The force required to stop a car of mass 1400 kg in 2 seconds if it is moving with a velocity of 10 m/s is 7000 N in the opposite direction to the car's motion.
Calculate the force required to stop a car of mass 1400 kg in 2 seconds if it is moving with a velocity of 10 m/s.
To solve the given problem, we can use the equation:
F = (m * Δv) / Δt
where F = force
required to stop the carm = mass of the car Δv = change in velocity = final velocity - initial velocityΔt = time taken to stop the car.
Given, mass of the car, m = 1400 kg Initial velocity, u = 10 m/s Final velocity, v = 0 m/s Time taken to stop, t = 2 seconds Therefore, Δv = v - u = 0 - 10 = -10 m/s
Substituting the given values in the above equation, we get:
F = (m * Δv) / Δt = (1400 kg * (-10 m/s)) / (2 s) = -7000 N
Here, the negative sign indicates that the force required to stop the car is acting in the opposite direction to the car's motion.
for such more question on force
https://brainly.com/question/12785175
#SPJ11
a box rests on an incline. if the coefficient of static friction between the box and the incline is 0.400, at what minimum angle would the box begin to move?
The minimum angle at which the box would begin to move is given by the equation $\mu_{s} = \tan{\theta}$,is 21.8°.
Let's consider the following diagram: In the above, m is the mass of the box, θ is the angle of the incline, N is the normal force, f is the force of friction, and mg is the gravitational force acting on the box in the downward direction.
The box will be at the threshold of sliding up or down the plane when the gravitational force acting down the plane is greater than the frictional force acting up the plane. Therefore, the minimum angle at which the box will start to move is:tanθ = μswhere μs is the coefficient of static friction=0.4 (Given). Thus,θ= tan-1 (0.4)θ = 21.8 degrees.
Therefore, the box will start to move when the angle of inclination of the plane is 21.8 degrees (minimum angle).
Read more about mass:
https://brainly.com/question/19385703:
#SPJ11
determine how the number of turns in the electromagnet the strength of the magnetic field produced by the electromagnet.
The number of turns in the electromagnet is the strength of the magnetic field produced by the electromagnet:
For a coil of wire: H = [tex]\frac{I.N}{L}[/tex]For straight conductor: H = [tex]\frac{1}{2.phi.r}[/tex]The strength or intensity of а coils mаgnetic field depends on the following fаctors.
The number of turns of wire within the coil.The аmount of current flowing in the coil.The explanation of the equations above, where:
H is the strength of the mаgnetic field in аmpere-turns/metre, Аt/mN is the number of turns of the coilI is the current flowing through the coil in аmps, АL is the length of the coil in metres, mThe mаgnetic field strength of the electromаgnet аlso depends upon the type of core mаteriаl being used аs the mаin purpose of the core is to concentrаte the mаgnetic flux in а well defined аnd predictаble pаth.
For more information about the strength of the magnetic field refers to the link: https://brainly.com/question/28104888
#SPJ11
a perfectly elastic spring requires 0.54 jof work to stretch 6 cm from its equilibrium position. (a) what is its spring constant k? (b) how much work is required to stretch it an additional 6 cm?
The work required to stretch the elastic spring an additional 6 cm is 2.16 J.
(a) To find the spring constant k, we can use the formula:
[tex]W = (1/2) k x^2[/tex]
where W is the work done, k is the spring constant, and x is the displacement from the equilibrium position. Rearranging this formula to solve for k, we get:
[tex]k = 2W / x^2[/tex]
Substituting the given values, we have:
[tex]k = 2(0.54 J) / (0.06 m)^2[/tex]
k = 300 N/m
Therefore, the spring constant of the elastic spring is 300 N/m.
(b) To find the work required to stretch the spring an additional 6 cm, we can use the same formula:
[tex]W = (1/2) k x^2[/tex]
where x is the additional displacement from the equilibrium position. The total displacement from the equilibrium position is 6 cm + 6 cm = 12 cm = 0.12 m.
Substituting the values, we have:
[tex]W = (1/2) (300 N/m) (0.12 m)^2W = 2.16 J[/tex]
To know more about " elastic springs. here
https://brainly.com/question/28997611
#SPJ4
at time an object is traveling to the right along the axis at a speed of with acceleration which statement is true? (a) the object will slow down, eventually coming to a complete stop. (b) the object cannot have a negative acceleration and be moving to the right. (c) the object will continue to move to the right, slowing down but never coming to a complete stop. (d) the object will slow down, moment
The statement that is true for an object traveling to the right along the axis at a speed of with acceleration is "the object will slow down, eventually coming to a complete stop. So, Option A is correct.
Kinetic Friction is the resistive force that opposes the movement or motion of two interacting surfaces in relative motion. It is due to the interactions between surfaces when there is some movement between the two. The frictional force opposes the motion of the object and tends to bring it to a halt or slow it down.
Let us now consider the given options:
(a) The object will slow down, eventually coming to a complete stop. This statement is true. The object will slow down and come to a complete stop.
(b) The object cannot have a negative acceleration and be moving to the right. Thus, this statement is not true. The object can have a negative acceleration and still be moving to the right.
(c) The object will continue to move to the right, slowing down but never coming to a complete stop. Thus, this statement is not true. The object will come to a complete stop.
(d) The object will slow down, moment. Thus, this statement is not complete. It does not explain what will happen after slowing down.
Therefore, option (a) is the correct option.
To know more about Kinetic Friction, refer here:
https://brainly.com/question/30886698#
#SPJ11
A pole-vaulter clears a crossbar and takes 1.0 s to fall from the apex of his flight to the landing pit. What was his downward vertical velocity at the end of this second? a. 4.9 m/s b. 9.81 m/s c. 1.0 m/s d. 19.62 m/s
The pole vaulters downward vertical velocity at the end of this second is. 9.81 m/s. The correct option is b.
When an object falls freely under gravity, its velocity increases at a constant rate of 9.81 m/s^2. This acceleration due to gravity is denoted by 'g' and has a magnitude of 9.81 m/s^2 on the surface of the Earth.
In the given problem, the pole-vaulter is falling freely under gravity after clearing the crossbar. The time taken for him to fall is 1.0 s. Therefore, his final downward velocity can be calculated using the formula:
v = g * t
where v is the final velocity, g is the acceleration due to gravity, and t is the time taken for the fall.
Substituting the values, we get:
v = 9.81 m/s^2 * 1.0 s = 9.81 m/s
Therefore, the downward vertical velocity of the pole-vaulter at the end of the second is 9.81 m/s, which is the answer (option b).
To know more about vertical velocity, refer here:
https://brainly.com/question/30559316#
#SPJ11
horses that move with the fastest linear speed on a merry-go-round are located anywhere, because they all move at the same speed. near the center. near the outside.
Horses that move with the fastest linear speed on a merry-go-round are located near the outside.
A merry-go-round is an amusement park ride that comprises a rotating circular platform equipped with seats or mounts for people to ride on. When the ride is operating, the circular platform rotates around a fixed central axis at a constant velocity, while the people on it rotate with the platform. Linear speed refers to the velocity of the object in a straight line path, regardless of its direction of movement.
Therefore, the linear speed of the mounts on the merry-go-round depends on the radius of the circular path they move on. The closer the horse is to the center, the shorter the path it has to cover during one rotation of the platform, meaning it has a slower linear speed. Conversely, the farther the horse is from the center, the longer the path it has to cover, hence it has a faster linear speed. As a result, the mounts located near the outside of the merry-go-round move with the fastest linear speed.
Learn more about the linear speed at:
https://brainly.com/question/12707353
#SPJ11
how much work is done by a person lifting a 6.7-kg object from the bottom of a well at a constant speed of 2.5 m/s for 9 s? write your answer in joules.
The amount of work done by a person lifting a 6.7-kg object from the bottom of a well at a constant speed of 2.5 m/s for 9 s is 1517.25 Joules.
The work done is determined using the equation below;
W = FdW = mgd
Where,W = Work done by the person,m = mass of object = 6.7 kg,g = acceleration due to gravity = 9.8 md = distance lifted by the person = ?We know that F = m(g + a) where a is the acceleration of the object that was lifted. The object is lifted at a constant velocity and so the acceleration of the object is zero. Hence,
F = mgF = 6.7 × 9.8F = 65.66 N
We can now determine the distance d that was lifted using the equation below;
d = vt
Where,v = constant velocity = 2.5 m/s.t = time taken = 9 s
Substituting the values; d = 2.5 × 9d = 22.5 m
Now we can determine the work done;
W = FdW = 65.66 × 22.5W = 1472.85 Joules (3 decimal places)
The work done by the person lifting a 6.7-kg object from the bottom of a well at a constant speed of 2.5 m/s for 9 s is 1517.25 Joules (2 decimal places)Answer: 1517.25 Joules.
More on work: https://brainly.com/question/29568084
#SPJ11
a 75-kg solid cylinder, 2.5 m long and with an end radius of 5.0 cm, stands on one end. how much pressure does it exert?
The pressure exerted by the cylinder is 93,630 Pa.
Given data:
Mass of cylinder (m) = 75 kg
Length of cylinder (l) = 2.5 m
Radius of cylinder (r) = 5.0 cm = 0.05 m
The pressure exerted by the cylinder can be calculated using the formula:
P = F/A where P is the pressure, F is the force and A is the area of the surface over which the force is applied.
Area of the circular end of the cylinder, A = πr²= π(0.05)²= 0.00785 m²
Weight of cylinder: W = mg where g is the acceleration due to gravity (9.8 m/s²)W = 75 × 9.8W = 735 N
Now, the force exerted on the ground by the cylinder is equal to the weight of the cylinder, so, F = 735 N
Thus, the pressure exerted by the cylinder is, P = F/A= 735/0.00785= 93,630 Pa
Therefore, the pressure exerted by the cylinder is 93,630 Pa.
To know more about pressure click here:
https://brainly.com/question/29830939
#SPJ11
assume 100 units of energy enters the earth atmosphere system at the top of the atmosphere (toa). how much energy leaves the system?
The amount of energy that leaves the Earth's atmosphere system is 100 units of energy.
According to the conservation of energy principle, energy can neither be created nor destroyed, it can only be transformed from one form to another. Therefore, the energy that enters the Earth's atmosphere system is absorbed, reflected, and emitted as heat.
In simpler terms, some of the energy is reflected back into space, some of it is absorbed by the Earth's surface and is emitted back as heat, and some of it is trapped by greenhouse gases in the atmosphere. Ultimately, the amount of energy that leaves the system is approximately equal to the amount of energy that enters the system.
Thus, the amount of energy that leaves the Earth's atmosphere system is 100 units of energy.
To know more about greenhouse gases click here:
https://brainly.com/question/14131369
#SPJ11
when 115 v is applied across a wire that is 10 m long and has a 0.30 mm radius, the magnitude of the current density is 1.4 x 108 find the resisitivty of the wire
When 115 V is applied across a wire that is 10 m long and has a 0.30 mm radius, the magnitude of the current density is 1.4 x [tex]10^{-8}[/tex] A/m2, therefore the resistivity of the wire is 8.214 x [tex]10^{-8}[/tex] Ω m
How To Calculate The Resistivity Of The Wire?The resistivity of the wire can be calculated using the formula ρ = E/J, where ρ is the resistivity, E is the electric field, and J is the current density. The electric field E can be calculated using the formula E = V/L, where V is the voltage applied and L is the length of the wire. Thus, E = 115 V/10 m = 11.5 V/mThe current density J is given as1.4 x [tex]10^{-8}[/tex] A/m2. Using the formula,ρ = E/J= 11.5 V/m/1.4 x 108 A/m2= 8.214 x [tex]10^{-8}[/tex] Ω m.
Therefore, the resistivity of the wire is 8.214 x [tex]10^{-8}[/tex] Ω m. The resistivity of a material is a measure of its ability to oppose the flow of electric current. It is defined as the resistance per unit length and cross-sectional area of a wire. The resistivity of a material depends on various factors, including its chemical composition, temperature, and impurities. It is an important property of materials used in electrical and electronic applications.
Learn more about the resistivity at https://brainly.com/question/17010736
#SPJ11
find the net work w done on the particle by the external forces during the particle's motion.express your answer in terms of f and s . gg done on the particle by the external forces during the particle's motion. to understand the meaning and possible applications of the work-energy theorem. in this problem, you will use your prior knowledge to derive one of the most important relationships in mechanics: the work-energy theorem. we will start with a special case: a particle of mass m moving in the x direction at constant acceleration a . during a certain interval of time, the particle accelerates from vi to vf , undergoing displacement is given by s
The net work (W) done on the particle by the external forces during its motion can be expressed in terms of the initial (Ki) and final (Kf) kinetic energies as: [tex]W = ((1/2) \times m \times vf^2) - ((1/2) \times m \times vi^2)[/tex]
To find the net work (W) done on the particle by the external forces during the particle's motion in terms of the initial (Ki) and final (Kf) kinetic energies, we will use the work-energy theorem. The work-energy theorem states that the net work done on an object is equal to the change in its kinetic energy.
Step 1: Calculate the initial kinetic energy (Ki) and final kinetic energy (Kf).
Ki = (1/2) * m * vi²
Kf = (1/2) * m * vf²
Step 2: Calculate the change in kinetic energy (ΔK) as the difference between Kf and Ki.
ΔK = Kf - Ki
Step 3: According to the work-energy theorem, the net work (W) done on the particle by the external forces during its motion is equal to the change in kinetic energy (ΔK).
W = ΔK
Step 4: Substitute the expressions for Ki and Kf from step 1 into the equation for W from step 3.
W = ((1/2) * m * vf²) - ((1/2) * m * vi²)
In conclusion, the net work (W) done on the particle by the external forces during its motion can be expressed in terms of the initial (Ki) and final (Kf) kinetic energies as: W = ((1/2) * m * vf²) - ((1/2) * m * vi²)
To know more about work refer here:
https://brainly.com/question/31050706#
#SPJ11
Complete Question:
Find the net work W done on the particle by the external forces during the motion of the particle in terms of the initial and final kinetic energies. Express your answer in terms of Ki and Kf. Work done on the particle by the external forces during the particle's motion. To understand the meaning and possible applications of the work-energy theorem. In this problem, you will use your prior knowledge to derive one of the most important relationships in mechanics: the work-energy theorem. We will start with a special case: a particle of mass m moving in the x direction at constant acceleration a . During a certain interval of time, the particle accelerates from vi to vf, undergoing displacement is given by s=xf −xi.
a 3.52 volt potential difference is placed across a 1,829.90 ohm resistor. how many electrons pass through the resistor in 3.85 seconds?
Given that a 3.52 volt potential difference is applied to a 1,829.90 ohm resistor, the current that passes through the resistor can be calculated by using Ohm's law. According to Ohm's law, current is equal to the potential difference divided by the resistance, so the current that passes through the resistor is 3.52 volts / 1,829.90 ohms = 0.0019265 amps.
Next, the number of electrons that pass through the resistor in 3.85 seconds can be calculated. The number of electrons is equal to the current multiplied by the time. So, 0.0019265 amps x 3.85 seconds = 7.43 x 10^-5 coulombs. Since one coulomb is equal to 6.24 x 10^18 electrons, the number of electrons that pass through the resistor in 3.85 seconds is 7.43 x 10^-5 x 6.24 x 10^18 = 4.6 x 10^13 electrons.
Know more about Ohm's law here
https://brainly.com/question/1247379#
#SPJ11
alston and thana discuss the electric force, and thana challenges alston to think of a force that is not fundamentally an electric force. which of alston's responses is correct?
The electric force is the force that exists between two electrically charged objects or particles. The force is either repulsive or attractive depending on whether the objects have the same or opposite charges, respectively. Electric force can be calculated using Coulomb's law.
Alston answered that gravity is a force that is not fundamentally an electric force. This statement is correct because gravity is a fundamental force that acts between two massive objects. It does not depend on electric charges. The force of gravity is always attractive and can be calculated using Newton's law of universal gravitation.
The other fundamental forces in the universe are the strong nuclear force and the weak nuclear force. These forces are responsible for holding the nucleus of an atom together and are not electric in nature.
Learn more about force at:
brainly.com/question/949418
#SPJ11
A resistor and a capacitor are connected in series across an ideal battery. At the moment contact is made with the battery the voltage across the capacitor is
a. equal to the battery's terminal voltage. b. less than the battery's terminal voltage, but greater than zero. c. zero.
When a resistor and a capacitor are connected in series across an ideal battery, the voltage across the capacitor is zero at the moment contact is made with the battery.
The correct option is c.
An ideal battery is a voltage source that delivers a constant voltage regardless of the load resistance or current drawn from it.
An ideal battery can maintain a steady voltage regardless of the amount of current being drawn from it.
In real-life batteries, there is always some internal resistance, which causes the voltage to drop as the current increases.
A resistor is an electrical component that opposes or limits the flow of electrical current. It has two terminals and can be made of various materials like carbon, metal, and ceramic. It is used in various applications, including voltage dividers, current limiting, and biasing.
A capacitor is an electronic component that stores energy in an electric field between two charged conductors. It has two terminals and is made of two conducting plates separated by an insulating material called a dielectric.
Capacitors are used in various applications, including energy storage, timing circuits, and power conditioning.
To Learn more :
https://brainly.com/question/17134302
#SPJ11
we already know that the electric field varies as the square of the distance between two point charges. why do the equations for the electric field above vary as distance cubed in the denominator?
The electric field of two point charges is inversely proportional to the cube of the distance between the two charges. This is because the electric field decreases exponentially with the increase in distance. Therefore, the equation for electric field varies as distance cubed in the denominator.
The electric field is an electric force that affects the space around electric charges. The cause of the electric field is the presence of positive and negative electric charges. The electric field can be described as lines of force or field lines.
The inverse square law states that the electric field at any point decreases as the square of the distance from the source. This means that the electric field decreases faster as the distance between two charges increases. Therefore, the equation for the electric field varies as distance cubed in the denominator to reflect this exponential decrease.
Learn more about inverse square law at https://brainly.com/question/30404562
#SPJ11
a stone is thrown upward from ground level. the initial speed is 176 feet per second. how high will it go?
The stone thrown upward from ground level with an initial speed of 176 feet per second will reach a maximum height of: approximately 564 feet
To calculate the maximum height, we must use the equation of motion, which states that the final velocity is equal to the initial velocity plus the acceleration times the time. We know the initial velocity (176 feet per second) and the acceleration is equal to the acceleration due to gravity, which is -32 feet per second squared.
Since we do not know the time, we can solve it using the equation Vf = Vi + at. Solving for t, we get[tex]t = (Vf-Vi)/a[/tex], where Vf is 0 and Vi is 176 feet per second. Thus,[tex]t = (0-176)/(-32)[/tex], and t = 5.5 seconds.
Using the equation of motion, we can find the maximum height by using the equation [tex]H = Vi*t + (1/2)*a*t^2[/tex]. We plug in our values and get[tex]H = 176*5.5 + (1/2)*(-32)*5.5^2 = 564 feet.[/tex]
Therefore, the stone thrown upward from ground level with an initial speed of 176 feet per second will reach a maximum height of approximately 564 feet.
To know more about speed refer here:
https://brainly.com/question/28224010#
#SPJ11
a quantity that has a direction associated with?
A vector is a quantity that has a direction associated with it, and working with vectors involves identifying, representing, performing operations, resolving into components, and analyzing the vector.
A quantity that has a direction associated with it is called a vector. Vectors are used to describe physical quantities, such as velocity, force, and displacement, that have both magnitude and direction. To work with vectors, you can follow these steps:
1. Identify the vector quantity: Determine which physical quantity is being described and ensure it has both magnitude and direction.
2. Represent the vector: Vectors can be represented using arrows, where the length of the arrow represents the magnitude, and the direction of the arrow indicates the direction of the vector.
3. Perform vector operations: You may need to add, subtract, multiply, or divide vectors to solve problems. These operations involve working with both the magnitude and direction of the vectors.
4. Resolve the vector into components: Break the vector down into its horizontal and vertical components, which makes it easier to work with in calculations.
5. Analyze the vector: Use the components and other relevant information to solve the problem or analyze the situation.
For similar question on vector
https://brainly.com/question/28047791
#SPJ11
what are the wavelengths (nm) for the ultraviolet and visible ranges of the electromagnetic spectrum in order of increasing energy? lower energy
The wavelengths (in nanometers) for the ultraviolet and visible ranges of the electromagnetic spectrum, in order of increasing energy (lower to higher).
The wavelengths (nm) for the ultraviolet and visible ranges of the electromagnetic spectrum are given below;
Wavelengths for the ultraviolet range of the electromagnetic spectrum: 100-400 nm
Wavelengths for the visible range of the electromagnetic spectrum: 400-700 nm
Wavelengths are measured in nanometers (nm). In order of increasing energy, the electromagnetic spectrum is arranged as follows:
Radio waves < microwaves < infrared radiation < visible light < ultraviolet radiation < X-rays < gamma rays.
Learn more about the Electromagnetic spectrum here:
https://brainly.com/question/23423065
#SPJ11
what is the term for an orbit that electrons occupy at a fixed distance from the nucleus; designated 1, 2, 3, 4 ...? group of answer choices energy level orbital shell subshell none of the above
The term for an orbit that electrons occupy at a fixed distance from the nucleus is called an energy level.
What are energy levels?Electrons occupy specific energy levels in an atom, which are determined by the amount of energy required to move an electron from its present energy level to the next higher energy level. The energy levels are designated by a number, which ranges from one to seven. The lowest energy level is one, and the highest energy level is seven.
Electrons in the first energy level are the closest to the nucleus, while electrons in the seventh energy level are the farthest away.
Learn more about energy levels here: https://brainly.com/question/14287666.
#SPJ11
Fill in the blank:the equilibrium constant, k, relates quantity of products to reactants at a point when the reaction is ____.
The equilibrium constant, k, relates the quantity of products to reactants at a point when the reaction is at equilibrium.
What is equilibrium?Equilibrium is a state in which the rate of the forward reaction is equal to the rate of the reverse reaction, resulting in the concentration of the reactants and products remaining unchanged. A reaction is said to be in equilibrium when it has reached a state of dynamic balance.
The equilibrium constant (Kc) is a measure of the extent to which a reaction proceeds to form products. The equilibrium constant is a ratio of the concentration of the products to the concentration of the reactants at equilibrium. The value of Kc varies with temperature and depends on the stoichiometry of the balanced chemical equation.
The larger the value of Kc, the greater the concentration of products relative to reactants at equilibrium. Similarly, a smaller value of Kc indicates a greater concentration of reactants at equilibrium. The equilibrium constant is useful in predicting the direction in which a chemical reaction will proceed.
If the value of Kc is greater than one, the equilibrium favors the products, and if the value of Kc is less than one, the equilibrium favors the reactants. If the value of Kc is equal to one, the reaction is said to be at equilibrium, and the concentration of the reactants and products is equal.
To know more about equilibrium refer here:
https://brainly.com/question/30694482#
#SPJ11
how much heat is lost through a 3' x 5' single-pane window with a storm that is exposed to a temperature differentia
The amount of heat lost through a 3' x 5' single-pane window with a storm that is exposed to a temperature differential is 108 BTU per hour.
The U-factor is a measure of how well a window insulates against heat transfer. The lower the U-factor, the better the window insulates.
The temperature difference is the difference between the inside and outside temperatures.The area of the window is the size of the window.Using these factors, we can calculate the rate of heat loss through the window in units of BTUs per hour.
Assuming a U-factor of 1.2 and a temperature difference of 60°F, the calculation would be:
Heat Loss = 1.2 BTU/(hrft^2F) x 15 ft^2 x 60°F
Heat Loss = 108 BTU/hour
Therefore, the heat lost through the window is 108 BTU per hour.
To know more about heat loss click here:
https://brainly.com/question/14228650
#SPJ11
Complete Question:
How much heat is lost through a 3' × 5' single-pane window with a storm that is exposed to a 60 Fahrenheit temperature differential?
a second identical block is dropped onto the first from a height of 4.20 m m above the first block and sticks to it. what is the maximum elastic potential energy stored in the spring during the motion of the blocks after the collision? express your answer with the appropriate
The maximum elastic potential energy stored in the spring during the motion of the blocks after the collision is 164 J.
Since the two blocks stick together after the collision, they move together as a single mass. We can use conservation of energy to find the maximum elastic potential energy stored in the spring during the motion of the blocks after the collision.
Initially, the system has potential energy due to the gravitational field:
[tex]U_i = mgh[/tex]
where m is the total mass of the system, g is the acceleration due to gravity, and h is the initial height of the second block above the first.
When the blocks hit the spring, they compress it and store elastic potential energy. At the point of maximum compression, all of the initial potential energy has been converted to elastic potential energy:
[tex]U_e = (1/2)kx^2[/tex]
where k is the spring constant and x is the maximum compression of the spring.
By conservation of energy, the initial potential energy must be equal to the maximum elastic potential energy:
[tex]U_i = U_emgh = (1/2)kx^2[/tex]
Solving for x, we get:
[tex]x = sqrt(2mgh/k)[/tex]
The spring reaches its maximum compression when the blocks momentarily come to rest. At this point, all of the initial potential energy has been converted to elastic potential energy, so the maximum elastic potential energy is:
[tex]U_e = (1/2)kx^2 = (1/2)k(2mgh/k) = mgh[/tex]
Substituting the given values, we get:
[tex]U_e = (2.00 kg + 2.00 kg)(9.81 m/s^2)(4.20 m) = 164 J[/tex]
Therefore, the maximum elastic potential energy stored in the spring during the motion of the blocks after the collision is 164 J.
To know more about "- potential energy here
https://brainly.com/question/16705765
#SPJ4
describe how milliamperage influences the quantity of the xray beam and identify the range of milliamperage required for dental imaging
Milliamperage (mA) influences the quantity of the X-ray beam by controlling the amount of current passing through the X-ray tube. For dental imaging, the range of milliamperage required typically falls between 7 mA and 15 mA.
Milliamperage refers to the current or quantity of electrons moving through the x-ray tube to produce radiation. The milliamperage is responsible for controlling the amount of x-rays produced in a given time period. Radiation intensity is directly proportional to the milliamperage.
A higher milliamperage results in a greater number of electrons passing through the x-ray tube, which creates more x-rays. The milliamperage controls the quantity of radiation produced by the x-ray beam. Dental x-ray machines are designed with a pre-set milliamperage range that is appropriate for dental imaging.
Know more about Dental x-ray machines here:
https://brainly.com/question/29789903
#SPJ11
what forces rick lieberman's plane to make an emergency landing? question 8 options: a. severe thunderstorms b. severe turbulence c. an ash cloud d. they ran out of coffee
The force that made Rick Lieberman's plane to make an emergency landing is b. severe turbulence.
Severe turbulence is sudden and violent turbulence that causes changes in altitude and altitude variations from the horizon. Turbulence is a natural phenomenon that can occur at any time, even when the skies are clear and blue.It can cause damage to the airplane and injure passengers, and it is a source of constant concern for pilots.
Severe turbulence is particularly dangerous because it can cause the plane to drop or gain altitude quickly, which can cause passengers to lose consciousness or be thrown from their seats. It is for this reason that planes are designed to withstand significant turbulence, and pilots receive extensive training on how to navigate through it. The correct option among the following given options is severe turbulence.
Learn more about turbulence at:
https://brainly.com/question/28102157
#SPJ11
a 35.0-kg bucket is lowered by a rope with constant velocity of 7.11 m/s. what is the tension in the rope?
The tension in the rope is 343.35 N.
To solve this question, we need to apply Newton's second law. In this scenario, the bucket is being lowered at a constant speed.
This means that the acceleration is zero. The forces acting on the bucket are gravity and tension.
Let's apply Newton's second law:ΣF = ma
Forces in the vertical direction:ΣF = 0
The forces acting on the bucket in the vertical direction are gravity (Fg) and tension (T).
Since the acceleration is zero, the net force must also be zero.
Therefore, the magnitude of the upward force (T) must be equal to the magnitude of the downward force (Fg).
Fg = mg
where m is the mass of the bucket and g is the acceleration due to gravity.
The force of tension can be calculated as follows:T = mg = (35.0 kg)(9.81 m/s²) = 343.35 N
The tension in the rope is 343.35 N.
To learn more about tension:
https://brainly.com/question/13397436#
#SPJ11
he maximum power rating of the electric motor is 145 watts. using the motor at this maximum rated power, how long will it take to accelerate a 2.00 kg car from 5.00 m/s to 11.6 m/s if we neglect all frictional losses?
It will take 0.7 seconds to accelerate the car from 5.00 m/s to 11.6 m/s, neglecting all frictional losses.
The power rating of an electric motor is measured in watts (W). A motor with a power rating of 145 W has the capacity to deliver 145 joules of energy per second.
The energy required to accelerate a 2.00 kg car from 5.00 m/s to 11.6 m/s can be calculated using the equation E = 0.5mv^2.
Here, m is the mass of the car (2.00 kg), and v is the difference in speed (11.6 m/s - 5.00 m/s).
This gives us E = 0.5 x 2.00 x (11.6 - 5.00)^2 = 74.48 J.
Since the motor can deliver 145 J of energy per second, it will take 0.5145/74.48 = 0.7 seconds to accelerate the car from 5.00 m/s to 11.6 m/s, neglecting all frictional losses.
For more such questions on Power Rating.
https://brainly.com/question/30265811#
#SPJ11
a raindrop has a mass of 5.2 x 10-7 kg and is falling near the surface of earth. (a) calculate the magnitude of the gravitational force exerted on the raindrop by earth. (b) calculate the magnitude of the gravitational force exerted on earth by the raindrop.
The magnitude of the gravitational force exerted on the raindrop by the earth is: 4.86 x 10-5 N
and the magnitude of the gravitational force exerted on earth by the raindrop is: 4.86 x 10-5 N
(a) The gravitational force on a 5.2 x 10-7 kg raindrop falling close to the surface of Earth is calculated in this question. We can use Newton's law of universal gravitation to determine the gravitational force between two objects. The force between two objects is proportional to the product of their masses and inversely proportional to the square of the distance between them.
The formula is as follows: F = G(m1m2 / r2)Where F is the gravitational force, G is the gravitational constant, m1, and m2 are the masses of the two objects, and r is the distance between them. The mass of the Earth is approximately 5.97 x 1024 kg, and its radius is approximately 6.38 x 106 m.
The gravitational constant is 6.67 x 10-11 Nm2/kg2. If we substitute the given values in the formula, F = (6.67 x 10-11 Nm2/kg2) x (5.2 x 10-7 kg x 5.97 x 1024 kg) / (6.38 x 106 m)2 = 4.86 x 10-5 N
(b) We can use Newton's third law to determine the magnitude of the gravitational force exerted by the raindrop on Earth. According to the third law, for every action, there is an equal and opposite reaction.
As a result, the magnitude of the gravitational force exerted on Earth by the raindrop is the same as the magnitude of the gravitational force exerted on the raindrop by Earth. The magnitude of the gravitational force is 4.86 x 10-5 N, according to the previous calculation. So the gravitational force exerted on Earth by the raindrop is 4.86 x 10-5 N.
According to Newton's law of universal gravitation, the gravitational force between two objects is proportional to the product of their masses and inversely proportional to the square of the distance between them. The gravitational force on a raindrop falling close to Earth's surface can be calculated using this law.
The gravitational force exerted by the raindrop on Earth is equal in magnitude to the gravitational force exerted on the raindrop by Earth, according to Newton's third law.
To know more about gravitational force refer here:
https://brainly.com/question/12528243#
#SPJ11
a 5-kg shark swimming at 1 m/s swallows an absent-minded 1-kg fish swimming toward it at 4 m/s. the speed of the shark after his meal is
The speed of the shark after it swallows the fish is calculated using the conservation of momentum principle. The total momentum before the collision is 5 kg * 1 m/s + 1 kg * 4 m/s = 9 kg * m/s. The total momentum after the collision is 5 kg * v, where v is the speed of the shark after the collision. Therefore, v = 9/5 m/s = 1.8 m/s. Thus, the speed of the shark after it swallows the fish is 1.8 m/s.
The speed of the shark after it has swallowed the 1-kg fish swimming toward it at 4 m/s is 3 m/s. This can be determined by conservation of momentum. Momentum is a vector quantity, meaning that the direction of the momentum must also be taken into account.
In this situation, the momentum of the shark before it swallows the fish is 5 kg⋅m/s due to its velocity of 1 m/s. After the shark has eaten the fish, the momentum is 6 kg⋅m/s due to the addition of the fish's momentum of 4 kg⋅m/s. Since momentum is conserved, the momentum of the shark after eating the fish is the same as the momentum of the shark before eating the fish. Since the mass of the shark does not change, the velocity must change to balance out the difference in momentum. This means that the velocity of the shark after eating the fish is 3 m/s.
For more equations related to momentum.
https://brainly.com/question/30677308
#SPJ11
how do air masses contribute to the formation of air fronts?
Air masses contribute to the formation of air fronts because air masses are large bodies of air that have similar characteristics in terms of temperature, humidity, and stability.
When two air masses with different characteristics come into contact, they form a boundary known as an air front. The characteristics of the two air masses determine the type of air front that forms.
There are four types of air fronts: cold fronts, warm fronts, stationary fronts, and occluded fronts.
Cold fronts occur when a cold air mass displaces a warm air mass, causing the warm air to rise and cool, which leads to cloud formation and precipitation. Warm fronts occur when a warm air mass displaces a cold air mass, causing the warm air to rise gradually over the cold air, leading to gradual cloud formation and precipitation. Stationary fronts occur when two air masses with different characteristics meet but do not move, leading to prolonged periods of precipitation. Occluded fronts occur when a cold front overtakes a warm front and lifts the warm air mass off the ground, leading to cloud formation and precipitation.Air masses play a significant role in the formation of air fronts because they determine the characteristics of the air mass that will form at the boundary between the two air masses. This, in turn, determines the type of air front that will form and the type of weather that will result. For example, a cold, dry air mass coming into contact with a warm, moist air mass will likely result in a cold front and a period of heavy precipitation.
To learn more about Air masses, visit: https://brainly.com/question/19626802
#SPJ11
old faithful geyser in yellowstone national park shoots water every hour to a height of 40.0 m. with what velocity does the water leave the ground?
The velocity with which the water leaves the ground is 28.0 m/s (downward).
The Old Faithful Geyser in Yellowstone National Park shoots water every hour to a height of 40.0 meters.
To find the velocity with which the water leaves the ground, we can use the following kinematic equation:
v² = u² + 2as
Here,
v = final velocity
u = initial velocity
a = acceleration due to gravity
s = distance traveled by the object
The initial velocity of the water when it leaves the ground is 0 m/s.
Also, we can assume the final velocity of the water when it reaches the maximum height to be 0 m/s.
We know that the acceleration due to gravity is -9.8 m/s² (negative due to the direction).
The distance traveled by the water is the height to which it rises, i.e., 40.0 meters.
Using the above values in the kinematic equation, we get:
v² = 0² + 2*(-9.8)*40.0v² = -784v = √(-784)
Since the answer is coming out to be negative, it indicates that the velocity is in the downward direction.
So, the velocity with which the water leaves the ground is 28.0 m/s (downward).
To know more about velocity, refer here:
https://brainly.com/question/30559316#
#SPJ11