Answer:
[tex]P=6.10atm[/tex]
Explanation:
Hello,
In this case, we can study the ideal gas equation that relates temperature, volume, pressure and moles as shown below:
[tex]PV=nRT[/tex]
Thus, since we are asked to compute the pressure y simply solve for it as follows:
[tex]P=\frac{nRT}{V}=\frac{11.1mol*0.082\frac{atm*L}{mol*K}*300K}{44.8L}\\ \\P=6.10atm[/tex]
Best regards.
compare the C2-C3 bonds in propane,propene, and propane.Should they be any different with respect to either bond length or bond strength?If so,how should they vary.
Answer: one by one
Explanation:
Which of the following is an endothermic process? Question 1 options: work is done by the system on the surroundings heat energy flows from the system to the surroundings work is done on the system by the surroundings heat energy is evolved by the system none of the abo g
Answer:
work is done on the system by the surroundings
Explanation:
An endothermic process is any process in which energy is absorbed by the system from the surrounding, usually in the form of heat energy. Energy intake is usually associated with bond braking, and the energy from the surrounding goes into breaking the chemical bond between atoms int the reaction. The quantity of heat absorbed in any endothermic process can be calculated for by analyzing the Gibbs free energy of the reaction system. Endothermic process is mostly associated with heat energy intake by the system from the surrounding, but can also be used to refer to any system that undergoes any form of energy input into the system, from the surrounding even in the form of work.
what is the osmotic pressure of pure water
Answer:
The osmotic pressure of ocean water is about 27 atm.
Explanation:
Pure water is water that contains no impurities. Ocean water is 96.5% pure with only about 3.5% of its content, salt water.
Osmotic pressure occurs when solutions that have different concentrations are isolated by a membrane. This osmotic pressure makes water move towards the solution that has the highest concentration, which means that if the concentration or temperature of the solution is high, the osmotic pressure becomes higher.
The equation for osmotic pressure is pi = iMRT.
What word or two-word phrase best describes the shape of the water ( H2O ) molecule?
Answer:
Water (H2O) is an inorganic chemical compound formed by two hydrogen (H) and one oxygen (O) atoms. 3 This molecule is essential in the life of living beings, serving as a medium for the metabolism of biomolecules, is found in nature in its three states and was key to its formation. It is necessary to distinguish between drinking water and pure water, since the first is a mixture that also contains salts in solution; this is why in the laboratory and in other areas distilled water is used.
Explanation:
I hope I've helped
According to the molecular geometry, the V-shape or bent structure best describes the shape of water molecule.
What is molecular geometry?Molecular geometry can be defined as a three -dimensional arrangement of atoms which constitute the molecule.It includes parameters like bond length,bond angle and torsional angles.
It influences many properties of molecules like reactivity,polarity color,magnetism .The molecular geometry can be determined by various spectroscopic methods and diffraction methods , some of which are infrared,microwave and Raman spectroscopy.
They provide information about geometry by taking into considerations the vibrational and rotational absorbance of a substance.Neutron and electron diffraction techniques provide information about the distance between nuclei and electron density.
Learn more about molecular geometry,here:
https://brainly.com/question/24232047
#SPJ3
Night vision glasses detect
energy emitted from cooling objects?
ultraviolet
infrared
X-ray
Answer:
I think the answer is " Night vision glasses detect Infrared" energy emitted from cooling objects.
Explanation:
1. Methanol is a high-octane fuel used in high performance racing engines. 2 CH3OH(l) + 3O2(g) → 2CO2(g) + 4 H20(g) a) Calculate ∆H० and ∆S० using thermodynamic data, and then ∆G
Answer:
The reaction given in the question is:
2CH₃OH (l) + 3O₂ (g) ⇒ 2CO₂ (g) + 4H₂O (g)
The values of ΔH°formation and ΔS° of the reactants and products given in the reaction based on the thermodynamics data is:
ΔH°formation values of CH3OH (l) is -238.4 kJ/mol, CO2(g) is -393.52 kJ/mol, H2O (g) is -241.83 kJ/mol and O2 (g) is 0.
The S° values of CH3OH (l) is 127.19 J/molK, CO2(g) is 213.79 J/molK, H2O (g) is 188.84 J/moleK, and O2 (g) is 205.15 J/molK.
Now the values of ΔH° and ΔS° are,
ΔH°rxn = 2 * ΔH°formation CO2 (g) + 4 * ΔH°formation H2O (g) - 2*ΔH°formation CH3OH (l)
ΔH°rxn = 2 * (-393.52) + 4 (-241.83) -2 * (-238.4)
ΔH°rxn = -1277.56 kJ/mole
ΔS°rxn = 2 * S° CO2 (g) + 4 * S° H2O (g) - 2*S° CH3OH (l) - 3 * S° O2 (g)
ΔS°rxn = 2 * 213.79 + 4 * 188.84 - 2 * 127.19 - 3*205.15
ΔS°rxn = 313.11 J/mole/K
Now the formula for calculating ΔG°rxn is,
ΔG°rxn = ΔH°rxn - TΔS°rxn
ΔG°rxn = -1277.56 * 1000 J/mole - 298 * 313.11 J/mole
ΔG°rxn = -1370.86 kJ/mol
Fe3+(aq)+6H2O(l)⇌Fe(H2O)63+(aq) : F e 3 + ( a q ) + 6 H 2 O ( l ) ⇌ F e ( H 2 O ) 6 3 + ( a q ) : blank is the Lewis acid and blank is the Lewis base. is the Lewis acid and F e 3 + ( a q ) + 6 H 2 O ( l ) ⇌ F e ( H 2 O ) 6 3 + ( a q ) : blank is the Lewis acid and blank is the Lewis base. is the Lewis base.
Answer:
Lewis acid- Fe3+
Lewis base- water molecule
Explanation:
Acids and bases have been defined in diverse ways. There have been definitions put forward by Arrhenius, Brownstead and Lowry as well as Lewis. Each definition his useful in its own way.
Lewis acids are lone pair acceptors such as metal ions. This implies that in the particular instance of this reaction, Fe3+ is the lewis acid.
Similarly, a Lewis base is a lone pair donor, all ligands are lone pair donors since they donate one or more lone pairs of electrons to Lewis acids. In the particular instance of this reaction, the Lewis base is the water molecule.
The branch of science which deals with the chemicals bond is called chemistry.
The correct answer is Lewis acid [tex]Fe^{3+[/tex] and the lewis base is a water molecule.
Those chemicals which release the H+ ion when reacting with water are called acids. Those chemicals which release OH- ion, when reacted with the water is called a base. These definitions are given by the Lewis
Lewis acids are lone pair acceptors such as metal ions. This implies that in the particular instance of this reaction, Fe3+ is the lewis acid.
Similarly, a Lewis base is a lone pair donor, all ligands are lone pair donors since they donate one or more lone pairs of electrons to Lewis acids. In the particular instance of this reaction, the Lewis base is the water molecule.
Hence, the correct answer is Fe3+.
For more information, refer to the link:-
https://brainly.com/question/25026730
Draw the Lewis structure of acetaldehyde (CH₃CHO) and then choose the appropriate pair of molecular geometries of the two central atoms.
a) tetrahedral/trigonal pyramidal.
b) trigonal planar / linear.
c) tetrahedral / trigonal planar.
d) trigonal/tetrahedral.
e) planar /trigonal planar.
Given that,
Draw the Lewis structure of acetaldehyde (CH₃CHO).
We know that,
The Lewis structure shows the number of electrons around an atom.
According to structure,
We need to find the molecular geometries of the two central atoms
Using molecular geometries
For first central atom,
Number of bond pair = 2
Here, double bond to O count as single bond
The number of lone pair is zero.
The geometry is Trigonal planar.
For second central atom,
Number of bond pair = 4
The number of lone pair is zero.
The geometry is tetrahedral
Hence, The molecular geometries of the two central atoms are trigonal planar and tetrahedral.
(d) is correct option.
The central carbon atoms in acetaldehyde have a tetrahedral geometry and a trigonal planar geometry respectively.
Acetaldehyde has two central carbon atoms. The Lewis structure of acetaldehyde shows the arrangement of electrons around the atoms in the compound. The lone pairs are shown as dots while the bond pairs are represented using a single dash.
The first central carbon atom in acetaldehyde has a tetrahedral geometry while the second central carbon atom in acetaldehyde has a trigonal planar geometry.
Learn more: https://brainly.com/question/7558603
A chemistry student weighs out of formic acid into a volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with solution. Calculate the volume of solution the student will need to add to reach the equivalence point. Round your answer to significant digits.
The given question is incomplete, the complete question is:
A chemistry student weighs out 0.0349g of formic acid HCHO2 into a 250.mL volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with 0.1500M NaOH solution. Calculate the volume of NaOH solution the student will need to add to reach the equivalence point. Round your answer to 3 significant digits.
Answer:
The correct answer is 5.06 ml.
Explanation:
Based on the given information, the weight of formic acid given is 0.0349 grams. The volume of formic acid of V1 given is 250 ml. The molecular mass of formic acid is 46 grams per mole. Now the molarity of formic acid will be,
[HCOOH] = weight * 1000 / molecular mass * volume (ml)
= 0.0349 * 1000 / 46 * 250
= 0.003035 M or M1
The molarity of NaOH given is 0.1500 M or M2
Let us assume that the volume needed to attain equivalence point is V2 ml. The volume V2 can be determined by using the dilution equation,
M1V1 = M2V2
V2 = M1V1/M2
V2 = 0.003035 * 250 / 0.1500
V2 = 5.06 ml.
Hence, the volume of NaOH needed is 5.06 ml.
If the distance between two objects increased, what would happen to the force of gravity between them? It would increase. It would stay the same. It would depend on the speed. It would decrease.
Answer:
it will decrease
Explanation:
force of gravity is inversely proportional to the distance
Answer:
It shall decrease! -w-ll
Explanation:
because of the gravitational pull
write down structures for three isomers of hexane
Answer:
Three isomers of hexane are: 2-methylpentane, 3-methylpentane, and 2,3-dimethylbutane.
They are constitutional isomers because they each contain exactly the same number and type of atoms, in this case, six carbons and 14 hydrogens and no other atoms.
Explanation:
Hope it helps.
For the reaction system, 2SO2(g) + O2(g) <--> 2SO3(g), the equilibrium concentrations are: SO3: 0.120M SO2: 0.860M O2: 0.330M Calculate the value of Kc for this reaction.
Answer:
0.0590 M⁻¹
Explanation:
Kc represents the equilibrium constant. It is given as;
Kc = [products] / [reactants]
For the reaction; 2SO2(g) + O2(g) <--> 2SO3
Products = SO3
Reactants = SO2 and O2
Kc is given as;
Kc = [SO3]² / [SO2]² [O2]
Kc = 0.120² / (0.860)² (0.330)
Kc = 0.0144 / 0.2440 = 0.0590 M⁻¹
If a radioactive isotope of thorium (atomic number 90, mass number 232) emits 6 alpha particles and 4 beta particles during the course of radioactive decay, what is the mass number of the stable daughter product?
Answer:
The mass number of the stable daughter product is 208
Explanation:
First thing's first, we have to write out the equation of the reaction. This is given as;
²³²₉₀Th → 6 ⁴₂α + 4 ⁰₋₁ β + X
In order to obtain the identity of X, we have to obtain it's mass numbers and atomic number.
There is conservation of matter so we expect the mass number to remain the same in both the reactant and products.
Mass Number
Reactant = 232
Product = (6* 4 = 24) + (4 * 0 = 0) + x = 24 + x
since reactant = product
232 = 24 + x
x = 232 - 24 = 208
Atomic Number
Reactant = 90
Product = (6* 2 = 12) + (4 * -1 = -4) + x = 8 + x
since reactant = product
90 = 8 + x
x = 90 - 8 = 82
Consider Zn + 2HCl → ZnCl2 + H2 (g). If 0.30 mol Zn is added to HCl, how many mol H2 are produced?
Answer:
0.3 mol
Explanation:
Assuming HCl is in excess and Zn is the limiting reagent,
from the balanced equation, we can see the mole ratio of Zn:H2 = 1:1,
which means, each mole of zinc reacted gives 1 mole of H2.
So, if 0.30 mol Zn is added, the no. of moles of H2 produced will also be 0.3 mol, since the ratio is 1:1.
Calculate the mass of feso4 that would be produced by 0.5mole of Fe
Answer:76 grams
Explanation:
Fe+H₂SO₄-->FeSO₄+H₂
For one mole of Fe we get 1 mole of feso4, therefore for 0.5 moles of Fe we get 0.5 moles of feso4.
The molar mass of feso4 is AFe+AS+4AO(A is atomic mass)
56+32+4*16=152grams/mole
Now, we need to multiply the number of moles by the molar mass to get the mass that reacts
152*0.5=76 grams
Which one of the following is most likely to gain electrons when forming an ion, based on the natural tendency of the element?
A Ni
B S
C Na
D Cr
E Be
Answer:
Option B. S
Explanation:
All of the options except sulphur, S is metal.
Metals tend to lose electron in order to form ion. Non metals on the other hand gain electron to form ion.
Sulphur, S has atomic number of 16 with electronic configuration as:
S (16) => 1s² 2s²2p⁶ 3s²3p⁴
From the above illustration, we can see that sulphur needs two more electrons to complete it's octet configuration.
Therefore, sulphur, S will gain two electrons to form ion.
As stated earlier, the rest option given are all metals which will form ion by losing electron(s).
Answer
B) Sulphur (S)
Explanation
Here in the options we have been provided with elements like Nickel (Ni), Sulphur (S), Sodium (Na), Chromium (Cr) and Beryllium (Be) but except for Sulphur all the other ones are metals.
Now, let us understand what is a metal and a non-metal.
Metal- electron donors are called as metal.Non-metal- electron acceptors are called non-metals.So, sulphur being the only non metal will accept electron to complete its octate and to stablize itself and form a Anion.
Now let us also look at the electronic configuration of Sulphur to get the picture more clearly
atomic no. of sulphur would be = 16[tex]S\rightarrow 1s^2\; 2s^2\;2p^6\;3s^2\;3p^4[/tex]
so here the p-subshell is incomplete and is in need of 2 electrons.
Therefore the element which is most likely to gain electrons, forming an Anion will be sulphur.
To learn more about Ion Formation
https://brainly.com/question/12740145
What compound is formed when 2,2-dimethyloxirane (2-methyl-1,2-epoxypropane) is treated with ethanol containing sulfuric acid
Answer:
2-ethoxy-2-methylpropan-1-ol
Explanation:
On this reaction, we have an "epoxide" (2-methyl-1,2-epoxypropane). Additionally, we have acid medium (due to the sulfuric acid [tex]H_2SO_4[/tex]). The acid medium will produce the hydronium ion ([tex]H^+[/tex]). This ion would be attacked by the oxygen of the epoxide. Then a carbocation would be produced, in this case, the most stable carbocation is the tertiary one. Then an ethanol molecule acts as a nucleophile and will attack the carbocation. Finally, a deprotonation step takes place to produce 2-ethoxy-2-methylpropan-1-ol.
See figure 1
I hope it helps!
What is the osmolarity of a 0.20 M solution of KCI?
A) 0.40 Osmol
B) 0.30 Osmol C) 0.20 Osmol D) 0.80 Osmol
E) 0.10 Osmol
Answer:
Osmolarity of solution of KCI = 0.40 osmol
Explanation:
Given:
KCL ⇒ K⁺ + Cl⁻
Find:
Osmolarity of solution of KCI
When M = 0.20 M
Computation:
1 mole of KCL = 2 osmol
1 M of KCl = 2 Osmolarity
So,
Osmolarity of solution of KCI = 2 × 0.20
Osmolarity of solution of KCI = 0.40 osmol
14. A piece of titanium at 100.0°C was dropped into 50.0 g of water at 20.0°C. The final temperature of the system was 22.6°C. What is the mass of the titanium? (Specific Heat of titanium = 0.54 J/g°C)
Answer:
[tex]m_{Ti}=13.0g[/tex]
Explanation:
Hello,
In this case, based on the given, we can infer that as titanium is hot and water cold, it cools down whereas the water is heated up, therefore, in terms of heat, we have that the heat lost by the titanium is gained by the water:
[tex]-Q_{Ti}=Q_{H_2O}[/tex]
That in terms of mass, specific heat and temperatures is:
[tex]-m_{Ti}Cp_{Ti}(T_2-T_{Ti})=m_{H_2O}Cp_{H_2O}(T_2-T_{H_2O})[/tex]
In such a way, for computing the mass of titanium, considering the heat capacity of water 4.18 J/g°C, we have:
[tex]m_{Ti}=\frac{m_{H_2O}Cp_{H_2O}(T_2-T_{H_2O})}{-Cp_{Ti}(T_2-T_{Ti})} \\\\m_{Ti}=\frac{50.0g*4.18\frac{J}{g\°C}(22.6-20.0)\°C}{-0.54\frac{J}{g\°C}*(22.6-100.0)\°C} \\\\m_{Ti}=13.0g[/tex]
Regards.
What does the state symbol (aq) mean when written after a chemical
compound in a chemical equation?
A. It means the compound is in the liquid phase.
B. It means the compound is dissolved in water.
C. It means the compound is in the gas phase.
D. It means the compound is in the solid phase.
B. it means the compound is dissolved in water
Answer:
b
Explanation:
a p e x :)
what is the IUPAC name of NaHCO3
please tell me the formula for these types of questions
Answer:
The half life of the radio - active isotope is 8 hours
Explanation:
We can tell that half - life of this radio - active isotope will be the time span with which 100 cpm of the substance remains, as half of 100 cpm is 200 cpm. When 25 cm remains it takes the duration of 24 hours / 1 day.
25 cm / 200 cm = 1 / 8
Therefore 1 / 8 of the substance remains after 24 hours. We want to calculate the time it takes for 1 / 2 of the substance to remains, which should clearly be less than 24 hours,
1 / 2 [tex]*[/tex] 1 / 2
24 / 3 = 8 hours - three half lives fit into 1 / 8, and hence 24 / 3 = 8 hours. We can check this solution by considering this 8 hours. After 8 hours one - half of the substance remains, or 100 cpm. After another 8 hours one - half of 100 cpm remains, or 50 cpm. And after another 8 hours one - half of 50 cpm remains, or 25 cpm. 3, 8 hours is a duration of 24 hours - the remaining amount being 25 cpm.
What effect does reducing your carbon footprint have on the environment?
increases the greenhouse effect
O reduces the greenhouse effect
O more re-radiated infrared radiation is trapped
O more incoming radiation is let through the atmosphere
Answer:
reduces the greenhouse effect
Which of the following statements about metal elements is correct?
A. Metals tend to easily gain more valence electrons.
B. Metal elements are always heavier than non-metal elements.
C. Metals tend to easily lose their valence electrons.
D. A metal atom can take an electron from a non-metal atom.
Answer: C. Metals tend to easily lose their valence electrons.
Explanation:
Metals are those substances which have tendency to loose their valence electrons to attain noble gas configuration and forms positive ions called as cations.
Example: Gold, potassium etc
[tex]M\rightarrow M^++e^-[/tex]
Non metals are those substances which have tendency to gain valence electrons to attain noble gas configuration and form negative ions called as anions.
Example: Sulphur, Chlorine
[tex]N+e^-\rightarrow N^-[/tex]
Write a balanced equation for the double-replacement precipitation reaction described, using the smallest possible integer coefficients. A precipitate forms when aqueous solutions of ammonium bromide and silver(I) nitrate are combined. (Use the lowest possible coefficients. Omit states of matter.)
Answer:
NH4Br + AgNO3 —> AgBr + NH4NO3
Explanation:
When ammonium bromide and silver(I) nitrate react, the following are obtained as shown below:
NH4Br(aq) + AgNO3(aq) —>
In solution, NH4Br(aq) and AgNO3(aq) will dissociate as follow:
NH4Br(aq) —> NH4+(aq) + Br-(aq)
AgNO3(aq) —> Ag+(aq) + NO3-(aq)
The double displacement reaction will occur as follow:
NH4+(aq) + Br-(aq) + Ag+(aq) + NO3-(aq) —> Ag+(aq) + Br-(aq) + NH4+(aq) + NO3-(aq)
NH4Br(aq) + AgNO3(aq) —> AgBr(s) + NH4NO3(aq)
If 10.4 grams of iron metal react with 28.4 grams of silver nitrate, how many grams of iron nitrate can be formed and how many grams of the excess reactant will be left over when the reaction is complete? Show all of your work. unbalanced equation: Fe + AgNO3 Fe(NO3)3 + Ag
Answer:
71.1
Explanation:
1 mol Fe = 10.4 g/55.85 g/mol = 0.186
1 mol AgNo3 = 28.4 g/169.87 g/mol = 0.178 mol AgNo3
then since Ag:Fe is 1:3, AgNo3 is the limiting reactant
So now
0.178 moles * 1/3 * 241.83 g/mol Fe(NO3)3 = 14.35 g Fe(NO3)3
Excess reactant: 0.178 moes AgNO3 * 1/3 = 0.059
0.186 - 0.059 = 0.127 moles Fe * 55.85 g/mol Fe = 7.1 g Fe excess
1. (2 pts) How does the wavelength of a radio wave relate to its frequency? a.) The wavelength gets longer as the frequency increases b.) The wavelength gets shorter as the frequency increases c.) There is no relationship between wavelength and frequency d.) The wavelength depends on the bandwidth of the signal 2. (2 pts) List the following EMR in the order of increasing wavelength starting with the lowest: Infrared radiation Ultraviolet radiation X-rays Visible light 3. (3 pts) Green light has a wavelength of 5.0 x 102 nm. What is the energy, in joules, of ONE photon of green light? What is the energy, in joules of 1.0 mol of photons of green light?
Answer:
1. b.) The wavelength gets shorter as the frequency increases
2. X-rays < Ultraviolet radiation < Visible light < Infrared radiation
3. 2 × 10⁵ J
Explanation:
1. Wavelength vs frequency
fλ= c
f = c/λ
Thus, frequency and wavelength are inversely proportional.
The wavelength increases (gets longer) as the frequency decreases.
2. Order of increasing wavelength
X-rays < Ultraviolet radiation < Visible light < Infrared radiation
3. Energy of green light
(a) Energy of 1 photon
λ = 5 × 10² nm = 5 × 10² × 10⁻⁹ m = 5 × 10⁻⁷ m
fλ = c
f = c/λ = (2.998 × 10⁸ m·s⁻¹)/(5 × 10⁻⁷ m) = 6 × 10¹⁴ s⁻¹
E = hf = 6.626 × 10⁻³⁴ J·s × 6 × 10¹⁴ s⁻¹ = 4 × 10⁻¹⁹ J
(b) Energy of 1.0 mol of photons
[tex]\text{Energy} = \text{1.0 mol photons} \times \dfrac{6.022 \times 10^{23}\text{ photons }}{\text{1 mol photons }} \times \dfrac{4 \times 10^{-19}\text{ J}}{\text{1 photon }} = \mathbf{2 \times 10^{5}} \textbf{ J}\\\\\text{The energy of 1.0 mol of photons of green light is $\large \boxed{\mathbf{2 \times 10^{5}}\textbf{ J}}$}[/tex]
Note: The answer can have only one significant figure because that is all you gave for the wavelength of the light.
Which of the following is a property of salts? Undergo combustion Do not make ionic bonds easily Do not conduct electricity as solids Formed due to reaction of acid with water
Answer:
Do not conduct electricity as solids.
Explanation:
Hello,
In this case, we should remember that salts are formed when an acid and base react in order to yield the salt and water due to the ions exchange during neutralization chemical reactions. For instance, when hydrochloric acid (acid) reacts with potassium hydroxide (base), sodium chloride (salt) and water are yielded via:
[tex]HCl+NaOH\rightarrow NaCl+H_2O[/tex]
Moreover, it is widely known that salts are formed by electrovalent/ionic bonds which involves electron transfer so the metallic atom becomes positively charged (cation) whereas the non-metallic atom becomes negatively charged (anion) once the electrons are received so it can conduct electricity when dissolved in water yet not when solid since electron transfer is facilitated by the aqueous media, otherwise, ions remain together. Thereby, answer is do not conduct electricity as solids.
Regards.
Answer:
c
Explanation:
How many milliliters of a 0.250 MNaOHMNaOH solution are needed to completely react with 500. gg of glyceryl tripalmitoleate (tripalmitolein)
Answer:
[tex]7.48X10^3~mL[/tex]
Explanation:
For this question we have:
-) A solution NaOH 0.25 M
-) 500 g of glyceryl tripalmitoleate (tripalmitolein)
We can start with the reaction between NaOH and tripalmitolein. NaOH is a base and tripalmitolein is a triglyceride, therefore we will have a saponification reaction. The products of this reaction are glycerol and (E)-hexadec-9-enoate.
Now, with the reaction in mind, we can calculate the moles of NaOH that we need if we use the molar ratio between NaOH and tripalmitolein (3:1) and the molar mass of tripalmitolein (801.3 g/mol). So:
[tex]500~g~tripalmitolein\frac{1~mol~tripalmitolein}{801.3~g~tripalmitolein}\frac{3~mol~NaOH}{1~mol~tripalmitolein}=1.87~mol~NaOH[/tex]
With the moles of NaOH we can calculate the volume (in litters) if we use the molarity equation and the Molarity value:
[tex]M=\frac{mol}{L}[/tex]
[tex]0.25~M=\frac{1.87~mol~NaOH}{L}[/tex]
[tex]L=\frac{1.87~mol~NaOH}{0.25~M}[/tex]
[tex]L=7.48[/tex]
Now we can do the conversion to mL:
[tex]7.48~L~\frac{1000~mL}{1~L}=~7.48X10^3~mL[/tex]
I hope it helps!
Which is most likely to happen during a precipitation reaction?
A. A solid substance will break down into two new substances that
are gases.
B. An insoluble solid will form when ions in dissolved compounds
switch places.
C. A substance will react with oxygen to form water and carbon
dioxide.
D. A gas will form when positive ions switch places to form new
compounds.
Answer:
I think its B
Explanation:
Precipitation reactions leave a solid behind. The solid is called a precipitate.
Answer:
B
Explanation:
An insoluble solid will form when ions in dissolved compounds switch places.