can someone help me with 5-20?

Copper (ii) nitrate is deliquescent and absorbs moisture from the atmosphere. Therefore, no crystals of copper (ii) nitrate are formed after several days.

Deliquescent substances are substances which when exposed to the atmosphere absorb moisture from the atmosphere to form solutions.

During the preparation of copper (ii) nitrate from copper (ii) carbonate and dilute nitric acid, the product formed is copper (ii) nitrate solution and carbon dioxide is evolved.

The equation of the reaction is given below:

CuCO₃ + HNO₃ → Cu(NO₃)₂ + H₂O + CO₂

In the preparation of copper (II) sulfate crystals, the procedure involves  adding copper (ii) carbonate to dilute sulfuric acid and warming the resulting solution to drive off some of the water and then leaving the solution to crystallize.

However, unlike copper (ii) sulfate, copper (ii) nitrate is deliquescent, and as such, it absorbs ,moisture continuously from the atmosphere. Thus, no crystals of copper (ii) nitrate are formed after several days.

Learn more about deliquescence at: https://brainly.com/question/25353839

#SPJ1

b bbbbbbbbbbbbbbbbbbbbbbbbbb

Answer:

Explanation:

The height of the object can be found by using the formula

[tex]h = \frac{p}{mg } \\ [/tex]

where

p is the potential energy

m is the mass

h is the height

g is the acceleration due to gravity which is 10 m/s²

From the question we have

[tex]h = \frac{23048}{39 \times 10} = \frac{23048}{390} \\ = 59.0974...[/tex]

We have the final answer as

Hope this helps you

hey sisterrrrrrrrrr its ginger charles here i hear you looking for the answer well this is your lucky day the answer is

Explanation:

The concentration of Bovine Hb with absorbance 0.7 at 570 nm has been 2.264 [tex]\mu[/tex]M.

According to Beer's law, the absorbance of the sample can be given by:

Absorbance = Extinction coefficient [tex]\rm \times[/tex] concentration [tex]\times[/tex] path length

The Bovine Hb has the extinction coefficient = 30910 L/mol/cm

The absorbance = 0.7

The path length has been 1 cm.

The concentration of the Bovine Hb can be given as:

0.7 = 30910 [tex]\times[/tex] concentration [tex]\times[/tex] 1

The concentration of Bovine Hb = 2.264 [tex]\rm \times\;10^-^6[/tex] moles/L

The concentration of Bovine Hb = 2.264 [tex]\rm \mu[/tex]moles/L

The concentration of Bovine Hb = 2.264 [tex]\mu[/tex]M.

For more information about the concentration on the basis of absorbance, refer to the link:

https://brainly.com/question/23019109

Answer:

[tex]20.33\times 10^{26}[/tex] atoms

Explanation:

Given that,

Given mass = 13200 g

Molar mass of potassium = 39.0983 g/mol

Let there are n number of moles. It is equal to mass divided by molar mass. It is equal to :

[tex]n=\dfrac{13200}{39.0983 }\\\\=337.61\ \text{mol}[/tex]

Let there are x atoms in 13200 g of potassium (k). It can be calculated  :

[tex]x=n\times N_A\\\\=337.61\times 6.023\times 10^{23}\\\\=20.33\times 10^{26}[/tex]

So, there are [tex]20.33\times 10^{26}[/tex] atoms.

Answer:1)1.99 M

Explanation:

Molarity  is given as = moles solute/Liter solution

The solute which is LiOH is already given in moles as 1.495 moles

Given that solution  is  750 mL,  we convert to liters.

Liters of the solution=  mL of the solution   x (1 L/1000 mL)

750 mL x (1 L/1000 mL)

0.75 L

Molarity = moles solute/Liter solution

Molarity = 1.495 moles of LiOH/0.75 L of solution

Molarity = 1.99M

The molarity of this solution is 1.99M (moles per liter).

Answer:

89.1942....

Explanation:

abundance x mass on each one, the added all together:

77.742+6.201+5.251

Answer:

I got

−

902 kJ

for the reaction as-written. How would you rewrite this into

kJ/mol NH

3

?

The standard molar enthalpy of formation is for the formation of

1 mol

of product from its elements as they exist in nature at

25

∘

C

and

1 atm

. For example...

1

2

N

2

(

g

)

+

3

2

H

2

(

g

)

→

NH

3

(

g

)

,

Δ

H

∘

f

(

NH

3

(

g

)

)

=

−

45.9 kJ/mol

But that also means formation of elements in their standard states must yield zero enthalpy change:

1

2

O

2

(

g

)

→

1

2

O

2

(

g

)

,

Δ

H

∘

f

(

O

2

(

g

)

)

=

0

That means we can simply derive from Hess's law and that fact to get:

Δ

H

∘

r

x

n

=

∑

P

n

P

Δ

H

∘

f

,

P

−

∑

R

n

R

Δ

H

∘

f

,

R

where

n

indicates the mols of product

P

or reactant

R

. Here we actually have just summed many formation reactions together that we know have

Δ

H

∘

r

x

n

=

Δ

H

∘

f

.

Here we have:

Δ

H

∘

r

x

n

=

[

4 mols NO

(

g

)

⋅

Δ

H

∘

f

,

N

O

(

g

)

+

6 mols H

2

O

(

g

)

⋅

Δ

H

∘

f

,

H

2

O

(

g

)

]

−

[

4 mols NH

3

(

g

)

⋅

Δ

H

∘

f

,

N

H

3

(

g

)

+

0 kJ/mol

]

where we have set a zero contribution

O

2

(

g

)

right off the bat.

=

[

4 mols NO

(

g

)

⋅

91.3 kJ/mol

+

6 mols H

2

O

(

g

)

⋅

−

241.8 kJ/mol

]

−

[

4 mols NH

3

(

g

)

⋅

−

45.9 kJ/mol

+

0 kJ/mol

]

=

[

−

1085.6 kJ

]

−

[

−

183.6 kJ

]

=

−

902 kJ

for the reaction as-written.

Explanation:

To calculate the molar mass of  [tex]\rm Cr_3(AsO_4)^2[/tex], we need to determine the sum of the atomic masses of all the individual atoms in the compound.

The atomic masses of the elements are as follows:

Cr (chromium) = 52.00 g/mol

As (arsenic) = 74.92 g/mol

O (oxygen) = 16.00 g/mol

Now, let's calculate the molar mass of [tex]\rm Cr_3(AsO_4)^2[/tex]:

Molar mass of Cr3(AsO4)2

= (3 * molar mass of Cr) + (2 * molar mass of As) + (8 * molar mass of O)

                        = (3 * 52.00 g/mol) + (2 * 74.92 g/mol) + (8 * 16.00 g/mol)

                        = 156.00 g/mol + 149.84 g/mol + 128.00 g/mol

                        = 433.84 g/mol

Therefore, the molar mass of  [tex]\rm Cr_3(AsO_4)^2[/tex] is 433.84 g/mol.

Know more about atomic masses:

https://brainly.com/question/29117302

#SPJ6

Answer:

The answer is "Option b".

Explanation:

[tex]\to \text{number of moles} = \frac{\text{number of atoms}}{\text{avogadro number}}[/tex]

                               [tex]= \frac{7.0 \times 10^{19}}{6.0221 \times 10^{23}}\\\\= 1.16 \times 10^{-4} \ moles\\\\ =1.2 \times 10^{-4} \ moles[/tex]

[tex]\to \text{sample mass}= \text{number of moles} \times \text{molar mass}[/tex]

                        [tex]=1.16 \times 10^{-4}\times 58.9\\\\=0.00685 \\\\ = 6.85\ g[/tex]

Answer:

2:1

Explanation:

Water molecules feature the combinations of hydrogen and oxygen atoms in a 2:1 ratio.

Answer:

d) none of the above

Explanation:

The law that describes the relationship between pressure and volume of an ideal gas (under constant temperature and amount of substance) is Boyle's law.

It states that pressure is inversely proportional to the volume. This would mean that a graph of P vs 1/V would be a line.

See the attached picture for a graph of P vs V.

A plot of pressure VS. volume for an ideal gas will result in d) none of the above

The following things should be considered:

Therefore we can conclude that a plot of pressure VS. volume for an ideal gas will result in d) none of the above

Learn more: brainly.com/question/23334479

Answer:

P₂ = 2.60 atm

Explanation:

Given data:

Initial pressure = 2.38 atm

Initial temperature = 25.0 °C

Final pressure = ?

Final temperature = 52.78°C

Solution:

Initial temperature = 25.0 °C (25.0+273 = 298 K)

Final temperature = 52.78°C (52.78+273 = 325.78 K)

According to Gay-Lussac Law,

The pressure of given amount of a gas is directly proportional to its temperature at constant volume and number of moles.

Mathematical relationship:

P₁/T₁ = P₂/T₂

Now we will put the values in formula:

2.38 atm / 298 K = P₂/325.78 K

P₂ = 2.38 atm × 325.78 K  / 298 K

P₂ = 775.35 atm. K /293 K

P₂ = 2.60 atm

Answer:

40$$$

Explanation:

Reason: 300 miles × 1gallon30miles × $4.001gallon = $40

Answer:

76.1%

Explanation:

The reaction that takes place is:

First we determine how many moles of each reactant were added:

Thus K₂SO₄ is the limiting reactant.

Using the moles of the limiting reactant we calculate how many moles of BaSO₄ would have been produced if the % yield was 100%:

Then we convert that theoretical amount into grams, using the molar mass of BaSO₄:

Finally we calculate the % yield:

Taking into account the definition of density, the mass of grlycerol required is 3.9816 g.

Density is a quantity that is defined as the measurement of the amount of mass in a given volume of a substance.

Then, the expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:

density= mass÷ volume

You can observe that density is inversely proportional to volume: the smaller the volume occupied by a given mass, the higher the density.

In this case, you know that:

Replacing in the definition of density:

1.26 g/cm³= mass÷ 3.16 cm³

Solving:

mass= 1.26 g/cm³  ×3.16 cm³

mass= 3.9816 g

In summary, the mass of grlycerol required is 3.9816 g.

Learn more about density:

brainly.com/question/952755

brainly.com/question/1462554

#SPJ1

Answer:

In a climatological sense, dryness is a function of both annual rainfall and evaporation

Moving material along certain gradients is necessary for osmosis, diffusion, filtration, and the transport of ions away from similar charges.

Osmosis is the flow of solvent molecules over a semi-permeable membrane from an area of lower concentration to a region of higher concentration Molecules diffuse when they travel from one area of higher concentration to another area of lower concentration The process of filtering involves moving liquid substances through a separating material known as a filter in order to separate solid particles from liquid. Due to the difference in pressures between the solid and liquid substances, this process is made feasible. Because of the difference in electrical potentials between the charges, ions move away from like charges.

Learn more about Osmosis here-

https://brainly.com/question/1799974

#SPJ9

Answer: Magnesium

Magnesium, in its elemental form, has 12 protons and 12 electrons. The neutrons are a different matter. Magesium's average atomic mass is 24.305 atomic mass units, but no magnesium atom has exactly this mass.

Hope this helps....... Stay safe and have a Merry Christmas!!!!!!!! :D

Answer:

Explanation:

1) The ΔH shows the heat of reaction of the reaction illustrated in the question and the negative sign shows the reaction is an exothermic reaction, meaning heat is released in this reaction. The amount of heat released in this reaction is 851.5 kilojoules per mole of Al₂O₃ produced.

2) The thermal energy of this reaction is however very low when compared to the energy released when 2 moles of protons and 2 moles of neutrons combine to form 1 mole of alpha particles. This is because, the reaction illustrated in the (1) above is a normal chemical reaction while the one that involves the protons and neutrons (as described in this section 2) is a nuclear reaction which involves large amount of energy. Nuclear reactions usually involve way larger amount of energy than ordinary chemical reactions.

Answer:

It loses electrons.

Explanation:

When an atom is oxidized in a redox reaction, it simply loses electrons and the oxidation number increases.

An oxidized atom implies that oxidation has occurred; oxidation can be defined as:

D. It loses electrons

Here's how it works!

Oxidation occurs when an atom, molecule, or ion loses one or more electrons. In the process of oxidation, the oxidation state of the chemical species increases. Originally, the term was used to describe when oxygen caused electron loss in reactions. I hope that helps you!

Which statement describes how the binary ionic compound KBr is named? The metal is named first, and the name is unchanged. Which of these is a property of a substance that is composed of atoms that are held together by ionic bonds?

B. The metal is named first and the name is unchanged.

Answer: -2 because it gains 2 electrons

Explanation:

An ion is considered to be an atom which is formed by gain or loss of electrons.

The ions are classified into two which are called the cation and anion.

The cation is classified as the positive charge formed by loss of electrons.

The anion is classified as the negative charge ion formed by gain of electrons.

On gaining two electrons, the atom would occupy -2 charge.

Answer:

carbohydrates, lipids, proteins, and nucleic acids.

Explanation:

Carbohydrates serve several key functions in your body. They provide you with energy for daily tasks and are the primary fuel source for your brain's high energy demands.

The functions of lipids include storing energy, signaling, and acting as structural components of cell membranes. Lipids have applications in the cosmetic and food industries as well as in nanotechnology.

Protein has many roles in your body. It helps repair and build your body's tissues, allows metabolic reactions to take place and coordinates bodily functions. In addition to providing your body with a structural framework, proteins also maintain proper pH and fluid balance.

The functions of nucleic acids have to do with the storage and expression of genetic information. Deoxyribonucleic acid (DNA) encodes the information the cell needs to make proteins. A related type of nucleic acid, called ribonucleic acid (RNA), comes in different molecular forms that participate in protein synthesis.

Answer:

Yeast is living.

Explanation:

Yeast is a type of fungus used in making bread. Fungus is a group of living organisms.

Answer:

boron aluminum gallium indium

Explanation:

hope this helps you

Answer:

4.67 atm

Explanation:

Step 1: Given data

Step 2: Convert "T" to Kelvin

We will use the following expression.

K = °C + 273.15

K = 27.0 °C + 273.15 = 300.2 K

Step 3: Calculate the moles of Ar

The molar mass of Ar is 39.94 g/mol.

4.73 g × 1 mol/39.94 g = 0.118 mol

Step 4: Calculate the partial pressure of Ar

We will use the ideal gas equation.

pAr × V = nAr × R × T

pAr = nAr × R × T / V

pAr = 0.118 mol × (0.0821 atm.L/mol.K) × 300.2 K / 2.00 L

pAr = 1.45 atm

Step 5: Determine the total pressure of the gaseous mixture

The total pressure of the gaseous mixture is equal to the sum of the partial pressures of the individual gases.

P = pAr + pHe = 1.45 atm + 3.22 atm = 4.67 atm

Answer: liver and pancreas

Explanation:the pancreas makes insulin and the liver makes liquid to break down the food

Answer:

3) pancreas and liver.........