Can I get help??? again

it's timed #TheStruggleIsReal

The density of an object is .835 g/cm3. If its volume is 34 cm3, what is the mass of the object?


A. 0.02 g

B. 0.41 g

C. 28.39 g

D. 40.72 g

The truck exerts more force on the mosquito than the mosquito exerts on the truck is true during the collision.

What is the exerts?
Exerts is a term used to describe a passage or an extract taken from a larger piece of writing. Exerts are often used to showcase a specific part of a work and can be used to highlight the most important or influential passages. Exerts can be used to support or illustrate an argument, and can be used to provide evidence for a point that is being made. Exerts are often found in essays, scholarly articles, and other forms of writing, and are a useful tool for authors to draw attention to certain points or ideas.

To learn more about exerts

https://brainly.com/question/17140804

#SPJ4

The similarities and differences between static stretching and dynamic stretching are the dynamic stretch is a style of stretching that is more strenuous and physically stimulating, while the static stretch is a form of stretching that is slower and more relaxing.

Another difference between static and dynamic stretching is that after a dynamic stretch, you may feel stronger and have more muscle endurance and speed, whereas static stretching before an exercise diminishes these same qualities; To get the most out of your workout, perform dynamic stretching before you begin, and static stretching afterward. Static and dynamic stretching have similar benefits in lowering the risk of injury by increasing flexibility, balance, and body awareness.

To learn more about dynamic and statistic stretch click here:

https://brainly.com/question/14635799

#SPJ4

Answer:

222m/s

Explanation:

The speed of a wave is calculated using the forumula:

v = fλ

Lets substitute in our values:

v = 37 × 6

Which is equal to

v = 222m/s

Graphite: according to table 1, which of the following materials is the poorest electrical conductor.

What is conductor?

Conductor is an electrical device or material that is capable of allowing electric current to flow through it. It is used in a variety of applications ranging from wiring in buildings to the transmission of electricity over large distances.

Conductors are typically made from metals, such as copper and aluminum, but certain types of materials, such as semiconductors, can also act as conductors.

To learn about more What is conductor.

https://brainly.com/question/24154868

#SPJ4

Answer:

f = 2 Hz

Explanation:

The frequency of a wave is defined as the no. of waves passing per unit of time. Therefore, the frequency of a wave can be calculated by the following formula:

[tex]f = \frac{n}{t}[/tex]

where,

f = frequency of the wave = ?

t = time passed = 1 s

n = no. of waves passing in time t = 2

Therefore,

[tex]f = \frac{2}{1\ s}[/tex]

f = 2 Hz

Dynamic stretching is recommended before activity because it helps to prepare the muscles for the upcoming activity.

It increases range of motion, flexibility, and muscular coordination, and also helps to increase blood flow to the muscles. This helps to improve the performance of the muscles and reduce the risk of injury. Additionally, dynamic stretching helps to improve the overall physical conditioning of an individual, which is beneficial for any type of physical activity.

Dynamic stretching is typically recommended for individuals preparing for physical activity. Dynamic stretching involves movements that gradually increase in range of motion and muscle length, such as arm swings, leg swings, and torso twists.

Learn more about dynamic stretching:

https://brainly.com/question/860156

#SPJ4

The given statement is false. Due of their athleticism and muscular bodies, exceptional athletes like LeBron James or Michael Jordan transcend the laws of physics.

Laws of Physics are by their very nature statements of facts that have been inferred and developed from empirical data. Simply said, physical laws are a technique of categorizing how the world behaves when it comes to "functioning."

When an object interacts with another object, it experiences a push or pull known as a force. Every time two objects come into contact, a force is applied to each one of them.  Actual forces can only be created by interaction.

Learn more about law of physics from the given link.

https://brainly.com/question/24468880

#SPJ4

Animals eat seeds, then those seeds are spread by animals.

To know more on interdependence here

https://brainly.com/question/3095398

#SPJ2

The ball's initial speed as it descended straight down from a height was 17.5 miles per hour.

The starting velocity is the speed at time t = 0. (u). It is the speed at which motion first becomes apparent. Four equations can be used to calculate initial velocity: (1) If time, acceleration, and end velocity are known, the initial velocity can be calculated using the formula u = v - at.

v² - u² = 2 × a × s

here, v = final velocity = 7.5 m/s

a = 9.81 m/s^2

s = 2.0 m

Solving for u (initial velocity) we get:

(7.5)² - u² = 2 × 9.8 × 2

56.25 - u² = 39.2

u² = 56.25 - 39.2

u² = 17.05

To know more about velocity visit:-

https://brainly.com/question/18084516

#SPJ4

The electroscope must have received a total charge of 2.45 x q if the wires are each at a 26° angle with the vertical.

An electroscope is a scientific tool which is used to find the existence of an electric charge on a body. The first electroscope with a pivoting needle, known as a versorium, was created by British physician William Gilbert in the year 1600.

An electroscope is a piece of equipment used in science to determine whether and how much electric charge is present on a body. There are three traditional electroscope types: the needle electroscope, the gold-leaf electroscope, and the pith-ball electroscope (third). For each of them, we have simulators available.

Equilibrium condition = mgsin∅ = 2.45 x [tex]10^{-6}[/tex]

To learn more about electroscope visit:
brainly.com/question/29073064

#SPJ4

Said Aouita's average speed for the race was 12.089 m/s. To calculate this, we need to divide the total distance (3000 meters) by the total time (7 minutes and 29.45 seconds).

Converting the time to seconds, we get 449.45 seconds.

Therefore,

3000 / 449.45 = 12.089 m/s.

This is an impressive speed for a 3000 m race and it was a new world record at the time. Aouita was the first runner to break the eight minute barrier in the 3000 m, a feat he accomplished in 1987. His world record lasted for almost 3 years until it was broken by Moses Kiptanui in 1992. Aouita's world record is a testament to his incredible speed and endurance.

Learn more about speed:

https://brainly.com/question/26046491

#SPJ4

A force on the free-body diagram above which represents the normal force acting on the car include the following: D. Force A.

In Science, a free-body diagram can be defined as a graphical illustration which is typically used in the field of science to visualize moments, tension, and applied forces that are acting on an isolated or rigid object (body), while using arrows to point in the direction of these forces.

Since this car was driven to the right, with a large amount of air resistance acting on it, and its engine provides the forward motion, we can reasonably infer and logically deduce that the normal force which is acting on the car is represented by Force A as illustrated by the free-body diagram shown in the image attached above.

Read more on free-body diagram here: https://brainly.com/question/18770265

#SPJ1

Explanation:

The moon orbits the Earth once every 27.322 days. It also takes approximately 27 days for the moon to rotate once on its axis. As a result, the moon does not seem to be spinning but appears to observers from Earth to be keeping almost perfectly still. Scientists call this synchronous rotation

Answer:

Greater

Explanation:

Distance (height) and mass determine the amount of Potential energy in an object.

Answer:

The length of the load arm is 3 m

The length of the effort arm is 15 m

Spoons and scissors are class 1 levers

Explanation:

The data given in the force diagram of the lever (machine) are;

The length of the lever = 18 m = (Length of effort arm) + (Length of load arm)

The force applied at the effort = 100 N

The load lifted by the lever = 500 N

The mechanical advantage, MA is given as follows;

MA = Load/Effort = (Length of effort arm)/(Length of load arm)

∴ MA = 500 N/(100 N) = 5

Let 'x' represent the length of the effort arm, and let 'y', represent the length of the load arm, we have;

x + y = 18...(1) (given)

MA = 5 = x/y

∴ x = 5·y...(2)

Substituting the value of 'x' in equation (1) with x = 5·y gives;

x + y = 5·y + y = 6·y = 18

∴ y = 18/6 = 3

y = 3

The length of the load arm, y = 3 m

x = 5·y = 5 × 3 = 15

x = 15

The length of the effort arm, x = 15 m

When lifting food with a spoon, the fulcrum, which can be taken as the edge of the plate or the supporting finger, is in between bowl of the spoon and the point of application of the thumb towards the extremities of the spoon handle

Therefore a spoon is a class 1 lever

The pivot of a scissors is in between the item being cut (the load) and the holes where the finger applies an effort

Therefore, a scissors is a class 1 lever.

Answer:

A gravitational force exerted by an object on another is a force.

Explanation:

hope it helps

The study of computers and computing, encompassing the theoretical and algorithmic underpinnings, hardware and software, and applications for information processing, is known as computer science.

The study of algorithms and data structures, computer and network design, the modelling of data and information processes, and artificial intelligence are all included in the field of computer science. Since mathematics and engineering provide some of the underpinnings for computer science, it integrates concepts from those fields as well as queueing theory, probability and statistics, and electrical circuit design. As new algorithms, information structures, and computer architectures are conceptualised, designed, measured, and improved in computer science, extensive use of hypothesis testing and experimentation is also used.

Computer science is regarded as one of five distinct but related fields, including computer engineering, information systems,  information technology, and software engineering. This family has come to be known collectively as the discipline of computing.

To learn more about computer science visit:

brainly.com/question/20837448

#SPJ4

The mass of copper that is left unreacted at the end of the chemical reaction is 1.90 g

The mass of copper that is left untreated at the end of the chemical reaction is determined as follows:

Mass of copper before the reaction = 3.55 g

Mass of iodine before the reaction = 4.60 g

Mass of product = 6.25 g

According to the law of conservation of mass;

Mass of reactant = mass of product + mass of unreacted copper

Mass of reactants = 3.55 + 4.60

Mass of reactants = 8.15 g

The difference in the mass of the product obtained and the mass of the unreacted copper

Mass of unreacted copper = 8.15 g - 6.25 g

Mass of unreacted copper = 1.90 g

Learn more about the law of conservation of mass at: https://brainly.com/question/1992248

#SPJ1

Radioactive element  which keeps on decaying over the time. Decay of radioactive element always comes under first order kinetics. Therefore the half life time of  radioactive substance is 2seconds.

Half life tells about the time at which the radioactive material decays to half of its initial concentration.

Mathematically,

half life time=0.693/  rate constant of the decay

The half life of a radioactive substance is the time taken for the activity to halve. Using the graph to calculate the half life of the radioactive isotope, we find that activity that is 3500 so, half of this activity is 17500 which is corresponding to time 2 seconds.

Therefore the half life time of  radioactive substance is 2seconds.

To know more about half life, here:

brainly.com/question/21464063

#SPJ1

The impulse applied to the soccer ball by the soccer player is the combined force and time of the kick applied to the ball.

What do you mean by Impulse?

Impulse is an instantaneous force applied to an object, resulting in a change in the object's momentum. It is a vector quantity, which means that it has both magnitude and direction. Impulse is the product of a force applied to an object for a certain period of time. It is calculated as the product of the average force applied multiplied by the time period over which the force is applied. For example, when a ball is hit with a bat, the force of the bat is applied to the ball for a certain amount of time, resulting in an impulse which causes the ball to move.

1. Calculate the change in momentum of the soccer ball:

Change in momentum = Final Momentum - Initial Momentum

                                      = 7 kg m/s - 5 kg m/s

                                      = 2 kg m/s

2. Calculate the impulse:

Impulse = Change in Momentum

             = 2 kg m/s

Therefore, the impulse applied by the soccer player to the soccer ball is 2 kg m/s.

To know more about impulse,

https://brainly.com/question/29787329

#SPJ4

Answer:

Explanation:

This is one-dimensional motion on an incline, which is always tons of fun :/

The equation you need for this is

w*sinθ - f = ma where w is the weight of the girl (NOT the mass), theta is the angle of inclination, f is the frictional force pulling back on the girl, m is the mass of the girl, and a is the acceleration she experiences under these conditions. We have the mass but we need the weight, and weight has its own equation:

[tex]F_n=w=mg[/tex] where Fn is the normal force of the girl (which is the same as weight). Her normal force/weight is

w = 45(9.8) and we need 2 sig fig's for the answer so her weight is

w = 440N

f = μ[tex]F_n[/tex] which is the coefficient of kinetic friction times the normal force/weight of the girl:

f = (.25)(440) and we need 2 sig fig's for this as well so the frictional force is

f = 110

Putting it all together in the main equation looks like this:

440sin45 - 110 = 45a

Multiplication/division rules for sig fig's are different so we have to do them individually.

440sin45 will have 2 sig fig's in the answer:

440sin45 = 310; therefore:

310 - 110 = 45a. Again, because we have subtraction on the left and we will divide eventually, and the rules for both are different, we will subtract first, get that answer in the correct number of sig fig's and then divide that result by 45:

2.0 × 10² = 45a so

a = 4.4 m/s/s

Sometimes in phase and sometimes out of phase.The voltage across the resistor and generator will depend on the phase difference between the current and voltage in the circuit.

The voltage across the resistor and generator will depend on the phase difference between the current and voltage in the circuit. If the phase difference is 0°, then the voltage across the resistor and generator will be in phase. If the phase difference is 180°, then the voltage across the resistor and generator will be out of phase. In any other scenario, the voltage across the resistor and generator will be somewhere in between in phase and out of phase.

Sometimes in phase and sometimes out of phase.

learn more about current here

https://brainly.com/question/17120024

#SPJ4

Answer:

Greenhouse gases have far-ranging environmental and health effects. They cause climate change by trapping heat, and they also contribute to respiratory disease from smog and air pollution. Extreme weather, food supply disruptions, and increased wildfires are other effects of climate change caused by greenhouse gases.

Explanation:

:) YW

Answer:

according to scientists greenhouse gasses, include co2 which can heat up the climate. cars and factorys creat co2 admission which cause global warming

Answer:

The object's mass is 41.1125 kilograms.

Explanation:

We can use the general density equation to determine the mass.

Density Equation

[tex]p=\frac{m}{V}[/tex]

[tex]p[/tex] is the density

[tex]m[/tex] is the mass

[tex]V[/tex] is the volume

Lets solve for [tex]V[/tex].

Multiply both sides of the equation by [tex]V[/tex].

[tex]p*V=\frac{m}{V}*V[/tex]

Cancel out the common factor of [tex]V[/tex] on the right side.

[tex]pV=m\\m=pV[/tex]

Now we have an equation for mass.

We are given

[tex]p=3.25[/tex]

[tex]V=12.65[/tex]

Substituting our values into our equation gives us

[tex]m=3.25*12.65\\m=41.1125[/tex]

Notice the unit of the given density

[tex]kg/m[/tex]

Our answer will be in kilograms

As a result, the net pressures on the automobile and truck are zero.

what is pressure ?

If you tried to smash a bowling pin into the wall, nothing would happen except that people would stop lending you bowling pins. If you used the same force to hammer a nail, the nail would be far more likely to pierce the wall. This demonstrates that knowing the quantity of the force isn't always enough: you also need to know how that force is distributed over the impact surface. The nail condensed all of the power between the wall and the nail into a relatively tiny region on the pointed tip of the nail. However, because the area of the bowling pin that touched the wall was significantly bigger, the force was much less focused.

Newton's Second Law states that the net Force acting on an object is given by

MA Fnet = MA

The acceleration is given by the ratio of the change in velocity of an object and the time it takes to change velocity.

(Vf - Vi)/T = a

If the vehicles are driving at constant speeds, their velocity change is zero (0).

If the velocity change is zero, the acceleration is also zero (0).

As a result, Fnet = M(0) = 0.

As a result, the net pressures on the automobile and truck are zero.

To learn more about pressures follow the given link: brainly.com/question/2704868

#SPJ4

Answer:

Hello There!!

Explanation:

The answer is b. solenoid.