Calculate the percentage of water of crystalization in 35.7g Na₂CO₃ 10 H₂O

A separating funnel can separate two immiscible liquids, oil and water. Because oil and water are fully insoluble in one other, they split into two distinct layers. The upper layer is made up of oil, whereas the lower layer is made up of water.

Or you could simply remove the oil layer from the top by pouring it into another vessel, which leaves you with the water layer at the bottom.

Answer:

same

Explanation:

the first answer is correct

c. Easily Gain Electrons. Easily Gain Electrons belongs to metal elements.

Metal elements are characterized by having relatively low ionization energies and high electronegativities. This allows them to easily gain electrons from other elements in chemical reactions.Metals are chemical elements that are characterized by their ability to conduct electricity, have a metallic luster, and are malleable and ductile. They are divided into two main categories: ferrous metals, which contain iron, and non-ferrous metals, which do not.An atom can easily gain electrons by participating in a redox reaction. This is when electrons are transferred between two atoms, and the atom that receives the electrons gains them.

learn more about Metal elements Refer:brainly.com/question/17085815

#SPJ1

Answer:

Explanation:

The main reason why California has areas that are colder than Nevada, despite being at similar latitudes, is due to the influence of ocean currents. Specifically, California is impacted by a cold ocean current known as the California Current, which flows southward along the western coast of North America, while Nevada is an inland state without access to any major ocean currents.

The California Current brings cool water from the Gulf of Alaska down the coast, resulting in lower temperatures along the California coast, particularly in the northern regions. In contrast, Nevada has a desert climate with high temperatures and low humidity, due to its inland location and lack of major bodies of water.

So, the correct option would be "Cold ocean currents travel across California." (Option 2).

The total energy required to heat 38.0 g of liquid water from 55 °C to 100 °C and change it to steam at 100 °C is 94.4 kJ.

First, let's break the problem into two parts:

1. Heating the liquid water from 55 °C to 100 °C

2. Changing the liquid water to steam at 100 °C

For part 1, we can use the formula:

Q = m * c * ΔT

Where Q is the amount of heat energy required, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature.

Plugging in the values we have:

Q = 38.0 g * 4.18 J/goC * (100 °C - 55 °C)

Q = 8,692.4 J

This tells us that it takes 8,692.4 J of energy to heat the water from 55 °C to 100 °C.

For part 2, we need to find the energy required to change the water to steam. This is known as the molar heat of vaporization, which is the amount of energy required to turn one mole of a substance from a liquid to a gas.

The molar heat of vaporization of water is 40.6 kJ/mol. We need to figure out how many moles of water we have so we can use this value.

To do this, we can use the molar mass of water, which is approximately 18 g/mol.

38.0 g / 18 g/mol = 2.11 mol

So we have 2.11 moles of water.

Now we can use the formula:

Q = n * ΔH

Where Q is the amount of energy required, n is the number of moles of water, and ΔH is the molar heat of vaporization.

Plugging in the values we have:

Q = 2.11 mol * 40.6 kJ/mol

Q = 85.7 kJ

This tells us that it takes 85.7 kJ of energy to change 38.0 g of water to steam at 100 °C.

To find the total energy required, we can add the energy required for part 1 and part 2:

Total energy = 8,692.4 J + 85.7 kJ

Total energy = 94.4 kJ

Yes, He gas molecules and Xe gas molecules have the same average kinetic energy at the same temperature. This is known as the principle of equipartition of energy.

The kinetic energy of gas molecules is proportional to the absolute temperature, as per the kinetic theory of gases, which states that gases are made up of a large number of small particles that are in constant, random motion.

Gas molecules collide with each other and with the walls of the container in which they are placed as a result of this movement. The average kinetic energy of a gas molecule is proportional to the absolute temperature, which is the sum of the kinetic energies of all the gas molecules divided by the total number of molecules in the gas.

The kinetic energy of a molecule can be measured using the following equation:

KE = (1/2)mv²

Where,

Kinetic energy (KE)

m = Mass of the molecule

v = Velocity of the molecule.

Learn more about kinetic theory of gases here: https://brainly.com/question/30002049

#SPJ11

The answer you are looking for ---> 1/2 x 0.156 mole Fe2O3 x 159.59 g/mole = 12.45 g Fe2O3.

AgCl (silver chloride) is most soluble in a solution that is 0.20 M in  AgNO₃. Option B is correct.

Solubility is the property of a substance to dissolve in a solvent to form a homogeneous solution. It is typically measured as the maximum amount of a solute that can dissolve in a given amount of solvent at a specific temperature and pressure. The solubility of a substance depends on various factors, such as temperature, pressure, solvent, and the presence of other solutes in the solution.

AgCl is sparingly soluble in water, but its solubility can be increased by the presence of common ions such as Ag⁺ from AgNO₃. The addition of Ca₂⁺ or K⁺ ions from CaCl₂ or KNO₃ will not have a significant effect on the solubility of AgCl.

Hence, B. in a solution that is 0.20 M in AgNO₃ is the correct option.

To know more about Solubility here

https://brainly.com/question/22185953

#SPJ4

Rounded to the nearest tenth, answer is 0.5 moles of water.

Mass of a chemical compound divided by its amount of the substance measured in moles is molar mass.

Molar mass of HNO3 = 1(1.008) + 1(14.01) + 3(16.00) = 63.01 g/mol

Number of moles of HNO3 = 158.2 g / 63.01 g/mol = 2.51 mol

From the balanced equation, we see that 4 moles of water are produced for every 3 moles of Cu consumed. Therefore, number of moles of water produced is as:

2.51 mol HNO3 × (4 mol H2O / 8 mol HNO3) × (3 mol Cu / 8 mol HNO3) = 0.4719 mol H2O

Rounded to the nearest tenth, answer is 0.5 moles of water.

To know more about molar mass, refer

https://brainly.com/question/837939

#SPJ1

The concentration of strontium hydroxide [tex]Sr(OH)2[/tex] is zero at this point in the titration, so it does not contribute to the pH calculation.

To determine the pH of the solution at a particular point in the titration [tex]HC4H7O2[/tex], we need to construct a BCA (before, change, after) table and an ICE (initial, change, equilibrium) table.

The balanced chemical equation for the reaction is

[tex]2 HC4H7O2 + Sr(OH)2 → Sr(C4H7O2)2 + 2 H2O[/tex]

[tex]BCA Table:Reactant | HC4H7O2 | Sr(OH)2Initial | x | yChange | -2x | -yAfter | x-2x | y-y[/tex]

In the BCA table, we assume that x moles of Butyric acid [tex]HC4H7O2[/tex] and y moles of [tex]Sr(OH)2[/tex] are present in the reaction mixture. Since the stoichiometric coefficient  [tex]HC4H7O2[/tex] is 2 in the balanced equation, the change in its concentration is -2x moles, while for strontium hydroxide [tex]Sr(OH)2[/tex], it is -y moles. The final concentration of Butyric acid [tex]HC4H7O2[/tex] is (x-2x) moles and that of strontium hydroxide [tex]Sr(OH)2[/tex] is (y-y) moles.

From the ICE table, we can see that the initial concentration of Butyric acid [tex]HC4H7O2[/tex] is x moles and the concentration of[tex]H3O+[/tex] produced is 2x moles. Therefore, the pH at this point in the titration can be calculated as follows:

[tex]pH = -log[H3O+][H3O+] = 2x / V[/tex]

where V is the volume of the solution.

To learn more about pH please visit-
https://brainly.com/question/15289741
#SPJ1

Explanation:

solubility of potassium nitrate (KNO3) at 5 oC ~ 24 g/100 mL H2O The solubility of potassium nitrate (KNO3) at 25 oC ~ 40 g/100 mL H2O Potassium nitrate (KNO3) is a solid.

Answer:

8

Explanation:

The chemical formula given is:

2 CH3CHC(OH)2 SH

To determine the number of oxygen atoms, we need to count the total number of oxygen atoms in each molecule and multiply it by the number of molecules.

Let's break down the formula:

CH3CHC(OH)2 represents one molecule.

In this molecule, there are 2 oxygen atoms present in each of the two (OH) groups.

Therefore, the total number of oxygen atoms in one molecule of CH3CHC(OH)2 is 2 × 2 = 4.

Now, we have 2 molecules of CH3CHC(OH)2, so the total number of oxygen atoms will be:

2 × 4 = 8

Therefore, the total number of oxygen atoms represented by the chemical formula is 8

[tex] \: [/tex]

A neutral nucleophile such as ammonia (NH₃) can be used to make CH₃CONH₂.

To make CH₃CO₂COCH₃ from acetyl chloride (CH₃COCl), a negatively charged nucleophile such as sodium acetate (CH₃COO⁻ Na⁺) can be used. The reaction would be:

CH₃COCl + CH₃COONa → CH₃CO₂COCH₃ + NaCl

To make CH₃CONH₂ from acetyl chloride (CH₃COCl), a neutral nucleophile such as ammonia (NH₃) can be used. The reaction would be:

CH₃COCl + NH₃ → CH₃CONH₂ + HCl

A neutral nucleophile is a molecule or atom that can donate a pair of electrons to form a new covalent bond with another molecule or atom without carrying an overall positive or negative charge.

Neutral nucleophiles typically have a lone pair of electrons that they can use to form a new bond, and they do not react as readily as charged nucleophiles.

To know more about neutral nucleophile here

https://brainly.com/question/20595401

#SPJ4

Claim: According to the rule of conservation of mass, a chemical reaction's mass remains constant since the number of atoms present before and after the reaction is equal.

Evidence: Maria is correct because the chemical reaction's total reactants and total products are equal. The mass of the resulting chemicals is equal to that of the reactants.

The law of conservation of mass stipulates that atoms are neither formed, destroyed, or altered during a chemical reaction, which is why this is the case.

Word bank: number of atoms following a chemical reaction, the sum of products, not generated, amount of reactants, unchanged, reactants have the same mass, Reasoning, the mass will remain the same, assertion, and proof

The claim is made in reference to the law of conservation of mass, which stipulates that the total mass of the reactants and the total mass of the products created in a chemical reaction are equal.

This law suggests that throughout a chemical reaction, atoms are neither generated nor destroyed.

The fact that the number of atoms before and after a chemical reaction is equal is used as evidence to back up this assertion.

This is so because the total of the reactants, or the substances that first participate in the reaction, must match the total of the products. (the substances formed as a result of the reaction).

Therefore, in order for the rule of conservation of energy to apply, the masses of the reactants and products must be equal.

learn more about conservation of mass here

https://brainly.com/question/15289631

#SPJ1

The rate constant for the uncatalyzed hydrolysis of the glycosidic bond in trehalose is 1.45 × 10⁻¹³ s⁻¹, and the rate enhancement for the glycosidic bond hydrolysis catalyzed by trehalase is 1.79 × 10¹⁶.

The rate constant for the uncatalyzed hydrolysis of the glycosidic bond in trehalose can be calculated using the half-life,  [tex]t_{1/2}[/tex], which is given as 6.6 × 10⁶ years:

[tex]t_{1/2}[/tex] = ln(2) / k

Rearranging this equation gives:

k = ln(2) / [tex]t_{1/2}[/tex]

Substituting the given values, we get:

k = ln(2) / 6.6 × 10⁶ years

Using the conversion factor 1 year = 31,536,000 s, we can convert the time unit from years to seconds:

k = ln(2) / (6.6 × 10⁶ years × 31,536,000 s/year)

k = 1.45 × 10⁻¹³ s⁻¹

The rate enhancement for the catalyzed reaction can be calculated using the following equation:

Rate enhancement = (kcat / kuncat)

where kcat is rate constant for catalyzed reaction, and kuncat is  rate constant for uncatalyzed reaction.

Substituting the given values, we get:

Rate enhancement = (2.6 × 10³ s⁻¹) / (1.45 × 10⁻¹³ s⁻¹)

Rate enhancement = 1.79 × 10¹⁶

Therefore, the rate enhancement for the glycosidic bond hydrolysis catalyzed by trehalase is 1.79 × 10¹⁶, which indicates that the catalyzed reaction is much faster than the uncatalyzed reaction.

To know more about rate constant here

https://brainly.com/question/20305871

#SPJ4

--The given question is incomplete, the complete question is

"The half-life for the hydrolysis of the glycosidic bond in the sugar trehalose is 6.6 × 10⁶ years. a. What is the rate constant for the uncatalyzed hydrolysis of this bond? [Hint: For a first-order reaction, the rate constant, k, is equal to 0.693/[tex]t_{1/2}[/tex].] b. What is the rate enhancement for glycosidic bond hydrolysis catalyzed by trehalase if the rate constant for the catalyzed reaction is 2.6 × 10³ s⁻¹?"--

The given statement is True, if the concentrations of a weak acid and its conjugate base differ by more than a factor of 5, the solution does not have the capacity to resist large pH changes.

A solution's ability to resist pH changes is known as its buffer capacity. Buffer solutions are made up of a weak acid and its conjugate base or a weak base and its conjugate acid. The buffer capacity is dependent on the concentrations of these components.
For a buffer to be effective, the concentrations of the weak acid and its conjugate base should be close to each other. Ideally, they should have equal concentrations for the maximum buffering capacity. If their concentrations differ by more than a factor of 5, the buffer capacity will be significantly reduced, and the solution will not be able to resist large pH changes effectively.
In summary, when the concentrations of a weak acid and its conjugate base differ by more than a factor of 5, it is true that the solution does not have the capacity to resist large pH changes. It is important to maintain appropriate concentrations of both the weak acid and its conjugate base to ensure effective buffering capacity in the solution.

for more such question on concentrations

https://brainly.com/question/28564792

#SPJ11

The given statement is true. Zeolites hypothetically can be made attractive by adding sodium particles to them. Zeolites are utilized as sponges just and have no different purposes.

A compelling method for testing how much red color is in a watery arrangement is to gauge how much red light (620-750 nm) is consumed by the arrangement.

The expression "zeolite" was first utilized in the year 1756 by Axel Fredrik Cronstedt, a Swedish mineralogist. During a course of quickly warming a material that was seen to be stilbite, it delivered a lot of steam. This was because of the water that the material had retained before. Subsequent to seeing such turns of events, he authored the term zeolite. It has been gotten from the Greek words, ζέω (zéō), signifying "to bubble" and λίθος (líthos), signifying "stone".

Engineered zeolites are normally blended by a course of slow crystallization of a silica-alumina gel within the sight of salts and natural layouts. Curiously, various designs could be made utilizing this interaction. Aside from varieties in structures, zeolites can be fabricated or produced using different iotas making them synthetically fascinating and dynamic. For example, purported heteroatoms incorporate germanium, iron, gallium, boron, zinc, tin, and titanium.

to know more Zeolites click here:

https://brainly.com/question/14976531

#SPJ4

Answer: the paper clip is denser 2.8 g/ml

Explanation: hope this helps

The pressure in a region of outer space where there is 1 molecule/cm3 and the temperature is 3 K would be 3.91 x 10^-23 Pa.

In a region of outer space where there is 1 molecule/cm3 and the temperature is 3 K, we can use the ideal gas law to calculate the pressure. However, it is important to note that the ideal gas law assumes that the gas molecules are in constant motion and interact with each other through perfectly elastic collisions, which may not be entirely accurate for outer space conditions.

The ideal gas law is given by:

PV = nRT

where P is the pressure in pascals (Pa), V is the volume in cubic meters (m3), n is the number of moles of gas, R is the gas constant (8.314 J/(mol·K)), and T is the temperature in Kelvin (K).

We are given that there is 1 molecule/cm3 in this region of outer space. This can be converted to the number of moles of gas using Avogadro's number:

1 molecule/cm3 = 1.66 x 10^-24 mol/m3

The volume can be assumed to be very large since we are in outer space, so we can approximate it as infinity (i.e., V = ∞).

Now we can plug in the values:

PV = nRT

P(∞) = (1.66 x 10^-24)(8.314)(3)

P = 3.91 x 10^-23 Pa

Therefore, the pressure in a region of outer space where there is 1 molecule/cm3 and the temperature is 3 K is approximately 3.91 x 10^-23 Pa.

More on ideal gas can be found here: https://brainly.com/question/3961783

#SPJ1

The concentration of the nitric acid solution is 1.107 M.

We can calculate the concentration of the acid, we need to divide the volume of the acid (35 ml) by the volume of the potassium hydroxide (15.5 ml). The concentration of the nitric acid is then 2.25 m.

The concentration of acid in a 35 mL solution of nitric acid is calculated as follow

Here it is shown

Volume of nitric acid solution = 35 mL

Volume of potassium hydroxide solution = 15.5 mL

Concentration of potassium hydroxide solution = 2.5 M

Let the concentration of the nitric acid solution be C.

Moles of potassium hydroxide solution = concentration × volume = 2.5 × 15.5/1000 = 0.03875 moles

Since the acid and base are completely neutralized, the number of moles of acid and base must be equal.

So, Moles of nitric acid solution = 0.03875 M

Thus, concentration of nitric acid solution = moles/volume = 0.03875/(35/1000) = 1.107 M

Therefore, the concentration of the nitric acid solution is 1.107 M.

Learn more about nitric acid : https://brainly.com/question/22698468

#SPJ11

Five ways to quantify reactants and products for ammonia are : Mole method ; Mass method ; Volume method (at STP) ; Volume method (at non-STP conditions)  and Number of particles method.

Substance that is present at the start of any chemical reaction is called as reactant.

The chemical equation for the synthesis of ammonia (NH3) is: N2(g) + 3H2(g) ⇌ 2NH3(g)

Mole method:

Coefficients in the balanced equation already represent mole ratios between reactants and products. In this method, we would simply write:

N2: 1 mole

H2: 3 moles

NH3: 2 moles

Pattern: 1:3:2

Mass method:

To determine the masses of reactants and products, we would use their molar masses and mole ratios from balanced equation. For example:

N2: 28.02 g

H2: 6.02 g

NH3: 34.02 g

Pattern: 28.02:6.02:34.02

Volume method (at STP):

At standard temperature and pressure (STP), one mole of any gas occupies 22.4 liters. Therefore, we can use mole ratios and volume of one mole of gas to determine the volumes of the reactants and products:

N2: 22.4 L

H2: 67.2 L

NH3: 44.8 L

Pattern: 1:3:2

Volume method (at non-STP conditions):

If the gases are not at STP, we need to use ideal gas law to convert between volume, pressure, temperature, and moles.

Number of particles method:

In this method, we would use Avogadro's number to convert between moles and number of particles (atoms, molecules, ions). For example:

N2: 6.02 x 10²³ particles

H2: 1.81 x 10²⁴ particles

NH3: 1.20 x 10²⁴ particles

Pattern: 1:3:2

To know more about reactant, refer

https://brainly.com/question/26283409

#SPJ1

The mass of sodium sulfate, Na₂SO₄ obtained, given that you started with 9.75 moles of sodium hydroxide, NaOH is 692.25 grams

First, we shall determine the mole of sodium sulfate, Na₂SO₄ obtained from the reaction. Details below:

H₂SO₄ + 2NaOH -> Na₂SO₄ + 2H₂O

From the balanced equation above,

2 moles of NaOH reacted to produce 1 mole of Na₂SO₄

Therefore,

9.75 moles of NaOH will react to produce = (9.75 × 1) / 2 = 4.875 moles of Na₂SO₄

Finally, we shall determine the mass of sodium sulfate, Na₂SO₄ obtained from the reaction. Details below:

Mole = mass / molar mass

4.875 = Mass of Na₂SO₄ / 142

Cross multiply

Mass of Na₂SO₄ = 4.875 × 142

Mass of Na₂SO₄ = 692.25 grams

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

The balanced equation tells us that we need 2 molecules of HCl to react with 2 molecules of Mg.

The balanced chemical equation is:

2 Mg + 2 HCl → 2 MgCl2 + H2

To balance this equation, we need to make sure that the number of atoms of each element is the same on both sides of the equation. Here's how to balance it:

2 Mg + 2 HCl → 2 MgCl2 + H2

We see that there are already 2 magnesium atoms and 2 hydrogen atoms on the right-hand side, but only 1 hydrogen atom on the left-hand side. So we need to balance the hydrogen atoms by adding a coefficient of 2 in front of HCl:

2 Mg + 2 HCl → 2 MgCl2 + H2

Now we have 2 hydrogen atoms on both sides of the equation. However, we also added 2 chlorine atoms on the right-hand side, but only 1 chlorine atom on the left-hand side. To balance the chlorine atoms, we need to add a coefficient of 2 in front of MgCl2:

2 Mg + 2 HCl → 2 MgCl2 + H2

Now we have the same number of atoms of each element on both sides of the equation.

Learn more about  magnesium here:

https://brainly.com/question/1533548

#SPJ1

The specific rotation of the carbohydrate is 12.27 when observed rotation is 2.70 degrees at a concentration of 0.022 g/ml in a 1 dm cell

The specific rotation, denoted by [α], is a measure of the ability of a compound to rotate plane-polarized light and is defined as the observed rotation in degrees divided by the concentration in grams per milliliter and the path length in decimeters.

Mathematically, we can express it as:

[α] = observed rotation / (concentration x path length)

In this problem, we are given:

observed rotation = 2.70 degrees

concentration = 0.022 g/mL

path length = 1 dm = 10 cm

Substituting these values into the formula, we get:

[α] = 2.70 degrees / (0.022 g/mL x 10 cm)

[α] = 2.70 degrees / 0.220 g/cm³

[α] = 12.27

Learn more about the specific rotation here.https://brainly.com/question/18523033

#SPJ11

The reason why an experimental design uses multiple reactions coupled together to measure the reaction rate is because this approach offers better accuracy and precision.

The coupled reaction is used to observe the progress of an enzyme-catalyzed reaction where an intermediate in the reaction is used as a substrate. A steady-state rate is determined by measuring the rate of consumption of the intermediate molecule by the enzyme.

The main reason for the use of multiple reactions coupled together is to produce better accuracy and precision. This is because measuring one reaction does not always provide a complete picture of the chemical process in question.

By coupling multiple reactions together, it is possible to obtain a more comprehensive understanding of the chemical process taking place. This approach also allows scientists to determine the rate of reactions more accurately and precisely. This means that the results obtained will be more reliable and therefore more valuable to the scientific community.

Learn more about experimental designs at

https://brainly.com/question/28145500

#SPJ11

Answer:

Diffusion is the movement of molecules from an area of high concentration to an area of low concentration. It occurs due to the random movement of molecules and is temperature-dependent. Diffusion is important in processes such as gas exchange in the lungs and the absorption of nutrients from the small intestine.

Osmosis, on the other hand, is the movement of water molecules across a semipermeable membrane from an area of high water concentration to an area of low water concentration. In other words, it is the diffusion of water molecules. Osmosis is essential for many biological processes such as the transport of water from the roots to the leaves of plants and the regulation of water balance in animal cells.

Answer:

Diffusion : Tendency of particles in a gas or liquid to become evenly distributed by moving from areas of greater concentration to areas of lesser concentration.

Osmosis : Is the diffusion of water through a differential permeable membrane.

Explanation:

Diffusion example : When a perfume bottle is opened in a corner of a room the scent becomes distributed throughout the air in the room

Osmosis : Mesh bag filled with marbles and sand only the sand goes through

A limiting reagent refers to the reagent present in a reaction that will limit the quantity of product generated. The yield of a reaction is calculated by calculating the percent yield. The percent yield is a percentage representation of the number of products generated by a reaction compared to the amount of product that should be generated based on stoichiometry or the total number of products that should be generated in the absence of loss or side reactions.

In cases where a reagent other than styrene is the limiting reagent, the presumptions made for the calculations become invalid, and hence the calculated results become inaccurate or unreliable. The reason why a reagent other than styrene could become the limiting reagent is as follows:

To learn more about "percent yield", visit:  https://brainly.com/question/30944610

#SPJ11

According to the octet rule, atoms tend to achieve eight electrons in their outermost shell. So the correct answer is C. eight.

The octet rule is a chemical rule of thumb that states that atoms of low atomic number tend to combine in such a way that they each have eight electrons in their valence shells, giving them the same electronic configuration as a noble gas. The rule is applicable to the main-group elements, especially carbon, nitrogen, oxygen, and the halogens. It is based on the observation that when atoms have eight electrons in their outermost shell, they are chemically stable and less likely to react with other atoms.

Learn more about atoms here: brainly.com/question/30898688

#SPJ4

Answer:

we have a certain amount of Cl2 and want to calculate how much CCl4 we need, we would use the ratio of 1 mole of CCl4 for every 2 moles of Cl2.

Explanation:

The balanced chemical equation for the reaction of CCl4 to Cl2 is:

CCl4 → 2Cl2

From the equation, we can see that for every one molecule of CCl4, two molecules of Cl2 are produced.

This means that the molar ratio of CCl4 to Cl2 is 1:2.

In other words, if we start with one mole of CCl4, we would expect to produce two moles of Cl2. Conversely, if we have a certain amount of Cl2 and want to calculate how much CCl4 we need, we would use the ratio of 1 mole of CCl4 for every 2 moles of Cl2

Answer: 121.2416 psi

Explanation: