Answer:
B
Explanation:
why is bc i passesd thia in school so i think this is it
When water particles in their gaseous state (X) lose enough energy, they
When water particles in their liquid state (Y) gain enough energy, they
Matter are anything that is made up of atoms. The quantity of matter can be observed only on the basis of mass and volume calculation. Therefore, loosing and gaining energy by different phase of water, phases changes.
What is matter?Matter is a substance that has some mass and can occupy some volume. The matter is mainly used in science. Matter can be solid, liquid or gas.
Matter is anything that is made up of atoms. Anything around us that can be physically seen and touched are matter. Ice, water and water vapors are example of matter.
When water particles in their gaseous state (X) lose enough energy, then the gaseous state of water converts to liquid state as the kinetic energy of particles decreases. When water particles in their liquid state (Y) gain enough energy, then water converts to vapor state.
Therefore, loosing and gaining energy by different phase of water, phases changes.
To learn more about matter, here:
https://brainly.com/question/4562319
#SPJ5
Explain in a paragraph how do you know or can find the number of each subatomic particle using the information on the periodic table. include why the atomic mass of your element on the periodic table is not a whole number or why it is. (PLEASE ANSWER FOR BRAINLEST ANSWER)
Answer:
A typical atom consists of three subatomic particles: protons, neutrons, and electrons (as seen in the helium atom below). Other particles exist as well, such as alpha and beta particles (which are discussed below). The Bohr model shows the three basic subatomic particles in a simple manner. Most of an atom's mass is in the nucleus—a small, dense area at the center of every atom, composed of nucleons. Nucleons include protons and neutrons. All the positive charge of an atom is contained in the nucleus, and originates from the protons. Neutrons are neutrally-charged. Electrons, which are negatively-charged, are located outside of the nucleus.
Explanation:
The rolls in the table are called periods . which characteristic of the elements increases as you move across a period from left to right ?
Answer:
A. atomic number
Explanation:
An atomic number of the elements increases as you move across a period from left to right. Hence, option A is correct.
What is an atomic number?An atomic number is the number of a chemical element in the periodic system, whereby the elements are arranged in order of increasing the number of protons in the nucleus.
In a period atomic number increases as we move from left to right but the outermost shell remains the same. Hence it's only the number of protons increasing in the nucleus as we from left to right, the effect of the nucleus increases on the outermost shell hence atomic size decreases in a period.
Hence, The atomic number of the elements increases as you move across a period from left to right.
Learn more about the atomic number here:
https://brainly.com/question/8834373
#SPJ2
Predict how the milk digestion is affected in individuals that lack functional copies of the gene encoding lactase. Justify your response.
Answer:
Such individuals will be unable to digest milk.
Explanation:
Milk is a substance that contains a disaccharide sugar called LACTOSE. Lactose is a disaccharide sugar composed of glucose and galactose monomers. In order to digest the lactose sugar present in milk, an enzyme called LACTASE is needed.
Since lactase, like every other enzyme, is a protein, it is coded for by a functional gene. However, in an individual that lack functional copies of the gene encoding this lactase enzyme (protein), such individual will be unable to synthesize lactase, hence, be unable to breakdown (digest) lactose sugar in milk.
No lactase gene -> No lactase protein -> No enzyme -> No milk digestion
Which refrigerant is known to destroy ozone?
ammonia
Freon®
tetrafluoroethane
ice
Answer:
tetrafluoroethane
Explanation:
Its an HCFC, which are the refrigerants that destroy the ozone layer.
Answer:
Freon.
Explanation:
Brainliest plz???
What is the name of the unit in the measurement 0.8 L
Answer:
hiiiiiiiiiiiiiiiiiiiiiiiiiiii
Answer:
The name of this unit in the measurement is called: Liter
How do you find distance please help very fast.
The unknown ionic compound gave a green flame test, precipitate with ammonium carbonate, and a colorless/light yellow halide test. What is the unknown compound?
Answer:
BaI2
Explanation:
Barium gives a green flame test. When the halide test is conducted, a yellow precipitate indicates the presence of the iodide ion.
Also, BaI2 reacts with ammonium carbonate as shown below:
BaI2(aq) + (NH4)2CO3(aq) → BaCO3(s) + 2(NH4)I(aq)
The BaCO3(s) separates from the reaction system as a precipitate.
What is the answer A,B,C,D?
Answer:
Explanation:
I think that it is frequency
Answer:
B
Explanation:
Magnesium can interfere with the measurement of the calcium concentration in water samples using colorimetric tests. Write a balanced chemical equation for the reaction of dissolved magnesium chloride with sodium hydroxide to form magnesium hydroxide as a precipitate and sodium chloride.
(Reactants -> Products)
Answer:
[tex]MgCl_2+2NaOH\rightarrow 2NaCl+Mg(OH)_2[/tex]
Explanation:
Hello.
In this case, since aqueous magnesium chloride reacts with aqueous sodium hydroxide, a precipitate product, magnesium hydroxide is formed as well as aqueous sodium chloride as shown below:
[tex]MgCl_2+NaOH\rightarrow NaCl+Mg(OH)_2[/tex]
However, since there are two chlorine atoms at the reactants we need a 2 before NaCl on the products in order to balance it. Moreover, there one OH at the reactants and two OH at the products, that is why we also add a 2 before NaCl as shown below:
[tex]MgCl_2+2NaOH\rightarrow 2NaCl+Mg(OH)_2[/tex]
Best regards!
in a car engine a 250 mL cylinder and piston system is filled with a mixture of 0.42g and 0.24 g of octane gas and oxygen gas, respectively. Both gases are at room temperature of 33 c. If the total gas mixture is compressed to a pressure of 3.7 atm before combustion, calculate the total volume of gas mixture at this point in time.
Answer:
[tex]V_2=76.0mL[/tex]
Explanation:
Hello.
In this case, given the initial masses of both octane (C8H18, molar mass = 114 g/mol)) and oxygen (O2, molar mass = 32 g/mol), we can compute their moles and subsequently the total pressure via the ideal gas equation at 33 °C into the 250-mL:
[tex]n_{octane}=0.42g*\frac{1mol}{114g} =3.7x10^{-3}mol\\\\n_{oxygen}=0.24g*\frac{1mol}{32g} =7.5x10^{-3}mol\\\\n_T=7.5x10^{-3}mol+3.7x10^{-3}mol=0.0112mol\\\\P_1=\frac{n_TRT}{V_1}=\frac{0.0112mol*0.082\frac{atm*L}{mol*K}*(33+273.15)K}{0.25L}=1.1atm[/tex]
After that, via the Boyle's law, we compute the final pressure in the cylinder and piston system:
[tex]P_1V_1=P_2V_2\\\\V_2=\frac{P_1V_1}{P_2} =\frac{250mL*1.1atm}{3.7atm}\\ \\V_2=76.0mL[/tex]
Best regards!
You are assigned the task of separating a desired granular material, with a density of 3.26 g/cm3, from an undesired granular material that has a density of 2.04 g/cm3. You want to do this by shaking the mixture in a liquid. A solid will float on any liquid that is more dense. Using an Internet-based source, find the densities of the following substances: carbon tetrachl oride, hexane, benzene, and diiodomethane. Which of these liquids will serve your purpose, assuming no chemical interaction between the liquid and the solids?
Answer:
diiodomethane
Explanation:
The densities of each of the liquids mentioned in the question are stated below;
CCl4- 1.59 g/cm^3
Hexane- 0.672 g/cm^3
Benzene- 0.8765 g/cm^3
Diiodomethane- 3.3 g/cm^3
Clearly, the density of diiodomethane methane is almost the same as that of the desired granular material, hence the undesired granular material having a density of 2.04 g/cm3 will float in diiodomethane thus separating the two granular materials.
I need ASAP! When particles are enclosed in a vesicle and released OUT of a cell, the process is called:
A
Osmosis
B
Diffusion
C
Endocytosis
D
Exocytosis
Answer:D Diffusion
Explanation:
Because the the cell Is letting it go diffuse it to remove it.
What would you expect to happen if Earth did not tilt on its axis?
Answer:
If the earth did not tilt on its axis we would not have 4 seasons, and it would be hooall the time since when we rotate around the sun the earth with become Hot all the way around.
Explanation:
Why is ice less dense than water?
Answer:
Ice has a very different structure than liquid water
Explanation:
the lattice arrangement allows water molecules to be more spread out than in a liquid, and, thus, ice is less dense than water.
Answer:
Ice has a different structure than water, they align themselves in a regular lattice rather than completely random in a liquid. The orientation of hydrogen bonds cause molecules to push farther apart, which lowers the density.
What are the alkali metals?
A. Elements with eight valence electrons
B. Group 18 on the periodic table
C. The second group on the periodic table
D. The first group on the periodic table
Answer:
The answer would be D they are the first group on the periodic table.
Explanation:
Which scientist was the first to practice the scientific method we use today
En Hedu'Anna
Aristotle
Archimedes
Answer:
Aristotle
Explanation:
Answer: Aristotle
Explanation:
because i took the quiz
This is timed i need this fast
Answer:
1. or A
Explanation:
3
Identify the ions present in K2HPO4.
1) K+ and H+ and PO43-
6
2) K 2+ H+, and PO43-
9
3) K+, H+, p3-, and O2-
4) K2H3+ and PO43-
5) K2HPO4 is not ionic.
Answer:
K⁺ and HPO₄²⁻ ions are present in K₂HPO₄
Explanation:
K₂HPO₄ consist of anion and cation such as HPO₄²⁻ and K⁺. We can see that the charge on HPO₄²⁻ is negative 2. Thus inroder to balance the charge and to neutral the compound two potassium ions are attached because the charge on one atom of potassium is K⁺.
Properties of K₂HPO₄ :
It is salt of phosphoric acid.
Its density is 2.44 g/cm³.
It is odourless compound.
It is white powder and soluble in water.
It is used in fertilizer because it provide phosphorus which is beneficial for the growth of plants.
It is also used as a additive in food.
It is inorganic compound and also used as buffering agent.
When a base metal is converted into gold - this phenomenon is best described as what?
Answer:
Alchemy
Explanation:
Alchemy is the believe that base metals such as a copper, lead etc can be transmuted into gold.
The alchemists were in search of a magical piece that would enable them to make gold from base metals. They called this magical stuff 'the Philosopher's Stone'.
Modern science has discovered that lead can be turned into gold,without applying the methods of alchemy. Nuclear transmutation in particle accelerators can indeed change one element into another.
Which of the following phrases describe the function of the digestive system? Select the two best answers.
I. Smooth, muscular tube connects the mouth to the stomach
II. Muscular action in the esophagus pushes food to the stomach
III. Structures called microvilli increase the surface area of the intestines
IV. Nutrients are made available to the body’s cells
Answer:
Options I & II
I. Smooth, muscular tube connects the mouth to the stomach
II. Muscular action in the esophagus pushes food to the stomach
Explanation:
In digestive systems, we have what we call esophagus. The process is that;
The esophagus we have is a tubular like organ which connects the mouth to the stomach. Now, when we chew food and it's soft, the food will pass through the esophagus after we have swallowed it.
The smooth muscles of the esophagus will now undergo peristalsis which is a series of wave like movements that will push the food toward the stomach.
Thus, we have seen that the esophagus is a smooth tube and that muscle action on it enables the food to be pushed down the stomach.
Thus, options I & II are correct.
The molecular formula of butane is C4H10. It is obtained from petroleum and is used commonly in LPG (Liquefied Petroleum Gas) cylinders (a common source of cooking gas). It has two arrangements of carbon atoms: a straight chain and a branched chain. Using this information, draw the structure of the tertiary butyl radical that will form upon removal of a hydrogen atom. Draw the molecule on the canvas by choosing buttons from the Tools (for bonds).
Answer:
See attached picture.
Explanation:
Hello.
In this case, since butane has two common occurring structures, n-butane and isobutane, there is a way in which the tert-butyl radical can be formed upon the removal of a hydrogen from the isobutane form of butane as shown on the attached picture, wherein you can see that the radical is named by "tert" since the central carbon is bonded to three carbon atoms, that is why we classify it as tertiary. Moreover, it is a radical due to the presence of the bolded dot next to the tertiary carbon suggesting that it is very likely to bond with an other atom.
Best regards.
why are phase changes horizontal on a heating curve
Answer:
A heating curve graphically represents the phase transitions that a substance undergoes as heat is added to it. The plateaus on the curve mark the phase changes.The second change of phase is boiling, as the temperature stays the same during the transition to gas.
Explanation:
QUESTION 6
1. What is the maximum amount (in grams) of sulfur dioxide that can be produced by the reaction of 1380 g
of dihydrogen sulfide with 6890 g of oxygen according to the balanced equation below?
2 H2S(g) + 3 O2(g) + 2 H2O(g) + 2 SO2(g)
Enter the numeric value in the box without units.
Answer:
Explanation:
2 H₂S(g) + 3O₂(g) = 2 H₂O(g) + 2SO₂(g)
2 moles 3 moles 2 moles
1380 g of H₂S = 1380 / 34 = 40.588 moles of H₂S
6890 g of oxygen = 6890 / 32 = 215.31 moles of oxygen
Here H₂S is limiting reagent .
2 mole of H₂S reacts to give 2 moles of sulfur dioxide .
40.588 moles of H₂S will react to give 40.588 moles of sulfur dioxide.
sulfur dioxide formed = 40.588 moles
= 40.588 x 64 = 2597.63 g of sulfur dioxide.
The maximum amount of sulfur dioxide is 2597.63 g of sulfur dioxide.
Calculation of maximum amount:Since
2 H₂S(g) + 3O₂(g) = 2 H₂O(g) + 2SO₂(g)
So,
2 moles 3 moles 2 moles
Now
= 1380 g of H₂S
= 1380 / 34
= 40.588 moles of H₂S
Now
= 6890 g of oxygen
= 6890 / 32
= 215.31 moles of oxygen
Here H₂S represents limiting reagent .
2 moles of H₂S reacts to provide 2 moles of sulfur dioxide .
Now
40.588 moles of H₂S will react to provide 40.588 moles of sulfur dioxide.
Also,
sulfur dioxide formed = 40.588 moles
So,
= 40.588 x 64
= 2597.63 g of sulfur dioxide.
Learn more about reaction here: https://brainly.com/question/21091465
Calculate the hydronium ion, H3O+ , and hydroxide ion, OH− , concentrations for a 0.0440 M HCl solution. [H3O+]= M [OH−]=
Answer:
[H3O+] = 0.0440M
[OH-] = 2.27x10⁻¹³M
Explanation:
Based on the equilibrium of water:
2H2O ⇄ H3O+ + OH-
K = 1x10⁻¹⁴ = [H3O+] [OH-] (1)
We can determine [OH-] with [H3O+] or vice versa
As HCl is a strong acid, [HCl] = [H3O+]
That means:
[H3O+] = 0.0440M
And [OH-] is:
1x10⁻¹⁴ / [H3O+] = [OH-]
2.27x10⁻¹³M = [OH-]
Taking into account the definition of pH and pOH, the hydronium ion, H₃O⁺, and hydroxide ion, OH−, are 0.044 M and 2.29×10⁻¹³ M respectively.
First of all, pH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.
The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:
pH= - log [H⁺]= - log [H₃O⁺]
Similarly, pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:
pOH= - log [OH⁻]
The following relationship can be established between pH and pOH:
pOH + pH= 14
In this case, you have a 0.044 M HCl. HCl is a strong acid.
It is called strong acid, that acid that dissociates completely in solution at constant temperature and pressure. Under these conditions, the concentration of a strong acid is equal to the concentration of hydrogen ions (Hydronium or H₃O⁺). Then, in this case:
[H⁺]= [H₃O⁺]= [HCl]= 0.044 M
Replacing in the definition of pH:
pH= -log (0.044 M)
Solving:
pH= 1.36
Considering the relationship established between pH and pOH:
pOH + 1.36= 14
pOH= 14 -1.36
pOH= 12.64
Finally, replacing in the definition of pOH:
12.64= -log [OH-]
[OH-]= 10⁻¹² ⁶⁴
[OH-]= 2.29×10⁻¹³ M
In summary, the hydronium ion, H₃O⁺, and hydroxide ion, OH−, are 0.044 M and 2.29×10⁻¹³ M respectively.
Learn more:
brainly.com/question/12200689 brainly.com/question/16032912?referrer=searchResults brainly.com/question/13557815?referrer=searchResultsIdentify each process numbered 1-6
Answer:
1 = Melting
2 = Freezing
3 = Sublimation
4 = Deposition
5 = Condensation
6 = Boiling
Explanation:
fabric it is useful or harmful
Answer:
useful of course because u wont be able to pick up any thing
Fabric can be both useful and harmful.
Fabric can be useful for...
Making clothing.Made into rags.And many more ways.Fabric can be harmful in these ways...
Small pieces can be choked on by toddlers.It can get wrapped around your neck.And many wore ways.Hope i helped!
May I have brainliest?
[tex]\huge\boxed{Thanks,\;Plip.}[/tex]
Increasing the concentration of substances in a chemical reaction will _____.
Answer:
it will increase the rate of reaction
Answer:
Option (a) is the correct answer.
Explanation:
When we increase the concentration of substances in a chemical reaction then it means there are more number of molecules present in a reaction.
Hence, when these molecules will interact with each other then there will occur more number of collisions. As a result, kinetic energy of molecules will increase and this leads to increase in rate of chemical reaction.
Thus, we can conclude that increasing the concentration of substances in a chemical reaction will increase reaction rate.
Hope this helps!
Have a great day! :))))
11. Drawing the Graph
Mass vs Volume
SER
20
15
10
2
4
Nu
12. Find the slope of the line (density of the substance);
Questions and Problems
Q1A metal object has a mass of 8 37 2. When it was placed in a graduated cylinder
containing 20.0 ml. of water, the water level rose to 23.1 mul
a) What is the density of the metal (Show calculation?
a) What is the identity of the metal (see Reference Table S)
Q2What is the mass of a solution that has a density of 0 775 gm. and a volume of
500 ml?
Q3What is the volume of a solution that has a density of 12 g ml, and mass of 185?
No
William Astbury discovered that the X‑ray diffraction pattern of wool shows a repeating structural unit of approximately 5.2 Å along the length of the wool fiber. Choose the statement that explains the observed 5.2 Å length of the repeating structural unit in the wool polypeptide, α‑keratin.
a. The wool polypeptide α‑keratin exists primarily as a B‑form double helix, where the length of each complete turn of the helix is 5.2 Å.
b. The wool polypeptide α‑keratin consists primarily of α‑helices arranged as coiled coils, where the length of each complete turn of the helix is 5.2 Å.
c. The wool polypeptide α‑keratin has a fully extended backbone and does not contain any regular secondary structure elements.
d. The wool polypeptide α‑keratin consists of left‑handed helices arranged in a triple‑helix coiled coil. In left‑handed helices, the length each complete turn of the helix is 5.2 Å.
Answer:
A
Explanation:
That answer is the only one that makes sense, because according to the law of pulindu, najah is polypeptide akeratin primarly b orm as