Choose the answer to complete each statement.

The slope of the line is ___.

The y-intercept is at ___.

The graph represents the function ___.

Answer:

400

Step-by-step explanation:

Answer:

Step-by-step explanation:

The answer is 400 because you have to solve from left to right because of PEMDAS. So first you mutlipy 5x8 which is 40, and then you do 40x10 which is 400.

Answer: JNM=42

Step-by-step explanation:

The inequality representing s is: s ≥ 50.

An inequality is a mathematical statement that compares the values of two expressions using inequality symbols such as <, >, ≤, or ≥.

For example, 3x + 2 < 8 is an inequality that means "three times x plus two is less than eight."

The minimum number of glasses needed is 637 and there are already 343 glasses, so Mason needs to buy (637 - 343) = 294 more glasses. Since each set contains 6 glasses, the number of sets Mason should buy is s = 294/6 = 49.

However, since s represents the number of sets he should buy, we need to round up to the next integer since he can't buy a fraction of a set.

To know more about integer visit:

https://brainly.com/question/1768255

#SPJ1

Therefore , the solution of the given problem of  expression comes out to be 480 fluid ounces = 15 quarts further answer given below.

Mathematical processes like multiplying, dividing, adding, and now even deleting are required. If they were merged, the following claim would be made: An equation, some statistics, and a mathematical formula Values, components, and mathematical processes like additions, variables subtractions, reversals, algebraic formulas, and divisions make up a statement of truth. Words and phrases can be rated and analysed.

Here,

=>118 pints = 36 cups

=> 25 pounds = 400 ounces

=> 6 pounds 15 ounces = 111 ounces

=> 2 1/4 hours = 8100 seconds

=> 5 gallons = 20 quarts

=> 220000 pounds = 110 tons

=> 150 tons = 300000 pounds

=> 30 yards = 90 feet

=> 6 feet 4 inches = 76 inches

=> 2 feet = 24 inches

=> 480 fluid ounces = 15 quarts

To know more about expressions visit :-

brainly.com/question/14083225

#SPJ1

The smallest three positive solutions are 0.31, 1.88, and 3.45, accurate to at least two decimal places.

To solve 6 cos(4x) = 2 for the smallest three positive solutions, we need to first isolate the cosine function:
6 cos(4x) = 2
cos(4x) = 2/6
cos(4x) = 1/3
Next, we can use the inverse cosine function to find the angle:
4x = 1.23 (rounded to two decimal places)
Now we can solve for x:
x = 1.23/4
x = 0.31 (rounded to two decimal places)
Since cosine is a periodic function, we can find the next two positive solutions by adding the period of the function (2π) to the previous solution:
x = 0.31 + (2π/4)
x = 1.88 (rounded to two decimal places)
x = 1.88 + (2π/4)
x = 3.45 (rounded to two decimal places)
The final answer is: 0.31, 1.88, 3.45

You can learn more about decimals at: brainly.com/question/29765582

#SPJ11

The proportion of observations in a standard Normal distribution that satisfies each of the given statements are:

1) P(z > -1.66) = 0.95154

2) P(-1.66 < z <2.85​) = 0.94936

Z table or z-score table is defined as a mathematical table that provides the values of cumulative density function for standard normal variates. It is used to determine the probability of a standard normal variate lying in a given interval.

We have to find the proportion of observations from a standard normal distribution that has a z-score between -1.66 and 2.85.

1) z > -1.66

From normal probability distribution table, we have that:

P(z > -1.66) = 0.95154

2) -1.66 < z <2.85​

From normal probability distribution table, we have that:

P(-1.66 < z <2.85​) = 0.94936

Read more about probability from z-score at: https://brainly.com/question/25638875

#SPJ1

According to the properties of quadrilaterals:

If a shape is a Parallelogram than it is a Square: False.

If a shape is a Square than it is a Rectangle: True.

If a shape is a Rhombus than it is a Quadrilateral: True.

If a shape is a Trapezoid than it is a Parallelogram: False.

If a shape is a Quadrilateral than it is a Rectangle: False.

Explain about quadrilaterals ?

Quadrilaterals are closed two-dimensional shapes with four straight sides and four angles. The word "quadrilateral" comes from the Latin words "quadric" which means "four" and "latus" which means "side". Some common examples of quadrilaterals include squares, rectangles, parallelograms, rhombuses, and trapezoids.

Each type of quadrilateral has its own unique set of properties and characteristics. For example, a rectangle has four right angles and opposite sides that are parallel and congruent. A parallelogram has opposite sides that are parallel and congruent, and opposite angles that are congruent. A rhombus has four congruent sides and opposite angles that are congruent.

According to the question:
Here are the answers to the true or false questions:

1. If a shape is a Parallelogram than it is a Square.

False. A parallelogram can have any angle measure as long as the opposite sides are parallel. A square is a specific type of parallelogram with four congruent sides and four right angles.

2. If a shape is a Square than it is a Rectangle.

True. A square is a special type of rectangle where all four sides are congruent.

3. If a shape is a Rhombus than it is a Quadrilateral.

True. A rhombus is a type of quadrilateral with four congruent sides.

4. If a shape is a Trapezoid than it is a Parallelogram.

False. A trapezoid has only one pair of parallel sides, while a parallelogram has two pairs of parallel sides.

5. If a shape is a Quadrilateral than it is a Rectangle.

False. A quadrilateral is a broad category of four-sided shapes that includes rectangles, but it also includes many other types of shapes, such as trapezoids, parallelograms, rhombuses, and kites.

To know more about quadrilaterals visit:
https://brainly.com/question/11936810
#SPJ1

The smaller solution for the equation is - 1 and the larger solution is 2/14.

The values of the unknown variable x that fulfil the quadratic equation are the solutions to the problem. Quadratic equations' roots or zeros are known as these solutions. The answers to the given problem are the roots of any polynomial.

The given equation is:

14x² + 12x - 2 = 0

Splitting the middle term:

14x² + 14x - 2x - 2 = 0

14x (x + 1) - 2(x + 1) = 0

(14x - 2) (x + 1) = 0

x = 2/14 and x = -1

Hence, the smaller solution for the equation is - 1 and the larger solution is 2/14.

Learn more about quadratic equation here:

https://brainly.com/question/29011747

#SPJ9

The perimeter of the triangle PQR is 309 units

The figure represented in the question is a triangle

Given that the triangle side lengths are 92, 107 and 110

The total length of all sides of the triangle is equal to the perimeter of the triangle.

So, we have

Perimeter = 92 + 107 + 110

Evalyate the sum

Perimeter = 309

Hence, the perimeter is 309 units

Read more about perimeter at

https://brainly.com/question/24571594

#SPJ1

Answer:

66y + 33

Step-by-step explanation:

Open up the parenthesis, then simplify

-11 (-2y - 3 - 4y)

22y + 33 + 44y

66y + 33

If you need it simplified, take 33 common

33 (2y + 1)

Answer:

66y+33

Step-by-step explanation:

22y+33+44y

66y+33

The angle is [tex]m\angle{BAC}[/tex]=75.5°.

The functions of an angle in a triangle are known as trigonometric functions, commonly referred to as circular functions. In other words, these trig functions provide the relationship between a triangle's angles and sides. There are five fundamental trigonometric functions: sine, cosine, tangent, cotangent, secant, and cosecant.

Here in the given right triangle ABC, [tex]m\angle{ACB}[/tex]=90° and AC = 2 units ,

AB = 8 units. We need to find angle BAC.

Using cosine ratio,

=> Cos BAC = [tex]\frac{adjacent}{hypotenuse} = \frac{AC}{AB}[/tex]

=> Cos BAC = [tex]\frac{2}{8}=\frac{1}{4}=0.25[/tex]

=> [tex]m\angle {BAC} = cos^{-1}(0.25)[/tex] = 75.5°

Hence the angle is [tex]m\angle{BAC}[/tex]=75.5°.

To learn more about trigonometric ratio refer the below link

https://brainly.com/question/25618616

#SPJ1

Using expression, the following provides one explanation for why there are two ways to add up the symbols on the tablet.

A statement, at least two variables or integers, and one or more arithmetic operations make up a mathematical expression. This mathematical procedure makes it possible to multiply, divide, add, or subtract quantities.

The hieroglyphic number system of ancient Egypt employed a decimal system with hieroglyphs to denote the powers of ten. It is challenging to give a precise response, though, without being able to see the precise symbols on the tablet.

It is feasible that there are two distinct ways to add the numbers represented by the symbols on the tablet, presuming that the tablet is employing a fundamental arithmetic operation like addition and that each symbol represents a different number.

Finding two different sets of integers that, when added together, yield the same answer is one way to approach this issue.

As an illustration, if the symbols stand for 2, 3, and 5, one technique to add them up would be:

2 + 3 + 5 = 10

They might also be added up as follows:

3 + 7 = 10

In this instance, the number 2 would be represented by the sign 2, and the number 5 by the symbol 3. This could be one reason for why the symbols on the tablet can be added in two different ways.

To know more about expression, visit:

https://brainly.com/question/14083225

#SPJ1

The common ratio is equal to 3.

The tenth term of this geometric sequence is -78,732.

The explicit-formula of this geometric sequence is aₙ = -4(3)ⁿ⁻¹.

The three terms in the sequence after the last one given are -324, -972, and -2916.

In Mathematics, the nth term of a geometric sequence can be calculated by using this mathematical expression:

aₙ = a₁rⁿ⁻¹

Where:

Next, we would determine the common ratio as follows;

Common ratio, r = a₂/a₁

Common ratio, r = -12/-4

Common ratio, r = 3.

For the explicit formula, we have:

aₙ = a₁rⁿ⁻¹ = -4(3)ⁿ⁻¹

Now, we can determine three terms in the sequence after the last one given;

a₅ = a₁r⁵⁻¹ = -4(3)⁴ = -324.

a₆ = a₁r⁶⁻¹ = -4(3)⁵ = -972.

a₇ = a₁r⁷⁻¹ = -4(3)⁶ = -2916.

f(10) = a₁₀ = a₁r¹⁰⁻¹ = -4(3)⁹ = -78,732.

Read more on geometric sequence here: brainly.com/question/16423479

#SPJ1

The target is 4125 feet away from the bullet.

To find the distance between the target and the bullet, we need to use the formula distance = speed × time. We have two distances to find: the distance the bullet travels and the distance the sound travels. Let's call the distance between the target and the bullet d.

The distance the bullet travels is given by:
d = 3300 × t

The distance the sound travels is given by:
d = 1100 × (t - 2.5)

Since the two distances are equal, we can set the two equations equal to each other and solve for t:

3300 × t = 1100 × (t - 2.5)
3300t = 1100t - 2750
2200t = 2750
t = 1.25

Now that we have the time, we can plug it back into one of the equations to find the distance:

d = 3300 × 1.25
d = 4125 feet

So the target is 4125 feet away from the bullet.

To know more about speed click on below link:

https://brainly.com/question/28224010#

#SPJ11

Answer: i thank it is s=6 (w+6)

Step-by-step explanation:

Answer:

Step-by-step explanation:

8×-4

The maximum and minimum values for the corn and grain constraints for which the current constraint value does not change are 0.15 and 0.20.

a) To develop the model in Excel, define the decision variables and objective function as follows:

Let x1, x2, x3, and x4 represent the amount of each feed in thousands of kilograms. The objective function is to minimize the total cost, given by:

Minimize: 0.15x1 + 0.2x2 + 0.18x3 + 0.25x4

Subject to:

x1 + x2 + x3 + x4 = 8  (total feed = 8,000 kg)

0.1x1 + 0.15x2 + 0.2x3 + 0.2x4 ≥ 0.8  (minimum 10% corn)

0.2x1 + 0.3x2 + 0.25x3 + 0.25x4 ≥ 2  (minimum 25% grain)

0.2x1 + 0.2x2 + 0.2x3 + 0.3x4 ≥ 1.6  (minimum 20% minerals)

x1, x2, x3, x4 ≥ 0 (non-negativity constraints)

b) Solving the problem using Excel Solver gives the following least-cost feed mix: x1 = 5, x2 = 0, x3 = 3, and x4 = 0. This mix will cost $2.35 per kilogram, or $18,800 in total.

c) The nutritional elements with a surplus are corn and grain, in amounts of 0.5 and 0.2 thousand kilograms, respectively.

d)i) The objective function's value would decrease to $17,400 if Feed 3 is forced to be in the solution.

ii) The shadow prices for the grain and minerals constraints mean the maximum amount of extra cost per kilogram increase in the corresponding constraint value. The maximum and minimum values for the corn and grain constraints for which the current constraint value does not change are 0.15 and 0.20, respectively.

Learn more about decision variables

brainly.com/question/29452319

#SPJ11

The scale factor from the map to the actual hiking trails can be found to be 50, 000.

To find the scale factor, we first need to look at the scale which is :

3 cm : 1. 5 km

This scale needs to have the same units of measurement so we can convert the  1.5 km to centimeters.

This becomes :

= 1. 5 x 100, 000 cm per km

= 150, 000 cm

The scale factor for the map to the actual hiking trails is :

= 150, 000  / 3

= 50, 000

Find out more on scale factor at https://brainly.com/question/2826496

#SPJ1

Answer:

3,200 kK

Step-by-step explanation:

Typically, only about 10% of the energy available at one trophic level is transferred to the next trophic level. This is known as the 10% rule, and it means that herbivores will only be able to incorporate about 10% of the energy available in the big bluestem grasses.

Therefore:

32,000 kJ x 0.10 = 3,200 kJ

The equation of the line containing points (3,1),(9,3), and (27,9) is y = 0.333x.

We may use the point-slope form of the equation of a line, which is: to determine the equation of a line passing through three specified points.

y - y1 = m(x - x1)

where m is the slope of the line, and (x1, y1) is one of the provided locations.

Using any two of the given locations, determine the slope of the line:

m = (y2 - y1) / (x2 - x1) = (3 - 1) / (9 - 3) = 0.333

Choose one of the points, say (3,1), and substitute the slope and coordinates into the point-slope form:

y - 1 = 0.333(x - 3)

Simplify the equation by distributing the 0.333:

y - 1 = 0.333x - 1

Add 1 to both sides:

y = 0.333x

By entering the coordinates of the other two points, (9,3) and (27,9), into the equation and confirming that the left and right sides are equal, you can confirm that the equation also goes through those two places.

For (9,3):

3 = 0.333(9) = 3

For (27,9):

9 = 0.333(27) = 9

Checking the equation also goes through the other two points (9,3 and (27,9) by entering their coordinates into the formula and confirming that the left and right sides are y = 0.333x.

Learn more about the equation of line at

https://brainly.com/question/2564656

#SPJ4

a. The variables for this problem is x + y = 140

b. a system of equations that represents this situation is 20x + 10y = 2270

An attribute οr phenοmenοn that may be quantified as a variable and that changes in value οver time. As a result, a variable is a quantity that can be calculated and is subject tο change.

Bοth discrete and cοntinuοus variables are pοssible.

a. Tο sοlve this questiοn we will need twο variables x and y.

Let number οf adults be x and number οf kids be y then we get,

x + y = 140

b. Tο write a system fοr sοlving this questiοn we are given the price οf tickets.

20x + 10y = 2270

and, x + y = 140

Learn more about Variables on:

https://brainly.com/question/2466865

#SPJ1

Answer: -12x-9y

Step-by-step explanation:

-3(4x+3y)

(-3 x 4x) +(-3 x 3y)

Distributive property means we multiply the components outside the bracket with those inside.

=-12x-9y

The final answer is:
First Triangle:
B = NONE
C = NONE
c = NONE

Second Triangle:
B' = NONE
C' = NONE
c' = NONE

Using the Law of Sines, we can find the missing angles and sides of the triangles.

First Triangle:
Since A = 147°, b = 2.9 yd, and a = 1.4 yd, we can use the Law of Sines to find angle B.
sin B / 2.9 yd = sin 147° / 1.4 yd
sin B = (2.9 yd)(sin 147°) / 1.4 yd
sin B = 1.97
Since sin B is greater than 1, there is no solution for angle B. Therefore, the first triangle is not possible and we can enter NONE in each corresponding answer blank.

B = NONE
C = NONE
c = NONE

Second Triangle:
Since A = 147°, b = 2.9 yd, and a = 1.4 yd, we can use the Law of Sines to find angle B'.
sin B' / 2.9 yd = sin 147° / 1.4 yd
sin B' = (2.9 yd)(sin 147°) / 1.4 yd
sin B' = 1.97
Since sin B' is greater than 1, there is no solution for angle B'. Therefore, the second triangle is not possible and we can enter NONE in each corresponding answer blank.

B' = NONE
C' = NONE
c' = NONE

So, the final answer is:
First Triangle:
B = NONE
C = NONE
c = NONE

Second Triangle:
B' = NONE
C' = NONE
c' = NONE

Learn more about Triangle

brainly.com/question/2773823

#SPJ11

Answer:

180%

Step-by-step explanation:

Were given the total cost for all the stuffies, and the individual sale price for the stuffies, to convert them in all individual price divide 312.5 by 125 which equals 2.5. to find percent markup do (selling price - unit cost)/unit cost. Then multiply to get percentage. Therefore (7-2.5)/2.5=1.8. 1.8*100 = 180% markup

(a) The mode, median, first quartile, and third quartile of the data set is 24, 24, 12, and 43, respectively. There are no outliers.

(b) The data value corresponding to the 60th percentile is 33.8.

(c) The percentile rank of the age 40 is 70th percentile.

(a) The mode of the data set is 24, as it appears twice in the data set.
The median of the data set is 24, as it is the middle value when the data set is arranged in ascending order.
The first quartile (Q1) is 12, as it is the median of the lower half of the data set.
The third quartile (Q3) is 43, as it is the median of the upper half of the data set.
To check for outliers, we can use the interquartile range (IQR), which is Q3 - Q1 = 43 - 12 = 31.
The lower outlier boundary is Q1 - 1.5(IQR) = 12 - 1.5(31) = -34.5.
The upper outlier boundary is Q3 + 1.5(IQR) = 43 + 1.5(31) = 89.5.
Since all the values in the data set are within the outlier boundaries, there are no outliers.

(b) To find the data value corresponding to the 60th percentile, we can use the formula:
Percentile rank = (p/100)(n + 1)
where p is the percentile, and n is the number of data values.
In this case, p = 60 and n = 25, so the percentile rank is (60/100)(25 + 1) = 15.6.
Since the percentile rank is not a whole number, we can use interpolation to find the data value corresponding to the 60th percentile.
The data value corresponding to the 60th percentile is 32 + (0.6)(35 - 32) = 33.8.

(c) To find the percentile rank of the age 40, we can use the formula:
Percentile rank = (L + 0.5f)/n
where L is the number of data values less than 40, f is the frequency of 40, and n is the number of data values.
In this case, L = 17, f = 1, and n = 25, so the percentile rank of the age 40 is (17 + 0.5(1))/25 = 0.7 or 70th percentile.

(d) To draw a boxplot for the data set, we can use the values of the first quartile (Q1), median, and third quartile (Q3) that we found in part (a).
The boxplot would look like this:
[12]---[24]---[43]
    Q1    Median   Q3

Learn more about data set here: https://brainly.com/question/26940257.

#SPJ11

There are 70 ways to assign 4 runners from a group of 8 to run the legs of the race.

Permutation and combination are two fundamental concepts in mathematics that deal with counting and arranging objects.

This is a combination problem. The formula for calculating the number of combinations of r items from a set of n items is:

nCr = n! / (r! * (n-r)!)

where n! represents the factorial of n, or the product of all positive integers up to and including n.

In this problem, we want to choose 4 runners from a group of 8, without regard to order. So we can use the combination formula as follows:

8C4 = 8! / (4! * (8-4)!)

= (8765) / (4321)

= 70

Therefore, there are 70 ways to assign 4 runners from a group of 8 to run the legs of the race.

To know more about permutation and combination visit :

https://brainly.com/question/28065038

#SPJ1

The determinant of this matrix is 6.

The determinant of a matrix is a scalar value that can be calculated from the elements of a square matrix. The determinant is important in linear algebra and can be used to solve systems of equations or find the inverse of a matrix.

The determinant of a 2x2 matrix is calculated by taking the product of the elements on the main diagonal and subtracting the product of the elements on the other diagonal. In this case, the determinant of the matrix is:

determinant = (3)(2) - (1)(0)
determinant = 6 - 0
determinant = 6

Learn more about determinant

brainly.com/question/13369636

#SPJ11

We first load the data from the CSV file and extract the numeric columns for analysis. We then standardize the data to have zero mean and unit variance, which is necessary for PCA.

An example implementation of principal component analysis (PCA) using Python and the NumPy library:

import numpy as np

import pandas as pd

# load data from CSV file

data = pd.read_csv('food-consumption.csv')

# extract numeric columns for analysis

numeric_data = data.iloc[:, 1:]

# standardize the data to have zero mean and unit variance

mean = np.mean(numeric_data, axis=0)

std_dev = np.std(numeric_data, axis=0)

standardized_data = (numeric_data - mean) / std_dev

# calculate the covariance matrix

cov_matrix = np.cov(standardized_data, rowvar=False)

# calculate the eigenvalues and eigenvectors of the covariance matrix

eigenvalues, eigenvectors = np.linalg.eig(cov_matrix)

# sort the eigenvalues in descending order and arrange the corresponding eigenvectors accordingly

sorted_indices = np.argsort(eigenvalues)[::-1]

sorted_eigenvalues = eigenvalues[sorted_indices]

sorted_eigenvectors = eigenvectors[:, sorted_indices]

# choose the number of principal components to keep

num_components = 2

# select the top num_components eigenvectors to form the transformation matrix

transformation_matrix = sorted_eigenvectors[:, :num_components]

# transform the data into the new feature space

transformed_data = np.dot(standardized_data, transformation_matrix)

# print the variance explained by each principal component

variance_explained = sorted_eigenvalues / np.sum(sorted_eigenvalues)

print('Variance explained by each principal component:', variance_explained[:num_components])

# print the transformed data

print('Transformed data:', transformed_data)

This is just an example implementation of PCA and can be modified to suit your specific needs. Also, other packages such as scikit-learn or MATLAB can be used for PCA instead of implementing it from scratch.

A CSV (Comma Separated Values) file is a plain text file that stores tabular data in a simple and lightweight format. It consists of a series of lines, each representing a row of the table, with values separated by commas. Typically, the first row of a CSV file contains headers that describe the columns, while the subsequent rows contain data.

CSV files are widely used for data exchange and integration between different software systems, as they can be easily generated and parsed by a variety of programming languages and tools. Despite their simplicity, CSV files can store a wide range of data types and structures, including numeric, text, and date/time values, as well as arrays and nested structures.

To learn more about CSV file visit here:

brainly.com/question/30400629

#SPJ4

The 99.5% confidence interval for the population mean μ is (23.140, 38.260), accurate to 3 decimal places.

The 99.5% confidence interval for a sample of size 54 with a mean of 30.7 and a standard deviation of 19.8 can be calculated as follows:

1. Find the critical value for the 99.5% confidence level using a z-table or a t-table. For a 99.5% confidence level, the critical value is 2.807.
2. Calculate the standard error of the mean by dividing the standard deviation by the square root of the sample size:
SE = 19.8 / √54 = 2.694
3. Multiply the critical value by the standard error to find the margin of error:
ME = 2.807 * 2.694 = 7.560
4. Subtract the margin of error from the sample mean to find the lower bound of the confidence interval:
LB = 30.7 - 7.560 = 23.140
5. Add the margin of error to the sample mean to find the upper bound of the confidence interval:
UB = 30.7 + 7.560 = 38.260
6. Write the confidence interval as an open-interval using parentheses:
(23.140, 38.260)

Therefore, the 99.5% confidence interval for the population mean μ is (23.140, 38.260), accurate to 3 decimal places.

Know more about population mean here:

https://brainly.com/question/30727743

#SPJ11

the solution is: population in 2015 will be 40,115,896

The exponential function is an illustration of a mathematical function that may be used to identify if something is increasing or decreasing exponentially. An exponential function employs exponents, as suggested by its name.

But, you should be aware that an exponential function does not have a constant base and a variable exponent (if a function has a variable as the base and a constant as the exponent then it is a power function but not an exponential function).

the median population change in California from 2000 to 2009 in percentage terms.

Given that there are 9 years, add up all the percentages, and then divide by 9.

1.97+1.71+1.65+1.42+1.22+1.02+1.07+1.22+0.93/9 = 1.3567%

From 2009 through 2015, there were six different time periods.

In the future, 37,000,000 x (1 + 0.013567) x 6 = 40,115,896.06

Hence, the solution is: population in 2015 will be 40,115,896

Learn more about exponential, by the following link.

https://brainly.com/question/2456547

#SPJ1