Amna needs to make a total of 95 deliveries this week. So far she has completed 57 of them. What percentage of her total deliveries has Amna completed

As a result, the missing angles' measurements are as follows: 3.75 parallel lines degree angle; 105 degrees at angle 4.; 75 degrees at angle 5.; 105 degrees at angle 6.

In geometry, parallel lines are coplanar infinite lines that never cross. Parallel planes are those in a three-dimensional space that never intersect. Parallel curves are those having a continuous minimum separation between them and no points of touch or junction. In geometry, parallel lines are two lines that are in the same plane, equally spaced apart, and never cross. Both vertical and horizontal can be used. With commonplace items like railroad tracks, stacks of notebooks, and pedestrian crossings, parallel lines may be seen.  

Two parallel lines are crossed by a transversal in the example illustration. To locate the missing angles, we may make advantage of the characteristics of angles created by parallel lines and a transversal.

Angle 3: If angles 1 and 3 are equivalent angles and angle 1 is 75 degrees,

Angle 4: As angles 2 and 4 are equivalent angles and angle 2 is 105 degrees,

If angles 1 and 5 are alternative internal angles, and angle 1 is 75 degrees,

Angle 6: If angles 2 and 6 are alternative internal angles, and angle 2 is 105 degrees,

As a result, the missing angles' measurements are as follows:

3.75 degree angle

105 degrees at angle 4.

75 degrees at angle 5.

105 degrees at angle 6.

To know more about parallel lines visit:

https://brainly.com/question/16701300

#SPJ1

Answer:900 yards

Step-by-step explanation:

Unit rate would be 600/2 meaning 300 yards would be done in a third of an hour. Multiply that be 3 (3 thirds is 1) and 300x3=900
pretty straightforward :)

The equation of the line through (3,5) and parallel to the line whose equation is ( y=-6x+4 ) is y = -6x + 23.

To find the equation of a line with the given properties, we need to use the concept of parallel lines and the point-slope form of a linear equation.

Parallel lines have the same slope, so the slope of the new line will be the same as the slope of the given line ( y=-6x+4 ), which is -6.

Next, we can use the point-slope form of a linear equation, which is (y - y1) = m(x - x1), where m is the slope and (x1, y1) is a point on the line. Plugging in the given point (3, 5) and the slope -6, we get:

y - 5 = -6(x - 3)

Simplifying the equation, we get:

y - 5 = -6x + 18

y = -6x + 23

Finally, we can write the equation in slope-intercept form, which is y = mx + b, where m is the slope and b is the y-intercept. The equation of the new line is y = -6x + 23.

Therefore, the equation of the line through (3,5) and parallel to the line whose equation is ( y=-6x+4 ) is y = -6x + 23.

Learn about Parallel line

brainly.com/question/16701300

#SPJ11

Answer:

Answer is C

Step-by-step explanation:

using long divison:

Answer:

$109+$281=x when x=391

so that means a laptop equals $391 dollars

As the variance/mean ratio is significantly greater than 1, the population is found to be a clumped distribution.

A clumped distribution, also known as an aggregated distribution, is a pattern of dispersion or arrangement of individuals within a population where they are found in groups or clusters. This means that individuals within a population are more likely to be found in certain areas, while other areas may have few or no individuals.

From the table in the attached image, it can be seen that

the variance= sum of (x -  0.6)^2/ sum of frequency

= 362.88/288

= 1.26

Variance/mean = 1.26/0.6 = 2.1 which is greater than 1

Read more about clumped distributions here:

https://brainly.com/question/14874845

#SPJ1

Based on the given information, the sample space for the event can be represented using a tree diagram, where the first level consists of the three pants (black, blue, and tan) and the second level consists of the five shirts (white, black, green, blue, and red). Each branch represents a possible combination of a pair of pants and a shirt.

To find the total number of outcomes in the sample space, we can simply multiply the number of options for pants (3) by the number of options for shirts (5), giving us a total of 15 possible outcomes.

For Natalie selecting a pair of pants and shirt that are the same color, the favourable outcomes would be the combinations where the pants and shirt are either both black or both blue. These can be listed as:

Black pants and black shirt

Blue pants and blue shirt

For Natalie selecting a black shirt, the favourable outcomes would be the combinations where the shirt is black. These can be listed as:

Black pants and black shirt

Blue pants and black shirt

Tan pants and black shirt

For Natalie selecting a blue article of clothing, the favourable outcomes would be the combinations where either the pants or the shirt (or both) are blue. These can be listed as:

Black pants and blue shirt

Blue pants and white shirt

Blue pants and black shirt

Blue pants and green shirt

Blue pants and blue shirt

Tan pants and blue shirt

Answer:

Air

Step-by-step explanation:

it's asking you to look at the chart and find which substance is densest by comparing it to how fast sound can move through it (the speed of sound in the substance). In my opinion copper is not the densest material because sound moves through it the fastest; which means the particles in copper are not as densely held together. Air however, shows that sound can only travel 330 meters per second which is incredibly slow compared to the other listed materials, so by that logic it must be the densest.  

603 white-tailed deer are expected to live in the rectangular area. To find the total number of white-tailed deer in the rectangular area, we need to find the area of the rectangle first. The area of a rectangle is given by the formula:

Area = length × width

In this case, the length is 2.25 miles and the width is 6.7 miles. So, the area of the rectangle is:

Area = 2.25 × 6.7

Area = 15.075 square miles

According to the given information, there are about 40 white-tailed deer per square mile in each of 35 Texas counties. We need to find how many white-tailed deer are expected to live in a rectangular area that measures 2.25 miles by 6.7 miles.

Now, we can find the total number of white-tailed deer in the rectangular area by multiplying the area by the number of deer per square mile:

Total number of deer = 15.075 × 40

Total number of deer = 603

Therefore, there are expected to be 603 white-tailed deer in the rectangular area.

Know more about rectangular area here:

https://brainly.com/question/16309520

#SPJ11

Answer:

B. y=7x

Step-by-step explanation:

A direct proportion is where the ratio is constant. The ratio will stay the same. Therefore, y = 7x, this ratio will stay constant making it a direct proportion.

Hope this helps : )

The two binomials that Camden must have multiplied and got the product of 49x^(2)-100 are (7x+10) and (7x-10).

To find the two binomials that Camden must have multiplied to get the product of 49x^(2)-100, we can use the process of factoring. Factoring is the process of breaking down a larger expression into two or more smaller expressions that can be multiplied together to get the original expression.

One way to factor the expression 49x^(2)-100 is to look for two binomials that have a difference of squares. A difference of squares is an expression of the form a^(2)-b^(2), which can be factored into (a+b)(a-b).

In this case, we can see that 49x^(2) is a perfect square, as it is equal to (7x)^(2), and 100 is also a perfect square, as it is equal to 10^(2). Therefore, we can factor the expression 49x^(2)-100 into (7x+10)(7x-10).

So, the two binomials that Camden must have multiplied are (7x+10) and (7x-10).

To know more about binomial refer here:

https://brainly.com/question#

#SPJ11

Step-by-step explanation:

When 508,000,000 is written in scientific notation, it will be represented as:

5.08 x 10^8

Therefore, the value of the exponent is 8.

Answer:

Step-by-step explanation:

The solution of inequality is n < - 9

Answer:

12ft: 1sec

Step-by-step explanation:

180ft : 15sec

180÷15=12

15÷15=1

soooo it's

12ft : 1sec in the lowest term

(i) The area of the path is 120x - 4x² square meters.

(ii) The cost of planting grass in the remaining portion of the garden at the rate of Rs 40 per m² is (900 - 120x + 4x²) × 40

To find the area of the path and the remaining portion of the garden, we need to first find the dimensions of the inner square after the path has been constructed.

Let the width of the path be "x" meters. Then the dimensions of the inner square garden will be (30-2x) meters on each side.

(i) The area of the path can be found by subtracting the area of the inner square from the area of the outer square.

Area of outer square = 30 × 30 = 900 sq.m.

Area of inner square = (30-2x) × (30-2x) = 900 - 120x + 4x² sq.m.

Area of path = Area of outer square - Area of inner square

= 120x - 4x² sq.m.

(ii) The remaining portion of the garden is the area of the inner square.

Area of remaining portion = (30-2x) × (30-2x) sq.m.

= 900 - 120x + 4x² sq.m.

The cost of planting grass in the remaining portion of the garden at the rate of Rs 40 per m² can be found by multiplying the area of the remaining portion by the rate.

Cost of planting grass = Area of remaining portion × Rate

= (900 - 120x + 4x²) × 40

Learn more about area here

brainly.com/question/16555969

#SPJ4

The expected number of throws required is 243/8, or approximately 30.375.

The key to solving this problem is to find the probability that each player will be the odd man out on each flip of the coin, and then use this to calculate the expected number of throws required to eliminate one player.

Let E(l, m, n) be the expected number of throws required to eliminate one player when Hamlet starts with l coins, Rosencrantz starts with m coins, and Guildenstern starts with n coins. We can write the following recursive equations:

E(l, m, n) = 1 + (1/2)(E(l-1, m+1, n) + E(l+1, m-1, n))

E(l, m, n) = 1 + (1/2)(E(l, m-1, n+1) + E(l, m+1, n-1))

E(l, m, n) = 1 + (1/2)(E(l+1, m, n-1) + E(l-1, m, n+1))

The first equation gives the expected number of throws required when Hamlet is the odd man out, the second equation gives the expected number of throws required when Rosencrantz is the odd man out, and the third equation gives the expected number of throws required when Guildenstern is the odd man out.

Using these equations, we can solve for E(14, 6, 6) to get the expected number of throws required when Hamlet starts with 14 coins and Rosencrantz and Guildenstern each start with 6 coins:

E(14, 6, 6) = 243/8

Therefore, the expected number of throws required is 243/8, or approximately 30.375.

We use a recursive approach to find the expected number of throws required to eliminate one player, starting from the initial configuration of 14-6-6 coins. At each step, we consider the three possible cases where one of the players is the odd man out, and calculate the expected number of throws required to eliminate that player. We then take the average of these three values, weighted by the probability that each player will be the odd man out on the next flip of the coin. We repeat this process until only one player is left.

The final answer, 243/8, represents the expected number of throws required to eliminate one player, starting from the initial configuration of 14-6-6 coins. This means that, on average, it will take about 30.375 throws of the coin to eliminate one player and reduce the game to a two-player game.

For more questions like Probability visit the link below:

https://brainly.com/question/15159704

#SPJ11

The value [tex]Cos\theta[/tex] is 20/29 and it can be determined by using the Pythagoras theorem.

Given that,

The value [tex]Sin\theta[/tex] is [tex]\frac{21}{29}[/tex],

We have to determine,

The value of [tex]Cos\theta[/tex]?

According to the question,

To determine the value of [tex]Cos\theta[/tex] following all the given below.

The formula of [tex]Sin\theta[/tex] is,

[tex]Sin\theta=\dfrac{Perpendicular}{Hypotenuse}[/tex]

On comparing to the given value of [tex]Sin\theta[/tex] is,

[tex]Sin\theta=\dfrac{Perpendicular}{Hypotenuse}[/tex]

[tex]sin\theta=\dfrac{21}{29}[/tex]

Here, Hypotenuse = 29, and Perpendicular = 21

Then,

The formula of [tex]Cos\theta[/tex] is,

[tex]Cos\theta=\dfrac{Base}{Hypotenuse}[/tex]

Let, the base be x,

The value of base finding by using Pythagoras theorem,

[tex](Hypotenuse)^2=(Perpendicular)^2+(Base)^2[/tex]

[tex](29)^2=(21)^2+(x)^2[/tex]

[tex]841=441+x^2[/tex]

[tex]x^2=841-441[/tex]

[tex]x^2=400[/tex]

[tex]x=20[/tex]

The value of the base is 20.

Therefore,

[tex]Cos\theta=\dfrac{Base}{Hypotenuse}[/tex]

[tex]cos\theta=\dfrac{20}{29}[/tex]

Hence, The value [tex]Cos\theta[/tex] is 20/29.

For more details about Pythagoras theorem refer to the link given below.

https://brainly.com/question/13710437

The equation 3x² - 12x - 15 = 0 when solved by factoring has the solutions x = 5 and x = -1

The equation 3x² - 12x - 15 = 0, is a representation of the equation in the question.

The aforementioned problem is a quadratic equation, and factoring is one way to solve this kind of issue.

Divide 3 from the equation.

As a result, we have the following

x² - 4x - 5 = 0.

Expanding the equation, we get

x² + x - 5x - 5 = 0.

Factoring the equation, we get

x(x + 1) - 5(x + 1) = 0

The result is

(x - 5)(x + 1) = 0.

We can solve for x by getting

x = 5 and x = -1.

Thus, the equation's answers are 5 and -1.

And it means that there are actually two solutions to the equation.

Read more about equations at

https://brainly.com/question/2972832

#SPJ1

The unit rate for inches per mile is 0.8 inches.

The length of road B is 9.6 inches on map.

Unit rate is the ratio of two different units, with denominator as 1. For example, kilometer/hour, meter/sec, miles/hour, salary/month, etc.

Road in inches = 1 1/5 = 6/5 inches

Road in miles = 1 1/2 miles =

Inches per mile = 6/5 / (3/2)

                         = 6/5 x 2/3

                         = 4/5

                         = 0.8 inches

If the road B is 12 miles long, on the map it would be;

= 0.8 x 12

= 9.6 inches

Learn more about Unit Rate here:

https://brainly.com/question/19908576

#SPJ1

No paint job, no trims, no extra things on the car.

The term "basic" in a car advertisement could have different meanings depending on the context. It could refer to a stripped-down version of a car model that has fewer features and is more affordable, or it could refer to a car that has all the necessary features without any unnecessary add-ons.

In general, when a car is described as "basic," it suggests that the car has a minimal set of features and functions that are essential for driving, but may not have all the bells and whistles that come with higher-end models. A basic car may have a standard transmission, basic stereo system, cloth seats, and manual windows, for example, without any additional features like a sunroof or heated seats.

However, it's important to note that the term "basic" can be subjective and vary depending on the brand, model, and price point. What one person considers basic, another may see as luxurious. So, it's always a good idea to review the specific features and specifications of a car before making a purchase decision, rather than relying solely on advertising language.

The perimeter of a regular octagon, we use the expression 8s, where s represents side length. The perimeter of a regular octagon with side length 1.5 feet is equals to the 12 feet.

Regular octagon is a polygon with eight sides. The perimeter of a polygon is equals to the sum of all its sides. All eight sides of regular octagon are same measure. So, in other words the perimeter of Regular octagon is equal to eight times the length its side. Here,

Side length of a regular octagon

= 1.5 feet

=> Perimeter = 8 × 1.5 feet [An octagon has 8 sides]

=> Perimeter = 12 feet

Hence, required perimeter is 12 feet.

For more information about regular octagon, visit :

https://brainly.com/question/27389561

#SPJ4

The greatest common factor of the two expressions 18y^(7)w^(2)u^(8) and 30y^(5)w^(4)u^(6) is 6y^(5)w^(2)u^(6).

The greatest common factor (GCF) of two expressions is the largest expression that divides both of the expressions. To find the GCF of the two expressions 18y^(7)w^(2)u^(8) and 30y^(5)w^(4)u^(6), we need to find the highest power of each variable that divides both expressions.

The GCF of the coefficients 18 and 30 is 6.

The highest power of y that divides both expressions is y^(5).

The highest power of w that divides both expressions is w^(2).

The highest power of u that divides both expressions is u^(6).

So, the GCF of the two expressions is 6y^(5)w^(2)u^(6).

Therefore, the greatest common factor of the two expressions 18y^(7)w^(2)u^(8) and 30y^(5)w^(4)u^(6) is 6y^(5)w^(2)u^(6).

For more about greatest common factor:

https://brainly.com/question/11221202

#SPJ11

Explanation:

There are 4 white marbles out of 4+10 = 14 total

4/14 = 2/7 is the probability of randomly picking a white marble.

(2/7)*(2/7) = 4/49 is the probability of picking two whites in a row, when the first marble is replaced.

Use a calculator to find that 4/49 = 0.0816 approximately.

That converts to 8.16% after moving the decimal point two spots to the right. This is equivalent to multiplying by 100.

The first system is inconsistent, the second system is consistent and dependent, and the third system is consistent and independent.

A system of equations can be classified as consistent, dependent, or inconsistent. A consistent system has at least one solution. A dependent system has infinitely many solutions, and an inconsistent system has no solution.

The first system of equations, y=-x+1 and y=-x, is inconsistent. This is because there is no value of x that can make both equations true at the same time. The graphs of these equations would be parallel lines that never intersect, meaning there is no solution.

The second system of equations, y=x+2 and y=x, is consistent and dependent. This is because there are infinitely many solutions that make both equations true. The graphs of these equations would be the same line, meaning every point on the line is a solution.

The third system of equations, y=x and y=2x, is consistent and independent. This is because there is only one solution that makes both equations true. The graphs of these equations would be two lines that intersect at one point, meaning there is only one solution.

In summary, the first system is inconsistent, the second system is consistent and dependent, and the third system is consistent and independent.

Learn more about inconsistent

brainly.com/question/11117561

#SPJ11

The possible rational zeros for the given function are ±1, ±2, ±3, ±6.

The Rational Zero Theorem states that if f(x) = anxn + an-1xn-1 + ... + a1x + a0 is a polynomial with integer coefficients, then any rational zero of f(x) must be of the form p/q, where p is a factor of the constant term a0 and q is a factor of the leading coefficient an.

For the given function f(x)=-2x^(3)+x^(2)-4x+6, the constant term is a0 = 6 and the leading coefficient is an = -2.

The factors of the constant term are ±1, ±2, ±3, and ±6, and the factors of the leading coefficient are ±1 and ±2.

Therefore, the possible rational zeros for the given function are ±1/±1, ±2/±1, ±3/±1, ±6/±1, ±1/±2, ±2/±2, ±3/±2, and ±6/±2, which simplifies to ±1, ±2, ±3, and ±6.

To learn more about rational zeros here:

https://brainly.com/question/30661213#

#SPJ11

Plugging in \( x = 1 \) gives us \[ -144 = (1+1)(1-4)(1^2 - 6(1) + 13) = (2)(-3)(8) = -48a \] Solving for \( a \) gives us \[ a = \frac{-144}{-48} = 3 \] So, the expression for \( f(x) \) is \[ f(x) = 3(x+1)(x-4)(x^2 - 6x + 13) \]

To find the expression for \( f(x) \), we need to use the fact that the zeros of a polynomial are the values of \( x \) that make the polynomial equal to zero. This means that if \( -1, 4, \) and \( 3+2i \) are zeros of \( f(x) \), then the factors of \( f(x) \) are \[ (x+1)(x-4)(x-(3+2i))(x-(3-2i)) \] Now, we can simplify the last two factors by multiplying them together: \[ (x-3-2i)(x-3+2i) = (x-3)^2 - (2i)^2 = x^2 - 6x + 9 - 4i^2 = x^2 - 6x + 9 + 4 = x^2 - 6x + 13 \] So, the expression for \( f(x) \) is \[ f(x) = (x+1)(x-4)(x^2 - 6x + 13) \] Now, we can use the fact that \( f(1) = -144 \) to find the value of the leading coefficient of \( f(x) \). Plugging in \( x = 1 \) gives us \[ -144 = (1+1)(1-4)(1^2 - 6(1) + 13) = (2)(-3)(8) = -48a \] Solving for \( a \) gives us \[ a = \frac{-144}{-48} = 3 \] So, the expression for \( f(x) \) is \[ f(x) = 3(x+1)(x-4)(x^2 - 6x + 13) \] This is the final answer.

Learn more about Multiplying

brainly.com/question/30875464

#SPJ11

The gradient of line A is 4/72% or 0.0555.The gradient of line B is -2/6 or -0.3333.

Value is the worth of something, or the amount of importance, good qualities, or benefits that something has. It is determined by the amount of effort, time, and resources that have been put into it. Value can also refer to a person's moral or ethical principles and standards. It is the measure of worth that someone places on something or someone. Ultimately, value is subjective, as it is based on individual opinion.

The gradients of lines A and B indicate the rate of change of the line in relation to the x-axis. The gradient of line A is positive, which indicates that the line is increasing as it moves along the x-axis. This means that the y-value of the line is increasing as the x-value increases. On the other hand, line B has a negative gradient, which means that the y-value of the line is decreasing as the x-value increases. This means that the line is decreasing as it moves along the x-axis. This is why the gradients of lines A and B are different.

To know more about value click-
https://brainly.com/question/25184007
#SPJ1

Answer:

Remove the S and you have IX which is the roman numeral for 9

Answer:

Take away the S and you have IX that would make the roman numeral 9.

Step-by-step explanation:

You're welcome.

The company's profit for selling 10 tractors is $48700.

The total revenue (in hundreds of dollars) for the tractor company, when selling n tractors, is P = 4.4n^(2) + 5n - 3, where n is the number of tractors sold and P is in hundreds of dollars.

To find the company's profit for a given number of tractors sold, we can plug in the value of n into the equation and solve for P.
For example, if the company sells 10 tractors, we can plug in n=10 into the equation:

P=4.4(10)^(2)+5(10)-3
P=4.4(100)+50-3
P=440+50-3
P=487

Therefore, the company's profit for selling 10 tractors is $48700 (since P is in hundreds of dollars).

Similarly, we can plug in different values of n to find the company's profit for different numbers of tractors sold.

For more such questions on Company's profit.

https://brainly.com/question/14542968#

#SPJ11