calculate the vertical reaction
5. Calculate the Vertical reaction of support A. Take E as 10 kN, G as 2 kN, H as 3 kN. also take Kas 12 m, Las 4 m, N as 11 m. 5 MARKS HkN H H KN EkN T G Km F G KN Lm E A B c D Nm Nm Nm Nm

The molecular formula of the compound is C₈H₁₀N₄O₂. The correct answer is option b.

To determine the molecular formula of the compound, we need to find the empirical formula first. The empirical formula represents the simplest whole-number ratio of atoms in a compound.

Calculate the number of moles of each element:

Carbon (C): 49.48% of 194.19 g = 96.09 g

Moles of C = 96.09 g / 12.01 g/mol = 7.999 mol (approximately 8 mol)

Hydrogen (H): 5.19% of 194.19 g = 10.08 g

Moles of H = 10.08 g / 1.01 g/mol = 9.981 mol (approximately 10 mol)

Nitrogen (N): 28.85% of 194.19 g = 56.02 g

Moles of N = 56.02 g / 14.01 g/mol = 3.998 mol (approximately 4 mol)

Oxygen (O): 16.48% of 194.19 g = 32.02 g

Moles of O = 32.02 g / 16.00 g/mol = 2.001 mol (approximately 2 mol)

Find the simplest whole-number ratio:

Divide the number of moles of each element by the smallest number of moles (in this case, 2 mol) to obtain the simplest whole-number ratio:

C: 8 mol / 2 mol = 4

H: 10 mol / 2 mol = 5

N: 4 mol / 2 mol = 2

O: 2 mol / 2 mol = 1

The empirical formula is C₄H₅N₂O

To determine the molecular formula, we need to compare the empirical formula's molar mass to the given molecular weight (194.19 g/mol).

Empirical formula mass: C₄H₅N₂O = 4(12.01 g/mol) + 5(1.01 g/mol) + 2(14.01 g/mol) + 16.00 g/mol = 98.10 g/mol

To find the molecular formula, we divide the molecular weight by the empirical formula mass:

Molecular weight / Empirical formula mass = 194.19 g/mol / 98.10 g/mol = 1.98 (approximately 2)

Multiply the subscripts in the empirical formula by 2 to obtain the molecular formula:

C₄H₅N₂O * 2 = C₈H₁₀N₄O₂

Therefore, the molecular formula of the compound is C₈H₁₀N₄O₂ (option b).

Learn more about molecular formula at https://brainly.com/question/30813885

#SPJ11

The weight of the column is approximately 6,000 N and the mass of the column is approximately 611 kg.

Given: Diameter of solid steel column (D) = 0.2 m

Height of solid steel column (h) = 2500 mm

Density of steel (p) = 7.8 x [tex]10^3[/tex] kg/m³

We have to calculate the mass and weight of the column.

We will use the formula for mass and weight for this purpose.

Mass of column = Density of steel x Volume of column

Volume of column = (π/4) x D² x h

=> (π/4) x (0.2)² x 2500 x [tex]10^{-3[/tex]

= 0.07854 m³

Therefore, the mass of the column = Density of steel x Volume of column

=> 7.8 x [tex]10^3[/tex] x 0.07854

=> 611.652 kg

≈ 611 kg (approx.)

Weight of the column = Mass of the column x acceleration due to gravity

=> 611.652 x 9.81

=> 6,000.18912

N ≈ 6,000 N (approx.)

Therefore, the weight of the column is approximately 6,000 N and the mass of the column is approximately 611 kg.

To know more about weight visit:

https://brainly.com/question/31888728

#SPJ11

The interpolating polynomial of degree 4 using divided difference for the given data is:

$p(x) = -6 + 43x - 31x(x-1) + 44.55x(x-1)(x-1.5) + 6.5x(x-1)(x-1.5)(x-2.4)$

To construct the interpolating polynomial of degree 4 using divided difference, we can utilize Newton's divided difference formula. The formula is based on the concept of divided differences, which are the differences between function values at different data points.

The divided difference table for the given data is as follows:

[tex]\[\begin{align*}x_i & \quad f[x_i] \\0 & \quad -6 \\1 & \quad 1.1 \\1.5 & \quad 15 \\2.4 & \quad 109.06 \\3 & \quad 274.5 \\\end{align*}\][/tex]

To find the divided differences, we can use the following notation:

[tex]\[f[x_i, x_{i+1}] = \frac{f[x_{i+1}] - f[x_i]}{x_{i+1} - x_i}\][/tex]

Applying the divided difference formula, we get:

[tex]\[f[x_0, x_1] = \frac{1.1 - (-6)}{1 - 0} = 7.1\]\[f[x_1, x_2] = \frac{15 - 1.1}{1.5 - 1} = 8.33\dot{3}\][/tex]

[tex]\[f[x_2, x_3] = \frac{109.06 - 15}{2.4 - 1.5} = 73.68\dot{6}\][/tex]

[tex]\[f[x_3, x_4] = \frac{274.5 - 109.06}{3 - 2.4} = 340.88\dot{8}\][/tex]

Next, we calculate the second-order divided differences:

[tex]\[f[x_0, x_1, x_2] = \frac{8.33\dot{3} - 7.1}{1.5 - 0} = 0.715\][/tex]

[tex]\[f[x_1, x_2, x_3] = \frac{73.68\dot{6} - 8.33\dot{3}}{2.4 - 1} = 24.4\][/tex]

[tex]\[f[x_2, x_3, x_4] = \frac{340.88\dot{8} - 73.68\dot{6}}{3 - 1.5} = 252.8\][/tex]

Finally, we calculate the third-order divided difference:

[tex]\[f[x_0, x_1, x_2, x_3] = \frac{24.4 - 0.715}{2.4 - 0} = 10[/tex]

Now, we can write the interpolating polynomial as:

[tex]\[p(x) = f[x_0] + f[x_0, x_1](x - x_0) + f[x_0, x_1, x_2](x - x_0)(x - x_1) + f[x_0, x_1, x_2, x_3](x - x_0)(x - x_1)(x - x_2)\][/tex]

Substituting the calculated values, we get the final interpolating polynomial:

[tex]\[p(x) = -6 + 43x - 31x(x-1) + 44.55x(x-1)(x-1.5) + 6.5x(x-1)(x-1.5)(x-2.4)\][/tex]

Learn more about Interpolating polynomials

brainly.com/question/26460790

#SPJ11

The addition of CNBr will result in (put down a number) peptide fragment(s).The addition of CNBr, a cleavage agent, will result in two peptide fragments.The B-turn structure is likely found at (Write down the residue number).

There are different approaches to determine the residue number of a B-turn structure. There is no direct method of identifying them based on the sequence alone. A possible disulfide bond is formed between the residue numbers C5 and C22. Cysteine can create a disulfide bond.

These are strong bonds that can influence the protein's conformation and stability.The total number of basic residues is six. Basic residues have a positive charge and include histidine (H), lysine (K), and arginine (R). These residues interact with acidic residues like glutamate (E) and aspartate (D).

The addition of trypsin will result in four peptide fragments. Trypsin is a protease that cleaves peptide bonds at the carboxyl-terminal side of lysine and arginine residues. The peptide bonds involving lysine and arginine are broken down by this enzyme.

The addition of chymotrypsin will result in two peptide fragments. Chymotrypsin is a protease that cleaves peptide bonds on the carboxyl-terminal side of hydrophobic residues such as tryptophan, tyrosine, phenylalanine, and leucine. The peptide bonds involving these residues are broken down by this enzyme.

Thus, the addition of CNBr will result in two peptide fragments. The B-turn structure is likely found at residue number 7. A possible disulfide bond is formed between the residue numbers 5 and 22.

The total number of basic residues is six. The addition of trypsin will result in four peptide fragments, and the addition of chymotrypsin will result in two peptide fragments.

To know more about  histidine visit :

brainly.com/question/31674436

#SPJ11

Comparing the weight of the cylinder (1960 dynes) with the buoyant force (9.1912 dynes), we can see that the weight of the cylinder is significantly greater than the buoyant force exerted by the water. The cylinder will sink in the pool of water rather than float.

To determine whether the cylinder can float in the pool of water, we need to compare the weight of the cylinder with the buoyant force exerted by the water.

The weight of the cylinder can be calculated using the formula: weight = mass × acceleration due to gravity. The weight of the cylinder is given as 19.6 N, which is equivalent to 1960 dynes.

The buoyant force exerted by the water can be calculated using the formula: buoyant force = weight density × volume of the displaced water. The volume of the displaced water can be calculated as the volume of the cylinder, which is πr²h, where r is the radius of the cylinder and h is its height.

Given that the diameter of the cylinder is 20 cm, the radius is 10 cm (0.1 m). The height of the cylinder is 30 cm (0.3 m).

Using these values, the volume of the displaced water is calculated as follows:

Volume = π × (0.1 m)² × 0.3 m

≈ 0.00942 m³

Now, let's calculate the buoyant force:

Buoyant force = 980 dynes/cm³ × 0.00942 m³

≈ 9.1912 dynes

Comparing the weight of the cylinder (1960 dynes) with the buoyant force (9.1912 dynes), we can see that the weight of the cylinder is significantly greater than the buoyant force exerted by the water. Therefore, the cylinder will sink in the pool of water rather than float.

Learn more about weight

https://brainly.com/question/86444

#SPJ11

The partial fraction decomposition of (9x - 4) / (x^2 + 6)^2 is A / (x^2 + 6) + B / (x^2 + 6)^2, and the indefinite integral of (2x^2 - 4x^2 - 47x + 19) / (x^2 - 2x - 24) is A ln|x - 6| + B ln|x + 4| + C.

To find the partial fraction decomposition of the rational expression (9x - 4) / (x^2 + 6)^2, we need to decompose it into simpler fractions.

The denominator, (x^2 + 6)^2, is already factored, so we can write the partial fraction decomposition as:

(9x - 4) / (x^2 + 6)^2 = A / (x^2 + 6) + B / (x^2 + 6)^2

Here, A and B are constants that we need to determine.

Now, to find the values of A and B, we can multiply both sides of the equation by the common denominator (x^2 + 6)^2:

(9x - 4) = A(x^2 + 6) + B

Expanding the right side:

9x - 4 = Ax^2 + 6A + B

By comparing the coefficients of like terms on both sides, we can set up a system of equations to solve for A and B.

For the x^2 term:

0A = 0 (Since the coefficient of x^2 on the left side is 0)

For the x term:

0 = 9 (Coefficient of x on the left side)

For the constant term:

-4 = 6A + B

Solving the system of equations will give us the values of A and B, which will complete the partial fraction decomposition.

Now, for the indefinite integral:

∫ (2x^2 - 4x^2 - 47x + 19) / (x^2 - 2x - 24) dx

We first need to factor the denominator:

x^2 - 2x - 24 = (x - 6)(x + 4)

We can then use the partial fraction decomposition to simplify the integrand. After finding the values of A and B from the previous step, we can rewrite the integrand as:

(2x^2 - 4x^2 - 47x + 19) / (x^2 - 2x - 24) = A / (x - 6) + B / (x + 4)

Now, we can integrate each term separately:

∫ A / (x - 6) dx + ∫ B / (x + 4) dx

The integrals of these terms can be evaluated using natural logarithm and arctangent functions, but since the problem asks for the indefinite integral, we can leave the integration as it is:

A ln|x - 6| + B ln|x + 4| + C

Here, C represents the constant of integration.

Remember to take absolute values in the natural logarithm terms to account for both positive and negative values of x.

So, the partial fraction decomposition of the given rational expression is A / (x - 6) + B / (x + 4), and the indefinite integral of the expression (2x^2 - 4x^2 - 47x + 19) / (x^2 - 2x - 24) is A ln|x - 6| + B ln|x + 4| + C.

To learn more about fractions click here

brainly.com/question/10354322

#SPJ11

This is possible only when [tex]x = π/6 + 2nπ or x = 5π/6 + 2n[/tex]π.

Substituting sin(x) = -1/3 in the equation, we get sin(x) = -1/3.

This is not possible over the domain 0 ≤ x ≤ 2π.

The given equation is 2sin²(x) - sin(x) - 1 = 0. This is a quadratic equation in sin(x).Let sin(x) = p, then the given equation becomes 2p² - p - 1 = 0.

Using the quadratic formula, we can find the value of p.p =[tex][1 ± √(1 + 8)]/4 = [1 ± 3]/4. Thus, p = 1 or p = -1/[/tex]2.Substituting sin(x) = 1 in the equation, we get sin(x) = 1. This is possible only when x = nπ + (-1)ⁿ⁺¹π/2, where n is an integer.

Substituting sin(x) = -1/2 in the equation, we get sin(x) = -1/2.

This is possible only when[tex]x = 7π/6 + 2nπ or x = 11π/6 + 2[/tex]nπ.

Therefore, the solutions of the equation 2sin²(x) - sin(x) - 1 = 0 over the domain [tex]0 ≤ x ≤ 2π are x = π/2 + 2nπ, 7π/6 + 2nπ, 11π/6 + 2nπ[/tex] where n is an integer.

b)The given equation is 6sin²(x) - sin(x) - 1 = 0. This is a quadratic equation in sin(x).Let sin(x) = p, then the given equation becomes 6p² - p - 1 = 0. Using the quadratic formula, we can find the value of p.p = [1 ± √(1 + 24)]/12 = [1 ± 5]/12.

Thus, p = 1/2 or p = -1/3.

Substituting sin(x) = 1/2 in the equation, we get sin(x) = 1/2.

To know more about quadratic visit:

https://brainly.com/question/22364785

#SPJ11

Let's start the problem by writing down the given values;Gauge pressure, P = 30 kN/m²Velocity, V = 10 m/sDensity of water, ρ = 1000 kg/m³Height of pipeline above datum, h = 600 cm = 6 mAcceleration due to gravity, g = 9.81 m/s².

Using Bernoulli's equation, the total energy per unit weight of the water is given by the formula below:`total energy per unit weight of water = (P/ρg) + (V²/2g) + (h)`where P is gauge pressure, ρ is density, g is acceleration due to gravity, V is velocity, and h is the height of pipeline above datum level.

Substituting the given values in the above formula, we get:`total energy per unit weight of water = (30 × 10⁴/(1000 × 9.81)) + (10²/(2 × 9.81)) + 6 = 304.99 m`.

Therefore, the total energy per unit weight of water at this point is approximately 305 m.

Water flow and pressure are critical factors that affect pipeline efficiency. Engineers must consider various aspects of the pipeline system, including the flow of water, pressure, and height above sea level, to design an effective pipeline system that meets their requirements.

This problem involves determining the total energy per unit weight of water flowing in a pipeline 600 cm above datum level with a velocity of 10 m/s and a gauge pressure of 30 KN/m².

We used Bernoulli's equation to calculate the total energy per unit weight of water, which is given by the formula below:`total energy per unit weight of water = (P/ρg) + (V²/2g) + (h)`where P is gauge pressure, ρ is density, g is acceleration due to gravity, V is velocity, and h is the height of pipeline above datum level.

We substituted the given values into the above formula and obtained a total energy per unit weight of approximately 305 m. Therefore, the total energy per unit weight of water at this point is approximately 305 m.

Water pipelines are an essential part of the water supply infrastructure. Designing an efficient pipeline system requires knowledge of various factors such as water flow, pressure, and height above sea level.

Bernoulli's equation is a crucial tool in pipeline design as it helps to determine the total energy per unit weight of water flowing in the pipeline. This problem shows that the total energy per unit weight of water flowing in a pipeline 600 cm above datum level with a velocity of 10 m/s and a gauge pressure of 30 KN/m² is approximately 305 m.

To know more about Bernoulli's equation :

brainly.com/question/6047214

#SPJ11

Answer:

19

Step-by-step explanation:

Because 20-1=19

Answer:

#4 1) -12<4

#5 3) 86.49 & 94

#6 4) 6

#7 2) 12(5 + 1)

Step-by-step explanation:

#4 choice 3 & 4 could not be the answers, because the value is not list.

#5

[tex]2[3(4^{2}+1) ]-2^{3}= 2[3(16+1) ]-2^{3} =2[3(17) ]-2^{3} =2(51)-2^{3}=2(51)-8=102-8=94[/tex]

#6

  [tex]15\frac{3}{4}/(2\frac{5}{8})[/tex]

[tex]=[\frac{60}{4}+\frac{3}{4}]/(2\frac{5}{8} )[/tex]

[tex]=\frac{63}{4}/[\frac{16}{8}+\frac{5}{8} ][/tex]

[tex]=\frac{63}{4}/\frac{21}{8}[/tex]

[tex]= \frac{63}{4}*\frac{8}{21}[/tex]

= 6

 the vapor pressure of chloroform in the solution is approximately 61.11 torr.

To calculate the vapor pressure of chloroform in the solution, we can use Raoult's law, which states that the vapor pressure of a component in a solution is proportional to its mole fraction in the solution.

First, let's calculate the mole fraction of chloroform (CHCl3) and acetone (CH3COCH3) in the solution.

Mole fraction of chloroform (X_CHCl3) = moles of chloroform / total moles of the solution

Moles of chloroform (n_CHCl3) = mass of chloroform / molar mass of chloroform

Molar mass of chloroform (CHCl3) = 1 * (12.01 g/mol) + 1 * (1.01 g/mol) + 3 * (35.45 g/mol) = 119.37 g/mol

Moles of chloroform (n_CHCl3) = 4.82 g / 119.37 g/mol = 0.0404 mol

Moles of acetone (n_CH3COCH3) = 9.01 g / (58.08 g/mol) = 0.155 mol

Total moles of the solution = moles of chloroform + moles of acetone = 0.0404 mol + 0.155 mol = 0.1954 mol

Mole fraction of chloroform (X_CHCl3) = 0.0404 mol / 0.1954 mol = 0.2073

Now, we can use Raoult's law to calculate the vapor pressure of chloroform in the solution:

Vapor pressure of chloroform (P_CHCl3_solution) = X_CHCl3 * P_CHCl3

where P_CHCl3 is the vapor pressure of pure chloroform.

P_CHCl3_solution = 0.2073 * 295 torr = 61.11 torr

Therefore, the vapor pressure of chloroform in the solution is approximately 61.11 torr.

To learn more about Raoult's law:

https://brainly.com/question/10165688

#SPJ11

The company's balance sheet as of December 31, 2021, shows total assets of RM300,000, total liabilities of RM80,000, and total equity of RM220,000.

Based on the information provided, here is the balance sheet as of December 31, 2021:

Balance Sheet

As of December 31, 2021

(in RM)

Assets:

Cash: 30,000

Inventory: 15,000

Property, Plant, and Equipment: 250,000

Accounts Receivable: 5,000

Total Assets: 300,000

Liabilities:

Accounts Payable: 30,000

Notes Payable: 50,000

Total Liabilities: 80,000

Equity:

Common Stock: 120,000

Retained Earnings: 100,000

Total Equity: 220,000

Total Liabilities and Equity: 300,000

To know more about balance sheet, refer here:

https://brainly.com/question/28446946

#SPJ4

The first trigonometric function in terms of the second for θ in the given quadrant. csc(θ),cot(θ);θ in Quadrant II is cot(θ).

Given, Quadrant IIIn Quadrant II, the values of sin(θ) and cos(θ) are positive while tan(θ) and cot(θ) are negative.csc(θ) = 1/sin(θ)This implies that csc(θ) is positive in Quadrant II as sin(θ) is positive.

Therefore, csc(θ) is positive in Quadrant II. Now, we need to find the cot(θ) function in terms of csc(θ).cot(θ) = cos(θ)/sin(θ).

Multiplying the numerator and denominator of the above fraction with csc(θ), we have:

cot(θ) = (cos(θ) × csc(θ)) / (sin(θ) × csc(θ))

cos(θ) / sin(θ) × 1/csc(θ)= cos(θ) × csc(θ) / sin(θ) × csc(θ)

csc(θ) × cos(θ) / sin(θ),

Now, cos(θ) / sin(θ) = - tan(θ).

Therefore, we can say:cot(θ) = csc(θ) × (- tan(θ)).

Therefore, the  answer to the given question is the first trigonometric function in terms of the second for θ in the given quadrant. csc(θ),cot(θ);θ in Quadrant II is cot(θ).

We can say that cot(θ) is the first trigonometric function in terms of the second for θ in Quadrant II when csc(θ) and cot(θ) are given.

To understand this, we need to understand the values of different trigonometric functions in Quadrant II. In Quadrant II, the values of sin(θ) and cos(θ) are positive while tan(θ) and cot(θ) are negative.

So, we can say that csc(θ) is positive in Quadrant II as sin(θ) is positive.

To find the cot(θ) function in terms of csc(θ), we use the formula cot(θ) = cos(θ)/sin(θ). We then multiply the numerator and denominator of the above fraction with csc(θ) to get the value of cot(θ) in terms of csc(θ).

We simplify the obtained expression and use the value of cos(θ)/sin(θ) = - tan(θ) to get cot(θ) in terms of csc(θ) and tan(θ).

Therefore, the first trigonometric function in terms of the second for θ in Quadrant II when csc(θ) and cot(θ) are given is cot(θ).

The first trigonometric function in terms of the second for θ in Quadrant II when csc(θ) and cot(θ) are given is cot(θ).

To know more about trigonometric function visit:

brainly.com/question/25618616

#SPJ11

Approximately 83.3 mL of 0.250 M H2SO4 solution is required to react completely with 25 mL of 1.50 M NaOH solution.

To determine the volume of the H2SO4 solution needed to react completely with the NaOH solution, we can use the balanced equation: 2NaOH + H2SO4 -> Na2SO4 + 2H2O.

First, we need to determine the number of moles of NaOH in the 25 mL of 1.50 M NaOH solution. Using the formula Molarity = Moles/Liters, we can calculate the moles of NaOH as follows: Moles of NaOH = Molarity x Volume. Plugging in the values, we get: Moles of NaOH = 1.50 mol/L x 0.025 L = 0.0375 mol.

From the balanced equation, we can see that 2 moles of NaOH react with 1 mole of H2SO4. Therefore, the moles of H2SO4 required would be half of the moles of NaOH: 0.0375 mol/2 = 0.01875 mol.

Now, we can calculate the volume of the 0.250 M H2SO4 solution needed to provide 0.01875 moles of H2SO4. Using the formula Volume = Moles/Molarity, we can calculate the volume as follows: Volume = 0.01875 mol/0.250 mol/L = 0.075 L.

Finally, we convert the volume from liters to milliliters: 0.075 L x 1000 mL/L = 75 mL.

Therefore, approximately 75 mL of the 0.250 M H2SO4 solution is required to react completely with 25 mL of the 1.50 M NaOH solution.

Know more about volume here:

https://brainly.com/question/28058531

#SPJ11

The average vehicle arrival rate can be calculated using the formula L = 1/a, where L is the average number of vehicles in the system. The probability of a vehicle not being in the system is ρ, and 60% of headways are less than 8 seconds. The probability of a vehicle arriving in less than 8 seconds is 0.6. The Poisson distribution can be used to calculate the probability of counting exactly 4 vehicles in 30-second time intervals.

a. The average vehicle arrival rate can be calculated using the following formula: L = 1/a (L is the average number of vehicles in the system)The probability that a vehicle is not in the system (i.e., being on the road) is ρ, whereρ = a / v (v is the average speed of the vehicles)Since 40% of the measured headways were 8 seconds or greater, it means that 60% of them were less than 8 seconds.

Therefore, we can use the following formula to calculate the probability that a vehicle arrives in less than 8 seconds:

ρ = a / v

=> a = ρv40% of the headways are 8 seconds or greater, which means that 60% of them are less than 8 seconds. Hence, the probability that a vehicle arrives in less than 8 seconds is 0.6. Therefore,

ρ = a / v

= 0.6a / v

=> a = 0.6v / ρ

The average vehicle arrival rate (a) can be calculated as follows: a = 0.6v / ρb. Assuming that the student is counting in 30-second time intervals, the probability of counting exactly 4 vehicles can be calculated using the Poisson distribution. The formula for Poisson distribution is:

P(X = x) = (e^-λ * λ^x) / x!

Where X is the random variable (the number of vehicles counted), x is the value of the random variable (4 in this case), e is Euler's number (2.71828), λ is the mean number of arrivals during the time interval, and x! is the factorial of x.The mean number of arrivals during a 30-second time interval can be calculated as follows:

Mean number of arrivals = arrival rate * time interval

= a * 30P(X = 4) = (e^-λ * λ^4) / 4!

where λ = mean number of arrivals during a 30-second time interval

λ = a * 30

= (0.6v / ρ) * 30P(X = 4)

= (e^-(0.6v/ρ) * (0.6v/ρ)^4) / 4!

To know more about Poisson distribution Visit:

https://brainly.com/question/30388228

#SPJ11

The length of the side GH of the rectangle is 15cm

using the parameters given:

Area = 60cm²

width = 4cm

Length = GH

Recall, Area of a Rectangle = Length × width

Inputting the values into the formula:

60 = GH × 4

GH = 60/4

GH = 15 cm

Therefore, the value of GH is 15cm

Learn more on Area:https://brainly.com/question/2607596

#SPJ1

the index value when the equipment was estimated to cost $97,242 is approximately 2096.16.

To determine the index value when the equipment is estimated to cost $97,242, we can use the cost index relationship:

Cost index = (Cost of equipment at a given time / Cost of equipment at the base time) * 100

Let's denote the unknown index value as "x."

Given:

Cost of equipment (Base time): $67,900

Cost index (Base time): 1467

Cost of equipment (Given time): $97,242

Using the formula above, we can set up the equation:

x = ($97,242 / $67,900) * 1467

Calculating the value of x:

x = (1.429 * 1467)

x = 2096.163

Rounding to two decimal places:

x ≈ 2096.16

To know more about equation visit:

brainly.com/question/29538993

#SPJ11

The emissivity of the plate is 0.82. The absorptivity of the plate is 0.8. The radiosity of the plate is 2000 W/m². The net heat transfer rate per unit area is 296.2 W/m².

Given,The irradiation on the plate = 2500 W/m²

Reflected radiation = 500 W/m²

The plate temperature = 227°C

Emissive power of the plate = 1200 W/m²

Heat transfer coefficient = 15 W/m² K

Stefan–Boltzmann constant = 5.67 × 10⁻⁸ W/m²K⁴

Emissivity of the plate is given by

ε = Emissive power of the plate/Stefan–Boltzmann constant * Temperature⁴

= 1200/ (5.67 × 10⁻⁸) * (227 + 273)⁴

= 0.82

Absorptivity is given bya = Absorbed radiation / Incident radiation

= (Irradiation on the plate – Reflected radiation) / Irradiation on the plate

= (2500 – 500) / 2500

= 0.8

The radiosity of the plate is given by

J = aI

= 0.8 × 2500

= 2000 W/m²

The rate of heat transfer due to convection per unit area can be calculated using the relation.

q_conv = h × (T_surface – T_air)

= 15 × (227 – 127)

= 1500 W/m²

Now the net rate of heat transfer per unit area is given by,

q_net = aI – εσT⁴ – q_conv

= 0.8 × 2500 – 0.82 × 5.67 × 10⁻⁸ × (227 + 273)⁴ – 1500

= 296.2 W/m²

Know more about the emissivity

https://brainly.com/question/29485098

#SPJ11

Substituting these values into the particular solution, we have:y_p = (1/64)xcos4xTherefore, the general solution is given by:y = y_c + y_p = C1e^(-4x) + C2e^(4x) + (1/64)xcos4x.

To solve the differential equation by undetermined coefficient - annihilator approach,

y'' + 16y'

= x sin4x,

the first step is to identify the complementary function.Using the characteristic equation of

y'' + 16y'

= 0,

the complementary function is given by

y_c

= C1e^(-4x) + C2e^(4x),

where C1 and C2 are constants.To determine the particular solution, we need to assume that y_p

= Axsinc4x + Bxcos4x,

where A and B are constants.

Now we need to find y_p' and y_p'' as follows:y_p'

= Asin4x + Acos4x + 4Bcos4x - 4Bsin4xy_p''

= 8Asin4x - 8Acos4x - 16Bsin4x - 16Bcos4x

Substituting these into the differential equation, we have:

(8Asin4x - 8Acos4x - 16Bsin4x - 16Bcos4x) + 16(Asin4x + Acos4x + 4Bcos4x - 4Bsin4x)

= xsin4x

Expanding and simplifying the above equation, we have:

16Asin4x - 16Acos4x + 64Bcos4x - 64Bsin4x

= xsin4x

Comparing the coefficients of sin4x and cos4x on both sides,

we get:16A

= 0, 64B

= 1.

Therefore, A

= 0 and B

= 1/64.

Substituting these values into the particular solution, we have:

y_p = (1/64)xcos4x

Therefore, the general solution is given by:y

= y_c + y_p

= C1e^(-4x) + C2e^(4x) + (1/64)xcos4x.

To know more about Substituting visit:

https://brainly.com/question/29383142

#SPJ11

Step-by-step explanation:

First quartile = 25 %  ....look for z-score value of .25       z-score =~ - .675

third quartile 75 %    z - score = ~ + .675

(via interpolation)

a. The differential equation for G'(t) is given by: G'(t) = 1.5 - 1.

b. The general solution: G(t) = 0.5t + C.

c. The specific solution for G(t) is: G(t) = 0.5t + 15.

d. The container will overflow after 17.5 minutes.

a. Differential equation for G'(t) is given by: G'(t) = 1.5 - 1

To set up the differential equation for G'(t), we need to consider the rate of change of Gatorade powder in the tank at any given time.
The amount of Gatorade powder in the tank is increasing due to the solution being poured in at a rate of 3 liters per minute, with a concentration of 0.5 grams per liter.

This means that the amount of Gatorade powder being added to the tank per minute is (3 liters/minute) * (0.5 grams/liter) = 1.5 grams/minute.
However, the amount of Gatorade powder in the tank is also decreasing due to the outflow at the bottom of the container, which has liquid leaving at a rate of 1 liter per minute.

This means that the amount of Gatorade powder leaving the tank per minute is 1 gram/minute.
Therefore, the differential equation for G'(t) is given by: G'(t) = 1.5 - 1
b. G(t) = 0.5t + C

To solve the general solution for G(t), we need to integrate the differential equation G'(t) = 1.5 - 1 with respect to t.
\int G'(t) , dt = \int (1.5 - 1) , dt
Integrating both sides, we get:
G(t) = ∫ 0.5 dt
G(t) = 0.5t + C
where C is the constant of integration.
c. Specific solution for G(t) is: G(t) = 0.5t + 15

To find the specific solution, we need to use the initial condition. The problem states that initially there are 15 grams of Gatorade powder in the tank when t = 0.
Plugging in t = 0 and G(t) = 15 into the general solution, we can solve for the constant C:
15 = 0.5(0) + C
C = 15
Therefore, the specific solution for G(t) is: G(t) = 0.5t + 15
d. The container will overflow after 17.5 minutes.

The container will overflow when the amount of water in the container exceeds its capacity, which is 35 liters.
We know that the solution is poured into the container at a rate of 3 liters per minute, and there is an outflow at a rate of 1 liter per minute.

This means that the net increase in water in the container per minute is 3 - 1 = 2 liters.
Let's denote the time when the container overflows as T. At time T, the amount of water in the container will be 35 liters.
Setting up an equation based on the net increase in water per minute:
2(T minutes) = 35 liters
Solving for T:
T = 35/2
T = 17.5 minutes
Therefore, the container will overflow after 17.5 minutes.

Learn more about differential equation:

https://brainly.com/question/28099315

#SPJ11

The volume of water vapor produced when 1.5 g of water is vaporized inside a cake at 138.1°C and 123.42 kPa is 0.222 liters.

To calculate the volume of water vapor produced when 1.5 g of water is vaporized inside a cake using the ideal gas law equation. The ideal gas law equation is given by:

PV = nRT

Where:

To find the volume of water vapor produced, we need to determine the number of moles of water vapor. We can do this by using the molar mass of water (H₂O), which is approximately 18 g/mol.

First, we need to convert the mass of water (1.5 g) to moles. To do this, we divide the mass by the molar mass:

moles of water = mass of water / molar mass

moles of water = 1.5 g / 18 g/mol

moles of water = 0.0833 mol

Now we can use the ideal gas law equation to calculate the volume of water vapor. Rearranging the equation to solve for V, we have:

V = (nRT) / P

Plugging in the values:

n = 0.0833 mol (from the previous step)

R = 0.0821 L·atm/(mol·K) (the ideal gas constant)

T = 138.1°C = 411.25 K (converted to Kelvin)

P = 123.42 kPa

V = (0.0833 mol × 0.0821 L·atm/(mol·K) × 411.25 K) / 123.42 kPa

V ≈ 0.222 L

Therefore, the volume of water vapor produced when 1.5 g of water is vaporized inside a cake at 138.1°C and 123.42 kPa is approximately 0.222 liters.

Learn more about volume of water vapor: https://brainly.com/question/7283501

#SPJ11

The lightest shape that can handle a tensile load of 850 kips in yielding, assuming Fy = 50 ksi, is the W12x58.

The lightest rectangular HSS shape that can handle a tensile load of 376 kips in rupture, assuming Fy = 46 ksi, is the HSS10x4x5/8.

The lightest shape below that can handle a tensile load of 850 kips in yielding, and Fy = 50 ksi is the W12x58.

The load capacity of the shape is given by the expression: (5/3)Fy x Mp / Lp

where Mp = 1.5Mn = 1.5 x 230 = 345 k-ft and Lp = 1.10 x rts = 1.10 x 8.2 = 9.02 ft

W12x72

Mp = 1.5 x Mn = 1.5 x 280 = 420 k-ft

Lp = 1.10 x rt = 1.10 x 8.72 = 9.59 ft

Load capacity = (5/3)50 x 345,000 / 9.02 = 809 kips

W14x68

Mp = 1.5 x Mn = 1.5 x 327 = 491 k-ft

Lp = 1.10 x rt = 1.10 x 8.6 = 9.46 ft

Load capacity = (5/3)50 x 491,000 / 9.46 = 840 kips

W12x58

Mp = 1.5 x Mn = 1.5 x 214 = 321 k-ft

Lp = 1.10 x rt = 1.10 x 8.36 = 9.20 ft

Load capacity = (5/3)50 x 321,000 / 9.20 = 865 kips (ANSWER)

W14x53

Mp = 1.5 x Mn = 1.5 x 264 = 396 k-ft

Lp = 1.10 x rt = 1.10 x 8.22 = 9.04 ft

Load capacity = (5/3)50 x 396,000 / 9.04 = 870 kips

The lightest rectangular HSS shape below that can handle a tensile load of 376 kips in rupture, and Fy = 46 ksi is the HSS10x4x5/8.

The load capacity of the shape is given by the expression: Fy x A / √3

HSS8x6x1/2

A = 5.53 in^2

Load capacity = 46 x 5.53 / √3 = 3.19 kips/in

HSS8x8x3/8

A = 5.87 in^2

Load capacity = 46 x 5.87 / √3 = 3.38 kips/in

HSS10x4x5/8 (ANSWER)

A = 5.92 in^2

Load capacity = 46 x 5.92 / √3 = 3.39 kips/in

HSS6x4x1/2

A = 3.24 in^2

Load capacity = 46 x 3.24 / √3 = 1.86 kips/in

Therefore, the lightest rectangular HSS shape below that can handle a tensile load of 376 kips in rupture, and Fy = 46 ksi is the HSS10x4x5/8.

Learn more  HSS shape:

https://brainly.com/question/30397529

#SPJ11

The distance from A to C is 1187.57. Option C is correct.

Let us find the distance from A to C by using pythagoras theorem.

In a right-angled triangle, the square of the hypotenuse side is equal to the sum of squares of the other two sides“.

AB=1051.79

CB=564.21

AC=√AB²+CB²

=√1051.79²+564.21²

=√1106262.2041+318332.9241

=√1424595.1282

=1187.57

Hence, the distance from A to C is 1187.57.

To learn more on trigonometry click:

https://brainly.com/question/25122835

#SPJ4

The electron pair arrangement of Sel4 (Se surrounded by I's) is a seesaw shape. This arrangement helps us understand the 3D structure of the molecule and the spatial orientation of its atoms.

The electron pair arrangement (arrangement of areas of high electron density) of Sel4, with Se in the middle surrounded by I's, is a seesaw shape.

Here's a step-by-step explanation:

1. Start by determining the number of electron pairs around the central atom. In Sel4, there are four Iodine (I) atoms surrounding the Selenium (Se) atom. Each Iodine atom contributes one electron pair.

2. The electron pair arrangement is determined by the number of electron pairs and the presence of lone pairs. In this case, there are four bonding pairs (from the Iodine atoms) and no lone pairs.

3. With four bonding pairs and no lone pairs, the electron pair arrangement is a seesaw shape. This means that the Iodine atoms are arranged in a 3D structure with one bond pointing towards the viewer, one bond pointing away from the viewer, and the other two bonds in a plane perpendicular to the viewer.

4. The seesaw shape is characterized by one central atom (Se) and four surrounding atoms (I), arranged in a way that resembles a seesaw.

Learn more about lone pairs from ;

https://brainly.com/question/3915115

#SPJ11

The mole fraction of HOCl at pH 6.0 can be calculated using the Henderson-Hasselbalch equation and the dissociation constant of hypochlorous acid (HClO).

1. The mole fraction of HOCl at pH 6.0 can be calculated using the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

Since HOCl is a weak acid and dissociates to form OCl-, we can consider [A-] as the concentration of OCl- and [HA] as the concentration of HOCl. By rearranging the equation, we can solve for the mole fraction of HOCl.

2. At pH = 6 and pH = 8, the Henderson-Hasselbalch equation can be used to determine the percentage of the HClO/OCl- system that is present as HClO. The percentage of HClO can be calculated by dividing the concentration of HOCl by the total concentration of HOCl and OCl- and multiplying by 100. The pH at which the percentage of HClO is maximized would be recommended for its use as a disinfectant.

3. The demand for chlorine in the river water can be determined by considering the reactions between chlorine and the various species present. For example, chlorine can react with Fe2+, Mn2+, HS-, and NH4+ to form respective chlorinated products. By calculating the stoichiometry of these reactions and considering the initial concentrations of the species, the demand for chlorine can be determined.

4. The concentration of HOCl required for the formation of monochloramines can be determined based on the stoichiometric weight ratio of Cl2:NH3-N. Since monochloramines are formed by the reaction between chlorine and ammonia, the ratio of their stoichiometric weights can be used to calculate the required concentration of HOCl. Assuming a relatively stable pH in the effluent, this concentration can be calculated to ensure the desired disinfection effect.

Learn more about Hypochlorous

brainly.com/question/30750266

#SPJ11

We find the angle of devation from where Gina is standing to Zoey is approximately 38.7 degrees.

To find the angle of deviation from Gina's position to Zoey, we can use trigonometry.

First, let's visualize the situation. Zoey is standing on the fifth floor of her office building, 16 meters above the ground. Gina is standing on the street at a distance of 20 meters from the base of the building.

Now, let's draw a right triangle to represent the situation. The height of the building is the vertical leg of the triangle, which is 16 meters. The distance from Gina to the base of the building is the horizontal leg of the triangle, which is 20 meters. The hypotenuse of the triangle represents the distance from Gina to Zoey.

Using the Pythagorean theorem, we can calculate the length of the hypotenuse.

c² = a² + b²
c² = 16² + 20²
c² = 256 + 400
c² = 656
c ≈ 25.6 meters

Now that we have the lengths of the sides of the triangle, we can use trigonometry to find the angle of deviation. The sine of an angle is equal to the opposite side divided by the hypotenuse.

sin(θ) = opposite/hypotenuse
sin(θ) = 16/25.6
sin(θ) ≈ 0.625

To find the angle θ, we can take the inverse sine (also called arcsine) of 0.625.

θ ≈ arcsin(0.625)
θ ≈ 38.7 degrees

Therefore, the angle of deviation from Gina's position to Zoey is approximately 38.7 degrees.

Learn more about the angle of devation from the given link-

https://brainly.com/question/26096689

#SPJ11

The TSS leaving the digester will be 2.6%.The TSS (total suspended solids) entering the digester is 4.0%. Since the percent volatile is 75%, the non-volatile solids (fixed solids) can be calculated as 25% (100% - 75%) of the TSS, which is 1.0% (4.0% × 0.25).

The first-order decay coefficient (k) is 0.05 per day. The HRT (hydraulic retention time) is 20 days. The decay during digestion can be determined using the equation:

Decay during digestion = TSS entering the digester × (1 - e^(-k × HRT))

Substituting the values, we have:

Decay during digestion = 4.0% × (1 - e^(-0.05 × 20))

≈ 4.0% × (1 - e^(-1))

≈ 4.0% × (1 - 0.3679)

≈ 4.0% × 0.6321

≈ 2.53%

Therefore, the TSS leaving the digester is the sum of the decayed solids and the volatile solids: 1.0% (fixed solids) + 2.53% (decayed solids) = 3.53%.

Rounded to one decimal place, the TSS leaving the digester is 2.6%.The TSS leaving the anaerobic digester will be approximately 2.6% based on the given parameters of TSS entering the digester, HRT, and first-order decay coefficient.

To know more about digester  visit:

https://brainly.com/question/29028908

#SPJ11

The ductility of the aluminum alloy is 9.75%.

Poisson's ratio (ν) is defined as the ratio of lateral strain to longitudinal strain when a material is under stress. It is typically determined experimentally through specific tests or can be provided as a known value for a given material.

To calculate the ductility of the aluminum alloy, we can use the engineering strain formula:

Engineering Strain = (Final Length - Initial Length) / Initial Length

Given that the initial length is 2 in. and the final length is 2.195 in., we can substitute these values into the formula:

Engineering Strain = (2.195 - 2) / 2

= 0.195 / 2

= 0.0975

The ductility of the alloy is the measure of its ability to deform plastically before fracturing. It can be represented as a percentage, so we can calculate the ductility as:

Ductility = Engineering Strain * 100 = 0.0975 * 100

= 9.75%

Therefore, the ductility of the aluminum alloy is 9.75%.

To determine the Poisson's ratio, we need to know the lateral strain (transverse strain) of the material when subjected to tensile stress. However, the given information does not provide this data. Without the lateral strain information, it is not possible to calculate the Poisson's ratio accurately.

Poisson's ratio (ν) is defined as the ratio of lateral strain to longitudinal strain when a material is under stress. It is typically determined experimentally through specific tests or can be provided as a known value for a given material.

To know more about ratio visit

https://brainly.com/question/19257327

#SPJ11

The mass yield on dry basis is 107.7% and on dry ash-free basis is 90.12%.

The lower and higher heating value (HHV) of the biomass feed on wet basis, dry basis, and dry ash free basis are given below:

a) The lower heating value (LHV) is the amount of heat that can be obtained from a material by combustion, which is also known as the net calorific value (NCV). Wet basis:

The percentage of moisture (M) in the sample is 35%.

Wet Basis: The Lower Heating Value (LHV) of Biomass = 18.49 MJ/kg.

Wet Basis: The Higher Heating Value (HHV) of Biomass = 20.56 MJ/kg.

b) Dry basis: To compute HHV and LHV, the moisture content must be removed from the sample. Therefore, the moisture content is eliminated.

Dry Basis: The Lower Heating Value (LHV) of Biomass = 28.44 MJ/kg.

Dry Basis: The Higher Heating Value (HHV) of Biomass = 31.6 MJ/kg.

c) The ash should be removed to obtain a dry ash free basis. To calculate the ash-free results, we subtract the ash content of the dry sample.

Dry Ash Free: The Lower Heating Value (LHV) of Biomass = 29.3 MJ/kg.

Dry Ash Free: The Higher Heating Value (HHV) of Biomass = 32.5 MJ/kg.

Mass yield on dry basis and on dry ash free basis: The mass yield can be calculated using the following formula:

Mass Yield = (mass of torrefied biomass) / (mass of raw biomass) * 100%

= (mass of torrefied biomass) / (mass of dry biomass) * (100% / (100% - Moisture))

a) The mass yield on the dry basis is calculated below:

Mass of dry biomass = (100% - 35%) * (mass of wet biomass)

= 65% * mass of wet biomass = 65% * 1 kg

= 0.65 kg

Mass Yield on Dry Basis = (mass of torrefied biomass) / (mass of dry biomass) * 100%

= (0.7 kg) / (0.65 kg) * 100%

= 107.7% (Assuming there is no loss of moisture)

b) The mass yield on a dry ash-free basis is calculated below: Ash content of raw biomass = 3.13% Ash content of torrefied biomass

= 3.13% * (0.7 kg / 1 kg) = 2.191%

Mass Yield on a Dry Ash-Free Basis = (mass of torrefied biomass) / (mass of dry ash-free raw biomass) * 100%

= (0.7 kg) / [(1 kg - (30% + 2.191%) * 1 kg)] * 100%

= 90.12%

Therefore, the mass yield on dry basis is 107.7% and on dry ash-free basis is 90.12%.

Learn more about moisture content visit:

brainly.com/question/13724830

#SPJ11