At a certain temperature, the p
for the decomposition of H2S
is 0.819.


H2S(g)↽−−⇀H2(g)+S(g)

Initially, only H2S
is present at a pressure of 0.225 atm
in a closed container. What is the total pressure in the container at equilibrium?

The energy, size, orientation, or spin of an electron within an atom are all described by quantum numbers. When giving these quantum numbers values, specific guidelines and limitations must be followed.

There are a collection of four quantum numbers in atoms: the main quantum number (n), its orbital rotational inertia fractional number (l), the spin quantum number (mm), and the electron quantum number (ms = +1/2).

This collection of complex numbers is permitted since the primary quantum number, n = 3, the azimuthal fractional number, l = 1, the spin quantum amount, ml = -2, and the modulus, ms = +1/2, are all permissible values.

n=4, l=3, ml=-1, and ms=-1/2

This set set quantum numbers is permitted because the main quantum number, n, has a valid value of 4, the azimuthal fractional number, l, a valid value of 3, the spin quantum number, ml, a valid value of 1, and the spin quantum number, ms, a valid value of -1/2.

To know more about quantum numbers visit:

https://brainly.com/question/18835321

#SPJ1

One mole of H₂ reacts with one mole of Cl₂ to give 2 moles of hydrogen chloride gas. The volume of H₂ that will completely react with Cl₂ is 22.4 litres.

In the International System of Units, the mole is the unit of amount of a substance. It is specified that the mole contains exactly 6.022 * 10²³ elementary particles such as atoms, ions or molecules, similar to how a dozen denotes twelve.

At standard temperature and pressure (STP), one mole of any gas occupies a volume of 22.4 litres. From the given equation, the molar ratio of hydrogen and chlorine is 1:1. Since 22.4 litres of chlorine gas is used, then similarly, 22.4 litres of hydrogen gas must also be used up to give 2 moles of the product, hydrogen chloride gas.

To find out more about STP conditions, visit:

https://brainly.com/question/29129606

#SPJ1

The correct answers are given below, based on the given prompt:

Nickel as it is not an element in amoxicillin's molecular structure. Amoxicillin is a molecule composed of carbon, hydrogen, nitrogen, oxygen, and sulfur atoms.

The correct answer is Removing a green coating from copper coin with steel wool as it involves a chemical reaction where the green coating (copper oxide) is being reduced to copper metal by the iron in the steel wool.

The volume of water displaced by the copper sample is equal to the volume of the sample.

Using the density of copper (8.96 g/mL), the volume of the copper sample can be calculated as 183.4 g / 8.96 g/mL = 20.46 mL.

Thus, the new volume reading in the graduate cylinder is 35.4 mL + 20.46 mL = 55.86 mL or 56.0 mL (rounded to the nearest tenth).

Read more about atoms here:

https://brainly.com/question/6258301

#SPJ1

Answer:

It does not have an overall charge, and is a neutral molecule. For free elements, the oxidation number is zero. Hence, the oxidation number of hydrogen in ${H_2}$ is zero as well. Some examples of free elements having zero oxidation state are: $Na,\,Fe,\,{O_2},\,{S_8}$ et cetera.

Explanation:

To determine the density and identity of the metal, we need to first calculate the volume of the metal object, and then use its mass and volume to calculate the density.

The volume of the metal object can be calculated by measuring the change in the volume of the water in the graduated cylinder before and after the object was placed in it. The difference between the final volume (106.2 mL) and the initial volume (100.0 mL) is equal to the volume of the metal object.

Volume of metal object = final volume - initial volume

Volume of metal object = 106.2 mL - 100.0 mL

Volume of metal object = 6.2 mL

Next, we can calculate the density of the metal using the formula:

Density = mass / volume

Substituting the values we have:

Density = 16.7 g / 6.2 mL

Density = 2.69 g/mL

The density of the metal is 2.69 g/mL.

To identify the metal, we can compare its density to the densities of known metals. A quick search shows that the density of aluminum (Al) is around 2.7 g/mL, which is close to the calculated density of the metal in question. Therefore, it is possible that the metal object is made of aluminum. However, we cannot be certain without further testing.

If 25.82 mL of 0.0500 M NaOH solution are required to reach the equivalence point of an acid-base titration of 40.0 mL of 7-Up, the number of NaOH required is 0.00126 moles.

The point at which chemically identical amounts of reactants are put together is known as the equivalence point in a chemical reaction.

In other words, during titration, it is the point at which the titrant addition is sufficient to totally neutralize the analyte solution. The number of moles of a solution with an unknown concentration is equal to the number of moles of a titrant, or standard solution. Because it is a point where the amount of acid and base required to neutralize a solution is equal, it is often referred to as the stoichiometric point. It should be noted that the acid to base ratio need not be 1:1. The balanced acid-base chemical equation explains this acid-base ratio. For this, indicators might be used, for example, phenolphthalein or methyl orange.

The reaction between citric acid and NaOH is,

H₃C₆H₅O₇(aq) + 3NaOH(aq) →   Na₃C₆H₅O₇(aq) + 3H₂O(l)

According to the formula,

M = [tex]\frac{n}{V}[/tex]

where,

M is the molarity,

n is the number of moles and,

V is the volume(L)

For NaOH;

M = 0.0500 M

V = 25.82ml = 0.02582 l

n = M × V

n = 0.00126 moles

To know more about acid-base titration, visit;

https://brainly.com/question/2728613

#SPJ1

The mass of oxygen produced when 1.840 mol of H2O2 decomposes is 29.44g and the mass of water produced when 5.0 mol O, is produced by this reaction is 180.02g.

Given  that the Hydrogen peroxide breaks down, releasing oxygen as:

[tex]2H2O2(g) -- > 2H2O(1) + O2(g)[/tex]

a.) The mass of oxygen is produced = m

Given the number of moles of H2O2 = 1.840

We know  The molecular weight of H2O2 is  = 34.01 g/mol

the molecular weight of O2 is = 32.00 g/mol.

We know that number of moles is equal to mass of substance divided by its molar mass such that:

number of moles of O2 = 1.840 mol H2O2 x (1 mol O2 / 2 mol H2O2)

The mass of O2 =  0.920 mol O2 * 32 g/mol O2 = 29.44g

b.) Given the number of moles of O = 5.0

Then number of moles of H2O produced = 5.0 mol O2 x (2 mol H2O / 1 mol O2) = 10 mol H2O

mass of H2O produced =  10 mol H2O * (18.02 g H2O / 1 mol H2O) = 180.02 g H2O

To learn more about moles click here https://brainly.com/question/26416088

#SPJ1

The following chemical equation can represent the reaction:

Mg (s) + FeSO4 (aq) → MgSO4 (aq) + Fe (s)

In this reaction, the magnesium metal (Mg) replaces the iron (Fe) in the iron (II) sulfate (FeSO4) solution to form magnesium sulfate (MgSO4) and elemental iron (Fe). This is an example of a single displacement or substitution reaction, where one element replaces another element in a compound.

A catalyst is a substance that increases the rate of a chemical reaction by lowering the activation energy required for the reaction to occur. Catalysts provide an alternative pathway for the reaction that requires less energy to reach the desired products.

Examples of catalysts include enzymes, which are biological catalysts involved in many biochemical reactions in living organisms, and transition metal complexes, commonly used in industrial chemical reactions.

To learn more about pH, visit here:

https://brainly.com/question/15289741

#SPJ1

Hydroiodic acid - HI

Chloric acid - HClO3

Nitrous acid - HNO2

H2CO3 - Carbonic acid

HClO4 - Perchloric Acid

CH3COOH - Acetic acid

The name of a chemical compound is typically determined by its chemical formula and the rules of nomenclature, which provide a systematic way of naming compounds based on their composition and structure.

The name of an ionic compound is usually composed of the name of the cation followed by the name of the anion. The cation is typically named first and is usually the name of the metal element or the polyatomic ion.

Learn more about chemical compound:https://brainly.com/question/12166462

#SPJ1

Phosphate of sodium: Nitrate of zinc, Na3PO4, Zn(No3)2, bromate of barium: Perchlorate of iron (II) and ba(BrO3)2: Cobalt (II) hydrogen carbonate, Fe(ClO4)2: Co(HCO3)2.

Hydrogen acetate, also known as acetic acid, is the simplest of these, consisting of its salts, esters, and the polyatomic anion CH3CO2, or CH3COO.

Potassium dichromate is the chemical name of an inorganic chemical reagent known as K2Cr2O7. Dipotassium bichromate and potassium bichromate are other names for it. It is a bright reddish-orange crystalline ionic solid. It has no odor and is insoluble in alcohol and acetone, but it dissolves in water.

To know more about Perchlorate visit :-

https://brainly.com/question/16895150

#SPJ1

The molar volume would be impacted too high. Therefore, option C is correct.

The molar volume (Vm) is the volume occupied by one mole of a chemical element or chemical compound at standard temperature and pressure (STP). You may figure it out by dividing the mass density (ρ) by the molar mass (M). It has the S.I. unit cubic meters per mole.

Thus, if a lab partner had allowed some of the water to siphon into the collection beaker before starting to heat the sample, the molar volume would be impacted too high. Therefore, option C is correct.

Learn more about molar volume, here:

https://brainly.com/question/29884686

#SPJ1

The correct mass of potassium iodide added to the flask is 35g. To calculate the mass of potassium iodide added to the flask, we need to use the formula

mass = volume x concentration x molar mass

volume = 0.10 L (given)

concentration = 2.1 M (given)

molar mass of KI = 166.0028 g/mol (from periodic table)

Substituting these values in the formula, we get:

mass = 0.10 L x 2.1 mol/L x 166.0028 g/mol = 35.001484 g

Rounding off to the correct number of significant digits (two), the mass of potassium iodide added to the flask is:

mass = 35 g (rounded to two significant digits)  

To know more about Mass , visit :

https://brainly.com/question/20887747

#SPJ9

This means that the ratio of anhydrous compound to water in the hydrate is 1:2. Therefore, the value of "n" in the hydrate formula is 2.

To determine the value of "n" in the hydrate formula, we need to use the given information to calculate the number of moles of anhydrous compound and water in the sample, and then use the mole ratio between them to determine the value of "n".

First, we can calculate the number of moles of anhydrous compound:

moles of anhydrous compound = mass / molar mass

moles of anhydrous compound = 85.25 g / 208 g/mol

moles of anhydrous compound = 0.4091 mol

Next, we can calculate the number of moles of water:

moles of water = mass / molar mass

moles of water = 14.75 g / 18.015 g/mol

moles of water = 0.8180 mol

Anhydrous Compound - nH₂O

The mole ratio between the anhydrous compound and water is:

moles of anhydrous compound : moles of water

0.4091 mol : 0.8180 mol

We can simplify this ratio by dividing both sides by the smaller value:

0.4091 mol / 0.4091 mol : 0.8180 mol / 0.4091 mol

1 : 2

To know more about anhydrous compound visit:-

brainly.com/question/27078278

#SPJ1

According to the question the partial pressure of nitrogen is 704.7 mmHg.

Pressure is a physical quantity that describes the amount of force applied to an object per unit area. It is measured in units of force per unit area, such as pascals (Pa) or pounds per square inch (psi). Pressure is an important factor in many scientific fields such as thermodynamics, fluid dynamics, and mechanics. Pressure is also a measure of how much energy is stored in a given material or system. Pressure is a scalar quantity, meaning that it has a magnitude but no direction. Pressure can be created by a number of sources, such as gravity, the exertion of force, and the application of heat.

The partial pressure of nitrogen is equal to the total pressure of the system minus the vapor pressure of water vapor. In this case, the total pressure is 760.0 mmHg, and the vapor pressure of water at 40°C is 55.3 mmHg. Thus, the partial pressure of nitrogen is:

Partial pressure of nitrogen = 760.0 mmHg - 55.3 mmHg = 704.7 mmHg

To learn more about pressure

https://brainly.com/question/25736513

#SPJ1

Mass of potassium nitrate is needed to generate 215.0 L of gas, composed of 111.0 L of N₂ and 104.0 L of O₂ at 0.920 atm and 291 K, using these two reactions is 1186.75 g.

Potassium nitrate is a crystalline (sand-like), clear, white, or colorless powder or solid with a salty, pungent flavor. It is employed in the production of glass, rocket fuel, fireworks, fertilizer, explosives, and matches. Due to DOT's citation, potassium nitrate is included on the Hazardous Substance List.

The reactions are :

2KNO₃ --->  2KNO₂  +  O₂

4KNO₂  ---->  2K₂O  + 3O₂  +  2N₂

Therefore,

4KNO₃  ---->  2K₂O  +   5O₂  +  2N₂

using the formula:

PV = nRT

moles of N₂ = PV / RT

P = 0.920 atm

T =287 K

R = 0.082 Latm/mol/k

moles of N₂ = 4.279 mol

moles of O₂ = (0.92 × 134) / 0.082 × 287 = 123.28 / 23.534

                    = 5.24 mol

from the equation .

moles of potassium nitrate to produce nitrogen = 2 × 4.279

                                                                                = 8.55 mol

moles of nitrate tp produce oxygen = (4 / 5) × 4

                                                            = 3.2 mol

total moles of nitrate = 8.55 mol + 3.2 mol

                                   = 11.75 mol

mass of potassium nitrate = number of moles × molar mass

                                            = 11.75 × 101

                                             = 1186.75 g

To learn more about moles here

brainly.com/question/20486415

#SPJ1

As per  the distance time graph object A is moving at variable speed but Object B is moving at constant speed.

The speed (commonly referred to as v) of an object is the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time; it is thus a scalar quantity. The average speed of an object in an interval of time is the distance travelled by the object divided by the duration of the interval;the instantaneous speed is the limit of the average speed as the duration of the time interval approaches zero. Speed is not the same as velocity.

Speed has the dimensions of distance divided by time. The SI unit of speed is the metre per second (m/s), but the most common unit of speed in everyday usage is the kilometre per hour (km/h) or, miles per hour (mph).

Learn more about speed,here:

https://brainly.com/question/17661499

#SPJ1

The molecular formula of a compound is a whole number multiple of its empirical formula. In molecular formula the actual number of atoms of various elements are depicted.

The empirical formula of a compound can be defined as the formula which gives the simplest whole number ratio of atoms of various elements present in one molecule of the compound.

Answer for Vth question:

a. C₅H₄

b. CH

Answer for VIth question:

a. Na₂SO₄ , Ca(NO₃)₂ = Reactants   CaSO₄ , NaNO₃ = Products

b. Mg , N = Reactants    Mg₃N₂ = Product

Answer for VIIth question:

a. 2Hg(NO₃)₂ (s) → 2HgO (s) + 4NO₂ (g) + O₂ (g)

To know more about empirical formula, visit;

https://brainly.com/question/14044066

#SPJ1

To find the molar mass of element X, we need to use the given information to determine the number of moles of oxygen in the sample, and then use that to calculate the number of moles of element X in the sample. Then we can divide the mass of the sample by the number of moles of element X to get the molar mass.

First, we need to calculate the number of moles of oxygen in the sample. We can use the molar mass of oxygen (16.00 g/mol) to convert the mass of oxygen atoms to moles:

moles of oxygen = mass of oxygen / molar mass of oxygen

moles of oxygen = 14.4 g / 16.00 g/mol

moles of oxygen = 0.900 mol

Next, we need to use the formula of X2O3 to determine the number of moles of element X in the sample. The formula indicates that there are 2 moles of element X for every 3 moles of oxygen in the compound. Therefore:

moles of X = 2/3 × moles of oxygen

moles of X = 2/3 × 0.900 mol

moles of X = 0.600 mol

Now we can use the mass of the sample and the number of moles of element X to calculate the molar mass of X:

molar mass of X = mass of sample / moles of X

molar mass of X = 30.6 g / 0.600 mol

molar mass of X = 51.0 g/mol

Therefore, the molar mass of element X is 51.0 g/mol.

According to the forces of attraction and kinetic theory of gases , the size and number of particles in the sample remains same while the average speed of the particles increases.

Forces of attraction  is a force by which atoms in a molecule  combine. it is basically an attractive force in nature.  It can act between an ion  and an atom as well.It varies for different states  of matter that is solids, liquids and gases.

The forces of attraction are maximum in solids as  the molecules present in solid are tightly held while it is minimum in gases  as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.

The physical properties such as melting point, boiling point, density  are all dependent on forces of attraction which exists in the substances.

Learn more about forces of attraction,here:

https://brainly.com/question/23841038

#SPJ2

Answer:

Let x = amount invested in certificate of deposit (in dollars)

Let y = amount invested in corporate bonds (in dollars)

Total amount invested = $100: x + y = 100

CD pays 2% per year, corporate bonds pay 4% per year, total return is 3% per year

Total return on investments = 3% of $100 = $3: 0.02x + 0.04y = 3

Simplifying the equations:

x + y = 100

2x + 4y = 300

Solving for x:

x + y = 100

x = 50

Therefore, the person should invest $50 in the certificate of deposit and $50 in corporate bonds to obtain an overall return of 3% per year.

Explanation:

Once equilibrium has been restored, we need to increase the amount of carbon monoxide to 0.300 mol by adding 0.343 mol of carbon dioxide at a fixed temperature and volume.

By measuring the rate of effusion through a pinhole, the composition of the equilibrium mixture (Cl2=2Cl), which is obtained at 1200 degrees Celsius, is ascertained. At 1.80 mm hg pressure, it is noted that the mixture emits 1.16 times more quickly than Krypton does at the same pressure.

The following is the expression for the reaction's equilibrium constant:

Kc = [CO2][H2] / [CO][H2O]

Do the equilibrium constant calculation:

Kc = [(0.250 mol/L)(0.250 mol/L)] / [(0.200 mol/L)(0.200 mol/L)]

= 1.5625 mol/L

The updated equilibrium concentrations of every species will be:

[CO2] = 0.250 + x mol/L

[H2] = 0.250 + x mol/L

[CO] = 0.300 mol/L

[H2O] = 0.200 + x mol/L

When we substitute these concentrations into the formula for the equilibrium constant, we obtain:

Kc = [(0.250 + x)(0.250 + x)] / [(0.300)(0.200 + x)]

Simplifying and solving for x, we get:

1.5625 = [(0.250 + x)(0.250 + x)] / [(0.300)(0.200 + x)]

4.6875(0.300 + x) = (0.250 + x)(0.250 + x)

1.40625 + 1.40625x = 0.0625 + 0.5x + x²

x² + 1.09375x - 1.34375 = 0

Using the quadratic formula, we get:

x = 0.343 mol

To know more about equilibrium visit:-

https://brainly.com/question/8770636

#SPJ1

The perchloric acid solutions has a concentration of 4.66 mol/L. How so much solute has been absorbed in the solvent is indicated by the solution's level of concentration.

The percentage of a material, like salt, that is present in a specific volume of a liquid or tissue, like blood. Less water is present, and the material becomes more concentrated. Whenever a person doesn't consume sufficient amounts of water, for instance, the salt concentration in their urine may increase.

Ba(OH)2 moles equal volume times concentration, or 23.4 mL times 0.100 mol/L, or 0.00234 mol.

We can deduce from the equation that m2 m of HClO4 react including one mole pf Ba(OH)2. Hence, the amount of moles of Concentrated h2so4 in the 4.66 mL aliquot could be calculated as

0.00234 mol Ba(OH)2 divided by 1 equals moles of HClO4. (1 mol Ba(OH)2 / 2 mol HClO4) 0.0217 mol is equal to (1 L / 1000 mL) (4.66 mL / 1)

The concentration of a perchloric acid can finally be determined as follows:

HClO4 concentration is calculated as follows: moles per liter = 0.0217 mol / 4.66 mL = 4.66 mol/L

To know more about Concentration visit:

https://brainly.com/question/10725862

#SPJ1

The structure of the compound is shown in the image attached

The molecular formula gives information about the types and number of atoms in the compound. This can be used to determine the possible functional groups and the degree of unsaturation (the number of rings or double bonds) in the compound.

When we look at the name of the compound, we can be able to tell the bonds and the substituents that we have in the compound and that would help us to deduce its structure.

Learn more about organic compound:https://brainly.com/question/5994723

#SPJ1

Answer:

He

P

Na

K

Rb

Cs

Explanation:

I am not sure if Na was one of the choices, but if it is this is the order. If not then just take out Na and then it is in the correct order.

The statement that is not true about what happens in all chemical reactions is as follows: the ways in which atoms are joined together are changed (option A).

Chemical reaction is a process, typically involving the breaking or making of interatomic bonds, in which one or more substances are changed into others.

A chemical reaction is different from physical change being that a chemical reaction involves the breaking of bonds in the substance called reactants to form new substances called products.

Characteristics of a chemical reaction are as follows:

Learn more about chemical reaction at: https://brainly.com/question/29039149

#SPJ1

The total pressure after the valve is opened and the gases mix is 6.875 kPa

What is ideal gas law?

The ideal gas law is a fundamental equation in physics and chemistry that relates the pressure, volume, temperature, and number of molecules of an ideal gas. The equation is expressed mathematically as:

PV = nRT

To find the total pressure after the valve is opened and the gases mix, we can use the ideal gas law, which states:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. Assuming the temperature is constant and the gases behave ideally, we can write:

(P₁V₁+ P₂V₂) / (V₁+ V₂) = Ptotal

where P1 and V1 are the pressure and volume of the oxygen, P2 and V2 are the pressure and volume of the helium, and Ptotal is the total pressure after the valve is opened.

Plugging in the values, we get:

(P₁V1+ P₂V₂) / (V₁+ V₂) = Ptotal

((10kpa)(3L) + (5kpa)(5L)) / (3L + 5L) = Ptotal

(30kpa + 25kpa) / 8L = Ptotal

55kpa / 8L = Ptotal

Therefore, the total pressure after the valve is opened and the gases mix is 6.875 kPa (rounded to three significant figures).

To know more about chemical balancing visit :-

https://brainly.com/question/11904811

#SPJ9

Mechanical energy is the sum of the kinetic energy and the potential energy of an object, option C.

Mechanical energy is applied in systems where there is movement or force involved, such as machines, vehicles, and structures. It is the sum of an object's kinetic energy and potential energy due to its position or state of deformation.

Some examples of mechanical energy in use include a car engine converting fuel into mechanical energy to power the vehicle, a wind turbine converting wind energy into mechanical energy to generate electricity, and a roller coaster converting potential energy at the top of a hill into kinetic energy as it descends.

Learn more on mechanical energy here: https://brainly.com/question/24443465

#SPJ1