A negative answer for electric force in coulombs law indicates that the two objects have opposite charges and are attracted to one another which is option A.
Coulombs law explained.Coulomb's Law is a fundamental principle of physics that describes the electrostatic force between electrically charged particles. It states that the magnitude of the electrostatic force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
The equation for Coulomb's Law is given by F = k * (q1 * q2) / r^2, where F is the force between the charges, k is Coulomb's constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.
Coulomb's Law states that the magnitude of the electric force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. The negative sign in the equation indicates that the force is attractive if the charges are opposite and repulsive if the charges are the same
Therefore, if a student gets a negative answer when solving for electric force, it means that the two objects have opposite charges and are attracted to one another.
Learn more about coulomb's law below.
https://brainly.com/question/506926
#SPJ1
calculate the horizontal component of the net force, in newtons, on the charge which lies at the lower left corner of the rectangle.
The horizontal component of the net force on the charge which lies at the lower left corner of the rectangle is 2.62 × 10⁻⁴ N.
To solve both sections of the above problem, we must first determine the angle that the diagonals form with the horizontal sides. This could be given as:
θ = [tex]tan^{-}( \frac{9}{28})[/tex] = 17.82°.
Horizontal component:
There is no force transfer from the upper left charge to the lower left charge. So, the negative charges on the right will be the only ones we focus on.
Using Coulomb's law, force due to lower right charge can be given as:
[tex]k\frac{q^{2} }{D^{2} } = (9 * 10^{9})\frac{35^{2} * 10^{-18} }{28^{2}*10^{-2} }[/tex] = 1.41 × 10⁻⁴N.
In the situation mentioned above, all of the force was applied horizontally. We must now multiply by Cosθ in order to determine the force caused by the charge in the upper right.
[tex]F = k\frac{Q^{2} }{D_{1}^{2}+ D_{2} ^{2} } = 9*10^{9} \frac{35^{2}*10^{-18} }{(28^{2} *100^{-2})+ (9^{2} *100^{-)2} }[/tex] Cos (17.82°)N = 1.21 × 10⁻⁴N.
Therefore, the total force is equivalent to 2.62 × 10⁻⁴ N, oriented towards the right, since the nature of charges is attracting.
To know more about the horizontal components, refer:
https://brainly.com/question/25705666
#SPJ4
Complete question is:
Four point charges of equal magnitude Q = 35 nC are placed on the corners of a rectangle of sides D1 = 28 cm and D2 = 9 cm. The charges on the left side of the rectangle are positive while the charges on the right side of the rectangle are negative. Use a coordinate system fixed to the bottom left hand charge, with positive directions as shown in the figure.
Calculate the horizontal component of the net force, in newtons, on the charge which lies at the lower left corner of the rectangle.
Shown here is a plot of a pairwise potential between two interacting particles. The particles are initially at rest at ro 1.130 , and 1.2E energy is added as work. The two interacting particles define a closed system. Your plots should only extend into regions where particles separations are physically possible. a) Plot Etotal and KE as a function of r. Clearly mark rmin, Fmax if they apply. Explain how you determined your plots and their ranges. b) Are the particles described above bound or un-bound? Explain your reasoning.
The solution to the given problem is shown below: a) r = rmin, the particles are in equilibrium and do not move. b) The particles are bound because they need an external energy of 0.703E to be separated to an infinite distance.
a). Plot Etotal and KE as a function of r.
The potential energy (U) for the given potential function isU(r) = 2.25 [(ro/r)^12 - 2(ro/r)^6]The force, F(r) is given by the negative of the derivative of the potential energy function (r) = -dU/dr = 2.25 (12(ro/r)^13 - 12(ro/r)^7) / rEtotal and KE can be calculated using the following equations:
Etotal = KE + UKE = (1/2) mu^2Here,
m = mass of each particle and
u = relative velocity of the particles
We know that the total energy (Etotal) of the particles is 1.2E.
Therefore, KE = Etotal - U
The plot of Etotal and KE as a function of r is shown below:
The range of r can be determined by the range of the potential energy function, which is [ro, infinity).
The minimum potential energy (Umin) can be determined by finding the minimum value of the potential energy function. This can be found by equating dU/dr = 0, which gives (ro/r)^13 = (ro/r)^7.
Solving this equation gives r = ro (rmin).
At r = rmin,
the potential energy function has its minimum value Umin = -0.703E.
The maximum force (Fmax) can be found by equating dF/dr = 0, which gives
r = 1.122 ro.
At r = 1.122 ro,
the force has its maximum value Fmax = 2.355E.
The plot shows that Etotal is minimum at r = rmin and maximum at r = infinity.
KE is zero at r = rmin and maximum at r = infinity.
At r = rmin, the particles are in equilibrium and do not move.
b) The particles described above are bound. The potential energy function has a minimum value of Umin = -0.703E. Therefore, the particles are bound because they need an external energy of 0.703E to be separated to an infinite distance.
For more such questions on equilibrium
brainly.com/question/517289
#SPJ11
the potential difference between the head and the tail of a displacement vector that points at right angles to a uniform electric field is:
The potential difference between the head and the tail of a displacement vector that points at right angles to a uniform electric field is zero (0).
A uniform electric field refers to the electric field having the same magnitude and direction at all points in space. A uniform electric field is created by two parallel plates that have the same charge density and are close enough to each other that the edges can be ignored. The electric field strength of a uniform electric field is constant, which means that the direction and magnitude are the same at all points in space.
The potential difference between the head and tail of a displacement vector that points at right angles to a uniform electric field is zero (0). It is because the potential difference between two points is equal to the negative of the work done per unit charge in moving a positive test charge from one point to another point. When a displacement vector that points at right angles to a uniform electric field is moved from one point to another, no work is done because the electric field and displacement vector are perpendicular. As a result, the potential difference is zero.
Learn more about magnitude at:
https://brainly.com/question/2596740
#SPJ11
What is the concept of Schrodinger about nature of electron?
Answer: The behaviour of electrons inside atoms could be explained by treating them mathematically as waves of matter
Explanation:
Erwin Schrödinger proposed the quantum mechanical model of the atom, which treats electrons as matter waves.
Answer:
[tex]According \: to \: Schrodinger \: \\ model, \: nature \: of \: electron \: \\ in \: an \: atom \: is \: as \: wave \: \\ only
[/tex]
Can someone please do this for me !!’
1. Scrambled Eggs and Avocado Toast:
Carbs: 24g
Protein: 22g
Fat: 27g
Portion Size: 2 scrambled eggs, 1 slice of whole grain bread, 1/4 avocado
How You Might Feel: The healthy fats from the avocado can help you feel fuller for longer, and the protein from the eggs can help to stabilize blood sugar levels and reduce cravings.
2. Greek Yogurt and Berry Parfait:
Carbs: 37g
Protein: 17g
Fat: 5g
Portion Size: 1 cup of plain Greek yogurt, 1/2 cup of mixed berries, 1/4 cup of granola
How You Might Feel: The Greek yogurt provides a good source of protein, and the mixed berries are a good source of fiber and antioxidants. The granola adds some healthy fats and complex carbohydrates for sustained energy throughout the morning.
3. Whole Wheat Pancakes with Peanut Butter and Banana:
Carbs: 55g
Protein: 17g
Fat: 18g
Portion Size: 2 whole wheat pancakes, 1 tbsp of peanut butter, 1 banana
How You Might Feel: You might feel satisfied and energized after eating this breakfast, but it is higher in calories and carbohydrates than the other two options.
What are the healthy fats?
Healthy fats include monounsaturated and polyunsaturated fats such as those found in nuts, seeds, fatty fish, avocado, and olive oil. These fats can help improve cholesterol levels, lower inflammation, and reduce the risk of heart disease.
To know more about fats, visit:
https://brainly.com/question/28178760
#SPJ1
it takes 475 j of work to compress a spring 12 cm. what is the force constant of the spring (in kn/m)?
The force constant of a spring, or spring constant, is 3958.33 kn/m
The force constant of a spring, or spring constant, is a measure of the stiffness of a spring.
The force constant of a spring, the equation F = kx is used, where F is the force applied to the spring, k is the force constant, and x is the amount of displacement.
The force applied to the spring is 475 j and the displacement is 12 cm.
k = F/x = 475 j/0.12 m = 3958.33 kn/m
This means that for every 1 meter the spring is displaced, it exerts a force of 3958.33 kn. The higher the force constant, the more stiff the spring is, meaning that more force is needed to displace the spring.
A spring with a lower force constant is more flexible, meaning that less force is needed to displace it.
The force constant of a spring is an important factor to consider when designing mechanical systems, as it determines how much force is needed to displace the spring.
It is also important for predicting the amount of force a spring can apply to a given displacement, which is necessary for applications such as machines and vehicles.
to know more about spring constant refer here:
https://brainly.com/question/14670501#
#SPJ11
what principle states that the buoyant force experienced by an object is exactly equal to the weight of the fluid displaced?
The principle that states that the buoyant force experienced by an object is exactly equal to the weight of the fluid displaced is known as Archimedes' Principle. What is Archimedes' Principle? Archimedes' Principle is a scientific law that explains how objects behave in fluids (liquids and gases).
The buoyant force of an object in a fluid is equal to the weight of the fluid displaced by the object according to this principle. This principle is valid for any fluid and any object as long as the buoyancy and weight of the object and fluid are calculated correctly.
The force that causes objects to float or sink in fluids is known as buoyancy. The buoyant force on an object is the net upward force exerted by the fluid in which the object is submerged.
When an object is immersed in a fluid, the fluid exerts an upward force on the object. This buoyant force opposes the weight of the object and causes it to float if the buoyant force is greater than the weight of the object.
To know more about buoyant force refer here:
https://brainly.com/question/21990136#
#SPJ11
A 0100 kg hamster enters its exercise wheel, which has an inner diameter of 231 cm, and begins to run at t=0, accelerating at a constant rate. After t=0.800 seconds, the wheel is turning with a rotational frequency of 100 Hz. What is the tangential acceleration of the inner surface of the wheel between t= 0 and 1=0.800 s? ___ m/s2
Therefore, the tangential acceleration of the inner surface of the wheel between t=0 and t=0.800 s is approximately [tex]906.5 m/s^2.[/tex]
What is rotational frequency?The rotational frequency f is defined as the number of revolutions per second, which means that the wheel makes 100 revolutions in one second.
The angular velocity ω is the change in angle per unit time, so we can find it by multiplying the rotational frequency by 2π (the number of radians in one revolution):
ω = 2πf = 2π(100 Hz) = 200π radians/second
Now we can use the time interval and the angular velocity to find the angle through which the wheel has turned.
The time interval is Δt = 0.800 s, so the angle through which the wheel has turned is:
θ = ωΔt = (200π radians/second)(0.800 s) = 160π radians
The circumference of the inner surface of the wheel is C = πd, where d is the diameter of the wheel.
C = π(231 cm) = 725.4 cm
The tangential acceleration a_t is the acceleration of a point on the rim of the wheel, perpendicular to the radius.
We can use the formula for tangential acceleration:
a_t = rα
where r is the radius of the wheel and α is the angular acceleration.
We can find the radius of the wheel by dividing the diameter by 2:
r = d/2 = 231 cm/2 = 115.5 cm
Now we can find the angular acceleration by using the formula:
α = Δω/Δt
where Δω is the change in angular velocity and Δt is the time interval.
We know the initial angular velocity (zero), so we can find the change in angular velocity by subtracting the initial angular velocity from the final angular velocity:
Δω = ω - ω_0 = 200π radians/second - 0 radians/second = 200π radians/second
So the angular acceleration is:
α = Δω/Δt = (200π radians/second)/(0.800 s) = 250π [tex]radians/second^2[/tex]
Finally, we can find the tangential acceleration by multiplying the radius by the angular acceleration:
a_t = rα = (115.5 cm)(250π radians/[tex]second^2[/tex]) = 28875π [tex]cm/second^2[/tex]
a_t = 288.75π [tex]m/s^2[/tex]
Using a calculator, we get:
a_t ≈ 906.5 [tex]m/s^2[/tex] (rounded to one decimal place)
To know more about tangential acceleration visit:-
brainly.com/question/14993737
#SPJ1
A skydiver of mass 95kg ,before opening his parachute, falls at t1 with V1= 11m/s and at t2 with t2 v2=27m/s; supposing friction is zero, find the distance covered between t1 and t2
The skydiver covered a distance of approximately 94.9 meters before opening his parachute between t1 and t2, assuming no air resistance or friction.
v = final velocity = v2 = 27 m/s
u = initial velocity = v1 = 11 m/s
a = acceleration = g = 9.8 m/[tex]s^2[/tex]
s = (v² - u²) / 2a
s = (27² - 11²) / (2 x 9.8) = 94.9 meters
Resistance measures an item's potential to impede the drift of electrical present-day through it. it's far measured in ohms (Ω). Resistance is decided by way of the bodily residences of an item, along with its dimensions, material, and temperature. while electric-powered present-day flows thru a conductor, it encounters resistance that slows down its float. This resistance is as a result of the collisions among electrons and the atoms inside the conductor.
Resistance can be laid low with changes inside the bodily properties of the conductor, such as duration, cross-sectional region, or temperature. an extended or narrower conductor may have higher resistance, even as a much broader conductor could have decreased resistance. understanding resistance is critical for designing and working electrical circuits. with the aid of controlling the resistance of a circuit, engineers can make sure that the appropriate amount of current flows to electricity the devices linked to it.
To know more about Resistance visit here:
brainly.com/question/11431009
#SPJ4
explain why balancing the forces acting on a body is not enough to establish equilibrium. give an example to justify your answer.
Balancing the forces acting on a body is not enough to establish equilibrium because forces are not the only factor involved in determining whether or not an object is in equilibrium.
Equilibrium is established when the forces and torques on an object are balanced. There are two types of equilibria: static equilibrium and dynamic equilibrium.
Static equilibrium is when an object is at rest, while dynamic equilibrium is when an object is moving at a constant speed in a straight line. In both cases, the net force on the object must be zero in order to be in equilibrium. In addition, the net torque on the object must also be zero in order to be in equilibrium. This is because torque is a rotational force that can cause an object to rotate around its center of mass.
Example: A ladder leaning against a wall is a good example of a body that is not in equilibrium even though the forces acting on it are balanced. Even though the weight of the ladder and the force of gravity are balanced, the ladder is not in equilibrium because there is a torque acting on it due to the force of friction between the ladder and the ground. This torque causes the ladder to rotate around its center of mass, which can cause it to fall over if the torque is not countered by another force or torque.
Learn more about equilibrium at https://brainly.com/question/517289
#SPJ11
A worker uses a pulley system to raise a 225 N carton 16.5 m. A force of 129 N is exerted and the rope is pulled 33.0 m. What is the AMA of the system?
The actual mechanical advantage of the system would be 0.573.
Mechanical advantageThe AMA (Actual Mechanical Advantage) of a pulley system is defined as the ratio of the force applied to the system to the force required to lift the load. In this case, the force applied is the pulling force on the rope and the force required is the weight of the carton:
AMA = force applied / force required
To calculate the force required, we need to use the weight formula:
force required = weight = mass x gravity
where mass is the mass of the carton and gravity is the acceleration due to gravity, which is approximately 9.81 m/s^2.
mass = weight / gravity = 225 N / 9.81 m/s^2 ≈ 22.9 kg
force required = 22.9 kg x 9.81 m/s^2 ≈ 225 N
Now we can calculate the AMA:
AMA = force applied / force required = 129 N / 225 N = 0.573
Therefore, the AMA of the pulley system is approximately 0.573.
More on mechanical advantages can be found here: https://brainly.com/question/16617083
#SPJ1
Given resistors 3,486 and 760 connected in parallel, what is an equivalent resistor that could be used to replace both? (Calculate to one decimal places.)
The equivalent resistor for the resistors 3,486 and 760 connected in parallel is approximately 623.7 ohms.
To find the equivalent resistor for resistors 3,486 and 760 connected in parallel, you can use the formula:
1 / Req = 1 / R1 + 1 / R2
where Req is the equivalent resistor, R1 is the first resistor (3,486), and R2 is the second resistor (760).
Step 1: Calculate the reciprocals of the individual resistors:
1 / R1 = 1 / 3486 ≈ 0.000287
1 / R2 = 1 / 760 ≈ 0.001316
Step 2: Add the reciprocals together:
1 / Req = 0.000287 + 0.001316 = 0.001603
Step 3: Find the reciprocal of the sum to get the equivalent resistor:
Req = 1 / 0.001603 ≈ 623.7
The equivalent resistor for the resistors 3,486 and 760 connected in parallel is approximately 623.7 ohms.
To learn more about equivalent resistor https://brainly.com/question/29635283
#SPJ11
if an electric wire is allowed to produce a magnetic field no larger than that of the earth (0.50 x 10-4 t) at a distance of 15 cm from the wire, what is the maximum current the wire can carry? express your answer using 2 significant figures
If an electric wire is allowed to produce a magnetic field no larger than that of the earth (0.50 x 10-4 t) at a distance of 15 cm from the wire, the maximum current the wire can carry is 1.8 A.
The maximum current the wire can carry is 1.8 A.
The formula to calculate the magnetic field due to a current-carrying wire is given by,
B = μ₀I/(2πr)
Here, B = maximum magnetic field = 0.50 × 10⁻⁴ T
μ₀ = permeability of free space = 4π × 10⁻⁷ T m/II = current in the wirer = distance from the wire = 15 cm = 0.15 m
Putting the given values in the formula,
0.50 × 10⁻⁴ T
= 4π × 10⁻⁷ T m/I × (2π × 0.15 m)
Solving for I, we get,
I = 1.8 A
Therefore, the maximum current the wire can carry is 1.8 A.
For more such questions on current , Visit:
https://brainly.com/question/1100341
#SPJ11
jeff 60 kg and julia 45 kg are in two separate bumper cars 130 each. jeff was moving at 4 m/s north while julie was going 6 m/s west. julia bounces off going 2 m/s at an angle of 15 s of w. what is the final velocity and direction of jeff car
Final velocity of Jeff's car is 7.133 m/s south. The direction is 59.3° south of east.
In this issue, we can utilize preservation of energy to track down the last speed and course of Jeff's crash mobile after the impact with Julia's. Before the impact, the energy in the x-heading is zero, and in the y-course, it is 60 kg × 4 m/s = 240 kg⋅m/s north. Julia's force is 45 kg × 6 m/s = 270 kg⋅m/s west.After the crash, the energy in the x-course is rationed. The absolute energy in the x-course is as yet zero, as Julia's force that way is likewise zero. In the y-heading, the absolute force after the crash is 60 kg × vj + 45 kg × 2 m/s sin 15°, where vj is Jeff's last speed in the y-course.Utilizing protection of energy, we can compare the force when the crash in the y-heading:
60 kg × 4 m/s + 45 kg × 6 m/s = 60 kg × vj + 45 kg × 2 m/s sin 15°
Working on this situation, we get:
240 kg⋅m/s + 270 kg⋅m/s = 60 kg × vj + 12.19 kg⋅m/s
Addressing for vj, we get:
vj = (240 kg⋅m/s + 270 kg⋅m/s - 12.19 kg⋅m/s)/60 kg
vj = 7.133 m/s south
Consequently, Jeff's last speed is 7.133 m/s south. To find the course, we can utilize geometry. The point of Jeff's last speed concerning the x-pivot is given by:
θ = tan^-1(vj/4 m/s)
θ = 59.3° south of east
Accordingly, the last speed and heading of Jeff's amusement cart are 7.133 m/s at a point of 59.3° south of east.
To learn more about final velocity and direction, refer:
https://brainly.com/question/12634477
#SPJ4
(a) when a 9.00-v battery is connected to the plates of a capacitor, it stores a charge of 27.0 mc. what is the value of the capacitance? (b) if the same capacitor is connected to a 12.0-v battery, what charge is stored?
The formula for calculating capacitance is as follows:
C = Q/V
Where,
C = capacitance (Farads)
Q = charge (Coulombs)
V = voltage (Volts)
As given,
Q = 27.0 μC
V = 9.00 V
Substituting the given values in the above equation
C = 27.0 μC/9.00 V = 3.00 μF
Therefore, the value of capacitance is 3.00 μF.
The formula for calculating charge stored is as follows:
Q = CV
Where,
Q = charge (Coulombs)
C = capacitance (Farads)
V = voltage (Volts)
As given,
C = 3.00 μF
V = 12.0 V
Substituting the given values in the above equation,
Q = (3.00 × 10⁻⁶ F) × 12.0 V = 36.0 μC
Therefore, the charge stored is 36.0 μC.
Learn more about the charge stored at https://brainly.com/question/27393410
#SPJ11
imagine you are building a skateboard ramp and want to be sure its at a 35-degree angle and no more than 4 feet long. what height does it need to be?
To determine the height of the skateboard ramp, we can use trigonometry. We know that the angle of the ramp is 35 degrees and the length of the ramp cannot exceed 4 feet. Let's assume that the height of the ramp is h.
Using trigonometry, we can write:
tan(35 degrees) = h/4 feet
Solving for h, we get:
h = 4 feet x tan(35 degrees)
h = 2.87 feet (rounded to two decimal places)
Therefore, the skateboard ramp needs to be approximately 2.87 feet high to have a 35-degree angle and not exceed a length of 4 feet.
θ = 30°
The elevation angle is 30°.
Detailed explanation:
Given;
Wall height: w = 10 feet
The ramp is 20 feet long.
Angle of elevation equals
making use of trigonometry;
Sin = hypothenic opposite
Where;
Wall height w = opposite (opposite to elevation angle)
Ramp length = hypothenuse
Sinθ = w/l
(w/l) = arcsine
changing the values;
arcsine (10/20) equals
arcsine = (0.5)
θ = 30°
The elevation angle is 30°.
For more questions like angle visit the link below:
https://brainly.com/question/15144554
#SPJ11
what are the two most straightforward things that can be done on the spacecraft side to close a link with negative margin
When a communication link between a spacecraft and a ground station has a negative margin, it means that the received signal strength is weaker than the minimum required for proper communication.
If a spacecraft is experiencing a negative margin on a communication link, meaning that the received signal is weaker than the expected signal, there are two straight forward things that can be done on the spacecraft side to improve the link:
Increase the transmit power: By increasing the power of the signal being transmitted by the spacecraft, the received signal strength at the other end can be improved, which may close the link margin. However, increasing the power also increases the demands on the spacecraft's power supply and can cause thermal issues, so this approach should be used with caution.Use a larger antenna: The size of the antenna on the spacecraft affects the amount of power that can be transmitted or received. By using a larger antenna, the gain of the signal can be increased, which can improve the link margin.This approach may require reorienting the spacecraft to point the antenna in the right direction, but it is generally a less power-intensive solution than increasing transmit power.
To know more about the "spacecraft": https://brainly.com/question/29727760
#SPJ11
why does a two slit interference pattern also have a single slit pattern and why is the spacing of the two slit pattern narrower?
A two-slit interference pattern exhibits both a double-slit pattern and a single-slit pattern due to the diffraction of light waves, and the spacing of the two-slit pattern is narrower due to interference between the waves passing through each slit.
Therefore a two-slit pattern occurs when
It is formed when a coherent light source, such as a laser, passes through two closely spaced slits, and the resulting light waves interfere with each other. The interference pattern consists of a series of bright and dark fringes that are formed by constructive and destructive interference of the light waves. A two-slit interference pattern also has a single-slit pattern due to diffraction. The light diffracts as it passes through a slit, creating an interference pattern.The reason why a two-slit interference pattern also has a single-slit pattern is that each of the two slits behaves as a single slit, producing its own diffraction pattern.Therefore, when the two sets of diffracted waves overlap, they produce an interference pattern that consists of both the diffraction pattern from each individual slit and the interference pattern resulting from the overlapping waves.
To learn more about the slit interference pattern:
https://brainly.com/question/20366228.
#SPJ11
what is the distance between your eye and the image of the butterfly in the mirror? explain your answer.
The distance between your eye and the image of the butterfly in the mirror is: the same as the distance between your eye and the actual butterfly
The distance between your eye and the image of the butterfly in the mirror is the same as the distance between your eye and the actual butterfly, which is the sum of the distance from your eye to the mirror and the distance from the mirror to the butterfly.
To calculate this, we need to measure the distance from your eye to the mirror, which can be done using a ruler or tape measure, and then measure the distance from the mirror to the butterfly, which can be done using a ruler or tape measure as well. Once we have these two measurements, we can simply add them together to get the total distance between your eye and the image of the butterfly in the mirror.
To clarify further, let's use an example. If your eye is 10 cm away from the mirror and the butterfly is 30 cm away from the mirror, then the total distance between your eye and the image of the butterfly in the mirror is 40 cm. This is because 10 cm (from your eye to the mirror) + 30 cm (from the mirror to the butterfly) = 40 cm.
To know more about distance refer here:
https://brainly.com/question/15172156#
#SPJ11
how much charge, in micro-coulombs, must be transferred from the negatively charged to the positively charged plate to increase the potential difference between them by 77 v?
77 x 10⁶ micro-coulombs of charge must be transferred from the negatively charged to the positively charged plate to increase the potential difference between them by 77 V.
To increase the potential difference between a negatively charged plate and a positively charged plate by 77 V, you must transfer 77 x 10⁶ micro-coulombs of charge. This can be calculated using the equation:
Q = V * (10⁶)
where Q is the charge in micro-coulombs and V is the potential difference in Volts.
Plugging in 77 V for V, you get:
Q = 77 V * (10⁶)
Q = 77 x 10⁶ micro-coulombs.
Therefore, 77 x 10⁶ micro-coulombs of charge must be transferred from the negatively charged to the positively charged plate to increase the potential difference between them by 77 V.
Learn more about the charge here:
https://brainly.com/question/18763828
#SPJ11
A stopped object starts moving. After 3.2 s, it’s moving 18 m/s. The net force acting on it is 328 N. What is its mass?
The mass of the object would be 58.4 kg.
Mass/force problemThe problem can be solved using Newton's second law of motion, which states that the net force (F_net) acting on an object is equal to the mass (m) of the object multiplied by its acceleration (a):
F_net = m*a
We are given that the net force acting on the object is 328 N, and we know the object's acceleration from the change in velocity over time:
a = (final velocity - initial velocity) / time
a = (18 m/s - 0 m/s) / 3.2 s
a = 5.625 m/s^2
Substituting these values into the equation for Newton's second law, we get:
328 N = m * 5.625 m/s^2
Solving for m, we get:
m = 328 N / 5.625 m/s^2
m ≈ 58.4 kg
Therefore, the mass of the object is approximately 58.4 kg.
More on Newton's second law can be found here: https://brainly.com/question/13447525
#SPJ1
a 6 mf capacitor, a 10 mf capacitor, and a 16 mf capacitor are connected in parallel. what is their equivalent capacitance?
The equivalent capacitance of a 6 mF capacitor, a 10 mF capacitor, and a 16 mF capacitor connected in parallel is: 32 mF
This is because when capacitors are connected in parallel, their total capacitance is equal to the sum of their individual capacitances. The formula for calculating the equivalent capacitance (C) of capacitors connected in parallel is: C = C1 + C2 + C3 + ... In this example, C = 6 mF + 10 mF + 16 mF = 32 mF.
Capacitors are electrical components that store energy in the form of an electric field between two conductors (plates). When capacitors are connected in parallel, the electric field between the plates of each capacitor is the same, but the overall capacitance is increased due to the combined plate area of all the capacitors.
This increase in plate area is why the equivalent capacitance of the three capacitors in this example is 32 mF, which is larger than any of the individual capacitances.
To know more about capacitors refer here:
https://brainly.com/question/17176550#
#SPJ11
a 1-kg rock that weighs 10 n is thrown straight upward at 20 m/s. neglecting air resistance, the net force that acts on it when it is half way to the top of its path is
A net force of 10 N acts on the rock when it is halfway to the top of its path.
The net force acting on the rock can be calculated using the following equation:
Fnet = ma
Where Fnet is the net force, m is the mass, and a is the acceleration.
When the rock is halfway to the top of its path, its velocity is zero since it momentarily stops at the top of its motion. As a result, its acceleration is equal to the acceleration due to gravity, which is -10 m/s² since it is acting in the opposite direction to the upward direction. This is the gravitational force acting on the rock.
We can now calculate the net force acting on the rock at this point in its motion:
Fnet = ma
Fnet = (1 kg)(-10 m/s²)
Fnet = -10 N
Since the acceleration due to gravity is acting downward and the rock is moving upward, the net force is equal to the force of gravity, which is 10 N.
Therefore, the net force that acts on the rock when it is halfway to the top of its path is -10 N or 10 N in the downward direction. This net force is equal in magnitude to the weight of the rock.
Learn more about gravity:
https://brainly.com/question/940770
#SPJ11
a typical person can maintain a steady energy expenditure of 400 w on a bicycle. assuming a typical efficiency for the body and a generator that is 80 % efficient, what useful electric power could you produce with a bicycle-powered generator?
The useful electric power that could be produced with a bicycle-powered generator is 320 W.
A typical person can maintain a steady energy expenditure of 400 W on a bicycle. Thus, this is the power output that can be expected from a bicycle-powered generator.
However, not all of the power generated can be considered useful electric power since the generator itself has an efficiency of 80%.
Electric power is a unit of time-based measurement of how quickly electrical energy is transferred across an electric circuit.
Therefore, the useful electric power that could be produced with a bicycle-powered generator can be calculated as:
Useful electric power = Power output x Efficiency of the generator
Useful electric power = 400 W x 0.80 = 320 W
For similar question on electric power
https://brainly.com/question/28790634
#SPJ11
A wooden brick with mass M is suspended at the end of cords as shown above. A bullet with mass m is fired toward the brick with speed v0. The bullet collides with the brick embedding itself into the brick. The brick-bullet combination will swing upward after the collision. Consider the brick, earth, and bullet as part of a system. Express your algebraic answers in terms of quantities given and fundamental constants.
(a) During the collision of the brick and the bullet, compare the magnitude and direction of the impulse acting on the brick to the impulse acting on the bullet. Justify your answer.
(b) Determine the magnitude of the velocity v of the brick-bullet combination just after the collision.
c) Determine the ratio of the final kinetic energy of the brick-bullet combination immediately after the collision to the initial kinetic energy of the brick-bullet combination.
(d) Determine the maximum vertical position above the initial position reached by the brick-bullet combination.
BoldItalicUnderline
Answer: the answer given below
(a) Explanation: The impulse on an object is given by the change in momentum of the object. Before the collision, the bullet has momentum p1 = mv0 and the brick has momentum p2 = 0, since it is stationary. After the collision, the combined bullet-brick system has momentum p3.
Conservation of momentum requires that the total momentum before the collision is equal to the total momentum after the collision:
p1 + p2 = p3
mv0 + 0 = (m + M)V
where V is the velocity of the combined bullet-brick system after the collision. Solving for V, we get:
V = (mv0) / (m + M)
The impulse on the bullet during the collision is equal to the change in momentum of the bullet:
J_bullet = p3 - p1 = (m + M)V - mv0
Substituting the expression for V we found earlier:
J_bullet = (m + M)(mv0) / (m + M) - mv0 = 0
Therefore, the impulse on the bullet is zero during the collision.
On the other hand, the impulse on the brick during the collision is:
J_brick = p3 - p2 = (m + M)V - 0 = (m + M)(mv0) / (m + M) = mv0
Therefore, the magnitude of the impulse acting on the brick is equal to the initial momentum of the bullet, mv0, and it is in the same direction as the initial velocity of the bullet.
In summary, during the collision of the bullet and the brick, the impulse acting on the bullet is zero, while the impulse acting on the brick is mv0 in the direction of the initial velocity of the bullet.
(b) We can use the principle of conservation of momentum to solve for the velocity of the brick-bullet combination just after the collision. The total momentum of the system (bullet, brick, and Earth) is conserved before and after the collision. Initially, only the bullet has momentum, which is given by p1 = m*v0, and the momentum of the brick and Earth is zero. After the collision, the bullet becomes embedded in the brick, and the combined system of the brick-bullet has momentum p2. Since the momentum of the Earth is negligible compared to that of the bullet and brick, we can treat the system as closed and apply conservation of momentum:
p1 = p2
m*v0 = (M + m)*v
where v is the velocity of the combined system just after the collision.
Solving for v, we get:
v = (m*v0) / (M + m)
Therefore, the magnitude of the velocity of the brick-bullet combination just after the collision is:
|v| = |(m*v0) / (M + m)|
The direction of the velocity is upward, as the system swings up after the collision due to the conservation of momentum.
(c) The initial kinetic energy of the system is the kinetic energy of the bullet just before the collision, which is given by:
KE1 = (1/2)mv0^2
The final kinetic energy of the system is the kinetic energy of the combined brick-bullet system just after the collision, which is given by:
KE2 = (1/2)*(M + m)*v^2
Substituting the expression we found for v:
KE2 = (1/2)(M + m)[(mv0) / (M + m)]^2
KE2 = (1/2)(m*v0^2) / (1 + M/m)
The ratio of the final kinetic energy to the initial kinetic energy is:
KE2 / KE1 = [(1/2)(mv0^2) / (1 + M/m)] / [(1/2)mv0^2]
KE2 / KE1 = 1 / (1 + M/m)
Therefore, the ratio of the final kinetic energy of the brick-bullet combination immediately after the collision to the initial kinetic energy of the brick-bullet combination is:
KE2 / KE1 = 1 / (1 + M/m)
(d)To determine the maximum vertical position reached by the brick-bullet combination, we can use conservation of energy, assuming there is no energy loss due to friction or other dissipative forces. At the maximum height, the kinetic energy of the system is zero, and all the initial kinetic energy has been converted to potential energy due to the height above the initial position.
The initial total energy of the system is the sum of the initial kinetic energy of the bullet and the gravitational potential energy of the brick:
E1 = (1/2)mv0^2 + Mgh1
where h1 is the initial height of the brick above the ground, and g is the acceleration due to gravity.
At the maximum height, the final total energy of the system is the potential energy due to the height above the ground:
E2 = (M + m)gh2
where h2 is the maximum height reached by the brick-bullet combination above the initial position.
Since there is no energy loss, we can set the initial energy equal to the final energy:
E1 = E2
Substituting the expressions for E1 and E2 and solving for h2, we get:
(M + m)gh2 = (1/2)mv0^2 + Mgh1
h2 = [(1/2)mv0^2 + Mgh1] / [(M + m)*g]
Simplifying, we get:
h2 = (1/2)v0^2 / g + h1(M/m) / (1 + M/m)
Therefore, the maximum vertical position above the initial position reached by the brick-bullet combination is:
h2 = (1/2)v0^2 / g + h1(M/m) / (1 + M/m)
Hope this helps :)
what is the position space wavefunction for a particple in the ground state of a harmonic oscillator potential
The position space wavefunction for a participle in the ground state of a harmonic oscillator potential is ψ(x) = (mω/πh[tex]{)}^{1/4}[/tex] × exp(-mωx²/2h).
The position space wavefunction for a particle in the ground state of a harmonic oscillator potential is given by:
ψ(x) = (mω/πh[tex]{)}^{1/4}[/tex] × exp(-mωx^2/2h)
where m is the mass of the particle, ω is the angular frequency of the harmonic oscillator potential, ħ is the reduced Planck constant, and x is the position of the particle.
The ground state wavefunction has a Gaussian shape and is centered around the equilibrium position of the oscillator. It is a probability amplitude function that describes the probability of finding the particle at a particular position x. The maximum probability density occurs at x = 0, which is the equilibrium position of the harmonic oscillator.
Learn more about harmonic oscillator potential at
https://brainly.com/question/30606297
#SPJ4
if a gun shoots a bullet straight up with an initial speed of 400 m/s, then how high will the bullet go? (8163 m) g
The height the bullet will reach is 8163 m. We use kinematic equations to find the result.
How to find the height of an object will reach?In this case, the height the bullet will reach is determined by the initial speed, gravitational acceleration, and the time it is in the air. Using kinematic equations, the height of the bullet can be calculated as follows:
Initial vertical velocity, vi = 400 m/sGravitational acceleration, g = 9.81 m/sTime of flight, t = ?Using the equation vf = vi + g × t, the final vertical velocity can be calculated as:
vf = 400 + 9.81 × t
vf = 0
Rearranging the equation and solving for t yields:
t = -400/9.81 = -40.7 s
The initial vertical velocity is equal and opposite to the final velocity, thus the time of flight is 40.7 s. To calculate the maximum height the bullet reaches, use the equation h = vi × t + 1/2 × g × t²:
h = 400 × (-40.7) + 1/2 × 9.81 × (-40.7)²
h = 8163 m
Therefore, the bullet will reach a maximum height of 8163 m.
Learn more about kinematic equations here:
brainly.com/question/30470523
#SPJ11
a current of 0.6 a goes through an electric motor for 8 min. how many coulombs of charge flow through it during that time?
The current flowing through an electric motor is 0.6 A, and it flows for 8 min, coulombs of charge flow through it during that time are: 288
When current flows through a device, electric charge flows through the device, and electric energy is dissipated or consumed. Electric current is the amount of electric charge flowing past a point in a specified amount of time. The electric charge is transported through the wire from one end to the other.
The standard unit of charge is the coulomb, and it is defined as the amount of charge that passes a point in a conductor carrying a current of one ampere in one second. Given that the current flowing through an electric motor is 0.6 A, and it flows for 8 min, we can calculate the total charge flowing through it using the formula,
[tex]Q = I × tCharge, Q = 0.6 × 8 × 60[/tex]
As the charge Q is in coulombs, we need to convert the time from minutes to seconds, which is why we multiplied the time by 60. The result is 288 coulombs of charge that flowed through the electric motor during the 8 minutes. The electric motor transforms electrical energy into mechanical energy.
When a current flows through a wire, an electric field is created around the wire, and the charges in the wire experience a force. As a result, the wire is pushed in a certain direction, and the electric motor begins to rotate.
To know more about coulombs charge refer here:
https://brainly.com/question/14610086#
#SPJ11
a star simultaneously emits red light, blue light, x-rays, and radio waves in the direction of the earth. which will arrive first?
The answer is that the radio waves will arrive first at the Earth when a star emits red light, blue light, x-rays, and radio waves.
This is due to the fact that radio waves are long-wavelength electromagnetic radiation. As a result, they are less likely to be impeded or absorbed by the intervening space medium, and they can propagate without being affected by any other disturbances in the cosmos.
Furthermore, radio waves are not influenced by the earth's atmosphere, which is responsible for interfering with the passage of light rays to the surface of the earth. In other words, radio waves can traverse enormous distances in space without being obstructed or attenuated by any physical barrier.
Light rays, on the other hand, propagate via a straight line, which is known as the line of sight. Light rays may be deflected or absorbed by cosmic dust, gas clouds, or other materials found in interstellar space. This may cause them to travel in different directions, which might cause them to be redirected from their initial path. As a result, light rays must contend with these obstacles before reaching the earth, which may cause them to be weakened or distorted by the time they arrive.
Similarly, X-rays are also electromagnetic radiation but they are absorbed by interstellar matter. They are also affected by magnetic fields, and they might be redirected from their path as a result of the interstellar medium. This might cause them to be slowed down and travel a longer distance, making their journey longer.
Thus, radio waves will arrive first because of their long wavelength and low interaction with cosmic matter.
To know more about radio waves, refer here:
https://brainly.com/question/28874040#
#SPJ11
Need help badly, please answer!
Answer:
i will change this answer when you attach a picture with it
Explanation: