null Hypothesis: The average weight loss for the informed group of maids is equal to the average weight loss for the uninformed group of maids.

Alternative Hypothesis: The average weight loss for the informed group of maids is greater than the average weight loss for the uninformed group of maids.

We can use a one-sided t-test to test this hypothesis, since we are interested in whether the informed group lost more weight than the uninformed group.

Using the data provided, we can calculate the sample mean and standard deviation for each group:

Informed group:

Sample size (n) = 44

Sample mean = 2.00 lbs

Sample standard deviation = 2.50 lbs

Uninformed group:

Sample size (n) = 76

Sample mean = 1.33 lbs

Sample standard deviation = 2.31 lbs

We can use a t-test with unequal variances (since the sample standard deviations are different) to test the hypothesis. Using a significance level of 0.05 and a one-tailed test, the critical t-value is 1.67 (from a t-distribution with 118 degrees of freedom).

The calculated t-value is: t = (2.00 - 1.33) / sqrt((2.50^2/44) + (2.31^2/76)) = 1.80

Since the calculated t-value (1.80) is greater than the critical t-value (1.67), we reject the null hypothesis and conclude that there is evidence that the informed group of maids lost more weight than the uninformed group of maids.

To know more about null hypothesis refer to

https://brainly.com/question/25263462

#SPJ11

The measure of angle B is 60 degrees. The given triangle ABC is an isosceles triangle since two sides, AC and BC, are equal in length to 7 cm.

Therefore, the angle opposite the base (AB) will be equal in measure.

To find the measure of angle B, we need to use the cosine rule, which relates the length of sides of a triangle to the cosine of the angle opposite the side.

According to the cosine rule, cos(B) = ([tex]a^{2}[/tex] + [tex]c^{2}[/tex] - [tex]b^{2}[/tex]/(2ac). Substituting the values, we get cos(B) = ([tex]7^{2}[/tex] + [tex]7^{2}[/tex] - [tex]7^{2}[/tex])/(2x7x7), cos(B) = 1/2, B = [tex]cos^{-1}[/tex](1/2), B = 60°

Therefore, the measure of angle B is 60 degrees.

To know more about isosceles triangle, refer here:

https://brainly.com/question/19987277#

#SPJ11

Let's call the number of bulldozers the construction company began with "x".

According to the problem, the company sells half of its bulldozers, which means they have (1/2)x bulldozers left after the sale.

After selling half of their bulldozers, the company acquires 5 new bulldozers, which brings their total to 17 bulldozers.

So we can write an equation based on this information:

(1/2)x + 5 = 17

To solve for x, we can start by subtracting 5 from both sides:

(1/2)x = 12

Then, we can multiply both sides by 2 to isolate x:

x = 24

Therefore, the construction company began with 24 bulldozers.

To know more about company refer here

https://brainly.com/question/30532251#

#SPJ11

Step-by-step explanation:

area= base*height (8+10)*16=288

perimeter=2L+2B

to find L we will use Pythagorean theorem(check attachment for the solving to find L)

L=17.8

perimeter= 2(17.8)+2(18)

=71.77

=71.8

To dy/dx when x = - 1 and dx/dt =5. dy/dt =

dy/dt = -35.

To find dy/dt, first we need to find dy/dx. Given y = 5x^2 + 3x, we can differentiate y with respect to x:

[tex]dy/dx = d(5x^2 + 3x)/dx = 10x + 3[/tex]
Now, we need to find dy/dx when x = -1:

[tex]dy/dx(-1) = 10(-1) + 3 = -10 + 3 = -7[/tex]
We are given that dx/dt = 5. To find dy/dt, we use the chain rule:

[tex]dy/dt = dy/dx * dx/dt[/tex]

Substitute the values we found:

dy/dt = (-7) * (5) = -35

So, dy/dt = -35.

To learn more about chain rule, refer below:

https://brainly.com/question/28972262

#SPJ11

The expression for the total volume of the building is V = L × W × H.

Volume is defined as the space occupied within the boundaries of an object in three-dimensional space.

To write an expression for the total volume of a building, we'll need to consider the dimensions of the building: length (L), width (W), and height (H). The volume of a rectangular building can be calculated using the formula:

Total Volume (V) = Length (L) × Width (W) × Height (H)

So, the expression for the total volume of the building is V = L × W × H.

Learn more about volume,

https://brainly.com/question/27710307

#SPJ11

The lower and upper quartiles are calculated by finding the average of two values when there is an even number of data points in the dataset. Specifically, the lower quartile (Q1) is the average of the middle two values when the dataset is sorted in ascending order, and the upper quartile (Q3) is the average of the middle two values when the dataset is sorted in descending order.

Learn more about average

brainly.com/question/27646993

#SPJ11

The value from the Student's t distribution that we would use to calculate a 95% confidence interval is 2.048

When the population standard deviation, σ, is unknown, we use the sample standard deviation, s, to estimate it. The t-distribution is used to calculate the confidence interval when we have a small sample size (less than 30) and the population standard deviation is unknown.

The value from the t-distribution that we would use to calculate a 95% confidence interval for the mean with a sample size of 28 is the t-value with 27 degrees of freedom, denoted by t(0.025,27) is 2.048.

This value can be obtained from a t-distribution table or calculator, and it represents the number of standard errors away from the mean that corresponds to a 95% confidence interval.

Learn more about t distribution at https://brainly.com/question/30895354

#SPJ11

The solution to the quadratic equation using quadratic formula is: -1 or -1/2

The general form of expression of a quadratic equation is:

ax² + bx + c = 0

The quadratic formula for solving quadratic functions is:

x = [-b ± √(b² - 4ac)]/2a

If we have a quadratic equation as: 5x² + 6x + 1 = 0.

Using quadratic formula, we have:

x = [-6 ± √(6² - 4(5*6))]/2*5

x = -1 or -1/2

Read more about Quadratic formula at: https://brainly.com/question/1214333

#SPJ1

The probability that the first survey indicates four children in the family and the second survey indicates one child in the family is 1/50.

We have,

To find the probability of the first survey indicating four children in the family and the second survey indicating one child in the family, we need to consider the number of surveys that fit this condition and divide it by the total number of possible surveys.

According to the table, the number of surveys indicating four children in the family is 8, and the total number of surveys is:

= 9 + 18 + 22 + 8 + 3 = 60.

Since the first survey is returned to the stack and can be chosen again, the probability of the first survey indicating four children in the family is 8/60.

For the second survey, there are 9 surveys indicating one child in the family (as the first survey is returned to the stack and can be chosen again), and the total number of surveys remains 60.

Therefore, the probability of the second survey indicating one child in the family is 9/60.

To find the probability of both events occurring, we multiply the individual probabilities:

Probability = (8/60) x (9/60) = 72/3600 = 1/50

Thus,

The probability that the first survey indicates four children in the family and the second survey indicates one child in the family is 1/50.

Learn more about probability here:

https://brainly.com/question/14099682

#SPJ12

The complete question:

Number of children in family     Number of surveys

one                                                      9

tqo                                                     18

three                                                  22

four                                                      8

five or more                                        3

The probability that a randomly chosen part has either a major flaw or a minor flaw is 22% or 0.22.

To find the probability that a randomly chosen cast aluminum part has a flaw (major or minor), we can simply add the percentages of parts with minor flaws and major flaws together.

From the given information, 20% of the parts had minor flaws and 2% had major flaws. When we add these percentages together, we get:

20% (minor flaws) + 2% (major flaws) = 22%

Thus, there is a 22% probability that a randomly chosen part has a flaw, either major or minor. Rounded to two decimal places, this would be written as 0.22.

In summary, by considering the percentages of parts with minor and major flaws, we can determine the overall probability of selecting a flawed part. In this case, the probability is 22% or 0.22 when rounded to two decimal places.

Learn more about probability here: https://brainly.com/question/25839839

#SPJ11

The annual rate of inflation between the two time periods is approximately 3.05%.

To calculate the annual rate of inflation, we can use the formula:

Annual Inflation Rate = ((Current Price - Past Price) / Past Price) * 100 / Number of Years

Plugging in the values, we have:

((3.25 - 1.75) / 1.75) * 100 / 20 ≈ 0.153 * 100 / 20 ≈ 3.05%

Therefore, the annual rate of inflation between the two time periods is approximately 3.05%.

Inflation refers to the general increase in prices over time, which leads to a decrease in the purchasing power of money. In this case, the cost of a gallon of milk has increased from $1.75 to $3.25 over 20 years. By calculating the annual rate of inflation, we find that prices have been rising at an average rate of 3.05% per year during this period.

This means that the cost of goods and services, including milk, has increased by an average of 3.05% each year due to inflation. It highlights the importance of considering inflation when comparing prices and understanding the impact it has on the value of money over time.

In conclusion, based on the given information, the annual rate of inflation between the two time periods is approximately 3.05%, indicating the increase in the cost of a gallon of milk over 20 years.

To know more about annual rate of inflation refer here:

https://brainly.com/question/31987528

#SPJ11

The exact value of the trigonometric function is cos θ = (√3 + 1) / 2√2.

In this problem we find the exact value of a trigonometric function, from which we need to determine the exact value of another trigonometric function. This can be done by using definitions of trigonometric functions:

tan θ = y / x

cos θ = x / √(x² + y²)

Where:

If we know that y = √3 - 1 and x = √3 + 1, then the exact value of the other trigonometric function is:

cos θ = (√3 + 1) / √[(√3 + 1)² + (√3 - 1)²]

cos θ = (√3 + 1) / √(3 + 2√3 + 1 + 3 - 2√3 + 1)

cos θ = (√3 + 1) / √8

cos θ = (√3 + 1) / 2√2

To learn more on trigonometric functions: https://brainly.com/question/29090818

#SPJ1

Answer: Apartment

Confidence

Cooperating

Disrespect

Encode

Forearm

Injustice

Intercontinental

Interplanetary

Mold

Overgrown

Refuel

Repaid

Semi-Sweet

Semicircular

Shield

Subzero

Supermarket

Transportation

Unbelievably

Step-by-step explanation:

Answer:

15

13

6

11

7

1

4

12

17

16

10

8

9

19

3

18

2

5

14

20

The future value of Payton's investment will be $1,048.29 when he cashes in the bond on the maturity date 15 years from now.

To calculate the future value of Payton's 15-year treasury bond, we can use the formula for compound interest:

FV = PV * (1 + r/n)^(n*t)

where FV is the future value, PV is the present value (or face amount), r is the interest rate (as a decimal), n is the number of times the interest is compounded per year, and t is the time period in years.

In this case, the present value is $700, the interest rate is 2.5% or 0.025, the interest is compounded quarterly, so n = 4, and the time period is 15 years.

Plugging in the values, we get:

FV = $700 * (1 + 0.025/4)^(4*15)

FV = $700 * (1 + 0.00625)^60

FV = $700 * 1.49756

FV = $1,048.29

Therefore, the future value of Payton's investment will be $1,048.29 when he cashes in the bond on the maturity date 15 years from now.

To learn more about investment, click here:

https://brainly.com/question/15353704

#SPJ11

The given data is an example of a nonlinear function. Therefore, the answer is A.

The given data consists of two sets of numbers, X and Y, where each value of X has a corresponding value of Y. We can observe that the points do not lie on a straight line. Instead, the plotted points form a curved shape, which indicates that the relationship between X and Y is not a linear function.

A linear function is a function where the relationship between the input variable (X) and output variable (Y) is a straight line. In this case, we can observe that as the value of X increases, the value of Y increases at an increasing rate, which means the relationship between X and Y is not linear.

In particular, the relationship between X and Y is a quadratic function since the values of Y are the squares of the corresponding values of X.

Therefore, the answer is A.

To learn more about linear/non-linear click on,

https://brainly.com/question/276828

#SPJ1

To determine which postulate can be used to prove that triangle CAT and triangle DOG are congruent, we need information about the side lengths and angles of each triangle. Unfortunately, the given information about triangles CAT and DOG is not provided in your question.

However, I can briefly explain each of the mentioned postulates to help you understand how they can be applied to prove congruence:

1. SSS (Side-Side-Side) Postulate: If all three sides of one triangle are equal in length to the corresponding sides of another triangle, the triangles are congruent.

2. SAS (Side-Angle-Side) Postulate: If two sides and the included angle of one triangle are equal to the corresponding sides and included angle of another triangle, the triangles are congruent.

3. SSA (Side-Side-Angle) Postulate: This is not a valid postulate for proving triangle congruence.

4. ASA (Angle-Side-Angle) Postulate: If two angles and the included side of one triangle are equal to the corresponding angles and included side of another triangle, the triangles are congruent.

5. AAS (Angle-Angle-Side) Postulate: If two angles and a non-included side of one triangle are equal to the corresponding angles and non-included side of another triangle, the triangles are congruent.

Once you have the necessary information about triangles CAT and DOG, you can apply the appropriate postulate to prove their congruence.

To know more about congruent refer here

https://brainly.com/question/12413243#

#SPJ11

The size of the square that needs to be cut out of each corner to create a box of maximum volume is 5/3 inches.

To determine the function f given that f'(x)=6x² – 5 sin x+eˣ and f(0) = 20, we need to integrate f'(x) with respect to x to obtain f(x), and then use the initial condition f(0) = 20 to find the value of the constant of integration.

Integrating f'(x) with respect to x, we have:

f(x) = 2x³ + 5 cos x + eˣ + C

where C is the constant of integration.

Using the initial condition f(0) = 20, we have:

f(0) = 2(0)³ + 5 cos 0 + e⁰ + C = 6 + C = 20

Therefore, the constant of integration is C = 14, and the function f(x) is:

f(x) = 2x³ + 5 cos x + eˣ + 14

To determine the size of the square that needs to be cut out of each corner of a standard piece of notebook paper to create a box of maximum volume, we can start by drawing a diagram of the box and labeling the sides as follows:

| |

| |

| | h

| |

|__________|

L

Let x be the length of each side of the square that is cut out of each corner. Then, the length and width of the base of the box will be L - 2x and 11 - 2x, respectively, and the height of the box will be x. Therefore, the volume V of the box can be expressed as:

V(x) = x(L - 2x)(11 - 2x)

Expanding and simplifying, we get:

V(x) = -4x³ + 46x² - 110x

To find the size of the square that maximizes the volume of the box, we need to find the value of x that maximizes V(x). This can be done by finding the critical points of V(x) and determining whether they correspond to a maximum or minimum.

Taking the derivative of V(x) with respect to x, we get:

V'(x) = -12x² + 92x - 110

Setting V'(x) = 0 and solving for x, we get:

x = 5/3 or x = 11/6

To determine whether these values correspond to a maximum or minimum, we can use the second derivative test. Taking the second derivative of V(x) with respect to x, we get:

V''(x) = -24x + 92

Evaluating V''(5/3) and V''(11/6), we find that:

V''(5/3) = -4 < 0, so x = 5/3 corresponds to a maximum.

V''(11/6) = 20 > 0, so x = 11/6 corresponds to a minimum.

Therefore, the size of the square that needs to be cut out of each corner to create a box of maximum volume is 5/3 inches.

To learn more about maximum volume visit: https://brainly.com/question/20866652

#SPJ11

To verify that the function f(x) = -4x^2 + 12x - 4ln x attains an absolute maximum and absolute minimum on [1/2,2], we can use the Extreme Value Theorem.

First, we need to check if the function is continuous on the interval [1/2,2] and differentiable on the open interval (1/2,2).

The function is continuous on [1/2,2] because it is a polynomial and the natural logarithm function is continuous on its domain.

To check if it is differentiable on (1/2,2), we need to take the derivative:

f'(x) = -8x + 12 - 4/x

This is defined and continuous on the open interval (1/2,2).

Now we can find the critical points by setting f'(x) = 0:

-8x + 12 - 4/x = 0

Multiplying both sides by x and rearranging, we get:

-8x^2 + 12x - 4 = 0

Dividing by -4, we get:

2x^2 - 3x + 1 = 0

This factors as (2x - 1)(x - 1) = 0, so the critical points are x = 1/2 and x = 1.

We also need to check the endpoints of the interval:

f(1/2) = -4(1/4) + 6 - 4ln(1/2) = 2 - 4ln(1/2)

f(2) = -4(4) + 12(2) - 4ln(2) = 8 - 4ln(2)

Now we can compare the function values at the critical points and endpoints to find the absolute maximum and minimum:

f(1/2) = 2 - 4ln(1/2) ≈ 5.39

f(1) = -4(1) + 12(1) - 4ln(1) = 8

f(2) = 8 - 4ln(2) ≈ 0.31

So the absolute maximum value is 8, which occurs at x = 1, and the absolute minimum value is 0.31, which occurs at x = 2.

Therefore, the function f(x) = -4x^2 + 12x - 4ln x attains an absolute maximum and absolute minimum on [1/2,2], and the absolute maximum value is 8 and the absolute minimum value is 0.31.
To verify that the function f(x) = -4x^2 + 12x - 4ln(x) attains an absolute maximum and minimum on the interval [1/2, 2], we will first find its critical points by taking the first derivative and setting it to zero, and then evaluate the function at the critical points and endpoints.

The first derivative of f(x) is:

f'(x) = -8x + 12 - 4/x

Setting f'(x) to zero, we have:

-8x + 12 - 4/x = 0

Multiplying by x to remove the fraction, we get:

-8x^2 + 12x - 4 = 0

Dividing by -4, we have:

2x^2 - 3x + 1 = 0

Factoring, we get:

(x-1)(2x-1) = 0

This gives us the critical points x = 1 and x = 1/2.

Now, we evaluate f(x) at the critical points and endpoints:

f(1/2) = -4(1/2)^2 + 12(1/2) - 4ln(1/2)
f(1) = -4(1)^2 + 12(1) - 4ln(1)
f(2) = -4(2)^2 + 12(2) - 4ln(2)

Calculating these values, we get:

f(1/2) ≈ 5.386
f(1) = 4
f(2) ≈ -4

The absolute maximum value is ≈ 5.386 at x = 1/2, and the absolute minimum value is ≈ -4 at x = 2.

Learn more about polynomial here: brainly.com/question/11536910

#SPJ11

Answer:

Step-by-step explanation:

The statement that correctly describes the solution to this system of equations 4x+2y=6 and 4x+2y=4 is "There is no solutions". The correct option is A.

The given system of equations is 4x + 2y = 6 and 4x + 2y = 4.

On comparing the two equations, we notice that the left-hand side of both the equations is the same. However, the right-hand side of the two equations is different. This implies that the lines represented by the two equations are parallel to each other, since they have the same slope but different y-intercepts.

If two lines are parallel, they will never intersect. In this case, since the two equations represent two parallel lines, there is no point of intersection between them. Therefore, the system of equations has no solution.

Hence, the correct answer is A. There is no solution to this system of equations.

In summary, the given system of equations cannot be satisfied simultaneously, since the lines represented by the two equations are parallel to each other and hence do not intersect. Therefore, the system of equations has no solution.

To know more about equations and solutions, refer to the link below:

https://brainly.com/question/30127282#

#SPJ11

Thus, the value of the angle x for the given angles of value 100 and 112 is found as 36.

An adjacent pair of additional angles is known as a linear pair. Adjacent refers to being next to one another, and supplemental denotes that the sum of the two angles is 180 degrees. As previously said, neighbouring angles are those that are close to one another.

An angle pair that forms a line is known as a "line-ar pair."

For the given triangle:

Using the triangle's angle sum property:

x + (180 - 100) + (180 - 112) = 180

(the other two angles except x are linear pair with the angles of value 100 and 112)

So,

x + 80 + 180 - 112 = 180

x = 112 - 80

x = 32

Thus, the value of the angle x for the given  angles of value 100 and 112 is found as 36.

know more about the linear pair:

https://brainly.com/question/18944511

#SPJ1

Answer:

4/5 or 0.8 Waffles per person

Step-by-step explanation:

Divide the 4 waffles among 5 people, 4/5

0.8 waffle.

We know that the solutions to the quadratic equation are x=21 or x=-12.

To solve the quadratic equation x^2-19x-39=0 using the method of completing the square, the number that would have to be added to "complete the square" is 91.

First, move the constant term to the right side: x^2-19x=39.

Then, take half of the coefficient of x, square it, and add it to both sides: x^2-19x+90.25=129.25.

This can be factored as (x-9.5)^2=129.25.

Taking the square root of both sides, we get x-9.5=±√129.25.

Solving for x, we get x=9.5±√129.25, which simplifies to x=9.5±11.5.

Therefore, the solutions to the quadratic equation are x=21 or x=-12.

To know more about quadratic equation refer here

https://brainly.com/question/17177510#

SPJ11

It is not possible to use n = 10.

It is not possible to use n = 20.

It is possible to use n = 25.

1. The error probabilities for n = 10 are as follows:

- P-value: It is not possible to use n = 10 because there is no value of x which results in a p-value.
- Beta (0.3): B(0.3) > 0.1, which means the probability of failing to reject the null hypothesis (p = 0.1) when the true probability of a leak is actually 0.3 is too high.

Therefore, it is not possible to use n = 10.

2. The error probabilities for n = 20 are as follows:

- P-value: It is not possible to use n = 20 because it results in a beta error probability (B(0.3)) < 0.1, which means the probability of incorrectly rejecting the null hypothesis (p = 0.1) when the true probability of a leak is actually 0.3 is too low.
- Beta (0.3): B(0.3) > 0.1, which means the probability of failing to reject the null hypothesis (p = 0.1) when the true probability of a leak is actually 0.3 is too high.

Therefore, it is not possible to use n = 20.

3. The error probabilities for n = 25 are as follows:

- P-value: P(0.3) < 0.1, which means the probability of incorrectly rejecting the null hypothesis (p = 0.1) when the true probability of a leak is actually 0.3 is low enough to proceed with production.
- Beta (0.3): B(0.3) < 0.1, which means the probability of failing to reject the null hypothesis (p = 0.1) when the true probability of a leak is actually 0.3 is low enough to proceed with production.

Therefore, it is possible to use n = 25.

To learn more about hypothesis, refer below:

https://brainly.com/question/29519577

#SPJ11

1) function g is increasing on all intervals of x.

2) the same is true about both s and t.

3) functions s and g have the same x-intercept.

The phrase "function g is ___ on all intervals of x" refers to the behavior of the function g with respect to its input variable x. If we know that g is increasing on all intervals of x, this means that as we move from left to right along the x-axis, the values of g are increasing. In other words, if we were to plot the graph of g, it would be sloping upwards from left to right.

The phrase "the same is true about ____" is asking us to identify another function that has the same behavior as function g. The options given are both s and t, function s, function t, or neither s nor t. Without any further information about s and t, we cannot definitively say whether they are increasing on all intervals of x like g. Therefore, the correct answer is "both s and t," because this option covers the possibility that either s or t may have the same behavior as g.

The phrase "functions ____ have the same x-intercept" refers to the point(s) where the graph of each function intersects the x-axis. If we know that functions s and g have the same x-intercept, this means that they intersect the x-axis at the same point(s). Therefore, the correct answer is "s and g." However, there is no information given to suggest that function t has the same x-intercept as either s or g, so it is not a correct answer option.

Learn more about function

brainly.com/question/21145944

#SPJ11

1. decreasing

2. function t

3. s and t

4. x

Got it right on Edmentum

The total lease cost for Clayton's SUV is $23,056.24.

Before any additional fees or deposits, the total lease cost is $421.38 per month for 48 months, which equals:

Total cost of the lease  = $421.38/month x 48 months = $20,236.24

Clayton also paid a $2,500 down payment, a $85 title charge, and a $235 license cost in addition to the monthly lease payments.

The entire cost of the lease is $20,236.24 + $2,500 + $85 + $235 = $23,056.24 in total.

Therefore, the total lease cost for Clayton's SUV is $23,056.24.

Learn more about multiply here : brainly.com/question/28773316

#SPJ1

Answer:

Step-by-step explanation:

P(0,7), Q(6,5), R(5,2), and S(-1,4) form the vertices of a rectangle. To prove this, we need to show that the opposite sides of the quadrilateral are parallel and that the diagonals are equal in length and bisect each other.

To explain this solution in more detail, we can start by finding the slopes of the line segments connecting each pair of points. The slope of a line segment can be calculated using the formula:

slope = (change in y) / (change in x)

For example, the slope of the line segment connecting P and Q is:

slope PQ = (5 - 7) / (6 - 0) = -2/6 = -1/3

We can calculate the slopes of the other line segments in a similar way. If the opposite sides of the quadrilateral are parallel, then their slopes must be equal. We can check that this is true for all pairs of opposite sides:

slope PQ = -1/3, slope SR = -1/3

slope QR = (2 - 5) / (5 - 6) = -3/-1 = 3, slope PS = (4 - 7) / (-1 - 0) = -3/-1 = 3

Next, we can calculate the lengths of the diagonals using the distance formula:

distance PR = sqrt[(5 - 0)^2 + (2 - 7)^2] = sqrt(5^2 + (-5)^2) = sqrt(50)

distance QS = sqrt[(6 - (-1))^2 + (5 - 4)^2] = sqrt(7^2 + 1^2) = sqrt(50)

If the diagonals are equal in length, then we should have distance PR = distance QS, which is indeed the case.

Finally, we need to show that the diagonals bisect each other. This means that the midpoint of PR should be the same as the midpoint of QS. We can calculate the midpoint of each diagonal using the midpoint formula:

midpoint of PR = [(0 + 5)/2, (7 + 2)/2] = (2.5, 4.5)

midpoint of QS = [(6 + (-1))/2, (5 + 4)/2] = (2.5, 4.5)

Since the midpoints are the same, we have shown that the diagonals bisect each other.

Therefore, we have shown that the points P(0,7), Q(6,5), R(5,2), and S(-1,4) form the vertices of a rectangle.

To know more about vertices of a rectangle refer here:

https://brainly.com/question/16071215#

#SPJ11

The rate at which the total number of bushels of corn currently increases per year depends on the value of "b", which represents the annual increase in yield per acre. If the yield per acre is not increasing (i.e., b = 0), then the rate of increase is a constant 1300 bushels per year.

Let's call the total number of acres the farmer is farming in corn in a given year as "a". We know that initially, a = 100 acres, and that it increases by 30 acres per year. So, in general:

a = 100 + 30t

where "t" is the number of years since the farmer started converting to corn.

Now, let's call the yield in bushels per acre in a given year as "y". We know that initially, y = 130 bushels per acre, and that it increases by "b" bushels per acre per year. So, in general:

y = 130 + bt

Finally, we can calculate the total number of bushels of corn produced in a given year by multiplying the number of acres by the yield per acre:

bushels per year = a * y

Substituting the expressions we have for "a" and "y", we get:

bushels per year = (100 + 30t) * (130 + bt)

Expanding this expression, we get:

bushels per year = 13000 + 1300t + 3900bt + 30tb

Now we can differentiate this expression with respect to time to find how rapidly the total number of bushels of corn currently increases per year:

d(bushels per year)/dt = 1300 + 3900b + 30b

Simplifying, we get:

d(bushels per year)/dt = 1300 + 3930b

So the rate at which the total number of bushels of corn currently increases per year depends on the value of "b", which represents the annual increase in yield per acre. If the yield per acre is not increasing (i.e., b = 0), then the rate of increase is a constant 1300 bushels per year. If the yield per acre is increasing, then the rate of increase will be greater than 1300 bushels per year, and the rate of increase will depend on the value of "b".

To learn more about bushels of corn visit: https://brainly.com/question/13223409

#SPJ11

To determine how many containers of size 3.7 tons are needed to hold all the gravel from one truck, we need to first calculate how many tons of gravel are in one truck.

Since each truck holds 7.5 cubic yards of gravel, and the weight of one cubic yard of gravel is 1.48 tons, we can calculate the total weight of gravel in one truck as follows:

7.5 cubic yards x 1.48 tons per cubic yard = 11.1 tons

Therefore, each truck carries 11.1 tons of gravel.

To determine how many containers of size 3.7 tons are needed to hold all the gravel from one truck, we can divide the total weight of gravel in one truck by the capacity of each container:

11.1 tons ÷ 3.7 tons per container = 3 containers

Therefore, three containers of size 3.7 tons are needed to hold all the gravel from one truck.

to know more about capacity

brainly.com/question/31196313

#SPJ1