coil has resistance of 20 ohms and inductance of 0.35 h. compute its reactance and impedance to an alternating current of 25 hz

The cart is pushed to the right by the fans' forcefully pushing air to the left. This exemplifies Newton's third rule, which states that any force acting in one direction will also act in the opposite direction.

So in this case, the air is pushed towards the back of the cart. The direction of the air flow produced by the fan is depicted by the blue lines emanating from the fan in the Fan Cart Physics Gizmo.

The course or path that someone or something travels is referred to as their direction. It can relate to a physical movement, such as moving in the direction of someone or something, or it can refer to a person or an organisation's path of activity or decisions. Because it provides actions and choices focus and direction, direction is necessary for accomplishing goals and objectives.

Setting out a clear vision and goals for an organization, as well as offering instructions on how to attain them, is known as direction. Strong communication abilities, the capacity to inspire and encourage people, and a thorough knowledge of the organisation's advantages and disadvantages are necessary for effective directing. The instructions given to someone for a task or effort are referred to as providing "direction."

To learn more about Direction visit here:

brainly.com/question/30175826

#SPJ4

The potential energy change of the spring when its length changes from 0.21 m to 0.76 m is 0.000182 J  The change in the potential energy of a spring whose stiffness is 910 N/m and has a relaxed length of 0.53 m .

when its length changes from 0.21 m to 0.76 m is 3.37 J.Explanation:Potential energy (PE) of a spring is given by;PE = 1/2 kx²Where k is the spring constant/stiffness and x is the displacement from the equilibrium position of the spring.In this question, the spring's stiffness is given as 910 N/m and its relaxed length is 0.53 m. To find the change in potential energy of the spring when the length of the spring changes from 0.21 m to 0.76 m, we first need to find the displacement (x).The change in length is given as;∆x = 0.76 m - 0.21 m= 0.55 mThe displacement (x) is therefore;x = ∆x - l₀= 0.55 m - 0.53 m= 0.02 mThe spring's stiffness is given as 910 N/m. Therefore, the potential energy change of the spring is given as;PE = 1/2 kx²PE = 1/2 x 910 N/m x (0.02 m)²PE = 0.455 x 0.0004PE = 0.000182 JThe potential energy change of the spring when its length changes from 0.21 m to 0.76 m is 0.000182 J (rounded off to three significant figures).

learn more about  potential energy  here:

https://brainly.com/question/24284560

#SPJ4

the disk has the greatest angular momentum at the end of the 2 seconds, when the net torque becomes constant.

To determine the instant in time when the disk has the greatest angular momentum, we need to use the relationship between torque and angular momentum:

τ = dL/dt

where τ is the net torque, L is the angular momentum, and t is time.

We can see from the graph that the net torque on the disk increases linearly with time for the first 2 seconds and then remains constant at 0.6 Nm. Since the disk is initially at rest, its initial angular momentum is zero.

During the first 2 seconds, the angular momentum of the disk increases as a result of the torque acting on it. We can integrate the torque over time to find the change in angular momentum:

ΔL = ∫τ dt = ∫(0.2t) dt = 0.1[tex]t^2[/tex]

So, at any time t during the first 2 seconds, the angular momentum of the disk is given by:

L = 0.1[tex]t^2[/tex]

The angular momentum of the disk will be greatest at the end of the 2 seconds, when the torque stops changing and reaches its constant value of 0.6 Nm. At this point, the angular momentum will be:

L = 0.1[tex](2)^2[/tex] = 0.4 kg [tex]m^2[/tex]/s

Learn more about angular momentum here:

https://brainly.com/question/29897173

#SPJ1

The magnitude of the linear acceleration of the falling bucket is 9.8 m/s^2. The magnitude of the linear acceleration of the falling bucket is equal to the acceleration due to gravity, which is 9.8 m/s^2.

A bucket with a mass of a kg is attached to a cylindrical, massive pulley with a radius of b m. The bucket starts from rest and falls for c s into a well. The tension in the rope is d N. To find the magnitude of the linear acceleration of the falling bucket, we can use the following equation:

F_net = ma

Where F_net is the net force acting on the bucket, m is the mass of the bucket, and a is the acceleration of the bucket.

We can find the net force acting on the bucket using the tension in the rope: F_net = T - mg, where T is the tension in the rope, and mg is the weight of the bucket. Since the bucket is falling, we know that a = -g (where g is the acceleration due to gravity, which is a constant -9.8 m/s^2). So we can set up the following equation: T - mg = maT - mg = m(-g)T = mg - mgT = m(-g)T = -mg

Know more about linear acceleration here:

https://brainly.com/question/13723307

#SPJ11

The weather map shows some conditions in the atmosphere at noon on a particular day OB. In the northeast

The atmospheric pressure is strongest at sea level and lowers as you ascend into the atmosphere. At sea level, typical air pressure ranges from 800 to 1050 millibars.

High-pressure regions are often areas of fair, stable weather. Low-pressure zones have a thin atmosphere. Winds sweep inward towards these regions. This causes the air to ascend, resulting in clouds and condensation.

Since warm air rises, areas with warmer air frequently have lower pressure. They are known as low pressure systems. High pressure systems are areas with high air pressure.

learn more about atmospheric pressure

https://brainly.com/question/15215203

#SPJ1

The magnitude of the magnetic flux through each turn of the coil at the instant when the current is 3.60 A is 3.72×10⁻⁶ Wb.

The quantity of magnetic field traveling through a specific region or surface is measured by magnetic flux. It is described as the result of the area that the magnetic field travels through and its magnitude, where the area is perpendicular to the field's direction. The Weber is the magnetic flux SI unit (Wb)

Given that,

EMF = 18.0 mV = 0.018 V

N = 484 turns

(dΦ/dt) = 10.0 A/s

I = 3.60 A

The equation that relates the electromotive force (EMF) induced in a coil to the rate of change of magnetic flux is:

EMF = -N(dΦ/dt)

Rearranging the equation to solve for Φ:

Φ = -EMF/(N(d/dt))

   = -(0.018 V)/(484(10.0 ))

  = -3.72×10⁻⁶ Wb

The magnitude of the magnetic flux through each turn of the coil at the instant when the current is 3.60 A is 3.72×10⁻⁶ Wb.

To learn more about Magnetic flux, refer to:

https://brainly.com/question/29221352

#SPJ4

There is no information given about the initial and final angular momenta, so the magnitude of the angular impulse cannot be determined.

When answering questions on Brainly, one should always strive to be factually accurate, professional, and friendly, as well as be concise and not provide extraneous amounts of detail. It is important to use relevant terms in the answer as well. Here is an example answer to the given student question:What are the magnitude and direction of the angular momentum about the center of the disk?

The formula for calculating the magnitude and direction of angular momentum is given by:L = Iωwhere L is the angular momentum, I is the moment of inertia of the object, and ω is the angular velocity of the object.In this case, the disk is rotating around its center, so the angular momentum will also be about the center of the disk. Since there are no external torques acting on the disk, the angular momentum will be conserved.

Therefore, we can use the formula:L1 = L2orI1ω1 = I2ω2since the moment of inertia of the disk remains constant. Thus, we can calculate the magnitude of the angular momentum about the center of the disk by using the initial and final angular velocities:∣iM∣= Iω= Iω0where ω0 is the initial angular velocity. However, there is no information given about the angular velocity, so the magnitude of the angular momentum cannot be determined.

The string is pulled for 0.15 s. What are the magnitude and direction of the angular impulse r CMΔt applied to the disk during this time?The formula for calculating the angular impulse is given by:rΔp = rΔLwhere r is the distance from the axis of rotation to the point of application of the force, Δp is the linear impulse, and ΔL is the change in angular momentum.In this case, the force is applied to the edge of the disk, so the distance r is equal to the radius of the disk.

Since the force is applied for 0.15 s, we can calculate the linear impulse as:Δp = FΔtwhere F is the force applied to the edge of the disk. However, there is no information given about the force, so the linear impulse cannot be determined.Since there is no external torque acting on the disk, the angular impulse will be equal to the change in angular momentum:∣Fcm∣Δt= ΔLTherefore, the magnitude of the angular impulse is equal to the change in angular momentum.

To learn more about : angular

https://brainly.com/question/13014974

#SPJ11

The shortest length of the runway that will be needed for the American Airlines Boeing 787 to take off is 902 meters.

To determine the shortest length runway needed for the American Airlines Boeing 787 to take off, we can use the formula for acceleration:

a = F_net / m

where a is the acceleration, F_net is the net force, and m is the mass of the aircraft.

We know that each engine provides 321 kN of thrust, and there are two engines, so the net force is:

F_net = 2 * 321 kN = 642 kN

We can convert this to Newtons:

F_net = 642,000 N

We also know the mass of the aircraft:

m = 251,000 kg

Substituting these values into the formula for acceleration, we get:

a = F_net / m = 642,000 N / 251,000 kg

= 2.56 m/s^2

To determine the minimum runway length needed, we can use the formula for distance:

d = (v_f^2 - v_i^2) / (2 * a)

where d is the distance, v_f is the final velocity (takeoff speed), and v_i is the initial velocity (zero).

Substituting the values we know, we get:

d = (66.8 m/s)^2 / (2 * 2.56 m/s^2)

= 902 meters

To learn more about Airlines Boeing

https://brainly.com/question/14956599

#SPJ4

The sieving would work best when really small pieces and fibers of paper are mixed in with sand and need to be removed.

When really small pieces and fibers of paper are mixed in with sand and need to be removed, the separation process that would probably work best is sieving.What is sieving?Sieving is a physical separation process that separates solid particles based on their particle size.

This process can be used to separate a variety of materials, including powders, grains, and solids.Sieving is the process of separating materials based on their size.

A sieve is a device that consists of a mesh or net that is used to separate larger particles from smaller particles. When a mixture of particles is poured onto a sieve, the smaller particles fall through the mesh, while the larger particles remain on top of the mesh.

This process is used to remove impurities from a mixture and to separate materials with different particle sizes.

To learn more about : fibers

https://brainly.com/question/30614297

#SPJ11

We can solve this problem applying "Coulomb's Law" which states-

[tex]\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{F_{(air)} = K\times \dfrac{ q_1 q_2}{r^2}} \\ [/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\star\:\sf\underline{F_{(air)} = \dfrac{1}{4\pi \epsilon_{0} } \dfrac{q_1q_2}{r^2} }\\ [/tex]

Where-

As per question, we are given that -

Now that required values are given, so we can substitute the values into the formula and solve for Force -

[tex] \:\:\:\:\:\:\:\:\:\:\star\:\sf\underline{F_{(air)} = \dfrac{1}{4\pi \epsilon_{0} } \dfrac{q_1q_2}{r^2} }\\ [/tex]

[tex] \:\:\:\:\:\:\:\longrightarrow \sf Force_{(air)}= 9\times 10^9 \times \dfrac{0.004\times -0.02 }{(6)^2}\\ [/tex]

[tex] \:\:\:\:\:\:\:\longrightarrow \sf Force_{(air)}= -9\times 10^9 \times\dfrac{0.00008}{36}\\ [/tex]

[tex] \:\:\:\:\:\:\:\longrightarrow \sf Force_{(air)} = -9\times 10^9 \times 2.2\times 10^{-6}\\ [/tex]

[tex] \:\:\:\:\:\:\:\longrightarrow \sf \underline{Force_{(air)} = -19800\:N}\\ [/tex]

To find the impulse of the car, we can use the formula:

impulse = force x time

We know the mass of the car is 20 kg, and the change in velocity is 30 m/s - 10 m/s = 20 m/s. We can use the impulse-momentum theorem, which states that impulse equals the change in momentum:

impulse = change in momentum = mass x change in velocity

So, impulse = 20 kg x 20 m/s = 400 Ns

To find the time it took the car to stop, we can rearrange the impulse formula to solve for time:

time = impulse / force

Plugging in the values, we get:

time = 400 Ns / 200 N = 2 seconds

Therefore, the impulse of the car was 400 Ns, and it took 2 seconds for the car to stop with an applied force of 200N.

Changes in the core, seams, or surface of a baseball could make it travel farther than normal, leading to suspicions of foul play. However, any alterations to baseballs are closely monitored and must be approved by Major League Baseball to ensure fairness in the game.

There are a few changes that could potentially lead to baseballs traveling farther than normal:

Changes in the baseball's core: The core of a baseball is made up of rubber and cork, and a change in the density of these materials could potentially make the ball travel farther.

Changes in the baseball's seams: The seams on a baseball can affect its flight path, and a change in the height, width, or thickness of the seams could affect the ball's trajectory and make it travel farther.

Changes in the baseball's surface: The surface of a baseball can affect its aerodynamics, and a change in the texture or smoothness of the surface could potentially make the ball travel farther.

It's worth noting that changes in the baseballs are closely monitored by Major League Baseball, and any alterations must be approved by the league before they can be used in games. If a change is suspected to be causing an increase in home runs, the league would investigate and take appropriate action to ensure that the game remains fair and balanced.

Learn more about Baseball :

https://brainly.com/question/29783871

#SPJ4

Since the box is not accelerating in any direction, Person 1 must be pulling with a force of 100 N in the opposite direction.

Since the box is not accelerating in any direction, the sum of the forces in each direction must be zero.

In the x-direction, there are no forces since the ice offers no resistance. In the y-direction, the forces balance out.

Let F1 be the force that person 1 is pulling with.

F1(sin 90) + 100(sin 90) = 0

F1 = 0 - 100(1)

F1 = -100 N

Learn more about forces at: https://brainly.com/question/12970081

#SPJ1

When pressure checking a rebreathing circuit, it is important to keep your thumb over the end of the hose until the pressure is fully released from the system to prevent a hazardous situation.

Rebreathing circuits are used in anesthesia delivery systems to recirculate exhaled gases containing anesthetic agents and oxygen.

The following steps should be taken in pressure checking a rebreathing circuit:

Ensure that the oxygen flush valve is in the closed position and the ventilator is not connected to the circuit. Plug one end of the circuit, hold the circuit in the palm of your hand and squeeze the bag to create positive pressure. Observe the bag for any collapse, and at the same time, listen for any hissing sound indicating leakage or a leak.

If a leak is detected, remove the circuit from service, and troubleshoot the issue by tracing the leak through the system using a leak tester, a tool that detects leaks in the system's various components.

When the pressure check is finished, it is important to keep your thumb over the end of the hose until the pressure is fully released from the system because if the pressure is released without doing so, the hose could whip around due to the pressure released, leading to a hazardous situation.

For more such questions on circuit, click on:

https://brainly.com/question/2969220

#SPJ11

The discovery of redshifted light from stars and galaxies is an important piece of evidence in favor of the Big Bang hypothesis

Redshift is the observation that the light emitted by stars is moved to longer wavelengths. The reason for this phenomenon is that as the cosmos expands, light's wavelength gets stretched out, giving it the appearance of being "redder". The universe should be expanding, and as a result, the light from far-off objects in the cosmos should be redshifted, according to one of the main predictions of the Big Bang hypothesis.

Many studies of far-off galaxies, stars, and other celestial objects have supported this hypothesis. As a result, the discovery of redshifted light from stars and galaxies is an important piece of evidence in favor of the Big Bang hypothesis, offering strong confirmation of one of its most fundamental predictions.

To learn more about redshift light, refer to:

https://brainly.com/question/2289242

#SPJ4

The tension in the horizontal string that whirls a 2.0- kg toy in a circle of radius 2.7 m when it moves at 3.2 m/s on an icy surface is 7.5 N.

When calculating the tension in a horizontal string that whirls a 2.0- kg toy in a circle of radius 2.7 m when it moves at 3.2 m/s on an icy surface, there are various concepts to understand. Below are the steps to solve the given problem:

Step 1: Draw a free body diagram of the toy attached to the horizontal string. When an object is moving in a circular path, there must be a force acting on the object to make it move in a circle. In this case, the horizontal string exerts a force on the toy.

Step 2: Write down the formula for the force required to move an object in a circular path. The formula is given as F = m(v^2/r), where F is the force required, m is the mass of the object, v is the velocity of the object, and r is the radius of the circle.

Step 3: Substitute the given values in the above formula.

The mass of the toy is 2.0 kg, its velocity is 3.2 m/s, and the radius of the circle is 2.7 m.

F = (2.0 kg)(3.2 m/s)^2 / 2.7 m

= 7.5 N.

The tension in the horizontal string is 7.5 N.

To learn more about : tension

https://brainly.com/question/24994188

#SPJ11

The power rating of a certain kind of lightbulb carrying 1.0 ampere of current when connected to a 120 volt AC circuit is 120 watts.

How to calculate the power rating of a lightbulb?The power rating of a lightbulb can be calculated using the formula:Power = Current × VoltageP = I × Vwhere P is the power in watts, I is the current in amperes, and V is the voltage in volts.Given,I = 1.0 ampereV = 120 voltsSubstitute the given values into the formula:P = I × VP = 1.0 A × 120 VP = 120 WTherefore, the power rating of the lightbulb is 120 watts.  The power rating of the lightbulb can be calculated using the formula P = IV, where P is the power, I is the current, and V is the voltage. In this case, the current (I) is 1.0 ampere and the voltage (V) is 120 volts. Therefore, the power rating (P) of the lightbulb is: P = (1.0 A) × (120 V) = 120 watts

learn more about  current  here:

https://brainly.com/question/13076734

#SPJ4

The formula Acceleration= 160401 from Physics with Charlie a (10) a (35) = 2 1. fraca(10)a(35)=frac21 is used to get the train's acceleration.

Finally, we may say that acceleration is indeed a fundamental idea in physics that explains how things move. The rate at which an item changes either trajectory or velocity, or both, is referred to as its magnitude of acceleration. Using the equation a = (v - u) / t, one can easily determine the magnitude of acceleration.

|v| =(output + y2) is the formula to calculate a vector's magnitude in two dimensions (x, y). The Pythagorean theorem is the foundation of this formula.

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ1

The centripetal acceleration of the car rounding the curve is 6.4 m/s².

The following formula determines the centripetal acceleration of an item travelling in a circular path:

a = v² / r

a = v² / r

a = (16 m/s)² / 40 m

a = 6.4 m/s²

Acceleration is the rate of change of velocity. It is a vector quantity that describes how much an object's velocity changes per unit of time. Acceleration can be positive or negative, depending on whether an object is speeding up or slowing down, respectively. Acceleration can also occur when the direction of an object's motion changes, even if its speed remains constant. This is called centripetal acceleration and is responsible for the circular motion of objects, such as a car turning a corner or a planet orbiting a star.

Acceleration plays an important role in many areas of physics and engineering, including mechanics, electromagnetism, and relativity. It is also crucial for understanding everyday phenomena, such as the motion of vehicles, the behavior of roller coasters, and the forces experienced by astronauts during spaceflight.

To learn more about Acceleration visit here:

brainly.com/question/30660316

#SPJ4

This lab helped us understand the concept of density and how to determine it using displacement of water. The Density of Objects chart clearly shows the mass, volume, and density of each object. By making improvements to the lab procedure, we can ensure safer and more efficient experiments in the future.

Lab Report: Displacement and Density Experiment

Section I: Overview of Investigation

The purpose of this lab was to determine the density of various objects using displacement of water. The procedure involved measuring the volume of water displaced by each object and weighing the objects to get their mass. By dividing mass by volume, we calculated the density of each object.

To complete the lab, we followed a set of steps. First, we reviewed the lab assignments and made sure we had a good understanding of the experiment. We also familiarized ourselves with the safety equipment and their uses in the lab, such as the location of fire extinguishers. Next, we prepared the experiment by gathering all the necessary materials and writing notes on a notebook about the experiment. We reviewed the data sheets of chemicals and materials safety before proceeding. Then, we put on all the necessary safety equipment and had a complete understanding of the experiment before beginning.

Section II: Observations and Conclusions

To show what we learned in this lab, we created a chart titled "Density of Objects." The chart has appropriate labels, including a descriptive title above the table, column and row labels that describe the data, and units of measurement.

Density of Objects

Object | Mass (g) | Volume (mL) | Density (g/mL)

Object 1 | 25.0 | 10.0 | 2.50

Object 2 | 14.5 | 5.0 | 2.90

Object 3 | 32.0 | 15.0 | 2.13

Based on our observations, we concluded that the density of each object was different. Object 2 had the highest density, while Object 3 had the lowest density. We also found that the density of an object can be determined using displacement of water.

If we could repeat the lab and make it better, we would optimize the space for lab equipment and label places to put minor equipment. We would also have drawers under the lab counter and train new researchers before they use the reactives and the lab equipment. These changes would improve the efficiency and safety of the experiment.

In conclusion, this lab helped us understand the concept of density and how to determine it using displacement of water. The Density of Objects chart clearly shows the mass, volume, and density of each object. By making improvements to the lab procedure, we can ensure safer and more efficient experiments in the future.

learn more about lab report: https://brainly.com/question/29500102

#SPJ1

The second projectile was 2 times faster than the first projectile, as its initial velocity was twice that of the first projectile.

Let's assume that the first projectile had an initial velocity of v1, and the second projectile had an initial velocity of v2.

m1v1 = (m1 + m2)v2,

v1 = 2v2

This means that the initial velocity of the second projectile was twice that of the first projectile.

To find out the maximum height reached by the second projectile, we can use the conservation of energy:

1/2 m1 v2^2 = (m1 + m2)gh

h' = 2h = 5.2 cm

Substituting the values in the equation, we get:

1/2 m1 v2^2 = (m1 + m2)gh'

Simplifying, we get:

v2^2 = 2gh'

Substituting the values, we get:

v2^2 = 2 x 9.81 x 0.052

v2 = 0.725 m/s.

A projectile is an object that is propelled through the air and follows a curved trajectory under the influence of gravity. Examples of projectiles include bullets, cannonballs, and rockets. A projectile is typically launched with an initial velocity and then moves through the air under the influence of gravity alone.

The trajectory of a projectile is determined by its initial velocity, angle of launch, and the force of gravity. As the projectile travels through the air, it experiences a downward force due to gravity, which causes it to follow a curved path called a parabola. The maximum height of the projectile occurs at the apex of the parabolic path, where the vertical component of the velocity is zero.

To learn more about Projectile visit here:

brainly.com/question/11422992

#SPJ4

The frequency that results in the maximum current passing through the circuit is 5,278 Hz.

The resonance frequency of a series RLC circuit is given by:

f = 1 / (2π√(LC))

f = 1 / (2π√(LC))

f = 1 / (2π√(130 x [tex]10^{-3}[/tex] x 7 x [tex]10^{-6}[/tex]))

f = 1 / (2π√(0.910 x [tex]10^{-9}[/tex]))

f = 1 / (2π x 0.00003018)

f = 5,278 Hz

An RLC circuit is an electrical circuit that consists of a resistor (R), an inductor (L), and a capacitor (C) connected in series or parallel. These components are called passive components because they do not add energy to the circuit but rather store or dissipate energy. The behavior of the RLC circuit depends on the values of the resistor, inductor, and capacitor, as well as the frequency of the applied voltage.

When a voltage is applied to the RLC circuit, the current flowing through the circuit is governed by the interplay between the three components. The resistor opposes the flow of current, the inductor stores energy in the form of a magnetic field, and the capacitor stores energy in the form of an electric field. At certain frequencies, the RLC circuit can resonate, meaning that the energy stored in the inductor and capacitor is exchanged back and forth, leading to a large amplitude of current and voltage in the circuit.

To know more about RLC circuit visit here:

brainly.com/question/13092725

#SPJ4

The final velocity in the y direction will be greater than the initial velocity. This is why basketball players need to shoot the ball with enough initial velocity to overcome the effect of gravity and ensure that the ball reaches the basket.

Basketball motion shows projectile motion because when the ball is released, it travels through the air in a curved path due to the forces acting upon it. These forces include gravity and air resistance, which cause the ball to follow a parabolic trajectory. During projectile motion, there is an acceleration in the x direction of zero since there is no force acting on the ball in that direction. However, there is an acceleration in the y direction due to the force of gravity. This acceleration is always downward and is equal to 9.81 m/s^2.

The final and initial velocities in the x direction do not change during projectile motion since there is no acceleration in that direction. However, in the y direction, the initial velocity is not equal to the final velocity since the ball is constantly accelerating due to gravity.

To learn more about Velocity :

https://brainly.com/question/80295?source=archive

#SPJ11

A thermodynamic cycle using air as the working fluid consists of four processes. These four processes make up the complete thermodynamic cycle, with air as the working fluid.

The cycle is designed to convert heat into work and is an essential part of many practical applications, such as heat engines and refrigeration systems. These processes are:

1. Isentropic compression: In this process, the air is compressed adiabatically (without heat transfer) and reversibly. The temperature and pressure of the air increase during this process, and the entropy remains constant.

2. Constant-pressure heat addition: During this process, heat is added to the air at a constant pressure, causing the temperature and specific volume of the air to increase. The air expands during this process, and work is done by the air on its surroundings.

3. Isentropic expansion: In this process, the air expands adiabatically and reversibly, which means that there is no heat transfer, and the entropy remains constant. The temperature and pressure of the air decrease during this process and work are done by the air on its surroundings.

4. Constant-volume heat rejection: Finally, in this process, heat is removed from the air at a constant volume, causing the temperature and pressure of the air to decrease. The specific volume remains constant during this process.

to know more about thermodynamic cycle refer here:

https://brainly.com/question/30630564#

#SPJ11

Answer: The forensic toxicologist should request to check the gastric contents because there may still be undigested pills which can help identify the poison used in the poisoning.

Explanation:

Transition 1 contributes to an absorption spectrum, while transitions 2 and 3 contribute to an emission spectrum.

The energy of the emitted or absorbed photon is directly proportional to the frequency of the photon, as given by the equation E = hf.

An emission spectrum is produced when an atom emits light, while an absorption spectrum is produced when an atom absorbs light. In an emission spectrum, the wavelengths of light emitted by the atom are characteristic of the atom's energy levels, and appear as bright lines on a dark background.

In an absorption spectrum, the wavelengths of light absorbed by the atom are missing from a continuous spectrum, appearing as dark lines on a bright background.

To know more about spectrum,visit:

https://brainly.com/question/6836691

#SPJ1

Energy relates to both heat and temperature, and as thermal equilibrium is reached, the system has less ability to do work.

"false", "thermal equilibrium", "Heat".Statement that is false from the options provided is:Thermal energy always flows from colder objects to warmer objects.What is thermal equilibrium?Thermal equilibrium is defined as the state of a system in which its temperature is uniform and unchanging over time. Heat is the transfer of thermal energy from one substance to another. Thermal energy relates to both heat and temperature, and as thermal equilibrium is reached, the system has less ability to do work.

Learn more about thermal equilibrium Energy here:

https://brainly.com/question/14132618

#SPJ4

The hill must be at least 30 meters high for the riders to experience weightlessness at the top of the loop.

Let h be the height of the hill, and let v be the velocity of the roller coaster at the top of the loop. At the top of the loop, the gravitational force and the normal force add up to zero:

mg + N = 0

where m is the mass of the roller coaster, g is the acceleration due to gravity, and N is the normal force.

The centripetal force required to keep the roller coaster moving in a circle of radius R is, Fc = mv²/R, where Fc is the centripetal force.

At the top of the loop, the centripetal force is equal to the weight of the roller coaster, Fc = mg

Setting these two expressions for Fc equal to each other,

mv²/R = mg

Solving for v,

v = sqrt(gR)

Substituting this expression for v into the conservation of energy equation, mgh = (1/2)mv² + mgR, where h is the height of the hill.

Substituting the expression for v,

mgh = (1/2)mgR + mgR

Solving for h,

h = 3R/2

Substituting the given value of R = 20 m, h = 30 m.

To know more about roller coaster, here

brainly.com/question/29307406

#SPJ4

In an ice sailcraft that is stalled on a frozen lake on a windless day, if all the wind bounces backward from the sail, the craft will not be set in motion.

This is because the direction of the wind would be the same as that of the sail, resulting in a situation where the sail will not be able to catch any wind.

If all of the wind bounces backward off the sail in the given situation, there will be no force exerted on the sail to cause motion. The fan may cause some air movement, but the sailcraft would stay immobile if there was no wind to give lift.

Therefore, the craft will not move in any direction.

For more such questions on sailcraft, click on:

https://brainly.com/question/13731400

#SPJ11

The linear displacement of a car wheel of radius 9.0 m as it moves through an angular displacement of 3.0 rad is 27 meters.

Explanation: Angular displacement is the angle between the initial and final positions of a rotating body. If a rotating body moves from one position to another, it undergoes angular displacement. Linear displacement, on the other hand, is the distance moved in a straight line. The distance between two points in a straight line is called linear displacement. The angular displacement formula is given byθ = s / rwhereθ is the angular displacement of the car wheel, s is the linear displacement, and r is the radius of the wheel. Rearranging the formula above to find s, we have; s = θ * r Now we can substitute the values given in the question; s = 3.0 rad * 9.0 m = 27 m Therefore, the linear displacement of the car wheel of radius 9.0 m as it moves through an angular displacement of 3.0 rad is 27 meters.
The linear displacement of a car wheel can be calculated using the formula: linear displacement = radius × angular displacement. In this case, the radius is 9.0 m and the angular displacement is 3.0 rad. Therefore, the linear displacement is 9.0 m × 3.0 rad = 27.0 m.

Learn more about  Angular displacement here:

https://brainly.com/question/26483834

#SPJ4