As each successive member of the alkene series is considered, the ratio of carbon atoms to hydrogen atoms

A) decreases
B) increases
C) remains the same

Answer:

combined gas law, which relates the pressure, volume, and temperature of a gas. The combined gas law is given by:

P1V1/T1 = P2V2/T2

Where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.

In this problem, the temperature remains the same, so we can simplify the combined gas law to:

P1V1 = P2V2

Substituting the given values into the equation, we get:

760 mmHg × 2.5 L = 304 mmHg × V2

Solving for V2, we get:

V2 = (760 mmHg × 2.5 L) / 304 mmHg

V2 ≈ 6.26 L

Therefore, the final volume of the gas is approximately 6.26 L.

Answer:

Capillary action occurs when the adhesion to the walls is stronger than the cohesive forces between the liquid molecules. The height to which capillary action will take water in a uniform circular tube (picture to right) is limited by surface tension and, of course, gravity.

Capillary action is the phenomenon where a liquid rises in a narrow tube, such as a glass capillary or a plant stem, due to the adhesive and cohesive forces between the liquid and the tube. This phenomenon can be explained by a combination of intermolecular forces, namely adhesion and cohesion.

Adhesion refers to the attractive forces between unlike molecules. In the case of capillary action, the adhesive forces between the liquid and the walls of the capillary tube allow the liquid to "wet" the tube, which means that the liquid molecules adhere to the tube's surface. The strength of the adhesive forces depends on the chemical nature of the liquid and the tube's material. For example, water is attracted to glass due to the presence of polar groups on the glass surface.

Cohesion, on the other hand, refers to the attractive forces between like molecules. The cohesive forces between the liquid molecules cause them to stick together, forming a meniscus, which is the curved surface of the liquid in the tube. The cohesive forces are usually stronger than the adhesive forces, causing the liquid to rise in the tube against the force of gravity.

The height that the liquid rises in the tube depends on the balance between the adhesive and cohesive forces, as well as the diameter of the tube. A narrower tube will have a greater capillary rise than a wider one because the liquid experiences a greater amount of adhesive forces with the tube's surface in a narrower tube.

In summary, capillary action is a result of the interplay between adhesive and cohesive forces, which causes a liquid to rise in a narrow tube. Adhesion allows the liquid to wet the tube, while cohesion causes the liquid molecules to stick together, forming a meniscus that rises in the tube against the force of gravity.

Answer: B

Explanation:

Can solve for q= m xCp X ▲T

4.0 X 4.18 X 2 = 33

The reaction was spontaneous and results in a standard free energy shift of 61.5 kJ.

We define the normal state of any solid or liquid material as the most solid region of that material at the a stress of one bar at any given temperature.For instance, water's standard condition for a temperature of 10 C is ice at the a tension of one bar, and for a temperature of +10 C is liquid at the a compression of one restaurant.

India's average temperature for 2021 was 25.93 ° Celsius, a little increase from 25.78 degrees Centigrade the year before.In that year, the minimum temperature was 20.9 °C.

To know more about energy shift visit:

https://brainly.com/question/30601675

#SPJ1

The chemical change of decomposition of barium fluoride will give barium and fluoride ions.

Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.

There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

Learn more about chemical change,here:

https://brainly.com/question/23693316

#SPJ1

0.312 moles of dinitrogen monoxide will be  produced upon complete reaction of 25.1 g of ammonium nitrate.

Ammonium nitrate is a chemical compound with the chemical formula of NH 4NO 3 and is a white crystalline salt consisting of ions of ammonium and nitrate.

NH4NO3 → N2O + 2H2O

Molar mass of NH4NO3 = 80.04 g/mol

Number of moles of NH4NO3 = 25.1 g / 80.04 g/mol = 0.312 moles

According to the balanced chemical equation, 1 mole of NH4NO3 produces 1 mole of N2O. Therefore, 0.312 moles of NH4NO3 will produce 0.312 moles of N2O.

0.312 moles of dinitrogen monoxide will be formed after the reaction of 25.1 g of ammonium nitrate.

To know more about ammonium nitrate, refer

https://brainly.com/question/29341539

#SPJ1

Taking into account the reaction stoichiometry, 33.108 grams of NH₄HO are formed if excess ammonium sulfate reacts with 35.0 grams of calcium hydroxide.

In first place, the balanced reaction is:

(NH₄)₂SO₄ + Ca(OH)₂ → CaSO₄ + 2 NH₄HO

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amount of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: if by reaction stoichiometry 74 grams of Ca(OH)₂ form 70 grams of NH₄HO, 35 grams of Ca(OH)₂ form how much mass of NH₄HO?

mass of NH₄HO= (35 grams of Ca(OH)₂ ×70 grams of NH₄HO) ÷74 grams of Ca(OH)₂

mass of NH₄HO= 33.108 grams

Finally, 33.108 grams of NH₄HO are formed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

The final temperature of the water will be approximately 50.0°C (to two significant figures).

To solve this problem, we need to use the specific heat capacity equation:

q = m * c * ΔT

where

q is the amount of heat energy added,

m is the mass of the water,

c is the specific heat capacity of water, and

ΔT is the change in temperature.

First, we need to determine the initial temperature of the water. We are given that the water is initially at 40.0°C.

Next, we can calculate the amount of heat energy that is added to the water:

q = 418 J

m = 10.0 grams.

c is 4.184 J/g°C.

We can rearrange the equation to solve for ΔT:

ΔT = q / (m * c)

ΔT = 418 J / (10.0 g * 4.184 J/g°C) = 9.99°C

This is the change in temperature of the water. To find the final temperature, we add this to the initial temperature:

Final temperature = 40.0°C + 9.99°C = 49.99°C

Learn more about heat energy at:

https://brainly.com/question/19666326

#SPJ1

Answer:

Coal is considered to be a nonrenewable resource.

They would all have the same atomic number but they would have different mass numbers.

Isotopes are atoms of the same element that have different numbers of neutrons in their nuclei. Since the number of neutrons affects the atomic mass of an element, isotopes of the same element can have different masses.

Isotopes of an element have the same number of protons, which determines the element's atomic number. Isotopes can have different physical and chemical properties due to their different masses.

Learn more about isotopes:https://brainly.com/question/11680817

#SPJ1

156

because it has the electorns in the state by the groubd

Hydrochloric acid, HCl, is formed when chlorine gas, Cl2, reacts with water. The balanced chemical equation for this reaction is:

Cl2 + H2O → HCl + H2O

A chemical equation is a symbolic representation of a chemical reaction that uses chemical formulas to describe the reactants and products of the reaction. The reactants are written on the left side of the equation and the products are written on the right side. The arrow separating the two sides of the equation indicates the direction of the reaction, with the reactants on the left side and the products on the right side.

The amount of hydrochloric acid formed will be equal to the number of grams of water used in the reaction. Since 22.6 grams of water was used, 22.6 grams of hydrochloric acid will be formed upon the complete reaction of 22.6 grams of water with excess chlorine gas.

To learn more about chemical equation

https://brainly.com/question/29886207

#SPJ1

When the temperature is 2°C, a gas sample is collected in a 2. 2-L tank. the Kelvin temperature of the gas is 275.15K

To convert a temperature from Celsius to Kelvin, simply multiply it by 273.15 degrees Celsius. So, in this instance, we have:

Celsius temperature + 273.15 K Kelvin temperature = 2°C + 273.15 K Kelvin temperature = 275.15 K

As a result, the gas's Kelvin temperature is 275.15 K.

The Kelvin temperature unit is used in the scientific community. It is an absolute temperature scale, with 0 Kelvin representing the absolute coldest temperature possible.

One Kelvin degree is the same size as one Celsius degree, but the zero point on the Kelvin scale is 273.15 degrees different from the Celsius scale. To convert a temperature from Celsius to Kelvin, simply multiply it by 273.15 degrees Celsius. Kelvin temperatures are widely used in scientific and engineering applications, especially thermodynamics and materials science.

learn more about Kelvin here:

https://brainly.com/question/29082662

#SPJ4

According to the question  the volume of dry butane at 824.1 torr and 55.9 °C is 0.945 L.

Volume is the measure of the three-dimensional space that an object or substance occupies. It is usually measured in cubic units such as milliliters (ml), liters (L), or cubic centimeters (cm3). Volume is an important physical property of substances because it helps to determine the amount of a material present in a given space.

We can use the Ideal Gas Law to calculate the volume of the dry butane gas.

The Ideal Gas Law states that PV = nRT, where P is pressure, V is volume, n is the number of moles of the gas, R is the ideal gas constant, and T is temperature.

First, we need to calculate the number of moles of butane gas, n, using the molar mass of butane, which is 58.12 g/mol.

n = (mass of gas)/(molar mass of gas)

n = (1.00 L * 754.4 torr * 0.08206 L*atm/mol*K * (283.15 K))/(58.12 g/mol * 101.325 kPa/atm)

n = 0.077 moles

Now that we know the number of moles of butane gas, we can calculate the volume of the dry butane gas at the new pressure and temperature.

V = (nRT)/P

V = (0.077 moles * 0.08206 L*atm/mol*K * (328.04 K))/(824.1 torr)

V = 0.945 L

To larn more about volume

https://brainly.com/question/14197390

#SPJ1

The percent yield of the compound C₅H₁₂ when 3. 00 g of C₅H₁₂ were obtained in the reaction of 5. 00 g of C₃H₄ is 4.16%.

In the actual world, chemical processes do not always happen as intended. Apart from spills and other experimental failures, there are frequently losses as a result of an incomplete reaction, unwanted side reactions, and so on. Chemists require a metric that reflects the success of a reaction. This is referred to as the percent yield.

To calculate the percent yield, first establish how much of the product should be created using stoichiometry. The theoretical yield is the greatest quantity of product that can be created from the given quantities of reactants. The amount of product created when the reaction is carried out in the laboratory is referred to as the real yield.

We have equation as,

5C₃H₄ + 8H₂ → 3C₅H₁₂

We have 3 grams of C₅H₁₂

we have 5 grams of C₃H₄

Theoretical yield = C₅H₁₂ = 5 x 12 + 12 x 1 = 72

So percent yield  = actual yield / Theoretical yield x 100

= 3/ 72 x 100

= 0.04167 x 100

= 4.16 %

So percentage yield is 4.16%.

Learn more about Percent Yield:

https://brainly.com/question/14714924

#SPJ4

If the adhesion and cohesion forces were equal in a graduated cylinder, there would be no meniscus formation. This is because the shape of a meniscus is a result of the difference in strength between the adhesive and cohesive forces between the liquid and the surface it comes into contact with.

If the adhesive forces were equal to the cohesive forces, the liquid would not be attracted more strongly to the surface of the container than to its own molecules. As a result, the surface of the liquid would be flat and level with the edge of the container. This is the case with mercury, which has approximately equal cohesive and adhesive forces, resulting in a flat surface in a container.

However, in most cases, the adhesive forces between a liquid and a container are stronger than the cohesive forces between the liquid molecules themselves, resulting in a concave meniscus. This is because the liquid is attracted more strongly to the surface of the container than to its own molecules, causing the surface of the liquid to curve downward at the edges. On the other hand, if the cohesive forces were stronger than the adhesive forces, the liquid would form a convex meniscus, with the surface of the liquid curving upward at the edges. This is the case with water in a hydrophobic container, such as a wax-coated or greasy container.

The atom economy for this reaction to produce nickel is approximately 44%.

What is Percentage Composition?

Percentage composition is a term used in chemistry to describe the percentage by mass of each element in a chemical compound. It is calculated by dividing the mass of each element by the total mass of the compound and multiplying by 100%. For example, the percentage composition of water (H2O) can be calculated by dividing the mass of hydrogen by the total mass of the compound (2 x 1.008 g / 18.015 g) and multiplying by 100%, which gives approximately 11.2%.

To calculate the atom economy, we need to compare the mass of the desired product (Ni) with the total mass of all the reactants.

The molar mass of NiO is 74.71 g/mol, and the molar mass of CO is 28.01 g/mol.

The equation shows that 1 mol of NiO reacts with 1 mol of Ni to produce 1 mol of Ni and 1 mol of CO.

The mass of 1 mol of Ni is 58.69 g.

74.71 g (NiO) + 58.69 g (Ni) = 133.4 g

The mass of the desired product (Ni) is 58.69 g.

Therefore, the percentage atom economy is:

(58.69 g / 133.4 g) x 100% = 44.04%

So the atom economy for this reaction to produce nickel is approximately 44%.

Learn more about Percentage Composition from given link

https://brainly.com/question/17021926

#SPJ1

Answer:

171.5 liters

Explanation:

PV = nRT

convert the temperature from Celsius to Kelvin:

T = 112 C + 273.15 = 385.15 K

substitute the given values into the ideal gas law:

V = (nRT)/P

V = (9.6 mol x 0.0821 L•atm/mol•K x 385.15 K)/2.17 atm

V = 171.5 L

The volume of the container is around 171.5 liters.

Because it costs the least per kilogram, sodium chloride is the most cost-effective option for a road deicer based on the information provided.

Silicon dioxide is less effective at melting ice and costs significantly more than calcium chloride. However, it is important to take into account factors like temperature, humidity, and the presence of other materials on the road surface when selecting a deicer because different deicing materials may be more effective in different conditions.

The process of removing or preventing the formation of ice on roads and highways during winter weather conditions is known as road deicing. Since ice can make roads dangerously slick and slippery, this is essential for maintaining safe driving conditions.

Rock salt, or sodium chloride, is the most common deicing material. It is applied to the road surface to melt the ice and prevent new ice from forming. Deicing can also be done with other materials like calcium chloride and magnesium chloride.

Learn more about road deicing:

brainly.com/question/18729522

#SPJ1

where L represents ice's 334 J/g latent heat of fusion. To account for the energy required to melt the ice, we must include this term. The response is 13.7 g.

Let's use the following formula:

Q = mcΔT

where Q is the amount of heat gained or lost, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

For water, the specific heat capacity is 4.18 J/g°C, and for ice, it is 2.09 J/g°C.

First, let's calculate the amount of heat lost by the water:

Q1 = mcΔT = 30 g × 4.18 J/g°C × (45°C − 0°C) = 5658 J

Now, let's calculate the amount of heat gained by the ice:

Q2 = mcΔT + mL = m × 2.09 J/g°C × (0°C − (−15°C)) + m × 334 J/g = m × (314.15 J/g)

where L is the latent heat of fusion for ice, which is 334 J/g. We need to add this term to account for the energy needed to melt the ice.

Since Q1 = Q2, we can solve for m:

m = Q1 / (mcΔT + mL) = 5658 J / (30 g × 2.09 J/g°C × (0°C − (−15°C)) + 30 g × 334 J/g) ≈ 13.7 g

Therefore, the answer is 2. 13.7 g.

to know more about liquid water here:

brainly.com/question/18761083

#SPJ1

   Adding more oxygen gas to rusting iron metal will increase the reaction rate. This is because the rate of the reaction depends on the concentration of the reactants. By adding more oxygen gas, the concentration of oxygen molecules will increase, which will result in more frequent collisions between iron and oxygen molecules. This, in turn, will increase the rate of the reaction and the formation of rust.

   Putting a beaker of reacting nitric acid and sodium hydroxide into the refrigerator will decrease the reaction rate. This is because the rate of the reaction is dependent on temperature. Lowering the temperature will decrease the kinetic energy of the molecules, which will decrease the frequency of collisions between the nitric acid and sodium hydroxide molecules, leading to a slower reaction rate.

Answer: check explanation my son

Explanation: 1. Adding more oxygen gas to rusting iron metal will increase the reaction rate. This is because oxygen is a reactant in the rusting reaction and by increasing the amount of oxygen, there will be more molecules available to collide and react with the iron metal, resulting in an increased rate of reaction.

2. Putting a beaker of reacting nitric acid and sodium hydroxide into the refrigerator will decrease the reaction rate. This is because the colder temperature will reduce the kinetic energy of the molecules, causing them to collide less frequently and slowing down the rate of reaction.

The statement "Gravity causes stars to cluster" describes the formation of galaxies. Galaxies are vast collections of stars, gas, and dust held together by gravity.

What is gravity?

A fundamental force in the cosmos that draws things together is called gravity. All objects with mass are attracted to one another because to this force, which also keeps the planets in their orbits around the sun.

Einstein's theory of general relativity, which asserts that matter warps space-fabric time's and creates a gravitational field that causes objects to travel along curved pathways, is used to explain gravity. The mass of the objects and the separation between them determine the gravitational force's strength; bigger masses and closer separations provide a stronger gravitational pull.

The statement "Gravity causes stars to cluster" describes the formation of galaxies. Galaxies are vast collections of stars, gas, and dust held together by gravity. The formation of galaxies is a complex process that involves the gravitational collapse of a large cloud of gas and dust, leading to the formation of stars and the clustering of those stars into galaxies. This process is influenced by various factors, including the initial conditions of the gas cloud, the amount of dark matter present, and the interactions between galaxies.

Learn more about Gravity click here:

https://brainly.com/question/72250

#SPJ1

Galaxies are created as a result of the phenomenon known as star clustering due to gravity.

What is Gravity?

Gravity is a fundamental force of nature that causes physical objects to attract each other. It is the force that causes objects with mass to be drawn towards each other. Gravity is a universal force that affects all objects with mass, no matter how small or large they are. The strength of gravity depends on the mass of the objects involved and the distance between them. The force of gravity was first described by Sir Isaac Newton in his law of universal gravitation, and it was later refined by Albert Einstein's theory of general relativity. Gravity plays a fundamental role in shaping the structure of the universe, from the smallest particles to the largest structures such as galaxies and clusters of galaxies.

Galaxies are formed when gravity pulls together vast clouds of gas and dust, causing them to collapse and form stars. Over time, these stars cluster together to form galaxies. The other statements also describe various aspects of star and galaxy formation, but the statement that best describes the formation of galaxies is the one about gravity causing stars to cluster.

Learn more about Gravity from given link

brainly.com/question/72250

#SPJ1

The empirical formula of the compound formed when 2.7g of aluminum forms 5.1g of its oxide is Al2O3.

To find the empirical formula, first calculate the molar mass of aluminum oxide by multiplying the molar mass of aluminum (26.98 g/mol) and the molar mass of oxygen (15.99 g/mol) and adding them together (26.98 g/mol + 15.99 g/mol = 42.97 g/mol).
Next, divide the given mass of aluminum oxide (5.1g) by the molar mass of aluminum oxide (42.97 g/mol) to calculate the number of moles of aluminum oxide (5.1g/42.97 g/mol = 0.119 mol).
Next, divide the given mass of aluminum (2.7g) by the molar mass of aluminum (26.98 g/mol) to calculate the number of moles of aluminum (2.7g/26.98 g/mol = 0.100 mol).
Now calculate the mole ratio of aluminum to oxygen by dividing the number of moles of aluminum by the number of moles of oxygen (0.100 mol/0.119 mol = 0.8403).
Finally, express this ratio in terms of whole numbers. The empirical formula of the compound formed is Al2O3.

For more question on empirical formula click on

https://brainly.com/question/1603500

#SPJ11

Answer:

0.085049833

Explanation:

use the formula n=number of particles/Avogadro's number and find the value of n which is miles and then use the formula n=mass/molar mass. The molar mass you multiply the mass number of oxygen by 2

molar mass= 32g/mol

Avogadro's number=6.02*10^23

number of particles=1.6*10^21

The equilibrium constant of the reaction is  [CO₂]/([C][O₂]).

The equilibrium constant for the reaction:

C + O₂ = CO₂

can be written as:

Kc = [CO₂]/([C][O₂])

where;

The equilibrium constant Kc depends on the temperature and pressure of the system. At a given temperature and pressure, Kc is constant for a particular reaction, and it indicates the relative amounts of reactants and products at equilibrium.

The actual value of Kc for the given reaction can be determined experimentally, but it is approximately 1.00 x 10^23 at 25°C, which indicates that at equilibrium, the reaction heavily favors the formation of CO₂.

Learn more about equilibrium constant here: https://brainly.com/question/19340344

#SPJ1

Answer:

315 kg

Explanation:

If the ore is 65% waste material, then the mass of the actual sodium in 1 tonne of ore is:

mass of sodium = 0.35 x 1000 kg = 350 kg

The process of electrolysis separates the sodium from the other components of the ore. The amount of sodium extracted will depend on the efficiency of the electrolysis process, which is typically measured by its Faraday efficiency.

The Faraday efficiency is the ratio of the amount of substance actually produced by electrolysis to the amount predicted by the theoretical stoichiometry of the reaction. For the electrolysis of sodium, the theoretical stoichiometry is:

2 Na+ + 2 e- → 2 Na

This reaction requires 2 moles of electrons (2 Faradays) to produce 2 moles of sodium.

If we assume a Faraday efficiency of 90%, this means that 90% of the theoretical amount of sodium is actually produced by electrolysis. Therefore, the mass of sodium extracted from 1 tonne of ore would be:

mass of sodium extracted = 0.9 x (2/2) x 350 kg = 315 kg

So, the company would extract 315 kg of sodium from 1 tonne of ore that is 65% waste material, assuming a Faraday efficiency of 90%.

Answer:

mass of O₂ produced is 576 grams.

What is the stoichiometry of a reaction?

Stoichiometry is the ratio of reactant particles to product particles in a reaction.

2NaClO₃(s) → 2NaCl(s) + 3O₂(g)

Therefore, in the reaction above, the stoichiometry is 2 : 2 : 3. i.e, two parts of NaClO₃ will produce 2 parts of NaCl and 3 parts of O₂.

Hence, if 12.00 moles of NaClO₃ is used, then, moles of O₂ = 3/2 × (12.00) = 18.00 moles.

To calculate mass in grams of O₂ produced, multiply number of moles by molar mass.

m(O₂) = n×M = 18.00×(16×2) = 576 g

Therefore, mass of O₂ produced is 576 grams.

The parts of an ecosystem are population, community, organism.

The term "ecosystem" was originally used in an article by British ecologist Arthur Tansley in 1935. Tansley requested that Arthur Roy Clapham think of the term, and he did. Tansley came up with the concept to emphasise the importance of material exchanges between living things and their environment.

Humans have an impact on and alter fundamental ecological processes as ecosystem components, which in turn affects us as individuals and members of society.

An ecosystem that is flourishing and diverse provides its inhabitants with an abundance of necessities like food, water, shelter, economic livelihood, leisure, and scenic beauty.

All the zebras form a population.

Zebras, gazelle, giraffes, trees form a community

A giraffe: organism

Gazelle, zebras, giraffes, water, trees, soil: ecosystem

To learn more about ecosystem from given link

https://brainly.com/question/15830752

#SPJ1

Complete question -

Use the image to match the parts of an ecosystem to each description.

All the zebras form a ___________.

Zebras, gazelle, giraffes, trees form a _______________

A giraffe: _____________-

Gazelle, zebras, giraffes, water, trees, soil: _________

Answer:

The Kinetic Molecular Theory states that gas particles are in constant motion and exert no attractive forces on each other. This means that gas particles can move around freely and have no interactions with each other. Real gases, however, have molecules that are much larger than ideal gas molecules and are subject to attractive forces. These attractive forces between molecules cause the gas particles to be attracted to each other, resulting in increased pressure, lower temperature, and lower volume than that of an ideal gas in the same situation. This means that real gases do not behave ideally, as they are not in a perfect state of random motion, and their pressure and temperature are lower than those of an ideal gas

Explanation: