An object falling from 50m will have
potential than an object falling from 30m
:Equal
:Lower
:Greater
:Less

Answer: Force

In physical science, a force is something that acts on an object by pushing or pulling it. If the force is strong enough, it changes the position or shape of the object. Forces such as friction, air resistance and simple physical contact touch the object directly, while forces like gravity, magnetism and electrostatics act on the object from a distance. Force is a vector quantity, meaning you can measure both its strength and its direction. The formula to find the measure of a force is force = mass times acceleration, written as f = ma.

Velocity

The faster something is moving, the higher its velocity.

When an object is moving, one way to measure how fast it is moving is by finding its velocity, which is the rate at which it is changing position. Like force, velocity is a vector quantity, so it includes direction. To find the average velocity of an object, divide the change in its position by the time the movement took, and state its direction. For example, if a car is driving north and in one hour's time it travels 30 miles, its velocity is 30 miles per hour, north.

\_:Peepato1234:_/

Answer: B. when the source moves toward you

Explanation:

Microwaves are referred to as the electromagnetic waves that are used in broadcasting and telecommunications. The waves increase in frequency when the source moves toward someone.

It should be noted that as the wavelength increases in size, then the frequency and the energy will decrease. As the frequency increases, then the wavelength will get shorter and vice versa.

Therefore, the correct option is B.

Answer:

The racetrack is 996.7 meters long

Explanation:

Convert 251km/h to km/s (kilometers per second)

3600 seconds in an hour, so:

251/3600 = 0.0697km/s

Convert km/s to m/s (meters per second)

1000 meters in a kilometer, so:

0.0697*1000 = 69.7m/s

Find length of racetrack:

69.7m/s*14.3s = 996.7m

If the racer travels 69.7 meters in one second and it takes 14.3 seconds to complete a lap, the racetrack is 996.7 meters long.

No, the object will not experience any force of friction because there is no air or other medium in the tube to create friction against the object.

This is because friction is only possible when two objects are in contact with each other, or when an object is in contact with a medium like air or water. Since there is no air or other medium in the tube, there is nothing for the object to interact with. As a result, the object will fall through the tube without any external forces acting on it, such as friction. The motion of the object will be completely determined by the force of gravity and the object's inertia, and no other external forces will be present.

To know more about friction refer to the link  brainly.com/question/13000653

#SPJ4

The 70% Hydrogen, 28% Helium, 2% heavier elements. the interstellar medium in our region of the Milky Way consists of

What is interstellar?

Interstellar is a 2014 science fiction film directed, co-written, and co-produced by Christopher Nolan. The movie follows a team of astronauts who travel through a wormhole in search of a new home for humanity.

The cast includes Matthew McConaughey, Anne Hathaway, Jessica Chastain, and Michael Caine. The film was a major commercial success, grossing over $677 million worldwide, and was nominated for five Academy Awards. Interstellar has been praised for its realistic depiction of space exploration, its innovative visual effects, and its emotional story.

The interstellar medium in our region of the Milky Way is composed of mostly hydrogen (about 70%) and helium (about 28%), with the remaining 2% consisting of heavier elements, such as carbon, nitrogen, oxygen, and dust.

To learn about more interstellar

https://brainly.com/question/12497791

#SPJ4

The gravitational force here between spheres has an estimated magnitude of 1.67 10-9 N.

Any two bodies' gravitational attraction is exactly equal to the sum of their masses and divided by the square of their distance from one another.

Gravity, often known as the gravity force will bring any two bodies together. Although everything in the cosmos is attracted to one another, this attraction is usually too weak to just be felt since the things are so far apart. Gravity's attraction lessens as things are moved farther apart, but its influence sphere is boundless.

F=GMm/r^2

G=6.67 x 10^-11N kg^2/m^2

M=(15kg)

m=15 kg

r=(3.0m)^2

putting values we have

(6.67 x 10^-11N kg^2/m^2)(15kg)(15kg)/(3.0m)^2

1.67 x 10^-9N

Learn more about Gravitational Force from given link

https:/brainly.com/question/24783651

#SPJ4

Answer:

gravity and weight of an item

Explanation:

if you drop a rock it would fall straight to the ground

now if you drop a feather it would fall to the ground but will take a longer amount of time

The mass of the bouquet can be calculated using the equation m = F/a. Which is equal to 0.9kg.

Since van Gennip’s speed dropped from 10.8 m/s to 10.01 m/s after she took the bouquet, this indicates that a force was applied to her causing her to slow down.

The applied force can be determined by taking the difference between her final and initial momentum, which is p = mv.

Thus, the applied force can be calculated by F = Δp/Δt.

Plugging in the given values, the mass of the bouquet can be calculated as

m = F/a = (63.0 kg × (10.8 m/s - 10.01 m/s))/10.01 m/s² = 0.9 kg.

Therefore, the mass of the bouquet is 0.9 kg.

Learn more about mass:

https://brainly.com/question/28021242

#SPJ4

Answer:

Dark colors absorb more radiated heat from the sunlight while lighter colors reflect it. That's why wearing a black shirt on a sunny day makes you feel so much hotter than when you're wearing a white shirt!

Answer:

black

Explanation:

Light energy can be converted into heat energy. A black object absorbs all wavelengths of light and converts them into heat, so the object gets warm

The value of moment of Inertia of the solid cylinder will be 0.19 kg/m^2

Any item that can be rotated has the property of rotational inertia. It is a scalar value that indicates how challenging it is to alter an object's rotational velocity around a certain rotational axis. The role of mass in linear mechanics is analogous to that of rotational inertia in rotational mechanics.

The formula I = 1/2 [M (R_2^2 + R_1^2)] may be used to calculate the moment of inertia of a hollow cylinder revolving along an axis passing through the centre of the cylinder. The cylinder in this instance will have a mass of M and internal and exterior radii R1 and R2, respectively.

The cylinder's moment of inertia about its axis is (MR^2)/2.

Where, M - mass of object, R = radius of the cylinder.

After putting all the values. we will get,

[tex]=\frac{27 \mathrm{~kg} \cdot(0.24 \mathrm{~m} / 2)^2}{2} \approx 0.19 \mathrm{~kg} \cdot \mathrm{m}^2[/tex]

For more such questions on moment of Inertia of the solid cylinder

https://brainly.com/question/27380063

#SPJ4

The magnitude of the force assuming the force and the displacement of the mass is parallel​ is 10 N.

An agent with the ability to change a body's resting or moving condition is known as an external force. It has a magnitude and a direction. The place where force is applied is called the application, and the direction in which it is applied is called the direction of the force.

The Force can be computed using a spring balance. The SI unit of force is Newton (N).

Displacement is the change in the location of an object independent of the direction it is traveling. Displacement is a vector quantity since it takes into consideration both the magnitude and the direction of an object's motion. As a vector quantity, displacement can have a positive, negative, or zero value.

Given:

m = 3kg

distance = 7.5m

Velocity = 5m/s

Now, we can calculate the time

Velocity = displacement/time

Time t = 7.5/5

Time t = 1.5s

F = ma

[tex]F = 3*\frac{v}{t}[/tex]

[tex]F = 3*\frac{5}{1.5}[/tex]

F = 3×3.33

F = 9.99

F = 10N

To know more about force visit:

https://brainly.com/question/12785175

#SPJ1

The energy efficiency of converting the oil into the light can be calculated by multiplying the efficiencies of each step in the process.

Efficiency = (0.50) * (0.25) = 0.125 or 12.5%

So the energy efficiency of converting petroleum oil into the light is 12.5%. This means that only 12.5% of the energy in the oil is converted into usable light. The rest is lost as heat or other forms of energy during the process.

How effective is the process of turning oil into light overall? Chemical energy equivalent to 6,000 MJ is found in one barrel of crude oil. An oil-burning power plant can produce 2,000 MJ of energy from a single barrel of crude oil.

to know more about energy efficiency here:

brainly.com/question/28939461

#SPJ4

Answer:

48gk

Explanation:

Answer:

Here you go..

hope it helps..!

Explanation:

So since the gravitational force is directly proportional to the mass of both interacting objects, more massive objects will attract each other with a greater gravitational force, so as the mass of either object increases, the force of gravitational attraction between them also increases.

Answer:

sorry

Explanation:

Answer:

your answer will be 320kg that would be the pressure at the bottom surface of the block

The margin of error is 3.96.

The value of e, or the margin of error, can be calculated using the formula:

e = z*(s/√n)

where:

z = the critical value from a standard normal distribution table (for c = 0.99, z = 2.576)

s = the sample standard deviation (in this case, s = 2.6)

n = the sample size (in this case, n = 16)

So, to find the margin of error for this scenario, we plug the given values into the formula:

e = 2.576*(2.6/√16) = 2.576*(2.6/4) = 2.576*0.65 = 3.96

Therefore, the margin of error is 3.96.

It's worth noting that this value represents the range within which we expect the true population value to fall with a certain level of confidence

Read more about Margin of Error:

https://brainly.com/question/13990500

#SPJ4

A circuit with a series connection between a resistor and a capacitor.

To learn more about capacitor refer to:

https://brainly.com/question/21851402

#SPJ4

The tension is the only force exerted horizontally to the car.And according to Newton's Law, F = ma = 1210kg * 1.20m/s = 1452N.So T =1452N.

It just seems slick, almost like touching ice but without the frigid sensation, according to my firsthand experience of both. Sorry, it's really nothing exceptional. Any surface would be sufficient if it had some lubrication oil on it.

In reality, there are no frictionless planes. If they did exist, items on them would almost certainly behave exactly as Galileo predicted if they did. Despite not existing, they are extremely valuable for designing things like engines, motors, roads, and even tow truck beds, to mention a few.

To know more about frictionless surfaces visit:

brainly.com/question/434969

#SPJ4

Using the strain energy that the pole has stored in it, the running athlete's kinetic energy is transformed into the potential energy needed to jump.

Males employ the formula: h= 0.60 * [male height] + 12(v2/g), whereas females use h= 0.55 * [female height] + 12(v2/g).

It is merely an instance of energy being exchanged. If an athlete can run at 10 m/s and we calculate g as 10 m/s/s, the height equals 5 m.

Each vaulter has three tries to clear a particular height during a competition. In order to fall readily if touched, a bar is supported by two uprights. Up until a winner is determined through the process of elimination, it is raised gradually.

There has been a failed trial. A competitor's pole breaking while trying to clear the bar is not considered a trial or failure. No one is permitted to touch the vaulting pole.

To learn more about pole refer to:

https://brainly.com/question/3506806

#SPJ4

The resistor that is equivalent to the resistance of the circuit is 1 2/7 Ohms

The equivalent resistance of a circuit is the (single) resistance that can replace the combination of resistances in the circuit such that the current flowing in the circuit remains the same.

Please find attached the drawing of the circuit, created with an online circuit building tool.

Whereby the capacitor also acts as a resistor of 6 Ohms, we get;

Resistors R₄, R₅, and R₆ are parallel

The resistor equivalent to the three resistors is found as follows;

Req₁ =  1/(1/R₄ + 1/R₅ + 1/R₆)

Therefore, Req₁ = (1/(1/2 + 1/1 + 1/6)) = 0.6

Req₁ is in series with R₁, therefore;

Req₂ = Req₁ + R₁ = 0.6 + 3 = 3.6

Req₂, (Req₁ + R₁  combined) is parallel to R₂ and R₃, therefore;

Req₃ = 1/(1/Req₂ + 1/R₂ + 1/R₃)

Req₃ = 1/(1/3.6 + 1/3 + 1/6) = 9/7 = 1 2/7

The equivalent resistor of the circuit is 1 2/7 ohms

Learn more on the equivalent resistance of a circuit here: https://brainly.com/question/1437443

#SPJ1

Lever arm length and force applied perpendicular to a lever arm are multiplied to create torque. A scalar quantity called torque has two possible directions: clockwise and counterclockwise.

A force applied perpendicular to a lever arm produces a torque, which is the result. The distance that runs perpendicularly from the pivot point, or the center of rotation, to the location where the force is delivered, is known as the lever arm or moment arm. A pivot point is always used to define a torque.

Each gearing stage of a torque multiplier amplifies the torque applied to the bolt. For instance, a torque multiplier with a 5:1 ratio will produce an output at the shaft that is five times the torque, but because no energy can be produced, the speed will only be one fifth of the original.

To know more about torque visit:-

https://brainly.com/question/14970645

#SPJ4

The work done to launch the motion of both the hammer and the bullet are 3.1×10³ Joule and 2.2×10² Joules respectively.

As we know,

Work = Kinetic Energy

         = (0.5)(mv^2)

For Work in Joules, the mass is in units of Kg, and the velocity is in units of m/s.

KE(hammer) = 1/2mv^2 = 1/2 x 7.3 x (29)^2 = 3.1 x 10^3 J

and KE(bullet) = 1/2mv^2 = 1/2 x 2.6 x 10^-3 x (410)^2 = 2.2 x 10^2 J

To solve this problem, we must assume that energy is conserved. (This isn't stated in the problem, and is not true in general in these real-world examples, however we must assume conservation of energy in order to solve the problem with the information given).

When an object moves while a force is being exerted on it, then work is being done on the object by the force. If an object moves through a displacement d while a constant force F is acting on it, the force does an amount of work equal to W = F · d = F d cos φ where φ is the angle between d and F.

To know more about work done here

https://brainly.com/question/22116319

#SPJ4

Answer: 53125joules

Explanation: The formula for kinetic energy is 1/2mv^2.

So we would have

1/2[(170)(25x25)]=53125

The required average velocity vector for the trip is calculated to be 100 i + 200 j and its magnitude is 223.6 km/h.

The displacement due east is taken as 150 i.

The displacement due south is taken as 300 j.

The net displacement is given as, 150 i + 300 j.

Magnitude of net displacement = √(150² + 300²) = √112500 = 335.41 km

We get the average velocity by dividing the displacement vector by total time.

v avg = (150 i + 300 j)/1.5 = 100 i + 200 j

Magnitude of net velocity = √(100² + 200²) = √(10000 + 40000) = 223.6 km/h

Thus, the average velocity vector is 100 i + 200 j.

To know more about average velocity:

https://brainly.com/question/13490241

#SPJ4

A dedicated PV system circuit breaker, suitable for backfeed and positioned at the opposite end of the bus from the main circuit breaker, is a requirement of NEC 705.12(B).

A completed circular conduit through which electricity flows is known as a circuit in electronics. A simple circuit includes a current provider, conductors, and a load. The term "circuit" can broadly be used to describe any ongoing path via which electricity, information, or a signal might go.

A channel for the transfer of electric current is known as an electric circuit. Electric energy is transferred to components that transform it into various types of energy that can perform work, such as supplying power to light, appliances, and other devices, when electrical current flows across a circuit.

To know more about Circuit visit :

brainly.com/question/27206933

#SPJ4

Accenture can assist its clients in being more sustainable thanks to the myNav. By making it easier to create cloud solutions that lower carbon emissions by rearranging manufacturing facilities such that carbon emissions can be calculated with ease.

by establishing new corporate efforts to lower transportation expenses and by establishing new rules for the disposal of out-of-date technology.

​reduces the expense of transportation

establishes sustainable guidelines for disposing of outdated technology.

myNav Green Cloud Advisor assists businesses in developing cloud solutions that cut carbon emissions and create a platform for ethical innovation. Green Cloud Advisor starts by establishing a baseline for the energy usage, compute needs, and sustainability objectives of current data centers.

To learn more about myNav Accenture from given link

https://brainly.com/question/30090589

#SPJ4

When Justine is ice-skating, her final velocity if she accelerates at a rate of 2.0 m/s² for 3. 5 seconds is 7 m/s and it would take Jesse 5.4 seconds to stop the bicycle moving at an initial velocity of 13.5 m/s by accelerating at -2.50 m/s².

To find Justine's final velocity, we can use the equation:

v = u + at

where v is the final velocity, u is the initial velocity (which is assumed to be 0 in this case), a is the acceleration, and t is the time. So

v = 0 + (2.0 m/s²) × (3.5 s) = 7.0 m/s

To find the time it would take for Jesse to bring his bicycle to a stop, we can use the equation:

v = u + at

where v is the final velocity (which is assumed to be 0 m/s in this case as bicycle is brought to a stop), u is the initial velocity, a is the acceleration, and t is the time.

Given that a = -2.5 m/s² (negative sign indicates deceleration) and u = 13.5 m/s.

so t = (v - u) / a = (0 - 13.5 m/s) / -2.5 m/s² = 5.4 seconds

It would take Jesse 5.4 seconds to bring his bicycle to a complete stop.

To know more on equations of motion

https://brainly.com/question/20381052

#SPJ4

Answer:

0.45

Explanation:

Answer:

Explanation:

The answer is C.

For extra credit, you can point out that even at C, the spring force is not exactly zero as there is a tension force equal to the weight of the mass.