Answer:
K2O
Explanation:
It carries the chemical formula K2O. Potassium cannot be found free because it is too reactive. It has valency +1 and combines readily with oxygen atoms forming K2O.
hope it helps
Read the two passages. Silicon is an element that is directly below carbon on the periodic table. Silicon can form bonds similar to carbon. Silicon-silicon single bonds require 222 kJ/mol of energy to break. Based on the statements, how much energy would it take to break a carbon-carbon single bond?
Answer:
100kj/mol
Explanation:
Describe in general a process desert plants might need to carry out in order to maintain homeostasis. (4 points) All plants need water; think about how plants in an area without much water might be able to live.
Answer:
Cacti remain homeostasis because of the lack of leafs it has, because it has no leaves it absorbs less heat keeping more water, it also has a nice waxy coat that remains moist and grows depending on the amount of water it holds, and it's stem acts as a water supply keeping the plant fed and cool in harsh ecosystems.
Hope this helps.
Answer:
The person above me was right.
"Cacti remain homeostasis because of the lack of leafs it has, because it has no leaves it absorbs less heat keeping more water, it also has a nice waxy coat that remains moist and grows depending on the amount of water it holds, and it's stem acts as a water supply keeping the plant fed and cool in harsh ecosystems."
Explanation:
The temperature of a sample of gas at 8.5 atm and 59.2 °C increases to 140.0 °C. If the
volume is unchanged, what is the new gas pressure?
Select one:
O a. 10.6
Ob. 20.1
Oc. 6.84
Od. 119
Answer:
since that's the closest option we have
10.6atm
Explanation:
Since volume is constant
P1/T1 = P2/T1
P1 =8.5atm
T1 = 59.2°C = 332.2k
T2 = 140°C = 413k
P2 = ?
8.5/332.2 = P2/413
0.026 = P2/413
P2 = 0.026 x 413
P2 = 10.74atm
Find the mass of 3.02 mol Cl2.
Answer in units of g.
Answer:
the answer is 70.906 g/mol
Explanation:
Answer:
214.12 g
Explanation:
mass = no. of moles x molar mass
molar mass of Cl2 = atomic mass of Cl x 2
= 35.453 x 2
=70.906
so the mass of 3.02 mol Cl2 = 3.02 x 70.906
=214.12 g
Use the Trapezoid Rule to approximate the value of the definite integral
Answer:
7.0625
Explanation:
The trapezoidal rule ( this is an approximation ) tells you that the average of the left and right endpoints should be as follows,
[tex]\int _a^bf\left(x\right)dx\:\approx \frac{\Delta \:x}{2}\left(f\left(x_0\right)+2f\left(x_1\right)+...+2f\left(x_{n-1}\right)+f\left(x_n\right)\right)[/tex]
where [tex]\Delta \:x\:=\:\frac{b-a}{n}[/tex] ... at this point we can apply the Riemann Formula, in order to divide the interval 0 ≤ x ≤ 2 into n = 4 subintervals of length [tex]\:\Delta x=\frac{1}{2}\:[/tex].
[tex]x_0=0,\:x_1=\frac{1}{2},\:x_2=1,\:x_3=\frac{3}{2},\:x_4=2[/tex] ,
[tex]\frac{\Delta x}{2}=\frac{\frac{1}{2}}{2}=\frac{1}{4}[/tex]
= [tex]\frac{1}{4}\left(f\left(x_0\right)+2f\left(x_1\right)+2f\left(x_2\right)+2f\left(x_3\right)+f\left(x_4\right)\right)[/tex] - Let's calculate the sub intervals for each, substituting to receive our solution.
[tex]f\left(x_0\right)= 0[/tex] ( this is as 0⁴ is 0 )
[tex]2f\left(x_1\right)= 1/8[/tex] ( this is as [tex]2\left(\frac{1}{2}\right)^4=1/8[/tex] )
[tex]2f\left(x_2\right)=2[/tex] ( 2 [tex]*[/tex] 1⁴ is 2 )
[tex]2f\left(x_3\right)= 81/8[/tex] ( this is as [tex]2\left(\frac{3}{2}\right)^4 = 81/8[/tex] )
And finally [tex]f\left(x_4\right) = 16[/tex], as 2⁴ is 16. Therefore, let us plug in our solutions for each into the primary expression, and solve,
[tex]\frac{1}{4}\left(0+\frac{1}{8}+2+\frac{81}{8}+16\right)[/tex] = 7.0625 - this is our solution. The correct answer is option c, and i hope this clarifies why.
A certain polyatomic ion contains 49 protons and 50 electrons. What's the net charge of this ion?
A. +1
B.-2
C. +2
D. -1
Answer:
The charge - 1
Because the charge of proton is + and electron -
Charge = +49 +(-50)
= - 1
Explanation:
Convert the pressure 525.4 torr to kPa.
Select one:
O a. 70.0
Ob. 3940
O c. 9.90
Od. 525
Answer:
Option A. 70.0 KPa.
Explanation:
Data obtained from the question include:
Pressure (torr) = 525.4 torr
Pressure (kPa) =?
The pressure expressed in torr can be converted kPa as shown below:
760 torr = 101.325 KPa
Therefore,
525.4 torr = (525.4 x 101.325) / 760 = 70.0 KPa.
Therefore, 525.4 torr is equivalent to 70.0 KPa.
Three compounds that nitrogen and oxygen can form are NO, NO2, and N2O3. The law of multiple proportions tells you
A. the ratio of nitrogen to oxygen is always the same.
B. nitrogen combines with oxygen in small whole number mass ratios.
C. energy is conserved.
D. mass is conserved
The postulation of the law of multiple proportions tells us that; Choice B. nitrogen combines with oxygen in small whole number mass ratios.
The law of Multiple Proportions
Law of multiple proportions states that if two elements form more than one compound, then the ratios of the masses of the second element which combine with a fixed mass of the first element will always be ratios of small whole numbers.
On this note, nitrogen combines with oxygen in small whole number mass ratios.
Read More on Law of Multiple Proportions:
https://brainly.com/question/24435494
Help PLZ!!! Which statement accurately represents the arrangement of electrons in Bohr’s atomic model? -Electrons move around the nucleus in fixed orbits of equal levels of energy. -Electrons move around the nucleus in fixed orbits of increasing levels of energy. -Electrons move randomly in the relatively large space surrounding the nucleus. -Electrons vibrate in fixed locations around the nucleus.
Answer:
electrons move around the nucleus in fixed orbits of equal amounts of energy
Explanation:
To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. The correct option is option B.
What is atom?Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.
In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron.
According to Bohr’s atomic model, electrons move around the nucleus in fixed orbits of increasing levels of energy.
Therefore, the correct option is option B that is electrons move around the nucleus in fixed orbits of increasing levels of energy.
To know more about atom, here:
https://brainly.com/question/13518322
#SPJ5
Which of the following shows how rate depends on concentrations of reactants?
Answer:
C
Explanation:
Rate = k(A)m(B)n
The correct option is C.
What are K , m and N in the rate law equation?
The specific rate constant (k) is the proportionality constant relating the rate of the reaction to the concentrations of reactants.The exponents m and n are the reaction orders and are typically positive integers, though they can be fractions, negative, or zero.
What do you mean by concentrations of reactants?
The increase in the concentration of reactants, the rate of reaction increases. Ions and molecules interact to form a new compound on increasing the concentration.
Learn more about concentrations of reactants here : brainly.com/question/8314253
#SPJ2
For the reaction C + 2H2 - CH2, how many moles of hydrogen are required to produce
19.26 mol of methane, CHA?
Select one:
O a. 19.26
O b. 38.52
O c. 15.0
O d. 24.7
Answer: 38.52 moles of hydrogen will be required to produce 19.26 mol of methane
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} CH_4=19.26moles[/tex]
The balanced chemical reaction is:
[tex]C+2H_2\rightarrow CH_4[/tex]
According to stoichiometry :
1 mole of [tex]CH_4[/tex] is produced by = 2 moles of [tex]H_2[/tex]
Thus 19.26 moles of [tex]CH_4[/tex] will be produced by =[tex]\frac{2}{1}\times 19.26=38.52moles[/tex] of [tex]H_2[/tex]
Thus 38.52 moles of hydrogen will be required to produce 19.26 mol of methane
The table below gives the numbers of protons, electrons, and neutrons in four atoms.
Atom
11
2
Number of protons
39
40
|39
40
Number of electrons
39
40
39
40
Number of neutrons
52
50
154
51
3
14
Based on the information that is given, which atom in the table has the highest mass?
O 1
2
3
Answer:
The atom with the highest mass with 139 protons and 154 neutrons, is atom 3
Explanation:
The information given are;
The number of protons, p, the number of electrons, e, and the number of neutrons, n, we have;
p, e, n,
39, 39, 52
40, 40 50
139, 39 154
40, 39 51
Based on the information that the mass of the proton = 1.67262 × 10⁻²⁷ kg
The mass of the electron = 1.094 × 10⁻³¹ kg
the mass of the neutron = 1.674927471 × 10⁻²⁷ kg
We have that the atom with the most number of neutron and proton which is atom 3, has the highest mass
we have
A solar panel combines multiple photovoltaic cells. Which type of energy is used to power a solar panel?
Explanation:
Photovoltaic means electricity from light
photo = light voltaic = electricity
SUNLIGHT is the answer
Hope this is correct
HAVE A GOOD DAY!
Which group in the periodic table contains the lightest ferromagnetic element?
A. Group 7
B. Group 8
C. Group 10
D. Group 9
Group 8 in the periodic table contains the lightest ferromagnetic element. Therefore, option B is correct.
What is ferromagnetic material?Ferromagnetism can be described as a property of certain materials that results in a large observed magnetic permeability and large magnetic coercivity to form a permanent magnet.
Ferromagnetic materials are metals attracted to a magnet, a consequence of large magnetic permeability. Magnetic permeability can be defined as the induced magnetization of a material because of the presence of an external magnetic field.
A steel plate can acquire a permanent magnetization, which depends not only on the strength of the applied field but varies greatly among ferromagnetic materials.
Ferromagnetism can be described as the strongest type and is responsible for the phenomenon of magnetism in magnets. Substances weakly to magnetic fields with 3 other types of magnetism which are paramagnetism, diamagnetism, and antiferromagnetism.
Learn more about Ferromagnetism, here:
https://brainly.com/question/25267422
#SPJ2
Consider the reaction below.
NH4 + H20 - NH3 + H30"
Which is an acid-conjugate base pair?
O NHA and NH3
O NH4" and H30*
O H20 and NH3
O H20 and H20"
Answer:
The correct ans is....
Option B) NH4" and H30*
Explanation:
NH4" and H30* is an example of conjugate pair
Hope this helps....
Pls mark my ans as brainliest :)PLS, PLS, PLSThe acid-conjugate base pair : ( B ) NH₄⁺ and H₃O⁻
The chemical reaction is
NH₄ + H₂O --> NH₃ + H₃O
Acid-conjugate base pairAn acid-conjugate base pair is a pair that consists of two substances that are different from each other just by the presence or absence of a proton ( H⁺ ) it helps to determine the relative strengths of acids and bases.
Hence we can conclude that the acid-conjugate base pair : ( B ) NH₄⁺ and H₃O⁻.
Learn more about acid-conjugate : https://brainly.com/question/22390063
Describe one way in which each of the items you listed in Part 1 could be at least temporarily disrupted from equilibrium. Can you think of a way your body could respond to restore homeostasis after one of these disruptions? (3 points) Think about things that stress the body or do not supply the body's needs properly.
Answer:
Not enough exercise, not enough water, not a healthy diet. Consume fluids regularly during exercise, and drink 16 ounces of fluid for every pound lost during your workout.
Explanation:
37.2 liters of a gas has a pressure of 362.43 kPa at 46.5 °C. If the pressure increases to
693.9 kPa and the temperature to 149.2°C, what would be the new volume of the gas?
Select one:
O a. 25.7
O b. 62.3
O c. 54
O d. 25.672
Answer:25.7
Explanation:
(02.05 HC)
A scientist observed a certain type of a particular bacteria growing in a substance that had a 1,000 times higher amount of the antibiotic that targets this bacteria. Using complete
sentences, justify the observation based on your knowledge of natural selection
Answer:
Para otros usos de este término, véase Resistencia.
La resistencia antibiótica es la capacidad de un microorganismo para resistir los efectos de un antibiótico. La resistencia se produce naturalmente por selección natural a través de mutaciones producidas por azar. El antibiótico, al entrar en contacto con una población bacteriana, permite solo la proliferación de aquellas bacterias que presentan aquella mutación natural que anula la acción del antibiótico. Una vez que se genera la información genética, las bacterias pueden transmitir los nuevos genes a través de transferencia horizontal (entre individuos) por intercambio de plásmidos; o igualmente producto de una conversión lisogénica. Si una bacteria porta varios genes de resistencia, se le denomina multirresistente o, informalmente, superbacteria.
what is the the chemical name for hydroden and oxygen
Answer:
hydrogen peroxide is a chemical name for hydrogen and oxygen
Which of the following observations would indicate that a material is a pure substance?
O It does not dissolve in water.
O It changes color after heating.
O It cannot be physically broken down into different types of atoms.
O It can be physically broken down into different types of molecules
Save and Fyit
Noy
Answer:
C. It cannot be physically broken down into different types of atoms.
Which is the proper order for using a fire extinguisher? pull, aim, squeeze, sweep sweep, squeeze, aim, pull aim, pull, sweep, squeeze pull, sweep, aim, squeeze
Answer:
P.A.S.S
pull, aim, squeeze, sweep.
hope this answer correct (^^)..
Answer:
The proper way of using an extinguisher is:
pull, aim, squeeze and sweep.
Explanation:
P-pull
A-aim
S-squeeze
S-sweep
You can always use this to remember, okay.
Hope it helps.
According to this equation, how much P4O10 can be produced from 8.32 g of phosphorus? 4 P + 5 O2 → P4O10
Answer:
38.28
Explanation:
4×8.32(p)=33.28 33.28+5=38.28
Considering the reaction stoichiometry, 19.05 grams of P₄O₁₀ can be produced from 8.32 g of phosphorus.
The balanced reaction is:
4 P + 5 O₂ → P₄O₁₀
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
P: 4 moles O₂: 5 moles P₄O₁₀: 1 molesThe molar mass of each element or compound is:
P: 31 g/moleO₂: 32 g/moleP₄O₁₀: 284 g/moleThen, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
P: 4 moles× 31 g/mole= 124 gramsO₂: 5 moles× 32 g/mole= 160 gramsP₄O₁₀: 1 moles× 284 g/mole= 284 gramsThen you can apply the following rule of three: if by stoichiometry 124 grams of P produces 284 grams of P₄O₁₀, 8.32 grams of P produces how much mass of P₄O₁₀?
[tex]mass of P_{4} O_{10}=\frac{8.32 grams of Px284 grams of P_{4} O_{10}}{124 grams of P}[/tex]
mass of P₄O₁₀= 19.05 grams
Finally, 19.05 grams of P₄O₁₀ can be produced from 8.32 g of phosphorus.
Learn more with this examples:
brainly.com/question/16487206?referrer=searchResultsbrainly.com/question/14446695?referrer=searchResultsbrainly.com/question/11564309?referrer=searchResultsbrainly.com/question/4025026?referrer=searchResultsbrainly.com/question/18650135?referrer=searchResultsCalculations
Weight of acetanilide = 2.7g
Theoretical yield of Nitroaniline =
Weight of para-nitroaniline = 1.5g
Percentage yield of para-nitroaniline =
Please help me which this and show me how you get the answer thank you
Answer:
Theoretical yield: 2.75g of paranitroaniline
Percentage yield: 54.5%
Explanation:
In strong-acid medium, acetanilide (Molar mass: 135.16g/mol) reacts producing para-nitroaniline (138.12g/mol) in a 1/1 reaction.
Theoretical yield of para-nitroaniline is the mass produced assuming a yield of 100%. That is:
2.7g acetanilide × (1mol / 135.16g) = 0.020 moles of acetanilide.
Assuming a yield of 100% are 0.020 moles of paranitroaniline. Theoretical yield is:
0.020 moles × (138.12g / mol) =
Theoretical yield: 2.75g of paranitroanilinePercentage yield is:
(Actual yield / theoretical yield) × 100
Actual yield was 1.5g and percentage yield will be:
Percentage yield: (1.5g / 2.75g) × 100
Percentage yield: 54.5%We say that salts will dissociate but acids will react with water. We say that acids will
None are correct
hydrate
ionize
crystallize
hydrolize
Answer:
ionize
Explanation:
Acids are chemical substances that lose/donate their hydrogen ion (H+) when they react with water. This property of acids is termed IONIZATION. In a chemical reaction involving acids and bases, acids release their proton or hydrogen ion (H+) in the presence of water solutions to form a conjugate base, which is usually an anion.
For example, in the chemical reaction;
HX + H20 -------> X- + H30+
HX is the acid because it loses its electron to water and forms the anion, X-, which is the conjugate base. Hence, it can be said that acid HX ionizes in water.
A compound containing oxygen and group 16 and/or group 17 elements contains one of the following elements. The compound dissolves in water. Which element does
the compound contain?
A. Magnesium
B. Potassium
C. Barium
D. Strontium
Explanation:
pottassium its one of covalent bond
A solution of Cuso, is labelled 1.743 M. How much Cuso, in grams, must be used to make
1.4957 liter of solution?
Select one:
O a. 416.1
Ob. 0.007301
O c. 166.6
Od. 129.2
Answer:
Option A. 416.1 g.
Explanation:
Data obtained from the question include the following:
Molarity = 1.743 M
Volume = 1.4957 L
Mass of CuSO4 =..?
Next, we shall determine mole of CuSO4 present in the solution.
This is illustrated below:
Molarity is simply defined as the mole of solute per unit litre of the solution. Mathematically, it is expressed as:
Molarity = mole /Volume
With the above formula, we can obtain the mole CuSO4 present in the solution as follow:
Molarity = 1.743 M
Volume = 1.4957 L
Mole of CuSO4 =..?
Molarity = mole /Volume
1.743 = mole of CuSO4 /1.4957
Cross multiply
Mole of CuSO4 = 1.743 x 1.4957
Mole of CuSO4 = 2.607 moles
Finally, we shall convert 2.607 moles of CuSO4 to grams.
This can be obtained as follow:
Molar mass of CuSO4 = 63.55 + 32.06 + (16x4) = 159.61 g/m
Mole of CuSO4 = 2.607 moles
Mass of CuSO4 =..?
Mole = mass /molar mass
2.607 = mass of CuSO4 /159.61
Cross multiply
Mass of CuSO4 = 2.607 x 159.61
Mass of CuSO4 = 416.1 g
Therefore, 416.1 g of CuSO4 is needed to prepare the solution.
the reaxtion between calcium and nitrogen to form calcium nitride is a redox reaction.
In terms of electrons, explain why calcium is the reducing agent.
For the reaction 2KClO3 - 2KCI+ 302 how many moles of potassium chlorate are
required to produce 107.9 g of oxygen?
Select one:
O a. 2.26
Ob. 3450
O c. 1150
Od. 6.74
Answer:
the answer will be Oa. 2.26
Calculate the amount of 0.1 M acid needed to neutralize 10,000 liters of pH 8.0 water. The acid is Sulfuric Acid - H2SO4 Show your work for brainliest
Answer:
0.963
Explanation:
pH is the potential of hydrogen that can be determined by the hydrogen or hydroxide ion concentration. 10 mL is the amount required of 0.1 M to neutralize.
What is pH?pH estimates the acidic and the basicity of the solution when a solute is dissolved in the solvent.
Sulfuric acid is dissociated as:
H₂SO₄(aq) ⇌ H⁺(aq) + HSO₄⁻(aq)
pH is calculated as:
pH = -log [H⁺]
[H⁺] = 1x10⁻⁸ M
The moles in 10,000 L is, 10000L × 1x10⁻⁸ = 0.0001 moles
Moles of sulfuric acid required:
0.0001 moles × ( 1 mol H2SO4 ÷ 1 mol H⁺) = 0.001 moles
Further, volume is calculated as:
0.001 × (1L ÷ 0.1moles) = 0.01 L
Therefore, 10 mL of 0.1 M acid is needed to neutralize.
Learn more about pH and volume here:
https://brainly.com/question/23582578
#SPJ2
BrO3- (aq) + NO2(aq) → Br-(aq) + NO3-(aq) Balance this reaction in acidic conditions?
Answer:
BrO₃⁻ (aq) + NO₂(aq) + 4 H⁺→ Br⁻(aq) + NO₃⁻ + 2 H₂O
Explanation:
The law of conservation of matter states that since no atom can be created or destroyed in a chemical reaction, the number of atoms that are present in the reagents has to be equal to the number of atoms present in the products.
Then, you must balance the chemical equation. For that, you must first look at the subscripts next to each atom to find the number of atoms in the equation. If the same atom appears in more than one molecule, you must add its amounts.
The coefficients located in front of each molecule indicate the amount of each molecule for the reaction. This coefficient can be modified to balance the equation, just as you should never alter the subscripts.
By multiplying the coefficient mentioned by the subscript, you get the amount of each element present in the reaction.
Then, taking into account all of the above, you can determine the amount of elements on each side of the equation:
Left side: 1 Br, 5 O and 1 N
Right side: 1 Br, 3 O and 1 N
If the reaction occurs in an acidic medium:
Each excess oxygen atom is balanced by adding a molecule of water to the other side of the reaction. Hydrogens are balanced by adding protons (H⁺) on the opposite side to the water molecules.So, balancing the oxygen:
BrO₃⁻ (aq) + NO₂(aq) → Br⁻(aq) + NO₃⁻ + 2 H₂O
Left side: 1 Br, 5 O and 1 N
Right side: 1 Br, 5 O, 1 N and 4 H
Then, balancing the hydrogens:
BrO₃⁻ (aq) + NO₂(aq) + 4 H⁺→ Br⁻(aq) + NO₃⁻ + 2 H₂O
Left side: 1 Br, 5 O, 1 N and 4 H
Right side: 1 Br, 5 O, 1 N and 4 H
You can see that you have the same amount on each side of the reaction. So the reaction is balanced.