Can someone help me out with this thanks!

I am not sure why your teacher isn't asking for the layers, but here is the list of layers;

A -(topsoil) Mostly minerals from parent material with organic matter incorporated. A good material for plants and other organisms to live.

E - (eluviated) - Leached of clay, minerals, and organic matter, leaving a concentration of sand and silt particles of quartz or other resistant materials – missing in some soils but often found in older soils and forest soils.

B - (subsoil) Rich in minerals that leached (moved down) from the A or E horizons and accumulated here.

C - (parent material) The deposit at Earth’s surface from which the soil developed.

R - (bedrock) A mass of rock such as granite, basalt, quartzite, limestone or sandstone that forms the parent material for some soils – if the bedrock is close enough to the surface to weather. This is not soil and is located under the C horizon.

Answer:

Every atom of an element will have the same number of protons

Explanation:

Protons are used to identify an element because every atom of an element will have the same number of protons.

Answer:

B. an alkene

Explanation:

pentene has 5 carbons and 10 hydrogen atoms and one double bond

Answer:

formula units

Explanation:

[tex]$KClO_3$[/tex]  is  potassium chlorate. It is an ionic compound containing potassium, chlorine and oxygen. The ion in potassium chlorate are held together by the ionic bonds in the lattice structure.

A representative particle may be defined as the smallest unit for which the substance exists in its natural form. For most of the elements, atom is the representative particle. Molecule is the representative particle for diatoms and molecular compounds. But for ionic compounds such as  [tex]$KClO_3$[/tex] , NaCl, etc. . the representative particle is its formula units.

The correct answer for this question is Decreases.

How quickly or slowly a reaction proceeds is known as the rate of reaction or speed of reaction for a reactant or product. As the reaction progresses, the rate of reaction slows because the initial concentration of the reactants is high, but as time goes on, this concentration falls, making the reaction slower. As a result, the rate of reaction is dependent on concentration and diminishes over time.

To know more about Rate of Reaction, click here:

https://brainly.com/question/13440548

#SPJ4

Answer:

Number of moles = 3.82 mol

Explanation:

Given data:

Number of moles of CO₂ = ?

Mass of CO₂ = 168.2 g

Solution:

Number of moles = mass/molar mass

Molar mass of CO₂ = 44 g/mol

By putting values,

Number of moles = 168.2 g/ 44 g/mol

Number of moles = 3.82 mol

Answer:

acids and bases cancel each other out. acids increase H+ ions while bases release H+ ions

Explanation:

Answer:

A inside the nucleus

Explanation:

All the protons (and neutrons) in an atom belong in the nucleus of an atom. Only the electrons of an atom stay in orbit.

Answer:

1.91×1021/6.023×10^23

Explanation:

need thanks and make me brainiest if it helps you

60 mL volume of 0.25M KOH was needed to neutralize 10 mL of 0.50 M H3PO4.

The balanced reaction for the reaction of KOH and H3PO4 is shown below.

3KOH + H3PO4 → K3PO4 + 3H2O

mol of H3PO4 = (0.50 M) * (10 mL) * (1 L/1000 mL) = 5x10-3 mol

The number of moles of KOH needed to neutralize H3PO4 will depend on their stoichiometric ratio.

moles KOH = mol H3PO4 * (3 mol KOH / 1 mol H3PO4)

moles KOH = 5x10-3 mol * (3 mol KOH / 1 mol H3PO4)

moles KOH = 1.5X10-2 mol

mol of KOH = (concentration KOH)(volume KOH)

volume KOH = mol KOH / concentration KOH

volume KOH = 1.5 x 10 -2 mol / 0.25 M

volume KOH = 0.06 L or 60 mL

To learn more about acid-base reactions, please refer to the link https://brainly.com/question/24807171.

#SPJ4

Answer:c

Explanation:

Answer:

I hope this helped you.

Explanation:

A: 1

B: 3

C: 3

D: 3

E: 5

F: 5

Answer:

pistil

Explanation:

Answer:

i just ad the same question and but i fon know what ther answrr ied so i cant hep you but i had he smae question on rge mdhfyqf

Explanation:

Like charges repel while the unlike charges attract.

Electrostatics has to do with the interaction that does occur between charges. We know that a charge is a specie that has an imbalance in the number of electrons that it contains. The substance is positively charged if it contains less electrons and more protons. The substance is negatively charged if it contains more electrons and less of protons.

In either case, the interaction that exist between particles could be an attractive one or a repulsive one. It is regarded as the first law of electrostatics that like charges repel while the unlike charges attract.

Hence when we look at the table, a negative charge would repel another negative charge, a positive charge would repel another positive charge but a positive or a negative charge would attract a charge of opposite sign. The interaction that is possible between the charges is given by Coulombs law.

Learn more about positive charge:https://brainly.com/question/2903220

#SPJ1

Answer:

4 ClO-

Explanation:

Bond length ∝ 1/ Bond order

Bond order of ClO − =1,

Bond order of ClO 2− =1.5,

Bond order of ClO 3− =1.66 ,

Bond order of ClO 4− =1.75.

Thus the order of bond length is

ClO 4− <ClO3− <ClO2−

<ClO −

The lipid rafts are less fluid than the surrounding membrane at normal temperatures.

Cholesterol decreases the fluidity of the membrane at normal temperatures.

Lipid rafts regulate neurotransmission, receptor traffickinging and influence membrane fluidity.

For example, in phospholipid layer in cell membrane, there are hydrophilic heads (polar part of the layer) and hydrophobic tails (nonpolar part of the layer).

1) Small, non-polar molecules diffuse easily through this layer, no energy is required, this is passive transport.

2) Polar molecules cannot diffuse through phospholipid layer using passive transport, because hydrophobic tails does not allow that (polar molecules are reppeled), energy is required for that, this is active transport.

More about cholesterol: brainly.com/question/841110

#SPJ4

A negative Gibbs free-energy value is an indication of a spontaneous reaction. This means that the reaction will occur without the need for any external energy input and will release energy that can be used to drive other processes. The correct answer is option c.

Gibbs free energy is a thermodynamic quantity that describes the amount of energy available to do work in a system. It takes into account both the enthalpy (heat) and entropy (disorder) of a system.

Therefore, a negative Gibbs free-energy value is an indication of a spontaneous reaction. Option c is the correct answer.

Learn more about Gibbs free energy here:

https://brainly.com/question/13795204

#SPJ6

Answer:

Due to cis trans isomerism

Explanation:

Answer:

129.8 grams

Explanation:

Im a bit confused of what your are asking but if your are asking the mass in grams of K (Potassium) it is very easy dont worry

You multiply mols x Molecular weight.

So

3.32x 39.1= 129.8 grams

Answer:

A 65-kg object and an 75-kg object.

Explanation:

The gravitational force is given by :

[tex]F=G\dfrac{m_1m_2}{r^2}[/tex]

F is directly proportional to the product of masses and inversely to the distance between them.

In this problem, the distance separating the objects is same for each pair. We need to find the greatest gravitational force between them.

(1) a 50-kg object and an 80-kg object

[tex]F_1=G\dfrac{4000}{r^2}\ N[/tex]

(2) a 65-kg object and an 65-kg object

[tex]F_2=G\dfrac{4225}{r^2}\ N[/tex]

(3) a 65-kg object and an 75-kg object

[tex]F_3=G\dfrac{4875}{r^2}\ N[/tex]

(4) a 60-kg object and an 70-kg object

[tex]F_4=G\dfrac{4200}{r^2}\ N[/tex]

From the above calculations we find that if the product of masses is maximum, it lead to maximum gravitational force between objects. Hence, a 65-kg object and an 75-kg object will have maximum gravitational force between them.

Answer:

Did you put that in right because i've never heard of a compound called that nor is there a compound called that on the internet

Explanation:

You must of put that in wrong

Answer: Energy is transferred from reactants to products .

Explanation: Energy is used to break bonds in reactants, and energy is released when new bonds form in products. Reactants are your starting point, and products are your result.

Answer: Silver

Explanation:

Answer:

SILVERRRRRRRRRRR

Explanation:

Answer:

There is only one stable atom that does not have neutrons. It is an isotope of the element hydrogen called protium. Protium, which contains a single proton and a single electron, is the simplest atom. All other stable atoms contain some number of neutrons. hope this helps you :)

Answer:

The answer is A

Explanation:

Pls put me as brainliest

The force helps food move through the large intestine during digestion is muscle contractions exert a pushing force on the food. Thus option A is correct.

Force is defined as a push or pull upon any object resulting from the object's interaction with another object. It is a vector quantity.

Force can also be defined as an external cause that, when applied, changes or tends to change the state of the body, if the body is in motion.

Force is expressed as

Force = mass x acceleration

There are five types of force

Digestion is define as the breakdown of food into smaller component  that can be absorbed into blood streams.

Thus, the force helps food move through the large intestine during digestion is muscle contractions exert a pushing force on the food. Thus option A is correct.

To learn more about force, refer to the link below:

https://brainly.com/question/13191643

#SPJ5

Answer:

Explanation:

To find the number of moles in a substance given it's number of entities we use the formula

[tex]n = \frac{N}{L} \\[/tex]

where n is the number of moles

N is the number of entities

L is the Avogadro's constant which is

6.02 × 10²³ entities

From the question we have

[tex]n = \frac{7.1 \times {10}^{25} }{6.02 \times {10}^{23} } \\ = 117.940199...[/tex]

We have the final answer as

Hope this helps you

The old age of rock when examined is 21.4 million years if the ratio of uranium-235 to lead-207 is found to be 125,000:875,000. the half-life of uranium-235 is 700 million years.

P = [P + D] (1/2) ^(t/t(1/2))

where,

P represent the present parent amount

D is the present daughter amount

t(1/2) is the half life time period

t is the actual age

We know that,

t = (log[(P+D) /P] / log2) × t(1/2) ----------(1)

Given,

P = 97.6

D = 2.1

Ratio of P and D can be calculated as

P/D = 97.6/2.1

= 46.476

By substituting all the values in eq(1), we get

t = [(log 46.476 +1)/log2] × t(1/2)

Given,

The half life of U —Pb decay is 700 million years.

So,

t = [(log 46.476 +1)/log2] × 700

t = 21.4 million years.

Thus, we calculated that the the old age of rock when examined is 21.4 million years.

learn more about Half life period:

https://brainly.com/question/20309144

#SPJ4

DISCLAIMER:

The given question is misprint on portal.

Here is the correct form of question:

A rock is examined to determine its age, and the ratio of uranium-235 to lead-207 is found to be 125,000:875,000. the half-life of uranium-235 is 700 million years.

How old is the rock if it contains Uranium-235/ lead-207 ratio of 97.6 to 2.1?