Answer:
Total ATP molecules produced = 66 molecules of ATP
Explanation:
A 10-carbon fatty acid when it has undergone complete oxidation will yield 5 acetyl-CoA molecules and 4 FADH₂ and 4 NADH molecules each. Each of the 5 acetyl-CoA molecules enters into the citric acid cycle and is completely oxidized to yield further ATP and FADH₂ and NADH molecules.
The total yield of ATP in the various enzymatic step is calculated below:
Acyl-CoA dehydrodenase = 4 FADH₂
β-Hydroxyacyl-CoA dehydrogenase = 4 NADH
Isocitrate dehydrogenase = 5 NADH
α-Ketoglutarate dehydrogenase = 5 NADH
Succinyl-CoA synthase = 5 ATP (from substrate-level phosphorylation of GDP)
Succinate dehydrogenase = 5 FADH₂
Malate dehydrogenase = 5 NADH
Total ATP from FADH₂ molecoles = 9 * 1.5 = 13.5
Total NADH molecules = 19 * 2.5 = 47.5
Total ATP molecules produced = 13.5 + 47.5 + 5
Total ATP molecules produced = 66 molecules of ATP
Answer:
Number of ATP generated = = [tex]64 ATPs[/tex]Explanation:
First, calculate the number of acetyl-CoA molecules formed:
Number of acetyl-CoA molecules = [tex]\frac{number of carbons in fatty acid}{2}[/tex]
[tex]= \frac{10}{2}\\\\ = 5 acetyl-CoA molecules[/tex]
Next, calculate the number of rounds of beta-oxidation:
Number of rounds = number of acetyl-CoA molecules - 1
[tex]= 5 - 1\\\\ = 4 rounds[/tex]
Calculate the number of ATP from NADH and FADH2:
If each NADH yields 2.5 ATPs and each FADH2 yields 1.5 ATPs, then multiply the number of rounds by 4 and multiply the number of acetyl-CoA molecules by 10.
[tex](4 * 4) + (5 * 10) = 66 ATP[/tex]
Subract two ATP molecules for activation of the fatty acid.
[tex]Total ATP = 66 - 2\\\\ = 64 ATPs[/tex]
For more information on this visit
https://brainly.com/question/23379286
2
Select the correct answer
in a redex reaction, what folle does the reducing agent play?
OA. it gives up electrons
OB. it keeps electrons
OC. it takes electrons
OD. it takes onygen atoms
Answer:
A. it gives up electrons
Explanation:
In a redox reaction, the reducing agent is the element or compound that undergoes oxidation and gives up electrons. The oxidizing agent is the element or compound that undergoes reduction and gains electrons.
Hope that helps.
A. Identify the structure drawn below.
Answer:
Hexane
Explanation:
You have a carbon structure with only single bonds. This means that the name will end in -ane.
There are 6 carbon atoms. This means that the name will begin with hex-.
The structure is hexane.
Hydrogen Bonding with Water - Your Drug Lotensin Directions: Show the structure of your molecule below. Illustrate all ways that your molecule could form hydrogen bonds with water, either as a hydrogen donor or as a target (receiver) of hydrogen bonds from water. Do this by drawing bent water molecules as necessary and representing hydrogen bonds between water and the drug using dashed RED lines (---). Be sure that it is exactly clear which atoms on each molecule are involved in the hydrogen bonds. If your drug molecule is not capable of forming hydrogen bonds with water, fully explain why not below.
Answer:
See figure 1
Explanation:
For this question, we have to remember that a hydrogen bond is an interaction in which we have a partial attraction between a positive dipole and a negative dipole, and in this attraction, we have in the middle a hydrogen atom.
In this interaction, we can have a donor (positive dipole) or a receptor (negative dipole). The receptor is a heteroatom (an atom different to carbon or hydrogen) with high electronegativity. The donor is usually hydrogen atom bonded to the heteroatom.
I hope it helps!
Benzene boils at 80.10 °C and has a molal boiling constant, k b, of 2.53 C/m. When 2.15 g of a compound is dissolved in 20.0 g of benzene, the resulting solution has a boiling point of 81.10 °C. What is the molality of the solute?
Answer:
[tex]m=0.395mol/kg[/tex]
Explanation:
Hello,
This is a problem about boiling point elevation which is modeled via:
[tex]\Delta T=i*m*Kb[/tex]
Whereas for this solvent (nonpolar, nonionizing), the van't Hoff factor is one. In such a way, the molality of the solute is simply computed as shown below:
[tex]m=\frac{\Delta T}{Kb}=\frac{(81.10-80.10)\°C}{2.53\°C/m} \\\\m=0.395mol/kg[/tex]
In this manner, we can also compute the molar mass of the solute by noticing 20.0 g (0.020 kg) of benzene were used:
[tex]n=0.395mol/kg*0.020kg=7.9x10^{-3} mol[/tex]
And considering the 2.15 g of the solute:
[tex]Molar\ mass=\frac{2.15g}{7.9x10^{-3}mol}\\ \\Molar\ mass=271.975g/mol[/tex]
Best regards.
what is the meaning of the word tetraquark?
Answer:
A tetraquark in physics is an exotic meson composed of four valence quarks.
Explanation:
It has been suspected to be allowed by quantum chromodynamics, the modern story of strong interactions.
Hope it helps.
oxygen get stable configuration by ____________two electrons
please give the answer as fast as you can
please
Answer:
gaining two electrons
Explanation:
electron configuration
2:6
so add two to 6 to get stable 2:8
g If attempting to dissolve both silver bromide and silver chloride in aqueous solution through complex ion formation, which data will be the most relevant?
Answer:
Kf
Explanation:
The stability constant Kf of a given complex specie is an equilibrium constant that represents the formation of that particular complex specie in solution. It measures the strength of the interaction between the ligands and metal that form the particular complex specie. The magnitude of Kf shows how easily a complex specie is formed in solution.
Hence if I want to dissolve the bromides or chlorides of silver which are ordinarily insoluble in water by means of complex formation, the magnitude of the stability constant for each particular complex specie is important as it gives information regarding the thermodynamic feasibility of the process.
How to do this
Q1 and Q2
Only want to know how to find molecular formula
Answer:
Question 1
A. Empirical formula is C8H8O3
B. Molecular formula is C8H8O3
Question 2.
A. Empirical formula is CH2
B. Molecular formula is C4H8
Explanation:
Question 1:
A. Determination of the empirical formula:
Carbon (C) = 63.2%
Hydrogen (H) = 5.26%
Oxygen (O) = 31.6%
Divide by their molar mass
C = 63.2/12 = 5.27
H = 5.26/1 = 5.26
O = 31.6/16 = 1.975
Divide by the smallest
C = 5.27/1.975 = 2.7
H = 5.26/1.975 = 2.7
O = 1.975/1.975 = 1
Multiply through by 3 to express in whole number
C = 2.7 x 3 = 8
H = 2.7 x 3 = 8
O = 1 x 3 = 3
Therefore, the empirical formula for the compound is C8H8O3
B. Determination of the molecular formula of the compound.
From Avogadro's hypothesis, 1 mole of any substance contains 6.02×10²³ molecules.
Now from the question given, we were told that 1 molecule of the compound has a mass of 2.53×10¯²² g.
Therefore, 6.02×10²³ molecules will have a mass of = 6.02×10²³ x 2.53×10¯²² = 152.306 g
Therefore, 1 mole of the compound = 152.306 g
The molecular formula of the compound can be obtained as follow:
[C8H8O3]n = 152.306
[(12x8) + (1x8) + (16x3)]n = 152.306
[(96 + 8 + 48 ]n = 152.306
152n = 152.306
Divide both side by 152
n = 152.306/152
n = 1
The molecular formula => [C8H8O3]n
=> [C8H8O3]1
=> C8H8O3
Question 2:
A. Determination of the empirical formula of the compound.
Mass sample of compound = 0.648 g
Carbon (C) = 0.556 g
Mass of Hydrogen (H) = mass sample of compound – mass of carbon
Mass of Hydrogen (H) = 0.648 – 0.556
Mass of Hydrogen (H) = 0.092 g
Thus, the empirical formula can be obtained as follow:
C = 0.556 g
H = 0.092 g
Divide by their molar mass
C = 0.556/12 = 0.046
H = 0.092/1 = 0.092
Divide by the smallest
C = 0.046/0.046 = 1
H = 0.092/0.046 = 2
Therefore, the empirical formula of the compound is CH2.
B. Determination of the molecular formula of the compound.
Mole of compound = 0.5 mole
Mass of compound = 28.5 g
Molar mass of compound =.?
Mole = mass /Molar mass
0.5 = 28.5/ Molar mass
Cross multiply
0.5 x molar mass = 28.5
Divide both side by 0.5
Molar mass = 28.5/0.5 = 57 g/mol
Thus, the molecular formula of compound can be obtained as follow:
[CH2]n = 57
[12 + (1x2)]n = 57
14n = 57
Divide both side by 14
n = 57/14
n = 4
Molecular formula => [CH2]n
=> [CH2]4
=> C4H8.
Draw the curved arrow mechanism for the reaction between (2R,3R)-3,5-dimethylhexan-2-ol and PCl3.
Answer:
Sn2 mechanism
Explanation:
In this case, our nucleophile is the "OH" on (2R,3R)-3,5-dimethylhexan-2-ol. The alcohol group will attack the [tex]PCl_3[/tex] to produce a new bond between O and P with a positive charge in the oxygen. Additionally, when the OH attacks a Br atom leaves the molecule producing a bromide ion.
In the next step, the bromide ion produced will attack the carbon bonded to the OH that now is bonded to [tex]PCl_2[/tex]. An Sn2 reaction takes place and the substitution would be made in only one step. Due to this, we will have an inversion in the stereochemistry and the absolute configuration on carbon 2 will change from "R" to "S" to produce (2S,3R)-2-bromo-3,5-dimethylhexane.
I hope it helps!
Reduction occurs at which electrode?
Answer:
negative charge electrode
Explanation:
In cathode positive ions are picked up to perform reduction.At the same time negative ions are picked up at anode to get oxidized from electrolyte.
Answer:
The electrode that removes ions from the solution :) a p e x
how are mass and weight affected in chemical reactions?
Answer:
How the chemical reacts
Explanation:
Which of the following statements is not true for an exothermic reaction? Question options: The products have a higher heat content than the reactants. The temperature of the reaction system increases. The temperature of the surroundings increases. Heat passes from the reaction system to the surroundings. The enthalpy change for the reaction is negativ
Answer:
The products have a higher heat content than the reactants.
Explanation:
The statement above is not true for an exothermic reaction because in an exothermic reaction heat is released to the surroundings. This simply means that the total energy of the products is less than that of the reactants.
A solution containing lead(II) nitrate is mixed with one containing sodium bromide to form a solution that is 0.0630 M in Pb(NO3)2 and 0.0103 M in NaBr. What is the value of Q for the insoluble product? Express the reaction quotient to three significant figures.
Answer:
Q = 6.68x10⁻⁶
Explanation:
The initial solutions are Pb(NO₃)₂ and NaBr. As sodium and nitrates salts are soluble, the insoluble product must be the formed from the other ions, PbBr₂.
The soluble product equilibrium is written as:
PbBr₂(s) ⇄ Pb²⁺(aq) + 2Br⁻(aq)
Where Q is defined as:
Q = [Pb²⁺] [Br⁻]²
As:
[Pb²⁺] = 0.0630M
[Br⁻] = 0.0103M
Q = [Pb²⁺] [Br⁻]²
Q = [0.0630M] [0.0103M]²
Q = 6.68x10⁻⁶Consider the reaction between two solutions, X and Y, to produce substance Z: aX + bY → cZ When 500. mL of a 1.8 M solution of X is combined with 500. mL of a 1.8 M solution of Y, the resulting solution has a concentration of 0.60 M Y and 0.60 M Z. No more of substance X remains in the flask. 1. How many moles each of X and Y are present before the reaction occurs? 2. How many moles each of Y and Z are present after the reaction occurs? 3. How many moles each of X and Y have reacted? 4. What is the balanced equation for this reaction?
Answer:
1. 0.90 are the initial moles of X and Y
2. 0.60 moles are the moles of Y and Z after the reaction
3. 0.90 moles of X and 0.30 moles of Y
4. 3X + 1Y → 2Z
Explanation:
1. For the reaction, initial moles of X and Y are:
500mL = 0.500L × (1.8 moles / L) = 0.90 are the initial moles of X and Y
2. After the reaction. The total volume is 500mL + 500mL = 1L
Moles Y and Z = 1L × (0.60 moles / 1L) = 0.60 moles are the moles of Y and Z after the reaction
3. As there is no moles of X after the reaction, all X reacts, that is 0.90 moles of X. And moles of Y that reacts are 0.90 mol - 0.60mol = 0.30 moles of Y
4. That means 3 moles of X reacts per mole of Y 0.90/0.30 = 3. Also, 2 moles of Z are produced per mole of Y 0.60/0.30 = 2.
That means balanced equation is:
aX + bY → cZ
3X + 1Y → 2ZIdentify some other substances (besides KCl) that might give a positive test for chloride upon addition of AgNO3. Based on the reactant used in your experiment, do you think it is reasonable to exclude these types of substances as contaminants that would give a false positive when you tested your reaction residue to verify that it is KCl?
Answer:
Other substances that give a positive test with AgNO3 are other chlorides present, iodides and bromide. However iodides and bromides have different colours hence they will not give a false positive test for KCl. Other chlorides present may lead to a false positive test for KCl.
Explanation:
In the qualitative determination of halogen ions, silver nitrate solution is used. Various halide ions give various colours of precipitate with silver nitrate. Chlorides yield a white precipitate, bromides yield a cream precipitate while iodides yield a yellow precipitate. All these ions or some of them may be present in the system.
However, if other chlorides are present, they will also yield a white precipitate just as KCl leading to a false positive test for KCl. Since other halogen ions yield precipitates of different colours, they don't lead to a false test for KCl. We can exclude other halides from the tendency to lead us to a false positive test for KCl but not other chlorides.
In the qualitative analysis test of chloride upon addition of AgNO₃, presence of diffrerent chloride salts other than KCl will gives false test.
How do we get on addition of KCl in AgNO₃?On adding halogens on the silver nitrate solution we will get the precipitate of diffrent colors of diffrent halides.
Chlorides will gives white color precipiate in the silver nitrate solution, so KCl and other chlorides will also give white color precipitate.Bromides will gives cream color precipitate.Iodides will gives yellow color precipitate.So, presence of diffrent chloride salt in the silver nitrate solution in addition with KCl will gives a false positive result for the test.
To know more about qualitative analysis, visit the below link:
https://brainly.com/question/1779681
Calculate how much acetylene (C2H2) will be produced from 358 g of H2O and an excess of CaC2 if the percent yield for this reaction is 94.5%. CaC2 2 H2O --> C2H2 Ca(OH)2
Answer:
244.7 g of acetylene
Explanation:
The balanced reaction equation is shown below;
2H20 (l) + CaC2 (s) → Ca(OH)2 (s) + C2H2 (g)
Number of moles of were reacted = reacting mass/molar mass = 358g/18gmol-1 = 19.89 moles of water
From the balanced reaction equation;
2 moles water yields 1 mole of acetylene
19.89 moles of water will yield 19.89 × 1/2 = 9.945 moles of acetylene
Theoretical yield of acetylene = 9.945 moles of acetylene × molar mass of acetylene
Molar mass of acetylene = 26.04 g/mol
Theoretical yield of acetylene = 9.945 moles of acetylene × 26.04 g/mol
Theoretical yield of acetylene = 258.9678 g of acetylene
% yield = actual yield/ theoretical yield × 100
94.5 = actual yield/258.9678 g × 100
Actual yield= 94.5 × 258.9678 g/100
Actual yield = 244.7 g of acetylene
8.670 mL + 9.87 mL=
Answer:18.4 ML
Explanation:
easy add
Potassium iodide reacts with lead(II) nitrate in the following precipitation reaction: 2 KI(aq) + Pb(NO3)2(aq) → 2 KNO3(aq) + PbI2(s) What minimum volume of 0.400 M potassium iodide solution is required to completely precipitate all of the lead in 310.0 mL of a 0.112 M lead(II) nitrate solution?
Answer:
0.1736 L or 173.6 ml
Explanation:
Number of moles of lead II nitrate is obtained by;
Number of moles = concentration × volume of solution
Concentration= 0.112 M
Volume of solution= 310 ml
n= 0.112 × 310/1000
n= 0.03472 moles
From the reaction equation;
2 moles of potassium iodide reacted with 1 mole of lead II nitrate
x moles of potassium iodide will react with 0.03472 moles of lead II nitrate
x= 2 × 0.03472 moles= 0.06944 moles of potassium iodide
Volume of potassium iodide solution = number of moles/ concentration = 0.06944/ 0.4
Volume of potassium iodide solution= 0.1736 L or 173.6 ml
Calculate the pH of a buffer solution obtained by dissolving 18.0 g of KH2PO4(s) and 35.0 g of Na2HPO4(s) in water and then diluting to 1.00 L.
Answer:
pH of the buffer is 7.48
Explanation:
The H₂PO₄⁻/HPO₄²⁻ buffer has a pKa of 7.21. You can find pH of this buffer following H-H equation:
pH = pKa + log [A⁻] / [HA]
pH = 7.21 + log [HPO₄²⁻] / [ H₂PO₄⁻]
Where [] represents molarity of each specie of the buffer and, as volume is 1.00L, also represents its moles.
Thus, to find pH of the buffer we need to calculate moles of each specie, thus
Moles of 18.0g of KH₂PO₄(Molar mass: 136.086g/mol) = moles of H₂PO₄⁻ are:
18.0g KH₂PO₄ ₓ (1mol / 136.086g) = 0.132 moles of KH₂PO₄= H₂PO₄⁻
Moles of 35.0g of Na₂HPO₄(Molar mass: 141.96g/mol) = moles of HPO₄²⁻ are:
35.0g Na₂HPO₄ ₓ (1mol / 141.96g) = 0.2465 moles of Na₂HPO₄= HPO₄²⁻
Replacing in H-H equation:
pH = 7.21 + log [HPO₄²⁻] / [ H₂PO₄⁻]
pH = 7.21 + log [0.2465] / [0.132]
pH = 7.48
pH of the buffer is 7.48
How does a balanced chemical equation show the conservation of mass?
A. It shows that the number of each type of atom stays the same.
B. It shows that the mass of the products is greater than the mass of
the reactants when a reaction increases the moles of substances.
C. It shows that the total number of moles of substances stays the
same.
D. It shows that the mass of the reactants is greater than the mass
Answer:
A. It shows that the number of each type of atom stays the same.
Explanation:
Though you may see a change in the way they are arranged, the same number of atoms are present before and after. Balanced chemical equations show equal numbers of atoms of each element on each side of the equation.
Need help finding major products
Answer:
Explanation:
RX + AgNO₃ = R⁺ ( carbocation ) + AgX + NO₃⁻
C₂H₅OH ( a nucleophile ) + R⁺ = ROC₂H₅
C₅H₁₁X + AgNO₃ = C₅H₁₁⁺ + AgX + NO₃⁻
In the first case carbocation produced is CH₃CH₂CH₂CH₂CH₂⁺
CH₃CH₂CH₂CH₂CH₂⁺ ⇒ CH₃CH₂CH₂C⁺HCH₃ ( secondary carbocation more stable )
CH₃CH₂CH₂C⁺HCH₃ + C₂H₅OH ⇒ CH₃CH₂CH₂CH(OC₂H₅)CH₃
Hence option D is correct .
b )
In the second case carbocation produced is
CH₃CH₂CH₂CH⁺CH₃
CH₃CH₂CH₂C⁺HCH₃ + C₂H₅OH ⇒ CH₃CH₂CH₂CH(OC₂H₅)CH₃
The product formed is same as in case of first
Option B is correct
14. Which group of diamagnetic transition metals exhibits trends in density and melting points that don't match the same trends seen in
other groups?
A. Group 3
B. Group 12
C. Group 7
D. Group 11
Answer:
Group 12
Explanation:
Group 12 transition metals are diamagnetic. They behave properties that distinguish them. They naturally have twelve electrons hence their outermost shell is fully filled.
Transition metals have high densities which increases down the group. However, the increase in density of transition elements of group 12 varies with temperature at a rate that is quite different from other transition elements. Hence the differences in the value of melting points and density changes by only a very small amount as you come down group 12 compared to other groups of transition elements.
Compound X absorbs photons with a wavelength of 179.3 nm. What is the increase in energy of a 0.115 M solution of compound X in which a mole of photons are absorbed
Answer:
Explanation:
one mole of photon will contain
6.02 x 10²³ no of photons
energy of one photon = h x f
= h c / λ
h is plank's constant , c is velocity of light and λ is wavelength
= 6.6 x 10⁻³⁴ x 3 x 10⁸ / 179.3 x 10⁻⁹
= .11 x 10⁻¹⁷ J
energy of one mole of photon
= 6.02 x 10²³ x .11 x 10⁻¹⁷
= .6622 x 10⁶ J
Calculate the quantity of energy produced per gram of U-235 (atomic mass = 235.043922 amu) for the neutron-induced fission of U-235 to form Xe-144 (atomic mass = 143.9385 amu) and Sr-90 (atomic mass = 89.907738 amu). Express your answer in joules per gram to three significant figures.
Answer:
To calculate the amount of energy produced per gram from Uranium- 235 we call on the formula:
delta(m)= mass of the products - mass of reactants
Given the atomic mass of Xe-144 = 143.9385 amu; atomic mass of Sr-90= 89.907738 amu; atomic mass of U-235= 235.043922 amu
Therefore:
delta(m)= (143.9385 + 89.907738) - (235.043922) = -1.197682 amu
Recall that to calculate energy in joules, we use the formula:
Energy = mc^2
Therefore: Energy = (-1.197582/6.022 x 10^26)kg x (3 x 10^8 m/s)^2
= -1.7898104 x 10^-10 J
= (-1.7898104 x 10^-10 x 6.022 x 10^23/235.043922)
= -4.586 x 10^11 J per gram of energy released
Explanation:
To calculate the amount of energy produced per gram from Uranium- 235 we call on the formula:
delta(m)= mass of the products - mass of reactants
Given the atomic mass of Xe-144 = 143.9385 amu; atomic mass of Sr-90= 89.907738 amu; atomic mass of U-235= 235.043922 amu
Therefore:
delta(m)= (143.9385 + 89.907738) - (235.043922) = -1.197682 amu
Recall that to calculate energy in joules, we use the formula:
Energy = mc^2
Therefore: Energy = (-1.197582/6.022 x 10^26)kg x (3 x 10^8 m/s)^2
= -1.7898104 x 10^-10 J
= (-1.7898104 x 10^-10 x 6.022 x 10^23/235.043922)
= -4.586 x 10^11 J per gram of energy released
Differentiate between
expansion of solid and liquid
In a liquid, the expansion is a little more than in
solids. The bonds in a liquid are weaker than in a
solid, so as you heat up a liquid, the particles can
move around each other faster and in so doing,
move further apart. Solids and liquids occupy a
'set' volume at a certain temperature.
A plot of 1/[BrO-] vs. time is linear and the slope is equal to 0.056 M-1s-1. If the initial concentration of BrO- is 0.65 M, how long will it take one-half of the BrO- ion to react
Answer:
time taken for one-half of the BrO⁻ ion to react is t= 27.45 secs
Explanation:
equation of reaction
3BrO⁻(aq) → BrO₃⁻(aq) + 2Br⁻(aq) (second order reaction)
given
the slope of the graph is 0.056M⁻¹s⁻¹ = k(constant)
initial concentration [A]₀ = 0.65M
for second order reaction,we can calculate the time taken for one-half of the BrO- ion to react using:
[tex]\frac{1}{[A]}[/tex] =[tex]\frac{1}{[A]}[/tex]₀ ⁺ k × t
where initial concentration [A]₀ = 0.65M
[A] = [A]₀÷2 = 0.325M
[tex]\frac{1}{0.325M}[/tex] = [tex]\frac{1}{0.65M}[/tex] + 0.056M⁻¹s⁻¹ × t
3.077= 1.54 + 0.056t
3.077-1.54=0.056t
1.537=0.056t
t= 27.45 secs
Calculate the amount of HCl in grams required to react with 3.75 g of CaCO3 according to the following reaction: CaCO3(s) + 2 HCl(aq) → CaCl2(aq) + H2O(l) + CO2(g)
Answer:
The correct answer is 2.75 grams of HCl.
Explanation:
The given balanced equation is:
CaCO₃ (s) + 2HCl (aq) ⇒ CaCl₂ (aq) + H₂O (l) + CO₂ (g)
Based on the given information, one mole of calcium carbonate is reacting with two moles of HCl. The molecular mass of HCl is 36.5 grams, thus, the mass of 2 moles of HCl will be, 36.5 × 2 = 73 grams
The molecular mass of CaCO₃ is 100 gram per mole, that is, the mass of 1 mole of CaCO₃ is 100 grams, therefore, the mass of HCl required for reacting with 3.75 grams of CaCO₃ will be,
= 3.75 × 2 × 36.5 / 100 = 2.74 grams of HCl.
Which best describes the total mass of a sample of water when it condenses
from a liquid to a gas?
A. The mass is less because the water molecules get closer together
and take up more space.
B. The mass is the same because the decrease in energy equals the
increase in the number of molecules.
C. The mass is the same because water molecules are not created or
destroyed during a phase change.
D. The mass is greater after water condenses because the mass of
the molecules increases.
Answer:
Its C I hopefully help you
Q1. Calculate the amount of copper produced in 1.0 hour when aqueous CuBr2 solution was electrolyzed by using a current of 4.50 A. Q2. In another electroplating experiment, if electric current was passed for 3 hours and 2.00 g of silver was deposited from a AgNO3 solution, what was the current used in amperes
Answer:
[tex]\boxed{\text{Q1. 3.6 g; Q2. 0.2 A}}[/tex]
Explanation:
Q1. Mass of Cu
(a) Write the equation for the half-reaction.
Cu²⁺ + 2e⁻ ⟶ Cu
The number of electrons transferred (z) is 2 mol per mole of Cu.
(b) Calculate the number of coulombs
q = It
[tex]\text{t} = \text{1.0 h} \times \dfrac{\text{3600 s}}{\text{1 h}} = \text{3600 s}\\\\q = \text{3 C/s} \times \text{ 3600 s} = \textbf{10 800 C}[/tex]
(c) Mass of Cu
We can summarize Faraday's laws of electrolysis as
[tex]\begin{array}{rcl}m &=& \dfrac{qM}{zF}\\\\& = &\dfrac{10 800 \times 63.55}{2 \times 96 485}\\\\& = & \textbf{3.6 g}\\\end{array}\\\text{The mass of Cu produced is $\boxed{\textbf{3.6 g}}$}[/tex]
Note: The answer can have only two significant figures because that is all you gave for the time.
Q2. Current used
(a) Write the equation for the half-reaction.
Ag⁺ + e⁻ ⟶ Ag
The number of electrons transferred (z) is 1 mol per mole of Ag.
(a) Calculate q
[tex]\begin{array}{rcl}m &=& \dfrac{qM}{zF}\\\\2.00& = &\dfrac{q \times 107.87}{1 \times 96 485}\\\\q &=& \dfrac{2.00 \times 96485}{107.87}\\\\& = & \textbf{1789 C}\\\end{array}[/tex]
(b) Calculate the current
t = 3 h = 3 × 3600 s = 10 800 s
[tex]\begin{array}{rcl}q&=& It\\1789 & = & I \times 10800\\I & = & \dfrac{1789}{10800}\\\\& = & \textbf{0.2 A}\\\end{array}\\\text{The current used was $\large \boxed{\textbf{0.2 A}}$}[/tex]
Note: The answer can have only one significant figure because that is all you gave for the time.
Iron(II) is available to bond with chloride ion. How many of each type of ion will bond to form an ionic compound?
A) 3 iron(II), 1 chloride
B) 2 iron(II), 3 chloride
C) 2 iron(II), 1 chloride
D) 1 iron(II), 2 chloride
Answer:
D) 1 iron(II), 2 chloride
Explanation:
Iron II chloride is the compound; FeCl2. It is formed as follows, ionically;
Fe^2+(aq) + 2Cl^-(aq) -----> FeCl2
The formation of one mole of FeCl2 involves the reaction one mole of iron and two moles of chloride ions. This means that in FeCl2, the ratio of iron to chlorine is 1:2 as seen above.
Therefore there is one iron II ion and two chloride ions in each mole of iron II chloride, hence the answer.