coal mining environmental impact
Explain what impact coal mining has and what it affects

CAN SOMEONE PLS HELP THANK U

Answers

Answer 1

Answer:

There are significant environmental impacts associated with coal mining and use. It could require the removal of massive amounts of top soil, leading to erosion, loss of habitat and pollution. Coal mining causes acid mine drainage, which causes heavy metals to dissolve and seep into ground and surface water.

Explanation:


Related Questions

Select the correct answer.

Which statement best describes how chemical equations demonstrate conservation of mass?

A.
The number of reactants is the same as the number of products.
B.
The compounds are the same on each side of the reaction.
C.
The number of atoms of each element is the same on each side of the equation.
D.
The state of matter is the same on each side of the equation.

Answers

"C" is correct.

The Law of Conservation of Mass states that matter can be neither created nor destroyed. This is evident in chemical equations as you will always start and end with the same amount of atoms of every element. They are all still there; they have just been rearranged.

Answer: C) The number of atoms of each element is the same on each side of the equation.

Explanation: Mass cannot be created nor destroyed.

1.The symbol of an atom changes when the number of _______
changes.
2.The net charge of an atom depends on ___________ and
_________.
3.The atom is neutral when ________ and _________ are equal.
4.The mass number of an atom depends on __________ and
_________.

Answers

Answer:

1. proton

2. electrons and protons

3. protons and electrons

4. protons and neutrons

Explanation:

PLEASE HELP
The theory of plate tectonics is supported by evidence that crustal plates move relative to each other. How does this observation support the theory of plate tectonics?
It suggests that plates are dragged around by ocean currents.
It suggests that plates are dragged around by air currents.
It suggests that plates can move independently of one another.
It suggests that plates cannot move independently of one another.

Answers

Answer:

non independantly

Explanation:

The half life of potassium 40 is approximately 1.25 billion years. An igneous rock is found to contain about 1/4 of its original mass of potassium 40. The approximate age of the rock is _____ billion years.

Answers

Answer:

2.5 billion years

Explanation:

a ceiling fan's blades collect dust faster than other objects in a room. the constant pushing and rubbing against the air provide a cool breeze for the people in the room. what causes the ceiling fan´s blade to collect dust so quickly.

Answers

As the blades rotate, they experience frictional forces as they `rub' against the air; this knocks electrons around, causing the blades to build up a net charge. The charged dust particles then stick to the charged areas of the blades. "The leading edge of the blades usually develops the thickest layer of dust.

To solve this we must be knowing each and every concept related to dust. Therefore,  frictional forces allow the ceiling fan´s blade to collect dust so quickly.

What is dust?

Dust stirred up by automobiles on the road may account for 33% overall air pollution. Deposits of vehicle or commercial exhaust gas, particles through tire and braking wear, dust from paved streets or potholes, plus dust from building sites all contribute to road dust.

As the blades revolve, frictional forces cause them to 'rub' against the air, knocking electrons around and allowing the blades to accumulate a net charge. The electrified dust particles are subsequently attracted to the charged portions of the blades. Typically, the sharp end of the blades creates the heaviest coating of dust.

Therefore,  frictional forces allow the ceiling fan´s blade to collect dust so quickly.

To know more about dust, here:

https://brainly.com/question/29761987

#SPJ2

A chemical equation representing the reaction of water (HOH) and hydrochloride acid (HCI) is shown.
HOH + HCl + Cl + H2O
Which of the following statements best explains the chemical action of the reactants in the equation?

Answers

Answer:

That is Hydrolysis reaction.

[tex]HCl _{(aq)} \: + \: _{(aq)} \: - - > \: H ^{ + }_{(aq)} \: + \: Cl {}^{ - } _{(aq)}[/tex]

A student prepares four different aqueous NaCl solutions according to the table. Which solution will have the highest molarity?

Answers

Answer:

what did you end up guessing

Explanation:

If 34.2 g of NaOH are dissolved in water to make a 750 mL solution, what is the molarity of the solution?

Answers

Answer:

1.14 M

Explanation:

First divide the mass of NaOH by the molar mass of NaOH. Then divide by the volume to get molarity.

34.2 g / 39.997 g/mol = 0.855 mol NaOH

0.855 mol NaOH / 0.750 L = 1.14 M NaOH

During a tug-of-war, the rope accelerates towards the left. What is true about the forces acting on the rope?

Answers

Explanation:

Forces are given many names, such as push, pull, thrust, lift, weight, friction, and tension. Traditionally, forces have been grouped into several categories and given names relating to their source, how they are transmitted, or their effects. The most important of these categories are discussed in this section, together with some interesting applications. Further examples of forces are discussed later in this text.

HELP a #QUEEN out pls??


Type the correct answer in each box.

Balance the equation.


_____SiO2 + ______CaC2 → _____Si + _______CaO + _____CO2

Answers

The coefficients, in order of the blanks, are 5, 2, 5, 2, 4.

How can the strength of an acid be determined using titration? (100 POINTS!)

Answers

Answer:

Explanation:

A titration in general is used to determine the concentration of something with a solution of known solution. For acid, a base solution of known concentration is added slowly. The end-point is determined by using a pH indicator. When the acid is neutralized at the end, note the amount of base solution used and the strength of acid can be calculated.

Note that the quantity of base solution utilised and the acid strength can be estimated after the acid has been neutralised.

What is titration?

Titration is a method of chemical analysis where the quantity of a sample's constituents is established by adding a precisely measured amount of something else with which the component that is wanted will react in a specific, known proportion.

A burette, which is essentially a long, graded measurement tube with a stopper and a tube for injection at its bottom end, is used to gradually administer a standard solution of titrating reagent, and titrant, to a specified concentration. When the point of equal value is achieved, the addition is terminated. Note that the quantity of base solution utilised and the acid strength can be estimated after the acid has been neutralised.

Therefore, note that the quantity of base solution utilised and the acid strength can be estimated after the acid has been neutralised.

To know more about titration, here:

https://brainly.com/question/24704707

#SPJ2

1. The production of a slightly soluble solid compound in a double-
displacement reaction results in the formation of a
a. gas.
b. precipitate.
C. combustion reaction.
d. halogen.

Answers

Answer: precipitate

Explanation:

Pt4 science......

Select correct answer ♡ !

Answers

A is correct!

2 electrons in the outer shell!

Mark with crown please!

Predict what happens when tin metal is placed into
a solution of nickel(II) iodide.

A. Tin(II) iodide forms
B. Tin metal dissolves
C. Nothing
D. Both a and b happen
E. Nickel is plated onto tin

Answers

Answer:

I would say A but I'm not sure

When tin metal is placed into a solution of nickel (II) iodide then nothing will occur.

What is reactivity series?

Reactivity series of the metals tells about the increasing or decreasing orders of the reactivity of the metals.

According to the reactivity series, reactivity of nickel metal is more than the tin metal. So, if we add tin metal in the solution of nickel (II) iodide then no reaction occurs. Because the reactivity of tin is less as compare to nickel metal so it is not possible for tin to replace the nickel metal and get dissolve.

Hence, option (C) is correct i.e. nothing.

To know more about reactivity series, visit the below link:
https://brainly.com/question/17469010

Can you identify what object is being represented by the model on the right?

basketball

cell

Earth


The answer is. B. Cell

Answers

Earth...............

Answer:

Cell lol

Explanation:

answer B

Compare a low-dose rate internal radiation treatment to a high dose rate internal treatment. What do you think are the positives and negatives of each?

Answers

Internal radiation is also called brachytherapy. A radioactive implant is put inside the body in or near the tumor. Getting the implant placed is usually a painless procedure. Depending on your type of cancer and treatment plan, you might get a temporary or a permanent implant. Internal radiation therapy (brachytherapy) allows a higher dose of radiation in a smaller area than might be possible with external radiation treatment. It uses a radiation source that’s usually sealed in a small holder called an implant. Different types of implants may be called pellets, seeds, ribbons, wires, needles, capsules, balloons, or tubes. No matter which type of implant is used, it is placed in your body, very close to or inside the tumor. This way the radiation harms as few normal cells as possible.

During intracavitary radiation, the radioactive source is placed in a body cavity (space) , such as the rectum or uterus.
With interstitial radiation, the implants are placed in or near the tumor, but not in a body cavity. The implant procedure is usually done in a hospital operating room designed to keep the radiation inside the room. You’ll get anesthesia, which may be either general (where drugs are used to put you into a deep sleep so that you don’t feel pain) or local (where part of your body is numbed).

One or more implants is put into the body cavity or tissue with an applicator, usually a metal tube or a plastic tube called a catheter. Imaging tests (an x-ray, ultrasound, MRI, or CT scan) are usually used during the procedure to find the exact place the implant needs to go.

Before being placed, implants are kept in containers that hold the radiation inside so it can’t affect others. The health professionals handling the implants may wear special gear that protects them from exposure once the implants are taken out of the container. High-dose-rate (HDR) brachytherapy allows a person to be treated for several minutes at a time with a powerful radioactive source that’s put in the applicator. The source is removed after 10 to 20 minutes. This may be repeated twice a day over a few days, or once a day over the course of a few weeks. The radioactive material is not left in your body. The applicator might be left in place between treatments, or it might be put in before each treatment.

People getting HDR sometimes stay in the hospital if it involves multiple day treatments and if the applicator is left in place. There may be special precautions to take after the treatment, so be sure to talk to the cancer care team about this. In this approach, the implant gives off lower doses of radiation over a longer period.

Some implants are left in from 1 to a few days and then removed. You’ll probably have to stay in the hospital, sometimes in a special room, during treatment. For larger implants, you might have to stay in bed and lie still to keep it from moving.

Some smaller implants (such as the seeds or pellets) are left in place and never taken out. Over the course of several weeks they stop giving off radiation. The seeds or pellets are about the size of rice grains and rarely cause problems. If your implants are to be left in, you may be able to go home the same day they’re put in. There may be special precautions to take, so be sure to talk to the cancer care team about this.




Determine the ions of ammonium, in 870.4x10-23 grams of (NH4)3PO4. Round the results to the tenths.

Answers

Answer: if your trying to say what 4x10-23 is the answer is 17

and if ur also trying to say whats 870.4x10-23 the answer is 8681 have a nice day!

Explanation:

also and what is (NH4)3PO4 if its a file code or link your not allowed to post that

PLEASE HELP!! 10 POINTS!
what could the fourth quantum number of a 2s^2 electron be?

Answers

Answer:

D. ms=+1/2.

Explanation:

Hello there!

In this case, since the quantum numbers are known as:

* Principal quantum number (n) which cannot be zero. The allowed values of n are therefore 1, 2, 3, 4, and so on.

* Angular quantum number (l) is able to be any integer between 0 and n-1. If n = 2, for example, l can be either 0 or 1.

* Magnetic quantum number (m) is able to be any integer between -l and +l. If l = 3, m can be either -3, -2, -1, 0, +1, +2 or +3.

* Spin Quantum Number (ms): ms = +½ or -½. Accounts for the orientation of the spin axis of an electron as it is able to spin in only one of two directions.

Thus, since the fourth quantum number is ms, spin, we infer that the answer is D. ms=+1/2 because it represents the positive spin on 2s^2.

Best regards!

Answer: ms = +1/2

Explanation: a pex

What is the job or function of cell walls in plant cellls

Answers

Answer:

The cell wall surrounds the plasma membrane of plant cells and provides tensile strength and protection against mechanical and osmotic stress. It also allows cells to develop turgor pressure, which is the pressure of the cell contents against the cell wall.

Explanation:

ion

The cell walls in plant cells provide tensile strength and protection against mechanical and osmotic stress. It also allows cells to develop turgor pressure, which is the pressure of the cell contents against the cell wall.
Source:Nature.com

Sodium chlorate is used to produce yellow fireworks. Heating sodium chlorate creates oxygen and sodium chloride. How many moles of sodium chlorate is needed to produce 5.70 moles of oxygen?

Answers

https://www.geneva304.org/Downloads/ch%209%20key6.pd

this is what i found add an "f" at the end and search

10 How does no-till farming help the environment?
A It decreases soil erosion.
C It increases fertilizer use.
B It increases soil removal.
D It decreases crop yield.

Answers

Answer: Answer is A it will decrease soil erosion

Explanation:it just will trust me

Answer:

A.

Explanation:

the soil will not loosen when u till it

65 g of NaOH is dissolved to make 500 mL of solution. Find moles of NaPH and Molarity of solution.

Answers

Answer:

3.25 M

Explanation:

Number of moles = mass/ molar mass

mass of  NaOH = 65 g

Molar mass of NaOH = 40 g/mol

Number of moles of NaOH = 65g/40 g/mol = 1.625 moles

Let us recall that;

n = CV

n = number of moles of solute

C = concentration of solution

V = volume of solution

C = n/V

n = 1.625 moles

V = 500/1000 L = 0.5 L

C = 1.625 moles/0.5

C = 3.25 M

Which best describes the relationship between the terms frequency, wavelength, and hertz?

Answers

Answer:

The correct answer is - Frequency is the number of wavelengths, which is measured in hertz.

Explanation:

Frequency is the number of waves that go through a fixed point at a particular time. Hertz is the SI unit for frequency which means that one hertz is equal to a unit number of waver passes in a unit time to a fixed point.

As the frequency of a wave increases which means the number of waves increases in the unit time, the shorter the wavelength will be.

a higher frequency wave has more energy than a lower frequency wave with the same amplitude.

describe what happens when atoms release light?​

Answers

Answer:

hi

Explanation:

Light is the result of electrons moving between defined energy levels in an atom, called shells.

What number represents a mole?
5
1
4
14
8
6
19

Answers

6 is Avogadro’s number for one mole

what is geography in science​

Answers

The study of earth. Geo means earth

Can someone help me ❤️❤️❤️

Answers

Answer:

i think the answer would be C

Explanation:

no matter what you do to the jar the mass will stay the same. unless you add more nails

How many milliliters of 4.00 M NaOH are required to exactly neutralize 50.0 milliliters of a 2.00 M solution of HNO3 ?

Answers

Answer: The volume of [tex]NaOH[/tex] required is 25.0 ml

Explanation:

According to the neutralization law,

[tex]n_1M_1V_1=n_2M_2V_2[/tex]

where,

[tex]n_1[/tex] = basicity [tex]HNO_3[/tex] = 1

[tex]M_1[/tex] = molarity of [tex]HNO_3[/tex] solution = 2.00 M

[tex]V_1[/tex] = volume of  [tex]HNO_3[/tex] solution = 50.0 ml

[tex]n_2[/tex] = acidity of [tex]NaOH[/tex] = 1

[tex]M_1[/tex] = molarity of [tex]NaOH[/tex] solution = 4.00 M

[tex]V_1[/tex] = volume of  [tex]NaOH[/tex] solution =  ?

Putting in the values we get:

[tex]1\times 2.00\times 50.0=1\times 4.00\times V_2[/tex]

[tex]V_2=25.0ml[/tex]

Therefore, volume of [tex]NaOH[/tex] required is 25.0 ml

The volume of 4.00 M NaOH is required to exactly neutralize 50.0 ml of a solution of a 2.00 M solution of [tex]HNO_3[/tex] is 25.0 ml.

What is [tex]HNO_3[/tex]?

[tex]HNO_3[/tex] is nitric acid also known as the spirit of niter. It is colorless in its original form but appears yellow-colored.

By the neutralization law

[tex]n_1M_1V_1 = n_2M_2V_2[/tex]

n1 = 1

M1 = 2.00

M2 = 4.00

V1 = 50.0 ml

n2 = NaOH = 1

Putting the value in the formula

[tex]1 \times 2.00 \times 5.00 ml = 1 \times 4.00 \times V_2\\\\V_2 = 25.0\; ml[/tex]

Thus, the volume of NaOH required is 25.0 ml.

Learn more about nitric acid

https://brainly.com/question/26015251

Materials that allow electrons to move easily from atom to atom are called _____________.

Answers

Answer:

Explanation:

conductors

Conductors
Your welcome

Explain what helps convert non-rich oxygen blood cells back to oxygen rich cells?

Answers

Answer:

As blood travels through the body, oxygen is used up, and the blood becomes oxygen poor. Oxygen-poor blood returns from the body to the heart through the superior vena cava (SVC) and inferior vena cava (IVC), the two main veins that bring blood back to the heart.

Explanation:

Other Questions
This video allows us to see the circuit inside a flashlight. After watching the video, write notes in the space provided so that you can build the circuit in question 2.https://app.edmentum.com/content-delivery//resource/b79af08f-5dcb-48ad-a6f5-f2c6d1e8f518 Which phase comes NEXT? PLZZZ HELP!!!Select the correct answer.A testing team has a new software application to test. While writing the test plan, the team enters some functions that are out of scope for the current phase of testing. In which section of the test plan will you find these functions?A. IntroductionB. Features not to TestC. DeliverablesD. Dependencies Which of the following is an example of an activity that primarily uses the oxidative system? 2-mile run Baseball 400-meter sprint 100-meter sprint Do physical factors affect food supply more than human factors? because there was no written record of the village history, the stories of the griots became the history and the only record of past events. Griots often kept records ofGroup of answer choicesbirths and deathsmarriagesenvironmental events like droughtsall of the above A chemist weighed out 7.22 g of silver. Calculate the number of moles of silver she weighed out.Be sure your answer has the correct number of significant digits. Two similar solids have a scale factor of 3:4. What is the ratio of their areas?27:649:166:83:4 The distance between the two nearest points on a wave where the particles are in phase is 2 m. What is the wavelength of the wave?A. 1/2 mB. 1 mC. 2 mD. 2 secondsE. none of these A rectangular prism has a length of 2 feet a height of 18 feet and a width of 20 feet What is its volume, in cubic feet 4. Which of the following words communicate a similar meaning and feeling as the word cracksin the first stanza?a. opensb. Splitsc. Pokesd. Explodes Which types of charitable giving have you heard of? Check all that apply.volunteering at a soup kitchendonating clothes to a charitydonating canned food to a charityvolunteering at a hospitaldonating toys to a charityvolunteering at an animal shelter Several sheets of white drawing paper Drawing pencils Eraser Minimum of five objectsInstructions:After learning a little bit about still life drawing, the best way to further your understanding is to jump right in and try it out! So, thats what we are going to do! Find at least five objects around your house, or outside in nature, and arrange them somewhere that they will not be moved or messed with for at least 24 hours. Some ideas are: Dishes and food items Leaves, branches, rocks, or other nature items Toys and stuffed animals Sculptures or small trinkets Makeup or bathroom items * Remember to ask permission first if you are wanting to use something that belongs to someone else Once the objects are arranged to your liking, decide where you will sit. Make sure you are comfortable as still life drawing can sometimes take quite a while. If possible, put a small piece of tape on the floor to mark your exact location. Next, take a photograph of the objects to submit your final drawing. Make sure to take the photograph from the exact location that you will be drawing from. Start drawing! Keep in mind some of the tips mentioned in the unit: Experiment with and use shading to capture how the light is hitting your objects. Play around with different line strokes to create the different textures on each one of the objects. Try to recreate an identical image to what you see in terms of arrangement. Work on your still life for one solid hour. Then, get up and take a break for at least two hours, if not longer. When you return to your still life, make sure that you are sitting in the exact same location before you begin drawing again. Most likely, the lighting will be slightly different. How can you accommodate this in your drawing without having to start over? Continue working on your still life until you feel that you have perfectly captured the objects on the page as they are in real life.RECOMMENDED FOR ANYONE WHO LIKES TO DRAW What type of legislation must begin in the House of Representatives A transportation billsB appropriation bilisC education amendmentsD constitutional amendments Can someone help me please? 1. Solve for x. 52can someone help me please Hep yep help helphelp NEED HELP ASAPI know its not B or D 20 is what percentof 57? help!!!! please i give brainly-est :>