Christina can conclude that Substance A will float.
Part A: Substance A will float.
Part B: To determine which substance will float, we need to compare their densities with the density of water. Density is defined as mass per unit volume. We can calculate the density of each substance by dividing its mass by its volume:
Density of Substance A = 4 g / 6 mL = 0.67 g/mL
Density of Substance B = 8 g / 6 mL = 1.33 g/mL
Density of Substance C = 10 g / 6 mL = 1.67 g/mL
The density of water is approximately 1 g/mL. A substance will float if its density is less than the density of water. In this case, Substance A has the lowest density (0.67 g/mL), which is less than the density of water, so it will float. Substance B and Substance C have densities greater than the density of water, so they will sink. Therefore, Christina can conclude that Substance A will float.
To know more about density of water:
https://brainly.com/question/31237897
#SPJ11
Calculate the [OH-] and pH of the following solutions:
a. 0. 105 M NaF. The Ka of HF is 6. 4 x 10-4
In this solution is the [HF]=[NaF] based on stoichiometry?
[OH⁻] = 1.1 x 10⁻¹⁰ M, pH = 9.96; No, [HF] is not equal to [NaF] based on stoichiometry as NaF dissociates completely to form Na⁺ and F⁻ ions, whereas HF dissociates partially.
The dissociation of NaF in water can be represented as follows:
NaF (s) -> Na⁺ (aq) + F⁻ (aq)Since NaF is a salt of a strong base (NaOH) and a weak acid (HF), the F⁻ ion will hydrolyze in water to produce OH⁻ ions.
The hydrolysis reaction is as follows:
F⁻ (aq) + H₂O (l) -> HF (aq) + OH⁻ (aq)Firstly, we can use the equilibrium expression for the reaction of HF with water to calculate the [H⁺] ion concentration:
HF (aq) + H₂O (l) ↔ H₃O+ (aq) + F⁻ (aq)Ka = [H₃O⁺][F⁻]/[HF] = 6.4 x 10⁻⁴Since the initial concentration of HF is negligible, we can assume that the concentration of F- ion at equilibrium is equal to the initial concentration of NaF.
Therefore, [H₃O⁺] = √(Ka*[HF]) = 1.02 x 10⁻⁹ MUsing Kw = [H⁺][OH⁻], we can calculate the [OH⁻] ion concentration:
Kw = [H⁺][OH⁻] = 1.0 x 10⁻¹⁴[OH⁻] = Kw/[H⁺] = 9.8 x 10⁻⁶ MpH = -log[H⁺] = 9.96Since NaF dissociates completely in water, [F⁻] = 0.105 M. Therefore, [HF] = Ka*[NaF]/[F⁻] = 6.4 x 10⁻⁴ * 0.105/1 = 6.72 x 10⁻⁵ M.
Hence, [HF] is not equal to [NaF] based on stoichiometry.
To learn more about stoichiometry, here
https://brainly.com/question/30215297
#SPJ4
Proline is an amino acid that can be abbreviated HPro. If 33. 55 ml of 0. 150M NaOH neutralizes 0. 579g of HPro. What is the molar mass of proline
If 33. 55 ml of 0. 150M NaOH neutralizes 0. 579g of HPro then the molar mass of proline is 115.08 g/mol.
To find the molar mass of proline, we need to first calculate the number of moles of HPro that reacted with the NaOH.
We can use the equation:
HPro + NaOH → NaPro + H2O
From the balanced equation, we can see that 1 mole of HPro reacts with 1 mole of NaOH.
Using the concentration and volume of NaOH, we can calculate the number of moles of NaOH used:
moles of NaOH = concentration x volume
moles of NaOH = 0.150 mol/L x 0.03355 L
moles of NaOH = 0.005033 mol
Since 1 mole of HPro reacts with 1 mole of NaOH, the number of moles of HPro used is also 0.005033 mol.
Now we can calculate the molar mass of HPro:
molar mass = mass / moles
molar mass = 0.579 g / 0.005033 mol
molar mass = 115.08 g/mol
Therefore, the molar mass of proline is 115.08 g/mol.
Know more about Amino Acid here:
https://brainly.com/question/28409615
#SPJ11
A potted plant is placed under a grow lamp, which provides 6,200. J of energy to the plant and the soil over the course of an hour. The specific heat capacity of the soil is about 0. 840 J/g°C and the temperature goes up by 8. 75°C of soil. How many grams of soil are there?
WILL GIVE BRAINLIEST!!!!!!!!!!!!!!!!
A potted plant is placed under a grow lamp, which provides 6,200. J of energy to the plant and the soil over the course of an hour. The specific heat capacity of the soil is about 0. 840 J/g°C and the temperature goes up by 8. 75°C of soil. 800 grams of soil are there
We can use the formula:
Q = m * c * ΔT
where Q is the amount of energy transferred, m is the mass of the material, c is the specific heat capacity of the material, and ΔT is the change in temperature.
We know that Q = 6,200 J, c = 0.840 J/g°C, and ΔT = 8.75°C. We can rearrange the formula to solve for m:
m = Q / (c * ΔT)
Plugging in the values, we get:
m = 6,200 J / (0.840 J/g°C * 8.75°C)
m = 800 grams
Therefore, there are 800 grams of soil.
To know more about the specific heat capacity refer here :
https://brainly.com/question/28941910#
#SPJ11
How many moles of chlorine gas react when 320. 5 grams of aluminum chloride is formed?
To determine the number of moles of chlorine gas required for the formation of 320.5 grams of aluminum chloride, we need to use the balanced chemical equation for the reaction. The equation for the reaction between aluminum and chlorine gas to form aluminum chloride is:
2Al(s) + 3Cl2(g) → 2AlCl3(s)
From the equation, we can see that for every two moles of aluminum, three moles of chlorine gas are required to form two moles of aluminum chloride. Therefore, we can set up a proportion:
2 moles of AlCl3 : 3 moles of Cl2 = 320.5 g of AlCl3 : x
Where x is the number of moles of Cl2 required.
We can use the molar mass of aluminum chloride (133.34 g/mol) to convert the mass of AlCl3 to moles:
320.5 g AlCl3 ÷ 133.34 g/mol = 2.403 moles AlCl3
Substituting the values into the proportion, we get:
2 moles of AlCl3 : 3 moles of Cl2 = 2.403 moles of AlCl3 : x
Solving for x, we get:
x = 3.605 moles of Cl2
Therefore, 3.605 moles of chlorine gas are required to react with 320.5 grams of aluminum to form aluminum chloride.
To know more about moles of chlorine gas required refer here
https://brainly.com/question/29188808#
#SPJ11
If 456 kJ of heat is absorbed to change oxygen from a solid to a liquid, how many grams of oxygen were there?
AH fus=0. 44 kJ/mol
AHvap=6. 82 kJ/mol
33,163.52 grams of oxygen were involved in the phase change.
To find the number of grams of oxygen involved in this phase change, we will use the enthalpy of fusion (ΔHfus) since it's a change from solid to liquid. The formula we'll use is:
q = n × ΔHfus
Where q is the heat absorbed (456 kJ), n is the number of moles, and ΔHfus is the enthalpy of fusion (0.44 kJ/mol). First, we'll find the number of moles (n):
456 kJ = n × 0.44 kJ/mol
n = 456 kJ / 0.44 kJ/mol
n ≈ 1036.36 moles
Now that we have the number of moles, we can find the grams of oxygen using the molar mass of oxygen (O2), which is 32 g/mol:
mass = n × molar mass
mass ≈ 1036.36 moles × 32 g/mol
mass ≈ 33163.52 grams
Therefore, approximately 33,163.52 grams of oxygen were involved in the phase change.
To learn more about mass, refer below:
https://brainly.com/question/19694949
#SPJ11
12. What is the weight/volume percent concentration of 100. ML of a 30. 0% (w/v) solution of
vitamin C after diluting to 200. ML?
The weight/volume percent concentration of the diluted solution is 15%.
The initial solution is a 30.0% (w/v) solution, which means that 30.0 grams of vitamin C is dissolved in 100 mL of the solution. Therefore, the amount of vitamin C in the initial solution is:
30.0% (w/v) = 30.0 g / 100 mL = 0.3 g/mL
The initial solution is then diluted to a final volume of 200 mL. Since the amount of vitamin C in the solution remains constant, we can use the following equation to calculate the final concentration:
CiVi = CfVf
where Ci and Vi are the initial concentration and volume, and Cf and Vf are the final concentration and volume.
We can rearrange the equation to solve for the final concentration:
Cf = (CiVi) / Vf
Substituting the values, we get:
Cf = (0.3 g/mL x 100 mL) / 200 mL
Cf = 0.15 g/mL
Finally, we can convert the concentration to weight/volume percent by multiplying by 100:
weight/volume percent = Cf x 100%
weight/volume percent = 0.15 g/mL x 100%
weight/volume percent = 15%
To know more about vitamin C refer to-
https://brainly.com/question/15080220
#SPJ11
Recrystallization of organic compounds lab report (discussion)
In the discussion section of a recrystallization of organic compounds lab report, it is important to address the key aspects of the experiment, including the choice of solvent, the process of recrystallization, and the purity of the final product.
The choice of solvent plays a crucial role in the success of the recrystallization process. An ideal solvent should dissolve the organic compound when heated but allow the compound to recrystallize upon cooling. Additionally, impurities should either remain soluble in the cooled solvent or be insoluble in the hot solvent to ensure effective separation.
During the recrystallization process, the organic compound is dissolved in a hot solvent and allowed to cool slowly. As the solution cools, the solubility of the compound decreases, leading to the formation of crystals. The crystals are then collected by filtration, leaving the impurities behind in the solvent.
To assess the purity of the recrystallized product, techniques such as melting point determination or spectroscopic methods (e.g., infrared spectroscopy, NMR) can be employed. A narrow melting point range or consistent spectroscopic data with the reference compound indicate a high degree of purity.
In summary, recrystallization is a critical technique for purifying organic compounds, and the choice of solvent, proper execution of the recrystallization process, and purity analysis are all essential components of a successful lab report discussion.
Know more about Recrystallization here:
https://brainly.com/question/29215760
#SPJ11
3. If 720. 0 g of steam at 400. 0 °C absorbs 800. 0 kJ of heat energy, what will be its increase in
temperature? (Cp of steam = 1. 7 J/g °C)
The increase in temperature of the steam if it absorbs 800 kJ of heat energy is 653.6°C
How to calculate increase in temperature?The specific heat capacity is the amount of thermal energy required to raise the temperature of a system by one temperature unit. The increase in temperature of a metal can be calculated using the following expression;
Q = mc∆T
Where;
Q = quantity of heat absorbed or releasedm = massc = specific heat capacity∆T = change in temperature800,000 = 720 × 1.7 × ∆T
800000 = 1,224∆T
∆T = 653.6°C
Learn more about change in temperature at: https://brainly.com/question/11477213
#SPJ1
Two students made the Lewis dot diagrams of NH3. The diagrams are as shown.
Two visual diagrams of an N H three molecule are shown. Student As diagram on the left has nitrogen at the center and connects with each hydrogen atom by an arrow pointing away from nitrogen, one below, one on the right, and one on the left. There is a pair of dots above the nitrogen atom. Student Bs diagram on the right has nitrogen at the center connecting by a straight line to each hydrogen positioned below, to the left, and to the right of nitrogen.
Which student drew the correct Lewis dot diagram? (4 points)
Group of answer choices
Only Student A
Only Student B
Both Student A and Student B
Neither Student A nor Student B
Answer:
only student B
Explanation:
five electrons int eh valence shell of nitrogen atoms
13. Lab Analysis: You forgot to label your chemicals and do not know whether your unknown solution is strontium nitrate or magnesium nitrate. You use the solutions potassium carbonate and potassium sulfate in order to determine your mistake. unknown + potassium carbonate & unknown + potassium sulfate . What do you observe when the unknown solution is mixed with potassium sulfate? (Can you see the shape underneath?)
if the unknown solution is mixed with potassium carbonate, the reaction will proceed differently depending on whether the unknown solution is strontium nitrate or magnesium nitrate.
Mixing the unknown solution with potassium sulfate will not provide any useful information to identify whether the unknown solution is strontium nitrate or magnesium nitrate. This is because neither strontium nor magnesium sulfate has distinctive properties that allow them to be easily distinguished from one another.
However, When mixed with strontium nitrate, potassium carbonate will form a white precipitate of strontium carbonate, while no reaction will occur when mixed with magnesium nitrate. Therefore, the presence of a white precipitate after mixing with potassium carbonate indicates that the unknown solution is strontium nitrate.
In summary, to identify whether the unknown solution is strontium nitrate or magnesium nitrate, the solution should be mixed with potassium carbonate. If a white precipitate forms, the solution is strontium nitrate. If no reaction occurs, the solution is magnesium nitrate. Mixing the unknown solution with potassium sulfate will not provide any useful information.
For more such questions on magnesium, click on:
https://brainly.com/question/30333465
#SPJ11
How many grams are there in 7.250 x 1094 atoms of Magnesium, Mg?
Answer:
7.250 x 1094 atoms of Magnesium, Mg is equal to 0.008038 grams.
I hope this helps you
Unit 6 Critical Thinking Questions! (HELP) - 30 POINTS
1. Compare and contrast positive and negative feedback loops of the endocrine system. Provide a specific example of each, including which gland is responsible for the hormone related to that loop.
2. What is the difference between endocrine and exocrine glands in terms of both form and function? Why is one type not considered part of the endocrine system?
3. Describe the cascade of events that occurs when blood glucose levels decline, including which organ and cells respond, which hormones are released, and how the process helps maintain homeostasis. Your answer should cover all three ways glucose is re-introduced to the body. What is the ultimate use of the glucose created in this process?
4. Why can both type I and type II diabetes, untreated, result in impaired vision or blindness as someone ages? How does type II diabetes turn into type I diabetes as someone ages?
5. Imagine you have a patient who has come to you and is exhibiting symptoms such as fatigue and increased thirst and urination. What would you check for to determine whether the patient has Cushing’s, type I diabetes, or type II diabetes?
1. Positive feedback loops amplify or increase changes, while negative feedback loops counteract or reduce changes.
2. The main difference between endocrine and exocrine glands is that endocrine glands secrete hormones directly into the bloodstream, while exocrine glands secrete substances through ducts.
3. When blood glucose levels decline, the pancreas' alpha cells release glucagon, which signals the liver to break down glycogen into glucose, promotes gluconeogenesis, and releases glucose into the bloodstream.
4. Both type I and type II diabetes can result in impaired vision or blindness due to high blood sugar damaging blood vessels in the retina.
5. To determine if a patient has Cushing's, type I diabetes, or type II diabetes, check for cortisol levels (Cushing's), insulin levels, and blood sugar levels (diabetes).
1. An example of a positive feedback loop is oxytocin release during childbirth from the posterior pituitary gland. An example of a negative feedback loop is the regulation of thyroid hormones by the thyroid gland, where a decrease in hormone levels triggers the release of more hormones.
2. Endocrine glands are part of the endocrine system, while exocrine glands are not, due to their use of ducts for secretion.
3. The ultimate use of this glucose is to provide energy for the body.
4. Type II diabetes doesn't turn into type I diabetes as they are distinct conditions.
5. Additional tests may include glucose tolerance and autoimmune marker tests.
To know more about endocrine glands click on below link:
https://brainly.com/question/9194966#
#SPJ11
Help what’s the answer?
The number of moles in 1.16 × 10³g of Fe₂O₃ is 7.26 moles.
How to calculate number of moles?The number of moles in a substance can be calculated by dividing the mass of the substance by its molar mass as follows:
no of moles = mass ÷ molar mass
According to this question, 1.16 × 10³ grams of iron (II) oxide is given. The molar mass of this compound is 159.69 g/mol.
no of moles in Fe₂O₃ = 1160g ÷ 159.69g/mol = 7.26 moles.
Learn more about no. of moles at: https://brainly.com/question/26416088
#SPJ1
A 0. 3 gram piece of copper is heated and fasioned into a bracelet. The amount of energy transferred by heat to the copper is 66,300 Joules. If the specific heat of copper is 390J/gxC, what is the change of the copper's temperature? (4 sig figs)
The change in temperature of the copper is 42.8°C.
The change in temperature of the copper can be calculated using the formula:
q = m * c * ΔT
where q is the amount of heat transferred, m is the mass of the copper, c is the specific heat capacity of copper, and ΔT is the change in temperature.
Rearranging the formula to solve for ΔT, we get:
ΔT = q / (m * c)
Substituting the given values, we have:
ΔT = 66,300 J / (0.3 g * 390 J/g°C)
ΔT = 42.8°C
Therefore, the change in temperature of the copper is 42.8°C.
To know more about heat transferred, here
brainly.com/question/13433948
#SPJ1
--The complete Question is, What is the change in temperature of a 0.3-gram piece of copper that is fashioned into a bracelet if 66,300 Joules of heat energy is transferred to it? Given that the specific heat of copper is 390 J/gxC. --
A 2. 50g sample of zinc is heated, then placed in a calorimeter containing 60. 0g of water. The temperature of water increases from 20. 00 degrees C. The specific heat of Zinc is 0. 390J/g Degree C. What was the initial temperature of the zinc metal sample?
We can use the equation:
q(zinc) = -q(water)
where q(zinc) is the heat lost by the zinc and q(water) is the heat gained by the water.
q(zinc) = m(zinc) × C(zinc) × ΔT
where m(zinc) is the mass of zinc, C(zinc) is the specific heat of zinc, and ΔT is the temperature change of the zinc.
The heat gained by the water :
q(water) = m(water) × C(water) × ΔT
where m(water) is the mass of water, C(water) is the specific heat of water, and ΔT is the temperature change of the water.
Since the calorimeter is assumed to be perfectly insulated, we can assume that the heat lost by the zinc is equal to the heat gained by the water:
m(zinc) × C(zinc) × ΔT = m(water) × C(water) × ΔT
m(zinc) × C(zinc) = m(water) × C(water)
2.50 g × 0.390 J/g°C = 60.0 g × 4.184 J/g°C
ΔT = q(water) / (m(water) × C(water))
= (2.50 g × 0.390 J/g°C) / (60.0 g × 4.184 J/g°C)
= 0.00916°C
Since we know the initial temperature of the water is 20.00°C, we can use the formula for temperature change:
ΔT = final temperature - initial temperature
Rearranging this formula, we get:
initial temperature = final temperature - ΔT
Substituting the given values, we get:
initial temperature = 20.00°C - 0.00916°C
= 19.99084°C
Therefore, the initial temperature of the zinc metal sample was approximately 19.99°C.
To know more about temperature change refer here:
https://brainly.com/question/28884653
#SPJ11
1: calculate the ph of a 0.25m solution of h3o+
2: calculate the ph of a 6.3x10-8m solution of h3o+
3: look at your answer for 4 and 5 which one is a base?
4: look at 4 and 5 which one is a strong acid
please show your work
The pH of a 6.3 x [tex]10^{-8[/tex]M solution of H₃O+ is approximately 7.20.
A 0.25 M solution of H₃O+ is not a strong acid, since it is not a single acid that completely dissociates in water.
A 6.3 x [tex]10^{-8[/tex] M solution of H₃O+ is not a strong acid, since it is a very weak acid with a very low concentration of H₃O+ ions.
The pH of a 0.25 M solution of H₃O+ can be calculated using the formula:
pH = -log[H₃O+]
where [H₃O+] is the concentration of H₃O+ ions in moles per liter (M).
In this case, [H3O+] = 0.25 M,
pH = -log(0.25) = 0.602
Therefore, the pH of a 0.25 M solution of H₃O+ is approximately 0.602.
The pH of a 6.3 x [tex]10^{-8[/tex] M solution of H₃O+ can be calculated using the same formula:
pH = -log[H₃O+]
In this case, [H₃O+] = 6.3 x [tex]10^{-8[/tex]M, so we have:
pH = -log(6.3 x [tex]10^{-8[/tex]) = 7.20
Therefore, the pH of a 6.3 x [tex]10^{-8[/tex] M solution of H₃O+ is approximately 7.20.
There is no information given for question 3.
A strong acid is an acid that completely dissociates in water to produce H₃O+ ions. The most common example of a strong acid is hydrochloric acid (HCl).
Looking at the given solutions:
A 0.25 M solution of H₃O+ is not a strong acid, since it is not a single acid that completely dissociates in water.
A 6.3 x [tex]10^{-8[/tex] M solution of H₃O+ is not a strong acid, since it is a very weak acid with a very low concentration of H₃O+ ions.
Therefore, neither of the given solutions is a strong acid.
To know more about strong acid
https://brainly.com/question/31143763
#SPJ4
A solution has [H3O+]= 2. 0×10−6 M. Use the ion product constant of water
Kw=[H3O+][OH−]. To find the [OH−] of the solution
The concentration of [OH⁻] in the solution is 5.0×10⁻⁹ M.
To find the [OH⁻] of the solution with [H3O⁺] = 2.0×10⁻⁶ M, you can use the ion product constant of water, Kw = [H₃O⁺][OH⁻].
Step 1: Write down the known values and the ion product constant of water (Kw = 1.0×10⁻¹⁴ at 25°C).
[H₃O⁺] = 2.0×10⁻⁶ M
Kw = 1.0×10⁻¹⁴
Step 2: Use the formula Kw = [H₃O⁺][OH⁻] to solve for [OH⁻].
1.0×10⁻¹⁴ = (2.0×10⁻⁶ M) × [OH⁻]
Step 3: Divide both sides by [H₃O⁺] to isolate [OH⁻].
[OH⁻] = (1.0×10⁻¹⁴) / (2.0×10⁻⁶ M)
Step 4: Calculate the concentration of [OH⁻].
[OH⁻] = 5.0×10⁻⁹ M
So, the concentration of [OH⁻] in the solution is 5.0×10⁻⁹ M.
To know more about concentration of [OH⁻]:
https://brainly.com/question/31328147
#SPJ11
If two wavelengths pass a given point each second, and the distance between wave crests is 3 m, what is the wave speed?
The wave speed is 6 m/s.
The frequency of the wave is given as 2 Hz, which means that two wavelengths pass a given point each second. The distance between wave crests (wavelength) is given as 3 m.
The distance between wave crests is the wavelength (λ), which is 3 m in this case. The frequency (f) is given as two wavelengths passing a given point each second, so f = 2 Hz.
Using the formula:
Wave speed = frequency × wavelengthWe can plug in the values to get:
Wave speed = 2 Hz × 3 m = 6 m/sTherefore, the wave speed is 6 m/s.
To learn more about Wave speed, here
https://brainly.com/question/31682106
#SPJ4
A container of helium is at 40°C with a volume of 2. 55 L. What must the temperature be (in °C) raised to for the volume to be 4. 50 L?
A container of helium is at 40°C with a volume of 2. 55 L. The temperature must be 280.81°C raised to for the volume to be 4. 50 L.
Using the combined gas law, we can find the temperature change needed to achieve a volume of 4.50 L:
(P1V1/T1) = (P2V2/T2)
At the start, P1 = P2 since the pressure is constant. So we can simplify the equation:
(V1/T1) = (V2/T2)
Plugging in the given values, we get:
(2.55 L)/(313.15 K) = (4.50 L)/T2
Solving for T2, we get:
T2 = (4.50 L x 313.15 K) / 2.55 L
T2 = 553.81 K
Converting to Celsius, we get:
T2 = 280.81°C
Therefore, the temperature must be raised to 280.81°C for the volume to be 4.50 L.
To know more about the helium refer here :
https://brainly.com/question/4945478#
#SPJ11
Respond to David Li’s letter. Explain how the groundwater system could heat the air in the school.
Explain what would happen to the air temperature at Riverdale School if the groundwater system were used. In addition to the unit vocabulary, be sure to use the terms stability and change in your explanation
The letter in response to david li's letter is-
Dear David Li,
Thank you for your letter regarding the groundwater system at Riverdale School. I am glad to hear that you are interested in this innovative system.
To answer your question, the groundwater system at Riverdale School could heat the air by utilizing the stable temperature of the groundwater. Groundwater has a relatively constant temperature throughout the year, which can be warmer than the outside air temperature during the winter. The system could pump the groundwater through a heat exchanger, which transfers the heat to the air and distributes it throughout the school.
If the groundwater system were used, the air temperature at Riverdale School would become more stable because the system would provide a constant source of heat.
This stability in temperature would be beneficial for the comfort and well-being of the students and staff. The air temperature would also change compared to the current heating system, as the groundwater system would provide a more consistent and efficient source of heat.
I hope this answers your questions about the groundwater system at Riverdale School. Please let me know if you have any further inquiries.
Sincerely,
[Your Name]
To know more about groundwater system refer to-
https://brainly.com/question/12915839
#SPJ11
Two other minerals can be seen in the photo:
galena, a dark grey mineral with the formula PbS
iron pyrite, a gold-coloured mineral with the formula FeS2
Compare their chemical formulas, by writing down one similarity and one difference between these two minerals.
Note: Pb = lead, Fe = iron, S = sulfur.
Galena and Pyrite are mineral ores.
Ore is a deposit of one or more precious minerals in the Earth's crust.
Galena is lead ore with formula PbS while pyrite is iron ore having formula FeS₂. In Other words, Galena is sulfide of lead and pyrite is sulfide of iron.
Both Galena and Pyrite are sulfide ores with different specific gravities.
Pyrite shows magnetic property on heating which galena is nonmagnetic component and doesn’t bear any magnetic properties.
Both are semi conductors but they are used for different purpose.
Learn more about Mineral ores, here:
https://brainly.com/question/89259
#SPJ1
Counting Atoms and Elements in a Chemical Formula (8. 5D)
For example, the chemical formula for water is H₂O. This tells us that there are two hydrogen atoms (H) and one oxygen atom (O) in each molecule of water. To count the number of atoms in a chemical formula, we can use the subscripts (the numbers that come after each element symbol) to determine how many atoms of each element are present. For example, in the chemical formula NaCl (which represents salt), there is one sodium (Na) atom and one chlorine (Cl) atom in each molecule.
Let us discuss this in detail. To count atoms and elements in a chemical formula, you need to understand the following terms:
- Atoms: The basic unit of a chemical element, consisting of protons, neutrons, and electrons.
- Elements: A substance that cannot be broken down into simpler substances, consisting of only one type of atom.
- Chemical Formula: A representation of a substance using symbols for its constituent elements and numbers to indicate the ratio of atoms in the compound.
Now, let's count the atoms and elements in a given chemical formula, for example, H₂O (water):
1. Identify the elements in the formula: In this case, we have two elements - Hydrogen (H) and Oxygen (O).
2. Count the atoms of each element: The subscript number next to each element symbol indicates the number of atoms of that element in the compound. For Hydrogen (H), the subscript is 2, meaning there are 2 Hydrogen atoms. For Oxygen (O), there is no subscript, which means there is only 1 Oxygen atom (when no subscript is present, it is understood to be 1).
So, in the chemical formula H₂O, there are 2 Hydrogen atoms and 1 Oxygen atom, for a total of 3 atoms.
Learn more about chemical formulas at https://brainly.com/question/11574373
#SPJ11
The method used to find the volume of acid that reacts with a known volume of alkali is called
The method used to find the volume of acid that reacts with a known volume of alkali is called acid-base titration.
In this method, a solution of known concentration (the titrant) is slowly added to a solution of unknown concentration (the analyte) until the reaction between the two is complete.
The point at which the reaction is complete is determined using an indicator or by measuring the pH of the solution. The volume of titrant required to reach this point is used to calculate the concentration of the analyte solution.
The method is widely used in analytical chemistry to determine the concentration of acids, bases, and other reactive substances in solution.
To know more about titration refer to-
https://brainly.com/question/30046193
#SPJ11
Will give brainliest no fake answers please
determine the empirical formula of a compound containing 48. 38 grams of carbon, 6. 74 grams of hydrogen, and 53. 5 grams of oxygen.
in an experiment, the molar mass of the compound was determined to be 180. 15 g/mol. what is the molecular formula of the compound?
for both questions, show your work or explain how you determined the formulas by giving specific values used in calculations
a. The empirical formula of the compound is [tex]CH_2O.[/tex] b. Moles of oxygen is 3.344 mol and c. The molecular formula of the compound is [tex]C_6H_12O_6[/tex].
To determine the empirical formula of the compound:
Convert the mass of each element to moles using its molar mass:
Moles of carbon = 48.38 g / 12.011 g/mol = 4.030 mol
Moles of hydrogen = 6.74 g / 1.008 g/mol = 6.690 mol
Moles of oxygen = 53.5 g / 15.999 g/mol = 3.344 mol
Divide each number of moles by the smallest number of moles to get the simplest whole-number ratio of atoms:
Carbon: 4.030 mol / 3.344 mol = 1.205 ≈ 1
Hydrogen: 6.690 mol / 3.344 mol = 1.999 ≈ 2
Oxygen: 3.344 mol / 3.344 mol = 1
Therefore, the empirical formula of the compound is [tex]CH_2O.[/tex]
To determine the molecular formula of the compound:
Calculate the empirical formula mass:
Mass of [tex]CH_2O.[/tex] = 12.011 g/mol + 2(1.008 g/mol) + 15.999 g/mol = 30.026 g/mol
Empirical formula mass x n = Molar mass
n = Molar mass / Empirical formula mass = 180.15 g/mol / 30.026 g/mol = 6.000
Multiply each subscript in the empirical formula by n to get the molecular formula:
Molecular formula = [tex](CH_2O)_6[/tex] = [tex]C_6H_12O_6[/tex]
Therefore, the molecular formula of the compound is [tex]C_6H_12O_6[/tex]
Learn more about empirical formula Visit: brainly.com/question/1439914
#SPJ4
During an experiment, the percent yield of calcium chloride from a reaction was
80. 34%. Theoretically, the expected amount should have been 115 grams. What was
the actual yield from this reaction? (5 points)
CaCO3 + HCI - CaCl2 + CO2 + H2O
1) 90. 1 grams
2) 92. 4 grams
3) 109. 2 grams
4) 115. 3 grams
The actual yield from the reaction was 92.4 grams. The answer is 2)
To find the actual yield of calcium chloride from the reaction, we can use the percent yield formula:
Percent Yield = (Actual Yield / Theoretical Yield) x 100%
We know that the theoretical yield of calcium chloride is 115 grams, and the percent yield is 80.34%. Rearranging the formula to solve for actual yield, we get:
Actual Yield = (Percent Yield / 100%) x Theoretical Yield
Plugging in the given values, we get:
Actual Yield = (80.34% / 100%) x 115 grams
Simplifying and solving for actual yield, we get:
Actual Yield = 92.4 grams
Therefore, the actual yield from the reaction was 92.4 grams, which is the second option in the given choices, i.e., option 2.
To know more about actual yield, refer here:
https://brainly.com/question/21925098#
#SPJ11
If your end product is 200. 0 g KMnO4 how much KOH did you start with?
If your end product is 200.0 g KMnO₄, you started with 142.1 g of KOH.
To determine how much KOH you started with if your end product is 200.0 g KMnO₄, you need to perform stoichiometric calculations using the balanced chemical equation. However, you didn't provide the reaction equation. Assuming you're referring to the reaction between MnO₂, KOH, and O₂ to form KMnO₄, the balanced equation is:
2 MnO₂ + 4 KOH + O2 → 2 KMnO₄ + 2 H2O
Here's the step-by-step explanation to find the amount of KOH you started with:
1. Find the molar mass of KMnO₄ and KOH.
KMnO₄: K (39.1 g/mol) + Mn (54.9 g/mol) + 4O (4 x 16.0 g/mol) = 158.0 g/mol
KOH: K (39.1 g/mol) + O (16.0 g/mol) + H (1.0 g/mol) = 56.1 g/mol
2. Calculate the moles of KMnO₄ produced.
moles of KMnO₄ = mass of KMnO₄ / molar mass of KMnO₄
moles of KMnO₄ = 200.0 g / 158.0 g/mol = 1.266 moles
3. Use stoichiometry to find the moles of KOH used.
From the balanced equation, 4 moles of KOH react to form 2 moles of KMnO₄. Therefore:
moles of KOH = (moles of KMnO4 x 4) / 2
moles of KOH = (1.266 moles x 4) / 2 = 2.532 moles
4. Calculate the mass of KOH used.
mass of KOH = moles of KOH x molar mass of KOH
mass of KOH = 2.532 moles x 56.1 g/mol = 142.1 g
So, if your end product is 200.0 g KMnO₄, you started with 142.1 g of KOH.
To know more about molar mass :
https://brainly.com/question/20552052
#SPJ11
what happens to a rock when its weathered? A It is moved by wind, air, or water
Fragments of weathered rocks can be moved by wind, air, or water.
What is weathering?Weathering is a natural process that breaks down rocks and minerals into smaller pieces. When a rock is weathered, it may physically or chemically change due to exposure to elements such as water, wind, ice, and temperature changes.
Physical weathering refers to the breakdown of rock through mechanical processes, such as abrasion, pressure changes, and freeze-thaw cycles.
Chemical weathering involves the breakdown of rock through chemical reactions, such as oxidation, hydrolysis, and dissolution.
In both cases, the resulting smaller pieces of rock or mineral fragments may be moved by wind, air, or water, and may be transported to new locations.
More on rock weathering can be found here: https://brainly.com/question/29762374
#SPJ1
Given the chart of bond energies, calculate the enthalpy change for the reaction below. Show all work to receive full credit.
____SO2 + ____O2 →____SO3.
How many grams of oxygen are needed to produce 16.7 g of sulfur trioxide, SO3?
The mass (in grams) of oxygen are needed to produce 16.7 g of sulfur trioxide, SO₃ is 3.34 grams
How do i determine the mass of oxygen needed?First, we shall determine the mole of sulfur trioxide, SO₃ produced. Details below:
Mass of sulfur trioxide, SO₃ = 16.7 grams Molar mass of sulfur trioxide, SO₃ = 80 g/mol Mole of sulfur trioxide, SO₃ =?Mole = mass / molar mass
Mole of sulfur trioxide, SO₃ = 16.7 / 80
Mole of sulfur trioxide, SO₃ = 0.209 mole
Next, we shall determine the mole of oxygen needed. Details below:
2SO₂ + O₂ -> 2SO₃
From the balanced equation above,
2 mole of SO₃ was produced from 1 moles of O₂
Therefore,
0.209 mole of SO₃ will be produce from = 0.209 / 2 = 0.1045 mole of O₂
Finally, we shall detemine the mass of oxygen, O₂ needed. Details below:
Molar mass of O₂ = 32 g/mol Mole of O₂ = 0.1045 moleMass of O₂ = ?Mole = mass / molar mass
0.1045 = Mass of O₂ / 32
Cross multiply
Mass of O₂ = 0.0888 × 32
Mass of O₂ = 0.178 grams
Thus, that the mass of oxygen, O₂ needed is 3.34 grams
Learn more about mass:
https://brainly.com/question/21940152
#SPJ1
If you are given a 0. 29 g piece of sodium metal to react with water, how many moles of hcl would it take to neutralize the sodium hydroxide produced?.
It would take 0.0252 moles of HCl to neutralize the sodium hydroxide produced.
The balanced equation for the reaction of sodium with water is:
[tex]2Na(s) + 2H2O(l) → 2NaOH(aq) + H2(g)[/tex]
From this equation, we can see that 2 moles of NaOH are produced for every mole of Na that reacts.
The molar mass of Na is 22.99 g/mol. Therefore, 0.29 g of Na represents:
0.29 g / 22.99 g/mol = 0.0126 mol Na
So, this amount of sodium will produce:
2 x 0.0126 mol NaOH = 0.0252 mol NaOH
Since NaOH is a strong base, it will completely react with HCl in a 1:1 ratio according to the equation:
[tex]NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)[/tex]
So, 0.0252 mol of NaOH will react with 0.0252 mol of HCl.
Therefore, it would take 0.0252 moles of HCl to neutralize the sodium hydroxide produced.
To know more about neutralize refer to-
https://brainly.com/question/27891712
#SPJ11