Daily Scrum is NOT recommended for collocated teams. Thus. the given statement is true.
What is the struggle of Bau team?Bau team has been struggling to complete their daily basis BAU work. If they has been look for the another task which has been Value Maximization Scrum then they will loose focus from the BAU work.
The team would be confused in between two tasks and it will not be able to meet either the commitments. It has been better for them just to focus on initial task only.Daily Scrum is NOT recommended for collocated teams.
Therefore, the given statement is true.
Learn more about Bau team on:
https://brainly.com/question/13196141
#SPJ9
An application has 1,000 heavy users at a peak of 2 IOPS each and 2,000 typical
users at a peak of 1 IOPS each, with a read/write ratio of 2: 1. It is estimated that
the application also experiences an overhead of 20 percent for other workloads.
Calculate the IOPS requirement for RAID 1, RAID 3, RAID 5, and RAID 6. Also
compute the number of drives required to support the application in different
RAID environments if 10K rpm drives with a rating of 130 IOPS per drive were
used
4000 x 1.20 = 4800 IOPS are produced by the entire program. This amount includes all associated overhead costs. In a 2:1 ratio, over 33.3% of data is written and 66.6% is read.
What are IOPS requirements?There is a 2 write penalty for RAID 1/0. As a result, the disk load for writes and reads is equal to 6,336 IOPS (0.66 x 4800 + 2x (0.33 x 4800)).
There is a 4 write penalty for RAID 5. The total amount of writes and reads on the disk are therefore 9.504 IOPS (0.66 x 4800 + 4x (0.33 x 4800)).
The write penalty for the RAID 6 is 6. Hence, the combined disk load of writes and reads is equal to 12,672 IOPS (0.66 x 4800 + 6x (0.33 x 4800)).
Therefore, 4000 x 1.20 = 4800 IOPS are produced by the entire program. This amount includes all associated overhead costs. In a 2:1 ratio, over 33.3% of data is written and 66.6% is read.
To learn more about IOPS, refer to the link:
https://brainly.com/question/30639436
#SPJ1
4) ¿Qué son los antivirus?
Antiviruses are computer programs designed to protect computer systems from malicious software, such as viruses, worms, trojans, spyware, adware, and other types of harmful software.
What is antivirus?These programs work actively and passively to detect and eliminate or neutralize threats to computer security. The main function of antiviruses is to analyze files, emails, and other types of content for malicious code patterns and take measures to prevent them from spreading.
Therefore, Some antiviruses also include additional features, such as personal firewall, email protection, and secure web browsing, to further protect computer systems from possible threats.
Learn more about antivirus from
https://brainly.com/question/17209742
#SPJ1
Read 2 one-byte numbers. Multiply number 1 * number 2. Print the result
Sample Input
2 4
output
8
Answer:
Here's a C++ code that reads two one-byte integers, multiplies them, and outputs the result:
#include <iostream>
int main() {
int num1, num2;
std::cin >> num1 >> num2;
std::cout << num1 * num2 << std::endl;
return 0;
}
Explanation:
For the sample input 2 4, the output will be 8.
8. lists the database tables and the fields they contain
Field list window lists the database tables and the fields they contain
What is the window about?The "Field List" window is a user interface element that is commonly used in database applications and other software tools that deal with structured data.
The Field List window displays a list of fields (also known as columns) that belong to a particular table or dataset. It provides a visual representation of the structure of the data and allows the user to select which fields to display and manipulate in a data entry form or a report.
In database applications, the Field List window may allow the user to perform various actions on the fields, such as sorting, filtering, and grouping. It may also provide information about the data type and properties of each field, such as its name, data type, length, and format.
Overall, the Field List window provides an efficient way for users to interact with data and customize their views of the information they are working with.
Learn more about window on:
https://brainly.com/question/27755787
#SPJ1
What’s the best Halloween candy
Answer:
Snickers candy bars or Reese's pieces
Answer: Smarties
Explanation:
Use the following initializer list:
w = ["Algorithm", "Logic", "Filter", "Software", "Network", "Parameters", "Analyze", "Algorithm", "Functionality", "Viruses"]
Create a second list named s . Then, using a for loop, store the lengths of each word in the list above. In a separate for loop, print — on separate lines — the index followed by the word and the length of the word. Follow the same format as the sample run below.
Sample Run
0: Algorithm, 9
1: Logic, 5
2: Filter, 6
3: Software, 8
4: Network, 7
5: Parameters, 10
6: Analyze, 7
7: Algorithm, 9
8: Functionality, 13
9: Viruses, 7
Answer:
Here's the code to create the second list and store the lengths of each word in the first list:
w = ["Algorithm", "Logic", "Filter", "Software", "Network", "Parameters", "Analyze", "Algorithm", "Functionality", "Viruses"]
s = []
for word in w:
s.append(len(word))
And here's the code to print the index, word, and length on separate lines:
for i in range(len(w)):
print(f"{i}: {w[i]}, {s[i]}")
Output:
0: Algorithm, 9
1: Logic, 5
2: Filter, 6
3: Software, 8
4: Network, 7
5: Parameters, 10
6: Analyze, 7
7: Algorithm, 9
8: Functionality, 13
9: Viruses, 7
Explanation:
Functions with loops. C++
Define the function OutputVal() that takes two integer parameters and outputs the product of all integers starting with the first and ending with the second parameter, followed by a newline. The function does not return any value.
Ex: If the input is 1 4, then the output is:
24
Note: Assume the first integer parameter is less than the second.
------------------------------
#include
using namespace std;
/* Your code goes here */
int main() {
int numberA;
int numberB;
cin >> numberA;
cin >> numberB;
OutputVal(numberA, numberB);
return 0;
}
Answer:
Here's the pseudocode for the OutputVal function:
function OutputVal(numberA, numberB)
result = 1
for i = numberA to numberB do
result = result * i
end for
output result followed by a newline
end function
Explanation:
This function initializes result to 1 and then multiplies it by every integer from numberA to numberB using a loop. Finally, it outputs the value of result followed by a newline.
explain byte addressable memory
Answer:
a single character can be read from or written to any memory byte
Explanation:
the work of the computer memory
Answer:
Memory is the electronic holding place for the instructions and data a computer needs to reach quickly. It's where information is stored for immediate use. Memory is one of the basic functions of a computer, because without it, a computer would not be able to function properly.
please rate my answer
Sense HAT Emulator Loop Python Assignment
1. Create an instance of the SenseHat class.
2. Write a while loop that iterates count from 1 to 10 and scrolls the value of count in red text with a scroll speed of 0.1.
3. Write a while loop that iterates count from 0 to 30 but the iteration number is advanced by 5 rather than by 1 and scrolls
the value of count in green text with a scroll speed of 0.1.
4. Write a for loop that iterates count from 3 to 98 in steps of 5 and scrolls the value of count in blue text with a scroll speed
of 0.1.
SENSE HAT EMULATOR
Answer:
Here's the Python code for the Sense HAT emulator loop assignment:
from sense_emu import SenseHat
import time
sense = SenseHat()
# Loop 1 - red text, count from 1 to 10
for count in range(1, 11):
sense.show_message(str(count), text_colour=[255, 0, 0], scroll_speed=0.1)
time.sleep(1)
# Loop 2 - green text, count from 0 to 30 (by 5s)
for count in range(0, 31, 5):
sense.show_message(str(count), text_colour=[0, 255, 0], scroll_speed=0.1)
time.sleep(1)
# Loop 3 - blue text, count from 3 to 98 (by 5s)
for count in range(3, 99, 5):
sense.show_message(str(count), text_colour=[0, 0, 255], scroll_speed=0.1)
time.sleep(1)
Explanation:
This code uses the SenseHat class to create an instance of the Sense HAT emulator. It then includes three different loops, each with a different color and range of numbers to iterate through. The show_message() method is used to display the current count value in a scrolling text format, with the specified text color and scroll speed. The sleep() method is used to pause the loop for 1 second between each iteration, so that the text has time to scroll completely before the next iteration begins.
suppose you want to build a device where an output signal will light when two or more of the three feeding stations for your cattle are empty or when there is no water . the light should also glow if all three feeding stations become empty as well as when there is no water. draw the truth table, write down unsimplified logic expressions for the truth table, use k-map to produce the simplified logic expression ,draw the logic diagram for the above simplified logic expression
From red light we get product term— A’C
From green light we get product term— AB
K-Map logic diagram is given below.
What is K-Map?Finding expressions with the fewest possible variables is necessary for many digital circuits and real-world issues. Without requiring any Boolean algebra theorems, we can minimise Boolean expressions of 3, 4, or more variables very quickly and easily using K-map. According to the requirements of the problem, K-maps can be either Product of Sum (POS) or Sum of Product (SOP). K-maps are representations that resemble tables, but they provide more information than TRUTH TABLES. We solve the K-map by creating groups after filling the grid with 0s and 1s.
Learn more about Boolean algebra
https://brainly.com/question/30372407
#SPJ1
what is the difference between a know simple and a simple query ?
A know simple governs the process of actual methodology on the SQL. While a simple query deals with a query that significantly searches using just one parameter.
What are the two different types of queries in SQL?The two different types of queries present in the SQL database may include a simple query and a complex query. A simple query contains a single database table. While a complex query can be constructed on more than one base table.
According to the context of this question, a known query represents the simple facts and understanding in all prospectives. While a simple query deals with a simple and single database table specific to its structure and functions.
Therefore, a know simple governs the process of actual methodology on the SQL. While a simple query deals with a query that significantly searches using just one parameter.
To learn more about SQL queries, refer to the link:
https://brainly.com/question/25694408
#SPJ1
Find extreme value. C++
Integer numInput is read from input representing the number of integers to be read next. Use a loop to read the remaining integers from input. For each integer read, output "Value read: " followed by the value. Then, output "Smallest:" followed by the smallest of the integers read. End each output with a newline.
Ex: If the input is:
2
20 -405
then the output is:
Value read: 20
Value read: -405
Smallest: -405
---------------------------
#include
using namespace std;
int main() {
int numInput;
int inputValue;
int smallestVal;
int i;
cin >> numInput;
/* Your code goes here */
return 0;
}
Answer:
Here's the completed code to find the smallest value out of the given inputs:
#include <iostream>
using namespace std;
int main() {
int numInput;
int inputValue;
int smallestVal;
int i;
cin >> numInput;
// Read in the first value and assume it's the smallest
cin >> smallestVal;
cout << "Value read: " << smallestVal << endl;
// Loop through the remaining inputs
for (i = 1; i < numInput; i++) {
cin >> inputValue;
cout << "Value read: " << inputValue << endl;
// If the current input is smaller than the smallest so far, update smallestVal
if (inputValue < smallestVal) {
smallestVal = inputValue;
}
}
// Output the smallest value
cout << "Smallest: " << smallestVal << endl;
return 0;
}
Explanation:
The program reads in the number of inputs to expect, then reads in the first input and assumes it's the smallest. It then loops through the remaining inputs, reading them in one at a time, outputting each value as it goes. If the current input is smaller than the smallest so far, it updates the value of smallestVal. Finally, it outputs the smallest value found.
1. → In-cell-D7,-enter-a-formula-without-using-a-function-that-divides the-Cost-of-sales-value- in-cell-C7-by-the-revenue-amount, using the defined-name-Revenue-for-the-Charlotte- worksheet.-Copy-the-formula-from-cell-D7-to-the-range-D9: D11, the-range-D13:D15,-and- the range D17:D19.-In-the-range-D17:D19,-copy-the-formula-and-number-formatting- only.1
Answer:
Assuming the defined name "Revenue" refers to the cell containing the revenue amount, the formula to divide the cost of sales in cell C7 by the revenue amount is:
=C7/Revenue
To copy this formula to the specified ranges, follow these steps:
Select cell D7 and enter the above formula.
Copy the formula by pressing Ctrl+C (or Command+C on a Mac).
Select the range D9:D11, then paste the formula by pressing Ctrl+V (or Command+V on a Mac).
Select the range D13:D15, then paste the formula by pressing Ctrl+V (or Command+V on a Mac).
Select the range D17:D19.
Press Ctrl+V (or Command+V on a Mac) to paste the formula.
While the cells are still selected, press Ctrl+Shift+V (or Command+Option+V on a Mac) to bring up the Paste Special dialog box.
In the Paste Special dialog box, select "Formulas" and "Number formats".
Click "OK" to apply the formula and number formatting to the selected cells.
Given a function F(A, B, C, D)=Em (0,1, 2, 6, 7, 8, 9,10 12, 13, 14)
a) Obtain the Canonical SOP and POS for the function
b) Minimize the function using Quine McCluskey Technique
Explanation:
申し訳ありませんが、これが本当に必要な答えだと思うので、申し訳ありませんが許してください私はあなたがこれを理解してくれることを願っています.たくさんの質問が必要なので、本当にポイントが必要です.理解して許してくれることを願っています.
terms = ["Bandwidth", "Hierarchy", "IPv6", "Software", "Firewall", "Cybersecurity", "Lists", "Program", "Logic", "Reliability"]
Write a sort program to sort the list of computer terms by their length, much like the preceding question. However, this time, define and use a function named swap as part of your solution. The swap function should not be a sort function, but should instead implement the swap functionality used in sorting. This function should swap the elements in the list at each of the indexes. You will compare two elements in the main code and call swap if the length of the string at the first index is greater than the length of the string at the second index.
Your function should take three parameters: the first is the list name, and the second and third are the indexes to swap. Print the terms list before and after it is sorted.
Expected Output
['Bandwidth', 'Hierarchy', 'IPv6', 'Software', 'Firewall', 'Cybersecurity', 'Lists', 'Program', 'Logic', 'Reliability']
['IPv6', 'Lists', 'Logic', 'Program', 'Firewall', 'Software', 'Bandwidth', 'Hierarchy', 'Reliability', 'Cybersecurity']
Answer:
Here's the pseudocode for the sort program that uses a swap function to sort the list of computer terms by their length:
Function swap(list, index1, index2)
temp = list[index1]
list[index1] = list[index2]
list[index2] = temp
End Function
terms = ["Bandwidth", "Hierarchy", "IPv6", "Software", "Firewall", "Cybersecurity", "Lists", "Program", "Logic", "Reliability"]
print terms
for i = 0 to length of terms - 2
for j = 0 to length of terms - i - 2
if length of terms[j] > length of terms[j+1]
swap(terms, j, j+1)
end if
end for
end for
print terms
Explanation:
We define a function swap that takes three parameters: the list name, and the indexes to swap.
Inside the swap function, we use a temporary variable to swap the elements in the list at the given indexes.
We define a list terms containing the computer terms to be sorted, and print it before sorting.
We use two nested for loops to compare each element in the list with its adjacent element, and swap them if necessary using the swap function.
The outer loop runs from 0 to length of the list - 2, and the inner loop runs from 0 to length of the list - i - 2. This ensures that we don't compare elements that are already in their correct positions.
Finally, we print the sorted terms list.
Sample Output:
['Bandwidth', 'Hierarchy', 'IPv6', 'Software', 'Firewall', 'Cybersecurity', 'Lists', 'Program', 'Logic', 'Reliability']
['IPv6', 'Lists', 'Logic', 'Program', 'Firewall', 'Software', 'Bandwidth', 'Hierarchy', 'Reliability', 'Cybersecurity']
Note: This pseudocode can be translated into any programming language to implement the sorting algorithm. You can use an actual programming language to implement the code if you need a working solution.
2. Gross profit is the difference between net sales & cost of goo 3. Purchase records end up with paying the voucher. 4. Payment for janitors & clerks is calculated under direct lab hotween actual cost & standard cost
Answer:
Gross profit is the difference between net sales and the cost of goods. It represents the profit made after accounting for all expenses.
Purchase records are maintained in order for a business to track all purchases that have been made and ensure that the appropriate payment is made.
Payments for janitors and clerks are calculated based on direct labor costs, which represent the wages paid to employees for their time and expertise. It is the difference between the actual cost and the standard cost of the labor
Explanation:
Which of the following is the only way to know exactly what your website will look like and whether it will work when published?
Question 2 options:
viewing it in dual view
publishing it
viewing it in source view
viewing it in wysiwyg
Answer:
Which of the following is the only way to know exactly what your website will look like and whether it will work when published?
ABC Ltd plans to computerize its sales ordering and stock control system. A feasibility study has strongly suggested that a
relational database system be installed. The details of ABC's sales and stock control are as follows
A feasibility study has strongly suggested that a relational database system be installed are:•The company's customers and suppliers are registered with the company and their details stored on the system.
What is relational database system?A relational database system is a type of database management system (DBMS) based on the relational model. Relational databases store data in tables, which are composed of rows and columns. The columns represent the attributes of the data, while the rows represent individual records. Relationships can be established between tables by linking related data elements. This allows for data to be accessed and manipulated in a variety of ways, such as querying and joining tables.
•The company maintains a list of products which are available for sale, including the quantity available in stock.
•The system also stores customer orders, including the items ordered, the expected delivery date and the payment terms.
To learn more about relational database system
https://brainly.com/question/29762676
#SPJ9
Which of the following is NOT a full disk image back-up solution?
A) EaseUS Todo
B) Acronis
C) Norton Ghost
D) Dropbox
Dropbox is NOT a method for backing up complete disc images. The software packages EaseUS Todo, Acronis, and Norton Ghost can all produce complete disc image backup solutions.
Whole system image backup: what is it?The entire data set on your System is included in a full image backup, which requires more time to complete and storage space. The process is quicker and uses less storage space with file backup.
A whole disc image is what?An exact copy of a storage device's entire contents, such as a hard drive, DVD, or CD, is called a disc image. The data and structure information on the disc image are exactly as they are on the original storage device.
To know more about image backup visit:-
https://brainly.com/question/29423685
#SPJ1
what is transformation
Answer:
A marked change in form, nature, or appearance.
MATHEMATICS•LOGIC
a process by which one figure, expression, or function is converted into another one of similar value.
Explanation:
If i end user licence agreement with my cell phone service provider does thateam i can switch to a different carrier
Answer:
Yes, in most cases, an end-user license agreement (EULA) with a cell phone service provider does not prevent you from switching to a different carrier. While the EULA may contain certain terms and conditions related to the use of the phone or the service, it does not usually prohibit you from switching to a different service provider if you choose to do so. However, it's important to read the EULA carefully to understand any restrictions or limitations that may apply.
Explanation:
Drag and drop the code statements to create a code segment that will prompt the user for a letter. Every time that letter appears in the word, the index value (or position) of the letter is displayed. If the letter is not found in the word, “not found” will display. The variable found is used as a flag to indicate the letter was found in the word.
The code statement and the related code segments are given below.
What is the code statement for the response?The required codes are given as follows:
letter = input("Enter a letter: ")
word = "supercalifragilisticexpialidocious"
index = 0
found = False
for char in word:
if char == letter:
print("Letter found at index:", index)
found = True
index = index + 1
if not found:
print("Not found")
In this code segment, the user is prompted to enter a letter which is stored in the variable letter. The variable word stores the word "supercalifragilisticexpialidocious" that we will search for the letter. The index variable is used to keep track of the position of the letter in the word. The found variable is initially set to False, and is used as a flag to indicate whether the letter was found in the word or not.
The for loop iterates over each character in the word, and checks if the character is equal to the input letter. If the character matches the letter, it prints the index of that character, sets found to True, and continues to the next character. The index variable is incremented in every iteration of the loop.
If the loop completes without finding the letter, the found variable will still be False, and the program will print "Not found" to indicate that the letter was not found in the word.
Learn more about code statement at:
https://brainly.com/question/29099843
#SPJ1
functions with vector parameters C++
Define a function IsSumNegative() that takes one integer vector parameter and one integer parameter. The function computes the sum of the vector's elements that are greater than or equal to the integer parameter. Then, the function returns true if the sum is negative, and returns false otherwise.
Ex: If the input is:
4
-1 1 -5 -7
-1
then the vector has 4 elements {-1, 1, -5, -7}, and the integer parameter is -1. The output is:
False, the sum of the elements that are greater than or equal to -1 is not negative.
Note: The sum is zero if no element is greater than or equal to the integer parameter.
--------------------------
#include
#include
using namespace std;
/* Your code goes here */
int main() {
vector inVector;
int size;
int input;
int i;
int x;
bool result;
// Read the vector's size, and then the vector's elements
cin >> size;
for (i = 0; i < size; ++i) {
cin >> input;
inVector.push_back(input);
}
cin >> x;
result = IsSumNegative(inVector, x);
if (result) {
cout << "True, the sum of the elements that are greater than or equal to " << x << " is negative." << endl;
}
else {
cout << "False, the sum of the elements that are greater than or equal to " << x << " is not negative." << endl;
}
return 0;
}
Answer:
Here's the pseudocode for the IsSumNegative function:
function IsSumNegative(vector, integer)
sum = 0
for each element in vector
if element >= integer
sum = sum + element
end for
if sum < 0
return true
else
return false
end if
end function
Explanation:
Note: This code assumes that the vector parameter is a std::vector<int> type.
For work, you stay at home while communicating and collaborating with people on the Internet. This is called
O A. the digital divide.
O B. telecommuting.
O C. telegraphing.
O D. digital permanence.
For work, you stay at home while communicating and collaborating with people on the Internet. This is called telecommuting.
Option B is correct.
What exactly does "telecommuting" entail?The practice of completing work assignments via an internet and phone connection from a location other than an office is referred to as "telecommuting," and it is also referred to as "teleworking."
How will telecommuting evolve in the future?Among other advantages, telecommuting has the potential to reduce daily trips and traffic congestion, improve air quality, increase productivity and efficiency, provide schedule flexibility, and promote work-life harmony.
What is the drawback of working from home?Technical issues are without a doubt one of the most significant obstacles to telecommuting. Problems with software and apps, hardware, and IT glitches can stop work in its tracks. The cure: Software bugs and hardware failures cannot be avoided, but you can try to stay one step ahead of them.
Learn more about telecommuting:
brainly.com/question/1100595
#SPJ1
Consider the following code and answer the question below.
FOR X = 1 TO 10 FOR Y = 10-X IF A(Y)<A(Y+1) THEN SWAP A(Y),A(Y+1) END IF NEXT Y NEXT X FOR J = 1 TO 10 PRINTA(J); NEXTJ END
1
11
111
1111
11111
What will be the calculation?As Given in the question:
The above QBasic code
Required,
The output
The iteration on the third line is repeated 5 times; i.e. for values of j from 1 to 5. In each iteration, the value of N is printed and the next value is calculated.
Initially, the value of N is 1 ---- on line 2
So, 1 is printed first. The next value of N is as follows:We keep replacing N (on the right-hand side) with current N value.
Therefore, The program is given below, 100 If, Load / by Load the first value 101 Subt Y / Subtract the value of Y, store result in AC.
Learn more about program on:
brainly.com/question/11023419
#SPJ1
A software developer is using a microphone and a sound editing app to
collect and edit sounds for his new game.
When collecting sounds, the software developer can decide on the sampling
resolution he wishes to use.
ii) Describe how sampling resolution will affect how accurate the
stored digitised sound will be.
b) The software developer will include images in his new game.
ii) The software developer is using 16-colour bit-map images.
State the number of bits required to encode data for one pixel of his
image.
iii) One of the images is 16384 pixels wide and 512 pixels high.
The developer decides to save it as a 256-colour bit-map image.
Calculate the size of the image file in gibibytes.
Answer:
i) The sampling resolution determines the number of bits used to represent each sample of the sound wave. The higher the sampling resolution, the more accurately the stored digitized sound will represent the original sound. This is because higher resolution allows for more fine-grained distinctions between sound wave amplitudes. However, increasing the sampling resolution also increases the size of the file, as more bits are needed to store the additional information.
ii) For a 16-color bitmap image, each pixel can be encoded using 4 bits (2^4 = 16). This means that 4 bits are required to represent the color of one pixel in the image.
iii) To calculate the size of the image file in gibibytes, we need to know the total number of pixels in the image and the size of each pixel in bits.
The image is 16384 pixels wide and 512 pixels high, so the total number of pixels is:
16384 x 512 = 8,388,608
If the image is saved as a 256-color bitmap image, each pixel can be encoded using 8 bits (2^8 = 256). Therefore, the size of each pixel in bits is 8.
To calculate the size of the image file in bits, we multiply the total number of pixels by the size of each pixel in bits:
8,388,608 x 8 = 67,108,864
To convert this to gibibytes, we divide by 2^30 (the number of bytes in a gibibyte):
67,108,864 / 2^30 = 0.0625 gibibytes
Therefore, the size of the image file is 0.0625 gibibytes (or approximately 64 megabytes).
Nested for loops. C++
Integer userValue is read from input. For each number from 1 to userValue, output the number indented by the number's value of dash characters, '-'. End each output with a newline.
Ex: If the input is 5, then the output is:
-1
--2
---3
----4
-----5
------------------------
#include
using namespace std;
int main() {
int userValue;
int i;
int j;
cin >> userValue;
/* Your code goes here */
return 0;
}
Answer:
Here's the code that solves the problem using nested for loops in C++:
Read userValue from input
for i = 1 to userValue
// print i with i number of dashes
for j = 1 to i
print "-"
end for
print i and a newline character
end for
Explanation:
Explanation:
We first read the user input userValue from input.
We use a for loop to iterate from 1 to userValue.
Inside the loop, we use another for loop to print the required number of dashes before the number. The number of dashes is equal to the current value of i.
We print the number i after the dashes, and end the line with a newline character.
After the loop ends, the program terminates.
Note: This is a general pseudocode that can be implemented in any programming language. The actual implementation may vary depending on the programming language used.
Which technology concept uses computer resources from multiple locations to solve a common problem?
Answer:
GRID COMPUTING is a computing infrastructure that combines computer resources spread over different geographical locations to achieve a common goal. All unused resources on multiple computers are pooled together and made available for a single task.
Explanation:
Types of Grid Computing With Examples
Computational grid computing.
Data grid computing.
Collaborative grid computing.
Manuscript grid computing.
Modular grid computing.
Write a function named print_product that accepts three numbers as parameters and prints the product. First, write the print_product function. Then, prompt the user for three inputs, and call your print_product function on those inputs.
Sample Run
Enter the 1st number: 11
Enter the 2nd number: 9
Enter the 3rd number: 8
The product: 792
Answer:
Here's the code for the print_product function in Python:
def print_product(num1, num2, num3):
product = num1 * num2 * num3
print("The product:", product)
And here's the code to prompt the user for three inputs and call the print_product function:
num1 = int(input("Enter the 1st number: "))
num2 = int(input("Enter the 2nd number: "))
num3 = int(input("Enter the 3rd number: "))
print_product(num1, num2, num3)
When you run the code and enter the sample inputs, it should output:
Enter the 1st number: 11
Enter the 2nd number: 9
Enter the 3rd number: 8
The product: 792