Answer:
3 km displacement
Explanation:
I'm pretty sure that's the answer, I'm so sorry if it's not
After seeing the fur rubbed with the rod attract the neutral paper, imagine you had an instrument that lets you zoom in enough to see what the paper and rod are made of. Draw a model that shows what happens to the neutral paper to cause it to move towards the charged rod. Make sure to label everything in your model
Seeing the fur rubbed with the rod attracts neutral paper, this happens because the friction of the rod with the rubbed can produce a static electric force. It is this static electric force that causes the pieces of paper to be attracted and rod up.
If the rod or ruler has been rubbed into the hair, then brought closer to the paper, then the paper will lift and stick. Indeed, this can happen due to the presence of an electric charge. When you rub a plastic ruler over your hair, it becomes electrically charged, causing the paper to pull and stick.
The electric charge consists of two types of charge, namely negative charge, and positive charge. However, some objects have an equal amount of negative charge and positive charge. Objects that have the same amount of positive and negative charges are called neutral objects. Initially, a plastic ruler is also an electrically neutral object.
When you rub the ruler against dry hair, it gets an electric charge, because of that electric charge the plastic ruler can exert a force on the paper and pull it closer.
Learn more about the electric charge to the fur rubbed at https://brainly.com/question/389528
#SPJ4
You can tell from reading this passage that -
the narrator will definitely find a diamond at the Crater of Diamonds State Park.
diamonds are rare, valuable gems.
garnet is as valuable as a diamond.
semi-precious stones are ugly.
Answer: B or "diamonds are rare,valuable gems".
Explanation:
since the link does not show very much, I don't know if A is correct or not. D is incorrect because that is an opinion. C is incorrect.
the density of mercury is 13.6 g\cm3 find the volume of 270 of mercury?
Answer:
the density of the mercury is 19.85 cm^3
Explanation:
Given that
The density of the mercury is 13.6g\cm^3
And, the mass of the mercury is 270
We need to determine the volume of the mercury
As we know that
density = mass ÷ volume
13.6 g/cm3 = 270 g/ volume
volume = (270 g) ÷ (13.6 g/cm3)
= 19.85 cm^3
Hence, the density of the mercury is 19.85 cm^3
How do scientists collect evidence about Earth's climate?
"Scientific evidence for warming of the climate system is unequivocal."
What evidence can be used to study the Earth's past climate?Organisms such as diatoms, forams, and coral) can obey useful climate proxies. Other proxies involve ice cores climate, tree rings, and sediment cores. Chemical deputy records include isotope ratios, elemental examination, biomarkers, and biogenic silica.
Climate analyzers use every possible direct and indirect compilation to study the full history of Earth's climate, ice cores drawn from Greenland, Antarctica, and tropical mountain glaciers appear that Earth's climate greets to changes in greenhouse gas levels.
So we can conclude that Climate change is most usually measured using the average surface temperature of the planet.
Learn more about the climate here: https://brainly.com/question/17922964
#SPJ1
How much of the world's energy is hydroelectric?
According to the United Nations Environment Programme, hydropower accounted for 16.6% of global electricity generation in 2018.
This is equivalent to a total installed capacity of 706 GW, making it the second largest energy source after thermal sources.
Hydropower is a renewable energy source and is often seen as a more sustainable alternative to thermal sources, as it does not release any greenhouse gases into the atmosphere. Additionally, hydropower is a reliable source of energy, and can be used to meet peak energy demand.
Learn more about hydroelectric energy:
https://brainly.com/question/3077353
#SPJ4
a car weighs 3600 kg is traveling at 21.0 m/s. the driver doesn?t notice a red light and rear-ends another car at rest. both cars stick together and move with a speed of 9.0 m/s. what is the mass of the car that was at rest?
Answer:
Below
Explanation:
Use law of conservation of momentum
momentum before crash = momentum of the system after crash
3600 kg * 21 m/s = (3600+ x ) * 9
solve for x = 4800 kg
An atom with 29 protons and 36 neutrons is an isotope of
(A) Si
(B) Cu
(C) Kr
(D) CI
Answer:
(B) Cu
Explanation:
An atom can be defined as the smallest unit comprising of matter that forms all chemical elements. Thus, atoms are basically the building blocks of matters and as such determines or defines the structure of a chemical element.
Generally, atoms are typically made up of three distinct particles and these are protons, neutrons and electrons.
Isotopes can be defined as the atom of an element that has the same number of protons but different number of neutrons. This ultimately implies that, the isotopes of an element have the same atomic number (number of protons) but different atomic mass (number of nucleons).
The isotope of an element is denoted by [tex] X_{Z}^{A} [/tex]
Where; X is the symbol of the element.
A is the atomic mass or number of nucleons.
Z is the atomic number or number of protons.
Hence, an atom with 29 protons and 36 neutrons is an isotope of copper because it has an atomic mass of 65, which corresponds with that of the chemical element known as copper with the symbol, Cu.
A point particle of charge -5.40 nC is located at the origin of a Cartesian coordinate system. Determine the magnitude of the electric field due to this charge at a distance of 23.0 cm from the charge.
The magnitude of the electric field due to this charge at a distance of 23.0 cm from the charge is 918.7 N/C.
Given that,
Charge on point particle Q = -5.4 nC = -5.4 × 10⁻⁹ C
Distance from the charge r = 23 cm = 23 × 10⁻² m
The relation between distance charge and electric field is known to be,
E = 1/4πε₀ × Q/r² = 9 × 10⁹ × (-5.4 × 10⁻⁹)/(23 × 10⁻²)² = (9 × 5.4)× 10⁴/(23)² = 918.7 N/C
Thus, the magnitude of the electric field due to this charge at a distance of 23.0 cm from the charge is calculated to be 918.7 N/C.
To know more about electric field:
https://brainly.com/question/14595416
#SPJ4
Which of the following is the law of action-reaction?
OA. Newton's first law
B. Newton's second lav
OC. Newton's third law
OD. Newton's fourth law
Answer:
OC.Newton's third law of motion which states that,"every action has equal and opposite reaction."
*mark me brainliest
X-rays with wavelengths of 0.95 nm are detected at a scattering angle of straight theta in a Compton-scattering experiment, as shown in the drawing. What is the scattering angle straight theta if the energy of the scattered photon is 5.111 keV. (For accuracy, use h = 6.626 x 10-34 J·s and c = 2.998 x 108 m/s.)
Answer:
The scattering angle is 0.80
Explanation:
As we know
Wave length = h/mc (1-cos α) --1
W = mc^2
m = E/c^2
Substituting this in equation 1 we get
Wavelength = hc/E (1-cos α)
Substituting the given values, we get -
0.95*10^-9 = [(6.626 *10^-34 * 2.998 *10^8)/5.111*1000*1.6*10^-19} (1-cos α)
(1-cos α) = 1.14 *10^-10
cos α = 1- 1.14 *10^-10
α = 0.80
Classify the phase-change scenarios according to the direction of the heat flow in each case. No net transfer of heat occurs Heat is transferred from the water to the surroundings Heat is transferred to the water from the surroundings
When working through these problems, think about the heat in terms of movement of the molecules of water.
Heat is transferred from the water to the surroundings --- water molecules slowing down.
Heat is transferred to the water from the surroundings --- water molecules heating up.
a cloud of steam condenses into liquid water - Heat is transferred from the water to the surroundings. Steam has more molecules moving around than liquid water. Therefore the molecules had to slow down, thereby transferring heat to the surroundings.a block of ice sublimates into water vapor - Heat is transferred to the water from the surroundings --- water molecules are heating upa block of ice melts - Heat is transferred to the water from the surroundings. The water molecules are basically not moving. Therefore heat has to be introduced to the molecules, which causes the melting.a puddle of water evaporates - Heat is transferred to the water from the surroundings. The water molecules are moving in the liquid state. However, when more heat is introduced to the liquid, the molecules move more rapidly and evaporate.a puddle of water freezes into ice - Heat is transferred from the water to the surroundings --- water molecules slowing down as they go from a liquid state to a solid state. ABOUT HEAT TRANSFERHeat transfer is the transfer of energy due to the difference of temperature between two different places. The main discussion in heat transfer is how the energy in heat can move places and the rate of transfer under certain conditions. Heat transfer includes the processes of inflow and outflow of heat. In industrial processes, heat transfer is used to achieve the required temperature in the industrial process and maintain the required temperature throughout the process.
Heat transfer from one object to another can occur by conduction, convection, and radiation. The determinant of heat transfer is the temperature difference. The direction of heat transfer starts from a medium with a high temperature to a medium with a lower temperature. Heat transfer can occur with a single process or multiple processes.
Learn more about heat transfer at https://brainly.com/question/13433948.
#SPJ4
A certain light truck can go around a flat curve having a radius of 150 m with a maximum speed of 34.5 m/s. With what maximum speed can it go around a curve having a radius of 60.0 m
With 20.23 ms⁻¹, maximum speed can it go around a curve having a radius of 60.0 m
What's the maximum speed?The highest rate of speed a person can reach is called maximum speed. When athletes alter the magnitude (how quickly they are moving) or direction (or both) of their motion, or both, their acceleration changes as well since acceleration is related to velocity, which has both a magnitude and a direction connected with it.
ac max = V² max / R ....(1)
Inserting given values we get
ac, max = (34.5)² / 150 = 7.935 ms⁻²
For a changed radius of the curve of 60.0 m, the maximum safe speed from (1) becomes
Unew, max= √ac, max R new
Unew, max = √6.826 x 60
Unew, max 1 = 20.23 ms⁻¹, rounded to one decimal place.
To learn more about speed from given link
https://brainly.com/question/13262646
#SPJ4
A 663 g ball strikes a wall at 12.2 m/s and rebounds at 10.4 m/s. The ball is in contact with the wall for 0.046 s. What is the magnitude of the average force acting on the ball during the collision
The Force acting on the ball during collision is 25.9 N.
To calculate the magnitude of the average force, we use the formula below.
F = m(v-u)/t..........Equation 1
Where:
F = Average force acting on the ball
m = mass of the ball
v = Final velocity
u = Initial velocity
t = time.
From the question,
Given:
m = 663 g = 0.663 kgv = 12.2 m/su = 10.4 m/st = 0.046 sSubstitute these given values into equation 1
F = 0.663 (12.2 -10.4 )/0.046
F = 25.9 N
Hence, The Force acting on the ball during collision is 25.9 N
Learn more about force here:
brainly.com/question/12970081
#SPJ4
Deon is running at a velocity of 5.4 meters per second. Deon has a total mass of 95 kilograms—including his helmet, uniform, and pads. If Deon runs directly into Chuck, who has a total mass of 120 kilograms and is standing still, what is the momentum of the Deon-Chuck system after the collision? Assume momentum is conserved.
The law of conservation of momentum states that the momentum of a system is equal and conserved before and after collision. Therefore, the final momentum of the system is 513 kgm/s.
What is the law of conservation of momentum?The law of conservation of momentum states that, for two or more bodies which are present in an isolated system that are acting upon each other, their total momentum remains constant in the system unless an external force is applied on them. The expression for conservation of momentum is:
m₁ u₁ + m₂u₂ = m₁v₁ + m₂v₂
where, m₁ = mass of one object,
m₂ = mass of another object,
u₁ and u₂ are the initial velocities of objects,
v₁ and v₂ are the final velocities of objects.
Here, m₁ = 95kg, m₂ = 120kg
u₁ = 5.4m/s, u₂ = 0m/s (at rest)
m₁ u₁ + m₂u₂ = m₁v₁ + m₂v₂
95 × 5.4 + 120 × 0 = 95 × v₁ + 120 × v₂
513 + 0 = 95 × v₁ + 120 × v₂
Momentum before collision = Momentum after collision
Therefore, the momentum after collision is 513 kgm/s.
Learn more about Momentum here:
https://brainly.com/question/24030570
#SPJ1
Because of the Doppler effect, a light- or sound-emitting object moving toward you has a ________ compared to a stationary object.
Because of the Doppler effect, a light- or sound-emitting object moving toward you has a lower amplitude compared to a stationary object.
The Doppler effect is generally defined as the shift in wave frequency (whether it be sound or light) caused by relative motion between the wave source and the observer. Every time a source wave moves in reference to the observer, this effect can be seen.
The Doppler effect allows astronomers to determine the frequency of light waves as an object moves in relation to the observer. As it approaches you, the frequency decreases and the item exhibits a blueshift. A redshift indicates that an item is travelling away from us.
To know more about Doppler effect
https://brainly.com/question/13229185
#SPJ4
13. Shadrach, a form one student performed an experiment to investigate surface tension. he poured some water on a trough and allowed it to settle he then took a razor blade and gently placed it on the surface of the water in an attempt to make it float but failed give two possible reasons why the experiment failed
Answer:
this because the surface tension was lowered by using an impurity or rising the temp of the water
How do you find the acceleration of a ball rolling down a slope?
The ball accelerates at a constant rate as it moves down the slope because of the constant gravitational force acting on it in a major portion and the rolling tangential force on the object is acting in the smaller form.
Rolling motion of any object occurs when the object starts sliding in a different methods from the other objects such as when the objects starts to roll from the ramp or any other sloppy surface and it rolls down due to the gravitational force and with many other forces such as the rolling tangential force. many forces are acting on the object at the same moment and we are just seeing the gravitational force which is playing a major portion. Hence by this information we can consider that the ball accelerates at a constant rate as it moves down the slope because of the constant gravitational force acting on it in a major portion and the rolling tangential force on the object is acting in the smaller form.
Learn more about Rolling motion:
brainly.com/question/29568301
#SPJ4
A 0.480 kg mass suspended from a spring oscillates with a period of 1.50 s. How much mass must be added to the object to change the period to 2.05 s
The mass added to the object to change the period to 2.05 s is 0.42 kg
What is the time period of an oscillation?
The time taken for an oscillating particle to complete one cycle of oscillation is known as the Period of oscillating particle.
Given :
A 0.480-kg mass suspended from a spring oscillates with a period of 1.50 s.
The formula of the time period is given by:
[tex]T=2\pi \sqrt{m/K}[/tex] ------(1)
where m is the mass and K is the spring constant.
The new time period is given by:
[tex]T'=2\pi \sqrt{m^{'} /K[/tex]-----(2)
where m' is the total mass after the addition and K is the spring constant.
Dividing equation (1) by equation (2).
[tex]T/T'=\sqrt{m/m'}[/tex]
Now, substitute the known terms in the above expression.
[tex]\frac{1.50}{2.05} =\sqrt{0.480/m'}[/tex]
[tex]m'=\frac{0.480}{0.5329}[/tex]
[tex]m'=0.9[/tex] kg
Now, the mass added to the object to change the period to 2.05 s is given by:
m" = 0.9 - 0.480
m" = 0.42 Kg
Thus, 0.42kg of mass must be added to the object to change the period to 2.05s.
To know more about the time period :
https://brainly.com/question/26146375
#SPJ4
Wilbur ran 1-kilometer. Then he ran 500 meters. How many meters did Wilbur run all together?
A) 15,000
B) 1,500
C) 1000
D) 150
a typical gps satellites orbit at an altitude of 2.0 x10^7 m. find (a) the orbital period, and (b) the orbital speed of such a satellite
the orbital period is 7200sec or 2hours and orbital speed is 7,27m/s
(a) The orbital period of a satellite is the time it takes for the satellite to make one full orbit around the Earth. To calculate the orbital period, we can use the equation: T = 2 * pi * (a^3/GM)^(1/2) where T is the orbital period, a is the semi-major axis of the orbit (which is equal to the altitude of the satellite), pi is approximately 3.14, G is the gravitational constant (approximately 6.67 x 10^-11 m^3/kgs^2), and M is the mass of the Earth (approximately 5.98 x 10^24 kg).Plugging in the given altitude of 2.0 x 10^7 m for a and the known values for pi, G, and M, we get:
T = 2 * pi * (2.0 x 10^7 m)^3/ (6.67 x 10^-11 m^3/kgs^2 * 5.98 x 10^24 kg)^(1/2)
Simplifying, we get:
T = 2 * pi * (8.0 x 10^21 m^3/ (4.03 x 10^34 kg*m^3/s^2))^(1/2)
T = 2 * pi * (1.98 x 10^13 s^2/kg)^(1/2)
T = 7200 sec (or 2 hours)
(b) The orbital speed is the distance traveled by the satellite in one hour. We can calculate the orbital speed using the equation v = 2πa/T
Plugging in the values of a and T we get :
v = 2π (2.0 x 10^7 m) / 7200 sec
v = 7,27 m/s
To learn more about satellites here:
https://brainly.com/question/9266911
#SPJ4
Trends are easier to detect when the signal-to-noise ratio is low.
a True
b False
Answer:
I think it's b. False
Explanation:
Roller Coaster Physics Gizmo
With no friction, you can use the relationship between potential and kinetic energy to predict the speed of the car at the bottom of this hill from its starting height. To do this start by setting the kinetic and potential energy equations equal to one another. K= U
1/2mv^2 = mhm
a. Use algebra to solver for the speed. V=
b. With the no friction, does the final speed depend on the mass of the car?
c. With no friction, does the final speed depend on the steepness of the hill?
d. What is the final speed of the car if the height of the hill is 55 cm (. 55m)?
A) Using algebra, the required speed V=(2gh)1/2
B) With the no friction, the final speed does not depend on the mass of the car.
C) With no friction, the final speed does depend on the steepness of the hill.
D) The final speed of the car if the height of the hill is 55 cm is 3.569 m/s.
Given that there is no friction considered. Thus, the total energy of the system can be considered as conserved.
Thus, sum of kinetic and potential energy will be constant.
K = U
mu 2 = mgh ......................................(1)
m = mass of object
v = speed of object
g = acceleration due to gravity = 9.8 m/s2
h = height of object with respect to a reference position
Thus for an object at a height from ground, will have its potential energy converted to kinetic energy during it's descent.
(A) from (1)
mv2 = 2mgh
Thus, v2 = 2gh
v = (2gh)1/2
this, is the velocity of an object from conservation of energy.
(B) with no friction, the enrgy is taken to be conserved. from the answer of (A), we know,
v = (2gh)1/2.
clearly this equation doesn't depend on mass.
thus, final speed doesn't depend on the mass.
(C) Given height of hill , h = 65cm = 0.65 m
from (1), v = (2gh)1/2.
the potential energy of car at the hill top = mgh
this potential energy gets entirely converted to kinetic energy at the bottom of hill due to conservation of energy. Thus
v = (2 x 9.8 x 0.65)1/2
= 3.569 m/s
Thus, the final velocity of the car is 3.569 m/s
To know more about friction here
https://brainly.com/question/31226
#SPJ4
Y’all which ones is incorrect (if there wrong plz tell me what to circle right then) thanks :3
WILL MARK BRAINLIEST FOR THIS :D
CAN SOMEONE PLEASE ANSWER THESE 4 QUESTIONS I WILL NEED IT IN A FEW HOURS , YOU WILL GET BRAINLIEST!!
1.) Compare reflection and refraction. How are they similar and how are they different?
2.) In your own words, describe how ray diagrams can be used to describe if light rays are being reflected or refracted.
3.) What is the formula for the Law of Reflection? Define the variables and explain what it tells us about the motion of light.
4.) What is the formula for Snell's? Define the variables and explain what it tells us about the motion of light.
Answer:
1.)Reflection is the act of light reflecting back when it hits a medium on a plane. Refraction is the process by which light shifts its path as it travels through a material, causing the light to bend. Thus, this is the key difference between reflection and refraction. This phenomenon usually occurs in mirrors.
2.)ray diagrams are a visual representation of the propagation of light. They can help us to understand and visualise multiple situations, such as light being reflected off of a mirror or changing its direction while moving through a lens.
3.)Reflection: The process of sending back the light rays which fall on polished surface is called reflection of light.
Laws of reflection:
(i) The angle of reflection is always equal to the angle of incidence.
(ii) The incident rays, reflected rays and the normal, all lie in the same plane.
4.)Snell’s law formula is expressed as: μ= sin i/sin r
, where i is the angle of refraction, r is the angle of refraction and μ is known as the refractive index of the second medium with respect to the first medium.
A standing wave is set up in a pipe with both ends open. The frequency of its first harmonic is 300 Hz. What is the length of the pipe? Take the speed of sound to be 340 m s–1. Give your answer in meters
When the frequency of a standing wave set up in a pipe (with both ends open) first harmonic is 300 Hz, the length of pipe is 0.567 metres.
Therefore the answer is 0.567 m.
The speed of sound in air is approximately 340 m/s, and the wavelength of the first harmonic of a standing wave in an open pipe is twice the length of the pipe. Therefore, if the frequency of the first harmonic is 300 Hz, the wavelength can be calculated as:
wavelength = speed of sound / frequency
wavelength = (340 m/s) / (300 Hz)
The length of the pipe can be calculated as half the wavelength:
L = wavelength/2
L = (340 m/s) / (2×300 Hz)
L ≈ 0.567 m
So the length of the pipe is 0.68 m
To know more on standing wave
https://brainly.com/question/15128964
#SPJ4
Halp i'm so confused I want to cry....
Three children are throwing a disc in the park. The first child throws the disc 32 m [W 14° S] to the second child, who then throws the disc 15 m [E 62° S]. What is the net displacement of the disc?
*the answer is 32m (W 41 S) Please explain how to do this....
NO LINKS I WILL REPORT U
Answer:
Evidently W 14 S means West and to the South by 14 deg
If you draw the X-Y coordinates and enter this value
Tx1 = - 32 * cos 14 = -31 (along the negative x-axis)
Ty1 = -32 * sin 14 = -7.4 (along the negative y-axis)
Likewise
Tx2 = 15 * cos 62 = 7.04
Ty2 = -15 * sin 62 = -13.2
Tx = -31 + 7.04 = -24
Ty = -7.4 - 13.2 = -20.6
Final distance = (24^2 + 20.6^2)^1/2 = 31.6 m
Direction will be South of West
tan -20.6 / -24 = 41 deg
i need help plssssss
The three key words that have been replaced in the cross - section of a solar panel are:
R - Insulator S - Copper T - BlackThis means that Option A is correct.
What are some parts in a solar panel ?A solar panel, also known as a photovoltaic (PV) panel, is a device that converts sunlight into electricity. It is made up of several different parts that work together to generate electricity. Solar cells are made of silicon and are responsible for converting sunlight into electricity. They are usually arranged in a grid pattern on the panel.
The backsheet is the layer of material that sits on the back of the solar cells. It is responsible for protecting the back of the solar cells from moisture and other environmental factors. It is an insulator and is shown as R.
There are also the copper wires which heat the water and they are painted black as black absorbs heat better. These are labeled S and T respectively.
Find out more on solar panels at https://brainly.com/question/28996669
#SPJ1
What are some benefits of dynamic exercises prior to playing volleyball how it will prepare your body leading to the game?
The benefits of dynamic exercises before playing volleyball and how they will prepare your body for the match are:
Increased Muscle Strength and PowerImproved Mobility and FlexibilityImproved Agility and Reaction TimeImproved Balance and CoordinationImproved Cardiovascular EnduranceExplanation of each of the benefits of dynamic exercises before playing volleyball and its preparationIncreased Muscle Strength and Power: Dynamic exercises help to increase muscle strength and power, which is essential for performing explosive movements required in volleyball.Improved Mobility and Flexibility: Dynamic exercises help to improve mobility and flexibility, which can help to reduce the risk of injury.Improved Agility and Reaction Time: Dynamic exercises help to improve agility and reaction time, which can help you to react quickly and effectively to the game.Improved Balance and Coordination: Dynamic exercises also help to improve balance and coordination, which can help you to perform better and avoid unnecessary injuries.Improved Cardiovascular Endurance: Dynamic exercises help to increase your cardiovascular endurance, which can help you to last longer during the game and maintain high intensity throughout.Learn more about dynamic stretching:
https://brainly.com/question/24842019
#SPJ4
Bird bones have air pockets in them to reduce their weight. This also gives them an average density significantly less than that of the bones of other animals. Suppose an ornithologist weighs a bird bone in air and in water and finds its mass is 47.0 g47.0 g and its apparent mass when submerged is 3.60 g3.60 g (the bone is watertight). What mass of water is displaced
The mass of water displaced when the mass of bird bone in water and air is given, is calculated to be 43.4 g.
Given that,
Weight of bird bone in air = True weight = 47 g
Apparent weight of the bird bone when submerged = 3.6 g
The equation for apparent weight is known to be,
Apparent weight = True weight - Buoyant force
Making Buoyant force as subject, we have,
Buoyant force = 47 g - 3.6 g = 43.4 g
F b = mw × g = (m wat - m air)× g
mw = m wat - m air = 47 g - 3.6 g = 43.4 g
Thus, the mass of the water displaced is 43.4 g.
To know more about mass:
https://brainly.com/question/13073054
#SPJ4
What is momentum Mcq?
L=rp Angular Momentum the linear momentum p. Moment of momentum is another name for angular momentum.
How do you gain traction?List the object's mass and speed in step one. Convert any values into SI units in step two (kg, m, s). Step 3: To calculate an object's momentum, multiply the object's mass and velocity.
Can there be negative momentum?Momentum can go wrong. As a vector quantity with both magnitude and direction, momentum has both. The sign, positive or negative, in physics serves as a cue as to the direction. Positive amounts normally signify a forward or upward motion, whereas negative quantities typically indicate a backward or downward motion.
to know more about momentum here:
brainly.com/question/24030570
#SPJ4
What is momentum?