anna and jade divide 560 zed between them. if jenny gets 3/8 of the money how many zeds will anna get?

The rewritten values of all the values into an equivalent form as fractions is given below.

Part A:

- One and five eighths of value = 13/8

- Negative three halves = -3/2

- Seventeen percent = 17/100

- Negative 1.7 can be written in fraction as -1 - 7/10 = -10/10 - 7/10 = -17/10

Part B:

- One and five eighths = 1.625

- Negative three halves = -1.5

- Seventeen percent = 0.17

- Negative 1.7 = -1.7

Part C:

From greatest to least:

1. 13/8 (which is equivalent to 1.625 as a decimal)

2. -1.5

3. 17/100 (which is equivalent to 0.17 as a decimal)

4. -1.7

Part D:

To determine the order, we converted all the values to either fractions or decimals. Then, we compared them using the following criteria:

- If the numbers have the same sign, we compared their absolute values. The larger absolute value is the greater number.

- If the numbers have different signs, the negative number is always less than the positive number.

Thus, using these criteria, we compared the four given values and listed them from greatest to least.

For more details regarding rational number, visit:

https://brainly.com/question/24540810

#SPJ1

The final expression for f(t) in terms of the unit step function is: f(t) = -2 * u_3(t) + 4 * u_5(t) - 1 * u_7(t). Each term in the piecewise function corresponds to a different "step" in the function's value, which is why we can express it in terms of the unit step function uc(t).

A. Here is a sketch of the graph of the given function f(t):
 2  |
     |            __
     |       __/  
     |  __/      
     |/          
   0-|---|---|---|---|---|---|---|---|---|-> t
         0   3   5   7
B. To express f(t) in terms of the unit step function, we can define a piecewise function using the unit step function uc(t):
   f(t) = 0uc(t) + (-2)uc(t-3) + 2uc(t-5) + uc(t-7)
This means that the function f(t) takes on the value 0 when t is less than 0 (i.e. before the step function is activated), takes on the value -2 between t=3 and t=5 (i.e. when the step function jumps up from 0 to 1), takes on the value 2 between t=5 and t=7 (i.e. when the step function jumps up from 1 to 2), and takes on the value 1 when t is greater than or equal to 7 (i.e. when the step function is fully activated at 2).
Each term in the piecewise function corresponds to a different "step" in the function's value, which is why we can express it in terms of the unit step function uc(t).
First, let's define the unit step function u_c(t), which is a function that takes the value 0 for t < c and the value 1 for t ≥ c. Now, let's express f(t) in terms of u_c(t) and provide a step-by-step explanation.
f(t) is a piecewise function defined as follows:
1. f(t) = 0 for 0 ≤ t < 3
2. f(t) = -2 for 3 ≤ t < 5
3. f(t) = 2 for 5 ≤ t < 7
4. f(t) = 1 for t ≥ 7
We can express f(t) using the unit step function as follows:
Step 1: Write the individual segments of f(t) in terms of u_c(t).
- f1(t) = 0 * u_0(t)
- f2(t) = -2 * u_3(t)
- f3(t) = 2 * u_5(t)
- f4(t) = 1 * u_7(t)
Step 2: Combine the segments by subtracting the previous segments' contributions.
- f(t) = f1(t) + (f2(t) - f1(t)) * u_3(t) + (f3(t) - f2(t)) * u_5(t) + (f4(t) - f3(t)) * u_7(t)
Step 3: Simplify the expression.
- f(t) = 0 * u_0(t) + (-2 - 0) * u_3(t) + (2 - (-2)) * u_5(t) + (1 - 2) * u_7(t)
- f(t) = -2 * u_3(t) + 4 * u_5(t) - 1 * u_7(t)
So, the final expression for f(t) in terms of the unit step function is:
f(t) = -2 * u_3(t) + 4 * u_5(t) - 1 * u_7(t)

Learn more about unit step function here: brainly.com/question/29803180

#SPJ11

The correct answer for the question is,

C. a bell-shaped curve, better known as a normal distribution

We have to given that;

The weights of 1,000 adult men in a county are plotted on a histogram,

Hence, the curve will most probably be a bell-shaped curve, better known as a normal distribution.

So, The correct curve for fit the histogram is,

⇒ a bell-shaped curve, better known as a normal distribution

Learn more about the function visit:

https://brainly.com/question/11624077

#SPJ1

[tex]\sf n=\dfrac{s}{180}+2.[/tex]

[tex]\sf 180(n-2)=s[/tex]

[tex]\dfrac{\sf 180(n-2)}{180} =\dfrac{s}{180} \\\\ \\n-2=\dfrac{s}{180}[/tex]

[tex]\sf n-2+2=\dfrac{s}{180}+2\\ \\ \\\sf n=\dfrac{s}{180}+2[/tex]

-------------------------------------------------------------------------------------------------------  

brainly.com/question/30596312  

brainly.com/question/28282032  

brainly.com/question/28306861  

brainly.com/question/28285756  

brainly.com/question/28306307  

brainly.com/question/30015231  

brainly.com/question/29888440

brainly.com/question/31757124

The zeros of the polynomial P(x) are x = 0, x = (-5 + i√11) / 2, and x = (-5 - i√11) / 2. Factor P completely P(x) = P(x) = x(x - (-5 + i√11) / 2)(x - (-5 - i√11) / 2).

(a) To find the zeros of the polynomial P(x) = x^3 + 5x^2 + 9x, first factor out the common factor x:
P(x) = x(x^2 + 5x + 9)
Now, we have a quadratic equation (x^2 + 5x + 9) to solve for the other zeros. Using the quadratic formula:
x = (-b ± sqrt(b^2 - 4ac)) / 2a
Here, a = 1, b = 5, and c = 9:
x = (-5 ± sqrt(5^2 - 4*1*9)) / 2*1
x = (-5 ± sqrt(25 - 36)) / 2
x = (-5 ± sqrt(-11)) / 2
Since we have a negative value inside the square root, the solutions will be complex:
x = (-5 ± i√11) / 2
So, the zeros of the polynomial P(x) are x = 0, x = (-5 + i√11) / 2, and x = (-5 - i√11) / 2.

(b) To factor P(x) completely, express it in terms of its zeros:
P(x) = x(x - (-5 + i√11) / 2)(x - (-5 - i√11) / 2)

Learn more about polynomials here: brainly.com/question/11536910

#SPJ11

The value of the integral is (cos(1) - 1)/2. To reverse the order of integration, we need to write the limits of integration as a function of y first, then as a function of x.

The limits of y are from 0 to 1, and the limits of x are from y to 1.
So, we can write the integral as:
∫ from 0 to 1 ∫ from y to 1 y cos(x^2) dxdy
Now, we can reverse the order of integration by integrating with respect to x first, then with respect to y.
So, the integral becomes:
∫ from 0 to 1 ∫ from y to 1 y cos(x^2) dx dy
Integrating with respect to x, we get:
∫ from 0 to 1 [sin(x^2)]/2y from y to 1 dy
Now, integrating with respect to y, we get:
∫ from 0 to 1 [(sin(1) - sin(y^2))/2y] dy
Simplifying, we get:
[cos(1) - 1]/2
Therefore, the value of the integral is (cos(1) - 1)/2.

Learn more about function here: brainly.com/question/30721594

#SPJ11

In a test of significance, assuming the null hypothesis is true, the probability of observing the test statistic extreme or more extreme than the observed test statistic (in the way of the alternative hypothesis) is called the p-value.

This value helps us determine whether to reject or fail to reject the null hypothesis. If the p-value is less than or equal to the level of significance, we reject the null hypothesis. If the p-value is greater than the level of significance, we fail to reject the null hypothesis.

Therefore, the correct answer is "the probability the null hypothesis is true."

Visit here to learn more about probability brainly.com/question/32117953

#SPJ11

The overall percentage increase in price is 1.5, which means that the price of the solution has increased by 150%. This means that if the original price of the solution was $300, the new price after the increase would be $750.To find the overall percentage increase in price, we need to use the ratio of ingredients a and b, which is 2:1.

This means that for every 2 units of ingredient a used, 1 unit of ingredient b is used.

Let's assume that the original unit price of ingredient a was $100 and the original unit price of ingredient b was $200. After the increase, the unit price of ingredient a would be $110 (10% increase) and the unit price of ingredient b would be $250 (25% increase).

To find the overall percentage increase in price, we need to calculate the weighted average of the two ingredients based on their ratios. This can be done by multiplying the percentage increase in each ingredient by its weight in the ratio and adding them together.

The weighted average percentage increase in price can be calculated as follows:

[(2/3) x 10%] + [(1/3) x 25%] = (20/30) + (25/30) = 45/30 = 1.5

Therefore, the overall percentage increase in price is 1.5, which means that the price of the solution has increased by 150%. This means that if the original price of the solution was $300, the new price after the increase would be $750.

learn more about percentages here: brainly.com/question/29142213

#SPJ11

5. The zero vector in the vector space M2 is:

0 0 0

0 0 0

The additive inverse is -A = (-1)A where (-1) is the scalar -1.

6. The zero vector in the vector space P3:

[tex]0x^3 + 0x^2 + 0x + 0[/tex] or simply: 0

The additive inverse is -q(x) = (-1)p(x) where (-1) is the scalar -1.

7. It is verified that all of the axioms hold for the given set of polynomial functions, and therefore it is a vector space.

5. The zero vector in the vector space M2,3 is the 2x3 matrix with all entries equal to zero:

0 0 0

0 0 0

The additive inverse of any vector A in M2,3 is the matrix obtained by multiplying A by -1:

-A = (-1)A

where (-1) is the scalar -1.

6. The zero vector in the vector space P3 is the polynomial function with all coefficients equal to zero:

[tex]0x^3 + 0x^2 + 0x + 0[/tex]

or simply:

0

The additive inverse of any polynomial function p(x) in P3 is the polynomial function obtained by multiplying p(x) by -1:

-q(x) = (-1)p(x)

where (-1) is the scalar -1.

7. The set of all fourth-degree polynomial functions given by [tex]ax^4+bx^3+cx^2+dx+c[/tex], where a is not equal to zero, is a vector space with the standard operations of addition and scalar multiplication. To show this, we need to verify that it satisfies the following axioms:

Closure under addition: If p(x) and q(x) are two polynomials in the set, then their sum p(x) + q(x) is also in the set.

Commutativity of addition: For any two polynomials p(x) and q(x) in the set, we have p(x) + q(x) = q(x) + p(x).

Associativity of addition: For any three polynomials p(x), q(x), and r(x) in the set, we have (p(x) + q(x)) + r(x) = p(x) + (q(x) + r(x)).

Existence of additive identity: There exists a polynomial function 0(x) (the zero polynomial) such that for any polynomial p(x) in the set, p(x) + 0(x) = p(x).

Existence of additive inverse: For any polynomial p(x) in the set, there exists a polynomial -p(x) in the set such that p(x) + (-p(x)) = 0(x).

Closure under scalar multiplication: If a is a scalar and p(x) is a polynomial in the set, then ap(x) is also in the set.

Distributivity of scalar multiplication over addition: For any scalar a and any polynomials p(x) and q(x) in the set, we have a(p(x) + q(x)) = ap(x) + aq(x).

Distributivity of scalar multiplication over scalar addition: For any scalars a and b, and any polynomial p(x) in the set, we have (a + b)p(x) = ap(x) + bp(x).

Associativity of scalar multiplication: For any scalars a and b, and any polynomial p(x) in the set, we have (ab)p(x) = a(bp(x)).

Existence of multiplicative identity: There exists a polynomial function 1(x) (the constant polynomial with value 1) such that for any polynomial p(x) in the set, 1(x)p(x) = p(x).

It is easy to verify that all of these axioms hold for the given set of polynomial functions, and therefore it is a vector space.

To know more about vector space, refer to the link below:

https://brainly.com/question/31493334#

#SPJ11

Answer:

see below

Step-by-step explanation:

add ALL angles together =360 & solve for x

net net 38x + 18 =360

x = 9

C = 15x-1 =15*9 -1 =134

The sample mean of 220 would not be considered very unusual or unexpected.

To find the probability of a sample mean being greater than 220, we need to use the formula for the standard error of the mean:

SE = σ/√n

SE = 5.5/√65

SE ≈ 0.68

Then, we can use the z-score formula to find the probability:

z = (X - μ) / SE

z = (220 - 219) / 0.68

z ≈ 1.47

Using a standard normal distribution table, we find that the probability of a z-score being greater than 1.47 is approximately 0.0708. This means that the probability of a sample mean being greater than 220 is about 0.0708 or 7.08%.

To determine whether the given sample mean would be considered unusual, we need to compare it to the population mean and consider the variability of the population. In this case, the sample mean of 220 is only slightly higher than the population mean of 219, and the standard deviation of the population is relatively small at 5.5.

To learn more about probability visit;

https://brainly.com/question/30034780

#SPJ11

The recurrence relation for the number of ways to form postage of n cents with 4-cent, 6-cent, and 10-cent stamps, with order mattering, is P(n) = P(n-4) + P(n-6) + P(n-10), with initial conditions P(0) = 1 and P(n) = 0 for n < 0.

To form postage of n cents, we can use either a 4-cent stamp, a 6-cent stamp, or a 10-cent stamp.

Therefore, the number of ways to form postage of n cents can be calculated by considering the number of ways to form postage of (n-4) cents, (n-6) cents, and (n-10) cents.

Let P(n) denote the number of ways to form postage of n cents with these stamps.

Then we have:

P(n) = P(n-4) + P(n-6) + P(n-10)

This is a recurrence relation for P(n).

The initial conditions for this recurrence relation are:

P(0) = 1 (There is one way to form postage of 0 cents, by using no stamps.)

P(n) = 0 for n < 0 (There are no ways to form negative postage.)

We can also find P(4), P(6), and P(10) directly:

P(4) = 1 (We can use one 4-cent stamp.)

P(6) = 2 (We can use one 6-cent stamp, or two 4-cent stamps.)

P(10) = 4 (We can use one 10-cent stamp, or one 6-cent stamp and one 4-cent stamp, or two 4-cent stamps and one 2-cent stamp, or four 2-cent stamps.)

Using these initial conditions and the recurrence relation, we can calculate P(n) for any positive integer n.

For similar question on initial conditions.

https://brainly.com/question/31585425

#SPJ11

To calculate the weighted mean of student 11's exam scores when exam 4 is weighted three times that of the other 3 exams, we need to first multiply the score of exam 4 for student 11 by 3, and then add up all four exam scores for student 11, multiplied by their respective weights.

Let's denote the exam scores for student 11 as follows: E1, E2, E3, E4 (where E4 is the score for exam 4). The weights for each exam are given in the second sheet of the spreadsheet. Let's denote these weights as W1, W2, W3, W
The weighted mean for student 11 can be calculated as follows:

Weighted Mean = (W1*E1 + W2*E2 + W3*E3 + 3*W4*E4) / (W1 + W2 + W3 + 3*W4)
We plug in the values or student 11 from the spreadsheet to get:

Weighted Mean = (0.15*86 + 0.2*93 + 0.25*78 + 3*0.4*89) / (0.15 + 0.2 + 0.25 + 3*0.4)
Weighted Mean = 243.9 / 1.45
Weighted Mean = 168.28

Therefore, the weighted mean of student 11's exam scores when exam 4 is weighted three times that of the other 3 exams is 168.28.
To calculate the weighted mean of student 11's exam scores with exam 4 weighted three times that of the other 3 exams, you should follow these steps:

1. Locate student 11's scores for exams 1, 2, 3, and 4 in the second sheet of the spreadsheet.
2. Assign the weights: 1 for exams 1, 2, and 3, and 3 for exam 4.
3. Multiply each exam score by its corresponding weight.
4. Add the weighted scores together.
5. Divide the sum by the total sum of weights (1 + 1 + 1 + 3 = 6).

Weighted mean = (Exam1 * 1 + Exam2 * 1 + Exam3 * 1 + Exam4 * 3) / 6
Please note that without the actual spreadsheet and data, I cannot provide you with a specific answer. Once you have the data, follow these steps to calculate the weighted mean for student 11.

To know more about Weighted click here.

brainly.com/question/10069252

#SPJ11

To determine the factors that should be included in the function to satisfy the given conditions, we need to analyze the end behavior of the function. An end behavior refers to the behavior of a function's graph as x approaches positive or negative infinity.

1. Increasing as x approaches negative infinity: This indicates that the graph should rise as we move to the left. This is associated with an odd-degree function with a positive leading coefficient. An example of such a function is f(x) = x^3.

2. Decreasing as x approaches positive infinity: This also indicates that the graph should fall as we move to the right. This is consistent with an odd-degree function with a positive leading coefficient, like f(x) = x^3.

To ensure that the function meets both conditions, we should include a term with an odd exponent and a positive coefficient. This will make the function increase as x approaches negative infinity and decrease as x approaches positive infinity. Some examples include x^3, 5x^5, and 7x^7.

In conclusion, include a term with an odd exponent and a positive coefficient to satisfy the given conditions. This will result in the graph of the function rising to the left (as x approaches negative infinity) and falling to the right (as x approaches positive infinity).

Which factor should be included in the function below so that the graph of the function is increasing as x approaches negative infinity and decreasing as x approaches positive infinity? Select all that apply.

f(x)=(x+4)(x−5)

-0.8

-3x

(x+5)

-(2x+1)

(3x^2+5)

To learn more about  odd-degree function : brainly.com/question/29005721

#SPJ11

The "uppercase" function in C is a built-in function that converts a lower case letter into an uppercase letter. This function is used to ensure consistency in the formatting of text or data.

In programming, letters are represented by their ASCII codes, which are numerical values assigned to each character. The ASCII code for upper case letters ranges from 65 to 90, while the ASCII code for lower case letters ranges from 97 to 122.

The "uppercase" function works by taking a lower case letter as input and returning the corresponding upper case letter, which is achieved by subtracting 32 from the ASCII code of the lower case letter. For example, the ASCII code for the lower case letter 'a' is 97, so the "uppercase" function would return the ASCII code for the upper case letter 'A', which is 65.

Overall, the "uppercase" function is a useful tool in programming for ensuring consistency and formatting of text or data.

Learn more about ASCII here:

brainly.com/question/30267082

#SPJ11

The total number of ways is the product of these combinations: C(100, 10) * C(90, 10) * C(80, 10) * ... * C(20, 10). To divide one hundred people into ten discussion groups with ten people in each group, we can use the concept of combinations.

A combination represents the number of ways to choose items from a larger set, without considering the order of the items. In this case, we can use the formula:

C(n, r) = n! / (r!(n-r)!)

where C(n, r) represents the number of combinations, n is the total number of items, r is the number of items to be chosen, and ! represents the factorial.

For your problem, we'll divide the people into groups sequentially. First, we choose 10 people out of 100 for the first group, then 10 out of the remaining 90 for the second group, and so on. So the total number of ways is the product of these combinations:

C(100, 10) * C(90, 10) * C(80, 10) * ... * C(20, 10)

Calculating these combinations and multiplying them together, we get the total number of ways to divide one hundred people into ten discussion groups of ten people each.

Learn more about discussion here:

https://brainly.com/question/18599469

#SPJ11

The expression cos^2 3x sin^2 3x can be simplified to (1/4)sin^2 6x.

To simplify cos^2 3x sin^2 3x, we can use the identity sin^2 x + cos^2 x = 1 to write:

cos^2 3x sin^2 3x = (1 - sin^2 3x) sin^2 3x

Expanding the right side using the distributive property, we get:

(1 - sin^2 3x) sin^2 3x = sin^2 3x - sin^4 3x

Next, we can use the identity sin 2x = 2 sin x cos x to write:

sin^2 3x - sin^4 3x = sin^2 3x (1 - sin^2 3x)

Now, using the identity cos 2x = 1 - 2 sin^2 x, we can write:

1 - sin^2 3x = cos^2 (3x - π/2)

Substituting this back into the previous equation, we get:

sin^2 3x (1 - sin^2 3x) = sin^2 3x cos^2 (3x - π/2)

Using the identity cos^2 x = 1 - sin^2 x, we can simplify further:

sin^2 3x cos^2 (3x - π/2) = sin^2 3x sin^2 (π/2 - 3x)

Finally, we can use the identity sin (π/2 - x) = cos x to get:

sin^2 3x sin^2 (π/2 - 3x) = (1/4)sin^2 6x

Therefore, we have simplified cos^2 3x sin^2 3x to (1/4)sin^2 6x, using various trigonometric identities.

For more questions like Expression click the link below:

https://brainly.com/question/29583350

#SPJ11

The expression in terms of first powers of cosine is cos²(3x) - cos⁴(3x).

Trigonometric identities are equality conditions that hold for all values of the variables that occur and are defined on both sides of the equivalence. These are identities that, geometrically speaking, involve certain functions of one or more angles.  

They are not to be confused with triangle identities, which are identities that may involve angles but may also involve side lengths or other lengths of a triangle.

To write the expression cos²(3x)sin²(3x) in terms of first powers of cosine, we can use the trigonometric identity:

sin²(θ) = 1 - cos²(θ)

Applying this identity to the given expression:

cos²(3x)sin²(3x) = cos²(3x)(1 - cos²(3x))

Expanding the expression:

= cos²(3x) - cos⁴(3x)

This is the expression in terms of first powers of cosine.

Learn more about power of cosine at https://brainly.com/question/29076195

#SPJ11

The remaining three measures are b ≈ 2.3, A ≈ 41.4 degrees, B ≈ 9 degrees. solve for the remaining three measures of the non-right triangle, we can use the Law of Cosines. The formula is: c^2 = a^2 + b^2 - 2abcos(C).

Using the given measures, we can plug them into the formula and solve for b:
22^2 = 20^2 + b^2 - 2(20)(b)cos(18)
484 = 400 + b^2 - 40bcos(18)
84 = b^2 - 40bcos(18)
We can use the Law of Sines to solve for angles A and angle B. The formula is:
a/sin(A) = b/sin(B) = c/sin(C)
Plugging in the given measures:
20/sin(A) = b/sin(B) = 22/sin(18)
Solving for sin(A):
sin(A) = (20*sin(18))/22
sin(A) ≈ 0.65

Taking the inverse sine:
A ≈ 41.4 degrees
Solving for sin(B):
sin(B) = (b*sin(18))/22
sin(B) ≈ 0.766b
Substituting sin(A) and sin(B) into the equation for b:
84 = b^2 - 40(sin(A)/sin(B))(b)
84 = b^2 - (57.5)b
b^2 - (57.5)b - 84 = 0
Using the quadratic formula:
b ≈ 55.2 or b ≈ 2.3
Since b must be shorter than c (22), the solution is b ≈ 2.3.

Therefore, angle B can be found using the Law of Sines:
20/sin(41.4) = 2.3/sin(B)
sin(B) ≈ 0.154
Taking the inverse sine:
B ≈ 9 degrees
Therefore, the remaining three measures are:
b ≈ 2.3
A ≈ 41.4 degrees
B ≈ 9 degrees

Learn more about non-right triangles here: brainly.com/question/31115601

#SPJ11

The percentage of students who travel are :

Walk = 50%, Cycle = 8.33%, Car = 25% and bus = 16.67%.

Given that,

Total number of students surveyed = 60

Number of students who travel by walk = 30

Percentage of students who walk = 30/60 × 100 = 50%

Number of students who travel by cycle = 5

Percentage of students who cycle = 5/60 × 100 = 8.33%

Number of students who travel by car = 15

Percentage of students who car = 15/60 × 100 = 25%

Number of students who travel by bus = 10

Percentage of students who bus = 10/60 × 100 = 16.67%

Learn more about Percentages here :

https://brainly.com/question/13450942

#SPJ4

The complete question is given below.

60 students are asked the following question in a survey :

How do you travel to school?

Here are the results:

Travel method   No of students

Walk                   30

Cycle                   5

Car                      15

Bus                      10

Complete the pie chart to show this information.

The graph of functions are shown in image.

Now, We have to given that;

Compare the graph to the graph of

⇒ f (x) = x².

And, Functions are,

(5.) g(x) = 6x²

(7.) h(x) = 1/4x²

(9.) m(x) = -2x²

(11.) A(x)= -0.2x²

(13) n(x) = (2x)²

(15.) c(x)=(-1/3x)²

Now, We can draw all the graphs as shown in image.

Thus, By graph we get some of the graph are compressed and some are dispersed through the graph of function f (x) = x².

Therefore,  The graph of functions are shown in image.

Learn more about the function visit:

https://brainly.com/question/11624077

#SPJ1

Answer: Option C (Alpha levels)

Step-by-step explanation:

Using the concept of sine rule, the missing side of the triangle is: 12.05 units

Sine rule is one in geometry that is used to show the relationship between the sides and angles of a triangle. It is given as:

a/sinA = b/sinB = c/sinC

Where:

A, B, C are the angles and a, b and c are the opposite sides to the angles.

The sum of angles in a triangle is 180 degrees.

Thus:

Missing angle of triangle = 180 - (70 + 61)

Missing angle = 49°

Using sine rule, we can easily say that let the missing side be x and as such we have:

x/sin 49 = 15/sin 70

x = (15 * sin 49)/sin 70

x = 12.05 units

Read more about sine rule at: https://brainly.com/question/20839703

#SPJ1

Saturation Point = 80(1 - 0) = 80 thousand units. The graph should display an increasing curve that approaches the saturation point of 80 thousand units.

(a) To find the value of k in the model S = 80(1 - e^(-kt)), we will use the information that 6,000 units were sold in the first year. Since S is in thousands of units, S = 6 when t = 1:

6 = 80(1 - e^(-k * 1))

Now, we solve for k:
6/80 = 1 - e^(-k)
e^(-k) = 1 - 6/80 = 74/80
-k = ln(74/80)
k = -ln(74/80)

(b) To find the saturation point of the product, we find the limit of S as t approaches infinity:

Saturation Point = lim (t→∞) 80(1 - e^(-kt))
As t→∞, e^(-kt)→0
Saturation Point = 80(1 - 0) = 80 thousand units.

(c) To find the number of units sold after 8 years, plug t = 8 into the model:

S(8) = 80(1 - e^(-k * 8))
Round the result to the nearest unit.

(d) To graph the sales function using a graphing utility, simply input the function S(t) = 80(1 - e^(-kt)), where k is the value you calculated in part (a). The graph should display an increasing curve that approaches the saturation point of 80 thousand units.

Learn more about graph here:

brainly.com/question/9511536

#SPJ11

To find the minimum score required for the scholarship, we need to find the score that corresponds to the top 8% of the distribution. So, the minimum score required for the scholarship is 651.

First, we need to find the z-score corresponding to the top 8% of the distribution. We can do this using a standard normal distribution table or a calculator. The z-score corresponding to the top 8% is approximately 1.41.
Next, we can use the formula for z-score to find the corresponding SAT score:
z = (x - mean) / standard deviation
1.41 = (x - 497) / 109
Solving for x, we get:
x = 642.69
Rounding to the nearest whole number, the minimum SAT score required for the scholarship is 643.
Therefore, any student who scores 643 or above on the SAT writing test will be eligible for the scholarship.

To find the minimum score required for the scholarship, we need to determine the cutoff point for the top 8% of SAT writing scores. Since the scores are normally distributed, we can use the mean and standard deviation to calculate this value.
Step 1: Find the z-score corresponding to the top 8%.
To find the z-score, we will use a z-table or a calculator that provides the inverse of the cumulative distribution function. We want the z-score for the 92nd percentile (since we are looking for the top 8%, 100% - 8% = 92%).
Using a z-table or calculator, the z-score for the 92nd percentile is approximately 1.41.
Step 2: Calculate the minimum score using the z-score, mean, and standard deviation.
Now, we'll use the following formula to find the minimum score:
Minimum Score = Mean + (z-score * Standard Deviation)
Minimum Score = 497 + (1.41 * 109)
Minimum Score = 497 + 153.69
Minimum Score ≈ 650.69
Step 3: Round the result to the nearest whole number.
Minimum Score = 651
So, the minimum score required for the scholarship is 651.

learn more about standard deviation here: brainly.com/question/23907081

#SPJ11

The statement is False for cells. A counterexample is statement VI = 3, y = 4. In this case, we have:

Z(c > y) = {c ∈ Z | c > y}

         = {3, 4, 5, ...}

And:

22 > y^2 = 22 > 16 = 6

So, Z(c > y) is not equal to (22 > y^2). To make the statement true, we can change the inequality symbol from ">" to ">=":

VI, y ∈ Z(c >= y) = (22 >= y^2)

Let's consider the following two-coloring of the tiles:

[red][green][red][green]

[green][red][green][red]

[red][green][red][green]

[green][red][green][red]

Each square tile covers one red and one green cell. Therefore, any combination of square tiles placed on the board will cover an equal number of red and green cells.

However, the total number of red cells on the board is odd (9), and the total number of green cells is even (8).

This means that it is impossible to cover the board with square tiles, and hence we have a contradiction. Therefore, the given tiles cannot be put together to make a perfect square.

For more details regarding contradiction, visit:

https://brainly.com/question/30701816

#SPJ4

Jack is picking out some movies to rent, and he is primarily interested in mysteries and foreign films. he has narrowed down his selections to 20 mysteries and 10 foreign films. step 1 of 2: Jack has 27,405 different combinations of 4 movies he can rent from the 20 mysteries and 10 foreign films.

To determine the number of combinations of 4 movies Jack can rent from 20 mysteries and 10 foreign films, you can use the combination formula: C(n, k) = n! / (k!(n-k)!), where n is the total number of options and k is the number of selections.

In this case, there are 30 films in total (20 mysteries + 10 foreign films). So, n = 30, and Jack wants to rent 4 movies, so k = 4. Using the combination formula, C(30, 4) = 30! / (4!(30-4)!) = 30! / (4!26!) = 27,405.

So, there are 27,405 different combinations of 4 movies that Jack can rent from his selection of mysteries and foreign films.

To calculate the number of different combinations of 4 movies that Jack can rent, we need to use the combination formula: nCr = n! / r!(n-r)! where n is the total number of movies (20 mysteries + 10 foreign films = 30), and r is the number of movies Jack wants to rent (4). So the calculation would be: 30C4 = 30! / 4!(30-4)! = 27,405

Visit here to learn more about Combination:

brainly.com/question/29595163

#SPJ11

If the thickness of a uniform wall is halved, the rate of change at which the heat is conducted through the wall is doubled.

The rate at which heat is conducted through a uniform wall is inversely proportional to its thickness. This means that if the thickness is halved, the rate at which heat is conducted will be doubled. This can be explained using the formula for heat conduction through a wall: Q/t = kA (T1 - T2)/d where Q/t is the rate of heat conduction, k is the thermal conductivity of the wall material, A is the area of the wall, T1 and T2 are the temperatures on either side of the wall, and d is the thickness of the wall.

From this formula, we can see that the rate of heat conduction is inversely proportional to the thickness of the wall (d). Therefore, if we halve the thickness of the wall, the rate of heat conduction will be doubled, assuming all other factors remain constant.

To know more about rate of change,

https://brainly.com/question/29518179

#SPJ11

Complete question:

If the thickness of a uniform wall is halved, the rate at which the heat is conducted through the wall is:

decreased by a factor of 4

unchanged

doubled

increased by a factor of 4

cut in half

The simplest type of statistical analysis that would be appropriate to analyze this data is a two-sample t-test or a chi-square test of probability.

These tests can help determine if there is a significant difference in blood pressure between males and females in the sample population. However, it is important to note that correlation does not necessarily imply causation, and other factors such as age, lifestyle, and genetics may also influence blood pressure. The tests mentioned can provide statistical evidence to determine if there is a significant difference in blood pressure between males and females in the sample population. If the p-value of the test is less than the significance level (usually 0.05), we can conclude that there is a significant difference in blood pressure between males and females.

However, it is important to keep in mind that correlation does not necessarily imply causation. Just because there is a significant difference in blood pressure between males and females does not necessarily mean that being male or female is the cause of the difference in blood pressure. Other factors such as age, lifestyle, and genetics may also play a role in determining blood pressure levels.

To know more about probability,

https://brainly.com/question/30034780

#SPJ11

The polynomial of the can not be factored over set of real numbers is x²+4x+5

A polynomial is an expression consisting of variable and coefficient involved mathematical operations like addition and subtraction e.t.c

A quadratic expression is derived by the formula;

x² - (alpha+beta)x + (alpha)(beta)

Where alpha and beta are the roots of the expression.

For a quadratic expression to a real numbers as root, b = (alpha+beta)

c = (alpha)(beta)

For the expression x² +4x+5

there are no factors of 5 that their sum will give 4. Therefore the polynomial that can not be factored by real number is x²+4x+5

learn more about factorization of polynomial from

https://brainly.com/question/25829061

#SPJ1