Based on my previous question I have posted.. Answer this.. It's the continuation



Table 7.3 is different ​

Answer:

ionic compounds

Explanation:

just finished ap chem

Answer:

An ionic compound can act as an electrolyte. This is because an electrolyte should allow charges to travel inside it.

e.g = H2SO4, NaCl

Explanation:

Answer:

Basic

Explanation:

The pH scale is a scale that tells us about the concentration of hydrogen ions in a solution.

Acids have many hydrogen ions. Acids have a pH of less than 7.

Bases have fewer hydrogen ions and more hydroxide ions.  Bases have a pH of less than 14.

If the solution has a pH of exactly 7, then it is pure water. Water has the same concentration of hydrogen and hydroxide ions.

The antacid tablet has a pH of roughly 9.5 Since this is less than 14, but not equal to or less than 7, this must be an base. Therefore, it is considered to be in the basic range.

Answer:

9.5 is a base

Explanation:

A ph of less than 7 is an acid

7 is neutral

7 to 14 is a base

9.5 is a base

Explanation:

The principle used in the preparation of these salts is to dissolve

the cystine in an alcoholic alkali solution to which just sufficient

water to effect solution has been added, and, after filtering from

excess cystine, to precipitate the salt by addition of a suitable

indifferent solvent. While various solvents, such as acetone,

ether, or large amounts of alcohol caused precipitations, these were

either oily or amorphous. Only acetonitrile was found to possess

the power of initiating regular crystallization in the salt solutions.

While the solutions of the different salts require different amounts

of the solvent for complete precipitation, a partial substitution of

absolute ether for acetonitrile was found expedient in the case

of the most soluble of the salts, the K salt.

Answer:

It is simply a process of forming crystal.

Explanation:            When salt is heated and dissolve in the liquid mainly water then its called saturated solution. When we further add salt and increase heat in order to dissolve it then it forcibly dissolve in liquid it's called supersaturated solution. After we slowly cool down the temperature then the salt we have put in supersaturated solution arises in the form of crystal. Hence its called crystalization.

Answer:

Helium has melting point of - 272.2°C or - 458°F

Sodium (Na) = 650°C. or 208°C

Magnesium (Mg) = 97.79°C. Or 1202°F

Explanation:

Answer:

Initial volume of the container (V1) = 1.27 L (Approx)

Explanation:

Given:

Number of mol (n1) = 5.67 x 10⁻²

Number of mol (n2) = (5.67 +2.95) x 10⁻² = 8.62 x 10⁻²

New volume (V2) = 1.93 L

Find:

Initial volume of the container (V1)

Computation:

Using Avogadro's law

V1 / n1 = V2 / n2

V1 / 5.67 x 10⁻² = 1.93 / 8.62 x 10⁻²

V1 = 10.9431 / 8.62

Initial volume of the container (V1) = 1.2695

Initial volume of the container (V1) = 1.27 L (Approx)

Answer: 1.27 L

Explanation:

First, calculate the final number of moles of propane (n2) in the container.

n2 = n1 + nadded = 5.67 × 10^−2 mol + 2.95 × 10^−2 mol = 8.62 × 10^−2 mol

Rearrange Avogadro's law to solve for V1.

V1 = V2 × n1 / n2

Substitute the known values of n1, n2, and V2,

V1 = 1.93 L × 5.67 × 10^−2 mol / 8.62 × 10^−2 mol = 1.27 L

Answer:

Because Argon is a inert gas

Explanation:

Inert gases don't take place in any experiments

Answer:

Below.

Explanation:

The sodium reacts strongly with the chlorine to form NaCl and the heat of reaction continues the brightness, whereas it does not react with the inert gas  argon and soon cools down.

The question is incomplete, the complete question is;

A chemist is identifying an unknown solid substance that appears purple in color. Upon close inspection with a hand lens, she notices tiny grains in the substance. Some of the grains are blue; other grains are red. Based on this information, the substance is most likely a

a. Compound

b. Homogeneous Mixture

c. Pure substance

d. solution

e. heterogeneous mixture

Answer:

heterogeneous mixture

Explanation:

A heterogeneous mixture simply means a mixture of two different substances. If two substances are the same, they are expected to have the same colour or appearance.

We were told in the question that the colour of the mixture appeared purple. On close examination, the sample was found to comprise of two different substances of different colours; blue and red.

If there are two substances of different colours present in the sample, it then follows that the sample is a heterogeneous mixture.

Answer:

The Inner Core

hope it was useful

stay at home stay safe

keep rocking

pls mark me as brani

........

Answer:

It can be improved by:

a) Adding METHANOL

b) Adding BUTANOL

c) Adding ETHANOL.

Explanation:

hope it helps.

Answer:

B)  40 individuals emigrate, 0 individuals die, 10 individuals are born, 28 individuals immigrate

Explanation:

its right on edg2020 :)

Explanation:

Deliquescent substances are solids that absorb moisture from the atmosphere until they dissolve in the absorbed water and form solutions. Efflorescent: Efflorescent substances are solids that can undergo spontaneous loss of water from hydrated salts.

Answer:

110 feet each second......

I think

Answer:

110 hope its right

Explanation:

Answer: 0.938 moles of [tex]ZnCl_2[/tex] will be produced.

Explanation:

To calculate the moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]

moles of zinc:

[tex]\text{Number of moles}=\frac{61.0g}{65g/mol}=0.938moles[/tex]

[tex]Zn+2HCl\rightarrow ZnCl_2+H_2[/tex]

As HCl  is in excess , zinc is the limiting reagent and it limits the formation of product.

According to stoichiometry :

1 mole of Zn produce =  1 mole of [tex]ZnCl_2[/tex]

Thus moles of  Zn produce = [tex]\frac{1}{1}\times 0.938=0.938[/tex] moles of [tex]ZnCl_2[/tex]

Thus 0.938 moles of [tex]ZnCl_2[/tex] will be produced.

Answer:

91.4%

Explanation:

Potassium hydrogen tartrate, KHT, reacts with KOH as follows.

KHT + KOH → H₂O + K₂T

where 1 mole of acid (KHT) reacts per mole o base (KOH), -That is acid/base ratio 1:1

The endpoint of a titration is the point in which moles of KOH = moles of KHT, you can see this endpoint with an indicator or doing a potentiometric titration.

As the endpoint requires 21.58mL = 0.02158L of a 0.1125M KOH, moles of KOH = moles of KHT are:

0.02158L × (0.1125mol / L) = 2.428x10⁻³ moles of KOH = moles of KHT

To convert these moles to grams you use molar mass of KHT (188.177g/mol):

2.428x10⁻³ moles of KHT × (188.177g / mol) = 0.457g of KHT are in the sample.

As you add 0.500g of sample, percentage of KHT in the sample is:

(0.457g / 0.500g) × 100 =

-That is the purity of the sample-

Answer:

BaCl2.2H2O

Explanation:

Data obtained from the question include:

Mass of barium chloride hydrate (BaCl2.nH2O) = 7.62g

Mass of anhydrous barium chloride (BaCl2) = 6.48g

Next, we shall determine the mass of water in the barium chloride hydrate (BaCl2.nH2O). This can be obtained as follow:

Mass of water (H2O) = Mass of barium chloride hydrate (BaCl2.nH2O) – Mass of anhydrous barium chloride (BaCl2)

Mass of water (H2O) = 7.62 – 6.48

Mass of water (H2O) = 1.14g

Next, we shall write the balanced equation for the reaction. This is given below:

BaCl2.nH2O —> BaCl2 + nH2O

Next, we shall determine the masses of BaCl2.nH2O that decomposed and the mass H2O produced from the balanced equation.

Molar mass of BaCl2.nH2O = 137 + (35.5x2) + n[(2x1) + 16]

= 137 + 71 + n[2 + 16]

= (208 + 18n) g/mol

Mass of BaCl2.nH2O from the balanced equation = 1 x (208 + 18n) = (208 + 18n) g

Molar mass of H2O = (2x1) + 16 = 18 g/mol

Mass of H2O from the balanced equation = n x 18 = 18n g

Summary:

From the balanced equation above,

(208 + 18n) g of BaCl2.nH2O decomposed to produce 18n g of H2O.

Finally, we shall determine the formula for the hydrated compound as follow:

From the balanced equation above,

(208 + 18n) g of BaCl2.nH2O decomposed to produce 18n g of H2O.

But 7.62g of BaCl2.nH2O decomposed to produce 1.14g of H2O i.e

18n/(208 + 18n) = 1.14/7.62

Cross multiply

18n x 7.62 = 1.14(208 + 18n)

137.16n = 237.12 + 20.52n

Collect like terms

137.16n – 20.52n = 237.12

116.64n = 237.12

Divide both side by the coefficient of n i.e 116.64

n = 237.12/116.64

n = 2

Therefore the formula for the hydrate, BaCl2.nH2O is BaCl2.xH2O.

Answer:

The formula mass of Na2S04 is 142.04 g/mol

Answer:

142.04 g/mol

Explanation:

the formula Na2SO4 means:two moles sodium (45.98g), one mile sulfur (32.06g), and four moles oxygen (64.00g) combine to form one mole of sodium surface (142.04g).

Answer: Love is when you feel like you can touch the sky when your around that person, when your at your best self or that person and when you put their needs before yours because your needs just don't matter. When you feel like you can't stop thinking about that person or you can stop smiling when you think of them. Its when you feel this warm, safe feeling when your around them. And if you really love them then my answer should be true for you.

Explanation:

because iv'e felt and have been in love before....

Answer:

Love is an intense, deep affection for another person. Love also means to feel this intense affection for someone. Love can also refer to a strong like for something or to like something a lot. Love has many other senses both as a verb and a noun

Answer:

C. A carbon atom has six protons, six neutrons, and six electrons.

Explanation:

Carbon has a relative atomic mass of 12 and an atomic number of 6. We must recall that the atomic number of an atom is the number of protons in that atom. The atomic number is also the same as the number of electrons in the neutral atom of that element.

To ensure electrical neutrality of the atom, the number of protons in the atom must be equal to the number of electrons in the atom.

The mass number of an atom is the sum of the number of protons and neutrons present in the atom. Since carbon has a mass number of 12, then there must be six neutrons present in the atom.

According to the electronic configuration and structure of atom statement which is true is that a carbon atom has six protons, six neutrons, and six electrons.The correct option is C.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

The carbon atom has atomic number '6' giving it six electrons and six protons and neutrons each.Thus, option 'C' is correct.

Learn more about atom,here:

https://brainly.com/question/1566330

#SPJ6

The computers that help control the machines in the factory

Answer:

There is a lot of empty space between them.

Explanation:

The kinetic molecular theory postulates that a substance is made up of tiny particles called molecules. The molecules of a gas are in constant random motion and collide elastically with each other. They also collide with the walls of the container.

The magnitude of intermolecular forces of attraction between gas molecules is very small. Hence gas molecules are largely apart with a lot of empty space between gas molecules.

Answer:C, There is a lot of empty space between them.

Explanation:

Answer: The given statement is TRUE.

Explanation:

An equilibrium reaction is one in which rate of forward reaction is equal to the rate of backward reaction.

Equilibrium constant is defined as the ratio of the product of the concentration of products to the product of the concentration of reactants each raised to their stochiometric coefficient.

For example for the given equilibrium reaction;

[tex]2H_2O(g)\leftrightharpoons 2H_2(g)+O_2(g)[/tex]

[tex]K_{eq}=\frac{[H_2]^2[O_2]}{[H_2O]^2}[/tex]

Thus the given statement that in calculating the equilibrium constant for a reaction, the coefficients of the chemical equation are used as exponents for the factors in the equilibrium expression is True.

Answer:

The correct option is;

D. (2)(56 g)

Explanation:

MgCl₂ + 2KOH → Mg(OH)₂ + 2KCl

From the balanced chemical reaction equation, we have;

One mole of MgCl₂ reacts with  two moles of KOH to produce one mole of Mg(OH)₂ and 2 moles of KCl

Therefore, the number of moles of KOH that react with one mole of KCl = 2 moles

The mass, m, of the two moles of KOH = Number of moles of KOH × Molar mass of KOH

The molar mass of KOH = 56.1056 g/mol

∴ The mass, m, of the two moles of KOH = 2 moles × 56.1056 g/mol = 112.2112 grams

The amount in grams of KOH that react with one mole of MgCl₂ = 112.2112 grams ≈ 112 grams =  (2)(56 g).

Answer:

the answer is D

Explanation:

good luck

Answer:

Sodium ion ( Na+) is known to have no smell at all but however appears salty which is the reason why the compound Sodium Chloride has the same type of taste.

Hydrogen ions ( H+) are known to have no taste which implies it being tasteless. It is also important to note that it has no smell too when perceived (odorless).

Answer:

venus

Explanation:

hope i helped

brainliest pls pls pls

-Zylynn

Answer: I would say that Saturn is most like Earth. Not only does it have moons, like Earth, but the atmosphere is also denser like Earth. It also has windstorms, granite they are much more intense than Earth’s, but they do indeed happen. Saturn also has hydrogen gas; this gas is here on Earth supporting life in our ocean. Therefore, there is a chance that the conditions on Saturn could provide the essentials for there to be life.

The question is incomplete, the complete question is;

Consider a pure crystalline solid that is heated from absolute zero to a temperature above the boiling point of the liquid. Which of the following processes produces the greatest increase in the entropy of the substance? A ) melting the solid B ) heating the gas C ) vaporizing the liquid D ) heating the solid E ) heating the liquid

Answer:

vaporizing the liquid

Explanation:

We generally define entropy in chemistry as the degree of disorderliness in a system. The entropy of gases is greater than that of liquids and the entropy of liquids is greater than that of solids. It then logically follows that the degree of entropy in gases is the greatest among all the states of matter while the entropy of solids is the least among all the states of matter since solid particles remain in their mean positions and can only vibrate or sometimes rotate. Liquid particles may translate while gaseous particles move at high velocity with negligible intermolecular forces of attraction between them.

A phase transition from liquid to gaseous state now represents the greatest change in the entropy of the system since gases posses the highest entropy among all the states of matter, hence the answer.

Answer:

NH4Cl

Explanation:

i just did the test

Answer:

NH4Cl

Explanation:

Edg 2020

Answer:

C9H13O3N

Explanation:

Take the atomic mass of C=12.0, H=1.0, O=16.0 and N=14.0.

We can draw a chart (please view this on desktop so to avoid spacing errors):

Let the mass of Epinephrine be 100g.

                             C                       H                          O                              N

mass(g) :              59                      7.15                    26.2                         7.65

no. of moles : 59/12 =4.9167     7.15/1 = 7.15     26.2/16=1.6375 7.65/14=0.5464

(n.o.m. = mass/molar mass)

Ratio:   4.9167/0.5464 =9    7.15/0.5464=13      1.6375= 3      0.5464/0.5464 =1

(divide the n.o.m. by the smallest n.o.m., which is 0.5464 in this case, take the whole numbers)

So, the empirical formula will be: C9H13O3N

But this is still not yet the molecular formula. We have to ensure the molar mass is 183g/mol. Multiply the empirical formula by n.

So, let the molecular formula of Epinephrine be (C9H13O3N)n.

12x9n + 1x13n + 16x3n + 14n = 183

108n + 13n + 48n + 14n = 183

183 n = 183.

n = 1

Hence, the molecular formula is C9H13O3N.

The question is incomplete, the complete question is;

A student investigated some properties of lead and recorded the findings in the table below. Property Observation Color Dull gray Density 11.3 g/cm3 Volume of sample 3 cm3 Melting point 327°C Reaction with air Lead oxide forms on the surface Electrical conductivity Conducts some electricity Which statement is true with respect to the investigation?

A. The student investigated only the physical properties of lead.  

B. The student investigated only the chemical properties of lead.  

C. The student investigated more physical properties than chemical properties of lead.  

D. The student investigated more chemical properties than physical properties of lead.

Answer:

The student investigated more physical properties than chemical properties of lead.

Explanation:

If we look at the things mentioned in the question as regards the approach of the student towards the study of lead, we will discover that he/studied;

Colour, density, volume, melting point and electrical conductivity which are all physical properties. Physical properties of a substance does not involve chemical reactions of the substance under study.

The only chemical property studied by the student is its formation of an oxide- lead oxide with air as follows;

2Pb(s) + O₂(g) → 2PbO(s)

Thus we can safely conclude that; the student investigated more physical properties than chemical properties of lead.

Answer:

c

Explanation:

edge 2021 :)

Answer:

MgO

Explanation:

Mg, which is magnesium, is considered a metal, when paired with Oxygen, which is a gas, it creates magnesium oxide, and the formula itself is a pairing of a metal with a nonmetal

Answer:

[tex]\boxed{MgO}[/tex]

Explanation:

Metals are red, nonmetals are blue, and metalloids are yellow in the attached file.

Using this table, you can see that Mg is a metal and O is a nonmetal, which fits the question criteria.

Hope this helps!