Answer ALL of the questions. LOOK AT ALL THE PICTUERS .Show your work. if you can show me a picture of your work and the step you did to complete it. HELP ME PLZZ.
BRAINLEST TO I GIVE BRAINLIEST

mean of the sampling distribution of the difference in sample proportions is 0.36.

The best method for the random sampling will be to write the students' names on paper and pick them out of a hat, as each student will have an equal chance of being chosen.

22% of the population of eastern grey squirrels weigh more than 0.5 kg.

36% of the population of western grey squirrels weigh more than 0.5 kg.

Eastern grey squirrel sample size is 60.

There were 120 western grey squirrels in the sample.

Required:

The difference in sample proportions' mean of the sampling distribution (eastern minus western)

The difference of the mean yields the mean of the difference.

Mean = p1 - p2 is the sampling distribution's average for the difference in the sampling proportion from two populations.

Where;

p1 = 22% of the eastern grey squirrel, which equals 0.22.

p2 = 36% of the western grey squirrel, which equals 0.36.

Therefore;

p1 - p2 = 0.22 - 0.36 is the mean.

The right answer is (E) 0.22 - 0.36.

To know more about proportions visit:-

brainly.com/question/29774220

#SPJ4

The average speed of Luna I is 1.78 x 10^-3 kilometers/minute.

To find the average speed of Luna I, we need to divide the total distance traveled (3.8 x 10^5 kilometers) by the total time it took to travel that distance (2.16 x 10^4 minutes). The quotient of these two numbers is 1.78 x 10^-3 kilometers/minute.

It's the ratio of distance covered to the time taken to cover that distance. The unit of speed is distance/time, which in this case is kilometers/minute. The speed of Luna I is in scientific notation, which is a way to express very large or very small numbers in a more manageable form.

Learn more about Speed here:

https://brainly.com/question/17146782

#SPJ4

Yes, polynomial Y^4+4Y^2+5 has zeroes. Its zeroes can be found by factoring or using the quadratic formula: Y = -2 +/- sqrt(4-5) / 2 = -1 +/- sqrt(-1) / 2 = -1 +/- i/2.

[tex]Y^4+4Y^2+5[/tex]

=[tex](Y^2+1)²-3[/tex]

=([tex]\sqrt{Y^2+1-sqrt3}[/tex])([tex]\sqrt{Y^2+1+sqrt3}[/tex])

=(Y+ sqrt3)(Y-sqrt3)(Y+1)(Y-1)

=(Y+ sqrt3)(Y-sqrt3)(Y²-1)

=(Y+ sqrt3)(Y-sqrt3)(Y-1)(Y+1)

=0

Therefore the zeroes are Y=-√3, Y=1, Y=√3, Y=-1

Polynomial Y^4+4Y^2+5 is a fourth degree polynomial equation and can be solved by factoring or using the quadratic formula. To solve this equation by factoring, we need to use the difference of squares method. First, we rewrite the equation as (Y^2+1)²-3. Then we factor out the square of the binomial (Y^2+1): (Y^2+1-sqrt3)(Y^2+1+sqrt3). Next, we expand the first binomial to get (Y+ sqrt3)(Y-sqrt3)(Y+1)(Y-1). Then, we factor out the second binomial from the first two terms to get (Y+ sqrt3)(Y-sqrt3)(Y²-1). Finally, we expand the last binomial to get (Y+ sqrt3)(Y-sqrt3)(Y-1)(Y+1). This results in a product of zero, which means the equation has zeroes. The zeroes are Y=-√3, Y=1, Y=√3, and Y=-1.

Learn more about polynomial here

https://brainly.com/question/11536910

#SPJ4

The exponential function formula for the parent function is found to be

[tex]f(x) = 2^x[/tex]

What is an exponential function?

The formula for an exponential function is [tex]f(x) = a^x[/tex], where x is a variable and a is a constant that serves as the function's base and must be bigger than 0.

The general formula to find an exponential function is [tex]f(x) = ab^x[/tex]

From the given graph, we take two points on the graph : (1,2) and (2,4)

Substituting in the above equation, taking f(x) as y

[tex]ab^1 = 2\\\\ab^2 = 4[/tex]

Solving the above equations, we get

a= 1, b=2

So the parent function  [tex]f(x) = 2^x[/tex].

Now using this function we can graph [tex]f(2x), -3f(x), 2f(2x)\\[/tex].

[tex]f(2x) = 2^{2x} = 4^x\\\\-3f(x) = -3 * 2^x\\2f(2x) = 2 * 4^x[/tex]

Therefore using the Desmos, the above exponential functions are graphed.

To learn more about exponential functions, follow the link.

https://brainly.com/question/30127596

#SPJ1

Considering that the quadrilateral EFGH is similar to quadrilateral IJKL the side LI is calculated to be

The side LI is calculated using the concept of similar polygons. This concept allows for the sides to be proportionally equal to each other.

This implies that the factor used for any side will produce same result

let the factor be r and using side HG and JK to solve for the factor r

HG * r = JK

where

HG = 16

JK = 51

substituting the values and solving for r

HG * r = JK

16 * r = 51

r = 51/16

and HE * r = LI

where HE = 9.6

LI = 9.6 * 51/16

LI = 30.6

hence side LI = 30.6

Learn more about similar polygons at:

https://brainly.com/question/1493409

#SPJ1

A linear inequality that models the total cost of the daily rental c(m) as a function of the total miles driven, m is c(m) ≤ 45 + 0.4 m.

What is linear inequality?

In mathematics, an inequality involving a linear function is referred to as a linear inequality. One of the inequality symbols is found in a linear inequality. In graph form, it displays the non-equal data.

Given:

Nancy Stone has a small company and has negotiated a special rate for rental cars when she and other employees take business trips.

The maximum charge is $45. 00 per day plus $0. 40 per mile.

A linear inequality involves a linear function. It contains one of the symbols of inequality. It exactly looks like a linear equation, with the inequality sign replacing the equality sign.

According to the statement Nancy has negotiated a special rate and the maximum charge is $45.00 per day with the addition of $ 0.40 per mile.

So,

a linear inequality that models the total cost of the daily rental as a function of the total miles driven, m is:

c(m) ≤ 45 + 0.4m

Hence, a linear inequality that models the total cost of the daily rental c(m) as a function of the total miles driven, m is c(m) ≤ 45 + 0.4 m.

To know more about linear inequality, click on the link

https://brainly.com/question/12749528

#SPJ4

The answer is a ≤ 30.

An inequality is a mathematical expression that compares two values or expressions using an inequality operator. In this case, the inequality would be a ≤ 30. This means that the area of the triangle must be less than or equal to 30 square inches.

This can be solved by finding the area of the triangle. To do this, we need to know the lengths of the sides of the triangle. Suppose we have sides p, q, and r. Then the area of the triangle can be found using the formula:

                       a = 1/2 × b × h

where q is the base of the triangle and r is the height. To ensure that the area of the triangle is no more than 30 square inches, the inequality must be satisfied. That is, 1/2 × b × h ≤ 30. This inequality can be rewritten in terms of the side lengths by substituting 1/2 × q × r for h. This gives us a ≤ 30.

To know more about area of Triangle:

brainly.com/question/23945265

#SPJ4

The coordinates of B are (6,0).

The midpoint of a line segment is the point that is exactly halfway between the two endpoints of the segment. For a line segment with endpoints (x1, y1) and (x2, y2), the midpoint is given by the coordinates:

In this problem, we're given that the midpoint is (2, 4) and we need to find the coordinates of point B. Since we know the coordinates of the midpoint, we can set up the equation:

We know that point A = (-2,9) is one endpoint, so we can substitute it into the equation

Solving for x2 and y2, we get x2 = 6 and y2 = 0 which is the coordinates of point B.

Learn more about Midpoint here:

https://brainly.com/question/5566419

#SPJ4

The angles and their relationships are -

a) ∠x = 135° (corresponding angles), ∠y = 135° (vertical angles)

b) ∠y = 45° (liner pair angles), ∠x (not enough information provided)

c) ∠x = 135° (corresponding angles), ∠y = 45° (liner pair angles)

d) ∠x = 45° (liner pair angles), ∠y (not enough information provided)

What is angle pair relationship?

In Geometry, there are five fundamental angle pair relationships:

Complementary Angles

Supplementary Angles

Adjacent Angles

Linear Pair

Vertical Angles

a) In the first diagram -

∠x = ∠a as they are both corresponding angles to each other.

So, ∠x = 135°.

Similarly, ∠y = ∠x as they both are vertically opposite angles to each other.

So, ∠y = 135°.

b) In the second diagram -

∠y + ∠a =180° as they are both form a linear pair of angles.

So, ∠y = 180° - ∠a

∠y = 180° - 135°

∠y = 45°.

Now, ∠x cannot be deduced and no proper information is given in the image.

c) In the third diagram -

∠x = ∠a as they are both corresponding angles to each other.

So, ∠x = 135°.

Now, ∠y + ∠x =180° as they are both form a linear pair of angles.

So, ∠y = 180° - ∠x

∠y = 180° - 135°

∠y = 45°.

d) In the fourth diagram -

∠x + ∠a =180° as they are both form a linear pair of angles.

So, ∠x = 180° - ∠a

∠x = 180° - 135°

∠x = 45°.

Now, ∠x cannot be deduced and no proper information is given in the image.

Therefore, all the angles are and their relationships are found.

To learn more about angle pair relationship from the given link

https://brainly.com/question/1757859

#SPJ1

actual measures : model measures = 12 : 1 .

In mathematics, a ratio shows how many times one number contains another. The comparison or simplified form of two quantities of the same kind is referred to as a ratio. This relation gives us how many times one quantity is equal to the other quantity. In simple words, the ratio is the number that can be used to express one quantity as a fraction of the other ones.

The two numbers in a ratio can only be compared when they have the same unit. We make use of ratios to compare two things. The sign used to denote a ratio is ‘:’.

A ratio can be written as a fraction, say 2/5. We happen to see various comparisons or say ratios in our daily life.

Given,

Actual sign measures 12 inches on each side

Jason's model sign measures 1 inch on each side.

Ration between actual to model sign measurement=

Measurement of actual sign / Measurement of model sign

= 12/1

Ratio = 12:1

Hence, the ratio between actual to model sign measurement is 12:1.

Learn more about ratio here:

https://brainly.com/question/13419413

#SPJ1

The general solution to the given differential equation is y = c₁e⁻t + c₂te⁻t + t².

The given differential equation can be written as y'' - y' - 2y = -2t + 4t², which is a second-order linear differential equation with constant coefficients. To solve this equation, the first step is to solve the associated homogeneous equation, which is y'' - y' - 2y = 0. This homogeneous equation can be solved by using the characteristic equation, r² - r - 2 = 0, which has two roots, r = 2 and r = -1.

The general solution of the homogeneous equation is then y = c₁e²t + c₂e⁻t. To find the particular solution of the non-homogeneous equation, the method of undetermined coefficients is used. Since the non-homogeneous term is 4t², the particular solution of the non-homogeneous equation is yp = t².

Learn more about general solutions here:

https://brainly.com/question/27745371

#SPJ4

Considering  the given triangle, the information given helped to apply similar triangle principle to determine v to be 3.9

This is a term used in geometry to mean that the respective sides of the triangles are proportional and the corresponding angles of the triangles are congruent

Hence assuming the corresponding angles of the triangle are congruent then the side should be in proportions

Examining the figure shows that pair of equivalent sides are

TS and TR , SU and QR

The solution is worked out using sides WX and XV, WY and YU

TS / TR = SU / QR

TS / TR = 1/2 since it is a mid segment

1 / 2 = (19v - 38) / (-5v + 96)

-5v + 96 = 2 * (19v - 38)

-5v + 96 = 38v - 72

96 + 72  = 38v + 5v

168 = 43v

v = 3.9

Learn more about similar triangles here:

https://brainly.com/question/29333623

#SPJ1

Answer:

65?

Step-by-step explanation:

im not to sure but maybe 65

the equation of the desired line is x = 3y + 6.

To find the equation of a line that is parallel to the given line

y = 1\3x + 10

and passes through the point (3,-1), since parallel lines have the same slope.

Therefore, the slope of the desired line is also 1\3.

Since the desired line passes through the point (3,-1), we can use the point-slope formula to write its equation:

y - (-1) = 1\{3}(x - 3)

Simplifying, we get

y + 1 = 1\ 3x - 1

Multiplying both sides by 3, we get

3y + 3 = x - 3

Adding 3 to both sides, we get

3y + 6 = x

Therefore, the equation of the desired line is x = 3y + 6.

To know more about such questions:-

https://brainly.com/question/15874858

A seventh interval is a chord that consists of a triad and the notes that form the seventh chord above the root of the chord. Unless otherwise stated, "7th chord" usually means the dominant 7th chord, i.e. major triad and minor 7th chord.

The 7th interval, simply called 'September', is the pitch difference between the root note and the 7th note of the diatonic scale.

Sounding the seventh above the root of the chord as his fourth note, along with the other three notes of the dominant chord, strengthens the "suspension" inherent in the function of the dominant chord, and the expected chord Increases mitigation of return to tonic.

So instead of playing "G-B-D" (Sol-Si-Re) as the dominant "C" (Do), we play "G-B-D-F" (Sol-Si-Re-Fa).

The harmonic power of the "7th interval" is so strong that some or all of his three other notes in the chord are omitted, allowing them to be visualized in the listener's ear .

In music theory, the minor seventh is one of two intervals spanning seven staff positions. It's the smaller of two sevenths, and it's minor because it spans ten semitones. A major seventh spans 11 degrees. For example, the interval from A to G is a minor seventh. This is because the G note is ten semitones above his A, and his seven staves from A to G. Diminished 7th and increased 7th have the same number of staves, but a different number of semitones (9 and 12 respectively).

Minor sevenths are rare in melodies (especially in openings), but more common than major sevenths. The most famous example, often used in theory classes, occurs between the first two words of the phrase "There's a place for us" in the West Side Story song "Somewhere." Another well-known example occurs between his two notes at the beginning of the introduction to the music of the main theme of Star Trek: The Original Series.

Complete Question:

What is personification class 7th?

Learn more about Interval:

https://brainly.com/question/18914334

#SPJ4

The smallest distance it has to go to get back to the starting tree is [tex]3\sqrt{5}[/tex]when traveling 6 miles to the south before turning 3 miles to the east.

According to Pythagoras's Theorem, the square of the hypotenuse side in a right-angled triangle is equal to the sum of the squares of the other two sides. Perpendicular, Base, and Hypotenuse are the names of this triangle's three sides. The Pythagorean Theorem demonstrates how to calculate the side lengths of a right triangle by adding the areas of three intersecting squares. As the foundation for more intricate trigonometry theories like the Pythagorean theorem's opposite, this theorem is a very helpful tool.

given

by pythagoras theorem :-

shortest distance = [tex]c^{2} = a^{2} + b^{2} \\[/tex]

[tex]c^{2} = 6^{2} + 3^{2} \\c^{2} = 36 + 9\\c^{2} = 45\\c = 3\sqrt{5}[/tex]

The smallest distance it has to go to get back to the starting tree is [tex]3\sqrt{5}[/tex]when traveling 6 miles to the south before turning 3 miles to the east.

To know more about pythagorus theorem visit :-

https://brainly.com/question/14461977

#SPJ1

Answer:

Step-by-step explanation:

The expressions are not equivalent.  A cup of tea costs $3.25.  $3.25t reprensents the total cost for the number of cups of tea (t) in one order.  Subtracting the $1 coupon or adding the coupon as a negative results in the same discount.  But Patty is using the wrong cost for a cup of tea, $3 instead of $3.25.  Resulting in expressions that are NOT equivalent.

There are 3 terms in expression 7[tex]x^{2}[/tex]-5x+5.

Monomials, binomials, trinomials, and polynomials are all examples of algebraic expressions in mathematics. Algebraic expressions are those that are modeled utilizing unknowable constants, coefficients, and variables. A variable can have any value because it is not fixed, unlike a constant, which has a definite value. Monomials, binomials, trinomials, and polynomials are examples of algebraic expressions that are created by combining variables and constants using arithmetic operations. Terms are the components of algebraic expressions that are separated by addition or subtraction. The type of expression—monomial, binomial, trinomial, or polynomial—depends on the number of terms.

An algebraic expression with three terms is called a trinomial.

To learn more about expression here:

https://brainly.com/question/28980347

#SPJ4

"17/8" pounds of apples were left to give to his grandmother.

Since we have given that

The quantity of apples he picked is given by 6.1/2⇒13/2 pounds.

The quantity of apples he picked for his aunt is given by 2.3/4⇒11/4 pounds.

The quantity of apples he picked for his mother is given by 1.5/8⇒13/8 pounds.

So, the total quantity left for his grandmother is given by

first we have to add the quality of apples he picked for his aunt and the number of apples he picked for his mother.

After subtracting from what he picked.

⇒13/2-(11/4+13/8)

⇒13/2-(22+13/8)

⇒13/2-(35/8)

⇒52-35/8

⇒17/8

Hence, 17/8  pounds are left for his grandmother.

To know more about basic maths:

https://brainly.com/question/4721701

#SPJ4

The one-to-one function is obtained as f(x) = 4x + 1 which is a linear function.

A function y = f(x) is defined as a one to one relation between sets X and Y. The set X is called the domain while Y is called the range of f(x).

A function can either have one-to-one or many-to-one mapping.

One-to-one mapping implies unique element in the domain for each element in the range while for many-to-one mapping there are many elements in the domain for one element in the range.

The given functions are y = [2x] , y = x² and f(x) = 4x + 1 respectively.

They can be examined one by one as follows,

(a) y = [2x]

It is a greatest integer function.

At x = 1.1, y = [2 × 1.1] = [2.2] = 2

And, for x = 1.2, y = [2 × 1.2] = [2.4] = 2

It implies for different values of x, the function has same value.

Thus, it is not one-to-one function.

(b)  y = x²

Find values of the function at two different x as,

x = -2, f(x) = (-2)² = 4

And, for x = 2, f(x) = 2² = 4.

It implies for different values of x, the function has same value.

Thus, it is not one-to-one function.

(c) f(x) = 4x + 1

It is a equation of a straight line.

Which implies it has different values for different values of x.

Thus, it is a  one-to-one function.

Hence, out of the given functions only f(x) = 4x + 1 is one-to-one.

To know more about function click on,

https://brainly.com/question/5975436

#SPJ1

The correct answer to the given question is 49. To solve the given problem following steps are followed :

Step 1: 7 power 2 means 7 multiplied by itself 2 times.

Step 2: 7 times 7 is 49.

Step 3: So, the answer is 49.

Comparing two quantities that generate the same result when one is multiplied by a certain amount is known as a multiplicative comparison. Sam, for instance, has twice as many balloons as Sid does. Sid's got three balloons. Sam has two times Sid's amount of balloons. Sam has a total of 6 balloons, which is equal to 2 + 3 + 1.

To know more about power here

https://brainly.com/question/14834821

#SPJ4

The range and the IQR of the weights are 3.3 pounds and 0.95 pounds respectivly.

The sum of all values divided by the total number of values determines the mean (also known as the arithmetic mean, which differs from the geometric mean) of a dataset. The term "average" is frequently used to describe this measure of central tendency.

The value that, when a dataset is arranged, falls exactly in the center is the median. It is a measure of central tendency that distinguishes between the values' lowest and maximum 50%. Depending on whether you have an odd or an even number of data points, there are different processes to take when calculating the median.

The term "standard deviation" (or "[tex]\sigma[/tex]") refers to a measurement of the data's dispersion from the mean. A low standard deviation implies that the data are grouped around the mean, whereas a large standard deviation shows that the data are more dispersed.

a) the range is the difference between the highest and lowest value:

range =7.5-4.15 =3.3 pounds

the IQR is the difference between the third and first quartile

IQR= Q₃ -Q₁ =6.55 - 5.6 = 0.95 Pounds

b) Skewed because the mean and median are not the same value.

c) All values will be multiplied by 16

Mean: 96 ounce

Standard deviation: 10.4 ounce

Quartiles: 89.6 ounce and 104.8 ounce

Median:99.2 ounce

IQR: 15.2 ounce

Range: 52.8 ounce

d) The mean,quartiles and median increase by 30,the result remain unchanged:

Mean: 126 ounce

Standard deviation: 10.4 ounce

Quartiles: 119.6 ounce and 134.8 ounce

Median:129.2 ounce

IQR: 15.2 ounce

Range: 52.8 ounce

e)  The median, quartiles and IQR might not changed,because they are unaffected by an outlier.

To learn more about Mean and Median refer to :

https://brainly.com/question/14837856

#SPJ4

Answer:

Step-by-step explanation:

we know the 30% off the marked price.

so the sale price is 60-60*30%=42

Answer:$42.00

Step-by-step explanation:

A scatter plot is the best graph for comparing two variables.

A scatter plot is a graph that uses dots to represent individual observations of two variables. It is a powerful tool for comparing two variables because it allows us to see the relationship between the two variables and how they are distributed. It also helps to identify any patterns or trends in the data, such as a positive correlation, a negative correlation, or no correlation at all.

Additionally, scatter plots allow us to see outliers, which are data points that are far away from the majority of the data points. This makes it easy to identify any extreme values that may be skewing the data and affecting the overall pattern of the graph. Overall, scatter plots are useful for identifying patterns, trends, and outliers in data sets, making it the best choice for comparing two variables.

Learn more about Scatter Plots here:

https://brainly.com/question/30160562

#SPJ4

The difference between the two polynomials (9x²+8x)-(2x²+3x) is 7x²+5x.

A polynomial is a mathematical statement made up of indeterminates and coefficients that solely includes the operations of addition, subtraction, multiplication, and positive-integer powers of variables. x2 4x + 7 is an example of a polynomial with a single indeterminate x. A polynomial is an expression in mathematics that consists of variables (also known as indeterminates) and coefficients and includes only the operations of addition, subtraction, multiplication, and non-negative integer exponentiation of variables.

Here,

The difference between the two polynomials (9x²+8x)-(2x²+3x) is 7x²+5x.

To know more about polynomial,

https://brainly.com/question/11536910

#SPJ4

The  total number of ways that 3 boys and 3 girls can line up so that no two of the three boys are next to each other is found to be as  144 .

It is given that there are four general arrangements of boys and girls,

Here, the boys can be arranged or rearranged (permuted) among themselves in a total of ,  3 × 2 × 1 = 6 different ways.

Similarly, the three girls can be rearranged among

themselves in 6 ways.

We are given that both the groups can arrange themselves independently .

Therefore,  the number of ways to create any one of the four basic arrangements is 6 × 6 = 36.

Therefore, the number of ways to arrange them is ,

4 × 36 = 144 .

To learn more about arrangements

brainly.com/question/28406752

#SPJ4

WeDeliver: The total cost of sending the parcel with WeDeliver is £64.00.

Total cost is the sum of all costs associated with a particular purchase, project, or investment. It includes the cost of materials, labor, and any other expenses incurred such as taxes, fees, and shipping. Total cost is an important factor in determining whether or not a project or purchase is feasible. When evaluating the total cost, one must consider any associated risks, such as the risk of a market downturn or currency fluctuations.

This is calculated by summing the three dimensions of the cuboid (10 cm + 20 cm + 40 cm) and then multiplying this sum by £0.80.

GoParcels: The total cost of sending the parcel with GoParcels is £48.00. This is calculated by multiplying the total area, in cm, of all 6 faces of the cuboid (10 cm x 20 cm x 2 + 10 cm x 40 cm x 2 + 20 cm x 40 cm x 2) by £0.02.

To learn more about total cost
https://brainly.com/question/2021001
#SPJ1

Answer:

70

Step-by-step explanation:

nk

The length of the chord of the larger circle can be found by taking the square root  [tex](5r)^2 - (2r)^2[/tex] which is equal to r√21, where r is the radius of the smaller circle.

The given problem states that there are two concentric circles with radii in the ratio of 3:5. This means that the radius of the smaller circle is 3r and the radius of the larger circle is 5r. The distance between the center of these two circles is 2r.

Also, it is given that the length of the chord of the larger circle that is tangent to the smaller circle is 40 cm. Using this information, we can find the length of the chord of the larger circle by using the Pythagorean theorem.

The length of the chord of the larger circle is found by taking the square root of [tex](the radius of the larger circle)^2[/tex] - [tex](the distance between the two centers)^2[/tex] which is √21[tex]r^2[/tex]= r√21.

To learn more about the circles at

https://brainly.com/question/28613960?referrer=searchResults

#SPJ4