"Consciousness is everything. Consciousness and "conscious" are catch-all terms that refer to a wide range of mental events. Both have a variety of connotations, and the word "conscious" is used to describe both specific mental states and processes (state consciousness) as well as entire creatures (creature consciousness).
Your distinctive awareness of your own thoughts, memories, emotions, sensations, and surrounds is what is known as consciousness. Being aware of oneself and one's surroundings is the essence of consciousness.
This awareness is personal to you and subjective. It is a sign that something is a part of your consciousness if you can verbalize what you are experiencing.
To learn more about consciousness refer the link:
https://brainly.com/question/1657612
#SPJ9
what is her angular momentum around the center of the merry-go-round with the child and the ball on it
Answer: The total angular momentum of the person-merry go round system is constant
Explanation:
How long would it take an airplane to travel 1350m if it started from rest and accelerated at a constant 3.00 m/s^2?
The time taken for the airplane to travel 1350 m from rest is 30 s
Data obtained from the questionThe following data were obtained from the question:
Initial velocity (u) = 0 m/sDistance (s) = 1350 mAcceleration (a) = 3 m/s² Time (t) = ?How to determine the timeThe time taken to travel the distance of 1350 m can be obtained as follow:
s = ut + ½at²
1350 = (0 × t) + (½ × 3 × t²)
1350 = 0 + 1.5t²
1350 = 1.5t²
Divide both sides by 1.5
t² = 1350 / 1.5
t² = 900
Take the square root of both sides
t = √900
t = 30 s
Thus, it will take 30 s for the plane to travel a distance of 1350 m
Learn more about acceleration and velocity:
https://brainly.com/question/491732
https://brainly.com/question/3411682
#SPJ1
Consider a sign suspended on a boom that is supported by a cable, as shown. What is the proper equation to use for finding the net force in the y direction?
Fnety = (FT)(sin 32°) + Fg
Fnety = (FT)(sin 32°) – Fg
Fnety = (FT)(cos 32°) + Fg
Fnety = (FT)(cos 32°) – Fg
The proper equation to use for finding the net force in the y direction is B. Fnety = (FT)(sin 32°) – Fg
What is net force?The total force acting on an object is its net force. The net force can be determined using Newton's second law, which states that F = ma, where: F is the net force. The object's mass is given by m. Acceleration is a.
The total of all forces acting on an object is known as the net force. A mass can accelerate due to net force. A body is subject to another force whether it is at rest or in motion. The net force is a word used in a system where there is a substantial number of forces.
In this case, the proper equation to use for finding the net force in the y direction is B. Fnety = (FT)(sin 32°) – Fg.
Learn more about force on:
https://brainly.com/question/25239010
#SPJ1
Answer:
B. Fnety = (FT)(sin 32°) – Fg
Explanation:
just did it!
based on the knowledge you gained from the video and the data that you’ve seen, what do you think is creating the data that kepler gathered? explain your answer
https://youtu.be/gypAjPp6eps
The telescope created the data gathered by Kepler and his team.
What is a star?
A star is a large luminous astronomical body which produces light and heat energy as well as radiation.
There are billions of stars in the universe organized into galaxies.
The Sun is the star of our solar system.
The Kepler project produced a wide range of data products and documentation to assist the community in using data from the mission to help study both exoplanets and other astrophysical areas.
In the video, a mysterious star was observed which is 50 percent bigger and 1,000 degrees hotter than the Sun.
By mean of telescopes, it was observed that the dimming seen in the diet was dues to dust particles.
These data produced ranges from engineering data on the detectors to lists of planet candidates and includes many of the intermediate data products in the data processing path.
The Kepler first mission came to an end after four years when two of the four reaction wheels, used to point the spacecraft malfunctioned.
Learn more about stars at: brainly.com/question/25880445
#SPJ1
The car covers a distance of 20 km due east in two hours and truck covers 60 km in 3 hours due west. What is their speed and velocity?
Taking into account the definition of speed ans velocity, the speed and velocity of the car are 10 km/h and 10 km/h due east respectively and the speed and velocity of the truck are 20 km/h and 20 km/h due west respectively.
Definition of speedSpeed is a physical quantity that expresses the relationship between the space traveled by an object and the time used for it. That is, the speed is associated with the change of position of an object in space within a certain amount of time.
The speed can be calculated using the expression:
speed= distance traveled÷ time
Definition of velocityVelocity is a physical magnitude that relates the displacement of an object, the time it takes to make this change in position and direction. So it is considered a vector magnitude.
The velocity can be calculated using the expression:
velocity= distance traveled÷ time
Velocity has units of distance/time and includes direction of travel.
Speed and velocity in this caseIn this case, you know:
The car covers a distance of 20 km due east in two hours. Truck covers 60 km in 3 hours due west.The speed and velocity of the car can be calculated:
speed= 20 km÷2 hours= 10 km/hvelocity= 20 km÷2 hours= 10 km/h due east.The speed and velocity of the truck is calculated as:
speed= 60 km÷3 hours= 20 km/hvelocity= 60 km÷3 hours= 20 km/h due west.In summary, the speed and velocity of the car are 10 km/h and 10 km/h due east respectively and the speed and velocity of the truck are 20 km/h and 20 km/h due west respectively.
Learn more about speed and velocity:
https://brainly.com/question/21729272
https://brainly.com/question/13943409
#SPJ1
8. a car enters a freeway with a speed of 23 km/h and accelerates to a speed of 86 km/h in 3.5 min. how far does the car move while accelerating?
The car moves 50 km while accelerating.
What is acceleration?
In mechanics, speed increase is the pace of progress of the speed of an article regarding time. Speed increases are vector amounts. The direction of an item's speed increase is given by the direction of the net power following up on that article. For instance, when a vehicle begins from a halt (zero speed, in an inertial casing of reference) and goes in an orderly fashion at speeding up, it is advancing toward movement. In the event that the vehicle turns, a speed increase happens toward the new bearing and changes its movement vector. The speed increase of the vehicle in its momentum bearing of movement is known as a straight (or distracting during roundabout movements) speed increase, the response to which the travelers on board insight as a drive pushing them once again into their seats. While taking a different path, the affecting speed increases.
Learn more about acceleration, refer:
https://brainly.com/question/25876659
#SPJ4
What is simple slope/ what is the simple slope equation?
The slope of a line is also referred to as the gradient and it is the number which describes both the direction and the steepness of the line.
What is Slope equation?This type of formula is used to calculate how steep a line is and is usually denoted as m. The formula can be seen below:
m = y2-y1 / x2-x1
Slope can be defined as the ratio of the vertical change between two points to the horizontal change between two points and measures the steepness of a line.
The chosen answers provided are therefore the most appropriate in this context.
Read more about Slope here https://brainly.com/question/3493733
#SPJ1
Will the following pairs of atomic orbitals interact constructively, destructively, or with no net overlap if they approach along the indicated axis?.
If the atomic orbitals are oppositely charged then they interact destructively.
In Chemistry, molecular orbital theory refers to the pattern of electron movement in a molecule.
It states that electrons have wave-like nature and their combination is the result of the atomic wavefunction.
According to this theory, there are two types of orbitals: bonding orbitals (BO) and anti-bonding orbitals(ABO).
Electrons in bonding orbitals make the molecule more stable as compared to electrons of anti-bonding orbitals.
Atomic orbitals form molecular orbitals and the combination of waves in molecule orbitals forms constructive and destructive interference. In-phase waves give rise to constructive interference.
While the combination of out-of-phase waves results in destructive interference that results in a straight line with no amplitude.
If you need to learn more about the atomic orbitals click here:
https://brainly.com/question/20319149
#SPJ4
if an electron is released from infinity, how fast will it be traveling after falling to within 1 x 10-10 m of a proton?
If an electron is released from infinity, after falling to within 1x10-10 m of a proton its speed will be 2.25x10^-6 m/s.
What is speed?
Speed is typically characterized as rapidity in motion, travel, or action; swiftness; and celerity. The speed of light and the speed of sound are two instances of speed. Speed of motion or forward movement; relative quickness in moving, progressing, etc.: we're moving really quickly. the fullest, highest, or most efficient pace of motion: The car just needs nine seconds to accelerate to its top speed. According to special relativity, the maximum speed at which energy or information may move is equal to the speed of light in a vacuum, which is equal to c = 299792458 meters per second (about 1079000000 kilometers per hour or 671000000 mph).
To learn more about speed ,visit:
https://brainly.com/question/28224010
#SPJ4
The total leaf area a of a leafy plant scales with the total plant's mass m as a∝m3/4. Part a if you replace one large tree with two smaller trees, each with half the mass of the original tree, by what factor do you increase the total leaf area?
The total leaf area is increased by a factor of 1.
What is the total leaf area, a of the tree?The total area of the leafy plant is given by the formula below:
Area, a ∝ m3/4a = k m/34
where m is the mass of the tree
The mass of the two smaller trees are half the masses of the bigger trees.
The total area of each of the smaller leafy plants are given are given as follows:
a ∝ m/2 * 3/4
a ∝ m3/8
a = k * m * 3/8
The total area of the two trees: k * m * 3/8 + k * m * 3/8
a = 2 * k * m * 3/8
a = k * m * 3/8
Therefore, the area is increased by a factor of 1.
Learn more area at: https://brainly.com/question/25965491
#SPJ1
in the trapazoid below, x=?
A polygon with only one set of parallel sides is called a trapezoid. The parallel bases of a trapezoid are another name for these parallel sides. Trapezoids have two additional sides that are not parallel and are referred to as their legs. The value of x is 12.
What is a Trapezoid?A four-sided shape called a trapezoid has one pair of parallel sides. It fundamentally resembles a square, rectangle, or parallelogram in two dimensions. So, like other shapes, this one has a boundary and an area.
There are some Mid-segment characteristics :
Parallel to each boxHalf the sum of length of the basesAlso called the medianNow, according to the diagram, make an equation :
5x-20 = [(2x+6) + (4x+2)] / 2
5x-20 = (6x+8)/2
5x-20 = 3x+4
5x-3x = 20+4
2x = 24
x = 12
Hence, the value of x is 12.
To get more information about Trapezoid :
https://brainly.com/question/12623349
#SPJ1
A girl rides her bike at 18 m/s for 31 s. How far does she travel in that time
Answer: 558 meters in 31 seconds.
Explanation:
You simply do 18*31 because every single second for thirty one seconds, the girl is going 18 meters.
Therefore, at this rate, she would ride about 558 meters in 31 seconds.
Answer:
558 m
Explanation:
The formula for distance, given speed and time, is D=ST. When you plug the numbers into this, D=(18)(31), and 18 times 31 *puts in calculator* is 558.
The speed is in meters per second, so meters would be your unit.
So, the answer is 558 m.
Hope I helped!!! :)
a 0.40kg mass is attached to an ideal spring. if it oscillates horizontally with a period of 0.50s and an amplitude of 0.20m, then determine the spring constant of the spring? group of answer choices
By angular speed, the spring constant is 63.21 N/m.
We need to know about the angular speed of harmonic oscillation. the angular speed can be determined as
ω² = k / m
where ω is angular speed, k is spring constant, and m is the mass.
The angular speed can be calculated by
ω = 2π/T
Hence,
ω² = k / m
(2π/T)² = k / m
where T is period.
From the question above, we know that:
m = 0.4 kg
T = 0.5 s
By substituting to the equation, we get
(2π/T)² = k / m
(2π/0.5)² = k / 0.4
158.04 = k / 0.4
k = 63.21 N/m
Find more on angular speed at: https://brainly.com/question/6860269
#SPJ4
Answer:
63 N/m
Explanation:
Khan
how many picoseconds are there in 1 Ms?
Because most particles fired at metal foil passed straight through, rutherford concluded that.
Because most particles fired at metal foil passed straight through, Rutherford concluded that only a small area of an atom is positively charged called the nucleus.
According to Rutherford's atomic model, the atom is a tiny particle that is made up of fundamental objects called electrons, protons, and neutrons.
In the center of an atom, there is a dense, micro-sized, and positively charged nucleus.
All the mass of an atom resides in the nucleus around which small and negatively charged particles revolve in orbitals called electrons.
However, this model suggests that when electrons were bombarded on gold metal foil, most of them went straight and only a few changed their path after colliding with the positively charged nucleus.
If you need to learn more about the atom click here:
https://brainly.com/question/26226232
#SPJ4
Why is the following situation impossible? A team of researchers discovers a new gas, which has a value of γ = C_P / C_V of 1.75.
A team of researchers discovers a new gas, which has a value of 1.75 which is impossible. Because the value of the heat capacity is 1.66.
What is the heat capacity ratio?The heat capacity ratio sometimes referred to as the adiabatic index, the ratio of specific heat, or Laplace's coefficient in heat engineering and thermodynamic parameters, is the fraction of the heat capacity at constant pressure [tex]( \rm C_P)[/tex] to the heat capacity at constant volume [tex](\rm C_V)[/tex].
For the mono-atomic gases, the heat capacity ratio is maximum, then it decreases with bi-atomic gases, and it further decreases for tri-atomic gases.
A group of scientists finds a new gas with a heat capacity of 1.75 which is impossible. Due to the maximum heat capacity value is 1.66.
More about the heat capacity ratio link is given below.
https://brainly.com/question/13345720
#SPJ1
Is a rocket in the process of launching, Balanced or Unbalanced force?
The forces during rocket launching are unbalanced as, without unbalanced force, there can not be any motion.
Forces constantly balance and become out of balance during a rocket flight. On the launch pad, a rocket is balanced. Gravity tries to pull the rocket down, but the surface of the pad pushes it upward.
When the rocket's engines are lit, the thrust from them causes the forces to become out of balance, which causes the rocket to ascend. For a rocket to launch from a launch pad or for a spacecraft to change speed or direction, an unbalanced force must be applied.
Therefore, when the rocket is in the process of launching, the forces that act on the rocket are unbalanced.
LEARN MORE ABOUT FORCE HERE:
https://brainly.com/question/2537310
#SPJ9
Describe the change in motion F = 300 N. V = 0 m/s F = 450 N
When a moving body's direction changes, its velocity doesn't always go to zero. Only when the body's total displacement is zero does velocity become zero.
A change in the body's state of motion is reflected in either a change in the body's speed or its direction of motion. A force is an attempt to alter the status of an object, whether it is stationary or moving. The speed shift might indicate acceleration or slowdown (deceleration). Acceleration measures the change in speed as opposed to velocity, which measures speed in a vector (also in a vector). The velocity is zero, which indicates that although the item is not moving, there is a force exerted on it due to acceleration.
Hence the change in motion is zero
Learn more about Motion here
https://brainly.com/question/28171613
#SPJ9
The function =pmt(c5,c7,-c3) is stored in cell c15. What must be stored in cell c5?
When function =pmt(c5,c7,-c3) is stored in cell c15. Cell c5 must contain a Periodic interest rate.
We know that periodic interest rate is the rate that is realized on an investment, or loan over a specific period of time. Basically, the periodic rate is the annual interest rate divided by the number of periods.
In Excel the syntax of Rate Function is RATE(nper, pmt, pv, [fv], [type], [guess]), where pv stands for the loan amount, nper is the period of payment and pmt is the periodic payment.
To know more about periodic interest rates refer to the https://brainly.com/question/13735414?referrer=searchResults.
#SPJ4
You push on a couch with a force of 200
N. The couch and floor have a coefficient
of static friction of 0.6, and there is a
normal force of 700 N. What is the
maximum static friction between the
couch and floor?
Answer: 420 N
Explanation:
coefficient of static friction * normal force=maximum static friction force
0.6 * 700N=maximum static friction force
6/10 * 700N=
700*6/10=
4200/10=420 N
a woman walks due west on the deck of a ship at 3 mi/h. the ship is moving north at a speed of 18 mi/h. find the speed and direction of the woman relative to the surface of the water.
The velocity of a woman is (3i + 18j) m/s with a magnitude of 18.25 m/s and 80.54⁰ from the west.
We need to know about vectors to solve this problem. Velocity is included in vectors because it has magnitude and also direction. Velocity can be determined as the distance traveled divided by time interval. Velocity can be written as
v = vx i + vy j
the magnitude of velocity can be determined as
|v| = √(vx² + vy²)
the angle of the vector from x-axis is
tanθ = vy / vx
From the question above, we know that
vx = ( 3 i )mi/h
vy = ( 18 j ) mi/h
Hence, the velocity relative to the surface water is
v = vx i + vy j
v = (3i + 18j) m/s
the magnitude is
|v| = √(vx² + vy²)
|v| = √(3² + 18²)
|v| = √333
|v| = 18.25 m/s
the direction is
tanθ = vy / vx
tanθ = 18/3 = 6
θ = 80.54⁰
Find more on velocity at: https://brainly.com/question/25749514
#SPJ4
A 30.0 -turn solenoid of length 6.00 cm produces a magnetic field of magnitude 2.00 mT at its center. Find the current in the solenoid.
The current in the solenoid is [tex]3.18\times10^{-11}A[/tex].
Solenoids are basically coils of twine. These generate a magnetic subject that strives a pressure over a steel component.A magnet could be a basic period of time for a coil of twine that we have a tendency to use as associate magnet.We to boot ask the tool that might convert power into mechanical power as a magnet.Actually it generates a magnetic subject for developing linear movement from the electrical up-to-date. With employing a magnetic subject.Magnetic field at the centre of a solenoid of length 'L' having 'N' number of turns with a current 'I' is given by [tex]B=\frac{u_0NI}{L}[/tex] ...(1)It is given that 30.0 -turn solenoid of length 6.00 cm = 0.06m produces a magnetic field of magnitude 2.00 mT at its center .
Putting above values in equation (1) , we get
[tex]2.00=\frac{4\pi \times10^{-7}\times30.0I}{0.06} \\\\I=\frac{2.00\times0.06}{4\pi \times10^{-7}\times30.0} \\\\I=3.18\times10^{-11}A[/tex]
Learn about solenoid more here :
brainly.com/question/15218721
#SPJ4
What is astrology considered?
A. A pseudoscience
B. A peer reviewed Science
C. A true science
D. A soft science
Answer:
It might be A!
Explanation:
I'm not entirely sure!
Give me an example of a hypothesis in a proper format
Answer: Students who eat breakfast will perform better on a math exam than students who do not eat breakfast.
Explanation:
Hope this helps!
the density of liquid mercury is 13.5 g/cm3. what mass (in kg) of mercury is required to fill a 2.00 l container?
27.00 kg of liquid mercury is needed to fill a 2.0 L container.
The required mass of mercury in kg to fill a 2.0 L container can be determined through proper conversion of units.
Conversion of cm3 to L:
1 cm3 = 1 mL and 1000 mL = 1L
1000 cm3 = 1 L
Conversion of g to kg:
1000 g = 1 kg
Determine the product of density and volume of the container to solve for the required mass of mercury.
(13.5 g/cm3) x ( 1000 cm3/1 L) x (2.0 L) = 27,000 g
27,000 g * (1 kg/1000 g) = 27 kg of mercury
To learn more about unit conversion, please refer to https://brainly.com/question/4158962.
#SPJ4
A physicist drives through a stop light. When he is pulled over, he tells the police officer that the Doppler shift made the red light of wavelength 650nm appear green to him, with a wavelength of 520nm . The police officer writes out a traffic citation for speeding. How fast was the physicist traveling, according to his own testimony?
The physicist traveling, according to his own testimony at -6.6 × 10⁷ m/s.
How fast was the physicist traveling, according to his own testimony?Using the formula for doppler shift for light,
λ' = λ√[(1 + v/c)/(1 - v/c)] where
λ = wavelength of source, λ' = wavelength of observer, v = speed of source and c = speed of lightGiven that the driver is moving away from the stop light, we take the driver as the source. Since, the Doppler shift made the red light of wavelength 650nm appear green to him, with a wavelength of 520nm. we have
λ' = wavelength of source = 650 nm, λ' = wavelength of observer = 520 nmSo, substituting the values of the variables into the equation, we have
λ' = λ√[(1 + v/c)/(1 - v/c)]
520 nm = 650 nm√[(1 + v/c)/(1 - v/c)]
520/650 = √[(1 + v/c)/(1 - v/c)]
0.8 = √[(1 + v/c)/(1 - v/c)]
Squaring both sides, we have
0.8² = (1 + v/c)/(1 - v/c)
0.64 = (1 + v/c)/(1 - v/c)
0.64(1 - v/c) = (1 + v/c)
0.64 - 0.64v/c = 1 + v/c
0.64 - 1 = v/c + 0.64v/c
-0.36 = 1.64v/c
-0.2195 = v/c
v = -0.22c
v = -0.22 × 3 × 10⁸ m/s
v = -0.66 × 10⁸ m/s
v = -6.6 × 10⁷ m/s
So, the physicist traveling, according to his own testimony at -6.6 × 10⁷ m/s.
Learn more about doppler shift for light here:
https://brainly.com/question/28499579
#SPJ1
An x-ray photon is scattered by an originally stationary electron. Relative to the frequency of the incident photon, is the frequency of the scattered photon (a) lower. (b) higher.(c) unchanged?
The frequency of the scattered photon will be lower which is option (a).
A quantum is the smallest amount of energy that can be emitted or absorbed in the form of electromagnetic radiation. The energy of radiation absorbed or emitted is directly proportional to the frequency of the radiation.According to the quantum concept of radiation, radiation consists of packets of energy called photons. The photon energy is given by
[tex]E=hv=\frac{hc}{\lambda}[/tex] ....(1)
where 'h' is the Planck's constant
[tex]v=\frac{c}{\lambda}[/tex] ...(2)
where 'v' is the radiation frequency
As x-ray photon is scattered by an electron , there will be loss in the energy of scattered photon.
From equation (1) energy and wavelength have inverse relation which means that due to loss in the energy of scattered photon there will be an increase in the wavelength of scattered photon.
From equation (2) frequency and wavelength have inverse relation due to which increment in the wavelength of scattered photon will lower the frequency of the scattered photon.
Learn about more radiation here :
https://brainly.com/question/25746629
#SPJ4
The average bond dissociation energy of a carbon-carbon bond is 410 kj/mol. What wavelength in nanometers of ultraviolet radiation has an energy of 410 kj/mol?.
The wavelength of nanometers of ultraviolet radiation has an energy of 410 kj/mol is 292 nm.
The energy content of ultraviolet light with a wavelength of 300 nm is approximately 95.3 kcal, Einstein, which is sufficient to spontaneously break carbon-carbon bonds. Wavelength can be calculated using the formula Wavelength Wave Speed, Frequency. Wavelength is usually expressed in meters. The symbol for wavelength is the Greek lambda.
As every engineer knows, calculating energy is easy. The unit of electrical energy is the kilowatt hour kWh. It is determined by multiplying the amount of electricity consumed kilowatts, kW by the number of hours the electricity was consumed. Multiply this by the cost per kWh to get the total energy cost. For methane, you can calculate the energy required to split 1 mole of methane gas into gaseous carbon and hydrogen atoms.
Learn more about Wavelength nanometers here:-https://brainly.com/question/17264798
#SPJ1
A proton, an electron, and a helium nucleus all move at speed v . Rank their de Broglie wavelengths from largest to smallest.
Ranking of de Broglie wavelengths from largest to smallest is electron > proton > helium
De Broglie proposed that because light has both wave and particle properties, matter exhibits both wave and particle properties. This property has been explained as the dual behavior of matter.From his observations, de Broglie derived the relationship between the wavelength and momentum of matter. This relationship is known as de Broglie's relationship
De Broglie's relationship is given by [tex]\lambda=\frac{h}{mv}[/tex] .....(1) , where λ is known as de Broglie wavelength and m is mass , v is velocity , h = Plank’s constant.
From equation (1) wavelength and mass has an inverse relation .
Mass of helium is 4 times the mass of the proton and proton has a greater mass than electron.
According to equation (1) , less the mass higher will be the wavelength
Hence electron having less mass have higher wavelength and then proton and then helium having large mass will have less wavelength .
Thus, order should be electron > proton > helium .
Learn about de brogile wavelength more here :
https://brainly.com/question/16595523
#SPJ4
don is 10 kilometers ahead of jane, and both are traveling forward. how long will it take jane to catch up with don if jane is traveling at 10 k.p.h and don at 6 k.p.h. ?
The time it takes Jane to catch up with Don if Jane is traveling at 10 k.p.h and don at 6 k.p.h is: 2.5 h
The formula and procedure we will use to solve this problem is:
Tr = x/(v2-v1)
Where:
x = separation distanceTr = reach time v2 = velocity of the faster mobilev1 = velocity of the slowest mobileInformation about the problem:
x = 10 kmv2 = 10 km/hv1 = 6 km/hTr=?Applying the reach time formula we get:
Tr = x/(v2-v1)
Tr = 10 km/(10 km/h- 6 km/h)
Tr = 10 km/(4 km/h)
Tr = 2.5 h
What is velocity?It is a physical quantity that indicates the displacement of a mobile per unit of time, it is expressed in units of distance per time, for example (miles/h, km/h).
Learn more about velocity at: brainly.com/question/80295?source=archive
#SPJ4