Answer:
Part (a):
Given:
Angular velocity, w1 = 6.6 rev/s
Moment of inertia, I = 0.24 kg⋅m^2
We know that the angular momentum (L) of a rotating object is given by:
L = I * w
So, the angular momentum of the skater is:
L1 = I * w1 = 0.24 kg⋅m^2 * 6.6 rev/s = 1.584 kg⋅m^2/s
Now, the skater reduces his rate of rotation to w2 = 5.2 rev/s.
To find his new angular momentum, we use the same equation:
L2 = I * w2 = 0.24 kg⋅m^2 * 5.2 rev/s = 1.248 kg⋅m^2/s
Therefore, the angular momentum of the skater spinning at 5.2 rev/s is 1.248 kg⋅m^2/s.
Part (b):
Let the new moment of inertia be I2.
The conservation of angular momentum tells us that the initial and final angular momenta of the skater must be equal.
So, we can use the equation:
I1 * w1 = I2 * w2
where w1 = 6.6 rev/s, w2 = 0.75 rev/s, and I1 = 0.24 kg⋅m^2.
Solving for I2, we get:
I2 = I1 * w1 / w2 = 0.24 kg⋅m^2 * 6.6 rev/s / 0.75 rev/s = 2.112 kg⋅m^2
Therefore, the value of his moment of inertia is 2.112 kg⋅m^2.
Part (c):
Given:
Initial angular velocity, w1 = 6.6 rev/s
Final angular velocity, w2 = 3.25 rev/s
Time, t = 19 s
We can use the equation:
ΔL = L2 - L1 = I * Δw
where ΔL is the change in angular momentum, L1 and L2 are the initial and final angular momenta, I is the moment of inertia, and Δw is the change in angular velocity.
The skater's initial angular momentum (L1) is given by:
L1 = I * w1 = 0.24 kg⋅m^2 * 6.6 rev/s = 1.584 kg⋅m^2/s
His final angular momentum (L2) is:
L2 = I * w2
We need to find the magnitude of the average torque (τ) that was exerted.
We know that torque (τ) is given by:
τ = ΔL / Δt
where ΔL is the change in angular momentum and Δt is the time over which the change occurred.
So, we can rewrite the equation for angular momentum as:
ΔL = τ * Δt
Substituting this into the equation for torque, we get:
τ = ΔL / Δt = (L2 - L1) / t
Substituting the given values, we get:
τ = (I * Δw) / t = (I * (w2 - w1)) / t
τ = (0.24 kg⋅m^2 * (3.25 rev/s - 6.6 rev/s)) / 19 s
Explanation:
what does a red flag with a diagonal white stripe mean? a tugboat is towing a barge astern snorkeling or diving activities nearby a small craft advisory is in effect a fallen water skier is in the water
A red flag with a diagonal white stripe is a maritime signal flag indicating that there is a diver or snorkeler in the water. This flag is also known as the "Alpha Flag." It is flown from a vessel to signal to other vessels in the area that there is someone in the water, and to exercise caution to avoid any potential danger.
In the context of the other scenarios mentioned, if a tugboat is towing a barge astern, it would be important for the tugboat crew to signal that there is a diver or snorkeler in the water, to ensure that other vessels give them a wide berth and do not accidentally cause harm. Similarly, if there are snorkeling or diving activities nearby, this flag would be used to signal to other boats in the area to be aware of the presence of people in the water.
If a small craft advisory is in effect, it would be important for all boats to exercise caution and follow any signals or warnings from other vessels. Finally, if a fallen water skier is in the water, the red flag with a diagonal white stripe would not be the appropriate signal to use, as it is specifically for indicating the presence of a diver or snorkeler. In this case, the proper signal would be a tow line or flag indicating that a person is in the water and in need of assistance.
Learn more about tugboat here:
brainly.com/question/29148741
#SPJ11
a standing wave of frequency 5 hertz is set up on a string 2 meters long with nodes at both ends and in the center. find the speed of the string
The speed of the string is 6.67 m/s.
The speed of a wave on a string is given by the equation:
v = √(F_T/μ)
where F_T is the tension in the string and μ is the linear mass density of the string.
For a standing wave on a string that is fixed at both ends, the frequency is given by:
f = (n/2L) * v
where n is the number of nodes (or anti-nodes) in the standing wave, L is the length of the string, and v is the speed of the wave.
In this case, the string is 2 meters long with nodes at both ends and in the center, so there are 3 nodes in total. Therefore, n = 3.
The frequency of the standing wave is given as 5 Hz.
We can use the above equations to find the speed of the string:
f = (n/2L) * v
v = (2L * f) / n
v = (2 * 2 m * 5 Hz) / 3
v = 6.67 m/s
Therefore, the speed of the string is 6.67 m/s.
Learn more about frequency ,
https://brainly.com/question/5102661
#SPJ4
what do the long-dashed and short-dashed lines step 2 represent in terms of energy and wavelength? does this molecule absorb just one wavelength of light?
The long-dashed and short-dashed lines in step 2 represent the energy levels of the molecule. The long-dashed line represents the higher energy level and the short-dashed line represents the lower energy level.
When the molecule absorbs light, it gains energy and moves from the lower energy level to the higher energy level. This transition can occur at a specific wavelength of light, which is known as the absorption wavelength. Therefore, this molecule absorbs light at a specific wavelength, but the absorption can result in the molecule being in different energy levels.
The long-dashed lines represent a higher energy level and shorter wavelength, while the short-dashed lines represent a lower energy level and longer wavelength. This molecule can absorb more than one wavelength of light, as both the long-dashed and short-dashed lines indicate different energy levels and wavelengths.
To know more about wavelength of light, refer
https://brainly.com/question/10728818
#SPJ11
The shaft is made from a solid steel section AB and a tubular portion made of steel and having a brass core. If it is fixed to a rigid support at A, and a torque of T = 50 lb.ft is applied to it at C, determine the angle of twist that occurs at C and compute the maximum shear stress and maximum shear strain in the brass and steel. Given Gst = 11,500 ksi and Gbr = 5600 ksi.
Magnitude of angle of twist that occurs at C is 0.115°
How to explain the magnitudePhysicists use the term "magnitude" to refer to the "distance or quantity" of anything. In the context of motion, it represents the direction and/or scale of such motion.
From the information, the shaft is made from a solid steel section AB and a tubular portion made of steel and having a brass core. If it is fixed to a rigid support at A, and a torque of T = 50 lb.ft is applied to it at C.
The angle will be:
= 0.32 × 48.45
= 1.55 lb
The magnitude of angle will be:
= 0.001 + 0.001
= 0.002
= 0.115 approximately
Learn more about magnitude on
https://brainly.com/question/30337362
#SPJ1
how to draw an operational amplifier for a summing(adder) circuit with 4 inputs and same polarity voltages
Draw an op-amp with 4 input resistors connected to the inverting input, and a feedback resistor to the non-inverting input.
To draw a summing (adder) circuit with an operational amplifier for 4 inputs with the same polarity, begin by drawing the op-amp symbol, which looks like a triangle with the inverting input (-) on the top and the non-inverting input (+) on the bottom.
Connect 4 input resistors, one for each input voltage, to the inverting input. The other ends of the input resistors should be connected to their respective input voltage sources.
Next, connect a feedback resistor between the output and the inverting input. Finally, connect the non-inverting input to ground to complete the circuit.
For more such questions on input, click on:
https://brainly.com/question/29247736
#SPJ11
a mass m is hanging below a ceiling, supported by 2 strings as shown in the diagram below. t1 and t2 are the magnitudes of the tensions in the 2 strings. what is the correct formula for the relationship between t1 and t2?
The correct formula for the relationship between t1 and t2 is t1 = t2 + mg, where m is the mass of the object and g is the acceleration due to gravity.
In this scenario, the mass is being supported by two strings, each exerting a tension force on the mass. Let's assume that the mass is not accelerating, which means that the net force acting on the mass is zero.
To determine the relationship between t1 and t2, we need to consider the forces acting on the mass. We know that the weight of the mass (mg) is acting downwards, so there must be two tension forces (t1 and t2) acting upwards to balance out the weight.
If we consider the vertical direction, we can write:
t1 + t2 - mg = 0
Simplifying this equation, we get:
t1 = t2 + mg
Therefore, the correct formula for the relationship between t1 and t2 is t1 = t2 + mg. This formula tells us that the tension in one string (t1) is equal to the tension in the other string (t2) plus the weight of the object (mg).
learn more about tension force
https://brainly.com/question/30687736
#SPJ11
A.) A diamond (n = 2.42) is lying on a table. At what angle of incidence θ is the light reflected from one of the facets of the diamond completely polarized?
B. ) For the example of refraction illustrated in the drawing θ1 = 48° and θ2 = 71.0°. Calculate the ratio n1/n2 of the indices of refraction of the two materials.
Therefore, there is no angle of incidence at which light reflected from the diamond will be completely polarized.
A) For light incident on a diamond at an angle greater than the critical angle, the reflected light will be completely polarized. The critical angle is given by:
sin θc = n2/n1
where n1 is the refractive index of the medium the light is coming from (air in this case) and n2 is the refractive index of the diamond.
Substituting n1 = 1 and n2 = 2.42, we get:
sin θc = 2.42/1
sin θc = 2.42
B) The ratio of the indices of refraction of the two materials is given by:
n1/n2 = sin θ2 / sin θ1
Substituting the given values, we get:
n1/n2 = sin 71.0° / sin 48°
n1/n2 = 0.945 / 0.743
n1/n2 = 1.27 (rounded to two significant figures)
To know more about refraction,
https://brainly.com/question/26528081
#SPJ11
42. Galaxy Stuff. In the chapters on stars, we learned why
we are "star stuff." Based on what you've learneq in this
chapter, explain why we are also "galaxy stuff." does the
fact that the entire galaxy was involved in bringing forth life
on Earth change your perspective on Earth or on life in any way? if so , how? if not, why not?
We are "galaxy stuff" because the elements that make up our bodies, such as carbon, oxygen, and iron, were forged inside stars through nuclear reactions.
These stars eventually exploded, scattering their enriched materials into space, which eventually came together to form our galaxy, including Earth. Recognizing our connection to the entire galaxy can broaden our perspective on Earth and life, highlighting the interdependent nature of our existence.
We are "galaxy stuff" just like we are "star stuff" as the material that makes up our bodies was originally created inside stars that lived and died long before our solar system formed .
And was then recycled through the Milky Way galaxy's interstellar medium until it became part of the gas and dust from which our solar system and Earth formed.
And reminding us of the fragile and precious nature of life on Earth and the need to protect and preserve our planet and its ecosystems.
To know more about galaxy stuff refer here:
https://brainly.com/question/2905713
#SPJ11
A capacitor with capacitance 6.00x10^-5 F is charged by connecting it to a 12.0V battery. The capacitor is disconnected from the battery and connected across an inductor with L=1.50H
A) WHat are the angular frequency w of the electrical oscilations (the time for one oscilation)?\
B) What is the intioanl charge in the capacitor?
c) How much energy is initially stored in the capacitor?
d) What is the charge on the capacitor 0.0230s after the connection to the inductor is made? Interpret the sign of your answer.
e) At the time given in part (d), what si the current in the inductor? Interpret the sign of your answer.
f) At the time given in part (d), how much electrical energy is stored in the capacitor and how much is stored in the inductor?
A) The angular frequency w of the electrical oscilations are 503.3 rad/s.
B) The initial charge in the capacitor is [tex]7.20x10^-4[/tex]
C) [tex]E = 1/2 (6.00x10^-5 F)(12.0 V)^2 = 4.32x10^-3 J[/tex] energy is initially stored in the capacitor.
D) [tex]Q = (7.20x10^-4 C)cos((503.3 rad/s)(0.0230 s)) = 6.18x10^-4 C[/tex] is the charge on the capacitor 0.0230s after the connection to the inductor is made and the negative sign indicates that the charge on the capacitor is decreasing with time.
E) [tex]I = (7.20x10^-4 C)/(503.3 rad/s)(1.50 H)sin((503.3 rad/s)(0.0230 s)) = -3.86x10^-4 A[/tex] is the current in the indicator and the negative sign indicates that the current is flowing in the opposite direction to the direction assumed in the circuit diagram.
F) The total energy is conserved and the sum of the energies stored in the capacitor and the inductor is equal to the initial energy stored in the capacitor.
A) The angular frequency of the electrical oscillations is given by the formula w = 1/sqrt(LC), where L is the inductance and C is the capacitance. Substituting the given values, we get:
w = [tex]1/\sqrt{(1.50 H)(6.00x10^-5 F)}[/tex] = 503.3 rad/s
B) The initial charge in the capacitor is given by Q = CV, where V is the voltage of the battery. Substituting the given values, we get:
Q = [tex](6.00x10^-5 F)(12.0 V)[/tex] = [tex]7.20x10^-4[/tex] C
C) The initial energy stored in the capacitor is given by the formula E = 1/2 [tex]CV^2[/tex]. Substituting the given values, we get:
[tex]E = 1/2 (6.00x10^-5 F)(12.0 V)^2 = 4.32x10^-3 J[/tex]
D) The charge on the capacitor at time t is given by the formula Q = Q0cos(wt), where Q0 is the initial charge. Substituting the given values and t=0.0230s, we get:
[tex]Q = (7.20x10^-4 C)cos((503.3 rad/s)(0.0230 s)) = 6.18x10^-4 C[/tex]
The negative sign indicates that the charge on the capacitor is decreasing with time.
E) The current in the inductor at time t is given by the formula I = (Q0/wL)sin(wt), where Q0 is the initial charge and L is the inductance. Substituting the given values and t=0.0230s, we get:
[tex]I = (7.20x10^-4 C)/(503.3 rad/s)(1.50 H)sin((503.3 rad/s)(0.0230 s)) = -3.86x10^-4 A[/tex]
The negative sign indicates that the current is flowing in the opposite direction to the direction assumed in the circuit diagram.
F) The energy stored in the capacitor and the inductor at time t is given by the formulas:
[tex]Ec = 1/2 CV^2cos^2(wt)[/tex]
[tex]Ei = 1/2 LI^2sin^2(wt)[/tex]
Substituting the given values and t=0.0230s, we get:
[tex]Ec = 1/2 (6.00x10^-5 F)(12.0 V)^2cos^2((503.3 rad/s)(0.0230 s)) = 3.96x10^-3 J[/tex]
[tex]Ei = 1/2 (1.50 H)(3.86x10^-4 A)^2sin^2((503.3 rad/s)(0.0230 s)) = 3.96x10^-3 J[/tex]
Thus, the total energy is conserved and the sum of the energies stored in the capacitor and the inductor is equal to the initial energy stored in the capacitor.
To know more about angular frequency , refer here:
https://brainly.com/question/30885221#
#SPJ11
the efficiency of an engine ismultiple select question.ratio of heat exhausted to heat intake.the total amount of work performed.the ratio of work done to energy input.always less than one.
The efficiency of an engine can be described as the ratio of work done by the engine to the energy input provided to it. This means that the efficiency of an engine is the amount of useful work it produces compared to the amount of energy it consumes. It is often expressed as a percentage, where 100% efficiency would mean that all of the energy input is converted into useful work.
In terms of the given options, the efficiency of an engine is not the ratio of heat exhausted to heat intake. Instead, this is referred to as the thermal efficiency of an engine. The total amount of work performed by an engine is related to its efficiency, but it is not the same thing. Finally, the ratio of work done to energy input is indeed a correct way to express the efficiency of an engine.
It is important to note that the efficiency of an engine is always less than one, as there will always be some energy lost due to factors such as friction, heat loss, and incomplete combustion. Improving the efficiency of engines is a key goal in many industries, as it can lead to reduced fuel consumption and lower emissions.
Learn more about efficiency here:
https://brainly.com/question/7672500
#SPJ11
dust obscures visible light from distant stars. therefore, how can astronomers confidently measure the rotation curve of the milky way?
Astronomers can confidently measure the rotation curve of the Milky Way by using radio waves and infrared observations, which can penetrate dust and provide accurate measurements.
Visible light from distant stars is often obscured by dust in the Milky Way, making it difficult for astronomers to study the galaxy using traditional optical methods. However, radio waves and infrared observations can pass through the dust, allowing astronomers to obtain accurate measurements of the positions and velocities of stars and gas clouds.
By observing these components in different parts of the galaxy, astronomers can plot the rotation curve of the Milky Way, which describes the relationship between the distance from the galactic center and the orbital speed of its components.
Although dust obscures visible light from distant stars, astronomers can confidently measure the rotation curve of the Milky Way using radio waves and infrared observations, which can penetrate the dust and provide accurate information about the positions and velocities of stars and gas clouds in the galaxy.
To know more about Milky Way, visit;
https://brainly.com/question/13956361
#SPJ11
a ball at the end of a string of length 0.94 m rotates at a constant speed in a horizontal circle. it makes 8.1 rev/s. what period of the ball's motion?
suppose the string you are using is rated for no more than 60.0 n (approx 12 lb ). how fast could you fly your model plane before the string breaks?
the maximum speed at which the model plane can fly before the string breaks is approximately 23.0 m/s
Calculating the tension in the string at the plane's top speed will allow us to estimate the fastest the model plane can fly before the string snaps. We may use this number to determine the maximum speed of the plane by assuming that the string can withstand a maximum tension of 60.0 N.
Let's say that the model plane has mass m and a top speed of v. Newton's second law of motion may be used to determine the tension in the string at the plane's top speed:
Tension is equal to m*(v2/R) + mg.
where g is the acceleration brought on by gravity and R is the radius of the plane's circular path.
We may assume that the tension in the string is equal to its maximum value of 60.0 N as we are trying to determine the maximum speed of the plane. Rearranging the equation will allow us to find v:
(Tension - mg) * R / m = sqrt(v)
Tension, R, m, and g values are substituted, and the result is:
v is equal to sqrt((60.0 N - (m * 9.81 m/s2))
learn more about string breaks here:
https://brainly.com/question/30778960
#SPJ11
Evaluate the integral. (Remember to use absolute values where appropriate. Use CC for the constant of integration.)
∫(x2−x+28/x3+7x)dx
According to the question the solution to the original integral is x3/3 – x2/2 + 28 ln|x| - 7x + C
What is original integral?An original integral is a type of mathematical problem that involves the evaluation of an integral, which is a mathematical expression that represents the area under a curve. It is one of the basic operations in calculus, and is used to calculate the area, volume, or arc length of a given shape or function. Integrals are typically computed using integration techniques, such as substitution, integration by parts, and integration by substitution. The integral symbol (∫) is used to denote an integral.
The integral can be solved by breaking the integrand into two parts:
∫(x2−x)dx + ∫(28/x3+7x)dx
For the first part, we can use integration by parts to solve the integral. Let u = x2 and dv = dx. Then du = 2x dx and v = x.
∫(x2−x)dx = x3/3 – x2/2 + C
For the second part, we can use partial fractions to solve the integral.
Let A/x3 + B/x + C = 28/x3 + 7x
Comparing coefficients of x3, we have A = 28.
Comparing coefficients of x, we have B = -7.
Therefore,
∫(28/x3+7x)dx = 28 ln|x| - 7x + C
Finally, the solution to the original integral is:
∫(x2−x+28/x3+7x)dx = x3/3 – x2/2 + 28 ln|x| - 7x + C.
To learn more about integral
https://brainly.com/question/31655119
#SPJ4
how far to the left of the pivot must a 4.0 kg cat stand to keep the seesaw balanced? express your answer to two significant figures and include the appropriate units.
To keep the seesaw balanced, the torque on both sides of the pivot must be equal. Assuming that the pivot is in the middle of the seesaw, the torque on the left side of the pivot must be equal to the torque on the right side of the pivot.
The torque is calculated by multiplying the force by the distance from the pivot. Since the seesaw is balanced, the total force on each side of the pivot must be equal. Let's call this force "F".
On the left side of the pivot, we have a 4.0 kg cat standing at a distance "d" from the pivot. The torque on this side is then: T_left = F * d
On the right side of the pivot, we have an unknown weight (let's call it "W") standing at a distance "x" from the pivot. The torque on this side is:
T_right = F * x
Since the seesaw is balanced, T_left = T_right. Therefore:
F * d = F * x
Dividing both sides by F:
d = x
So the distance the cat must stand from the pivot is equal to the distance the unknown weight is from the pivot. We don't know the weight or the distance, but we know that they must be equal. The cat must stand the same distance from the pivot as the unknown weight. We don't know the exact distance, but it must be equal to keep the seesaw balanced.
To know more about seesaw balanced visit:-
https://brainly.com/question/31090053
#SPJ11
John rode 3,150 m at an average speed of 350 m/min. If he
had ridden at average of 375 m/min instead, how much sooner
would it have taken?
sed
If John had ridden at an average speed of 375 m/min, he would have completed the distance 0.6 minutes (or 36 seconds) sooner than he did at 350 m/min.
To calculate how much sooner John would have completed the distance if he had ridden at 375 m/min instead of 350 m/min, we need to use the formula:
time = distance/speed
Using this formula, we can calculate the time it took John to ride 3,150 m at 350 m/min:
time at 350 m/min = 3,150 / 350 = 9 minutes
To calculate the time it would have taken John to ride the same distance at 375 m/min, we can use the same formula:
time at 375 m/min = 3,150 / 375 = 8.4 minutes
It's worth noting that this calculation assumes a constant speed throughout the entire distance, which may not be the case in real-world scenarios. Additionally, factors such as terrain, wind, and rider fatigue can also affect the actual time it takes to complete a distance.
To learn more about average speed
https://brainly.com/question/12322912
#SPJ4
A baseball is thrown upward from the ground with an initial speed of 30 m/s. What is the maximum height it reaches? (Assume acceleration due to gravity is -9.8 m/s^2 and neglect air resistance.)
a certain 60.0 hz ac power line radiates an electromagnetic wave having a maximum electric field strength of 29.3 kv/m. (a) what is the wavelength of this very low frequency electromagnetic wave?
The wavelength of this very low-frequency electromagnetic wave is approximately 5.00 x 106 meters.
To find the wavelength of the electromagnetic wave, we can use the formula:
wavelength = speed of light / frequency
The speed of light is approximately 3.00 x 108 m/s. We are told that the frequency of the AC power line is 60.0 Hz.
So,
wavelength = 3.00 x 108 m/s or 60.0 Hz
wavelength = 5.00 x 106 m
So, the wavelength of this very low-frequency electromagnetic wave is approximately 5.00 x 106 meters.
To know more about electromagnetic wave visit:
https://brainly.com/question/3101711
#SPJ11
some fishing boats run streamers to buoys that trail 150 feet or so from the boat to deter birds. what is this designed to do?
Using streamers attached to buoys as a bird deterrent system on fishing boats is an effective measure to maintain healthy bird populations and preserve marine ecosystems. It also benefits the fishing industry by reducing gear damage and loss, making it a valuable practice for both environmental conservation and economic sustainability.
Fishing boats run streamers to buoys trailing approximately 150 feet from the boat as a bird deterrent system. This method is designed to protect both birds and fish stocks by preventing birds from becoming entangled in fishing gear, such as longlines, nets, or hooks. By keeping birds at a safe distance, the risk of injury or mortality is reduced, promoting healthy bird populations and ecosystems.
When birds see the streamers, they perceive them as obstacles and are less likely to approach the fishing gear. As a result, the fishing process becomes more sustainable and efficient, with fewer bycatch incidents involving birds. This also reduces the chances of damaged or lost fishing gear, saving resources for the fishing industry.
Learn more about environmental conservation here:
https://brainly.com/question/27439044
#SPJ11
A 10 kg rotating disk or radius 0.25 m has an angular momentum of 0.45 kg-m'/s. What is the angua speed of the disk? ANS: 1.44 rad/s A solid, horizontal cylinder of mass 10 kg and radius 1 meter rotates with an angular speed of 7 rad/s about a fixed vertical axis through its center. A 0.25 kg piece of putty is dropped vertically onto the cylinder at a point 0.9 meter from the center of rotation and sticks to the cylinder. Determine the final angular speed of the system. ANS: 67 rad/s 9) 10) A skater has a moment of inertia of 100 kg-m2 when his arms are outstretched and a moment of inertia of 75 kg-m2 when his arms are tucked in close to his chest. If he starts to spin at an angular speed of 12.6 rad/s with his arms outstretched, what will his angular speed be when they are tucked in? ANS: 16.8 rad/s
To solve this problem, we can use the conservation of angular momentum, which states that the angular momentum of a system remains constant unless an external torque acts on it.
10 kg rotating disk:
The angular momentum of the disk is given by:
L = Iω
where L is the angular momentum, I is the moment of inertia, and ω is the angular speed. We are given that L = 0.45 kg-m2/s and I = 0.5MR2 = 0.5(10 kg)(0.25 m)2 = 0.3125 kg-m2.
Substituting these values, we get:
0.45 kg-m2/s = (0.3125 kg-m2)ω
Solving for ω, we get:
ω = L/I = 0.45 kg-m2/s / 0.3125 kg-m2 = 1.44 rad/s
Therefore, the angular speed of the disk is 1.44 rad/s.
Solid cylinder with putty:
The initial angular momentum of the cylinder is given by:
L1 = I1ω1 = (1/2)MR12ω1
where M is the mass, R is the radius, and ω1 is the initial angular speed. We are given that M = 10 kg, R = 1 m, and ω1 = 7 rad/s, so:
L1 = (1/2)(10 kg)(1 m)2(7 rad/s) = 35 kg-m2/s
When the putty is dropped onto the cylinder, it sticks to the cylinder and rotates with it. The final angular momentum of the system is given by:
L2 = I2ω2 + mvr
where I2 is the moment of inertia of the system after the putty is added, ω2 is the final angular speed, m is the mass of the putty, v is its velocity, and r is the distance from the axis of rotation to the point where the putty lands. We are given that m = 0.25 kg, r = 0.9 m, and v = 0 (since the putty lands vertically). The moment of inertia of a cylinder and a point mass is given by:
I2 = (1/2)MR2 + mr2
Substituting the given values, we get:
I2 = (1/2)(10 kg)(1 m)2 + (0.25 kg)(0.9 m)2 = 2.025 kg-m2
Substituting into the equation for angular momentum, we get:
L2 = (2.025 kg-m2)ω2
Since angular momentum is conserved, we have:
L1 = L2
Substituting the values we found for L1 and I2, we get:
35 kg-m2/s = (2.025 kg-m2)ω2 + (0.25 kg)(0 m/s)(0.9 m)
Solving for ω2, we get:
ω2 = (35 kg-m2/s - 0)/(2.025 kg-m2) = 17.28 rad/s
Therefore, the final angular speed of the system is 17.28 rad/s.
Skater with outstretched arms:
The initial angular momentum of the skater is given by:
L1 = I1ω1 = 100 kg-m2(12.6 rad/s) = 1260 kg-m2/s
The final moment of inertia with arms tucked in is I2 = 75 kg-m2, so the final angular momentum is:
L2 = I2ω2
Since angular momentum is conserved.
To know more about Angular momentum please visit
https://brainly.com/question/31768776
#SPJ11
A charged paint is spread in a very thin uniform layer over the surface of a plastic sphere of diameter 20.0 cmcm , giving it a charge of -19.0 μCμC . Part A: Find the electric field just inside the paint layer. Part B: Find the electric field just outside the paint layer. Part C: Find the electric field 7.00 cm outside the surface of the paint layer.
The electric field just inside the paint layer is 0 N/C, as the electric field inside a conductor is zero.
Part B: The electric field just outside the paint layer can be calculated using the formula E = kQ/r^2, where E is the electric field, k is the electrostatic constant (8.99 x 10^9 Nm^2/C^2), Q is the charge (-19.0 μC), and r is the radius of the sphere (10.0 cm).
The electric field just outside the paint layer is approximately 3.42 x 10^5 N/C.
Part C: To find the electric field 7.00 cm outside the surface of the paint layer, we need to recalculate the electric field with a new radius (10.0 cm + 7.00 cm = 17.0 cm). The electric field 7.00 cm outside the surface is approximately 1.07 x 10^5 N/C.
For part A, the electric field inside a conductor is zero because the charges will distribute themselves on the surface, and no electric field exists within the conductor.
For parts B and C, the formula E = kQ/r^2 is used to calculate the electric field at a distance r from a point charge Q. In these cases, we consider the charge to be uniformly distributed on the sphere's surface.
Summary:
The electric field just inside the paint layer is 0 N/C, just outside the paint layer is approximately 3.42 x 10^5 N/C, and 7.00 cm outside the surface of the paint layer is approximately 1.07 x 10^5 N/C.
Learn more about electric field click here:
https://brainly.com/question/14372859
#SPJ11
6.4 x 10^9 at a certain temperature, the equilibrium constant for the following reaction is : use this information to complete the following table. suppose a 37. l reaction vessel is filled with 2.0 mol of no2. what can you say about the composition of the mixture in the vessel at equilibrium? there will be very little no3 and no. there will be very little no2. neither of the above is true. what is the equilibrium constant for the following reaction? round your answer to significant digits. (g) (g)(g) what is the equilibrium constant for the following reaction? round your answer to significant digits. (g)(g) (g)
If a 37 L reaction vessel is filled with 2.0 mol of NO2, then at equilibrium, there will be very little NO3 and NO, and the composition of the mixture will mainly consist of NO2. The equilibrium constant for the given reaction at a certain temperature is 6.4 x 10^9.
The equilibrium constant (Kc) for a chemical reaction indicates the extent to which the reaction proceeds towards the products or the reactants at equilibrium. In this case, the equilibrium constant for the given reaction at a certain temperature is 6.4 x 10^9.
The reaction involves the conversion of nitrogen dioxide (NO2) into nitrogen oxide (NO) and nitrogen trioxide (NO3).
The equilibrium constant can be calculated using the concentrations of the reactants and products at equilibrium, which is not given in the question.
For more such questions on temperature, click on:
https://brainly.com/question/26866637
#SPJ11
what happens to the number of protons in the nucleus as you move from one element to the next across a period?
Protons in the nucleus increase by one as you move across a period, while electrons increase by one, but the outermost energy level remains the same.
How does the number of protons in the nucleus change as you move across a period to the next element?As you move from one element to the next across a period, the number of protons in the nucleus increases by one. This is because each element in a period has one more proton in its nucleus than the element before it.
The atomic number of an element represents the number of protons in its nucleus. The number of protons determines the element's identity and its position on the periodic table. Each element has a unique number of protons in its nucleus, which is why they are different from each other.
As you move from left to right across a period, the increase in the number of protons is accompanied by an increase in the effective nuclear charge. This is because the electrons in the outermost energy level of the atom are held more tightly by the nucleus, resulting in a smaller atomic radius. The increase in the effective nuclear charge also leads to a higher ionization energy and electronegativity across the period.
Learn more about ionization
brainly.com/question/28385102
#SPJ11
According to the well-known equation, energy equals mass times the speed of light squared,
a. mass and energy travel at the speed of light squared
b. energy is actually mass traveling at the speed of light squared
c. mass and energy travel at twice the speed of light
d. mass and energy are related
e. none of these
According to the well-known equation, energy equals mass times the speed of light squared, "mass and energy are related". So, option (d) is correct.
The link between mass and energy is described by the equation E=mc², where E stands for energy, m for mass, and c for the speed of light. It demonstrates how energy and mass are equivalent, and how a small amount of mass may be transformed into a significant amount of energy.
One of the most well-known physics equations, E=mc2, has significant ramifications for how we perceive the cosmos. It demonstrates how mass and energy may be transformed back and forth through procedures like nuclear reactions. Mass and energy are two manifestations of the same thing.
Learn more about Energy :
https://brainly.com/question/30087556
According to the well-known equation, energy equals mass times the speed of light squared, mass and energy are related. The correct answer is (d) mass and energy are related.
According to Einstein's famous equation E=mc^2, mass and energy are related.
The equation states that energy (E) is equal to mass (m) multiplied by the speed of light (c) squared. This means that mass and energy are two forms of the same thing, and they can be converted into each other.
The equation does not imply that mass and energy travel at the speed of light squared (a), or that energy is actually mass traveling at the speed of light squared (b). Also, mass and energy do not travel at twice the speed of light (c).
Therefore, the correct answer is (d) mass and energy are related.
For more such questions on light , Visit:
https://brainly.com/question/104425
#SPJ11
an electronic signature provides ________ and ________. group of answer choices handshaking; message integrity keying; encryption authentication; handshaking authentication; message integrity
the maximum allowable potential difference across a 230 mH inductor is 390 V. You need to raise the current through the inductor from 1.4 A to 3.5 A PartA What is the minimum time you should allow for changing the current? Express your answer to two significant figures and include the appropriate units ain-Value
The minimum time needed to change the current through the inductor is 1.23 ms.
To find the minimum time needed to change the current through the inductor, we'll use the formula for the inductor's voltage, V = L * (ΔI/Δt), where L is the inductance, ΔI is the change in current, and Δt is the time.
Given values:
L = 230 mH = 0.230 H
V = 390 V
Initial current, I1 = 1.4 A
Final current, I2 = 3.5 A
First, find the change in current:
ΔI = I2 - I1 = 3.5 A - 1.4 A = 2.1 A
Next, rearrange the formula to solve for time:
Δt = L * (ΔI/V)
Finally, plug in the given values:
Δt = 0.230 H * (2.1 A / 390 V)
Δt ≈ 0.00123 H
To convert to milliseconds, multiply by 1000:
Δt ≈ 1.23 ms
The minimum time you should allow for changing the current is approximately 1.23 milliseconds.
More on current: https://brainly.com/question/25483227
#SPJ11
HClO is a weak acid (Ka=4.0×10^−8) and so the salt NaClO acts as a weak base. What is the pH of a solution that is 0.088 M in NaClO at 25 degrees Celsius?
The pH of a solution that is 0.088 M in NaClO at 25°C is approximately 10.17.
Kb = Kw/Ka = 1.0 × 10^-14/4.0 × [tex]10^{-8[/tex] = 2.5 × [tex]10^{-7[/tex]
Now, we can write the expression for the base dissociation constant Kb:
Kb = [OH-][ClO-]/[NaClO]
Substituting these values into the Kb expression and solving for x, we get:
2.5 × [tex]10^{-7[/tex] = x²/0.088
x = 1.49 × [tex]10^{-4[/tex] M
Since the concentration of OH- ions is 1.49 × [tex]10^{-4[/tex] M, the concentration of H3O+ ions is given by:
Kw = [[tex]H_3O[/tex]+][OH-] = 1.0 × [tex]10^{-14[/tex]
[[tex]H_3O[/tex]+] = Kw/[OH-] = 1.0 × [tex]10^{-14[/tex]/1.49 × [tex]10^{-4[/tex] = 6.71 × [tex]10^{-11[/tex] M
Finally, we can calculate the pH of the solution using the formula:
pH = -log[[tex]H_3O[/tex]+] = -log(6.71 × [tex]10^{-11[/tex]) = 10.17
pH is a measure of the acidity or basicity of a solution, with pH 7 being neutral, below 7 being acidic and above 7 being basic. The term pH stands for "potential of hydrogen" and refers to the concentration of hydrogen ions (H+) in the solution.
The pH scale ranges from 0 to 14, with each unit representing a tenfold difference in the concentration of hydrogen ions. For example, a solution with a pH of 4 is ten times more acidic than a solution with a pH of 5. Acids are substances that release hydrogen ions in solution, while bases are substances that accept hydrogen ions. The pH of a solution can be measured using a pH meter or pH paper, which changes color depending on the acidity or basicity of the solution.
To learn more about pH visit here:
brainly.com/question/491373
#SPJ4
a 1.8 kg , 20-cm -diameter turntable rotates at 60 rpm on frictionless bearings. two 490 g blocks fall from above, hit the turntable simultaneously at opposite ends of a diameter, and stick. what is the turntable's angular velocity, in rpm , just after this event?
Therefore, the turntable's angular velocity just after the blocks hit it is 35.9 rpm.
We can use the conservation of angular momentum to solve this problem. Before the blocks fall on the turntable, the angular momentum of the turntable is:
L1 = I1ω1
where I1 is the moment of inertia of the turntable, and ω1 is the initial angular velocity of the turntable.
After the blocks fall on the turntable, the turntable and the blocks will rotate together as a single system. The moment of inertia of the system will be:
I2 = I1 + 2mr²
where m is the mass of each block, and r is the radius of the turntable (10 cm).
The angular velocity of the system just after the blocks fall on the turntable is:
ω2 = L2/I2
where L2 is the new angular momentum of the system.
Since the blocks hit the turntable simultaneously at opposite ends of a diameter, the angular momentum of each block is equal in magnitude and opposite in direction, and cancels out. Therefore, the new angular momentum of the system is:
L2 = I2ω2
= I1ω1
Using the fact that the turntable rotates at 60 rpm (i.e., ω1 = 2π(60/60) rad/s = π rad/s), we can solve for ω2:
ω2 = (I1/I2)ω1
= (I1/(I1+2mr²))ω1
Plugging in the given values, we get:
I1 = (1/2)MR²
= (1/2)(1.8 kg)(0.1 m)²
= 0.009 kg·m²
I2 = I1 + 2mr²
= 0.009 + 2(0.49 kg)(0.1 m)²
= 0.015 kg·m²
ω2 = (0.009/(0.009+2(0.49 kg)(0.1 m)²))π
= 35.9 rpm
To know more about angular velocity,
https://brainly.com/question/29557272
#SPJ11
photometer with a linear response to radiation gave a potential reading of 678.1 mv with a blank in the light path and 160.3 mv when the blank was replaced by an absorbing solution. calculate:
When a blank was in the light path, a photometer with a linear response to radiation read 678.1 mV and 160.3 mV, respectively, when the blank was replaced with an absorbing solution, or 23.64%.
Using the given data, we can use the following formula to get the percentage of transmitted radiation: % Transmittance = (I / I₀) × 100
When ligand-gated channels open, the membrane potential of a neuron can swiftly change. There are two alternative modifications that might take place: depolarization, which is a movement towards a more positive potential, or hyperpolarization, which is a shift towards a more negative potential. The direction of the change depends on the ion that the channel allows to pass through.
where I0 denotes the radiation's starting intensity (when the blank is used), and I denotes the radiation's intensity after passing through the absorbing solution.
Given the information:
I = 160.3 mV (with the absorbing solution) and I₀ = 678.1 mV (with the blank).
Now, we can determine the transmittance percentage:
(160.3 mV/678.1 mV) / 100 x 23.64% = % Transmittance
This indicates that the absorbing solution allows for the transmission of around 23.64% of the radiation.
Learn more about hyperpolarization here
https://brainly.com/question/30747822
#SPJ11
The Complete question is
photometer with a linear response to radiation gave a potential reading of 678.1 mv with a blank in the light path and 160.3 mv when the blank was replaced by an absorbing solution. calculate the transmission of absorbing solution?
Arrange the events that occur at the end of a solar‑mass star's life in chronological order, starting with when the star depletes all of the hydrogen in its core. - helium fusion begins in core - white dwarf surrounded by planetary nebula - final stages of mass loss via stellar winds - planetary nebula dissipates away - helium fusion in shell around carbon core
So, the chronological order for the following set of solar system is:
Hydrogen in core depleted
Helium fusion begins in core
Helium fusion in shell around carbon core
Final stages of mass loss via stellar winds
White dwarf surrounded by planetary nebula
Planetary nebula dissipates away
Yes, the correct chronological order of these events for a typical low-mass star is:
Hydrogen in the core is depleted, causing the core to contract and heat up.
Helium fusion begins in the core, producing carbon and oxygen.
The outer envelope of the star expands and cools, becoming a red giant.
Helium fusion occurs in a shell around the carbon-oxygen core.
The star loses mass via stellar winds during the red giant phase.
The core eventually becomes hot enough to fuse carbon and oxygen, producing heavier elements.
The star sheds its outer envelope, exposing the hot core, which becomes a white dwarf.
The white dwarf is surrounded by a planetary nebula, a shell of gas and dust expelled during the final stages of the star's life.
The planetary nebula dissipates over time, leaving behind only the white dwarf.
To know more about solar system,
https://brainly.com/question/12075871
#SPJ11