Answer:
A. True
Construction engineering focuses on managing the construction process of buildings and infrastructure projects, which involves supervising the creation of the building as well as the design. Construction engineers oversee the construction site, coordinate with different stakeholders, manage the budget, and ensure that the project is completed on time, on budget, and according to the specifications.
A ___________ is defined as a change in shape of the part between the damaged and undamaged area hat is smooth and continuous . When the part is straightened, it is returned to proper shape and state without any areas of permanent deformation.
A bend is defined as a change in the shape of the part between the damaged and undamaged area that is smooth and continuous.
What is a kink?
A kink can be defined as a sharp bend with a small radius over a short distance.
So when any part is kinked it must be replaced without any doubt. A part is kinked if it just doesn't work on the repair.
What is a bend?
Unlike a kink, a bend can be restored. That is after a bend also a part can be bought back to its original position.
When the part is straightened, it is returned to proper shape and state without any areas of permanent deformation.
To know more about bend visit:
https://brainly.com/question/27937041
#SPJ9
Where are floating calipers often used.
Answer:There are pistons on both sides of a fixed caliper. When the brakes are applied, the pistons apply the brake pads on both sides
Explanation:There are pistons on both sides of a fixed caliper. When the brakes are applied, the pistons apply the brake pads on both sides
two technicians are discussing what could be wrong with a hydraulically controlled automatic transmission/ transaxle that does not shift out of first gear regardless of vehicle speed. Technician A says that a defective governor could be the cause. Technician B says that a weak pump could be the cause.
Technician B says that a weak pump could be the cause. Tech a technician is correct.
What does an automatic transmission contain?The torque converter, hydraulic pump, planetary gears, clutches, and brakes are important components of the automatic transmission. The torque converter delivers engine power to the transmission input shaft and hydraulic pump. The planetary gears are arranged in a series, one after the other.
What is automatic transmission's purpose?An automatic transmission's primary function is to provide a wide range of output speeds while allowing the engine to operate within its limited speed range.
Question incomplete:
Two technicians are discussing what could be wrong with a hydraulically controlled automatic transmission/transaxle that does not shift out of first gear regardless of vehicle speed. Technician A says that a defective governor could be the cause. Technician B says that a weak pump could be the cause. Which technician is correct?
Learn more about automatic transmission:
brainly.com/question/14093047
#SPJ1
Problem 1
A single-phase 100-kVA, 14/2.4-kV transformer and connected to a source through a line impedance of 38.2 + j140 Ω as shown in Figure 1. The transformer’s equivalent series impedance referred to the secondary is 0.10 + j0.40 Ω. The load is 90 kW at 0.8 lagging power factor and 2300 V.
a) Find the voltage of the source.
b) Find the voltage regulation of the transformer for this load.
c) Find the efficiency of the transformer ignoring the core losses.
Answer: Your welcome!
Explanation:
a) The voltage of the source can be calculated using the equation V_source = V_load + I_load * Z_line, where V_load is the voltage of the load, I_load is the current of the load, and Z_line is the line impedance.
Using the given values, we can calculate the voltage of the source as V_source = 2300 V + (90 kW / 0.8 PF) * (38.2 + j140 Ω) = 4576.7 V
b) The voltage regulation of the transformer is the difference between the no-load voltage and the full-load voltage, divided by the full-load voltage. The no-load voltage of the transformer can be calculated using the equation V_NL = V_source * (1 + X_L / X_m), where V_source is the voltage of the source, X_L is the leakage reactance of the transformer, and X_m is the magnetizing reactance of the transformer.
Using the given values, we can calculate the no-load voltage as V_NL = 4576.7 V * (1 + 0.40 / 0.10) = 6378.8 V
The full-load voltage of the transformer can be calculated using the equation V_FL = V_NL - I_FL * Z_eq, where V_NL is the no-load voltage, I_FL is the full-load current of the transformer, and Z_eq is the equivalent series impedance referred to the secondary of the transformer.
Using the given values, we can calculate the full-load voltage as V_FL = 6378.8 V - (90 kW / 0.8 PF) * (0.10 + j0.40 Ω) = 5777.7 V
The voltage regulation of the transformer can then be calculated as VR = (V_NL - V_FL) / V_FL = (6378.8 V - 5777.7 V) / 5777.7 V = 10.3 %
c) The efficiency of the transformer can be calculated using the equation η = (P_out / P_in) * 100, where P_out is the output power of the transformer and P_in is the input power of the transformer.
Using the given values, we can calculate the efficiency as η = (90 kW / (90 kW + (90 kW / 0.8 PF) * (0.10 + j0.40 Ω))) * 100 = 98.5 %
In a very short period of time, the ride-arranging service Uber has grown from a small San Francisco-based startup to a global transportation powerhouse that is redefining the transportation industry. It is not surprising, then, that several governments are receiving tremendous pressure from other transportation companies to prohibit Uber from operating in their nation or community. In an essay of approximately 225 words, describe Uber’s business model and why it is considered a threat to the livelihood of transportation companies and employees in many countries. Include in your review, suggestions as to how these long-established transportation providers might address the Uber threat.
The answer of the given question based on the Uber application startup
growing rapidly the answer is given below,
What is Uber’s business model?Uber's business model is based on a sharing economy concept, which uses a smartphone application to connect riders with drivers.
Uber is a ride-arranging service that uses a smartphone application to connect riders with drivers. The company's business model is based on a sharing economy concept, which allows people to share resources and services with each other through online platforms. The Uber business model is considered a threat to traditional transportation companies and employees because it provides an alternative to traditional taxi and transportation services, which are often more expensive and less efficient.
One of the main reasons why traditional transportation providers see Uber as a threat is that it allows anyone with a car to become a driver, which creates more competition for the traditional taxi industry. Uber's model also provides riders with a convenient and flexible transportation option, which is often more affordable than traditional taxi services.
To address the Uber threat, traditional transportation providers could consider implementing similar sharing economy concepts in their own business models. For example, they could develop their own smartphone applications that connect riders with drivers, or offer car-sharing services to customers. They could also consider lowering their prices and improving their services to compete with Uber.
Another approach for traditional transportation providers would be to work with Uber and other ride-sharing companies to find a mutually beneficial solution. For example, they could partner with Uber to offer combined services that provide customers with a wider range of transportation options. They could also work together to develop regulations and policies that ensure fair competition and protect the interests of all stakeholders involved.
Overall, traditional transportation providers will need to adapt to the changing transportation landscape and find new ways to remain competitive in the face of growing competition from ride-sharing companies like Uber.
To know more about Threat visit:
https://brainly.com/question/30369923
#SPJ1
What happens if you depress this brake pedal here?
Any leak in the hydraulic system that causes uneven pressure to be practical to one side of the pressure differential piston will cause the warning light to illuminate.
How do the brake pedals on a car work?When a car's brake pedal is depressed, braking system calipers are energized by hydraulic pressure, clamping down on the disc brake to slow or stop the car.
The light is the only choice here is a short to ground in. This failure would cause the light to stay on all the time regardless of hydraulic condition.
Therefore, the master cylinder is activated when the braking system is depressed, and hydraulic fluid is then transmitted through the brake pedal to both the calipers.
Learn more about hydraulic pressure on:
https://brainly.com/question/857286
#SPJ1
A rotor has been refinished on and off-car brake lathe, you should do all the following except
Inspect the rotor for damage, check thickness, clean, install properly, and torque lug nuts.
Defien torque.
Torque is a measure of the twisting force that causes an object to rotate around an axis or pivot point. It is often expressed in units of pound-feet (lb-ft) or Newton-meters (N-m). Torque is important in many mechanical applications, including automotive engineering, as it determines the ability of a vehicle's engine to generate power and move the vehicle forward. In the context of automotive engineering, torque is the force that is applied to the wheels to turn them and move the vehicle.
If a rotor has been refinished on and off-car brake lathe, here are some things you should do:
1. Inspect the rotor for any visible damage or defects, such as cracks, warping, or excessive wear.
2. Check the thickness of the rotor to ensure that it is still within the manufacturer's specifications.
3. Clean the rotor with brake cleaner to remove any debris or contaminants.
4. Install the rotor onto the vehicle's hub, making sure that it is properly aligned and seated.
5. Torque the lug nuts to the manufacturer's specifications.
To learn more about torque click here
https://brainly.com/question/30338159
#SPJ1
The heart of a "pull" production system is _____.
Answer:
To build products based on actual demand and not on forecasts.
Examine this statement:
SELECT 3 * 2 + 2 / 4 FROM DUAL; What is the result?
Answer:
it is 2
Explanation:
this is sql command that return one line (from dual ) with taht math solved
The result of this SQL statement would be 6.5
Here is the breakdown of the calculation:
3 * 2 = 6
2 / 4 = 0.5
6 + 0.5 = 6.5
Define the term SQL.
SQL stands for Structured Query Language. It is a programming language used to manage and manipulate relational databases. SQL is used to communicate with a database, allowing users to create, read, update, and delete data from a database. SQL is widely used by software developers, database administrators, data analysts, and other professionals who work with data.
SQL consists of a set of commands that are used to interact with a database. These commands include SELECT, INSERT, UPDATE, DELETE, and others. SQL commands are used to retrieve data from a database, add new data, modify existing data, and delete data. SQL is used to create and manage database schemas, which define the structure of a database and the relationships between different tables.
The SQL statement SELECT 3 * 2 + 2 / 4 FROM DUAL; will produce a result of 6.5.
The statement is performing a simple arithmetic calculation, which involves multiplication, division, and addition. Here is the calculation part:
3 * 2 is calculated first, which gives us 6.
2 / 4 is calculated next, which gives us 0.5.
Finally, the results of step 1 and step 2 are added together, giving us the final result of 6.5.
Therefore, The keyword "FROM DUAL" is often used in Oracle databases to select a constant value. In this case, it doesn't have any impact on the calculation itself, as we're only performing a simple arithmetic operation.
To learn more about SQL click here
https://brainly.com/question/23475248
#SPJ1
Before choosing an area of focus to study, a student has a
B. Undeclared major. An undeclared major means that the student has not yet chosen a specific area of focus to study and has not declared a major.
What is an undeclared major?
An undeclared major is a status given to a college student who has not yet chosen a specific area of focus to study. This allows the student to explore various fields of study before committing to a major.
Students who are unsure about their academic interests or career goals may opt for undeclared majors. Once a student decides on a major, they can declare it and start taking courses specific to that field.
This status is common among students in their first or second year of college who are still exploring their options.
To learn more about major, visit: https://brainly.com/question/23693778
#SPJ1
Problem 2
A 1000-VA, 230/115-V transformer has been tested to determine its equivalent circuit. The results are:
Open-Circuit Test (on LV Side): VOC = 115 V, IOC = 0.11 A, POC = 3.9 W.
Short-Circuit Test (on HV Side): VSC = 17.1 V, ISC = 8.7 A, PSC = 38.1 W.
a) Find the equivalent circuit of this transformer referred to the low-voltage side of the transformer.
b) Find the voltage regulation at rated condition and (i) 0.8 lagging (ii) 1.0 (iii) 0.8 leading power factors.
c) Determine the transformer’s efficiency at rated condition and 0.8 lagging power factor.
Answer
The values of the series impedance (Zeq) and the shunt admittance must be determined in order to identify the equivalent circuit referred to as the low-voltage side (Yeq).
Initially, using data from the short-circuit test, we can compute the equivalent resistance and reactance in the HV side:
Rsc=Vsc/ISC=17.1 V/8.5 A =1.965 ohms
ISC = sqrt(38.12 - 1.9652) / 8.7 A = 4.588 ohms, where Xsc = sqrt(Psc2 - Rsc2)
Following that, we can get the series impedance for the low-voltage side:
Zeq is equal to ((VOC / IOC) - Rsc) / ((IOC / ISC) - 1) = ((115 V / 0.11 A) - 1.965 ohms) / ((0.11 A / 8.7 A) - 1) = 2.904 + j4.508 ohms.
Last but not least, we may determine the shunt admittance for the low-voltage side:
Yeq is equal to (IOC - ISC* Zeq / (Zeq2 + Rsc2)). (2.904 + j4.508) ohms / (2.904 + j4.508)2 + 1.965 ohms / (0.11 A - 8.7 A * (2.904 + j4.508) ohms) / VOC
To locate the equivalent circuit known as the low-voltage side, the series impedance (Zeq) and shunt admittance values must be established (Yeq).
To begin with, we may calculate the equivalent resistance and reactance in the HV side using the results from the short-circuit test:
Rsc = Vsc / ISC = 17.1 V / 8.5 A = 1.965 ohms
Where Xsc = sqrt and ISC = sqrt(38.12 - 1.9652) / 8.7 A = 4.588 ohms (Psc2 - Rsc2)
The series impedance for the low-voltage side is therefore obtained as follows:
((VOC / IOC) - Rsc) / ((IOC / ISC) - 1) = ((115 V / 0.11 A) - 1.965 ohms) / ((0.11 A / 8.7 A) - 1) = 2.904 + j4.508 ohms is the formula for Zeq.
The voltage drop at full load may be calculated using the equivalent impedance as follows:
VL = IL * ZeqHV = 1000 VA / 115 V = 8.7 A * (11.616 + j18.032) ohms = 212.62 - j331.53 V
The voltage drop at full load can be calculated using the equivalent impedance as follows:
8.7 A * (11.616 + j18.032) ohms = 212.62 - j331.53 V, where VL = IL * ZeqHV = 1000 VA / 115 V
Next, we may determine the voltage at full load:
VFL = 115 + 212,62 + 327,62 = 327,62
The current is 1.25 times greater at 0.8 lagging power factor than it is at unity power factor. As a result, IL is equal to 1.25 * 1000 VA / (327.62 V * 0.8)
The equivalent circuit of the transformer can be obtained by using the open-circuit and short-circuit test data.
What is transformer?A transformer is an inductive electrical device used to change the alternating current voltage.
The open-circuit test gives the magnetizing branch parameters, while the short-circuit test gives the equivalent resistance and reactance of the transformer.
Magnetizing branch parameters:
Rc = VOC / IOC = 115 V / 0.11 A = 1045 Ω
Xm = VOC / POC = 115 V / 3.9 W = 29.49 Ω
Equivalent resistance and reactance referred to LV side:
RLV = VSC / ISC = (115 V / 230 V)² × 38.1 W / 8.7 A = 0.961 Ω
XLV = (230 V / 115 V)² × 38.1 W / 8.7 A = 4.844 Ω
Voltage regulation is defined as the change in secondary voltage from no-load to full-load expressed as a percentage of the full-load voltage.
At rated condition, the transformer output power is 1000 VA. The input power can be calculated as follows:
Input power = Output power / Efficiency
Assuming the transformer has an efficiency of η, the input power is:
Input power = 1000 VA / η
The voltage drop in the equivalent series impedance (ESZ) of the transformer is:
Vdrop = η × (RLV × I² + XLV × I²) = η × I² × (RLV + XLV)
The secondary voltage at full-load is:
V2 = 115 V
The full-load current is:
I2 = 1000 VA / 115 V = 8.7 A
(i) 0.8 lagging power factor:
The apparent power is:
S = 1000 VA
The real power is:
P = S × 0.8 = 800 W
The reactive power is:
Q = S × sin(arccos(0.8)) = 600 VAR
The input current is:
I1 = S / (η × V1 × 0.8) = 4.35 A
The power factor angle is:
θ = arccos(0.8) = 36.87°
The impedance angle is:
φ = arctan(XLV / RLV) = 79.34°
The voltage drop in the ESZ is:
Vdrop = η × I² × (RLV + XLV) = η × (I1 / cosθ)² × (RLV + XLV)
The secondary voltage under load is:
V2' = V2 - Vdrop = 115 V - η × (I1 / cosθ)² × (RLV + XLV)
The voltage regulation is:
VR = (V2 - V2') / V2 × 100% = η × (I1 / cosθ)² × (RLV + XLV) / V2 × 100%
Substituting the values:
VR = η × (4.35 A / cos(36.87°))² × (0.961 Ω + j4.844 Ω) / 115 V × 100%
= η × 0.0334 × (0.961 + j4.844) / 115 × 100%
= η × 2.13%
(ii) 1.0 power factor:
The real power is:
P = S × 1.0 = 1000 W
The input current is:
I1 = S / (η × V1 × 1.0) = 4.35 A
The power factor angle is:
θ = arccos(1.0) = 0°
The impedance angle is:
φ = arctan(XLV / RLV) = 79.34°
The voltage drop in the ESZ is:
Vdrop = η × I² × (RLV + XLV) = η × (I1 / cosθ)² × (RLV + XLV)
The secondary voltage under load is:
V2' = V2 - Vdrop = 115 V - η × (I1 / cosθ)² × (RLV + XLV)
The voltage regulation is:
VR = (V2 - V2') / V2 × 100% = η × (I1 / cosθ)² × (RLV + XLV) / V2 × 100%
Substituting the values:
VR = η × (4.35 A / cos(0°))² × (0.961 Ω + j4.844 Ω) / 115 V × 100%
= η × 0.0334 × (0.961 + j4.844) / 115 × 100%
= η × 2.13%
(iii) 0.8 leading power factor:
The apparent power is:
S = 1000 VA
The real power is:
P = S × 0.8 = 800 W
The reactive power is:
Q = S × sin(arccos(0.8)) = 600 VAR
The input current is:
I1 = S / (η × V1 × 0.8) = 4.35 A
The power factor angle is:
θ = -arccos(0.8) = -36.87°
The impedance angle is:
φ = arctan(XLV / RLV) = 79.34°
The voltage drop in the ESZ is:
Vdrop = η × I² × (RLV + XLV) = η × (I1 / cosθ)² × (RLV + XLV)
The secondary voltage under load is:
V2' = V2 - Vdrop = 115 V - η × (I1 / cosθ)² × (RLV + XLV)
The voltage regulation is:
VR = (V2 - V2') / V2 × 100% = η × (I1 / cosθ)² × (RLV + XLV) / V2 × 100%
Substituting the values:
VR = η × (4.35 A / cos(-36.87°))² × (0.961 Ω + j4.844 Ω) / 115 V × 100%
= η × 0.0334 × (0.961 + j4.844) / 115 × 100%
= η × 4.74%
Thus, this can be the answer for the given scenario.
For more details regarding transformer, visit:
https://brainly.com/question/11709244
#SPJ1
What is the purpose of "post-quantum" cryptography?
The development of cryptographic systems that are resistant to both quantum and classical computers is the aim of post-quantum cryptography, often known as quantum-resistant cryptography.
To develop encryption techniques that quantum computers cannot decrypt is the goal of post-quantum cryptography?The basic objective of post-quantum cryptography (PQC), commonly referred to as quantum-resistant cryptography, is to create a secure system that works with current network and communication protocols. It is crucial that the system be protected from both quantum and conventional computers.
What principles govern post-quantum cryptography?Post-quantum cryptography refers to cryptographic techniques that are believed to be secure against a quantum computer attack (often public-key algorithms). It can take typical computers months or even years to solve these difficult mathematical equations.
To know more about cryptography visit:-
https://brainly.com/question/15205343
#SPJ1
Why is glass a good insulator?
I don't know the answer but i think it is: "The atoms in glass hold on tightly to their positively charged particles."
The combination of low thermal conductivity, high electrical resistance, amorphous structure, and transparency make glass a good insulator for a wide range of applications.
What are the several reasons that makes glass a good insulator?
Low thermal conductivity: Glass has a low thermal conductivity, which means that it does not conduct heat well. This property makes it difficult for heat to pass through glass, making it a good insulator.High electrical resistance: Glass is also a good electrical insulator due to its high electrical resistance. This means that it does not conduct electricity easily, making it safe for electrical applications.Amorphous structure: Glass has an amorphous structure, meaning that its atoms are arranged in a random pattern rather than a crystalline lattice. This makes it difficult for heat to be transferred through the material by conduction.Transparency: Glass is transparent to most wavelengths of light, which means that it can allow light to pass through while blocking the transfer of heat. This property makes it useful in applications such as windows and greenhouse panels, where it can provide insulation while still allowing sunlight to enter.To learn more about thermal conductivity, visit:
https://brainly.com/question/7643131
#SPJ1
Ms. Harris sponsors a lunchtime club called Engineering Lab. At the club meetings, students are invited to experiment with their designs. In their first
meeting, one team built and tested a prototype of a toy car while a second team used their time to do more sketching. When both cars were finished
and tested a month later, what was the MOST likely outcome for each team?
O A.
OB.
O C.
O D.
Both teams had spectacular fails.
Both teams had spectacular wins.
The prototype team's car had fewer glitches.
The non-protype team's car had fewer glitches.
Reset
Next
The team who built and tested a prototype of a toy car would have a fewer glitches than the other team.
What is a Prototype?
In order for the participating designers to make the necessary adjustments or changes in direction, a prototype is a straightforward experimental model of a proposed solution that is meant to rapidly and economically test or validate concepts, design assumptions, and other aspects of its development.
What is testing?
Software testing is the procedure of examining and confirming that a software application or product performs as it is designed.
It lessens and gets rid of bugs and faults.
So according to the question the second team are most one to get errors because they spent a lot of time on sketching which is less important than testing.
To know more about Prototype visit:
https://brainly.com/question/28187820
#SPJ9
A uniform beam of 15m has two supports. A and B respectively. Support A is 3G from the left end and support B at the right end. The beam carries a point load of 100N on the left end, another point load of 250N is 7m from the left end and also carries a point load of 150N that is 3m away from the 250N point of load towards support B. Ignore the weight of the beam
To solve this problem, we need to find the reactions at the two supports, which will help us determine the internal forces and moments in the beam.
How to calculate internal forces and moments in the beam?
Let's assume that the reaction at support A is RA and the reaction at support B is RB. Since the beam is in equilibrium, the sum of the forces and moments at any point must be zero. We can apply the equations of equilibrium to solve for the reactions.
Sum of forces in the vertical direction: RA + RB = 500N (the sum of the three point loads)
Sum of moments about A:
-100N x 0m + 250N x 7m + 150N x 10m - RB x 15m = 0
RB = (250N x 7m + 150N x 10m)/15m + 100N
RB = 320N
Substituting RB in the equation for the sum of forces, we get:
RA = 180N
So the reactions at support A and B are RA = 180N and RB = 320N, respectively. Now we can use these reactions to determine the internal forces and moments in the beam.
To simplify the calculations, we can break the beam into three sections: AB, BC, and CD.
For section AB (0 ≤ x ≤ 3m), we can calculate the shear force and bending moment at any point x using the equations:
V_AB(x) = RA = 180N
M_AB(x) = RA x = 180N x
For section BC (3m < x ≤ 7m), we can calculate the shear force and bending moment at any point x using the equations:
V_BC(x) = RA - 100N = 80N
M_BC(x) = RA x - 100N (x - 3m) = 80N x - 240N
For section CD (7m < x ≤ 15m), we can calculate the shear force and bending moment at any point x using the equations:
V_CD(x) = RA - 100N - 250N = -170N
M_CD(x) = RA x - 100N (x - 3m) - 250N (x - 7m) = -170N x + 1220N
Therefore, the internal forces and moments in the beam are:
For 0 ≤ x ≤ 3m:
V(x) = 180N
M(x) = 180N x
For 3m < x ≤ 7m:
V(x) = 80N
M(x) = 80N x - 240N
For 7m < x ≤ 15m:
V(x) = -170N
M(x) = -170N x + 1220N
To learn more about forces, visit: https://brainly.com/question/25748369
#SPJ1
Can someone tell me the equation to calculate the maximum load current?
I =1000 x s [ square root of three x v]
Explanation:
Answer:
To calculate full load current, divide the full load power by the product of the full load voltage times 1.723
Find the resistance across terminals a-b (Rab) by reducing the circuit to a single resistor. Assume R = 8 Ω
Answer:
It seems there's no circuit diagram attached to the question. Please provide a circuit diagram or a more detailed question.
Calculate the pressure drop which must be developed to pump mayonnaise along 15 m of a 40 mm diameter pipeline at a rate of 120 L min−1. Asume density of the fluid is 1090 kg/m3.
The pressure drop required to pump mayonnaise along 15 m of a 40 mm diameter pipeline at a flow rate of 120 L/min is approximately 18083.82 Pa.
What is the pressure dropTo calculate the pressure drop required to pump mayonnaise along 15 m of a 40 mm diameter pipeline at a flow rate of 120 L/min, we can use the Darcy-Weisbach equation:
ΔP = (f × (L/D) × (ρ × V^2)/2)
Where:
ΔP = pressure drop (Pa)
a = friction factor
L = length of pipeline (m)
D = diameter of pipeline (m)
ρ = density of fluid (kg/m^3)
V = velocity of fluid (m/s)
We first need to calculate the velocity of the fluid:
V = Q/A
Where:
Q = flow rate (m^3/s)
A = cross-sectional area of the pipeline (m^2)
Q = 120 L/min = 0.002 m^3/s
A = π×(D/2)^2 = π×(0.04/2)^2 = 0.0012566 m^2
V = 0.002/0.0012566 = 1.59 m/s
Next, we need to calculate the Reynolds number (Re) to determine the friction factor (a):
R = (ρ × V × D)/μ
Where:
μ = dynamic viscosity of fluid (Pas)
For mayonnaise, the dynamic viscosity can be assumed to be around 0.1 Pas.
Re = (1090 kg/m^3 × 1.59 m/s × 0.04 m) / 0.1 Pas = 693.24
Using the Moody chart or an online calculator with the Reynolds number and the relative roughness (ε/D), which is assumed to be 0.001 (typical for commercial steel pipes), we can find that the friction factor is approximately 0.025.
Now, we can calculate the pressure drop:
ΔP = (0.025 × (15/0.04) * (1090 × 1.59^2)/2) = 18083.82 Pa
Learn more on pressure drop here;
https://brainly.com/question/14202357
#SPJ1
Question
Entropy Analysis of the heat engine: consider a 35% efficient heat engine operating between a large, high-temperature reservoir at 1000 K (727 °C) and a large, cold reservoir at 308 K (35°C).
a. If it withdraws 1.2 MJ/s from the high-temperature reservoir, what would be the rate of loss of entropy from that reservoir and what would be the rate of gain by the low-temperature reservoir?
b. Express the work done by the engine in watts.
c. What would be the total entropy gain of the system?
d. Determine Carnot efficiency and recalculate the a, b, and c, accordingly.
Answer:
a. The rate of loss of entropy from the high-temperature reservoir is 1.2 MJ/s x (1 - 0.35) = 0.78 MJ/s, and the rate of gain of entropy by the low-temperature reservoir is 1.2 MJ/s x 0.35 = 0.42 MJ/s.
b. The work done by the engine is 1.2 MJ/s x 0.35 = 0.42 MW.
c. The total entropy gain of the system is 0.42 MJ/s x (1000 K - 308 K) = 124.8 MJ/s.
d. = 83 MJ/s
Explanation:
Here is a small C code:
while (you_can_do_this_homework[i] == k)
i+= 1;
You are given that the array named “you_can_do_this_homework” has some base address stored in x25. i and k correspond to register x22 and x24. Please translate the above C code to an equivalent assembly code with appropriate instructions. Write explanation for your code.
here is the code
loop:
ldr w0, [x25, x22, LSL #2] ; Load the value at index i of the array into w0
cmp w0, x24 ; Compare the value with k
b.eq done ; Branch out of the loop if they are equal
add x22, x22, #1 ; Increment i by 1
b loop ; Branch back to the start of the loop
done:
// Code after the loop goes here
Explanation:
The while loop in the C code is checking if the value at index i of the array you_can_do_this_homework is equal to the value k. If it is, the loop continues and i is incremented by 1. If it is not, the loop ends and the program moves on to the code after the loop.
In the assembly code, we first load the value at index i of the array into register w0 using the load register instruction (ldr). We use the base address of the array stored in x25 and x22 (which holds the value of i) to calculate the memory location of the element we want to load. We multiply x22 by 4 (the size of an integer) using the logical shift left instruction (LSL #2) since the array elements are integers.
We then compare the value in w0 with k using the compare instruction (cmp). If they are equal, we branch to the end of the loop (done) using the branch if equal instruction (b.eq).
If the values are not equal, we increment i by 1 using the add instruction (add x22, x22, #1) and branch back to the start of the loop using the unconditional branch instruction (b).
Once the loop ends, the program moves on to the code after the loop
How often should a technician conduct a Quality Inspection?
Answer: after installation and before first use, and after reassembly at any new site / location. And at suitable intervals to make sure no problems have surfaced.
If 4000 is invested now, 7000 four years from now, and 5000 six years from now at an interest rate of 6% compounded annually, what will be the total amount in 9
Explanation:
To solve this problem, we can use the formula for compound interest:
A = P(1 + r/n)^(nt)
where:
A = the final amount
P = the principal amount (the initial investment)
r = the annual interest rate (as a decimal)
n = the number of times the interest is compounded per year
t = the time (in years)
Let's start with the first investment of $4000:
A1 = 4000(1 + 0.06/1)^(1*9)
= 4000(1.06)^9
= $6,542.51
Now, let's move on to the second investment of $7000, made four years from now:
A2 = 7000(1 + 0.06/1)^(1*5)
= 7000(1.06)^5
= $9,381.81
Finally, let's calculate the third investment of $5000, made six years from now:
A3 = 5000(1 + 0.06/1)^(1*3)
= 5000(1.06)^3
= $5,674.32
The total amount after 9 years will be the sum of these three amounts:
Total = A1 + A2 + A3
= $6,542.51 + $9,381.81 + $5,674.32
= $21,598.64
Therefore, the total amount after 9 years will be $21,598.64.
In the following load-tracing problem, construct a series of FBDs and show the propagation of loads
through the various structural elements.
Determine the column loads (A1, A3, B2, C2, D1, and D3)
Assuming:
DL (decking, flooring, etc) = 10 psf
LL (occupancy) = 40 psf
Beam B-2 spans between girder G-3 and column B-2
Beam B-3 spans between girder G-3 and column C-2
Using the equations of statics, we can solve for the reaction forces and column loads. The final results are:
RD3 = 5150 lb
R = 6950 lb
RC2 = 8400 lb
VL = 1800 lb
Define reaction force.
A reaction force is a force exerted by support on a structure or object, in response to the weight or load applied to the structure or object. In other words, it is the force that an object exerts on a support or surface that it rests upon, in order to maintain static equilibrium. Reaction forces can be either vertical or horizontal, and they are equal in magnitude but opposite in direction to the applied force. These forces are essential to keep structures stable and in balance.
Here is the solution to the load-tracing problem:
1. Free-body diagram (FBD) for column D3:
Vertical load: 40 psf
Reaction force: RD3
2. FBD for girder G3:
Vertical load: 10 psf (dead load from beam B2) + 40 psf (live load from beam B2) + 10 psf (dead load from beam B3) + 40 psf (live load from beam B3) = 1800 lb
Horizontal load: 0 lb
Reaction force: R
3. FBD for column C2:
Vertical load: 10 psf (dead load from beam B3) + 40 psf (live load from beam B3) + 10 psf (dead load from girder G3) + 40 psf (live load from girder G3) = 3150 lb
Reaction force: RC2
4. FBD for beam B3:
Vertical load: 10 psf (dead load from beam B3) + 40 psf (live load from beam B3) = 500 lb
Horizontal load: 0 lb
Shear force: VL (vertical load from girder G3)
Moment: VL * L/2 (where L is the span of beam B3)
5. FBD for girder G2:
Vertical load: 10 psf (dead load from column B2) + 40 psf (live load from column B2) = 500 lb
Reaction force: RG2
6. FBD for column B2:
Vertical load: 10 psf (dead load from beam B2) + 40 psf (live load from beam B2) + 500 lb (vertical load from girder G2) = 2100 lb
Reaction force: RB2
7. FBD for beam B2:
Vertical load: 10 psf (dead load from beam B2) + 40 psf (live load from beam B2) = 500 lb
Horizontal load: 0 lb
Shear force: VR (vertical load from girder G3) + RB2 (vertical load from column B2)
Moment: VR * L/2 + RB2 * L/2 (where L is the span of beam B2)
8. FBD for girder G1:
Vertical load: 10 psf (dead load from column A1) + 40 psf (live load from column A1) = 500 lb
Reaction force: RG1
9. FBD for column A1:
Vertical load: 10 psf (dead load from beam A1) + 40 psf (live load from beam A1) + 500 lb (vertical load from girder G1) = 2100 lb
Reaction force: RA1
10. FBD for beam A1:
Vertical load: 10 psf (dead load from beam A1) + 40 psf (live load from beam A1) = 500 lb
Horizontal load: 0 lb
Shear force: RA1 (vertical load from column A1)
Moment: RA1 * L/2 (where L is the span of beam A1)
We can solve for the reaction forces and column loads. The final results are:
RD3 = 5150 lb
R = 6950 lb
RC2 = 8400 lb
VL = 1800 lb
To learn more about reaction force click here
https://brainly.com/question/1013858
#SPJ1
Technician A says that frequently overlooked items when conducting a Pre-Delivery Service
include the battery not fully charged, rubber body plugs not installed, and vehicle interior and/or
exterior not thoroughly clean.
Technician B says that frequently overlooked items when conducting a Pre-Delivery Service
include remote keyless system not working properly, poor audio reception, child Safety Door
Looks left in the "ON" position, and seats or seat memory not operating properly.
Who is right?
Pre-Delivery Service (PDS) is a crucial stage in keeping the new car clients of your dealership happy. According to client input, the following areas require extra consideration while completing PDS.
What is Pre delivery service?Thorough inspection for body dents and dings as well as paint chips and scratches. Interior cleanliness; Correct operation of mechanical systems; Appropriate operation of electrical accessories.
Dealers are required to start posting a first oil change reminder sticker prior to delivery to assist in reminding clients that routine oil changes are necessary for the proper maintenance of their vehicle.
Customers will be reminded to visit your dealership again for their initial oil change if you do this.
Therefore, Pre-Delivery Service (PDS) is a crucial stage in keeping the new car clients of your dealership happy. According to client input, the following areas require extra consideration while completing PDS.
To learn more about Pre delivery service, refer to the link:
https://brainly.com/question/9653588
#SPJ9
What type of caliper is shown here?
Answer:
its a floating caliper definetly
need help with these two questions. ASAP
Answer:
Explanation:
be confident
Apart from her engineering notebook, Sofia files electronic PDF copies of her best sketches as she finishes them. When she has time, she writes
summaries describing her role in projects large and small, adding photos. What is the MOST practical reason that Sofia is doing this?
A.She is adding extras to the firm's project files.
B.Sofia is distinguishing herself from her coworkers.
C.She is building a portfolio to represent her work.
D. Sofia is protecting herself from legal challenges.
1. Write an SQL statement to display SKU and SKU_Description.
2. Write an SQL statement to display SKU_Description and SKU
3. Write an SQL statement to display WarehouseID.
4. Write an SQL statement to display all data on products in inventory having a
Quantity On Hand greater than 0.
5. Write an SQL statement to display the SKU and SKU_Description for products
having QuantityOnHand equal to 0.
6. Write an SQL statement to display SKU, SKU_Description, and WarehouseID for
all products that have a QuantityOnHand equal to 0 or a QuantityOnOrder equal
to 0.
7. Write an SQL statement to display SKU, SKU_Description, and WarehouseID for
all products that have a QuantityOnHand equal to 0 and a QuantityOnOrder
greater than 0.
8. Write an SQL statement to display the SKU, SKU_Description, WarehouseID, and
QuantityOnHand for all products having a QuantityOnHand greater than 1 and less than 10
SELECT used to access the records from one or more database tables and views. It also retrieves the selected data that follow the conditions we want.
1. Write an SQL statement to display SKU and SKU_Description.
SELECT sku, sku_description FROM inventory.
2. Write an SQL statement to display SKU_Description and SKU
SELECT sku_description, sku FROM inventory.
3. Write an SQL statement to display WarehouseID.
SELECT warehouseID FROM inventory.
4. Write an SQL statement to display all data on products in inventory having a Quantity On Hand greater than 0.
SELECT * FROM inventory WHERE QuantityOnHand > 0
5. Write an SQL statement to display the SKU and SKU_Description for products having QuantityOnHand equal to 0.
SELECT SKU, SKU_Description FROM inventory WHERE QuantityOnHand = 0
6. Write an SQL statement to display SKU, SKU_Description, and WarehouseID for all products that have a QuantityOnHand equal to 0 or a QuantityOnOrder equal to 0.
SELECT SKU, SKU_Description, Warehouse ID FROM inventory WHERE QuantityOnHand = 0 OR Quantity OnOrder = 0
7. Write an SQL statement to display SKU, SKU_Description, and Warehouse ID for all products that have a Quantity On Hand equal to 0 and a QuantityOnOrder greater than 0.
SELECT SKU, SKU_Description, WarehouseID FROM inventory WHERE QuantityOnHand = 0 AND QuantityOnOrder > 0
8. Write an SQL statement to display the SKU, SKU_Description, WarehouseID, and QuantityOnHand for all products having a QuantityOnHand greater than 1 and less than 10
SELECT SKU,SKU_Description, WarehouseID FROM INVENTORY WHERE QuantityOnHand > 1 and QuantityOnHand < 10
Learn more about SELECT here:
https://brainly.com/question/28180711
#SPJ4
Which statement about criteria and constraints is true
Criteria define project goals, while constraints set boundaries and limitations, and both are important in the design process.
Define the term boundaries.
Boundaries refer to the limits or constraints that define the extent or scope of something, such as a system, process, or project. Boundaries can be physical, conceptual, or organizational and may be defined by external factors like laws, regulations, or standards, or by internal factors like resources, capabilities, or objectives. Boundaries can help to clarify responsibilities, prevent misunderstandings, and ensure that activities or outcomes are consistent with expectations and requirements.
The statement that is true about criteria and constraints is that they are both important factors to consider in the design process of a project.
Criteria are the desired features, functions, and performance requirements that a project must meet to be considered successful. They define the goals and objectives of the project and help to evaluate whether or not the project has achieved its intended purpose.
Constraints are the limitations and restrictions that affect the design and development of a project. They can be related to resources, such as time, budget, materials, and manpower, as well as technical, legal, ethical, and environmental considerations. Constraints set boundaries and parameters for the project and may require trade-offs or compromises to be made.
In the design process, criteria and constraints are used to guide decision-making and problem-solving. Designers must balance the desired criteria with the constraints that exist, to arrive at a solution that meets the project goals while also being feasible and practical to implement.
Therefore, both criteria and constraints are important and interrelated factors to consider in the design process of a project.
To learn more about boundaries click here
https://brainly.com/question/17414539
#SPJ1
What is Cloud computing
Answer:
the practice of using a network of remote servers hosted on the internet to store, manage, and process data, rather than a local server or a personal computer.
Explanation:
there u go