Between an open air space and inside laboratory, which one has
more fungi and bacteria and why?

Answers

Answer 1

Both an open-air space and an inside laboratory can have varying amounts of fungi and bacteria present. However, an inside laboratory is typically more controlled and sterile, meaning that there are likely fewer fungi and bacteria present.

Comparison between indoor and outdoor environments

It's important to note that the specific microbial communities present in each environment can vary widely depending on a number of factors, and it's difficult to make a general comparison between indoor and outdoor environments without more specific information about the conditions present in each setting.

We can assume that an inside laboratory is typically more controlled and sterile, meaning that there are likely fewer fungi and bacteria present. In contrast, open-air space is exposed to a wider variety of environmental factors, such as wind, rain, and soil, which can introduce and spread different types of fungi and bacteria. Therefore, it is generally assumed that an open-air space has more fungi and bacteria present than an inside laboratory.

learn more about bacteria and fungi

https://brainly.com/question/24732903

#SPJ11


Related Questions

What does it mean when your food is "irradiated?" A. They have been in contact with nuclear waste B. The vegetables come from farms near nuclear power plants C. The food is treated to give it a longer shelf life D. All of the above

Answers

The correct answer is C. The food is treated to give it a longer shelf life. Irradiated food is treated with ionizing radiation to extend its shelf life.

Exposing food to controlled radiation kills dangerous germs and parasites.  Food is preserved.

Irradiation does not turn food radioactive or affect its nutrients. Irradiation preserves and makes food safer.



In conclusion, when your food is "irradiated," it means that it has been treated with ionizing radiation in order to give it a longer shelf life and make it safer to eat.

The correct answer to this question is C. The food is treated to give it a longer shelf life.

Read more about Irradiated food.

https://brainly.com/question/30003504

#SPJ11

how does heroin affect the function of the synapses

Answers

Answer:

Heroin strongly activates dopamine neurons, and only excites serotonin neurons at higher doses. Nicotine activates dopamine neurons in merely a few seconds, but produces minimal effects on serotonin neurons.

Explanation:

A katydid with the genotype
F/F∙b/b
is mated with
a
katydid that is
f/f∙B/B
. The
F 1
​ progeny from this cross are test crossed. Lower case is used to designate a recessive allele. What would be the genotype of the katydid used as the tester? a) F/f • b/b b) F/F • b/b c) f/f • b/b d) f/f • B/B e) F/F • B/B

Answers

Progeny from this cross are test crossed. Lower case is used to designate a recessive allele. The genotype of the katydid used as the tester would be e) F/F • B/B

The given genotypes are:F/F•b/b and f/f•B/B.F1 progeny: In order to determine the F1 progeny, we will cross the above-mentioned genotypes:F/F•b/b × f/f•B/B. This will result in the following possible gametes:F•b and f•BThe above-mentioned gametes will combine to form F1 progeny:F/f•B/b. The genotype of the katydid used as the tester:It can be determined from the F1 progeny by using the test cross method.

For the test cross, we will cross the F1 progeny with the homozygous recessive parent (f/f•b/b).The resulting offspring from the test cross:F/f•b/b × f/f•B/B ⇒ f/f•b/B, f/f•b/b, F/f•b/B, and F/f•B/BThe phenotype of f/f•b/b and F/f•b/b is similar. Hence, we can ignore them. Thus, the only observed genotype of the offspring is F/f•B/B. This genotype can only be possible if the tester's genotype is F/F•B/B.The genotype of the katydid used as the tester is F/F•B/B.

Learn more about allele at:

https://brainly.com/question/23516288

#SPJ11

In the summer, which of the following would be the hottest?
A. Urban areas like downtown
B. Rural areas near a city
C. A community garden space with lots of vegetation
D. Suburbs​

Answers

Answer:

A. Urban areas like downtown

Explanation:

Structures such as buildings, roads, and other infrastructure absorb and  re-emit the sun's heat more than natural landscapes such as forests and water bodies. Urban areas, where these structures are highly concentrated and greenery is limited, become “islands” of higher temperatures relative to outlying areas.

Hope it helped! Pls mark me brainliest!

Besides the major endocrine organs, isolated clusters of cells produce hormones within body organs that are usually not associated with the endocrine system. A number of these hormones are listed in the table below. Fill in the missing information (blank spaces) on these hormones in the table.

Can someone help me fill in the blank spaces please

Answers

Chemical Makeup: Human chorionic Gonadotropin (hCG): Protein; Leptin: Peptide.

What is Chemical Makeup?

Chemical makeup is the composition of a substance in terms of its elements and their proportions, such as the proportions of carbon, hydrogen, and oxygen in water. This composition can vary from single elements to complex combinations of elements, depending on the substance in question. Chemical makeup can determine a substance’s physical and chemical properties, such as boiling point, melting point, and reactivity. Different chemical makeups can also give rise to different forms of the same matter, such as the different states of water (solid, liquid, and gas). In order to determine the chemical makeup of a given substance, scientists use tools such as mass spectrometry and chromatography.

Source: Human Chorionic Gonadotropin (hCG): Placenta; Leptin: Adipose tissue
Effects: Human Chorionic Gonadotropin (hCG): Stimulates production of progesterone and estrogen by the corpus luteum; Leptin: Regulates appetite and energy expenditure.

To learn more about Chemical Makeup
https://brainly.com/question/1555930
#SPJ1

In pea plants, having green peas (G) is dominant over yellow peas (g), and having round peas (R) is dominant over wrinkled peas (r).
Cross a pea plant that is heterozygous green and homozygous round with a pea plant that is heterozygous for both traits. Complete the Punnett square and determine the genotypes and phenotypes of the offspring

Answers

The phenotype of the offspring would be green and round, green and wrinkled, yellow and around, and yellow and wrinkled. The Punnett square would look like this:

       |   GR   |   Gr   |  gR   |  gr
     --|   ----   |  ----   |  ----    |  ---
  GR| GGRr | GGrr | GgRr | Ggrr
  Gr | GGRr | GGrr | GgRr | Ggrr
  gR| GgRr  | Ggrr  | ggRr | ggrr
  gr | GgRr  | Ggrr  | ggRr | ggrr

To complete the Punnett square and determine the genotypes and phenotypes of the offspring, we first need to identify the parental genotypes. The first parent is heterozygous green (Gg) and homozygous round (RR), while the second parent is heterozygous for both traits (GgRr).

Based on the Punnett square of this case, possible genotypes of the offspring are GGRr, GGrr, GgRr, Ggrr, ggRr, and ggrr. These genotypes, when translated into phenotypes, would look like as follows:

Green and round (GGRr, GGrr, GgRr, Ggrr)Green and wrinkled (Ggrr)Yellow and round (ggRr)Yellow and wrinkled (ggrr)

So, the offspring will have a 3:1 ratio of green to yellow peas and a 3:1 ratio of round to wrinkled peas.

Learn more about Punnett square at https://brainly.com/question/3522181

#SPJ11

Which characteristic of the karyotype helps identify the male shown as having Klinefeller
syndrome?
A. the length of the sex chromosomes
B. the total number of sex chromosomes
C. the length of the nonsex chromosomes
D. the total number of nonsex chromosomes

Answers

Answer: B

Explanation:

Klinefeller syndrome is where males have an extra X chromosome. The x chromosome is a sex chromosome.

1. Name and describe several factors limiting the spread of nonvascular plants such as liverworts, hornworts, and mosses.
2. In seed plants, a fertilized egg develops into an embryo, which is contained within the seed. Describe the structure and function of each part of the embryo. What advantages do these structures give a spermatophyte compared to a bryophyte?

Answers

1. Several factors limiting the spread of nonvascular plants such as liverworts, hornworts, and mosses include their reliance on moisture for spore dispersal.



2. The structure and function of the embryo of a spermatophyte, or seed-bearing plant, is composed of the cotyledons, the radicle, and the plumule.

1. their inability to compete with vascular plants, and their lack of a vascular system. Without a vascular system, these plants are unable to transport water and nutrients effectively, and are therefore restricted in their growth.

2. The cotyledons are the two seed leaves and are responsible for the initial nourishment of the embryo. The radicle is the first root of the embryo and is responsible for anchoring the embryo in the soil. The plumule is the shoot of the embryo and is responsible for the upward growth of the seedling.

These structures give the spermatophyte the advantage of being able to develop in more hostile environments than bryophytes, since the embryo is protected by the seed coat, and the structures provide the seedling with the initial resources it needs to grow.

To know more about embryo click on below link:

https://brainly.com/question/28301178#

#SPJ11

15. Use what you know about probability to determine the percent chance of each of the following
outcomes from a cross between two parents with the genotypes AaBbCCDdEEff and AaBbCcddEeFF.
a. AABBCCDDEEFF=
b. AaBbCcddEEFf=

Answers

(a)There is a 1/1024 chance of the offspring having the genotype AABBCCDDEEFF.; (b)There is a 1/65536 chance of the offspring having the genotype AaBbCcddEEFf.

What is genotype?

Scoring of the type of variant present at given location in the genome is called genotype.

Parent 1 gametes:

AaBbCCDdEEff: ABCEf, ABCEf, abCEf, abCEf, ABcEf, ABcEf, abcEf, abcEf, ABCEf, ABCEf, abCEf, abCEf, ABcEf, ABcEf, abcEf, abcEf

Parent 2 gametes:

AaBbCcddEeFF: ABCde, ABCde, ABcde, ABcde, AbCde, AbCde, Abcde, Abcde, ABCde, ABCde, ABcde, ABcde, AbCde, AbCde, Abcde, Abcde

a. AABBCCDDEEFF:

(1/2)⁵ x (1/2)⁵ = 1/1024

This means that there is a 1/1024 chance of the offspring having the genotype AABBCCDDEEFF.

b. AaBbCcddEEFf:

For the AaBbCc part of the genotype, there are 4 possible alleles for each parent, so there are 16 possible combinations. The probability of each parent passing on a specific combination of alleles is 1/16, so the probability of both parents passing on the same combination of alleles is (1/16)²= 1/256.

For dd, each parent has a 1/4 chance of passing on recessive allele, so the probability of both parents passing on the recessive allele is (1/4)² = 1/16.

For EE, each parent has a 1/2 chance of passing on dominant allele, so probability of both parents passing on the dominant allele is (1/2)² = 1/4.

For Ff , each parent has a 1/2 chance of passing on either allele, so probability of both parents passing on same allele is (1/2)² = 1/4.

(1/256) x (1/16) x (1/4) x (1/4) = 1/65536

This means that there is a 1/65536 chance of the offspring having the genotype AaBbCcddEEFf.

To know more about genotype, refer

https://brainly.com/question/902712

#SPJ1

How can bones be classified by their shapes

Answers

Bones can be classified by their shapes into five main categories: long bones, short bones, flat bones, irregular bones, and sesamoid bones.

Long Bones: These bones are longer than they are wide and have a shaft (diaphysis) with two distinct ends (epiphyses). Examples of long bones include the femur (thigh bone), humerus (upper arm bone), and phalanges (fingers and toes).
Short Bones: These bones are roughly cube-shaped and are approximately as wide as they are long. Examples of short bones include the bones of the wrist (carpals) and the ankle (tarsals).
Flat Bones: These bones are thin and flat, with a slight curve. They usually provide a broad surface for muscular attachment and protection of internal organs. Examples of flat bones include the skull bones, ribs, and scapula (shoulder blade).
Irregular Bones: These bones have complex shapes that don't fit into any of the other categories. Examples of irregular bones include the vertebrae (spinal bones), pelvic bones, and some facial bones.
Sesamoid Bones: These bones are small and round, embedded in tendons where they pass over joints. Their shape allows them to reduce friction and improve joint stability. Examples of sesamoid bones include the patella (kneecap) and small bones in the hands and feet.
It's important to note that bones can have characteristics of more than one category. For example, the clavicle (collarbone) is a long bone, but it's also somewhat flat

Identify four functional groups and describe theproperties of each. Give two examples of chemicals in which thefunctional groups can be found.

Answers

There are four main functional groups: alcohols, amines, acids, and aldehydes. Each of these groups has distinct properties.

1. Hydroxyl group (-OH): This group is polar and can form hydrogen bonds, making compounds with this group soluble in water.

Examples of chemicals with this group are ethanol (CH3CH2OH) and glycerol (CH2OHCHOHCH2OH).

2. Carbonyl group (>C=O): This group is also polar and can form hydrogen bonds. It is found in aldehydes and ketones.

Examples of chemicals with this group are formaldehyde (HCHO) and acetone (CH3COCH3).

3. Carboxyl group (-COOH): This group is acidic and can donate a proton (H+) to a solution.

Examples of chemicals with this group are acetic acid (CH3COOH) and amino acids (NH2CHRCOOH).

4. Amino group (-NH2): This group is basic and can accept a proton (H+) from a solution.

Examples of chemicals with this group are ammonia (NH3) and amino acids (NH2CHRCOOH).

You can learn more about functional groups at

https://brainly.com/question/493841

#SPJ11

can someone help me finish this

Answers

Explanation:

Refer to pic..........

Given a quantitation value for a DNA extract (e.g. 27.8 ng/uL),
be able to calculate how you would make 10 uL of a 0.3 ng/uL
solution for adding to an Identifiler reaction.

Answers

To make 10 uL of a 0.3 ng/uL solution for adding to an Identifiler reaction, we need to calculate the amount of DNA sample that is needed. To do this, we can use the following formula:

Amount of DNA sample = Volume of solution x Concentration of sample

Therefore, we can calculate the amount of DNA sample needed by multiplying 10 uL (volume of solution) by 0.3 ng/uL (concentration of sample). This gives us 3 ng of DNA sample which needs to be added to 10 uL of solution.

To get this amount of DNA sample from the original 27.8 ng/uL solution, we need to calculate the volume of solution we need using the following formula:

Volume of solution = Amount of DNA sample / Concentration of sample

Therefore, we can calculate the volume of solution required by dividing 3 ng (amount of DNA sample) by 27.8 ng/uL (concentration of sample). This gives us 0.108 uL of the 27.8 ng/uL solution.

Finally, we can mix 0.108 uL of the 27.8 ng/uL solution with 9.892 uL of buffer solution to make 10 uL of a 0.3 ng/uL solution for adding to an Identifiler reaction.

Know more about DNA here

https://brainly.com/question/264225#

#SPJ11

Suppose you are measuring the metabolic rate of a youmg growing cow by using the material-balance method. procedures could you use to take account of the cow's git so that you measure a correct metabolic rate?

Answers

To measure the metabolic rate of a young growing cow using the material-balance method, you can take account of the cow's growth by measuring the cow's feed intake and growth rate over time.

This data can then be used to calculate the energy balance, or the difference between the energy intake and the energy output, which will give an accurate measure of the metabolic rate.

To use the material-balance method, you will need to measure the animal's body weight, feed intake, and heat production at regular intervals. You can then use this data to calculate the energy balance. For example, if the energy output exceeds the energy intake, the metabolic rate is too high. Conversely, if the energy intake exceeds the energy output, the metabolic rate is too low.

Learn more about material-balance method: https://brainly.com/question/13405272

#SPJ11

six applications for tissue culture. Describe all six
applications and give two examples of each one.

Answers

Tissue culture is a method of cell culture used to study the growth and behavior of cells. It has a variety of applications in medicine, biotechnology, and research. The six main applications are:


   Therapeutic Uses: Tissue culture can be used to generate cells for therapeutic purposes, such as in the treatment of diabetes. Examples include the production of insulin-producing cells from stem cells and the use of cultured corneal cells for transplantation.
   Research and Development: Tissue culture can be used to study the behavior of cells in different environments and to observe genetic changes and mutations in the laboratory. Examples include the study of cell differentiation and gene expression.
   Toxicity Testing: Tissue culture can be used to test the toxicity of chemicals, drugs, and other substances on cells. Examples include testing the toxicity of a drug on cancer cells and determining the effects of environmental pollutants on cells.
   Drug Testing: Tissue culture can be used to test the effectiveness of drugs and other substances on cells. Examples include testing the effectiveness of an antibiotic on bacterial cells and determining the effects of a compound on stem cells.
   Cellular Modeling: Tissue culture can be used to create models of cells and their behavior. Examples include creating models of cancer cells and studying the mechanisms of drug action.
   Biotechnology: Tissue culture can be used to create cells for biotechnological purposes, such as the production of vaccines. Examples include the production of cell lines for vaccine production and the use of tissue culture to produce monoclonal antibodies.

Here you can learn more about Tissue culture

https://brainly.com/question/11865791#

#SPJ11

Natural selection increases the number of different types of
alleles within a population.
True or false

Answers

Natural selection increases the number of different types of alleles within a population.

The given statement is False.

Natural selection does not increase the number of different types of alleles within a population. Instead, it increases the frequency of certain alleles that are advantageous for survival and reproduction in a particular environment. These advantageous alleles become more common in the population over time, while less advantageous alleles become less common. This process is known as adaptive evolution and can lead to changes in the genetic makeup of a population over time. However, it does not increase the number of different types of alleles within a population.

For more such questions on Natural selection, click on:

https://brainly.com/question/23929271

#SPJ11

Based on their differences in cell structure, which of the following would you be more likely to see in bacteria than in Eukaryotes?
-More proteins with primary structure changes.
-More time between stimulus and response when the response requires production of new proteins
-Faster transcription
-All of the above

Answers

Based on their differences in cell structure, you would be more likely to see faster transcription in bacteria than in Eukaryotes.

Bacteria are prokaryotes, which means they have a simpler cell structure compared to eukaryotes. One of the key differences between prokaryotes and eukaryotes is that prokaryotes do not have a nucleus. Instead, their DNA is found in a circular loop called a nucleoid. This means that transcription (the process of copying DNA into RNA) can occur more quickly in bacteria than in eukaryotes because there is no need for the RNA to exit the nucleus before it can be translated into proteins.

In contrast, eukaryotes have a more complex cell structure with a nucleus that separates the DNA from the rest of the cell. This means that transcription occurs inside the nucleus, and the resulting RNA must be transported out of the nucleus before it can be translated into proteins. This extra step can slow down the process of transcription in eukaryotes compared to bacteria.

Therefore, the correct answer is faster transcription.

Learn more about transcription in bacteria at https://brainly.com/question/25695645

#SPJ11

The diagram below shows reservoir interactions with the phosphorus cycle: Image shows arrows that point counterclockwise. Label A is over the water. An arrow points from there to label B, which is dead fish. From there, an arrow points to label C, which is rock under water. From there, an arrow points to label D, which is plants. Which statement best describes label C? Phosphorus is evaporating from the water into the atmosphere. Bacteria convert phosphate in dead organisms into phosphorus. Organisms, such as fish, absorb phosphorus from their food (plants and other animals). Sedimentary rocks are the largest source of phosphorus.

Answers

The sedimentary rοcks beneath the water are depicted by label C in the diagram. In the phοsphοrus cycle, sedimentary rοcks are οne οf the largest phοsphοrus reservοirs.

Minerals in rοcks that cοntain phοsphοrus weather οver time, releasing phοsphοrus intο the water and sοil, where plants and οther οrganisms can use it.

Which statement best describes label C?

As a result, the statement that mοst accurately explains label C is: Phοsphοrus cοmes primarily frοm sedimentary rοcks.

Sedimentary rοcks: what are they?  

οne οf the three main types οf rοcks, sedimentary rοcks are fοrmed when οrganic materials, mineral fragments, and sediment cοmbine οver time. Sediments can travel by wind, water, οr ice and be depοsited in layers befοre being cοmpacted and cοnsοlidated intο sοlid sedimentary rοcks.

There are three main types οf sedimentary rοcks: οrganic, clastic, and chemical. Sandstοne, shale, and cοnglοmerate are examples οf preexisting rοck fragments that make up clastic sedimentary rοcks.

Learn more about sedimentary rocks:

brainly.com/question/28286133

#SPJ1

Label C in the diagram represents the sedimentary rοcks that are present belοw the surface οf the sea. Sedimentary rοck fοrmatiοns are amοng the greatest reservοirs οf phοsphοrus in the phοsphοrus cycle.

When minerals in phsphrus-cοntaining rοcks weather οver time, phosphorus is released intο the water and sοil, where plants and οther οrganisms can use it.

What definitiοn best fits label C?

The phrase "Phοsphοrus οriginates predοminantly frοm sedimentary rοcks" sums up label C the best.

What precisely are sedimentary rοcks?

Sedimentary rοcks, οne οf the three majοr types οf rοcks, fοrm thrοughοut time as a result οf the fusiοn οf οrganic mοlecules, mineral fragments, and silt. Befοre being cοmpacted and cοllided intο deep sedimentary rοcks, sediments can be transpοrted by wind, water, οr ice. They can alsο be depοsited in layers.

There are three main types οf sedimentary rοcks: οrganic, clastic, and chemical. Sandstοne, shale, and cοnglοmerate are examples οf preexisting rοck fragments that make up clastic sedimentary rοcks.

Learn more about sedimentary rocks:

brainly.com/question/28286133

#SPJ1

How have seeds contributed to the success of angiosperms?
Select one:
a. by attracting insects to transfer them to the stigma
b. by hitch-hiking on animals to be transported to the stigma
c. by nourishing the embryo to live on for a while
d. by nourishing the plants that make them

Answers

Seeds have contributed to the success of angiosperms by nourishing the embryo to live on for a while. This is because the seed contains a food source for the developing plant, which allows it to survive until it can establish roots and begin to photosynthesize.

Additionally, seeds allow angiosperms to reproduce and spread to new locations, which also contributes to their success.

Overall, the development of seeds has been a key factor in the success of angiosperms, and has allowed them to become one of the most dominant groups of plants on Earth.

see more about angiosperms in:

https://brainly.com/question/3296115

#SPJ11

Determine the source of nucleic acid you will use as a template for cloning c4. Outline the major steps necessary (don't include full protocol) to prepare the template for PCR

Answers

The source of nucleic acid for cloning c4 will depend on the organism of interest and the specific gene sequence being targeted.

If the gene sequence is known, a genomic DNA or cDNA library could be screened to identify a suitable template. Alternatively, PCR amplification of the gene sequence from genomic DNA or cDNA can be performed.

The major steps necessary to prepare the template for PCR include DNA extraction, quantification, and purification. DNA extraction can be performed using a variety of methods, such as organic extraction or commercial DNA extraction kits.

The extracted DNA should be quantified to ensure there is enough template for PCR. DNA purification can be achieved using commercially available kits or by precipitation with ethanol. Finally, the purified DNA can be used as a template for PCR amplification.

For more questions like PCR click the link below:

https://brainly.com/question/13565865

#SPJ11

What is the name of the site where foreign DNA can be inserted
into in the ... a. C-DNA b. B-DNA c. T-RNA d. T-DNA

Answers

The name of the site where foreign DNA can be inserted into in the Ti plasmid is T-DNA. Option d.

T-DNA, or transfer DNA, is a section of the Ti plasmid that is transferred to the plant cell during genetic transformation. This is where foreign DNA can be inserted in order to create genetically modified plants. The T-DNA region is flanked by border sequences, which are recognized by the virulence (Vir) proteins that facilitate the transfer of the T-DNA into the plant cell.

In summary, the T-DNA is the site where foreign DNA can be inserted into in the Ti plasmid.

To learn more about DNA, click here:

https://brainly.com/question/264225

#SPJ11

The group of organelles and cellular structures that work together to transport peptides/proteins out of the cell are collectively called_______

Answers

The group of organelles and cellular structures that work together to transport peptides/proteins out of the cell are collectively called the secretory pathway. The secretory pathway is composed of several organelles and cellular structures, including the endoplasmic reticulum (ER), the Golgi apparatus, and vesicles.

The secretory pathway functions to transport proteins from the site of synthesis in the ER to the plasma membrane, where they can be secreted out of the cell. The process begins with the synthesis of proteins on the rough ER. The proteins are then transported to the Golgi apparatus, where they undergo further modifications, such as glycosylation. Finally, the proteins are packaged into vesicles, which transport them to the plasma membrane for secretion.
In summary, the secretory pathway is a group of organelles and cellular structures that work together to transport peptides/proteins out of the cell. It is composed of the endoplasmic reticulum, the Golgi apparatus, and vesicles, and functions to transport proteins from the site of synthesis to the plasma membrane for secretion.

For more question on organelles click on

https://brainly.com/question/6563752

#SPJ11

What environmental conditions might play a role in a person’s tendency to contract a disease? Genetics can also play a role in a person’s tendency to contract a certain disease, but many human diseases do not have a straightforward single-gene cause. What are some diseases you can think of that may be inherited--caused by certain genes?

Answers

The environmental conditions might play a role in a person’s tendency to contract a disease are polluted environment and environment with ultraviolet radiation. Some diseases that may be inherited--caused by certain genes are alzheimer's disease, cystic fibrosis, Huntington's disease, Marfan syndrome, and sickle cell anemia.

Living or working in a polluted environment increases the risk of respiratory illnesses, lung cancer, and other health problems. Long-term exposure to ionizing radiation has been linked to cancer. Long-term exposure to ultraviolet radiation, particularly from the sun, increases the risk of skin cancer, cataracts, and other eye disorders. Poor hygiene can lead to the spread of infectious diseases such as cholera, dysentery, and other gastrointestinal infections. Then  lack of clean water and sanitation increases the risk of infectious diseases such as typhoid, hepatitis, and other waterborne illnesses.

Different types of environmental factors can influence human health, with a range of communicable and non-communicable diseases associated with environmental conditions. These environmental conditions may affect the occurrence, severity, or outcome of infectious diseases or non-communicable diseases. Environmental conditions can play a role in the spread of diseases, their prevalence, and transmission, this can include exposure to air pollution, water pollution, and poor sanitation. It can also include exposure to radiation or toxins. Some of the diseases that may be inherited include: Alzheimer's disease, cystic fibrosis, Huntington's disease, Marfan syndrome, and sickle cell anemia.

Learn more about cystic fibrosis at:

https://brainly.com/question/28734490

#SPJ11

Anaerobically growing bacteria can grow in which type of medium? choose one: a. Complex b. Selective c. Reduced d. Enriched

Answers

B.selective. One or more microbe species can be chosen using a selective medium. They will be the only bacteria that can grow on or in the medium because all others will be prevented from doing so.

There are numerous methods for obtaining selectivity. It is easy to choose for organisms that can use the sugar, for example, by making a certain sugar the sole source of carbon in the medium. A certain type of microorganism can be selectively blocked by the use of dyes, antibiotics, salts, or other inhibitors that affect the enzyme systems or metabolism of the organisms.

Differentiating between groups of species or closely related organisms is done using differential media. All three sectors medical, food, and dairy use a variety of selection and differential media.

Learn more about bacteria here:

https://brainly.com/question/8008968

#SPJ4

What is the average height for a 14 year girl?

Answers

Answer:63.2 inches, 160.5 cm, 5.26 feet

Answer: around 63 to 64 inches or 5 feet 4 inches

Question 1 (2 marks): In your research, you are doing genetic experiments on pea plants. You are observing flower position (axial or terminal) and the color of the flower (purple or white). You are crossing parents with the following traits: Purple flower at axial position (homozygous for both traits) X White flower at terminal position (homozygous for both traits). Then, F1 generation offspring is further crossed with the same F1 generation offspring. 1 1. Draw the Punnett square table of the experiment (1 Marks). 1.2. Explain the ratio of obtaining the flowers at the terminal position (1 Marks).

Answers

1.1. The Punnett square table of the experiment is as follows:

|  | A | a |
|---|---|---|
| P | AP | aP |
| p | Ap | ap |

1.2. The ratio of obtaining the flowers at the terminal position is 0:4 or 0%, as all of the F1 generation offspring will have axial flowers.

1.1  The Punnett square is a tool used in genetics to predict the possible outcomes of a cross between two individuals. It consists of a table with rows and columns representing the alleles from each parent.

Each box in the table represents a possible combination of alleles in the offspring. In this particular Punnett square, the capital letter "A" represents a dominant allele, while the lowercase letter "a" represents a recessive allele.

1.2 This is because the axial flower position (A) is dominant over the terminal flower position (a), and all of the F1 generation offspring will have at least one A allele. Therefore, none of the F1 generation offspring will have terminal flowers.

To know more about F1 generation click on below link:

https://brainly.com/question/31009641#

#SPJ11

What enzyme (or chemical method) was used on Protein Example #2
to make the C fragments?
Group of answer choices
a. trypsin
b. chymotrypsin
c. V8 protease
d. asp-N-protease
e. pepsin
f. cyanogen bromi

Answers

The enzyme used on Protein Example #2 to make the C fragments is trypsin.

Trypsin is a serine protease that cleaves proteins at the carboxyl side of lysine and arginine residues. It is an enzyme in the first section of the small intestine that starts the digestion of protein molecules by cutting long chains of amino acids into smaller pieces.

To know more about trypsin, refer here:

https://brainly.com/question/15280465#
#SPJ11

question: Why was the blood collected in a tube containing EDTA
? [250 words]
note: this is lab report.
subject name: introduction biochemistry and biotechnology

Answers

The blood was collected in a tube containing EDTA (Ethylenediaminetetraacetic acid) because it is a widely used anticoagulant that prevents blood from clotting. EDTA works by binding to calcium ions in the blood and forming a stable complex, which prevents the calcium ions from participating in the coagulation cascade. This helps to keep the blood in a liquid state and prevents the formation of clots.

In a laboratory setting, it is important to collect blood samples in tubes containing anticoagulants like EDTA to ensure that the samples can be properly analyzed. If the blood were to clot, it would be difficult to obtain accurate measurements of various components of the blood, such as red blood cells, white blood cells, and platelets. By using an anticoagulant like EDTA, researchers can ensure that the blood sample remains in a liquid state and that accurate measurements can be obtained.

In addition to being used in laboratory settings, EDTA is also used in medical settings to prevent clotting in blood samples that are collected for diagnostic testing. This allows healthcare professionals to obtain accurate measurements of various components of the blood, which can help to diagnose and treat a wide range of medical conditions.

In summary, the blood was collected in a tube containing EDTA to prevent clotting and ensure that accurate measurements can be obtained. EDTA is a widely used anticoagulant that works by binding to calcium ions in the blood and preventing them from participating in the coagulation cascade.

Here you can learn more about EDTA

https://brainly.com/question/26556460#

#SPJ11

A
snow removal business would be classified as a O A. manufacturing
company. OB. service company. OC. simple company. OD. merchandising
company.

Answers

A snow removal business would be classified as a service company. Option B.

This is because the business provides a service, which is removing snow, rather than creating or selling a product.

A service company can be described as a company that offers some kind of service or help instead of manufacturing a product.

Manufacturing companies create products, merchandising companies sell products, and simple companies typically refer to small businesses with a limited number of owners. Therefore, the correct answer is B. service company.

To learn more about business, click here:

https://brainly.com/question/15826604

#SPJ11

What are all of the different types of pathology found in people
infected with: Entamoeba histolytica but not found in Trichomonas
infected human?

Answers

The different types of pathology found in people infected with Entamoeba histolytica but not found in Trichomonas infected human are : Colitis, Liver abscess, Peritonitis, Lung abscess, Gingivitis, Brain abscess, Amoeboma, Cutaneous amebiasis, and Genital ulceration.

Entamoeba histolytica is a protozoan parasite that can lead to a life-threatening disease called amoebiasis. It causes intestinal disease in humans and other primates, which is responsible for approximately 55,000 deaths per year.The pathology that develops in people infected with Entamoeba histolytica but not in Trichomonas infected humans is due to the parasite's ability to invade tissues outside of the intestine. In contrast, Trichomonas vaginalis, which infects the urogenital tract, is not associated with these types of pathological conditions.

Learn more about Entamoeba histolytica here: https://brainly.com/question/10815668.

#SPJ11

Other Questions
4) You have been tasked with setting up three large lights on a movie set. Describe what you would do to keep the lights and the people on the set safe. Which is not considered a defining characteristic of big data? Bob is testing out his hypothesis that the number of defective products manufactured in the factory production run follows the binomial distribution. Suppose that the number of defective products was tabulated for 200 randomly selected production runs. Additionally, each production run has a lot size of 20 products, where each product may be either defective or not defective.# of defective products Observed Frequency (out of 200 runs) 0 28 1 44 2 37 3 48 4 30 5 9 6 4 Test the if the number of defective products follows the hypothesized distribution at alpha = 1%. Show using critical region method. I need some help on both of my question! A car accelerates uniformly from rest to a speed of 40.0 mi/h in 13.0 s.(a) Find the distance the car travels during this time. m (b) Find the constant acceleration of the car. m/s2 The lines "For I cannot know your past / And of mine what can you know?" show the speaker's... The first three terms of an arithmetic sequence are as follows.-8, -5, -2Find the next two terms of this sequence.-8, -5, -2, In CT Proper which tissue type does/contains the following:a.has network of fibers, b.fibroblasts some immune cells presentc.Spleen liver, d.lymph nodes, e.thymus You have a ballon filled with carbon dioxide gas at STP. The balloons volume is 2.8L, How many molecules are in it? Case Study Questions: 1. What are the products /services being marketed by the organization/company?2. How did the customers get access the products/services of the organization/company?3. How the business organization/company identifies its special customers and their preferences?4. How did the organization/company set price/ pricing strategy?5. How the organization/company distributes its products/services to its customers?6. How the organization/company promotes its products/services?7. What are the strengths and weaknesses of marketing management of the organization/company?8. What are the opportunities and treats of the organization/company?9. What are the steps taken by organization to manage the weaknesses and treats?10. How the organization/company checks whether its customers are satisfied or not? In edible pea plants, tall plants are dominant over short plants. Maurice buys a pea plant at the store, and gets curious if his plant is true breeding tall or a hybrid for the height trait. What would Maurice have to do to figure this out?A. Maurice must cross his tall plant with another tall plant to see what kind of offspring he gets in the F1.B. Muarice must cross his plant randomly with another plant to see what kind of offspring is produced in the F1.C. Maurice must do a test cross to see what kind of offspring is created in the F1.D. There is no way to determine if Maurice's plant is true breeding or a hybrid. Consider a home energy storage (battery) system that can store up to 2 units of energy. At every time step, there is a demand for energy in the home which is drawn from 0,1, 2 units with equal probability independent of the demands in the previous time steps. At every point in time, you have to satisfy the demand either by discharging the needed energy from the battery or purchasing power from the grid (or a combination of the two). You could also choose to purchase power from the grid to charge your battery. The grid energy price is either H(igh) or Low) according to a Markov chain (Price moves from H to L with probability p, and from L to H with probability q). (a) Model the decision making as an infinite horizon MDP where the objective is to minimize the discounted cost of energy purchased over an infinite horizon. (b) Write down a policy a of your choosing. Perform two steps of the operator Tn for your policy, followed by one step of T. I have but one lamp by which my feet are guided; and thatis the lamp of experience. What appeal does he primarily use here? A. EthosOB. ParallelismOC. SimileD. Pathos Why are changes in nucleosome spacing so important in changing gene expression? Select one: a. Methylation of the DNA repels the nucleosomes from each other, and relaxes the conformation of the DNA. b. When DNA is phosphorylated or methylated and histones are acetylated, transcriptional activity is stimulated at specific DNA regions. c. When DNA is methylated and histones are deacetylated, nucleosomes are relatively close together and transcription is suppressed. d. Nucleosome spacing depends on parental imprinting of acetylation marks in the DNA. The famous handshake problem: Imagine five students sittingaround a table. How many handshakes do occur when they shake handswith each other exactly once? Draw and write about yourreasoning. find the value of x,de=5 (In order to solve the equations, students can use log tables orcalculators) Example 3. Find out MEC of a machine worth Rs. 10,000whose lumpsum net yield after 5 years hence is Rs. 15,000. URGENT HELP NEEDED!!! Two spheres of molten rock, both moving in the positive y-direction, collide in space. One sphere has a mass of 660 kg and is moving at a velocity of 17 m/s. The other sphere has a mass of 970 kg, and is moving at a velocity of 24 m/s. When the two spheres collide, and become one unit, what will be their combined velocity?21.2 m/s24.0 m/s41.0 m/s20.5 m/s Trump Machinery is analyzing a proposed project that is expected to sale 2,450 units, with an error range of 8%. The expected variable cost per unit is $246, and the expected fixed costs are $309,000. Both cost estimates are considered accurate within a 3% error range. The depreciation expense is $106,000. The sales price is estimated to be $599 per unit within a 2% error range. What is the amount of the total cost per unit under the worst-case scenario?(A) $448.58 (B) $404.16 (C) $394.58 (D) $366.67 Write a recursive formula for an, the nth term of the sequence 2, 6, 10, 14, ....