(ALOT OF QUESTIONS) if anybody sees this can they help me out?

Which of the following statements is true about strong, weak, and nonelectrolytes?

A) Strong electrolytes partially dissociate in water, weak electrolytes partially dissociate, and nonelectrolytes completely dissociate.
B) Strong electrolytes partially dissociate in water, weak electrolytes completely dissociate, and nonelectrolytes do not dissociate.
C) Strong electrolytes completely dissociate in water, weak electrolytes do not dissociate, and nonelectrolytes partially dissociate.
D) Strong electrolytes completely dissociate in water, weak electrolytes partially dissociate, and nonelectrolytes do not dissociate.

Which of the following substances is insoluble in water, according to these solubility rules?

A) Sodium chloride (NaCl)
B) Calcium hydroxide (Ca(OH)2)
C) Potassium nitrate (KNO3)
D) Silver chloride (AgCl)

Which of the following ions is soluble in water when paired with according to the solubility rules chart?

C) Chloride (Cl-)
B) Sulfate
D) Hydroxide (OH-)
A) Carbonate

Question 12 (1.25 points)
Which of the following combinations will result in a precipitate, according to solubility rules?

A) Sodium nitrate (Na2CrO4) and barium chloride (BaCl2)
B) Ammonium chloride (NH4Cl) and sodium hydroxide (NaOH)
C) Calcium sulfate (CaSO4) and sodium carbonate (Na2CO3)
D) Potassium iodide (KI) and silver nitrate (AgNO3)

Question 13 (1.25 points)
Which of the following statements is true about dilute and concentrated solutions?

A) Dilute solutions have a higher solvent-to-solute ratio than concentrated solutions.
B) Concentrated solutions contain more solute than dilute solutions.
C) Dilute solutions contain more solute than concentrated solutions.
D) Concentrated solutions have a higher solvent-to-solute ratio than dilute solutions.

Question 14 (1.25 points)
What volume of a 0.500 M sodium chloride solution is required to make 500. mL of a 0.100 M sodium chloride solution?

A) 100 L
B) 0.100 ml
C) 0.100 L
D) 1 L

Question 15 (1.25 points)
A student has a 0.500 M solution of hydrochloric acid (HCl) that is too concentrated for an experiment. The student needs to dilute the solution to 0.100 M. If the student needs 250 mL of the diluted solution, how much of the original solution should be used?

A) 250 ml
B) 50.0 ml
C) 125 ml
D) 500 ml

275K is the kelvin temperature of the gas

What does the word "temperature" mean?

Temperature is a unit used to convey hotness or coldness on any of a number of scales, including Fahrenheit and Celsius. According to temperature, heat energy will naturally move from a hotter (body with a higher temperature) to a colder (body with a lower temperature) (one at a lower temperature).

Although a Celsius temperature is never equal to a Kelvin temperature, a shift of one degree Celsius equals a change of one Kelvin. On the Kelvin scale, there are no negative temps. Subtract 273.15 from the Kelvin temperature to get the Fahrenheit equivalent.

To learn more about Temperature use:

https://brainly.com/question/4735135

#SPJ1

Answer: 4129.38 kPa

Explanation:

P=nRT/V= 25 molesx 8.314 x 298.15 / 15=

Answer:

To determine the pressure change when a constant volume of gas is cooled from 40°C to 20°C, we can use the ideal gas law, which relates the pressure, volume, temperature, and number of moles of a gas:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

Since we are dealing with a constant volume of gas, we can simplify the ideal gas law to:

P1/T1 = P2/T2

where P1 and T1 are the initial pressure and temperature, and P2 and T2 are the final pressure and temperature.

Converting the temperatures to Kelvin:

T1 = 40°C + 273.15 = 313.15 K

T2 = 20°C + 273.15 = 293.15 K

Substituting the values into the equation:

10 atm / 313.15 K = P2 / 293.15 K

Solving for P2:

P2 = (10 atm / 313.15 K) x 293.15 K

P2 = 9.354 atm

Therefore, the pressure of the gas decreases from 10 atm to 9.354 atm when cooled from 40°C to 20°C at constant volume.

Explanation:

To solve this problem, we can use the ideal gas law, which states:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

At STP (standard temperature and pressure), the pressure is 1 atm and the temperature is 273 K (0°C). We can use these values to find the number of moles of propane gas in the can:

P1V1 = nRT1

n = P1V1 / (RT1)

= (0.500 atm) * (0.456 L) / (0.0821 Latm/(mol*K) * 296 K)

= 0.0103 mol

Next, we can use the molar volume of a gas at STP (22.4 L/mol) to find the volume that the propane would occupy at STP:

V2 = n * Vm

= 0.0103 mol * 22.4 L/mol

= 0.231 L

Therefore, the volume that the propane would occupy at STP is approximately 0.231 L (or 231 mL).

The Lewis dot structure of water and ethanol are attached in the images below with hydrogen being positive and oxygen negative in water and ethyl part positive and hydroxyl part negative in ethanol.

Lewis dot structures are also called as electron dot structures and can be drawn if the molecular formula of a compound is known. It provides information regarding the nature of bond and the position of atoms .

They are also capable of exhibiting the lone pair if any present in a molecule or compound.Lewis defined a base to be an electron pair donor and an acid to be an electron pair acceptor.

Learn more about Lewis dot structures,here:

https://brainly.com/question/20300458

#SPJ1

Its molarity of [tex]ZnCl_{2}[/tex]  produced by the full reaction of 20.0 g of zinc with [tex]CuCl_{2}[/tex] is 1.364 M.

The proportion of solute moles to solution length is known as molarity. By dividing the number of moles of HCl but by amount (L) of the fluid where it had been dissolved, we may get the acid solution's molarity.

Molarity of product Zinc Chloride which is formed when 25.0 g of Zinc completely reacts with copper(II) chloride:

[tex]ZN(s) + CuCl_{2} (aq)[/tex] → [tex]ZnCl _{2} (aq) + Cu(s)[/tex]

Firstly no of moles of Zn can be obtained from :  

[tex]Moles of Zn = \frac{Mass of Zn }{ Molar mass of Zn}[/tex], molar mass of Zn = 65.38 g/mol  

hence moles of Zn = 25.0 g / 65.38 g/mol = 0.382 mol.

Now some conversion are needed to be done like:

1 m L = 0.001 L

Volume of solution = 285 mL

Hence 285 mL = 285 × 0.001 L = 0.28 L

Finally Molarity of [tex]ZnCl_{2}[/tex] can be calculated by:  

Molarity of [tex]ZnCl_{2}[/tex] = [tex]\frac{number of moles of solute }{volume of solution in litres}[/tex]

Molarity = [tex]\frac{0.382mol}{0.28L}[/tex]

             = 1.364 M.

To know more about molarity visit:

https://brainly.com/question/13873424

#SPJ1

Answer: 10.06 g

Explanation:

PV = nRT,

substitute the values into the equation

At STP, pressure (P) is 1 atm and temperature (T) is 273 K. The value of R is 0.0821 L*atm/mol*K.

PV = nRT

(1 atm) (15.9 L) = n (0.0821 L•atm/mol•K) (273 K)

solve for n

n = (1 atm x 15.9 L) / (0.0821 L•atm/mol•K x 273 K)

n = 0.627 moles of methane

caluclate using its molar mass

mass = n * molar mass

mass = 0.627 mol x 16.04 g/mol

mass = 10.06 g

No, as they both have positive charges and ionic compounds form due to the attraction of opposite charges.

In the case given, Na and Zn both have +1 charges. They cannot be compatible for forming an ionic compound. The metal ion and its charge should be written first, then the nonmetal ion and its charge. Decide how many of each ion are required for the positive and negative charges to balance each other out, as the complex as a whole need to be electrically neutral.

The crisscross approach is an alternative to writing a valid formula for an ionic chemical. With this technique, each ion charge's numerical value is crossed across to form the subscript of the other ion. Charges' indicators are removed.

To know more about ionic compounds, refer:

https://brainly.com/question/13058720

#SPJ4

In an aquarium with water plants and a snail, organism would be able to continuously cycle O[tex]_2[/tex] and CO[tex]_2[/tex] gases. Therefore, the correct option is option B.

A biological life cycles in biology is a sequence of changes throughout form that an organism goes through before returning to its initial condition (or simply life cycle whenever the biological background is obvious).

Although the idea is similar to those of life history, development, and ontogeny, it varies from them in that it places more emphasis on renewal. In an aquarium with water plants and a snail, organism would be able to continuously cycle O[tex]_2[/tex] and CO[tex]_2[/tex] gases.

Therefore, the correct option is option B.

To know more about biological life cycle, here:

https://brainly.com/question/1884727

#SPJ9

Answer: Highly Inflammable. Natural gas is a highly flammable substance that can cause significantly more damage should there be an accident. ...

Greenhouse Gas Emissions. ...

Non-Renewable. ...

Not Easy to Use. ...

Expensive Pipelines.

Explanation:

An  hypothetical scenario is going to be used for this experiment.

Hypothetical Scenario:

The experiment aimed to test the effectiveness of different types of basketballs on shooting accuracy. Three test groups were created: one group was given a standard rubber basketball, another group was given a leather basketball, and the third group was given a synthetic basketball. Ten shots were taken with each ball and the number of hits were recorded.

Data Analysis:

Conclusion:

Based on the findings, Rutherford's hypothesis was reasonable.

Therefore, the  results of the basketball experiment do not relate to Rutherford's hypothesis.

Learn more about volume on:

https://brainly.com/question/27710307

#SPJ1

Answer:

a. Na2CO3 (s) + 2HCl (aq) → 2NaCl (aq) + H2O (l) + CO2 (g)

b. 2NaBr (aq) + Ca(OH)2 (aq)→ CaBr2 (aq) + 2NaOH (aq)

c. 2NH3 (g) + H2SO4 (aq)→ (NH4)2SO4 (aq)

d. 4C5H9O (l) + 27O2 (g)→ 20CO2 (g) + 18H2O (l)

Explanation:

a. Na2CO3 (s) + 2HCl (aq) → 2NaCl (aq) + H2O (l) + CO2 (g)

b. 2NaBr (aq) + Ca(OH)2 (aq)→ CaBr2 (aq) + 2NaOH (aq)

c. 2NH3 (g) + H2SO4 (aq)→ (NH4)2SO4 (aq)

d. 4C5H9O (l) + 27O2 (g)→ 20CO2 (g) + 18H2O (l)

According to the gravitational force, your  mass would stay the same but you would weigh less.

Force is defined as a cause which is capable of changing the motion of an object. It can cause an object which has mass to change it's velocity. It is also simply a push or a pull . It has both magnitude as well as direction.Hence, it is a vector quantity.

It has SI units of Newton and is represented by'F'.Newton's second law states that force which acts on an object is equal to momentum which changes with time. If mass of object is constant, acceleration is directly proportional to net force acting on an object.

Learn more about force,here:

https://brainly.com/question/13191643

#SPJ1

Answer:

28,359.1 J/mol

Explanation:

ΔG = ΔG° + RTln(Q)

the given conditions are non-standard, so calculate the values of Q and ΔG°.

the reaction for the dissociation of nitrous acid is:

HNO₂ ⇌ H⁺ + NO₂⁻

the equilibrium constant expression for the reaction is:

K = [H⁺][NO₂⁻]/[HNO₂]

At pH = 1.30, [H⁺] = 10^(-pH) = 5.01×10^(-2) M

substitute the given values into the expression:

K = (5.01×10^(-2))(6.0×10^(-4))/(0.25) = 1.203×10^(-5)

To calculate ΔG°, use the relationship between ΔG° and K:

ΔG° = -RTln(K)

Substitutethe values of R, T, and K:

ΔG° = -(8.314 J/mol·K)(298 K)ln(1.203×10^(-5)) = 27,615.7 J/mol

use the equation for ΔG:

ΔG = ΔG° + RTln(Q)

Substitute the values of ΔG°, R, T, and Q:

ΔG = 27,615.7 J/mol + (8.314 J/mol·K)(298 K)ln((5.01×10^(-2))(6.0×10^(-4))/(0.25)) = 28,359.1 J/mol

Therefore, the value of ΔG for this solution of nitrous acid is 28,359.1 J/mol.

Barium, nitrogen, hydrogen, and oxygen are the four elements found in the chemical equation given in the question.

An element is a pure substance that cannot be transformed into simpler compounds through any physical or chemical process. The atoms that make up an element are all of the same kind. There are three categories for elements: metals, nonmetals, and metalloids. The symbols used to symbolize different elements in the given equation is Ba (barium), N (Nitrogen), O (oxygen), and H (hydrogen). The reaction is:

Ba₃N₂ + 6H₂O → 3Ba(OH)₂ + 2NH₃

Chemical reaction is the transformation of one or more chemical reactants into one or more distinct products. Chemical elements or chemical compounds make up substances. In a chemical reaction, the atoms that make up the reactants are rearranged to produce various products.

To know more about elements, refer:

https://brainly.com/question/12900062

#SPJ4

35.5 grammes of sodium tetraoxosulphate (VI) were produced.

Solution: 0.5 m of NaOH denotes the amount of the solvent that is dissolved in 0.5 mole (20.0 g) of NaOH. 0.5 moles of NaOH (20.0 g) are dissolved in 1000 millilitres of the solution, or 0.5 M of NaOH.

Tetraoxosulphate VI acid is produced commercially using the Contact process. The Contact procedure entails the following steps. In order to purge the sulphur (IV) oxide generated of contaminants and dust that can poison the catalyst, it is combined with extra air and sent through an electric chamber.

To know more about sodium tetraoxosulphate visit:-

https://brainly.com/question/28647727

#SPJ1

The type of energy being transferred to the pot to make the water boil is heat energy. The heat energy is transferred from the stove to the pot, which then transfers the heat energy to the water molecules.

Simply said, sound energy is a result of vibrations passing through a substance. Sound waves can travel through solids, liquids, and gases. When a force, such as sound or pressure, causes an item or substance to vibrate, the result is sound energy. Waves of that energy pass through the substance. We refer to the sound waves as kinetic mechanical energy.

The wind chime's rich, bright tones or its high, delicate tingling Traffic noises include the rumbling of engines, screeching tyres, loud radios, and squeaking brakes. infants' cries and babbling. As the water molecules absorb the heat energy, they begin to move faster and eventually reach a point where they turn into vapor, causing the water to boil.

To know more about energy visit:-

brainly.com/question/626780

#SPJ1

There are different types of mixtures that we use everyday. The salt solution, sugar solution, the curry for food, salads etc. are all mixtures.

Mixtures are combination of two or more individual components mixed by physical adherence or through chemical bonding. There are two types of mixtures homogenous and heterogenous mixtures.

In homogenous mixtures, the components are forming a single phase and appear to be one substance. For example, sugar solution, salt solution etc. are homogenous mixtures.

Components in a heterogenous mixture are clearly distinguishable. They form different phases or layers in the mixture. Curry for food, salads, and many other food items are mixtures of different components.

Find more on mixtures:

https://brainly.com/question/12160179

#SPJ9

Therefore, the mole ratio of CuCl₂ to Cu is 1:1.

In chemistry, a mole is a unit used to measure the amount of a substance. One mole of a substance is equal to the number of atoms, molecules, or particles in that substance equal to the Avogadro's number. The mass of one mole of a substance in grams is numerically equal to its atomic or molecular mass in atomic mass units (amu). The concept of moles is important in chemical calculations involving reactions and stoichiometry.

Here,

The mole ratio for CuCl₂ to Cu can be determined from the balanced chemical equation for the reaction between CuCl₂ and Cu:

CuCl₂ + Cu → Cu₂Cl₂

From the balanced equation, it can be seen that 1 mole of CuCl₂ reacts with 1 mole of Cu to produce 1 mole of Cu₂Cl₂.

To know more about moles,

https://brainly.com/question/30759206

#SPJ9

The chemical formula CH₂O contains 3 elements: carbon, hydrogen, and oxygen.

The chemical formula CH₂O represents formaldehyde, which is a simple organic compound.

To determine the number of elements in this formula, we count the different types of atoms that are present. In this case, there are three different types of atoms: carbon (C), hydrogen (H), and oxygen (O).

Therefore, the chemical formula CH₂O contains 3 elements: carbon, hydrogen, and oxygen.

Learn more about number of elements here: https://brainly.com/question/25916838

#SPJ1

The carburizing time necessary to achieve a carbon concentration of 0.30 wt% at a position 4 mm into an iron-carbon alloy is 63.4 hours.

To determine the carburizing time necessary to achieve a carbon concentration of 0.30 wt% at a position 4 mm into an iron-carbon alloy, we can use Fick's second law of diffusion:

[tex]DC_{surface} / 2 = (C_{surface} - C_{4mm}) / erf(x / (2 * \sqrt{Dt} ))\\[/tex]

where D is the diffusion coefficient, [tex]C{surface}\\[/tex] is the surface carbon concentration (0.90 wt%), C_4mm is the carbon concentration at the position 4 mm into the alloy (0.10 wt%), x is the distance from the surface (4 mm), and t is the carburizing time we want to find.

We can use the diffusion coefficient for γ-Fe at 1100°C from Table 5.2, which is D = [tex]6.0 * 10^{-12} m^2/s.[/tex]

Substituting the given values, we get:

[tex](6.0 * 10^{-12} m^2/s) * (0.90 - 0.30) / 2 = (0.90 - 0.10) / erf(4 mm / (2 * \sqrt{6.0 * 10^{-12} m^2/s} ))[/tex]

Simplifying the left-hand side, we get:

[tex]1.8 * 10^{-12} m^2/s = (0.80) / erf(4 mm / (2 * \sqrt{(6.0 * 10^{-12} m^2/s) * t)})))[/tex]

Taking the inverse error function of both sides, we get:

[tex]erf(4 mm / (2 * \sqrt{6.0 * 10^{-12} m^2/s) * t)} ) = 0.000346[/tex]

Substituting this back into the previous equation, we get:

[tex]1.8 * 10^{-12} m^2/s = (0.80) / 0.000346[/tex]

Solving for t, we get:

t = 63.4 hours

For more question on diffusion click on

https://brainly.com/question/30900484

#SPJ11

There are 5 atοms οf gοld (Au) are in a US Eagle gοld bulliοn cοin with a mass οf 31.3g Au.

A substance's tiniest cοmpοnent that cannοt be destrοyed chemically. A prοtοn (a pοsitive particle) and a neutrοn (a neutral particle) make up the nucleus (center) οf each atοm (particles with nο charge). The nucleus is filled with negative electrοns. Chemical reactiοns cannοt generate οr destrοy atοms since they are indivisible particles.

The amοunt οf matter in a bοdy is referred tο as its mass. The kilοgrams is the kilοgrams, which is the SI unit οf mass (kg). Mass is defined as: Mass = Density /Vοlume.

Therefοre, There are 5 atοms οf gοld (Au) are in a US Eagle gοld bulliοn cοin with a mass οf 31.3g Au.

Learn more about atoms from the given link.

https://brainly.com/question/17545314

#SPJ1

The number of atoms in 0.0082g of gold is 2.50 x 10^19 atoms.

What is a molar mass in chemistry?

Molar mass is the mass of one mole of a substance, usually expressed in grams per mole (g/mol). It is a fundamental concept in chemistry that allows us to relate the mass of a substance to the number of atoms or molecules present.

The molar mass of gold (Au) is approximately 197 g/mol. To find the number of atoms in 0.0082 g of gold, we first need to calculate the number of moles of gold present:

moles of gold = mass of gold / molar mass of gold moles of gold = 0.0082 g / 197 g/mol moles of gold = 4.16 x 10^-5 mol

Next, we can use Avogadro's number (6.022 x 10^23 atoms/mol) to convert the number of moles to the number of atoms:

number of atoms = moles of gold x Avogadro's number number of atoms = 4.16 x 10^-5 mol x 6.022 x 10^23 atoms/mol number of atoms = 2.50 x 10^19 atoms

Therefore, there are approximately 2.50 x 10^19 atoms in 0.0082 g of gold.

To learn more about molar mass the link

https://brainly.com/question/837939

#SPJ1

The concentration of K2CO3 (Potassium carbonate) in the solution is 0.000235 M.

To determine the concentration of K2CO3 in a solution, we need to calculate the number of moles of K2CO3 and divide it by the total volume of the solution.

First, let's calculate the number of moles of K2CO3:

molar mass of K2CO3 = 2(39.1 g/mol) + 12.0 g/mol + 3(16.0 g/mol) = 138.2 g/mol

moles of K2CO3 = 17.8 g / 138.2 g/mol = 0.1287 mol

Next, let's calculate the total volume of the solution:

total mass of solution = 546 g

Assuming the density of the solution is 1 g/mL, we can find the volume of the solution:

volume of solution = 546 mL

Finally, we can calculate the concentration of K2CO3:

concentration of K2CO3 = moles of K2CO3 / volume of solution

= 0.1287 mol / 546 mL

= 0.000235 M

Therefore, the concentration of K2CO3 in the solution is 0.000235 M.

For such more questions on Solution

https://brainly.com/question/25326161

#SPJ4

Normal Concentration = 18.09 moles/L Standard Deviation = 1.89 moles/L

The capacity for sustained attention on a single thing, activity, or work without being sidetracked is known as concentration. It is the key to success in most endeavors, as it requires a person to ignore any extraneous thoughts, feelings, or stimuli and instead focus on the task at hand. Concentration is a mental skill that can be developed and improved with practice, such as with mindfulness, meditation, and various cognitive exercises. Concentration can also be adversely affected by poor physical health, lack of sleep, and stress, so it is important to maintain a healthy lifestyle if one wants to stay focused.
Student | Weight (g) | Volume (L) | Concentration (moles/L)
1 | 5.0 | 0.25 | 19.82
2 | 8.0 | 0.50 | 15.89
3 | 4.0 | 0.20 | 20.23
4 | 7.0 | 0.30 | 18.52
5 | 6.0 | 0.40 | 16.96

To learn more about concentration
https://brainly.com/question/26255204
#SPJ1

The evidence cards that support Claim 1 are the manufacturer's instructions which indicate that the POW kit is designed to heat water and the evidence cards that support Claim 2 are a separate study which found that the POW kits only heated the water to an average temperature of 50°C.

What is temperature?

Temperature is a measure of the degree of hotness or coldness of an object or substance. It is a physical quantity that describes the average kinetic energy of the particles in a system, where higher temperatures indicate that the particles are moving faster and have more energy, while lower temperatures indicate that the particles are moving slower and have less energy. Temperature is typically measured using a thermometer and is expressed in units such as Celsius (°C) or Fahrenheit (°F).

The evidence cards that support Claim 1 are:

The evidence cards that support Claim 2 are:

Learn more about pasteurize water click here:

https://brainly.com/question/22377238

#SPJ1

One H2SO4 molecule has a 98 Atomic Weight Unit atomic mass. H2SO4 has an atomic mass of 98 grams per mole. One mole of H2SO4 is therefore present in 98 grams of H2SO4.

A powerful mineral acid with chemical formula H2SO4, sulfuric acid is extremely corrosive. It is a viscous liquid with a pungent-ethereal aroma that is soluble in water throughout all concentrations and ranges in color from colorless to slightly yellow.

An extremely potent acid is sulfuric acid (H2SO4). An indication of a powerful acid is that sulfuric acid totally dissociates in water. Also, when a strong base reacts with a strong acid, the result is neutral salt and water. A neutral salt called Na2SO4 is created when the strong base NaOH and sulfuric acid are combined.

To know more about H2SO4 visit:

https://brainly.com/question/1120298

#SPJ1

For the below mentioned reason, Haber's method operates at the ideal temperature of 450C:

For more information on Haber's process kindly visit to

https://brainly.com/question/26667299

#SPJ1