Answer:
Blue Jeans (are) blue light,
so that we see them as the color
A bat is using echolocation in a cave that is 15. 5 degrees Celsius.
a. What is the speed of sound in the cave?
b. If one of the cave walls was 25m away from the bat, how long would it take for the sound’s echo to return to the bat?
The speed of sound in air at 15.5°C is approximately 340.3 m/s. Using this value, we can calculate the time it takes for the sound's echo to return to the bat from a distance of 25m, which is approximately 0.147 seconds.
a. The speed of sound in air depends on temperature, pressure, and humidity. At 15.5°C, the speed of sound in air is approximately 340.3 m/s. This value is an approximation since the speed of sound can vary based on other factors such as humidity and atmospheric pressure.
b. To calculate the time it takes for the sound's echo to return to the bat, we can use the formula: time = distance/speed. The distance between the bat and the cave wall is given as 25m.
The sound travels from the bat to the wall and back to the bat, so the total distance traveled by the sound is 2*25m = 50m. Using the speed of sound in air, we can calculate the time it takes for the sound to travel this distance:
time = distance / speed
time = 50m / 340.3 m/s = 0.147 seconds
Therefore, it takes approximately 0.147 seconds for the sound's echo to return to the bat.
In summary, the speed of sound in air at 15.5°C is approximately 340.3 m/s. Using this value, we can calculate the time it takes for the sound's echo to return to the bat from a distance of 25m, which is approximately 0.147 seconds.
To know more about speed refer here:
https://brainly.com/question/28060745#
#SPJ11
Explain how brownian motion provides evdience that air is made of small particles
a guitar string of length 30 cm and stretched under a tension of 78 n has a certain fundamental frequency. how long would a pipe, open at both ends, need to be to play the same fundamental frequency? a 15-cm long piece of the guitar string has a mass of 0.4 g. the speed of sound in air is 340 m/s.
The length of the pipe needed to play the same fundamental frequency as the guitar string is 86.7 cm.
To find the length of the pipe needed to play the same fundamental frequency as the guitar string, we need to use the formula:
f = (n/2L) * v
Where f is the fundamental frequency, L is the length of the pipe, n is the harmonic number (for the fundamental frequency, n=1), and v is the speed of sound in air.
First, we need to find the fundamental frequency of the guitar string. We can use the formula:
f = (1/2L) * √(T/m)
Where T is the tension in the string, m is the mass per unit length of the string, and L is the length of the string.
Using the given values, we can calculate the fundamental frequency of the guitar string as:
f = (1/2*0.3) * √(78/0.004) = 196.14 Hz
Now we can use this frequency and the speed of sound in air to find the length of the pipe needed to play the same frequency:
196.14 = (1/2L) * 340
Solving for L, we get:
L = (1/2) * 340 / 196.14 = 0.867 meters or 86.7 cm
To learn more about string click on,
https://brainly.com/question/29360985
#SPJ4
His is an artist's model of the solar system. The scale bar in the drawing represents AU s. One AU is the distance rom the Sun to the Earth, which is about 93 million miles or 150 million kilometers. Is this an accurate scale model? Explain A) No. If Earth is 1 AU away from the Sun, Neptune should be about 30 AU'S away. It is not B) Yes, it is an accurate scale model showing the relative distances of each planet from the Sun. C Yes the drawing is to scale. The artist shows how the diameters compare as well as the distances from the Sun in AU's. Neither the distances from the Sun or the size of the planets are drawn to scale. Both are too small according to actual distances and diameters,
Yes, the drawing is to scale an accurate scale model. The artist shows how the diameters compare as well as the distances from the Sun in AU's. The correct answer is C) Yes, the drawing is to scale.
The artist shows how the diameters compare as well as the distances from the Sun in AU's. However, it is important to note that neither the distances from the Sun nor the size of the planets are drawn to scale. Both are too small according to actual distances and diameters.
Overall, the model accurately represents the relative distances of each planet from the Sun, but it is not an accurate representation of the actual distances and sizes of the planets in our solar system. Since the model uses AU's to represent distances between the planets and the Sun, it provides an accurate representation of the relative distances within the solar system. The correct answer is C) Yes, the drawing is to scale.
For more about scale model:
https://brainly.com/question/19512201
#SPJ11
A body is given an initial velocity of 40m/s at a point P . The body decelerates uniformly and attains a velocity of 20m/s at a point X.The body is finally brought to rest at a point M. If the time taken by the body through the whole journey is 20s and the distance covered from P to X it's 200m, calculate i)the deceleration of the body ii)distance between X and M iii)time taken by the body to move from X to M
The deceleration of the body is -1 m/s^2, the distance between X and M is 200m, and the time taken by the body to move from X to M is 20 seconds.
Kinematic equations are a set of mathematical equations used to describe the motion of an object in terms of its displacement, velocity, and acceleration, given certain initial conditions.
To solve this problem, we can use the following kinematic equations of motion:
v = u + at
s = ut + (1/2)at^2
v^2 = u^2 + 2as
Where:
u = initial velocity
v = final velocity
a = acceleration or deceleration
t = time taken
s = distance covered
i) To find the deceleration of the body:
From the first equation, we have:
v = u + at
20 = 40 + a(20)
a = (20-40)/20 = -1 m/s^2
Therefore, the deceleration of the body is -1 m/s^2.
ii) To find the distance between X and M:
We know that the total distance covered from P to M is:
s = 200m + distance between X and M
When the body is at rest at point M, we can use the third equation:
v^2 = u^2 + 2as
Since the body is brought to rest, the final velocity is zero:
0 = 20^2 + 2(-1)s
s = 200 m
Therefore, the distance between X and M is 200m.
iii) To find the time taken by the body to move from X to M:
From the second equation, we have:
s = ut + (1/2)at^2
Since the initial velocity is 20m/s and the final velocity is zero, we have:
s = (1/2)at^2
200 = (1/2)(-1)t^2
t^2 = 400
t = 20 seconds
So, the time taken by the body to move from X to M is 20 seconds.
Therefore, 200 meters separate X and M, the body is decelerating at -1 m/s^2, and it takes the body 20 seconds to get from X to M.
To learn more about Newton's law of motion click:
brainly.com/question/29775827
#SPJ1
1kg of water will occupy minimum space at
A) 0°C
B) 100°C
C) -4°C
D) 4°C
Answer and Explanation:
According to the principle of maximum density, water has its highest density at 4°C. This means that 1kg of water will occupy minimum space at a temperature of 4°C. At this temperature, the volume of water is at its lowest, and any further cooling or heating will cause it to expand.
This principle is due to the unique properties of water molecules. As the temperature decreases from room temperature, the molecules begin to slow down and move closer together. However, below 4°C, hydrogen bonding between the molecules begins to dominate, causing them to form a crystal-like structure and expand.
At 0°C, water freezes and expands by about 9%, making it less dense than liquid water. At 100°C, water boils and turns into steam, which occupies much more space than liquid water. At -4°C, the water is still in a liquid state but is not at its maximum density.
In conclusion, the correct answer is 4°C, as this is the temperature at which 1kg of water will occupy minimum space.
1 kg of water will occupy minimum space of 1 m³at 25°C.
What is Density ?Density is the ratio of mass to volume. it tells how much mass a body is having for its unit volume. for example egg yolk has 1027kg/m³ of density, means if we collect numbers of egg yolk and keep it in a container having volume 1 m³ then total amount of mass it is having will be 1027kg. Density is a scalar quantity. when we add egg yolk into the water, egg yolk has greater density than water( 997 kg/m³), because of higher density of egg yolk it contains higher mass in same volume as water. hence due to higher mass higher gravitational force is acting on the egg yolk therefore it goes down on the inside the water. water will float upon the egg yolk. same situation we have seen when we spread oil in the water. ( in that case water has higher density than oil. that's why oil floats on the water)
To know more about Density :
https://brainly.com/question/29775886
#SPJ2.
Estimate how the phase difference would change when the value of ω changes from zero to infinity in the circuit
Without a specific circuit provided, it is difficult to estimate how the phase difference would change when the value of ω changes from zero to infinity.
The phase difference is dependent on the specific circuit components and their respective impedances.
In general, the phase difference between voltage and current in a circuit with inductive or capacitive elements can change significantly as the frequency (or angular frequency ω) changes.
For example, in a simple series circuit consisting of a resistor and an inductor, the phase difference between the voltage and current is zero at DC (ω=0) and approaches 90 degrees as ω approaches infinity.
In contrast, for a series circuit with a resistor and capacitor, the phase difference starts at 90 degrees at DC and approaches zero as ω approaches infinity.
Therefore, it is important to analyze the specific circuit and its components to determine how the phase difference would change as ω changes from zero to infinity.
To know more about phase difference refer here
brainly.com/question/14594671#
#SPJ11
______ solar involve(s) using light and infrared energy from the Sun entering a space through glass windows with no moving parts and no use of electrical energy
Passive solar energy involves using natural processes to capture and distribute the Sun's energy.
This technique utilizes building design features, such as window placement and materials, to allow sunlight to enter the space and provide heating, lighting, and ventilation without any need for mechanical or electrical systems.
One example of passive solar design is the use of south-facing windows to capture sunlight during the winter, while shading devices prevent overheating during the summer.
By reducing the need for artificial heating and cooling, passive solar energy can reduce energy costs and environmental impact while providing a comfortable and sustainable living or working space.
To know more about solar energy, refer here:
https://brainly.com/question/9704099#
#SPJ11
A spaceship measures bright flashes of light from a distant star. The spacecraft now heads toward the star at 0. 90c.
From the spacecraft's point of view, at what speed do the pulses approach? Express your answer with the appropriate units
According to the theory of special relativity, the speed of light is constant in all inertial frames of reference. Therefore, the speed of the pulses of light measured by the spaceship will be the same as the speed of light, c.
However, since the spaceship is moving towards the distant star at 0.90c, the relative speed of the spaceship with respect to the pulses of light will be c - 0.90c = 0.10c. This means that the pulses of light will approach the spaceship at a speed of 0.10c.
To understand this concept more clearly, imagine you are standing still and someone throws a ball towards you at 10 mph. The relative speed of the ball with respect to you is 10 mph. Now, if you start walking towards the ball at 5 mph, the relative speed of the ball with respect to you will be 10 mph - 5 mph = 5 mph. Similarly, in the case of the spaceship, the relative speed of the pulses of light with respect to the spaceship will decrease as the spaceship moves towards the source of the light.
In conclusion, the pulses of light will approach the spaceship at a speed of 0.10c from the spaceship's point of view. This concept is important in understanding the effects of relative motion on the measurement of physical phenomena, and it has implications for our understanding of the nature of space and time.
To know more about special relativity refer here
https://brainly.com/question/12717449#
#SPJ11
As the color of light changes from red to yellow, the
frequency of the light
Answer:
As the color of light changes from red to yellow, the frequency of the light increases.
Explanation:
Red light has the longest wavelength and the lowest frequency among visible light, while yellow light has a shorter wavelength and a higher frequency.
The relationship between the frequency and the wavelength of light is given by the equation:
c = λν
where c is the speed of light, λ is the wavelength of light, and ν is the frequency of light.
Since the speed of light is constant in a vacuum, if the wavelength of light decreases as the color changes from red to yellow, then the frequency must increase. This means that yellow light has a higher frequency than red light.
3. A slinky has a spring constant of 160 N/m. How much work is done on the slinky
to stretch it 0. 50 meters horizontally across a table?
The work done on the slinky to stretch it 0.50 meters horizontally across a table is 20 J.
The work done on a spring is given by the equation W = (1/2)[tex]kx^{2}[/tex], where W is the work done, k is the spring constant, and x is the distance stretched. Substituting the given values, we get: W = (1/2)(160 N/m)[tex](0.50m)^{2}[/tex], W = 20 J
Therefore, the work done on the slinky to stretch it 0.50 meters horizontally across a table is 20 J.
The work done is equal to the energy stored in the spring as potential energy due to its deformation.
When the slinky is stretched, the work done on it is stored as potential energy in the spring, which can be converted back to work when the spring is released.
To know more about potential energy, refer here:
https://brainly.com/question/24284560#
#SPJ11
A 15 kg box is moving to the right while being pushed down and to the left as shown in the picture. Force Push is 100 N and = 40°. The coefficient of static friction µS = 0.6 and the coefficient of kinetic friction µK = 0.5
What is the magnitude of Force Normal?
What is the magnitude of Force Friction?
What is the acceleration rate of the box in the x direction?
The magnitude of the normal force is 147 N.
The magnitude of Force Friction is 73.5 N.
The acceleration of the box is 0.21 m/s².
What is the magnitude of Force Normal?The magnitude of the normal force is calculated as follows;
Fn = mg
where;
m is the massg is acceleration due to gravityFn = 15 kg x 9.8 m/s²
Fn = 147 N
The magnitude of Force Friction is calculated as follows;
Ff = μFn
Ff = 0.5 x 147 N
Ff = 73.5 N
The acceleration of the box is calculated as follows;
F - Ff = ma
a = (F - ff)/m
a = (100 x cos40 - 73.5 ) / 15
a = 0.21 m/s²
Learn more about normal force here: https://brainly.com/question/14486416
#SPJ1
When you added 50 V battery to circuit what happens to the
intensity of light bulbs? increase or decrease
Adding a 50 V battery to a circuit can potentially increase the intensity of the light bulbs, assuming the bulbs are designed to operate at a higher voltage.
The intensity of light bulbs is generally related to the power (P) consumed by the bulbs. In an electrical circuit, the power can be calculated using the formula:
P = V² / R
Where V is the voltage and R is the resistance of the bulb.
By increasing the voltage (V), the power consumed by the bulbs may increase if the resistance (R) remains constant. A higher power output generally results in increased brightness and intensity of the light bulbs.
However, it's important to note that if the light bulbs are not designed to handle the increased voltage, it could lead to overloading and potential damage.
Therefore, it is crucial to ensure that the light bulbs are compatible with the increased voltage before making any modifications to the circuit.
To know more about intensity refer here
https://brainly.com/question/17583145#
#SPJ11
What is the best way for someone to identify a suitable career?
1.brainstorm a list of things that person likes to do and things they are good at and find the "common denominator"
2.rely on the advice of someone you trust, such as a parent or friend
3.pick one that is popular, prestigious and pays well
4.take an aptitude test and use the results to make a decision
The best way for someone to identify a suitable career is a subjective matter and can vary from person to person. However, a common approach involves a combination of self-reflection, exploration, and research. Some recommended steps to identify a suitable career include:
1. Self-reflection: Brainstorm a list of things you enjoy doing and are passionate about. Consider your interests, hobbies, skills, and values. Think about what brings you satisfaction and a sense of fulfillment.
2. Skills assessment: Identify your strengths and areas where you excel. Assess your natural abilities, talents, and acquired skills. Determine what tasks or activities you perform well and enjoy doing.
3. Exploration and research: Explore different career options that align with your interests and skills. Research various industries, job roles, and career paths. Gather information about job responsibilities, required qualifications, growth prospects, and work-life balance.
4. Gain experience: Seek opportunities to gain hands-on experience in fields or roles you are considering. This can be through internships, part-time jobs, volunteering, or shadowing professionals. Practical experience can help you gain insight into the day-to-day realities of different careers.
5. Networking and informational interviews: Connect with professionals working in fields of interest. Conduct informational interviews to learn more about their career paths, experiences, and advice. Networking can provide valuable insights and potential opportunities.
6. Professional aptitude tests: Consider taking aptitude tests or career assessments that evaluate your strengths, interests, and personality traits. These tests can provide additional guidance and suggestions for suitable career paths. However, remember that they should be used as a tool and not as the sole decision-making factor.
It is important to note that selecting a suitable career is a personal decision, and what works for one person may not work for another. It's essential to consider your individual aspirations, values, and long-term goals when making career choices.
Seek advice from trusted mentors or career counselors who can provide guidance based on your specific circumstances and help you make an informed decision.
To know more about career refer here
https://brainly.com/question/8825832#
#SPJ11
(a)(i) A galaxy moves away from the Earth at a speed of 3.9 × 104 km/s.
The speed of light is 3.0 × 105 km/s.
Light from the galaxy is emitted with a wavelength of 6.2 × 10−7 m.
Calculate the change in the wavelength of the light that is received by an observer on the Earth.
(ii) Calculate the wavelength of the light that is received by the observer on the Earth.
(b)One of the pieces of evidence for the Big Bang theory is the red-shift of galaxies. Explain how the red-shift of galaxies supports the Big Bang theory.
(a)(i) To calculate the change in wavelength of light received by an observer on the Earth, we can use the formula for redshift:
z = ∆λ/λ = v/c
where z is the redshift, ∆λ is the change in wavelength, λ is the original wavelength, v is the velocity of the galaxy, and c is the speed of light.
Substituting the given values, we get:
z = ∆λ/6.2 × 10−7 m = 3.9 × 104 km/s / 3.0 × 105 km/s
Solving for ∆λ, we get:
∆λ = λz = 6.2 × 10−7 m × 3.9 × 104 km/s / 3.0 × 105 km/s
∆λ = 8.06 × 10−11 m
Therefore, the change in the wavelength of the light received by an observer on Earth is 8.06 × 10−11 m.
(ii) The wavelength of the light that is received by the observer on Earth can be calculated using the formula:
λ' = λ + ∆λ
where λ' is the new wavelength and λ is the original wavelength.
Substituting the given values, we get:
λ' = 6.2 × 10−7 m + 8.06 × 10−11 m
λ' = 6.2008 × 10−7 m
Therefore, the wavelength of the light received by the observer on Earth is 6.2008 × 10−7 m.
(b) The redshift of galaxies supports the Big Bang theory in two ways:
1. According to the Big Bang theory, the universe is expanding. As the universe expands, galaxies move away from each other, and their light is redshifted. The greater the redshift, the faster the galaxy is moving away from us. The observation of redshift in distant galaxies provides evidence that the universe is indeed expanding.
2. The Big Bang theory predicts that the early universe was much denser and hotter than it is now. This high density and temperature would have caused the universe to emit a lot of radiation, including light. As the universe expanded, this radiation would have cooled and stretched, leading to a cosmic microwave background radiation that fills the universe. The observed spectrum of this radiation is consistent with the predictions of the Big Bang theory. The redshift of distant galaxies provides further evidence for the Big Bang theory, as it is consistent with the idea that the universe was much denser and hotter in the past.
A 1. 5 V battery is connected to a 1,000 μF capacitor in series with a 150 Ω resistor. A. What is the maximum current that flows through the resistor during charging? b. What is the maximum charge on the capacitor? c. How long does the capacitor take to reach a potential of 1. 0V?
The maximum current across the resistor is 0.01 amps.
The capacitor can hold a maximum charge of 1500 C.
It takes 0.15 seconds for the capacitor to reach.
a) The maximum current that flows through the resistor during charging can be calculated using the formula I = V/R, where V is the voltage of the battery and R is the resistance of the circuit. Therefore, I = 1.5V / 150Ω = 0.01 A.
b) The maximum charge on the capacitor can be calculated using the formula Q = CV, where C is the capacitance of the capacitor and V is the maximum voltage across the capacitor during charging. Therefore, Q = (1000 μF) * (1.5V) = 1500 μC.
c) The time it takes for the capacitor to reach a potential of 1.0V can be calculated using the formula t = RC, where R is the resistance of the circuit and C is the capacitance of the capacitor. Therefore, t = (150Ω) * (1000 μF) = 0.15 s.
To know more about the Capacitor, here
https://brainly.com/question/31064008
#SPJ4
What is an example of vertical motion in galileo description?
An example of vertical motion in Galileo description is dropping a feather and a rock from the same height.
What is Galileo description?Through his observations employing a telescope that he designed and built himself, Galileo arrived at the conclusion that the Sun was the center of our solar system, thereby rejecting the orthodox notion held then that Earth was at the universe's epicenter. The theory of heliocentrism forward by him incited opposition and consternation from Roman Catholic Church which firmly believed in geocentrism as being valid astronomy.
In one of his well-known experiments, Galileo proposed that a feather and rock would fall to earth equally fast because of gravity if we disregard air resistance. Comparable acceleration resulting from gravitational pull, with an approximate value of 9.8 meters per second squared (m/s^2) close to the Earth's surface, explains why both objects display identical conduct.
Learn about Galileo's description here https://brainly.com/question/840914
#SPJ1
Two narrow slits are 0. 12 mm apart. Light of wavelength 550 nm illuminates the slits, causing an interference pattern on a screen 1. 0 m away. Light from each slit travels to the m=1 maximum on the right side of the central maximum.
Part A) How much farther did the light from the left slit travel than the light from the right slit?
Express your answer in nanometers
To answer your question about the distance traveled by light from the left slit compared to the right slit, we can use the formula for constructive interference in a double-slit experiment.
The formula for the path difference is given by:
ΔL = m * λ
where ΔL is the path difference (the extra distance traveled by light from the left slit compared to the right slit), m is the order of the maximum (m=1 in this case), and λ is the wavelength of the light (550 nm).
Now, we can plug in the values:
ΔL = 1 * 550 nm
ΔL = 550 nm
So, the light from the left slit traveled 550 nm farther than the light from the right slit in reaching the m=1 maximum on the right side of the central maximum.
To know more about double-slit experiment refer here
https://brainly.com/question/28108126#
#SPJ11
It is best to say that efficient plumbing _______.
Efficient plumbing encompasses various features, technologies, and practices that contribute to water conservation, cost savings, environmental sustainability, and overall system performance.
Certainly! Here are some additional ways to describe efficient plumbing:
1. Saves water and energy: Efficient plumbing systems are designed to minimize water wastage and reduce energy consumption, leading to cost savings and environmental benefits.
2. Enhances water conservation: Efficient plumbing promotes water conservation by utilizing technologies such as low-flow fixtures, dual-flush toilets, and water-efficient appliances.
3. Reduces water bills: By reducing water consumption, efficient plumbing can lead to lower water bills for homeowners and businesses.
4. Prevents leaks and water damage: Properly installed and maintained efficient plumbing systems help prevent leaks and water damage, preserving the integrity of the building and reducing the risk of costly repairs.
5. Improves overall system performance: Efficient plumbing systems are designed to optimize water distribution and drainage, ensuring reliable and consistent performance throughout the building.
6. Supports sustainable practices: Efficient plumbing aligns with sustainable practices by reducing water usage and minimizing the environmental impact associated with water supply and wastewater treatment.
7. Enhances occupant comfort and convenience: Efficient plumbing provides reliable and consistent water supply, temperature control, and proper drainage, enhancing the comfort and convenience of occupants.
8. Meets regulatory requirements: Many building codes and regulations require the installation of efficient plumbing systems to meet water efficiency standards and promote sustainable practices.
To know more about energy refer here
https://brainly.com/question/1932868#
#SPJ11
How much force is required to pull a spring 0.412 m from its equilibrium position if
the spring constant is 2,441.5 n/m?
The force required to pull the spring 0.412 m from its equilibrium position is 1004.41 N.
The force required to pull a spring can be calculated using Hooke's law, which states that the force exerted by a spring is proportional to its displacement from its equilibrium position.
The formula for Hooke's law is F = -kx, where F is the force exerted, k is the spring constant, and x is the displacement from the equilibrium position.
Substituting the given values into the formula, we have: F = -kx, F = -(2441.5 N/m)(0.412 m), F = -1004.41 N
The negative sign indicates that the force is in the opposite direction of the displacement, meaning that the force is pulling the spring back towards its equilibrium position. Therefore, the force required to pull the spring 0.412 m from its equilibrium position is 1004.41 N.
To know more about Hooke's law, refer here:
https://brainly.com/question/29126957#
#SPJ11
A uniform plank AB of mass 20kg is supported horizontally at 20cm and 70cm marks from A the plank is in equilibrium when massese 50kg and 70kg are suspended at A and B respectively and the weight of 100N is suspended at the 40cm Mark from B
The equilibrium of the plank is maintained: when the net torque and net force are both equal to zero.
In this scenario, we have a uniform plank AB with a mass of 20 kg. It is supported horizontally at points 20 cm and 70 cm from point A. The plank is in equilibrium when additional masses of 50 kg and 70 kg are suspended at points A and B, respectively. Furthermore, a weight of 100 N is suspended at the 40 cm mark from point B.
To maintain equilibrium, the net torque and the net force on the plank must be zero. The torque produced by each mass and weight on the plank can be calculated as the product of the force and the distance from the pivot point. The force due to the mass of the plank and the suspended masses can be calculated using the formula F = mg, where m is the mass and g is the acceleration due to gravity (approximately 9.81 m/s^2).
The torque balance equation will involve the torques produced by the 20 kg plank, the 50 kg and 70 kg suspended masses, and the 100 N weight. By calculating these torques and setting the net torque to zero, we can analyze the equilibrium state of the plank. Additionally, we need to ensure that the net force acting on the plank is also zero, which can be confirmed by summing the forces due to each mass and weight and setting the total equal to zero.
In summary, the equilibrium of the plank is maintained when the net torque and net force are both equal to zero. This involves balancing the torques produced by the 20 kg plank, the 50 kg and 70 kg suspended masses, and the 100 N weight, as well as the forces acting on the plank.
To know more about net torque, refer here:
https://brainly.com/question/30284628#
#SPJ11
5. A bathroom heater uses 10. 5 A of current when connected to a 120. V potential difference. How much power does this heater dissipate?
· Remember to identify all data (givens and unknowns), list equations used, show all your work, and include units and the proper number of significant digits to receive full credit
The power dissipated by the bathroom heater is 1.26 kW or 1260 W.
Given data:
1. Current (I) = 10.5 A
2. Potential difference (V) = 120 V
Unknown:
1. Power (P)
Equation used: P = IV
Now, let's solve the problem step-by-step:
Step 1: Recall the formula for power, which is P = IV.
Step 2: Plug in the given values for current (I) and potential difference (V) into the equation.
P = (10.5 A) × (120 V)
Step 3: Perform the multiplication to calculate the power.
P = 1260 W
Step 4: Check the significant digits. Both given values have three significant digits, so our answer should also have three significant digits.
For more about power dissipated:
https://brainly.com/question/12803712
#SPJ11
How much current, in amperes, is in a lightning stroke that lasts 0. 05 second and transfers 100 coulombs
A lightning strike with a duration of 0.05 seconds and a 100-coulomb energy transfer has a current of 2000 amperes.
The amount of current, in amperes, in a lightning stroke that lasts 0.05 seconds and transfers 100 coulombs can be calculated using the formula I = Q/t, where I represents the current in amperes, Q represents the charge in coulombs, and t represents the time in seconds.
So, substituting the given values in the formula, we get:
I = 100 coulombs / 0.05 seconds
I = 2000 amperes
Therefore, the lightning stroke that lasts 0.05 seconds and transfers 100 coulombs has a current of 2000 amperes. It is important to note that lightning strikes can have varying currents, ranging from tens of thousands to hundreds of thousands of amperes, depending on the size and intensity of the storm. In fact, lightning is one of the most powerful natural phenomena on Earth, capable of generating enormous amounts of energy in just a few microseconds. As such, it is important to take appropriate safety precautions during a lightning storm to minimize the risk of injury or damage.
Know more about lightning here:
https://brainly.com/question/16854009
#SPJ11
If a rocket takes off from earth with a certain force what must be true about earth
If a rocket takes off from Earth with a certain force, there are several things that must be true about Earth to make this possible.
Firstly, Earth must have a gravitational field that attracts the rocket toward its center. This gravitational force pulls the rocket toward the ground, and the rocket must overcome it with a force greater than the force of gravity in order to take off.
Secondly, Earth's atmosphere must be present, as the rocket needs to push against the air molecules to create thrust and lift off the ground. Thirdly, Earth's surface must be firm enough to support the launch of the rocket, with a strong and stable launchpad to prevent any accidents.
Fourthly, Earth's rotational speed and position in its orbit around the Sun must also be taken into account, as this affects the required trajectory of the rocket for a successful launch. Overall, a combination of Earth's gravitational force, atmosphere, surface conditions, and position in its orbit all play a crucial role in enabling a rocket to take off from Earth.
To learn more about Rocket
https://brainly.com/question/15061209
#SPJ4
Explain how to calculate the distance to the epicenter of an earthquake:
step 1:
step 2:
step 3:
The distance to the epicenter of an earthquake can be calculated by measuring the S-P interval and using a travel-time graph. Data from multiple seismographs are used to triangulate the exact location of the epicenter.
To calculate the distance to the epicenter of an earthquake, the following steps can be followed:
Step 1: Determine the time interval between the arrival of the P-wave and S-wave. This time interval is called the "S-P interval" and can be measured using a seismograph.
Step 2: Use a travel-time graph, which plots the S-P interval against the distance to the epicenter, to find the distance to the epicenter. The graph provides a curve of expected S-P intervals for different distances. By measuring the S-P interval, we can determine the distance from the curve.
Step 3: Repeat the process using data from at least three different seismographs located at different locations to triangulate the exact location of the epicenter.
In summary, the distance to the epicenter of an earthquake can be calculated by measuring the S-P interval and using a travel-time graph to find the corresponding distance. This process is repeated using data from multiple seismographs to triangulate the exact location of the epicenter.
To know more about epicenter refer here:
https://brainly.com/question/28136716#
#SPJ11
If a bottle of oxygen with a pressure of 500 kPa with a volume of. 30 L at 290 K has a temperature change to 370 K and the volume changed to 1. 5 L because the bottle broke open and leaked into the bottles outer container, then what is the new Pressure of the oxygen?
Remember the combined gas law equation. P1V1 / T1 = P2V2 / T2
a
. 128 kPa
b
128 kPa
c
0 kPa
d
500 kPa Lp
The new pressure of the oxygen is 128 kPa. The correct answer is (a).
In the given problem, we are given the initial pressure, volume, and temperature of oxygen in a bottle and asked to find the new pressure of oxygen after the bottle breaks open and leaks into the outer container. We can use the combined gas law equation to find the new pressure of oxygen. The volume and temperature of the oxygen changes from 0.3 L and 290 K to 1.5 L and 370 K, respectively, while the amount and state of the oxygen remain constant. Using the combined gas law equation P₁V₁ / T₁ = P₂V₂ / T₂, we can find the new pressure of the oxygen:
P₂ = (P₁ x V₁ x T2) / (V₁ x T₁)
P₂ = (500 kPa x 0.30 L x 370 K) / (1.5 L x 290 K)
P₂ = 128 kPa
To know more about temperature, here
https://brainly.com/question/11464844
#SPJ4
Robert and his younger brother Jake decide to go fishing in a nearby lake. Just before they cast off, they are both sitting at the back of the boat and the bow of the boat is touching the pier. Robert notices that they have left the fishing bait on the pier and asks Jake to go get the bait. Jake has a mass of 59. 5 kg and an arm reach of 50. 0 cm, Robert has a mass of 87. 5 kg, and the boat has a mass of 83. 0 kg and is 2. 70 m long. Determine the distance the boat moves away from the pier as Jake walks to the front of th
Since the force is zero, the boat does not move. Therefore, the distance the boat moves away from the pier as Jake walks to the front of the boat is zero.
To solve this problem, we need to use the conservation of linear momentum.
The total mass of the boat and the two brothers is given by:
M = m_boat + m_brother_1 + m_brother_2
= 83.0 kg + 59.5 kg + 50.0 kg
= 192.5 kg
The total momentum of the system before Jake starts walking is given by:
P_total = m_boat * v_boat + m_brother_1 * v_brother_1 + m_brother_2 * v_brother_2
= (83.0 kg) * (v_boat) + (59.5 kg) * (0) + (50.0 kg) * (0)
= 83.0 kg * v_boat + 297.5 kg * 0
= 210.5 kg * v_boat
v_boat is the velocity of the boat, measured in the same direction as the displacement of the boat.
Since the boat is stationary initially, v_boat = 0.
Now, we can apply Newton's second law to the system. The force exerted on the boat by Jake, who is walking towards the front of the boat, is equal to the momentum of the boat relative to Jake. Since Jake is walking away from the pier, the momentum of the boat relative to Jake is negative. Therefore, we have:
F = P_relative - P_initial
= -210.5 kg * v_boat - 297.5 kg * 0
= -408.0 kg * 0
= 0 N
Learn more about force Visit: brainly.com/question/30236242
#SPJ4
Using a cable with a tension of 1350 n, a tow truck pulls a car 5.00 km along a horizontal roadway. (a) how much work does the cable do on the car if it pulls horizontally
The work done by the cable on the car is 67500 J.
To calculate the work done by the cable on the car, we need to use the formula for work, which is:
W = F * d
here W is the work done, So, F is the force applied, and here d is the displacement of the object being moved.
In this case, the force applied by the cable is given by the tension in the cable, which is 1350 N. The displacement of the car is given by the distance it is pulled along the roadway, which is 5.00 km.
We can use the formula for distance to calculate this displacement, which is:
d = 5.00 km
Substituting this value into the formula for work, we get:
W = 1350 N * 5.00 km
W = 67500 J
Therefore, the work done by the cable on the car is 67500 J.
Learn more about work Visit: brainly.com/question/25573309
#SPJ4
If you have a potential energy of 57 J. Now double your height, what is your new potential energy?
When you double your height, your new potential energy is 114 Joules.
How to find the new potential energy?The potential energy of an object depends on its height (h) and the force of gravity acting on it (usually denoted as "g"). The formula for gravitational potential energy is given by:
P = mgh
where P is the potential energy, m is the mass of the object, g is the acceleration due to gravity, and h is the height.
In this case, you have a potential energy of 57 J. Let's assume that the height (h) is constant, and we'll denote it as h1. So, we have:
P = mgh1 = 57 J
Now, you double your height, which means the new height is 2 times the original height (2h1). Let's denote the new height as h2. So, we have:
h2 = 2h1
Substituting this into the formula for potential energy, we get:
P = mgh2 = mg(2h1)
Since h2 = 2h1, we can rewrite the above expression as:
P = 2(mgh1)
But we know that PE1 = mgh1, so we can substitute this value into the equation:
PE2 = 2(PE1)
So, the new potential energy is:
P = 2*57J = 114J
Learn more about potential energy at:
https://brainly.com/question/14427111
#SPJ1
The author says “this is equivalent to taking a long shower every day for two-and- a half weeks” to
The author says "This is equivalent to taking a long shower every day for two-and-a-half weeks" to D. give the reader an example of how much water is wasted.
What is the use of water?The author is utilizing this corresponding to give the lecture on an idea of in what way or manner much water is needed to start a farm.
By equating it to right a long shower every day for two-and-a-half weeks, me is showing that offset a farm requires a meaningful amount of water, which is a valuable means that bear not be wasted. The contrasting also helps to stress the importance of water preservation and the need for tenable farming practices that use water capably.
Learn more about water from
https://brainly.com/question/1313076
#SPJ1
The author says "This is equivalent to taking a long shower every day for two-and-a-half weeks" to A. show the reader how much water is needed to start a farm. B. convince readers to give up taking long showers every day. C. inform the reader about how wonderful long showers are. D. give the reader an example of how much water is wasted.