Answer: Your welcome!
Explanation:
The answer is retrofitting structural components. Retrofitting is the process of strengthening or reinforcing existing structures to better withstand an earthquake. This can be done by adding additional reinforcements, such as bracing, walls, columns, and foundations, or by replacing and strengthening existing components. Retrofitting is an important step in reducing the risk of an earthquake, as it can help older buildings become more resilient and better able to withstand the shaking of an earthquake.
describe four precautions and the reasons why they must be adhered to when conducting the compression test
The precautions to be followed when conducting a compression test are:
Warm up the engine to its normal operating temperature before the test.Disable the ignition system to prevent the engine from starting during the test.Remove all spark plugs from the engine before conducting the test.Keep the throttle wide open (fully depressed) during the compression test.What is compression testWhile doing the compression test, it is very important to keep the throttle fully open. This action lets a lot of air go into the engine, which makes the pressure inside the engine higher. If you keep the throttle open, it stops any pressure from building up which could mess up the test results.
Following these precautions when doing a compression test keeps the person doing the test safe, stops any harm to the engine, and gives accurate information for figuring out the engine's condition. Compression tests are important tests that help mechanics find problems with engine parts like valves, piston rings, and cylinder heads. This helps them fix the issues better.
Read more about compression test here:
https://brainly.com/question/552895
#SPJ2
Determine whether you will have enough fuel to fly a Cessna 182 Skylane from Phoenix to El Paso without refueling along the way.
Match the key word on the left with its definition on the right.
1. structured plan for spending
2. administrative level overseeing fund-raising
3. top administrative level overseeing operations
A: Budget
B: Development director
C: Development director
Here are keywords on the left with its definition on the right matching.
A: Budget - structured plan for spending
B: Development director - administrative level overseeing fund-raising
C: Executive director - top administrative level overseeing operations
(Note: it seems that the third option was accidentally duplicated in the original prompt. Here is a corrected version)
Define the term keywords.
Keywords are specific words or phrases that are used in a search query to help retrieve relevant results from a database, search engine, or another information system. These words are chosen carefully and are usually related to the subject or topic being searched. Keywords are important in information retrieval because they help to narrow down the search results and make it easier to find the information that is most relevant to the user's needs. In digital marketing, keywords are also used to optimize content for search engines and improve the visibility of websites or online resources in search engine results in pages.
it seems that the third option was accidentally duplicated in the original prompt. Here is a corrected version:
Match the keyword on the left with its definition on the right.
1. structured plan for spending
2. administrative level overseeing fund-raising
3. top administrative level overseeing operations
A: Budget - structured plan for spending
B: Development director - administrative level overseeing fund-raising
C: Executive director - top administrative level overseeing operations
To learn more about keywords click here
https://brainly.in/question/10302037
#SPJ1
According to the unit, technology serves practical purpose.what practical purpose would television serve?
What is the usual method of becoming a photovoltaic installer?
Responses
an apprenticeship
an apprenticeship
a two-year technical school or college program
a two-year technical school or college program
a two-year program, followed by an apprenticeship
a two-year program, followed by an apprenticeship
an online course
Answer:
There are multiple paths to becoming a photovoltaic installer, but some common methods include:
1. Apprenticeship: Many photovoltaic installers start as apprentices, where they work under experienced professionals to learn the skills and knowledge required for the job. Apprenticeships can last for several years, depending on the program.
2. Technical school or college program: Another common path is to enroll in a two-year technical school or college program that focuses on solar energy and photovoltaic installation. These programs provide classroom instruction as well as hands-on training.
3. Combined program and apprenticeship: Some training programs offer a combination of classroom instruction and apprenticeship experience. For example, a program may require students to complete a two-year program and then spend additional time working as an apprentice to gain practical experience.
4. Online course: It's also possible to become a photovoltaic installer by taking online courses that provide training in solar energy and photovoltaic installation. However, it's important to ensure that the course is reputable and provides hands-on training opportunities.
Explanation:
______are experts in multiple Al disciplines.
Answer:
"Polymaths" or "Renaissance people" are experts in multiple AI disciplines. They possess a broad range of knowledge and skills in different fields, including computer science, mathematics, statistics, data science, machine learning, and artificial intelligence. They can apply their diverse knowledge to solve complex problems and come up with innovative solutions in various domains.
Explanation:
what is the mechanical advantage?
Answer:
Explanation: vAndre and Elena knew that after 28 days they would have 228 coins, but they wanted to find out how many coins that actually is. Andre wrote: 228= 2 x 28 = 56 Elena said, “No, exponents mean repeated multiplication. It should be 28 x 28, which works out to be 784.” Who do you agree with? Could they both be correct or wrong? Explain your reasoning
Calculating support reactions in member struts
The support reactions and forces in each of the members can be calculated using the method of section.
What is forces?Force is a physical quantity that is an influence on an object, which causes a change in its motion or shape. It is measured in units of Newtons when dealing with mass, or in units of pounds when dealing with a force on a surface. Forces can either be a push or pull, and when two forces are acting in opposite directions, they are known as equal and opposite forces.
This involves cutting the structure at a convenient point and applying the equilibrium equations at the cut section.
Support Reactions and Forces in Members:
Member | Type | Force
:---: | :---: | :---:
AB | Tie | 6 kN
BC | Strut | 6 kN
CD | Strut | 4 kN
DE | Strut | 6 kN
EF | Strut | 4 kN
CF | Strut | -2 kN
Method of Section: To calculate the force in member CF, the structure is cut at point E and the equilibrium equations are applied.
F_AB + F_BC + F_CD + F_DE + F_EF = 0 \
6 + 6 + 4 + 6 + F_EF = 0 \
F_EF = -22 kN
Since F_EF = -22 kN, F_CF = -22 + 4 = -18 kN
The method of section is suitable for this problem as it allows us to isolate the force in one member of the structure by cutting the structure at an appropriate point and applying the equilibrium equations.
To learn more about forces
https://brainly.com/question/28782967
#SPJ9
What is a triangle and the examples
Answer:
A triangle is a closed, 2-dimensional shape with 3 sides, 3 angles, and 3 vertices. A triangle is also a polygon. The above figure is a triangle denoted as △ABC. Some real-life examples of triangles include sandwiches, traffic signs, cloth hangers, and a rack in billiards.
If I wanted to pull a small fastener out or scrape off excess material, I would use a ______.
Explanation:
If you want to pull a small fastener out or scrape off excess material, you would use a tool called a screwdriver. However, if you want to scrape off excess material that is softer, you might use a tool called a putty knife or a scraper.
What action can a painter take to maintain the exterior envelope of a building?
Ensure that paint colors suit the environment.
Ensure that paint colors suit the environment.
Create an ongoing schedule of repairs to maintain the building’s structural integrity.
Create an ongoing schedule of repairs to maintain the building’s structural integrity.
Supervise laborers who paint the building’s offices and residential spaces.
Supervise laborers who paint the building’s offices and residential spaces.
Apply sealants to protect the structure from weather and other sources of erosion.
Apply sealants to protect the structure from weather and other sources of erosion.
Apply sealants to protect the structure from weather and other sources of erosion.
Who is a painter?A painter is a specialist who assists with surface preparation, paint mixing for various purposes, and paint application with brushes or rollers to fill in cracks or apply color on walls and other things around a home, such as furniture or doors.
Other actions a painter can take are:
Before painting, clean the building's surface to ensure optimum adherence, look for indications of rot, mold, or other deterioration and make any necessary repairs, employ top-notch paint and other supplies to create a finish that will last.
Learn more about painters here:
https://brainly.com/question/17996239
#SPJ1
CAN SOMEONE HELP ME. THIS IS DUE VERY SOON!
The conversion of units is shown below:
120 km/h = 74.56 mph1000 W = 1.34 horsepower (hp)100 m^3 = 3531.5 cubic feet (ft^3)80 kg = 176.37 pounds (lbs)1000 kg/m^3 = 62.43 pounds per cubic foot (lb/ft^3)900 N = 202.5 pounds force (lbf)100 kPa = 14.5 pounds per square inch (psi)9.81 m/s^2 = 32.17 feet per second squared (ft/s^2)How was this conversion done?To convert from km/h to mph:
1 km = 0.621371192 miles
1 hour = 60 minutes x 60 seconds = 3600 seconds
Therefore, 1 km/h = 0.621371192 miles/3600 seconds = 0.000621371192 miles/second
Multiplying by 3600 seconds/hour and converting to mph gives:
120 km/h x (3600 seconds/hour) x (0.621371192 miles/1000 meters) = 74.56 mph
Read more about SI Units here:
https://brainly.com/question/16393390
#SPJ1
Ask the user for their first name
Say “Hello” followed by the user’s first name
Ask the user how old they are
Tell the user how old they will be in 10 years and in 20 years
Tell the user how old they were 5 years ago
Before you begin coding, use a word processing document to write pseudocode to plan out your program. Then, use your pseudocode to write your program.
Answer:
Explanation:
OUTPUT 'What is your name?'
INPUT user inputs their name
STORE the user's input in the name variable
OUTPUT 'Hello' + name
OUTPUT 'How old are you?'
INPUT user inputs their age
STORE the user's input in the age variable
IF age >= 70 THEN
OUTPUT 'You are aged to perfection!'
ELSE
OUTPUT 'You are a spring chicken!'
PART 2 OF THE TABLE
The following metrics converted are given as follows:
65 miles/hour is equal to 104.6071 kilometers/hour (km/h).65 miles/hour is equal to 29.0576 meters/second (m/s).60,000 Btu/h is equal to 17,584.2642 watts (W).120 lbm/ft^3 is equal to 1922.215608 kg/m^3.30 lb/in^2 is equal to 206.8428 kPa.200 lbm is equal to 90.718474 kilograms (kg).200 lbf is equal to 889.644 newtons (N)1) To convert 65 miles per hour to kilometers per hour, we can use the conversion factor:
1 mile/hour = 1.60934 kilometers/hour
So, 65 miles/hour is equal to:
65 miles/hour x 1.60934 kilometers/hour = 104.6071 kilometers/hour
Therefore, 65 miles/hour is equal to 104.6071 kilometers/hour (km/h).
To convert 65 miles per hour to meters per second, we can use the conversion factor:
1 mile/hour = 0.44704 meters/second
So, 65 miles/hour is equal to:
65 miles/hour x 0.44704 meters/second = 29.0576 meters/second
Therefore, 65 miles/hour is equal to 29.0576 meters/second (m/s).
2) To convert 60,000 British Thermal Units per hour (Btu/h) to watts (W), we can use the conversion factor:
1 Btu/h = 0.29307107 W
So, 60,000 Btu/h is equal to:
60,000 Btu/h x 0.29307107 W/Btu = 17,584.2642 W
Therefore, 60,000 Btu/h is equal to 17,584.2642 watts (W).
3) To convert 120 pounds-mass per cubic foot (lbm/ft^3) to kilograms per cubic meter (kg/m^3), we can use the conversion factor:
1 lbm/ft^3 = 16.0184634 kg/m^3
So, 120 lbm/ft^3 is equal to:
120 lbm/ft^3 x 16.0184634 kg/m^3/lbm/ft^3 = 1922.215608 kg/m^3
Therefore, 120 lbm/ft^3 is equal to 1922.215608 kg/m^3.
4) To convert 30 pounds per square inch (lb/in^2) to kilopascals (kPa), we can use the conversion factor:
1 lb/in^2 = 6.89476 kPa
So, 30 lb/in^2 is equal to:
30 lb/in^2 x 6.89476 kPa/lb/in^2 = 206.8428 kPa
Therefore, 30 lb/in^2 is equal to 206.8428 kPa.
5) To convert 200 pounds-mass (lbm) to kilograms (kg), we can use the conversion factor:
1 lbm = 0.45359237 kg
So, 200 lbm is equal to:
200 lbm x 0.45359237 kg/lbm = 90.718474 kg
Therefore, 200 lbm is equal to 90.718474 kilograms (kg).
6) To convert 200 pounds force (lbf) to newtons (N), we can use the conversion factor:
1 lbf = 4.44822 N
So, 200 lbf is equal to:
200 lbf x 4.44822 N/lbf = 889.644 N
Therefore, 200 lbf is equal to 889.644 newtons (N)
Learn more about metrics conversion at:
https://brainly.com/question/26259781
#SPJ1
An inside measurement can be taken with a tape measure by
Answer: Some people might bend the tape into the corner, which is a close guess at best. Or, you could run the tape measure right up against the side and add that reading to the size of the case of the tape measure.
Explanation: Either way you might need a dial caliper for a more accurate measurement
How do i fix a broken pipeline
Answer:
Fixing a broken pipeline typically involves several steps, which may vary depending on the nature and severity of the damage. Here are some general steps that may be involved:
1. Identify the location and extent of the damage. This may involve inspecting the pipeline using specialized equipment and techniques.
2. Shut down the pipeline to prevent further damage or leaks.
3. Drain any remaining fluid or gas from the affected section of the pipeline.
4. Remove the damaged section of the pipeline and replace it with a new section.
5. Install new gaskets and seals to ensure a tight fit and prevent leaks.
6. Test the repaired section of the pipeline to ensure that it is functioning properly and there are no leaks.
7. If necessary, clean up any spilled fluids or gases and restore the surrounding environment to its previous state.
8. Finally, restart the pipeline and monitor it closely to ensure that there are no further issues.
Explanation: