Daniel Isley, working as an internal auditor for Atlantic Insurance Co., most likely uncovered a potential expense reimbursement fraud scheme while reviewing the company's travel and entertainment expenses.
The suspicious indicators he noticed were several receipts from Chase's Restaurant, all with round-dollar amounts just under the company's reimbursement limit. Additionally, the receipts were consecutively numbered but submitted over a six-month period.
This type of scheme usually involves an employee manipulating the expense reimbursement process to gain financial benefits by submitting false or exaggerated claims. In this case, the employee might have either fabricated the receipts or altered them to inflate the amounts. The round-dollar amounts and consecutively numbered receipts raise red flags, as they are unlikely to occur in genuine transactions over an extended period.
As an internal auditor, Isley's responsibility is to investigate further, gather evidence, and, if necessary, report his findings to the appropriate management personnel. This will help Atlantic Insurance Co. address the issue, implement corrective measures, and ensure the integrity of its expense reimbursement system, ultimately safeguarding the company's financial resources.
Learn More about fraud scheme here :-
https://brainly.com/question/31545381
#SPJ11
A toy manufacturing uses 48000 rubber wheels per year for its popular dump truck series. The firm makes its own wheels, which it can can produce at a rate of 800 per day. The toy trucks are assembled uniformly ( at a constant rate ) over the entire year. Carrying cost is $ 1 per wheel per year. setup cost for the production run of the wheel is $ 45. The firm operatyes 240 days per year. Determine each of the following:
a) Optimal manufacturing run size.
b) Resulting total annual cost for carrying inventory and for production setups.
c) Cycle time for the optimal run size.
d) Percentage of the time the wheels manufacturing line is in production mode.
e) Suppose, they have found a way to reduce the inventory carrying cost from $ 1 per wheel per year to $ 0.25 per wheel per year. Would this alter your optimal production lot size and if so, would it go up or down and by how much?
a) The optimal manufacturing run size is 2000 rubber wheels.
b) The resulting total annual cost for carrying inventory and for production setups is $4500.
c) The cycle time for the optimal run size is 2.5 days.
d) The percentage of the time the wheels manufacturing line is in production mode is 33.33%.
e) Yes, the optimal production lot size would change. It would go down to 1414 rubber wheels. This is because the reduced carrying cost means that it is less expensive to hold inventory, so the firm can afford to produce wheels more frequently to meet demand.
To find the optimal run size, we can use the Economic Order Quantity (EOQ) formula:
EOQ = sqrt((2DS)/H)
Where D is the annual demand (48000), S is the setup cost ($45), and H is the carrying cost per unit ($1). Plugging in these values gives us an EOQ of 2000 rubber wheels.
The total annual cost can be calculated using the following formula:
Total annual cost = (DS/Q) + (Q/2)H
Where Q is the order quantity (EOQ), and the first term represents setup costs and the second term represents carrying costs. Plugging in the values gives us a total annual cost of $4500.
The cycle time can be calculated by dividing the number of working days by the number of production runs per year:
Cycle time = Number of working days per year / (Annual demand / EOQ)
Plugging in the values gives us a cycle time of 2.5 days.
The percentage of time in production mode can be calculated by dividing the setup time by the total cycle time:
Percentage in production mode = Setup time / Cycle time
Plugging in the values gives us a percentage of 33.33%.
When the carrying cost is reduced to $0.25 per wheel per year, the new EOQ can be calculated using the same formula as before. Plugging in the new carrying cost gives us an EOQ of 1414 rubber wheels, which is lower than the original EOQ.
This is because the reduced carrying cost means that it is less expensive to hold inventory, so the firm can afford to produce wheels more frequently to meet demand.
For more questions like Demand click the link below:
https://brainly.com/question/29761926
#SPJ11
with so many face creams on the market, skin-joy inc. pays a fee to all of its retailers just to gain store shelf space. this fee is called a(n)
Skin-joy Inc. pays a fee to all of its retailers just to gain store shelf space.
This fee is called a slotting fee. To provide a detailed answer, a slotting fee is a payment made by a manufacturer to a retailer for securing shelf space for its products. It is a common practice in the retail industry where manufacturers pay retailers to display their products on shelves in prominent locations.
This fee is charged to cover the cost of stocking and storing the products and is often used by manufacturers to gain visibility and increase sales. However, it is important to note that slotting fees can be controversial and may lead to anti-competitive behavior in the market.
Learn more about retailers:
brainly.com/question/29509602
#SPJ11
lew is a practicing cpa who decides to raise bonsai as a business. lew engages in the activity and has the following revenue and expenses:Sales $ 5,000Depreciation on greenhouse 10,000Fertilizer, soil, pots 1,500Select either "Yes" or "No" to indicate which of the following are factors the IRS will consider when evaluating whether the activity is a hobby.. Whether the activity is conducted like a business Yes2. The expertise of the taxpayer Yes3. The time and effort expended Yes4. Previous success of the taxpayer in different activities No5. Income and loss history from the activity Yes6. Losses are due to circumstances beyond the taxpayer's control or are normal in the start-up phase Yes7. The taxpayer changes the method of operation to improve profitability Yes8. The dependence on the activity for the taxpayer's income Yes9. Whether a future profit can be expected from the appreciation of the assets used in the activityIf the activity is deemed to be a regular business, what is the amount of Lew's loss from the activity?$6500c. If the activity is deemed to be a hobby, what is the amount of Lew's expenses (if any) from the activity that may be deducted?$ ?????
While Lew is a practicing CPA who decides to raise bonsai as a business, the amount of Lew's expenses that may be deducted is $5,000.
About Lew's bonsai business and the terms "revenue and expenses," "Lew's loss," and "deducted." Let's break down the problem.
Lew's revenue and expenses for the bonsai business are:
Sales: $5,000
Depreciation on greenhouse: $10,000
Fertilizer, soil, pots: $1,500
First, let's determine Lew's loss from the activity if it is deemed to be a regular business. To calculate the loss, subtract the total expenses from the total revenue:
Loss = Revenue - Expenses
Loss = $5,000 - ($10,000 + $1,500)
Loss = $5,000 - $11,500
Loss = -$6,500
If the activity is deemed to be a regular business, Lew's loss from the activity is $6,500.
Now, let's consider if the activity is deemed to be a hobby. If that's the case, Lew can only deduct expenses up to the amount of revenue generated from the hobby. In this scenario, the amount of Lew's expenses that may be deducted is:
Deductible Expenses = Revenue
Deductible Expenses = $5,000
If the activity is deemed to be a hobby, the amount of Lew's expenses that may be deducted is $5,000.
To know more about revenue:
https://brainly.com/question/16232387
#SPJ11
When direct labor costs are recorded in a job costing: Multiple Choice O Factory Wages Payable is debited and Work in Process Inventory is credited.O Work in Process Inventory is debited and Factory Wages Payable is credited. O Cost of Goods Manufactured is debited and Direct Labor is credited. O Direct Labor and Indirect Labor are debited and Factory Wages Payable is credited.O Work in Process Inventory is debited and Factory Overhead is credited.
B: Work in Process Inventory is debited and Factory Wages Payable is credited when direct labor costs are recorded in a job costing system.
When direct labor costs are recorded in a job costing system, Work in Process Inventory is debited and Factory Wages Payable is credited. This is because the direct labor costs are considered a product cost and are added to the cost of the job as it moves through the production process. The credit to Factory Wages Payable represents the liability that the company owes to its employees for the hours worked, which will eventually be paid. This transaction allows the company to track the cost of direct labor for each job and calculate the total cost of goods manufactured.
Option B is answer.
You can learn more about Inventory at
https://brainly.com/question/25947903
#SPJ11
hallie worked 4 weeks during june and averaged 38 hours per week. if her gross pay (before taxes) was $1,801.20, what was her hourly pay rate?
Hallie's hourly pay rate was $11.85.
Total hours worked = average hours per week x number of weeks
Total hours worked = 38 hours/week x 4 weeks = 152 hours
Hourly pay rate = Gross pay / Total hours worked
Hourly pay rate = $1,801.20 / 152 hours
Hourly pay rate = $11.85 per hour
Pay rate is the amount of compensation an employee receives for their work, typically expressed as an hourly wage or an annual salary. In a business context, the pay rate is an important factor in attracting and retaining talented employees, as well as ensuring that employees are fairly compensated for their time and effort.
Pay rates can vary widely depending on a number of factors, including the industry, job function, location, level of experience, and education level of the employee. For example, highly skilled professionals such as doctors or lawyers typically command much higher pay rates than entry-level workers in fields such as retail or hospitality. In addition to the base pay rate, many employers also offer benefits such as health insurance, retirement plans, and paid time off, which can further increase the overall compensation package for employees.
To learn more about Pay rate visit here:
brainly.com/question/13592880
#SPJ4
a lender requires a 1.20 debt coverage ratio as a minimum. if the net operating income of a property is $45,000, what annual amount of debt service would provide the required debt coverage ratio?
The annual amount of debt service required to provide the required debt coverage ratio would either be $37,500 (if there are no existing debt service payments) or $27,500 (if there are existing debt service payments).
To do this, we divide the net operating income (NOI) by the required debt coverage ratio of 1.20:
$45,000 / 1.20 = $37,500
This means that the property has an annual debt service capacity of $37,500.
Next, we subtract any existing debt service payments from this amount to find the additional debt service required to meet the lender's minimum debt coverage ratio.
If the property has no existing debt service payments, then the annual amount of debt service required would simply be $37,500.
However, if there are existing debt service payments, we would subtract them from $37,500 to find the additional debt service required.
For example, if the property has existing debt service payments of $10,000 per year, then the additional debt service required to meet the 1.20 debt coverage ratio would be:
$37,500 - $10,000 = $27,500
Know more about the debt coverage ratio here:
https://brainly.com/question/29347508
#SPJ11
(02. 04 MC)
Trisha receives a $2,500 gift and wants to open a savings account. Which bank interest would be
the best for her at a current inflation rate of 2. 5%?
A nominal interest rate of 3. 5%
O A real interest rate of 3%
A real interest rate of 2. 5%
A nominal interest rate of 4%
The correct option is B, Trisha would want to choose a bank with a real interest rate of 3% or higher to ensure that her savings grow faster than the rate of inflation, which is currently at 2.5%.
Interest rate is the percentage at which an individual or business borrows money from a lender. In the world of business, interest rates play a critical role in determining the cost of borrowing money and the potential return on investment. Businesses typically borrow money to invest in new projects, expand their operations, or cover short-term cash flow needs.
Interest rates can be fixed or variable, meaning they can remain the same throughout the term of the loan or change periodically. The interest rate charged by lenders is often based on factors such as creditworthiness, collateral, and market conditions. Changes in interest rates can have a significant impact on the economy, influencing consumer and business spending, inflation, and employment levels.
To learn more about Interest rate visit here:
brainly.com/question/19756730
#SPJ4
wichita industries' sales are 10% cash and 90% on credit. credit sales are collected as follows: 30% in the month of sale, 40% in the next month, and 30% in the second following month. on december 31, the accounts receivable balance includes $18,000 from november sales and $49,000 from december sales. assume that total sales for january are budgeted to be $56,000. what are the expected cash receipts for january from the current and past sales?
The expected cash receipts for January from the current and past sales are $30,240. It is important for Wichita Industries to manage their cash flow.
Credit sales are collected over three months, with 30% collected in the month of sale, 40% collected in the next month, and the remaining 30% collected in the second following month. As of December 31, Wichita Industries has an accounts receivable balance of $67,000 ($18,000 from November sales and $49,000 from December sales). Since January sales are budgeted to be $56,000, the expected cash receipts for January can be calculated by using the collection percentages for November and December sales and assuming that all January sales will be collected in the same manner. For November sales, 30% was collected in December, so $5,400 was received in cash. The remaining 70% ($12,600) will be collected in January and February, with 40% ($5,040) collected in January and the remaining 30% ($7,560) collected in February. For December sales, 30% was collected in December ($14,700), and 40% will be collected in January ($19,600). The remaining 30% ($14,700) will be collected in February.
learn more about cash receipts here:
https://brainly.com/question/31144903
#SPJ11
the following accounts are from last year's books of sharp manufacturing: raw materials debit credit balance 0 (b) 155,600 (a) 168,000 12,400 work in process debit credit balance 0 (f) 516,400 (b) 132,800 (c) 169,600 (e) 214,000 0 finished goods debit credit balance 0 (g) 468,000 (f) 516,400 48,400 manufacturing overhead debit credit (b) 22,800 (e) 214,000 (c) 26,800 (d) 157,600 6,800 cost of goods sold debit credit (g) 468,000 sharp uses job-order costing and applies manufacturing overhead to jobs based on direct labor costs. what is the amount of direct materials used for the year? multiple choice $169,600 $132,800 $168,000 $155,600
To find the amount of direct materials used for the year, we need to look at the changes in the raw materials account. The beginning balance was 0 and the ending balance was $12,400, so the amount of raw materials used during the year was $12,400.
It's important to note that the other accounts listed (work in process, finished goods, manufacturing overhead, and cost of goods sold) are not relevant to finding the amount of direct materials used. They are all related to the manufacturing process and the cost of producing goods, but they do not directly relate to the amount of raw materials used. Therefore, the answer is (d) $155,600, which is the beginning balance of raw materials subtracted from the ending balance: $155,600 - $0 = $155,600. In summary, Sharp Manufacturing used $155,600 worth of direct materials during the year, based on the information provided in the raw materials account. The account shows a debit of $168,000 (a) and a credit of $155,600 (b), leaving a balance of $12,400. To find the amount of direct materials used, subtract the ending balance from the beginning balance.$168,000 (beginning balance) - $12,400 (ending balance) = $155,600So, the amount of direct materials used for the year is $155,600.
Learn more about materials here
https://brainly.com/question/26245657
#SPJ11
this year, fred and wilma, married filing jointly, sold their home (sales price $750,000; cost $200,000). all closing costs were paid by the buyer. fred and wilma owned and lived in their home for 20 years. how much of the gain is included in gross income? multiple choice $550,000 $300,000 $250,000 $50,000 none of the choices are correct.
$50,000 of the gain is included in gross income.
To determine how much of the gain is included in their gross income, we need to consider the following:
1. Calculate the gain: Sales price ($750,000) - Cost ($200,000) = $550,000
2. Determine the exclusion limit for married filing jointly: $500,000
3. Check the ownership and use tests: Fred and Wilma owned and lived in their home for 20 years, so they meet both tests.
Since Fred and Wilma meet the ownership and use tests, they can exclude up to $500,000 of the gain. Therefore, the amount of the gain included in their gross income is:
Gain ($550,000) - Exclusion limit ($500,000) = $50,000
So, the correct answer is $50,000.
Learn more about gross income here,
https://brainly.com/question/31345654
#SPJ11
the project organization works best when which of the following conditions are satisfied? i. work tasks can be defined with a specific goal and deadline. ii. the job is typical and familiar to the existing organization. iii. the work contains interrelated tasks requiring specialized skills. iv. the project is temporary but unimportant to long-term organizational success. v. the project cuts across organizational lines. none of these conditions need to be satisfied. i, iii, v correct! i, iii, iv, v
The project organization works best when work tasks can be defined with a specific goal and deadline, the work contains interrelated tasks requiring specialized skills, the project cuts across organizational lines, and the project is important to long-term organizational success
The project organization is a type of organizational structure used for managing projects that require a significant amount of resources and effort. It is designed to be temporary, with a specific goal and deadline, and it allows for the efficient allocation of resources and the coordination of activities to ensure the successful completion of the project.
There are several conditions that must be satisfied for the project organization to work best. These conditions include the ability to define work tasks with a specific goal and deadline, the presence of interrelated tasks that require specialized skills, and the project cutting across organizational lines. These conditions allow for the effective management of resources and the coordination of activities across different departments and functions.
In addition to these conditions, it is also important for the project to be important to the long-term organizational success. While the project organization is temporary, its success can have a significant impact on the organization's future performance. Therefore, it is important to ensure that the project is aligned with the organization's goals and priorities.
In summary, the project organization works best when work tasks can be defined with a specific goal and deadline, the work contains interrelated tasks requiring specialized skills, the project cuts across organizational lines, and the project is important to long-term organizational success. These conditions allow for the effective management of resources and the coordination of activities to ensure the successful completion of the project.
For more such questions on project organization
https://brainly.com/question/19954068
#SPJ11
which of the following scenarios are either not accounted for or measured inaccurately by either the income or the expenditure methods of calculating gdp for the united states? check all that apply. the costs of overfishing and other overly intensive uses of resources funds spent by city governments to renovate their buildings the variety of goods available to consumers the value of babysitting services, when the babysitter is paid in cash and the transaction isn't reported to the government
The value of babysitting services, when the babysitter is paid in cash and the transaction isn't reported to the government, is not accounted for or measured inaccurately by either the income or the expenditure methods of calculating GDP for the United States.
This is because GDP only includes economic activities that are recorded and reported to the government. When transactions occur in the informal economy, such as the payment of cash for babysitting services, they are not recorded in official statistics.The costs of overfishing and other overly intensive uses of resources are also not fully accounted for by GDP calculations. While the production of goods and services from these activities is included in GDP, the negative impacts on the environment and future sustainability are not directly measured.Funds spent by city governments to renovate their buildings are accounted for in GDP as government investment. The variety of goods available to consumers is also reflected in GDP through consumer spending on a wide range of goods and services.
Overall, it is important to recognize that GDP is just one measure of economic activity and does not capture all aspects of economic well-being or sustainability. It is important to consider other indicators and measures beyond GDP when assessing the health and progress of an economy.
Learn more about GDP here
https://brainly.com/question/1383956
#SPJ11
if your parents are interested in saving for retirement, which method would you recommend so that they could figure out exactly how long it takes to double their money?
One method that I would recommend for parents who are interested in saving for retirement and want to figure out how long it takes to double their money is the Rule of 72.
The Rule of 72 is a simple formula that allows investors to estimate the number of years it will take for their investment to double in value. To use this rule, investors simply divide 72 by the annual rate of return they expect to earn on their investment. For example, if an investor expects to earn a 6% return on their investment, they would divide 72 by 6, which equals 12. This means that it would take approximately 12 years for their investment to double in value.
Using the Rule of 72 can be a helpful tool for parents who are planning for retirement and want to determine how long it will take for their savings to double. By understanding this rule, parents can make informed decisions about how much they need to save each year and what types of investments to make to reach their retirement goals.
To know more about Savings visit :
https://brainly.com/question/28333145
#SPJ11
consider the table. mother nature tlaloc bob value of sales ($) 3250 8400 20450 dirt ($) 0 3250 0 bricks ($) 0 0 8400 wages ($) 1000 3700 10000 interest payments ($) 1000 600 900 rent ($) 1000 450 500 profits ($) 250 400 650 total expenditure ($) 3250 8400 20450 mother nature produces dirt, tlaloc turns the dirt into brick, and bob creates brick houses. the economy is characterized by the table. note all figures are measured in dollars. what is the value added for mother nature?
question/31755244The value added for Mother Nature can be calculated by subtracting the total expenditure on dirt from the value of sales for Mother Nature. In this case, the value of sales for Mother Nature is $3250 and the expenditure on dirt is $0, so the value added for Mother Nature is $3250.
Value added is the difference between the value of the output and the cost of the intermediate inputs used in the production process. In this case, Mother Nature is providing the input of dirt for free and is able to sell it for a profit. Therefore, the value added for Mother Nature is the full value of the sales of dirt.
It is important to note that value added does not represent the total revenue or income of a company or entity. It only represents the additional value created by the production process. In this example, Mother Nature is not a traditional company or entity, but rather a natural resource that is being utilized in the production process.
Learn More about expenditure here :-
https://brainly.com/question/31497984
#SPJ11
labor supply can be defined as the group of answer choices willingness and ability of people to work specific amounts of time at alternative wage rates in a given period of time, ceteris paribus. total number of individuals who are either employed or actively seeking employment. total number of people who are employable. total number of people in paid employment.
Labor supply refers to the willingness and ability of individuals to work a certain amount of time at different wage rates during a given period of time, assuming that all other factors remain constant (ceteris paribus).
Labor supply would be best defined as the first option: the willingness and ability of people to work specific amounts of time at alternative wage rates in a given period of time, ceteris paribus. This definition takes into account both the willingness and ability of individuals to work, as well as the influence of wage rates on their decision to work. It's important to note that the labor supply is not the same as the total number of individuals who are either employed or actively seeking employment. While these individuals are certainly part of the labor supply, there may be others who are not currently working or looking for work but who could potentially enter the labor market if conditions were favorable.
Similarly, the labor supply is not the same as the total number of people who are employable. While employability is certainly a factor in determining labor supply (since individuals must be able to work in order to supply labor), not all employable individuals will necessarily choose to work at a given wage rate or during a given period of time.
Finally, the labor supply is not the same as the total number of people in paid employment. While those who are currently employed are certainly part of the labor supply, there may be others who are not currently working but who could potentially enter the labor market if conditions were favorable (as mentioned above).
Overall, labor supply is a complex concept that involves a variety of factors, including individual preferences, labor market conditions, and wage rates. I hope this long answer helps to clarify the definition of labor supply for you!
Learn more about labor supply
https://brainly.com/question/14839696
#SPJ11
average annual net income divided by the average investment amount is another method of computing: a) present value. b) unadjusted rate of return c) budget variance. d) none of these is correct.
The correct answer is b) unadjusted rate of return. This method is also known as the simple rate of return or accounting rate of return.
It is a basic way to measure the profitability of an investment by dividing the average annual net income (after taxes and depreciation) by the average investment amount (total initial investment plus any additional investments or improvements made over the investment's useful life). The resulting percentage represents the average annual return on investment. However, this method does not take into account the time value of money or the duration of the investment, making it less accurate than other methods like the discounted cash flow or internal rate of return.
To know more about depreciation:
https://brainly.com/question/17827672
#SPJ11
true or false: the cost of preferred stock is not a source of long-term capital financing and should be excluded from a wacc calculation.
False. The cost of preferred stock is a source of long-term capital financing and should be included in a WACC (Weighted Average Cost of Capital) calculation.
The cost of preferred stock represents the return that investors require for investing in the company's preferred shares, which is a long-term source of capital. Therefore, it is an important component of a company's WACC calculation, which is used to determine the overall cost of financing the company's operations.
The cost of preferred stock is typically higher than the cost of debt, but lower than the cost of equity, making it an important consideration in the capital structure of a company.
Learn more about WACC (Weighted Average Cost of Capital):
brainly.com/question/30746642
#SPJ11
which of the following is (are) required to calculate the predetermined manufacturing overhead rate? group of answer choices none of the factors listed are required estimated allocation base/cost driver all 3 factors listed are required estimated fixed moh estimated variable moh
To calculate the predetermined manufacturing overhead rate, all three factors listed are required. This includes the estimated allocation base/cost driver, estimated fixed MOH, and estimated variable MOH.
A detailed answer would explain that the predetermined manufacturing overhead rate is used to allocate overhead costs to products or services, and is calculated by dividing the estimated total manufacturing overhead costs for the period by the estimated total allocation base/cost driver. The estimated fixed MOH and estimated variable MOH are included in the total manufacturing overhead costs, making them necessary components of the calculation. Overall, a long answer would provide more in-depth information on the importance of accurate estimates and how the predetermined manufacturing overhead rate impacts product costing.
So, the correct answer is "all 3 factors listed are required." Here is a step-by-step explanation:
1. Calculate the total estimated manufacturing overhead by adding the estimated fixed MOH and estimated variable MOH.
2. Identify the appropriate allocation base/cost driver (such as direct labor hours, machine hours, or direct labor costs).
3. Divide the total estimated manufacturing overhead by the estimated allocation base/cost driver to obtain the predetermined manufacturing overhead rate.
Using all three factors will ensure an accurate calculation of the predetermined manufacturing overhead rate.
Learn more about overheads
https://brainly.com/question/29037936
#SPJ11
higher inflation makes relative prices question 13 options: more variable, making it more likely that resources will be allocated to their best use. more variable, making it less likely that resources will be allocated to their best use. less variable, making it more likely that resources will be allocated to their best use. less variable, making it less likely that resources will be allocated to their best use.
The correct answer is: Higher inflation makes relative prices more variable, making it less likely that resources will be allocated to their best use.
1. Higher inflation leads to a general increase in prices across the economy.
2. This price increase can cause relative prices (the price of one good or service compared to another) to become more variable, as different goods and services may experience different inflation rates.
3. When relative prices become more variable, it becomes more difficult for individuals and businesses to make accurate decisions about resource allocation.
4. As a result, resources may not be allocated to their most efficient and productive uses, leading to a less optimal allocation of resources in the economy.
In summary, higher inflation can negatively impact resource allocation by making relative prices more variable and less predictable, reducing the likelihood of resources being directed towards their best use.
For more questions on Inflation
https://brainly.com/question/1082634
#SPJ11
which of the following would be included in the u.s. financial account? a a computer made in britain imported into the united states b the value of a bond of a company in the united states sold to someone living in britain c wages paid by a company in the united states to an employee living in britain. d interest on a u.s. company's bond sold to someone living overseas e a computer made in the u.s. exported to britain
Option A and E would be included in the U.S. financial account.
The U.S. financial account is a component of the balance of payments that tracks international capital flows into and out of the United States. It includes transactions involving U.S. assets and liabilities, such as stocks, bonds, and direct investment. Option A would be included because it represents an import of a physical good, which is considered a financial transaction in the balance of payments. Option E would also be included because it represents an export of a physical good. Options B and D would be included in the capital account, which is another component of the balance of payments that tracks non-financial transactions such as transfers of assets between residents and non-residents. Option C would not be included in either the financial or capital account because it represents a wage payment, which is not considered a financial or capital transaction.
Learn more about U.S. financial account here:
https://brainly.com/question/29884824
#SPJ11
roll-forward work normally occurs between the ____ and the ____.
Roll-forward work normally occurs between the interim audit date and the final audit date.
In a financial audit, the interim audit date is when auditors perform certain audit procedures, often focusing on specific accounts or transactions, at a point during the fiscal year, before the final audit date. The final audit date is when auditors complete their work and finalize the audit report after the fiscal year-end.
Roll-forward work is a procedure that auditors use to update the information gathered during the interim audit to the final audit date. This process helps auditors ensure that the financial statements are accurate and complete as of the year-end. Roll-forward work is an important part of the audit process, as it helps auditors identify any potential errors or inconsistencies and ensures that the financial statements are in compliance with accounting standards and regulations.
To perform roll-forward work, auditors usually review transactions and account balances, perform additional tests and confirmations, and update their risk assessments and conclusions accordingly.
Learn more about Roll-forward:
https://brainly.com/question/30452388
#SPJ11
demand would most likely be inelastic for which of the following?group of answer choicesgourmet cheeseluxury watcheslamb chops and t-bone steaksbasic necessitiessymphony tickets
Inelastic demand refers to a situation where a change in price does not significantly affect the quantity demanded.
Demand is considered inelastic when changes in price do not have a significant impact on the quantity demanded. Basic necessities, such as food and housing, are essential for survival and consumers will still need to purchase these goods even if the price increases.
Basic necessities, such as food, water, and shelter, are essential for people's survival and well-being. Therefore, regardless of price fluctuations, people will still need and consume these basic necessities, making the demand for them inelastic.
To know more about Inelastic demand visit:-
https://brainly.com/question/17516720
#SPJ11
which is conducted by the project manager involves determining if the information system makes sense
The process conducted by the project manager to determine if the information system makes sense is called feasibility analysis. Feasibility analysis is a crucial step in the development of an information system that helps in assessing the viability and suitability of the system before proceeding with its implementation.
To further explain, feasibility analysis is a comprehensive evaluation of the proposed information system to assess its technical, operational, economic, and scheduling feasibility. The project manager must determine if the system is technically feasible, i.e., whether it can be developed using existing technology and resources. Operational feasibility involves analyzing whether the system aligns with the organizational goals and requirements, whether it is user-friendly, and whether it can be integrated with the existing systems.
Economic feasibility involves estimating the cost and benefit of the system, including the return on investment, while scheduling feasibility evaluates whether the project can be completed within the stipulated time frame. By conducting feasibility analysis, the project manager can determine if the information system makes sense and if it is worth investing in.
To know more about feasibility analysis refer to
https://brainly.com/question/15205486
#SPJ11
John Wilkes, a self-employed consultant near Miami, receives an invitation to consult with a client in San Francisco and another client in Chicago. He decides to combine his visits, traveling from Miami to San Francisco, San Francisco to Chicago, and Chicago to Miami.
Wilkes wonders how he should allocate his travel costs between the two clients. He has collected the following data for regular round-trip fares with no stopovers:
Miami to San Francisco $450 Miami to Chicago $300
Wilkes paid $600 for his three-leg flight (Miami–San Francisco, San Francisco–Chicago, Chicago–Miami).
Required
1. How should Wilkes allocate the $600 airfare between the clients in San Francisco and Chicago using (a) the stand-alone cost-allocation method, (b) the incremental cost-allocation method, and (c) the Shapley value method?
2. Which method would you recommend Wilkes use and why?
Based on the three methods, I would recommend that Wilkes use the incremental cost-allocation method. The incremental cost-allocation method provides a straightforward and fair way to allocate the costs based on the incremental impact of each client on the total cost.
(a) Stand-alone cost-allocation method: Under this method, Wilkes would allocate the travel costs based on the stand-alone cost of each leg of the journey. Thus, the cost of the Miami–San Francisco leg would be allocated entirely to the San Francisco client, and the cost of the San Francisco–Chicago and Chicago–Miami legs would be allocated entirely to the Chicago client. Therefore, the San Francisco client would be allocated $450, and the Chicago client would be allocated $150 each.
(b) Incremental cost-allocation method: Under this method, Wilkes would allocate the travel costs based on the incremental cost of adding a client to the itinerary. The cost of the Miami–San Francisco leg would be allocated entirely to the San Francisco client. Since Wilkes would have flown from San Francisco to Chicago regardless of whether the Chicago client was added to the itinerary, the entire cost of the San Francisco–Chicago leg would be allocated to the San Francisco client. The San Francisco client would be allocated $450, and the Chicago client would be allocated $150.
(c) Shapley value method: Under this method, Wilkes would allocate the travel costs based on the average marginal contribution of each client to the overall cost. The Shapley value method is a bit more complicated, but in this case, it would result in the San Francisco client being allocated $429, and the Chicago client being allocated $171.
The stand-alone method does not take into account the fact that Wilkes would have flown from San Francisco to Chicago regardless of whether the Chicago client was added to the itinerary. The Shapley value method is more complicated, and in this case, the differences in allocation are not significant enough to justify the added complexity.
Learn more about cost-allocation here:
https://brainly.com/question/13864455
#SPJ4
the equipment was purchased for $240,000 and the partnership has taken $60,000 of depreciation. the stock was purchased seven years ago. what is franklin's overall gain or loss on the sale of his partnership interest?
Franklin's overall gain or loss on the sale of his partnership interest depends on the current value of the partnership and the value of the equipment. In this scenario, assuming no liabilities, Franklin would gain $220,000.
To determine Franklin's overall gain or loss on the sale of his partnership interest, we need to consider a few factors. Firstly, we need to determine the current value of the equipment. Assuming the equipment has a useful life of 10 years, and it was purchased seven years ago, we can estimate its current value to be around $120,000 ($240,000/10 years x 3 years).
Next, we need to subtract the accumulated depreciation of $60,000 from the current value of the equipment, which gives us a net book value of $60,000.
Now, let's assume that Franklin owns a 20% stake in the partnership, and the total value of the partnership is $1 million. This means that Franklin's share in the partnership is $200,000.
If Franklin sells his 20% stake in the partnership, he will receive $200,000. However, he will also need to factor in the value of the equipment. Since the net book value of the equipment is $60,000, this means that the equipment is worth $60,000 less than its original purchase price. Therefore, the partnership will receive $180,000 for the equipment.
To calculate Franklin's overall gain or loss, we need to subtract his share of the partnership's liabilities from the sale proceeds. If we assume that the partnership has no liabilities, Franklin's overall gain on the sale of his partnership interest would be $220,000 ($200,000 + $20,000).
For more such questions on, partnership :
https://brainly.com/question/14918323
#SPJ11
web-based demonstrations can be an effective way to present when it is: group of answer choices imperative that a customer see a full product demonstration important to meet face-to-face important to impress the buyer with technology necessary to provide factual data and research impossible or expensive to present in person
Web-based demonstrations can be a highly effective way to present products or services to customers, especially when it is impossible or expensive to present in person. This approach utilizes technology to provide a virtual demonstration that can be accessed remotely, making it highly convenient for both the presenter and the customer.
By leveraging the capabilities of web-based technology, presenters can provide factual data and research, as well as an immersive experience that can help to impress buyers and showcase the benefits of the product or service.
While face-to-face meetings are still important for building relationships and establishing trust, web-based demonstrations can be just as effective in many cases. In situations where it is imperative that a customer sees a full product demonstration, but cannot be present in person, web-based demos can be a valuable alternative. This is particularly true for companies that operate in industries where remote work or virtual collaboration is becoming increasingly common.
In summary, web-based demonstrations are a powerful tool for presenting products and services to customers, especially when it is impossible or expensive to present in person. By leveraging technology to provide an immersive and informative experience, presenters can impress buyers, provide factual data and research, and ultimately drive sales.
To know more about Web-based demonstrations visit:
https://brainly.com/question/15870714
#SPJ11
Elaborate the concept of ""Risk"" in the study of FBPO course
In the FBPO (Finance for Business Process Outsourcing) course, risk can be defined as the potential for loss or damage to a business process outsourcing (BPO) company's financial, operational, or reputational standing.
Business Process Outsourcing (BPO) is a strategy that allows companies to outsource their non-core business processes to external service providers. These processes can include tasks such as payroll, human resources, customer support, accounting, and other administrative functions. The primary goal of BPO is to allow companies to focus on their core business functions and improve efficiency, while the external service provider handles the non-core tasks.
This can lead to cost savings, improved quality, and increased productivity. BPO is typically utilized by companies that lack the resources or expertise to perform certain tasks in-house or those that want to improve their operational efficiency by outsourcing to specialized service providers. The service providers can be located domestically or internationally, depending on the needs of the company.
To learn more about Business process outsourcing (BPO) visit here:
brainly.com/question/18559165
#SPJ4
Your boss hands you the following information for a pair of mutually exclusive projects and asks for your recommendation. What should you do?Project A B Cost of Capital 14% 14% IRR 26% 25% Year 0 - $10,000 - $10,000 Cash Flows Year 1 Year 2 $9000 $3000 $2500 $6000 Year 3 $2000 $8000 should be selected The NPV of project Ais $, and the NPV of project B is $. Using the NPV rule, project (Round to two decimal places as needed.)
Based on the NPV rule, Project A should be selected as it has a higher NPV of $4,584.79 compared to Project B's NPV of $4,383.56.
The NPV rule states that a project should be accepted if its NPV is positive and rejected if its NPV is negative. In this case, both projects have a positive NPV, indicating that they are both financially feasible.
However, Project A has a higher NPV, which means it will generate more value for the company than Project B. Therefore, based on the NPV rule, Project A should be selected. It's important to note that the decision should also consider non-financial factors such as strategic fit, risk, and operational feasibility.
For more questions like Project click the link below:
https://brainly.com/question/30407333
#SPJ11
if an accounting firm wishes to perform audits for publicly traded companies, it must - group of answer choices
To perform audits for publicly traded companies, an accounting firm must obtain a license, maintain independence, hire qualified staff, follow auditing standards, and submit to regulatory oversight.
Assuming a bookkeeping firm wishes to perform reviews for public corporations, it should consent to a few administrative necessities. Coming up next are a portion of the key advances that a bookkeeping firm should follow:
Get a permit: The bookkeeping firm should get a permit to rehearse from the pertinent administrative power, for example, the Public Organization Bookkeeping Oversight Board (PCAOB) in the US.
Meet autonomy prerequisites: The bookkeeping firm should keep up with freedom from the organizations it reviews. This implies that the firm can't have any monetary or business associations with the organization past the extent of the review.
Enlist qualified staff: The bookkeeping firm should recruit staff who are qualified and experienced in evaluating public corporations. This incorporates affirmed public bookkeepers (CPAs) and different experts with pertinent mastery.
Observe reviewing guidelines: The bookkeeping firm should keep the inspecting guidelines set by the administrative power. For instance, in the US, examiners should keep the For the most part Acknowledged Reviewing Guidelines (GAAS) and PCAOB norms.
Submit to administrative oversight: The bookkeeping firm should submit to administrative oversight by the pertinent power. This incorporates permitting the administrative power to examine its review work and research any protests or worries about its inspecting rehearses.
To learn more about accounting firm, refer:
https://brainly.com/question/28127387
#SPJ4
The complete question is:
What are the requirements that an accounting firm must comply with to perform audits for publicly traded companies? List some of the key steps they must follow.
the ratio that is calculated by dividing net income by average total assets is referred to as:
The ratio that is calculated by dividing net income by average total assets is referred to as Return on Assets (ROA).
Return on Assets (ROA) is a financial performance ratio that measures the profitability of a company in relation to its total assets. It is calculated by dividing the net income of a company by its total assets. ROA provides an indication of how efficiently a company is using its assets to generate profit.
A high ROA indicates that a company is generating more profit per dollar of assets, which is generally considered a positive sign for investors. On the other hand, a low ROA indicates that a company is not utilizing its assets efficiently and may need to improve its operations. ROA is useful for comparing the financial performance of companies within the same industry or sector. It can also be used to track a company's performance over time and identify trends in its profitability.
To learn more about Return on Assets visit here:
brainly.com/question/30403922
#SPJ4