Answer:
molecular recognition based on structural complementarity
Explanation:
Enzymes work on the basis of a lock and key model. The substrates on which enzymes act are specifically tailored to suit the shape of the enzyme.
As such, the enzyme just fits into the substrate in the same way as the right key fits into a lock.
Hence, molecular recognition based on structural complementarity is the basis for the specificity of enzyme activity.
You have 56.8 mL of a gas collected at 664 mmHg and 135 K. What volume will it occupy at 632 mmHg and 196 K? *
Answer:
86.6 mL
Explanation:
From the question given above, the following data were obtained:
Initial volume (V₁) = 56.8 mL
Initial pressure (P₁) = 664 mmHg
Initial temperature (T₁) = 135 K
Final pressure (P₂) = 632 mmHg
Final temperature (T₂) = 196 K
Final volume (V₂) =?
The final volume of the gas can be obtained as follow:
P₁V₁/T₁ = P₂V₂/T₂
664 × 56.8 / 135 = 632 × V₂ / 196
Cross multiply
135 × 632 × V₂ = 664 × 56.8 × 196
85320 × V₂ = 7392179.2
Divide both side by 85320
V₂ = 7392179.2 / 85320
V₂ = 86.6 mL
Therefore, the final volume of the gas is 86.6 mL
What particle has no electrical charge and is found in the nucleus?
O Proton
O Neutron
O Electron
Answer:
electron is the right answer
Answer:
[tex]\huge\mathfrak\red{Answer...} \\ \\ \huge\mathfrak\purple{neutron} \\ \\ \huge\mathfrak\pink{hope \: it \: helps..}[/tex]
plz draw a periodic table with all its information
Answer:
Explanation:
Hope this helps u!!
Answer:
plz following me ❤❤...........,...,.,.
Which type of reaction is indicated by a positive AH?
o an endothermic reaction
O a reversible reaction
O a spontaneous reaction
O an exothermic reaction
Answer:
An endothermic reaction
Explanation:
A positive sign indicates that energy is absorbed. Hence it is an endothermic reaction.
A reversible reaction is indicated by a double arrow on the chemical equation.
A spontaneous is indicated by negative Gibbs Free Energy (G) value.
An exothermic reaction is indicated by a negative enthalpy change
Select the correct answer.
How does substituting a hydrogen atom with a halogen in a hydrocarbon affect the resulting compound?
A.
All the single bonds in the original molecule change to double bonds.
B.
The boiling point of the new compound increases.
C.
The bonds between the carbon atoms in the molecule become weaker.
D.
The resulting compound is called a saturated hydrocarbon.
E.
The substitution allows each carbon atom to accept more than four valence electrons.
Answer:
E. The substitution allows each carbon atom to accept more than four valence electrons.
Explanation:
Halogens (except for fluorine) have seven valence electrons, which gives them the flexibility to participate in more than four covalent bonds. Hydrogen only has one valence electron, so it tends to form only four covalent bonds. In a substitution reaction, each halogen provides the carbon atom with additional electrons, allowing it to accept more than the usual four.
Answer:
C. The bonds between the carbon atoms in the molecule become weaker.
Explanation:
7. Buffalo were moved from Yellowstone National Park because
they carried a serious disease
they had killed other animals
they were no longer protected there
the herd had grown too large
Answer:
they had killed other animals
I believe your answer is carried a serious disease.
Explanation: Buffalo are known to carry a disease called brucellosis, which can spread to livestock a kill other animals/
How does the volume change if 50mL of a gas material is cooled from 30\deg C to 5\deg C ?
50mL
46mL
100mL
56mL
The final volume can be determined using Charles's law. The volume of gas at 5 degree Celsius will be 8.3 ml.
What is Charles's law of gases ?According to Charles's law, at constant pressure, the volume of a gas is directly proportional to the temperature.
Hence, V/T = constant.
Let, V1 and T1 be the initial volume and temperature and V2, T2 be the final quantities.
then, V1/T1 = V2/T2.
V2 = V1 T2/ T1
Given, V1 = 50 ml
T1 = 30 °C
T2 = 5 °C
Then, V2 = 50 ml × 5 °C /30 °C = 8.3 ml
Therefore, the volume of the gas reduces to 8.3 ml.
Find more on Charles's law:
https://brainly.com/question/16927784
#SPJ1
Convert 100mL to L. Show your work to receive full credit.
Answer:
100 ml = 0.1 L
I divided 100 by 1000 because 1000ml = 1L
A 250. cm3 sample of neon is collected at standard temperature and pressure. Assuming the volume remains constant, what would be the pressure of the neon at 44.0°C?
a) 118 b)87.2 c) 0.00 d)290
Answer:
The answer is 118 kPa.
Explanation:
The_____gene shows up even when inherited only from one parent.
Answer:
The Alleles gene shows up even when inherited only from one parent
Explanation:
The two alleles in a gene pair are inherited, one from each parent. Alleles interact with each other in different ways. These are called inheritance patterns.
i hope this helped
The molar mass of CCl4 is 153. 81 g/mol How many grams of CCl4 are needed to have 5. 000 mol?
The molar mass of CCl4 is 153. 81 g/mol. '769.0 g' of CCl4 are needed to have 5.000 mol.
What is molar mass?
Molar mass is the mass of one mole of a substance. It is usually expressed in grams per mole (g/mol). The molar mass of a substance is calculated by taking the sum of the atomic weights of all of the atoms in the molecule multiplied by the Avogadro constant (6.022x10^23).
To find the number of grams of CCl4 needed to have 5.000 mol, use the formula:
Mass (grams) = Molar mass (g/mol) x Number of moles
Mass (grams) = 153.81 g/mol x 5.000 mol
Mass (grams) = 769.0 g.
'769.0 g' of CCl4 are needed to have 5.000 mol.
To know more about molar mass,
https://brainly.com/question/837939
#SPJ4
Predict the molecular geometries of the following species, respectively: IF3, TeF4, XeF51+.
a. T-shaped, see-saw, square pyramidal
b. trigonal planar, tetrahedral, square pyramidal
c. trigonal pyramidal, tetrahedral, see-saw
d. trigonal planar, see-saw, square planar
e. trigonal pyramidal, square planar, linear
a. T-shaped, see-saw, square pyramidal.IF3: The Lewis structure of IF3 consists of a central I atom, which is surrounded by three F atoms.
IF3: The Lewis structure of IF3 consists of a central I atom, which is surrounded by three F atoms. The three F atoms are arranged in a symmetric, T-shaped geometry.
TeF4: The Lewis structure of TeF4 consists of a central Te atom, which is surrounded by four F atoms. The four F atoms are arranged in a symmetric, trigonal planar geometry.
XeF5+: The Lewis structure of XeF5+ consists of a central Xe atom, which is surrounded by five F atoms. The five F atoms are arranged in a symmetric, square pyramidal geometry.
a. T-shaped, see-saw, square pyramidal.
learn more about lewis here
https://brainly.com/question/4144781
#SPJ4
How many moles are in 1gm?
The mole is the fundamental unit of substance quantity in the SI. 0.041143797572516 moles make up 1 gram of magnesium. The grams to moles formula Use the grams to moles formula to calculate the number of moles, n, of a substance with a given mass, m, (in grams) accurately. n = m / M.
Depending on the substance, yes. As a reminder, a mole is equal to 6.02 1023 atoms and is used to measure quantities. Therefore, it stands to reason that lead and hydrogen would weigh differently. Less moles would be required because it would take a lot fewer lead atoms to make up 1 gram. However, one hydrogen atom has far less mass than one lead atom, therefore more atoms (and moles) would be required to create one gram.
Learn more about moles here:
https://brainly.com/question/14592151
#SPJ4
Write the chemical symbols for three different atoms or atomic anions with 10 electrons
Answer:
i) Neon (Ne)
ii) Fluoride Ion (F⁻¹)
iii) Oxide Ion (O⁻²)
Explanation:
Ions are those charged species which are either positively charged (by loosing electrons) called as cations or negatively charged (by gaining electrons) called as anions.
In given examples, Neon is a neutral atom which has an atomic number 10. It contains 10 electrons in its neutral state with the electronic configuration 1s², 2s², 2p⁶.
Fluorine atom has an atomic number of 9. Therefore, it contains 9 electrons in its neutral state with an electronic configuration of 1s², 2s², 2p⁵. When Fluorine atom gains one electron it gets 10 electrons with electronic configuration of 1s², 2s², 2p⁶.
Oxygen atom has an atomic number of 8. Therefore, it contains 8 electrons in its neutral state with an electronic configuration of 1s², 2s², 2p⁴. When Oxygen atom gains two electron it gets 10 electrons with electronic configuration of 1s², 2s², 2p⁶ forming an Oxide Ion.
Glucose gives off 2808 kJ/mol when burned, how much energy can be
produced from 935 grams? *
O 14602 kJ
O 15.6 kJ
O 0.3330 kJ
O 3.00 kJ
You start with two reactants. One reactant has a mass of 13.6 grams and the other reactant has a mass of 72.9 grams. 22 grams of gas are released during the reaction. What is the total mass of all of the products formed in this reaction?
Answer:
64.5g
Explanation:
First you add the mass of reactant 1 and reactant 2, then you simply subtract the amount of gas released from your answer, and that would be the total mass of ALL the products formed.
My work:
13.6g + 72.9 = 86.5g
86.5g - 22g = 64.5g
Draw the structure of maleic acid ((Z)-but-2-enedioic acid).
The structure of maleic acid is H2C=CH2 with a double bond between two hydrogen atoms and a double bond between the second and third carbon atoms in the three carbon chain.
H3C-C=C-COOH
\ /
H2C=CH2
1. Draw a three carbon chain with a double bond between the second and third carbon atoms
H3C-C=C-COOH
2. Add two hydrogen atoms to the second carbon atom
H3C-C=CH2-COOH
3. Draw a double bond between the two hydrogen atoms
H2C=CH2-COOH
H2C=CH2
\ /
H3C-C=C-COOH
The structure of maleic acid is H2C=CH2 with a double bond between two hydrogen atoms and a double bond between the second and third carbon atoms in the three carbon chain.
learn more about maleic acid here
https://brainly.com/question/14670113
#SPJ4
Which of the compounds below would contain polar covalent bonds? F2, N2O, KCl A. KCl only B. N2O only C. F2 only D. Both F2 and N2O
The compound below that would contain polar covalent bonds is : B. N2O only .
What do you understand by polar covalent bonds?Polar covalent bond is a covalent bond in which electron density is unevenly shared between the two bonded atoms, due to the difference in electronegativity or due to the inductive effects.
An example of a polar bond is the bond in water between hydrogen and oxygen and bond is classified as polar bond because it has a large electronegativity difference of 1.4. Electrons in hydrogen are more attracted to the electrons in oxygen as oxygen is more electronegative.
To know more about polar covalent bond, refer
https://brainly.com/question/3978603
#SPJ4
Classify each amino acid according to whether its side chain is predominantly protonated or deprotonated at a pH of 7. 40. The p K a values of the Asp, His, and Lys side chains are 3. 65 , 6. 00 , and 10. 53 , respectively
His and Lys are deprotonated but Asp will be protonated.
What is amino acids?Organic substances that possess both amino and carboxylic acid functional groups are known as amino acids. Although hundreds of amino acids occur in nature, the alpha-amino acids that constitute proteins are by far the most significant. The genetic coding contains only 22 alpha amino acids. Amino acids are chemicals that make proteins when they combine. The building blocks of life are amino acids and proteins. Amino acids are left over after proteins are digested or broken down. To support the body, the human body utilizes amino acids to build proteins: Food should be broken down.
Here,
As the pH is given as 7.4 and pK of His is given as 6.00. There will occur a positive charge on His when it's pH < pK therefore, it is neutral at the given pH.
As the pK value of Lys is 10.53 that is greater than the pH of 7.40. Therefore, charge on Lys is positive.
As the pK value of Asp is 3.65 which is less than the pH value of 7.40. Hence, Asp has a negative charge.
Therefore, we can conclude that His and Lys are deprotonated but Asp will be protonated.
To know more about amino acid,
https://brainly.com/question/16832236
#SPJ4
Consider the orbital diagram
shown. Which electron rule is
broken in the diagram?
1
1s 2s
2p
A. Aufbau Principle
B. Hund's Rule
C. Pauli Exclusion Principle
The electron rule is broken in the diagram is: (c) Pauli Exclusion Principle.
What is electron?An electron is a subatomic particle with a negative electric charge. It is found in atoms, and is the main component of electricity. Electrons are incredibly small, measuring only a fraction of a nanometer, and they are around 2000 times lighter than the smallest atom. Electrons are governed by the laws of quantum mechanics and they are move around the nucleus of an atom in discrete orbits. Electrons are responsible for chemical bonding between atoms, and they are essential for the formation of molecules.
To learn more about electron
https://brainly.com/question/25674345
#SPJ1
SnO2 (s) + 2 H2 (g) → Sn (s) + 2 H2O (l)
What mass of water is produced when 57.6g of SnO2 are consumed in the reaction above?
Answer:
SnO2+2H2 - Sn +2H2O
50g of tin plus 32g of oxygen-36g of H2O
82g- 36g
57.6g- x
cross multiply
82xg= 2073.6g
xg = 2073.6/82
Xg= 25.28g
Therefore the mass of water consumed in the reaction is 25.28g
56. A rigid cylinder with a movable piston contains a 2.0-liter sample of neon gas at STP. What is the
volume of this sample when its temperature is increased to 30.°C while its pressure is decreased to
90. kilopascals?
A) 2.5 L
B) 2.0L
C) 1.6L
D) 0.22 L
V2 = 2.499 2.5 L is the sample's volume when its temperature is raised to 30 °C and its pressure is lowered to 90 kilopascals.
What does the word "volume" actually mean?
The volume of an item is the space occupied inside its three-dimensional boundaries. A other word for it is the object's capacity.
What is the volume of the liquid?
The volume of liquid measured in a vessel's standard units is known as the liquid measurement. Infant milk bottle with milliliter measurement indications and juice bottle with a 1 liter capacity are two examples of vessels that have a "capacity" or "volume."
As,
Gas constant R is constant, so, Ideal gas equation can be written as,
P₁ V₁ / T₁ = P₂ V₂ / T₂
Solving for V₂,
V₂ = (P₁ × V₁ × T₂) ÷ (T₁ × P₂)
Putting Values,
V₂ = (101.325 KPa × 2 L × 303 K) ÷ (273 K × 90 KPa)
V₂ = 61402.95 ÷ 24570
V₂ = 2.499 ≈ 2.5 L
To know more about volume visit:
https://brainly.com/question/28058531
#SPJ1
What particle has a negative electrical charge and is found in clouds
outside the nucleus? *
O Proton
O Neutron
O Electron
electrons
Revolving around the nucleus at a distance is a cloud of particles called electrons. Each electron has a negative charge.
Answer:
Electron
Explanation:
Because electrons are negatively charge particles
Please help I will give brainliest.
Answer:
the second one looks like it so I picked the second one
Look at the general chemical equation below. A B C Which situation best describes the effect of a limiting reactant
The situation that best describes the effect of a limiting reactant is that when there is not enough A reactant to react with whole B.
The limiting reactant, also known as the limiting reagent, is the reactant that is used first during a chemical reaction, hence restricting the amount of product that can be produced. The limiting reactant can be identified in a variety of methods ,but they all require employing mole ratios from the balanced chemical equation.
The theoretical yield is the maximum quantity of product possible given the limiting reactant. The quantity of product actually procured, or actual yield, is usually always less than the theoretical yield. The percentage yield used to describe the actual yield indicates what portion of the theoretical yield was attained.
In the equation there is only one situation which describes the effect of limiting reagent when there is not enough of A to react with whole B.
Learn more about limiting reactant
brainly.com/question/2948214
#SPJ4
you have a sample contianing 4.92x10^23 molecules of nitrogen dioxide. how many grams of nitrodgen dioxide do you have
As a result, 6.022 x 10 23 molecules of water weigh 18.02 g. A mole of sodium chloride (6.02 x 1023 formulas) weighs 58.44 g.
A substance's mole is equivalent to 6.022 x 1023 of that material (such as atoms, molecules, or ions). One mole, or 6.022 x 1023 molecules, is equal to one gram's worth of any given substance's molecular mass. Thus, a mole of oxygen (O2) weighs 32 kilos and has a molecular mass of 6.022 1023.
12 grams of pure carbon-12 weigh exactly one mole, or 6.022 x 1023 atoms, making one mole equivalent to 12 grams of pure carbon-12. • Avogadro's Number refers to the quantity of particles contained in one mole (6.0221421x1023).
Learn more about molecular here-
https://brainly.com/question/14614762
#SPJ4
which of the following is a testable hypotheses?
O A. if I brush my teeth, I will get fewer cavities than if i don’t brush my teeth.
O B. it’s wrong not to brush your teeth before you have an important conversation with someone.
O C. Green toothpaste taste better than blue toothpaste or red toothpaste.
O D. smart, careful, healthy people always brush their teeth.
Answer:
A
Explanation:
because its the only one that can be tested
What is the mass % of carbon in dimethylsulfoxide (C2H6SO) rounded to three significant figures? A) 7.74 B) 78.1 C) 25.4 D) 30.7 E) 28.6
The mass % of carbon in dimethyl sulfoxide (C2H6SO) rounded to three significant figure is calculated as 30.718%.
What is mass percentage?Mass percent of a solution is defined as the ratio of the mass of solute that is present in solution, relative to the mass of solution as a whole. To calculate mass percent of an element in a compound, we divide mass of the element in 1 mole of the compound by the molar mass and then multiply the result by 100.
As we know molar mass of carbon is 12 g/mol and molar mass of dimethyl sulfoxide is 78.13 g/mol
Mass % of carbon (C2) in dimethyl sulfoxide (C2H6SO) = 2* (12/78.13) * 100
= 30.718%
To know more about mass percent, refer
https://brainly.com/question/26150306
#SPJ4
Explain the role of photosynthesis in the carbon cycle
Answer:
During photosynthesis, plants absorb carbon dioxide and sunlight to create fuel, glucose and other sugars for building plant structures. This process forms the foundation of the fast carbon cycle.In all four processes, the carbon dioxide released in the reaction usually ends up in the atmosphere.
Answer:
During photosynthesis, plants also absorb carbon dioxide and sunlight to create fuel, glucose, and other sugars for building plant structures. This process forms the foundation of the fast carbon cycle.
Explanation:
hope this helps
pls mark me brainliest
Steel is an alloy containing Fe atoms and C atoms. Which of the following diagrams best represents the particle-level structure of steel ?
the diagram that best represents the particle-level structure of steel as alloy is option (b).
Alloy, often known as an alloy, is a metallic material made up of two or more elements. Even though carbon, a nonmetal, is a crucial component of steel, the constituents of alloys are typically themselves metals.
Typically, melting the mixture of materials produces alloys. Early civilizations recognized the usefulness of alloys; brass (copper and zinc) and bronze (copper and tin) were particularly significant.
Steel is an alloy of iron and carbon. carbon range is upto 2 percent in the mixture.
In steel iron atoms are larger than carbon.
Learn more about alloy
brainly.com/question/3718729
#SPJ4