assume we have five (5) different web data structures, and we want to be able to translate each structure directly to other four (4) structures. how many converters we need to have? group of answer choices 4 8 10 20 40

In the primitive case of asymmetric encryption without a digital signature and digital envelope, a total of 2 keys are used to send and receive a single message.

One is the public key of the recipient (used for encryption), and the other is the private key of the recipient (used for decryption). The biggest benefit of asymmetric encryption is that it allows secure communication over insecure networks such as the internet. It enables the creation of digital signatures, which are used to confirm the authenticity of digital data. Furthermore, asymmetric encryption is more secure than symmetric encryption, which uses a single key for both encryption and decryption.

Learn more about asymmetric encryption: https://brainly.com/question/26379578

#SPJ11

With a /15 network address, you can create a maximum of 8 subnets, each with at least 1,000 hosts. The subnet mask you will use is 255.254.0.0.

When answering questions on the platform Brainly, you should always strive to be factually accurate, professional, and friendly. Additionally, it is important to be concise and not provide extraneous amounts of detail. It is important to address all relevant parts of the question and ignore any typos or irrelevant information. Finally, it is helpful to use the key terms from the student's question in your answer in order to provide clarity and demonstrate your understanding of the topic.In the given scenario, the student question is: "Say you have a /15 network address. You are asked to create subnets with at least 1,000 hosts/ subnet. What is the maximum number of such subnets you can create? What is the subnet mask you will use?"To answer this question, we can use the formula 2^n - 2, where n is the number of bits borrowed for subnetting. In this case, we need to create subnets with at least 1,000 hosts per subnet, so we need to borrow enough bits to create a total of 1,024 (2^10) hosts per subnet. Since we already have a /15 network address, which means we have 15 bits for the network portion, we need to borrow 10 more bits to create subnets with at least 1,000 hosts per subnet.So the maximum number of such subnets we can create is:2^10 - 2 = 1,024 - 2 = 1,022 subnetsThe subnet mask we will use will have 15 + 10 = 25 bits set to 1 and the remaining 7 bits set to 0. So the subnet mask we will use is:11111111.11111111.11111110.00000000, which is equivalent to 255.255.254.0.

Learn more about subnet mask here: brainly.com/question/29974465

#SPJ11

The function to determine how many days there are between February 16, 2024, and May 7, 2024 is =B2-B1.

Dates are kept in Microsoft Excel as serial numbers beginning on January 1, 1900. Hence, the serial numbers for the dates of February 16, 2024, and May 7, 2024, are 44303 and 44456, respectively. =B2-B1 is the function to calculate the number of days between February 16, 2024, and May 7, 2024. The number of days between them may be calculated by deducting the serial number of the start date from the serial number of the end date. Hence, the number of days between February 16, 2024, and May 7, 2024, will be determined by =B2-B1.

learn more about function here:

https://brainly.com/question/17971535

#SPJ4

Using the animate() method, developers can create custom animations and transform the appearance of elements on a Web page in a smooth, visually appealing way.

The animation performed by the properties map of the animate() method in the given group of answer choices can be described as follows:

The font size of the selected element is increased to 250% of the default, and the element is moved left 125 pixels.

Here's a step-by-step explanation:

1. First, the animate() method is called on the selected element.
2. The properties map is then used to define the CSS properties to be animated, such as font size and position.
3. The font size property is set to 250% of its default value, causing the text to become larger.
4. The position of the element is adjusted by moving it 125 pixels to the left.
5. The animation runs smoothly according to the specified duration, easing function, and other options provided in the method.

By using the animate() method, developers can create custom animations and transform the appearance of elements on a web page in a smooth, visually appealing way.

To Learn More About Web page

https://brainly.com/question/27960093

#SPJ11

The one statement that can be used to insert a new node at the head of a linked list is as follows: `head_ptr = new_node;`

A linked list is a dynamic data structure that consists of a series of nodes, each of which contains a reference to an object and a pointer that refers to the next node in the list. A linked list is made up of nodes that are not stored in adjacent memory locations. Instead, each node points to the next node in the list. The first node in the list is referred to as the head, while the final node in the list is referred to as the tail. The tail node has a null reference pointer.

A node in a linked list is a data structure that contains the element stored as well as a reference pointer to the next node. Every node in a linked list is connected to the next node in the list by a pointer. A node is made up of two parts: a data part, which stores the actual data, and a pointer part, which stores the memory address of the next node. When a node is deleted, the pointer to that node in the previous node is set to null.

A head pointer is a pointer that points to the first element in a linked list. The head pointer allows you to add new nodes to the beginning of the list and traverse the entire list starting from the beginning. The head pointer is kept track of by the program in order to add, delete, and manipulate nodes in a linked list.

A tail pointer is a pointer that points to the last node in a linked list. It can be utilized to add nodes to the end of the linked list or to speed up linked list traversal by storing a reference to the tail node. The tail pointer is kept track of by the program in order to add, delete, and manipulate nodes in a linked list.

You can learn more about the linked list at: brainly.com/question/29360466

#SPJ11

a. overwhelm the server with a denial of service (DoS)

Overwhelming the server with a denial of service (DOS) is not a method that a malicious person can use to masquerade as someone else when using email or instant messaging. Denial of service attacks is intended to slow down or disrupt network traffic or entire networks, making them unavailable to the users who rely on them. The attacker will deliberately direct a large amount of traffic to the target, usually with the aim of overwhelming the server and causing it to crash. The target may be a single computer, such as a website or an entire network. A DOS attack might be the result of a botnet assault or a network-based intrusion.

learn more about denial of service here:

https://brainly.com/question/30866798

#SPJ11

The statement "SAE Level 3 automation has inherent difficulties, namely: how can the computer ensure the driver is paying enough attention that it can pass over control in case of an emergency.

This is called the hand-off problem." is true.SAE Level 3 is a standard for autonomous vehicles that require little to no driver intervention. These cars are capable of automatically driving themselves, but they require human intervention in case of emergency, and the driver must always be alert and able to take control of the vehicle.The hand-off problem refers to the challenge of transferring control from the autonomous vehicle's computer to the driver. When the autonomous system detects a problem, it must quickly notify the driver and transfer control back to them. This requires the driver to be ready to take over, which is known as the hand-off problem.

Learn more about computer   here:

https://brainly.com/question/21080395

#SPJ11

Answer:

misalignment of paper

Explanation:

A paper needs to load in smoothly , completely flush with the tray

Ursa Major Solar (UMS) can assign a Lightning for Outlook layout to two options: (1) Outlook App Builder and (2) Lightning App Pages.

Step 1: Go to the Setup menu in Salesforce and search for "Outlook Integration and Sync."

Step 2: Enable "Lightning for Outlook" if it's not already enabled.

Step 3: For Option 1 (Outlook App Builder), navigate to the App Builder in Salesforce and create a new Lightning page or edit an existing one. Add components to the layout as desired.

Step 4: For Option 2 (Lightning App Pages), go to the Lightning App Builder, and create a new Lightning App Page or edit an existing one. Customize the layout with components as needed.

Step 5: Save and activate the Lightning for Outlook layout in the appropriate option (Outlook App Builder or Lightning App Pages).

By following these steps, UMS can assign a Lightning for Outlook layout to the desired option.

Learn more about Ursa Major Solar: brainly.com/question/30301022

#SPJ11

A large corporation that needs a high-speed network to test a product that will backup and restore terabytes of data should use a high-speed Local Area Network (LAN) or a Wide Area Network (WAN) with high bandwidth and low latency. These networks will allow for faster data transfer and efficient backup and restoration of large amounts of data.

A large corporation needs a high-speed network to test a product that will backup and restore terabytes of data. The type of network they should use is a Storage Area Network (SAN).

What is a Storage Area Network (SAN)?

A Storage Area Network (SAN) is a high-speed network of storage devices that provides block-level storage access to applications and servers. SANs are typically used to improve application availability, simplify storage management, and improve resource utilization.SANs provide access to consolidated block-level storage. They are typically composed of hosts, switches, storage elements, and storage devices that are interconnected using a variety of topologies, protocols, and technologies to form a holistic storage infrastructure that is highly available, scalable, and resilient.

The primary purpose of a SAN is to provide access to shared storage devices such as disk arrays, tape libraries, and other storage resources.

A SAN provides block-level storage access, which means that a server can access a storage device using a unique identifier (known as a LUN) rather than a file name, path, or drive letter. SANs are ideal for data backup and disaster recovery scenarios that require the fast transfer of large amounts of data between devices.
Learn more about LAN

https://brainly.com/question/19424964

#SPJ11

The technique for summarizing data by dividing it into smaller groups based on specific criteria is Sorting. Clustering refers to identifying similar data points and grouping them together. Filtering involves selecting a subset of data based on specific conditions, and searching involves looking for a specific value or set of values in a data set.

It's true that not all of the firewall policy needs to be translated into an ACL rule (or multiple rules). Some policies might be implemented through other mechanisms or configurations, while only specific portions require translation into ACL rules.

The given statement, "Not all of the firewall policy needs to be translated into an ACL rule (or multiple rules)" is True. What is a firewall? A firewall is a network security device that filters incoming and outgoing network traffic based on a set of user-defined rules. A firewall protects a network by controlling both incoming and outgoing traffic based on predetermined rules. These rules are known as policies, which are implemented as ACL (Access Control Lists) rules. A firewall typically serves as the first line of defense against unauthorized access and malicious activity on a network. A network's firewall policies determine how to handle different types of network traffic based on its source, destination, type, and other attributes. Not all firewall policy needs to be translated into an ACL rule (or multiple rules), and this is a true statement. What is ACL (Access Control List)? ACL (Access Control List) is a list of permissions used to control access to network resources. An ACL can be used to define which users are allowed to access a particular network resource or to restrict access to a specific network resource. ACLs are used in conjunction with network firewalls and routers to enforce network security policies. ACL rules are configured on a firewall to restrict incoming and outgoing traffic based on specified conditions. ACLs are often used in combination with other network security technologies, such as VPNs (Virtual Private Networks), NAT (Network Address Translation), and IDS/IPS (Intrusion Detection/Prevention Systems). Therefore, it is true that not all of the firewall policy needs to be translated into an ACL rule (or multiple rules).
Visit here to learn more about firewall policy:

https://brainly.com/question/30193975

#SPJ11

The best choice to download a custom-built app designed specifically for an organization would be the: enterprise app store, as it is tailored to provide access to the apps needed by the members of that organization.

An enterprise app store is a type of app store that is designed specifically for businesses and organizations. It allows companies to distribute custom-built apps to their employees without the need for them to go through the standard app store review process. This means that apps can be created and deployed quickly and efficiently, allowing organizations to stay ahead of the competition.

Learn more about custom-built app: https://brainly.com/question/29172095

#SPJ11

It is not one of the data acquisition methods. The data acquisition methods are Disk-to-disk byte-stream, Bit-stream, and Disk-to-image

What is Disk-to-disk byte-stream?The Disk-to-disk byte-stream method is a kind of data acquisition technique where one copies data directly from one storage medium (usually a hard drive) to another storage medium, while at the same time creating an exact copy of the data. It is useful in digital forensics investigations because it allows the investigators to acquire data from a suspect's hard drive without modifying it in any way. Disk-to-disk byte-stream is a time-consuming and resource-intensive process.What is Bit-stream?Bit-stream is a technique of data acquisition in which an exact image of the hard disk or other media is created. In this process, a forensic analyst will produce a complete copy of the physical hard disk, including all file systems, partitions, directories, and files, using software designed for this purpose. It is used for analyzing data without modifying the data. What is Sparse data bit-stream?The Sparse data bit-stream is not a data acquisition method.

Learn more about Bit-stream here:

https://brainly.com/question/6542528

#SPJ11

The total raw capacity of the disk drive is 76.8 GB.Answer: 76.8 GB.

The total raw capacity of the disk drive can be calculated as follows:

Note: 1 kilobyte = 1024 bytes. So, the capacity of one surface in kilobytes = 13,629,440,000/1024 = 13,321,250 KB. And the capacity of one surface in gigabytes = 13,321,250/1024 = 12.8 GB.

Finally, the total capacity of the six surfaces in gigabytes = 6 x 12.8 = 76.8 GB. Thus, the total raw capacity of the disk drive is 76.8 GB. Answer: 76.8 GB.

Learn more about capacity of the disk drive: brainly.com/question/19130342

#SPJ11

Answer:

We can create an integer object using the keyword int:

[tex]\texttt{int myInt = 1;}[/tex]

We can create a floating-point value object using the keyword float or double:

[tex]\texttt{double pi = 3.14;}[/tex]

We can create a character object using the keyword char:

[tex]\texttt{char myChar = $'$A$'$;}[/tex]

Note that a string literal is not a primitive data type, as it is an array of chars.

For example:

[tex]\texttt{char data[] = {$'$a$'$, $'$b$'$, $'$c$'$};}[/tex]

is the same thing as:

[tex]\texttt{String str = new String(data)}[/tex]

The Cisco security solution that can prevent noncompliant devices from accessing the network until they are compliant is Cisco Identity Services Engine (ISE). It provides a step-by-step process of identifying, authenticating, and authorizing devices, ensuring that only compliant devices can access the network.

The Cisco security solution that can prevent noncompliant devices from accessing the network until they are compliant is Cisco Identity Services Engine (ISE).

Cisco Identity Services Engine (ISE) is a Cisco Security product that can help organizations enforce compliance, contain threats, and identify problems quickly.

The system accomplishes this by relying on network admission control. Cisco Identity Services Engine (ISE) can prevent non-compliant devices from accessing the network until they become compliant. It also enables security administrators to establish security policies to guarantee that only compliant devices are permitted to access the network.

Cisco Identity Services Engine (ISE) is a trusted security solution that allows security administrators to keep an eye on and keep a tight grip on non-compliant devices.

Cisco Identity Services Engine (ISE) is designed to provide enhanced network access control, visibility, and compliance for networks.

Visit here to learn more about Identity Services Engine:

https://brainly.com/question/16752545?referrer=searchResults

#SPJ11

Answer:

Explanation:

Select the range you want to name, including the row or column labels.

Click Formulas > Create from Selection.

In the Create Names from Selection dialog box, select the checkbox (es) depending on the location of your row/column header. ...

Click OK.

Answer:

To add a named range to an Excel worksheet, you can follow these steps:

1. Select the cells or range of cells that you want to name.

2. Click on the "Formulas" tab in the Excel ribbon.

3. Click on the "Define Name" button in the "Defined Names" group. Alternatively, you can press the "Ctrl + F3" shortcut key.

4. In the "New Name" dialog box, enter a name for the range in the "Name" field.

5. In the "Refers to" field, confirm that the correct range of cells is displayed. You can edit the range if necessary.

6. Click the "OK" button to save the named range.

The named range will now be available for use in formulas, charts, and other features of Excel. You can also view and manage named ranges in the "Name Manager" dialog box, which can be accessed by clicking the "Name Manager" button in the "Defined Names" group of the "Formulas" tab.Explanation:

To enable the analog digital converter auto trigger, writing bit 5 in the ADCSRA register to one is required.

To enable the analog digital converter auto trigger, you need to write bit 5 in the ADCSRA register to one.What is an analog digital converter?An analog-to-digital converter (ADC) is an electronic device that converts an analog signal into a digital signal. Analog signals are continuous-time signals that vary in amplitude and time. These signals must be converted to digital signals in order to be processed by digital systems such as microcontrollers, computers, and signal processors.How to enable the analog digital converter auto trigger?ADCSRA (ADC control and status register A) is a register that controls the ADC's operation. Bit 5 of the ADCSRA register must be written to 1 in order to enable the ADC auto trigger.

Learn more about analog digital converter auto trigger here:

https://brainly.com/question/30202316

#SPJ11

Following the creation of an ETL process, the following action should be performed: transform the data.

ETL stands for Extract, Transform, and Load. ETL is a process used in data warehousing to move data from different sources to a data warehouse or other data repository. The ETL process encompasses three primary functions, namely Extract, Transform, and Load (ETL). Extract is the process of extracting data from various sources, including databases, APIs, or flat files. Transform is the process of cleaning, formatting, and restructuring the data in preparation for loading. Load is the process of loading the transformed data into a data repository, typically a data warehouse. The ETL process is a fundamental process in data warehousing because it is responsible for collecting, cleaning, and loading data into a data warehouse, which can then be used for business intelligence, reporting, or analysis.

learn more about ETL process here:

https://brainly.com/question/31031148

#SPJ4

Zariah is writing an email to an employee about a wireless attack that is designed to capture the wireless transmissions from legitimate users.

Zariah is writing an email, The type of attack that Zariah is describing is a Rogue Access Point (RAP).What is a rogue access point": A Rogue Access Point (RAP) is a wireless access point (WAP) that has been installed on a network by an individual who is not authorized to do so. An attacker who has created a RAP is capable of intercepting information from other wireless devices in the area because the WAP may be programmed to passively intercept traffic or actively interfere with communication between wireless devices.What is a wireless attack?A wireless attack is an assault on a wireless network. These assaults can be used to gain access to network resources or to make it difficult for legitimate users to access network resources. Because of the wireless nature of the attack, it can be carried out remotely, making it more difficult to track down the source of the attack.What are legitimate users?A legitimate user is a user who is authorized to access network resources. These users have been given permissions to access network resources and are authorized to do so. Unauthorized users, on the other hand, do not have permission to access network resources and may attempt to gain access through the use of wireless attacks, such as a Rogue Access Point.

learn more about email here:

https://brainly.com/question/14666241

#SPJ4

When the output port's buffers are full and fresh packets are arriving, packet loss might happen, resulting in the switch dropping packets. Although increasing switch fabric speed might lessen the chance of packet loss, congestion can still happen.

When packets arrive at a pace that exceeds the port's ability to send them out, packet loss occurs at the output ports, which is a typical issue in network switches. As a result, packets are missed or lost, which reduces network performance and causes data loss. By boosting the switch's capacity and enabling it to process more packets more quickly, improving switch fabric speed can help reduce packet loss. Yet, despite having a quicker switch fabric, packet loss might still happen because of network congestion or other reasons. Other tactics, such flow management, congestion control, and quality of service (QoS), must also be used to prevent packet loss.

learn more about output ports here:

https://brainly.com/question/29606972

#SPJ4

The code snippet of the MenuItem interface that contains two methods named getName that returns a string and a method named getPrice that returns a double is given below: interface MenuItem {String getName(); double getPrice();}

The above code snippet consists of an interface named MenuItem that has two methods. The first method is getName() which returns a string value. The second method is getPrice() which returns a double value.
The MenuItem interface with the two required methods can be defined as follows:
```java
public interface MenuItem {
   String getName();
   double getPrice();
}
```

learn more about code snippet here:

https://brainly.com/question/30467825

#SPJ11

To assign the appropriate ICD-10-CM code for borderline hypertension, refer to the ICD-10-CM index and locate the term "Hypertension, borderline." The corresponding code is R03.0. Remember to follow general ICD-10-CM coding guidelines and conventions when assigning codes.

When answering questions on the platform Brainly, you should always be factually accurate, professional, and friendly. You should be concise and not provide extraneous amounts of detail. You should use the following terms in your answer: nstructions: use the icd-10-cm index and tabular list to assign the appropriate code to each diagnostic statement. Refer to general icd-10-cm coding guidelines and coding conventions when assigning codes. Please be aware that when an answer consists of more than one code, there will be an answer blank for each code. Borderline hypertension.What is borderline hypertension?Borderline hypertension is a medical condition that occurs when the blood pressure readings are above the normal range but not high enough to be considered high blood pressure. Blood pressure is the force of blood pushing against the walls of the arteries as the heart pumps blood. A blood pressure reading of 120/80 mm Hg or lower is considered normal. A reading of 140/90 mm Hg or higher is considered high blood pressure or hypertension. Borderline hypertension usually refers to blood pressure readings between 120-139/80-89 mm Hg.How is borderline hypertension coded?The appropriate ICD-10-CM code for borderline hypertension is ICD-10-CM code R03.0 Hypertension unspecified. The index term is Hypertension/borderline (systolic 120-139 mm Hg or diastolic 80-89 mm Hg). Note that this code is considered an unspecified code, and a more specific code should be used if possible. However, if no specific code is available, the unspecified code should be used.

Learn more about hypertension here: brainly.com/question/29799896

#SPJ11

The following statements are true about Virtual Network Interface Cards (vNICs) A. virtual nics need the appropriate driver to function. virtual nics don't have a Mac address and C. multiple virtual nics can be added to a virtual machine.

Virtual NICs need the appropriate driver to function, and virtual NICs don't have a MAC address. These statements are true. A MAC address is a unique identifier for each network interface that is used to identify devices on the network. Virtual NICs, on the other hand, do not have a MAC address because they are emulated by the physical NIC. Virtual NICs can only communicate with other virtual NICs. This statement is false.

Virtual NICs can communicate with other virtual NICs as well as physical NICs on the network. Multiple virtual NICs can be added to a virtual machine. This statement is true. Multiple vNICs can be added to a virtual machine to provide additional network interfaces or to separate network traffic types. The type of NIC installed in the physical machine determines the type of virtual NIC that is emulated. This statement is also true.

Therefore, the correct option is A. and C.

The question was incomplete, Find the full content below:

which of the following statements are true about virtual nics? (select two.) answer

A. virtual nics need the appropriate driver to function. virtual nics don't have a Mac address.

B. virtual nics can only communicate with other virtual nics.

C. multiple virtual nics can be added to a virtual machine.

D. the type of nic installed in the physical machine determines the type of virtual nic that is emulated.

Know more about Virtual Network Interface Cards (vNICs) here:

https://brainly.com/question/29307934

#SPJ11

Virtual NICs need drivers and multiple virtual NICs can be added to a virtual machine.

The correct statements about virtual NICs are:

The other statements are false:

https://brainly.com/question/31674424

To reference the form with the name attribute "specs" and the id "specs entry" in JavaScript, you can use the following method:

```javascript
var form = document.getElementById("specsentry");
```

This method uses "getElementById" to find the form by its id, "specs entry," and stores it in the variable "form."

To reference the second form listed in the HTML file with the name attribute specs and the id specs entry in JavaScript, you can use the following code snippet: document.forms[1].name; document.forms[1].id; Explanation: In JavaScript, you can reference HTML form elements using the "document.forms" collection. The "document.forms" collection returns an array of all the forms in the current HTML document. The first form in the "document. forms" collection has an index of 0, the second form has an index of 1, and so on. Therefore, to reference the second form in the HTML document, you can use "document. forms[1]." Once you have a reference to the form element, you can access its attributes, such as `name` and `id` using dot notation. Therefore, to get the name and id of the second form in the HTML document, you can use the following code snippet: document. forms[1].name; document.forms[1].id;
visit here to learn more about JavaScript:

https://brainly.com/question/28448181

#SPJ11

The command you should use is "git checkout ." (git checkout space period) to discard all changes made to the modified files and revert them back to their last committed state.

To start from scratch on the task and discard the changes made to activity2, activity3, and activity4 without committing them, you can use the "git checkout" command with the file names to revert the changes back to the last committed state. The command would be "git checkout activity2 activity3 activity4". This will overwrite any changes made to these files since the last commit, effectively starting from scratch on the task. It is important to note that this command will discard any unsaved changes in the working directory, so be sure to save any important changes before running the command.

learn more about git checkout here:

https://brainly.com/question/29996577

#SPJ4

I should always ensure that my response is concise, relevant, and friendly.I will use the following terms in my answer to the student question: "working with a database table," "invoice data," "customer ID column," "SQL query," "

For such more question on customer

https://brainly.com/question/26313265

#SPJ11

A Programmable Logic Controller (PLC) is an industrial digital computer that controls various automation processes in industries. The typical switching voltages that may be applied to the inputs of a PLC can be categorized into two types: AC (Alternating Current) and DC (Direct Current) voltages.

1. AC Voltage Inputs: These are commonly used in industrial environments due to their ability to travel long distances with minimal power loss. The typical AC input voltages for a PLC range from 110V to 240V, with 120V and 240V being the most common in North America.

2. DC Voltage Inputs: DC voltages are often used in control circuits and sensors for their simplicity and stability. The typical DC input voltages for a PLC vary from 5V to 30V, with 12V, 24V, and 48V being the most common.

When designing a PLC system, it's important to consider the compatibility of the input voltages with the specific PLC model being used, as well as the voltage requirements of the sensors and devices connected to the PLC. Proper voltage selection ensures efficient communication and safe operation of the entire control system.

To Learn More About Programmable Logic Controller

https://brainly.com/question/14733216

#SPJ11

The correct statement about freeing memory is that once finished, you should free the pointer array.

What is memory in programming: In computer science, memory is a component of a computer system that stores data for short or long periods. The information stored in memory is volatile, meaning that it is only available while the computer is turned on. Once the computer is turned off, the data is lost.In programming, memory is usually managed by the operating system or programming language. When a program requests memory to store data, the operating system or programming language allocates a block of memory and returns a pointer to that block of memory. The pointer is then used to access the data stored in that block of memory.What is freeing memory: When a program is done with a block of memory, it should free the memory so that it can be used by other parts of the program or by other programs running on the system. Failing to free memory can cause a program to run out of memory, resulting in crashes or other problems. Freeing memory is also important for security reasons, as failing to free memory can leave sensitive data in memory that could be accessed by an attacker.Freeing memory involves releasing the block of memory back to the operating system or programming language so that it can be used again. In C and C++, this is done using the free() function. It is important to free memory in the correct order to avoid memory leaks or other problems. The correct order is to free each element first, and then once finished, you should free the pointer array.

learn more about memory here:

https://brainly.com/question/18722201

#SPJ4