Based on a drawing of the cuvettes with the cell droplets, a Fluorescence-activated cell sorter (FACSorter) works by using a laser to excite the cells in the cuvettes, causing them to emit fluorescence.
The fluorescence emitted by the cells is then detected by a series of detectors, which sort the cells into different populations based on their fluorescence characteristics. The cuvette mechanism of a FACSorter differs from that of a FACScan in that the FACSorter uses a series of droplet generators to create small droplets containing single cells,
while the FACScan uses a flow cell to analyze the cells in a stream of fluid. The droplet generators in the FACSorter allow for the cells to be sorted into different populations, while the flow cell in the FACScan allows for the analysis of the cells in a more continuous manner.
Both the FACSorter and FACScan use a laser and detectors to analyze the cells, but the cuvette mechanism in each is different and serves a different purpose.
To know more about cell droplets refer here:
https://brainly.com/question/28486315#
#SPJ11
In a laboratory experiment, Ethan performed two different reactions with a short nucleotide sequence 5' ATGCCTCAGC 3' in tubes A and B. In tube A, the product formed was 3' TACGGAGTCG 5' and in tube B the product formed was 3' UACGGAGUUG 5'. What are the enzymes used in tubes A and B ? Give 2 features for each them comparing their products (note the sequences) formed
Tube A and Tube B both used DNA polymerase enzymes, which are proteins that act as catalysts to facilitate the process of replication and transcription in the nucleus of the cell. In Tube A, the enzyme used was DNA Polymerase I, which catalyzes the replication of DNA from one strand to another. In Tube B, the enzyme used was DNA Polymerase III, which catalyzes the transcription of DNA into messenger RNA.
The main difference between the two enzymes is that DNA Polymerase I replicates DNA while DNA Polymerase III transcribes DNA into mRNA. DNA Polymerase I has the ability to recognize and bind to short sequences of DNA while DNA Polymerase III has the ability to recognize and bind to longer sequences of DNA. The products formed by the two enzymes are also different, with Tube A forming the sequence 3' TACGGAGTCG 5' and Tube B forming the sequence 3' UACGGAGUUG 5'.
DNA Polymerase I and III are enzymes that are involved in the process of DNA replication and transcription, respectively. The two enzymes differ in their ability to recognize and bind to different lengths of DNA, and this can be seen in the different products formed by each enzyme.
Know more about DNA Polymerase here:
https://brainly.com/question/14315652
#SPJ11
Question 6 of 10
What is an outcome of gene regulation?
A. Each cell is able to produce only one protein.
B. Every cell produces all types of proteins.
C. Each cell contains the genes for only one protein.
D. Each cell produces only the proteins it needs.
DREVIOUS
Answer: Pretty sure it's D but I could be wrong.
Explanation: I think D is the outcome
During exercise a persons stroke volume increases to 140ml and
their heart rate increases to 169 beats min-1
calculate there cardiac output to one decimal place in litres
min-1
A person's cardiac output during physical activity is determined by multiplying their stroke volume by their heart rate. As such, the heart rate is 169 beats per minute and the stroke volume is 140 ml.
To calculate a person's cardiac output during exercise, we need to use the formula:
cardiac output = stroke volume x heart rate.
In this case, the stroke volume is given as 140 ml and the heart rate as 169 beats per minute.
To convert the stroke volume from milliliters (ml) to liters, we need to divide the value by 1000 since there are 1000 ml in one liter.
Therefore, we calculate the stroke volume in liters as 140 ml / 1000 = 0.14 liters.
Next, we can calculate the cardiac output by multiplying the stroke volume in liters by the heart rate in beats per minute:
Cardiac output = 0.14 liters x 169 beats per minute = 23.66 liters per minute.
To round this value to one decimal place, we can round up to the nearest tenth:
23.66 liters per minute ≈ 23.7 liters per minute.
Thus, the person's cardiac output during exercise is approximately 23.7 liters per minute.
Read more about Cardiac output.
https://brainly.com/question/22735565
#SPJ11
All of the following statements about replication origins are true EXCEPT:
Replication origins are unique DNA segments that contain thousands of GGC trinucleotide repeat sequences
Replication origins usually contain an AT-rich stretch
A eukaryotic chromosome has several origins of replication
A bacterial chromosome has many only one origin of replication
All of the following statements about replication origins are true except: a. Replication origins are unique DNA segments that contain thousands of GGC trinucleotide repeat sequences. This statement is false because replication origins do not contain thousands of GGC trinucleotide repeat sequences.
Replication origins are specific DNA sequences that serve as starting points for DNA replication. These sequences are recognized by the replication machinery, which then initiates the process of DNA replication. In eukaryotes, there are several origins of replication on each chromosome, allowing for multiple replication forks to form and speed up the process of DNA replication. In contrast, bacterial chromosomes typically have only one origin of replication.
The statement that replication origins usually contain an AT-rich stretch is true because these regions are easier to unwind and separate, allowing for the replication machinery to access the DNA and begin replication. Overall, the false statement about replication origins is that they contain thousands of GGC trinucleotide repeat sequences.
Learn more about replication origins at:
https://brainly.com/question/30236511
#SPJ11
How does a virus harm a cell?
a) The virus invades the cell and uses the cell's resources to reproduce
b) The virus protects the cell from bacteria
c) The virus produces toxins in the cell
d) The virus removes energy from the cell
Answer:
Explanation:
a) The virus invades the cell and uses the cell's resources to reproduce
Answer:A
Explanation: A virus cell invades its host cell and uses the cells resources to reproduce
the same as blood in the bloodstream and it should not clot nor separate. Just like plasma, this could be collected using the anticoagulant tube and must be mixed a minimum of 2 minutes prior to testing. is__--
The same as blood in the bloodstream and it should not clot nor separate. Just like plasma, this could be collected using the anticoagulant tube and must be mixed a minimum of 2 minutes prior to testing. The substance being described here is serum.
Serum is the liquid component of blood that remains after clotting has occurred. It is similar to plasma, but does not contain the clotting factors that are present in plasma. Serum is typically collected using an anticoagulant tube and must be mixed for a minimum of 2 minutes prior to testing to prevent clotting and separation.Plasma is the liquid component of blood, which makes up 55% of its total volume. It is composed of water, proteins, salts, and other substances.
For more such questions on Serum, click on:
https://brainly.com/question/30169557
#SPJ11
What does beta-oxidation do to fatty acids What does it use to do this?
Beta-oxidation is the process of breaking down fatty acids to produce energy. It uses enzymes and coenzymes to accomplish this.
In the process of breaking down fatty acids, the fatty acid is activated by attaching it to a molecule called coenzyme A (CoA). This produces a fatty acyl-CoA molecule. Next, the fatty acyl-CoA molecule is transported into the mitochondria, where beta-oxidation occurs. Once inside the mitochondria, the fatty acyl-CoA molecule is broken down into two-carbon units called acetyl-CoA. This process is catalyzed by a series of enzymes and requires the coenzyme FAD (flavin adenine dinucleotide) and NAD⁺ (nicotinamide adenine dinucleotide). The acetyl-CoA molecules are then used in the citric acid cycle to produce energy in the form of ATP (adenosine triphosphate). The FAD and NAD⁺ molecules are also reduced during beta-oxidation, producing FADH₂ and NADH, which are used in the electron transport chain to produce additional ATP.
Learn more about fatty acids: https://brainly.com/question/29370001
#SPJ11
Draw the integrated metabolic pathway during fed state. Include
at least three metabolic pathways occuring during a fed state. Link
the three pathways.
The integrated metabolic pathway during the fed state is a complex series of reactions that occur in response to the presence of nutrients in the body. There are several metabolic pathways that occur during the fed state, including glycolysis, the Krebs cycle, and fatty acid synthesis. These three metabolic pathways are linked through the production and utilization of ATP.
Here is a diagram of an integrated metabolic pathway during the fed state, including three metabolic pathways click on image tab.
Glycolysis is the first metabolic pathway that occurs during the fed state. It involves the breakdown of glucose to produce energy in the form of ATP. This process occurs in the cytoplasm of the cell and is an anaerobic process, meaning it does not require oxygen.
The Krebs cycle, also known as the citric acid cycle, is the second metabolic pathway that occurs during the fed state. It is an aerobic process that occurs in the mitochondria of the cell and involves the oxidation of acetyl CoA to produce ATP, carbon dioxide, and water.
Fatty acid synthesis is the third metabolic pathway that occurs during the fed state. It involves the conversion of excess glucose into fatty acids, which are then stored in the form of triglycerides in adipose tissue.
These three metabolic pathways are linked through the production and utilization of ATP, the primary energy currency of the cell. Glycolysis produces ATP, which is then used in the Krebs cycle to produce more ATP. Fatty acid synthesis also requires ATP, which is provided by the Krebs cycle.
For more such questions on glycolysis, click on:
https://brainly.com/question/1966268
#SPJ11
Which rock has never melted, but was produced by great heat and pressure?
Rock that has never melted but was produced by great heat and pressure is : metamorphic rocks.
What is metamorphic rocks?Metamorphic rocks form when rocks are subjected to high heat, high pressure, hot mineral-rich fluids.
The rock which gets changed from one kind to another is known as metamorphic rock. It is produced from either sedimentary rock or igneous rock and the majority of Earth's crust is formed of metamorphic rock.
Sedimentary and igneous rock turn into metamorphic rock due to intense heat from magma and pressure from the tectonic shifting.
Rock in spite of becoming extremely hot and under lot of pressure does not get melt. If it gets melt it is not a metamorphic rock but it is an igneous rock.
To know more about metamorphic rock, refer
https://brainly.com/question/20475194
#SPJ9
What is a thermocline?
OA. A marsh with very stagnant water
OB. A line where temperature changes
OC. A benthic zone with cold water
OD. A large body of cold saltwater
Answer:
B
Explanation:
its b cuz at a certain point the water temp changes
A Thermocline is a line where temperature changes. Thus, the most probable option for this question is found to be B.
What is the true meaning of thermocline?Thermocline may be characterized as a type of transition layer that may significantly exist between the warmer mixed water at the surface and the cooler deep water below.
It is usually easily found in large water bodies. At this transition layer, the temperature may change more rapidly with depth than it does in the layers above or below.
This distinctive layer is categorized on the basis of temperature fluctuations. It is relatively easy to tell when you have reached the thermocline in a body of water because there is a drastic change in temperature is being found.
Therefore, a thermocline is a line where temperature changes. Thus, the most probable option for this question is found to be B.
To learn more about thermocline, refer to the link:
https://brainly.com/question/953795
#SPJ5
Name one Biotic factor that could have caused an increase in the moose population and why?
Exercise 2- Questions 1. Using the field of view calculated in Exercise 1 for the high power lens, approximately how far across are each of the cells that are visible in the high power lens view of the "Onion Root Tip slide in Photo 11? BU ETT o Word(s) 2. Describe the most interesting detail that was visible for the onion root tip and the fruit fly. Use your results in Data Tables 5 and 6 to support your answer. Ti E т T O Words Image (A) copyright Ericsse 2014 Used under license from Shutterstock.com. Image (B) copyright Sweet Crisis 2014. Used under license from Shutterstock.com
A hypothetical scenario is been used since Exercise 1 is not given.
1. Using the field of view calculated in Exercise 1 for the high power lens, each of the cells that are visible in the high power lens view of the "Onion Root Tip slide in Photo 11 are approximately 0.05 mm across.
2. The most interesting detail visible for the onion root tip is the presence of mitotic cells in different stages of cell division, as observed in Data Table 5. The most interesting detail visible for the fruit fly is the observation of distinct body segments and appendages, as observed in Data Table 6.
What is the Onion cell about?Exercise 2 is a part of a biology lab or activity involving the observation of cells and organisms through a microscope.
Therefore, Question 2 asks the student to describe the most interesting detail that was visible for the onion root tip and the fruit fly, and use the results in Data Tables 5 and 6 to support their answer. This requires the student to carefully examine and analyze the data collected in the lab, and use it to draw conclusions about the observations made through the microscope.
Learn more about Onion cell on:
https://brainly.com/question/29888473
#SPJ1
"Name one method other than TVB-N measurements used to assess the
freshness of fish and describe it."
One method other than TVB-N measurements used to assess the freshness of fish is the torrymeter method and clostridium botulinum spores viability test
The torrymeter method uses a sensor to measure the electrical conductivity of the fish muscle. The electrical conductivity of the fish muscle is affected by the breakdown of proteins during the spoilage process. As the fish spoils, the electrical conductivity increases. The Torrymeter method is a fast and non-destructive method for assessing the freshness of fish. It is also a reliable method because the electrical conductivity of the fish muscle is not affected by factors such as size or species of the fish.
The clostridium botulinum spores viability test (CBT) is one method used to assess the freshness of fish. It measures the concentration of viable C. botulinum spores present in the fish, and is used to determine the potential for toxin production.
Learn more about clostridium botulinum at:
https://brainly.com/question/29853834
#SPJ11
Description a. How are the light-dependent and light-independent reactions of photosynthesis related to one another? b. Briefly compare and contrast the processes of cellular respiration and photosynt
A. The light-dependent reactions of photosynthesis create ATP and NADPH from light energy and the light-independent reactions use the ATP and NADPH to convert carbon dioxide into sugar molecules. The two sets of reactions are interdependent, as the light-independent reactions cannot occur without the products of the light-dependent reactions and vice versa.
B. Photosynthesis and cellular respiration are both processes that occur in living organisms to convert energy into usable forms. Photosynthesis uses light energy to convert carbon dioxide and water into glucose, while cellular respiration breaks down glucose and other molecules to produce energy in the form of ATP. Both processes are necessary for life, as they cycle energy and nutrients throughout the organism.
See more about photosynthesis in:
https://brainly.com/question/19160081
#SPJ11
____ guide organelle movement and are the structures that pull chromosomes to their poles during cell division.
The structures that guide organelle movement and pull chromosomes to their poles during cell division are called microtubules. These are long, thin, tube-like structures that are a component of the cytoskeleton and are made of the protein tubulin.
Microtubules play a crucial role in cell division by forming the spindle fibers that separate the chromosomes during mitosis. They also function in the movement of organelles within the cell, as well as the movement of cilia and flagella on the cell surface.Microtubules, with intermediate filaments and microfilaments, are the components of the cell skeleton which determinates the shape of a cell. Microtubules are involved in different functions including the assembly of mitotic spindle, in dividing cells, or axon extension, in neurons.
For more such questions on microtubules
https://brainly.com/question/1348622
#SPJ11
What are transcription factors?
A. Proteins that bind to DNA
B. Proteins that bind to RNA
C. RNAs that bind to proteins
D. Special DNA sequences that bind to proteins
Transcription factors are A. Proteins that bind to DNA.
Transcription factors are proteins that play a crucial role in regulating gene expression. They bind to specific DNA sequences, known as response elements, in the promoter regions of genes. By binding to these sequences, transcription factors can either activate or repress the transcription of the gene, thereby controlling the amount of protein that is produced. Transcription factors are essential for many cellular processes, including development, differentiation, and response to environmental stimuli.
Here you can learn more about Transcription factors
https://brainly.com/question/12150990#
#SPJ11
How are ER membrane proteins marked for retrieval to the ER from
the Golgi? Describe the steps in detail?
The process of retrieval of ER membrane proteins from the Golgi begins with the protein being marked with an enzyme called ubiquitin.
Step 1: Ubiquitin binds to the membrane protein and acts as a signal to the vesicle that the protein needs to be taken back to the ER.
Step 2: The vesicle then moves through the cytosol, fusing with the membrane of the ER. This process is mediated by the COPII proteins.
Step 3: Once the vesicle is inside the ER, the enzyme-protein complex is recognized and targeted for degradation by the proteasome.
Step 4: The protein is then recycled or reused as part of a new ER membrane.
To summarize, ER membrane proteins are marked for retrieval from the Golgi with the enzyme ubiquitin, which signals the COPII proteins to form a vesicle, move through the cytosol, and fuse with the membrane of the ER, leading to recognition and degradation by the proteasome.
To know more about membrane refer here:
https://brainly.com/question/26872631#
#SPJ11
You have heard someone use the term Diapedesis. What are they referring to?Select one:a. movement of WBC's into tissue from blood vesselsb. Vasoactive mediators causing blood vessel dilationc. Edemad.Production of Interferons
The term Diapedesis refers to the movement of WBC's (white blood cells) into tissue from blood vessels. So the correct answer is option a. movement of WBC's into tissue from blood vessels.
Diapedesis is an important process that occurs during the inflammatory response, which is the body's response to injury or infection. It allows white blood cells to leave the blood vessels and move into the affected tissue where they can help to fight infection or repair damage. Diapedesis is facilitated by the interaction of adhesion molecules on the surface of white blood cells and the endothelial cells that line the blood vessels.
Learn more about Diapedesis here: https://brainly.com/question/7301370.
#SPJ11
An atom that has lost an electron is:
positively charged.
on the right side of the periodic table.
less stable.
uncharged.
negatively charged.
Answer:
Positively charged.
Explanation:
An atom that has lost an electron is positively charged. When an atom loses an electron, it becomes positively charged because the number of protons in the nucleus now exceeds the number of electrons, resulting in a net positive charge. The other answer choices do not apply to an atom that has lost an electron.
Describe three ways that society, not physicians or medical staff, can help to reduce the development of drug-resistant microbial strains.
Society can play an important role in helping to reduce the development of drug-resistant microbial strains which are: disposing of unused medications, proper hygiene, and appropriate use of antibiotics.
Three key ways include:
1. Properly disposing of unused medications. Unused antibiotics that are improperly disposed of, such as being flushed down the toilet or thrown in the trash, can contaminate waterways and end up in the food chain, allowing drug-resistant microbial strains to develop.
2. Minimizing the spread of antibiotic-resistant bacteria. Proper hygiene, such as washing hands regularly, and maintaining clean and disinfected environments can help reduce the spread of bacteria and prevent the development of drug-resistant strains.
3. Promoting appropriate use of antibiotics. Often, antibiotics are overprescribed and misused, leading to the growth of drug-resistant microbial strains.
To know more about microbial refer here:
https://brainly.com/question/14598841#
#SPJ11
1.maltose
2 fructose
3 icing sugar
4 cornstarch
5 whipping cream
6 gelatin
7 milk
8 vagetable oul
9 mystery solution
10 water
Hot plate, 500 mL beaker, 7 test tubes, Test Tube Holder, Test Tube Rack, Distilled Water, Biuret’s Solution, Iodine, and Benedict’s Solution, Marker, Solutions,
Masking Tape, spot plate, graduated cylinders, droppers, dropper bottles.
Method
Part A- Testing for Mono and Disaccharides
1. Turn an electric plate on high and place a 500 mL beaker half full of water, to make a hot water bath (about 80 degrees Celsius). 2. Measure 3 mL of water and of each of the provided solutions (Not #5,#6 or #7) using a graduated cylinder. Place in clean test tubes and label each tube.
3. Add 15-20 drops of Benedict’s Solution to each test tube (this is about 1mL). 4. Place the test tubes in the hot water bath and note your observation. Use a test tube holder to move the tubes in and out of the bath. Observe for 6 min and record your any colour changes in a chart.
Colour of Benedict’s Reagent
Approximate Sugar Concentration (%)
blue
0
Light green
0.5-1.5
Green to yellow
1.0-2.0
orange
1.5-2.0
Red to red brown
>2.0
Part B –Testing for Starch
Place a drop of distilled water and a drop of iodine in a well on the spot plate.
Fill the wells of the spot plate with a drop of each testing solution (Not #5, #6 or #7). Place one drop of iodine in each solution noting the colour before and after the iodine is added. Iodine turns a blue/purple/black when mixed with a starch.
Part C – Testing for Protein
Measure 2 mL of water into a clean labelled test tube. Repeat this for your solutions (Not for #1 #2,, #3)
Add 2 mL of Biuret reagent to each test tube and tap the test tube to mix the contents. Record any colour changes. Biuret reagent reacts with the peptide bonds that join amino acids together, producing colour changes from blue (indicating no protein) to pink (+), violet (++) and purple (+++). The + sign indicates the relative amounts of the peptide bonds present.
Part D – Testing for Fat
Using a graduated cylinder, measure 3 mL each of #10, #5, #6, #8, #9 into clean labelled test tubes. Clean the graduated cylinder after each pour.
Add 6 drops of Sudan IV indicator to each test tube. Stopper the the test tubes and shake vigorously for 2 mins. Lipids turn Sudan IV from a pink to a red colour. Polar compounds will not cause the the Sudan IV to change colour.
Record the colour of your mixtures on the chart.
Many experiments have controls. What was used as a control? Why is it ideal to have a control? 2. What macromolecule(s) was/were present in the unknown solution? How do you know?
The control in this experiment was the distilled water. It is ideal to have a control because it provides a baseline for comparison and helps to eliminate any possible external factors that may influence the results. By comparing the results of the control with the results of the other solutions, we can determine if the changes observed in the other solutions are due to the presence of the macromolecules being tested for.
Based on the results of the experiment, the macromolecule(s) present in the unknown solution can be determined by observing the colour changes that occurred when the different reagents were added. If the unknown solution turned a different colour than the control when Benedict's Solution was added, it indicates the presence of mono or disaccharides. If the unknown solution turned a different colour than the control when iodine was added, it indicates the presence of starch. If the unknown solution turned a different colour than the control when Biuret reagent was added, it indicates the presence of protein. If the unknown solution turned a different colour than the control when Sudan IV indicator was added, it indicates the presence of fat. The specific colour changes that occurred can be compared to the colour charts provided in the experiment to determine the approximate concentration of the macromolecule(s) present in the unknown solution.
To know more about distilled water refer here:
https://brainly.com/question/23802525
#SPJ11
what are the two difference between cymose and racemose
Cymose and Racemose are two different types of inflorescence in plants. The main differences between them are:
Growth Pattern: Cymose inflorescence is determinate, which means the growth of the main axis is limited and ends with a flower. On the other hand, racemose inflorescence is indeterminate, which means the main axis continues to grow and produces flowers at intervals.
Branching Pattern: Cymose inflorescence has a dichotomous or forked branching pattern, where each branch divides into two branches of equal size, which again divide into two, and so on. In contrast, racemose inflorescence has a unbranched or simple branching pattern, where the main axis produces flowers on lateral stalks without any further branching.
These differences in growth and branching pattern result in distinct shapes and structures of inflorescence in plants.
when u have to do a Heart bypass surgery how do u make ur veins function with your heart, like do u have to sew the veins with your heart? im confused
During a heart bypass surgery, the surgeon typically uses a blood vessel from another part of the patient's body, such as the chest, leg, or arm, to create a graft that bypasses the blocked or narrowed artery in the heart.
What is the purpose of using a blood vessel from another part of the patient's body during a heart bypass surgery, and how does it help to reduce the risk of a heart attack?
During a heart bypass surgery, the surgeon typically uses a blood vessel from another part of the patient's body, such as the chest, leg, or arm, to create a graft that bypasses the blocked or narrowed artery in the heart. This is done to improve blood flow to the heart muscle and reduce the risk of a heart attack.
The graft is typically attached to the coronary artery below the blockage, and then to a point on the aorta or another artery above the blockage. The surgeon will sew one end of the graft to the coronary artery and the other end to the aorta or another artery, essentially creating a detour around the blockage. The graft is often sutured in place using small stitches.
Once the surgery is complete, the heart is restarted and the patient is disconnected from the heart-lung machine. The graft should now be functioning properly, allowing blood to flow freely around the blockage and improving blood flow to the heart muscle.
To learn more about bypass surgery follow the given link: https://brainly.com/question/14867127
#SPJ1
What type of electrophoresis would be better to study the subunit structure of a protein, PAGE or SDS-PAGE？
The type of electrophoresis that would be better to study the "subunit structure of a protein" is SDS-PAGE. This is because SDS-PAGE separates proteins based on their molecular weight, allowing for the determination of the subunit structure of a protein.
SDS-PAGE, or Sodium Dodecyl Sulfate Polyacrylamide Gel Electrophoresis, is a type of electrophoresis that uses an anionic detergent, SDS, to denature proteins and give them a negative charge. This allows for the separation of proteins based on their molecular weight, as smaller proteins will move faster through the gel than larger proteins. In contrast, PAGE, or Polyacrylamide Gel Electrophoresis, separates proteins based on their charge and size. This can make it difficult to determine the subunit structure of a protein, as proteins with similar charges and sizes may not be separated.
Learn more about SDS-PAGE: https://brainly.com/question/30632679
#SPJ11
All protostomes have the following traits: (Choose all that apply) T
he blastopore becomes the mouth Radial symmetry Prokaryotic Lophophore used for feeding Eukaryotic Bilateral symmetry G
rowth via a molted exoskeleton
the blastopore becomes the anus
ectoderm
mesoderm
endoderm
Protostomes are a diverse group of invertebrate animals that includes insects, mollusks, and annelids, among others. They are characterized by several key traits that distinguish them from other animal groups.
All protostomes have the following traits:
These traits do not include the blastopore becoming the anus, ectoderm, mesoderm, or endoderm.
For more about protostomes:
https://brainly.com/question/823820
#SPJ11
Who was a German physician and microbiologist and was regarded as one of the main founders of modern bacteriology?
The German physician and microbiologist who is regarded as one of the main founders of modern bacteriology is Robert Koch.
Robert Koch is known for his work in isolating and identifying the specific microorganisms that cause diseases such as tuberculosis, cholera, and anthrax. He also developed techniques for growing bacteria in a laboratory setting, which allowed for further study and understanding of these microorganisms. Koch's work laid the foundation for modern bacteriology and greatly advanced the field of medical microbiology. He was awarded the Nobel Prize in Physiology or Medicine in 1905 for his contributions to the field.
For more such questions on Robert Koch, click on:
https://brainly.com/question/1136589
#SPJ11
Patient X is a 40 year old female reporting pain on the side of her right thigh. She ignored said pain, and 7 hours later, removed pus from an ingrown hair in the area. Cellulitis developed over the course of 8 hours in the same area approximately 6 cm x 11 cm. Pus is still extruding from the area. After 12 more hours, the area of cellulitis is now from hip to knee. Patient X goes to the doctor. Her intake report has all normal vital signs. Area of cellulitis is warm and red. No swollen lymph nodes observed. No pus was removed at the ingrown hair site during the visit. Patient X is referred to surgery, given IM ceftriaxone and oral cephalexin. After 48 hours, there is now fluctuance near the ingrown hair site and patient has a low grade fever. Pus is extracted for gram stain and culture. Incision and drainage of the site followed. Results showed a gram positive, coagulase positive, coccus microbe. Blood agar plates showed colonies with beta-hemolysin. 5. When the culture results returned the physician changed his antimicrobial therapy. Why?
It is most likely that the physician changed his antimicrobial therapy because another therapy (based on the newest culture result) is more effective than the previous therapy.
The physician changed the antimicrobial therapy because the results of the gram stain and culture showed that the microbe causing the infection was a gram-positive, coagulase-positive, and coccus microbe. This indicates that the infection is likely caused by Staphylococcus aureus, a common cause of skin infections. The presence of beta-hemolysin on the blood agar plates also supports this diagnosis.
Staphylococcus aureus is known to be resistant to certain antibiotics, so the physician likely changed the antimicrobial therapy to a different antibiotic that is more effective against this type of bacteria. It is important to use the appropriate antibiotic in order to effectively treat the infection and prevent further complications.
Learn more about antimicrobial therapy at https://brainly.com/question/19923527
#SPJ11
Please answer the question in the image
I’ll mark you the Brainliest if you answer first. Should be right tho
Stages of reproduction and development of an animal include:
(3) C(2) cleavage(3) F(3) B(1) fertilizationWhat is a cleavage in embryology?In embryology, cleavage refers to a series of rapid cell divisions that occur in the early stages of embryonic development. During cleavage, the zygote, which is a single cell formed from the fusion of an egg and sperm, undergoes multiple rounds of mitotic cell division to produce a cluster of smaller, identical cells called blastomeres.
These cell divisions occur without an increase in the size of the embryo, resulting in a ball of cells called a morula. Cleavage is an essential process that divides the cytoplasmic volume of the zygote into progressively smaller cells and sets the stage for later stages of development such as gastrulation and differentiation.
Learn more on cleavage here: https://brainly.com/question/30400837
#SPJ1
Please help m it’s urgent
Explanation:
Nucleus - both
cell wall - plant cell
cell membrane - both
golgi apparatus - both
mitochondria - both
Centriole - animal cell
chloroplast - plant cell
cytoplasm - both
lysosome - both
ER - both
Generally used in compound microscope where light is either passed through or reflected off a specimen; Illumination is not altered by devices that alter the property of light. is called?
The type of illumination that is generally used in a compound microscope, where light is either passed through or reflected off a specimen without being altered by devices that alter the property of light, is called Brightfield Illumination.
Brightfield Illumination is the most common form of illumination used in compound microscopes. It involves the use of a bright light source, such as a halogen lamp, to illuminate the specimen.
The light passes through the specimen and is then collected by the objective lens to form an image. Because the illumination is not altered by any devices, the image produced is a true representation of the specimen.
In contrast, other forms of illumination, such as Darkfield Illumination and Phase Contrast Illumination, involve the use of devices that alter the property of light in order to produce an image with enhanced contrast or detail.
These forms of illumination are used for specimens that are difficult to see with Brightfield Illumination, such as transparent or colorless specimens.
To know more about Brightfield Illumination here:
https://brainly.com/question/28019837#
#SPJ11