The correct answer is d. strict regulation of the economy.
During the 1920s, American Economic policy included low taxes, protections for business, and high tariffs. However, the government did not implement strict regulation of the economy during this time period.
All of the following were part of American Economic policy during the 1920s EXCEPT: d. strict regulation of the economy.
The economy refers to the system of production, distribution, and consumption of goods and services within a society. It includes all economic activity, from individual transactions to national and international markets.
Economies can be classified into different types, such as market economies, where the production and distribution of goods and services is largely determined by supply and demand, or command economies, where the government controls the means of production and distribution.
Most modern economies are mixed economies, where both government and private enterprise play a role in the production, distribution, and consumption of goods and services.
Visit here to learn more about economy brainly.com/question/2421251
#SPJ11
Economists generally support? A. government management of trade. B. free international trade. C. export subsidies (government payments to producers to sell goods abroad). D. trade restrictions. A Moving to another question will save this response.
Economists generally support B. free international trade. This is based on the principle of comparative advantage, and free trade ultimately promotes economic growth, innovation, and prosperity. Government management of trade, export subsidies, and trade restrictions are often opposed by economists as they can create inefficiencies, market distortions, and negative impacts on global trade relations.
Free international trade allows countries to specialize in producing goods and services they are most efficient at, leading to an overall increase in global output and well-being. This is based on the principle of comparative advantage, which suggests that nations should focus on producing goods and services in which they have a lower opportunity cost compared to other countries. By engaging in free trade, countries can benefit from the exchange of goods and services, ultimately promoting economic growth, innovation, and prosperity.
Economists often argue against A. government management of trade, C. export subsidies, and D. trade restrictions, as they can lead to inefficiencies and market distortions. Government management of trade, export subsidies, and trade restrictions can create an environment that protects domestic industries from global competition, resulting in reduced incentives for businesses to innovate, become more efficient, and provide consumers with the best products at the lowest prices. Additionally, these policies may trigger retaliation from other countries, leading to trade wars and negative impacts on global trade relations.
In summary, economists generally support free international trade, as it promotes global economic growth, efficiency, and innovation, while allowing countries to specialize in producing goods and services they are most competitive at. Conversely, economists tend to oppose government management of trade, export subsidies, and trade restrictions, as they can lead to inefficiencies, market distortions, and strained trade relations. Thus correct option is B. free international trade.
Learn more about trade restrictions: https://brainly.com/question/20033961
#SPJ11
Consider each of the transactions below. All of the expenditureswere made in cash.The Edison Company spent $26,000 during the year forexperimental purposes in connection with the development of a newproduct.In April, the Marshall Company lost a patent infringement suitand paid the plaintiff $9,000.In March, the Cleanway Laundromat bought equipment. Cleanwaypaid $20,000 down and signed a noninterest-bearing note requiringthe payment of $25,000 in nine months. The cash price for thisequipment was $39,000.On June 1, the Jamsen Corporation installed a sprinkler systemthroughout the building at a cost of $42,000.The Mayer Company, plaintiff, paid $26,000 in legal fees inNovember, in connection with a successful infringement suit on itspatent.The Johnson Company traded its old machine with an original costof $14,400 and a book value of $7,200 plus cash of $10,800 for anew one that had a fair value of $14,200. The exchange hascommercial substance.
The journal entries for the given transactions are: Edison Company's expenditure of $15,000 for experimental purposes: Research and Development Expense 15,000, Cash 15,000
Marshall Company's payment of $9,000 to the plaintiff for patent infringement:
Loss from Patent Infringement 9,000
Cash 9,000
Cleanway Laundromat's purchase of equipment:
Equipment 26,000
Note Payable 19,500
Cash 9,000
(To record the down payment and note issued)
Jamsen Corporation's installation of a sprinkler system:
Building Improvements 31,000
Cash 31,000
Mayer Company's payment of $15,000 in legal fees for a successful patent infringement suit:
Legal Fees Expense 15,000
Cash 15,000
Johnson Company's exchange of old machine and cash for a new one:
Equipment (new machine) 10,900
Accumulated Depreciation (old machine) 3,900
Cash 8,600
Gain on Disposal of Equipment 200
(To record the exchange of old machine and cash for a new one with commercial substance)
To know more about journal entries, refer here:
https://brainly.com/question/28390337#
#SPJ11
Complete question:
Consider each of the transactions below. All of the expenditures were made in cash. The Edison Company spent $15,000 during the year for experimental purposes in connection with the development of a new product. In April, the Marshall Company lost a patent infringement suit and paid the plaintiff $9,000. In March, the Cleanway Laundromat bought equipment. Cleanway paid $9,000 down and signed a noninterest-bearing note requiring the payment of $19,500 in nine months. The cash price for this equipment was $26,000. On June 1, the Jamsen Corporation installed a sprinkler system throughout the building at a cost of $31,000. The Mayer Company, plaintiff, paid $15,000 in legal fees in November, in connection with a successful infringement suit on its patent. The Johnson Company traded its old machine with an original cost of $8,900 and a book value of $3,900 plus cash of $8,600 for a new one that had a fair value of $10,900. The exchange has commercial substance. Required: Prepare journal entries to record each of the above transactions. (If no entry is required for a transaction/event, select "No journal entry required" in the first account field.)
proponents of the approach to leadership believe that the most effective leadership behavior depends on the circumstances at hand. multiple choice question. transactional transformational situational servant
The answer to the multiple-choice question is situational.
Proponents of the situational approach to leadership believe that effective leadership behavior depends on the specific circumstances at hand. In other words, there is no one-size-fits-all approach to leadership, as the most effective strategies will vary depending on the situation.
The situational approach to leadership emphasizes the importance of adapting leadership styles to fit the needs of the situation and the individuals being led. Leaders who use this approach must be able to analyze the situation and determine the best course of action, whether that means being more directive or more supportive.
This approach is often contrasted with other leadership styles, such as transactional and transformational. Transactional leadership involves exchanging rewards for performance, while transformational leadership focuses on inspiring and empowering followers to achieve their potential. Servant leadership, on the other hand, emphasizes the leader's responsibility to serve the needs of their followers.
Overall, the situational approach to leadership is considered one of the most effective because it takes into account the specific needs and challenges of each situation. This flexibility allows leaders to adapt their strategies as needed, ensuring that they are able to achieve their goals and support their followers in the most effective way possible.
Know more about the "situational approach to leadership".
https://brainly.com/question/29442676
#SPJ11
as output is expanded, if marginal cost (mc) is less than average total cost (atc),
If the output is expanded and the marginal cost (MC) is less than the average total cost (ATC), ATC must be at its maximum and it would be profitable for the firm to produce additional units of output.
This is because the MC is the cost of producing one more unit of output, while the ATC is the total cost per unit of output. If the MC is less than the ATC, it means that the cost of producing one more unit is less than the average cost of producing all units, which would result in a decrease in the overall cost per unit.
Therefore, the firm would benefit from producing more output, as long as the demand for the product is high enough to generate sufficient revenue to cover the costs.
To sum up, when output is expanded and marginal cost (MC) is less than average total cost (ATC), it means that the addition of each new unit of production is costing less than the average cost per unit. As a result, the average total cost will decrease as output increases.
If you need to learn more about marginal cost click here:
https://brainly.com/question/12231343
#SPJ11
suppose the trophic efficiency between producers and herbivores is 0.1, the tropic efficiency between herbivores and carnivores is 0.15, and primary production is 1,200 units per day. what is the secondary production of carnivores?
To calculate the secondary production of carnivores, we need to first understand the concept of trophic efficiency. Trophic efficiency refers to the amount of energy transferred from one trophic level to the next. In this case, we know that the trophic efficiency between producers and herbivores is 0.1, which means that only 10% of the energy produced by the producers is transferred to the herbivores.
Next, we know that the trophic efficiency between herbivores and carnivores is 0.15, which means that only 15% of the energy from the herbivores is transferred to the carnivores.
Now, we can calculate the secondary production of carnivores using the following formula:
Secondary production = Primary production x Trophic efficiency1 x Trophic efficiency2
Plugging in the values, we get:
Secondary production = 1,200 units per day x 0.1 x 0.15 = 18 units per day
Therefore, the secondary production of carnivores is 18 units per day.
To know more about Primary production, refer to:
https://brainly.com/question/13956603
#SPJ11
dr. jones lives in a country with a progressive tax system. that is, he does not pay any taxes on the first in income he makes, he pays taxes on the next , he pays taxes on the next , he pays on the next , and he pays on every additional dollar onwards. if dr. jones pays in taxes, then how much income does he make?
To calculate how much income Dr. Jones makes, we need to use the information given about the progressive tax system in his country. Since he does not pay taxes on the first amount of income he makes, we know that his income must be at least .
Next, we can calculate how much he would pay in taxes on the next , which is the amount he makes after the tax-free amount. We know that he pays a certain percentage of taxes on this amount, so we can set up an equation:
= Solving for , we get:
= Now we can add the tax-free amount and the amount he makes after taxes to find his total income: +
= Therefore, Dr. Jones makes in income.
To know more about progressive tax visit:
https://brainly.com/question/1022789#SPJ11true or false both public and private colleges measure and report most transactions in a similar manner
The statement given " both public and private colleges measure and report most transactions in a similar manner" is false because public colleges and private colleges have different sources of funding and accounting practices, leading to differences in how they measure and report transactions.
Public and private colleges have different funding sources and accounting practices, which leads to differences in how they measure and report financial transactions. Public colleges are typically funded by state governments, and are subject to greater scrutiny and regulation. Private colleges, on the other hand, rely on tuition, donations, and endowments to fund their operations. As a result, private colleges have more flexibility in their accounting practices, and may report transactions differently than public colleges.
For example, private colleges may be more likely to report gifts and endowment income separately from other revenue streams. These differences in accounting practices can make it difficult to compare financial data between public and private colleges.
You can learn more about transactions at
https://brainly.com/question/1016861
#SPJ11
jerry is a 30 percent partner in the jjm partnership when he sells his entire interest to lucia for $56,000 cash. at the time of the sale, jerry's basis in jjm is $32,000. jjm does not have any debt or hot assets. what is jerry's gain or loss on the sale of his interest?
Jerry has a gain of $24,000 on the sale of his partnership interest when jerry is a 30 percent partner in the JJM partnership.
Jerry sold his 30% partnership interest in JJM to Lucia for $56,000 cash. At the time of the sale, Jerry's basis in JJM is $32,000. Since there are no debt or hot assets involved, the calculation is straightforward:
Now follow these steps to get Gain (or loss):
Gain (or loss) = Selling price - Basis
In this case, Jerry's gain is:
Gain = $56,000 - $32,000 = $24,000
Therefore, Jerry has a gain of $24,000 on the sale of his partnership interest.
To know more about JJM partnership visit
https://brainly.com/question/14685245
#SPJ11
when are individual incentive pay plans most effective? group of answer choices when sophisticated methodologies are required when quality is more important than quantity when rewards occur on a real-time basis when performance can be subjectively assessed when tied to year-end profitability
Individual incentive pay plans are most effective when performance can be subjectively assessed.
This is because individual performance can vary greatly depending on the specific tasks and responsibilities assigned to each employee, making it difficult to accurately measure success using a simple quantitative metric. By allowing for subjective assessments, managers can take into account individual effort, creativity, and adaptability, among other factors, when determining incentive pay. Additionally, individual incentive pay plans may be effective when rewards occur on a real-time basis, as this can help employees stay motivated and engaged in their work. However, such plans may be less effective when tied to year-end profitability, as this may not accurately reflect individual contributions to overall company success.
To know more about incentive pay plans visit:
https://brainly.com/question/29220754#SPJ11a new s corporation shareholder can revoke the s election unilaterally, if they own how much of the existing s corporation's stock?
Yes, a new S corporation shareholder can revoke the S election unilaterally, but only if they own less than 50% of the existing S corporation's stock. If the new shareholder owns 50% or more of the corporation's stock, they cannot revoke the S election without the consent of the other shareholders.
An S corporation is a type of corporation that is taxed similarly to a partnership, with profits and losses flowing through to the shareholders' personal tax returns. To qualify as an S corporation, a corporation must meet certain eligibility requirements and file Form 2553 with the IRS. Once the S election is made, it remains in effect unless the corporation voluntarily revokes it or fails to meet the eligibility requirements.
A new shareholder in an S corporation can revoke the S election unilaterally, but only if they own less than 50% of the corporation's stock. This is because the S corporation election is a voluntary election made by the shareholders, and if a new shareholder acquires less than 50% of the corporation's stock, they do not have the power to control the corporation and make unilateral decisions such as revoking the S election.
However, if the new shareholder owns 50% or more of the corporation's stock, they have the power to control the corporation and make unilateral decisions, including the revocation of the S election. In this case, the new shareholder would need the consent of the other shareholders to revoke the S election.
In conclusion, a new S corporation shareholder can revoke the S election unilaterally, but only if they own less than 50% of the corporation's stock. If they own 50% or more of the corporation's stock, they need the consent of the other shareholders to revoke the S election.
To know more about Shareholder visit:
https://brainly.com/question/31687599
#SPJ11
an agreement made with an intention to defraud creditors or other persons is referred to as a(n)
An agreement made with an intention to defraud creditors or other persons is referred to as a agreement against public policy.
A contract is an agreement that is legally enforceable; (i) a voidable contract is an agreement that is legally enforceable at the option of one or more parties but not at the option of the other or others; and (j) a contract that ceases to be legally enforceable by law becomes void when it ceases to be enforceable.
Such agreements are void contracts (sometimes known as "void agreements") since they are either unlawful in nature or go against fairness or public policy. Agreements employ nominal concerns while attempting to pass off superfluous pledges as genuine transactions. Unless they determine that the specified consideration was genuinely bartered for, courts typically decline to uphold such agreements.
To lean more about agreement, click here.
https://brainly.com/question/31538751
#SPJ1
selling complementary items-your customer called to order compression pants and tells you he recently got a gym membership. what do you do?
When a customer orders compression pants and mentions their recent gym membership, it's an excellent opportunity to suggest complementary items that can enhance their workout experience.
As a sales representative, it is essential to take note of every detail given by the customer, including the fact that they recently got a gym membership. It presents an opportunity to suggest complementary items that can enhance their workout experience. To make the most of this opportunity, you can suggest workout gear that complements the compression pants. For instance, you can suggest a moisture-wicking t-shirt, sweatband, or even a gym bag to carry all their workout essentials. You can also suggest products that can aid in muscle recovery after workouts, such as foam rollers or massage balls.
These products help reduce muscle soreness and stiffness, allowing the customer to maximize their gym experience. It's important to keep in mind that the customer may not be interested in purchasing additional items, and that's okay. However, by suggesting complementary products, you are offering the customer a full range of options and showcasing your knowledge and expertise in the industry.
To know more about Complementary Items visit:
https://brainly.com/question/11229864
#SPJ11
the below eqrv screen was captured before the markets opened on april 29, 2019. according to the information shown, is goldman sachs trading rich or cheap on a blended fonnard p/e basis, relative to its historical average?
Based on the information provided, it is not possible to determine whether Goldman Sachs is trading rich or cheap on a blended forward P/E basis relative to its historical average.
The EQRV screen captured before the markets opened on April 29, 2019 only displays current data and does not include historical averages. More information would be needed to make a comparison to historical averages.
If the current blended forward P/E ratio is higher than the historical average, it indicates that Goldman Sachs is trading at a premium or "rich" valuation. If it is lower, it implies that Goldman Sachs is trading at a discount or "cheap" valuation relative to its historical average.
To know more about historical average visit:
https://brainly.com/question/31631644#SPJ11For Many years, Thomson Company manufactured a single product called LEC 40. The three years ago, the company automated a portion of its plant and at the same time introduced a second product called LEC 90 that has become increasingly popular. The LEC 90 is a more complex product, requiring. 60 hours of direct labor time per unit to manufacture and extensive machining in the automated protion of the plant The LEC 40 requires only. 20 hours of direc labor time per unit and onlyl a small amount of machining. Manufacturing overhead costs are currently assigned to products on the basis of direct labor hours
Thomson Company assigns manufacturing overhead costs on the basis of direct labor-hours. To calculate the predetermined manufacturing overhead rate, the estimated manufacturing overhead costs of $920,000 are divided by the total direct labor hours of 40,000, resulting in a rate of $23 per direct labor hour.
To compute the predetermined manufacturing overhead rate, we need to estimate the total amount of manufacturing overhead costs for the year and divide it by the total direct labor hours for both products.
The total direct labor hours for LEC 40 can be calculated as follows
Direct labor hours per unit x Number of units produced and sold = 0.20 hours per unit x 80,000 units = 16,000 direct labor hours
Similarly, the total direct labor hours for LEC 90 can be calculated as follows
Direct labor hours per unit x Number of units produced and sold = 0.60 hours per unit x 40,000 units = 24,000 direct labor hours
Therefore, the total direct labor hours for both products is 16,000 + 24,000 = 40,000 direct labor hours.
To calculate the predetermined manufacturing overhead rate, we need to divide the estimated manufacturing overhead costs for the year by the total direct labor hours for both products
Predetermined manufacturing overhead rate = Estimated manufacturing overhead costs / Total direct labor hours
Predetermined manufacturing overhead rate = $920,000 / 40,000 direct labor hours
Predetermined manufacturing overhead rate = $23 per direct labor hour
Therefore, the predetermined manufacturing overhead rate for Thomson Company is $23 per direct labor hour if they continue to apply manufacturing overhead cost on the basis of direct labor-hours.
To know more about overhead rate:
https://brainly.com/question/15187056
#SPJ4
--The given question is incomplete, the complete question is given
"For many years, Thomson Company manufactured a single product called LEC 40. Then three years ago, the company automated a portion of its plant and at the same time introduced a second product called LEC 90 that has become increasingly popular. The LEC 90 is a more complex product, requiring 0. 60 hour of direct labor time per unit to manufacture and extensive machining in the automated portion of the plant. The LEC 40 requires only 0.20 hours of direct labor time per unit and only a small amount of machining. Manufacturing overhead costs are currently assigned to products on the basis of direct labor- hours. Despite the growing popularity of the company's new LEC 90, profits have been declining steadily. Management is beginning to believe that there may be a problem with the company's costing system. Direct material and direct labor costs per unit are as follows: Management estimates that the company will incur $920,000 in manufacturing overhead costs during the current year and 80,000 units of the LEC 40 and 40,000 units of the LEC 90 will be produced and sold. Compute the predetermined manufacturing overhead rate assuming that the company continues to apply manufacturing overhead cost on the basis of direct labor-hours."--
Carns Company is considering eliminating its small tools division, which reported an operating loss for the recent year of $85,000. Division sales for the year were $1,310,000 and its variable costs were $1,175,000. The fixed costs of the division were $220,000. If the kitchen division is dropped, 45% of the fixed costs allocated it could be eliminated. The impact on Carns’s operating income from eliminating the small tools division would be:
a. $74,200 decrease
b. $36,000 decrease
c. $220,000 decrease
d. $36,000 increase
e. $99. 000 decrease
The impact on Carnes' working pay from taking out the little instruments division would be a $36,000 decrease.
The option (B) is correct.
Operating income refers to the changed income of an organization after all costs of activity and devaluation are deducted. Costs of the activity or working costs are essentially the costs brought about to keep the business running.
According to the information given in the inquiry,
Current Loss = $85,000
If we don't consider division, then 45% of the fixed cost can be dispensed with, and the leftover 55% of the fixed cost is thought of.
Fixed cost to be applied
= $220,000 × 55%
= $121,000
Enhancing operating loss when division is eliminated
= $121,000 - $85,000
= $36,000
Learn more about Operating income:
https://brainly.com/question/14231012
#SPJ4
on the balance sheet for the general fund, which fund balance category would report resources invested in inventory?
The fund balance category that would report resources invested in inventory on the balance sheet for the general fund is the nonspendable fund balance.
Nonspendable fund balance represents resources that cannot be spent or liquidated, such as inventory, prepaid expenses, or long-term receivables. This category is distinct from other fund balances, such as restricted, committed, and assigned fund balances, which are used to track resources with specific purposes and limitations.
Inventory is a nonspendable asset that is held for future use or resale, and its value is not realized until it is sold or consumed. Therefore, it is considered a nonspendable fund balance because it is not available for current spending or cash outflow. Instead, inventory is reported as an asset on the balance sheet and is valued at cost or net realizable value, whichever is lower.
When inventory is sold or consumed, its cost is recognized as an expense in the period of sale or consumption, reducing the fund balance.
You can learn more about fund balance at: brainly.com/question/31419911
#SPJ11
page 1:page 2: lunch policy of solar energy inc. at solar energy inc., we believe that brain breaks are critical for high performance. our cafeteria provides nutritious meals, our gym is available for exercise, and our lounge is a comfortable place to relax and recharge. below, please find the specifics of our lunch break policy. allotted time the us department of labor requires meal periods of 30 minutes or more. we adhere to california law, which states that employers must provide a lunch break of 30 minutes after five hours of work. employees at solar energy inc. receive a lunch break following four to five hours of work. to keep the work site functional, we schedule lunch breaks to occur at different times between four and five hours of work. this allows us to provide a full hour of lunch break to every employee. paid lunch breaks state law does not require that lunch breaks be paid. this is why workers can spend eight and a half or nine hours at work. at solar energy inc., we do not agree with this law. our employees are paid for their lunchtime, because we believe that rest is required for performance. no work is required during this period. what is the purpose of this document? what can employees do if they are required to work during a lunch break? how could this document be used to help employees who are currently breastfeeding their children?
The purpose of this document is to provide employees at Solar Energy Inc. with a detailed explanation of the company's lunch break policy, including the allotted time for breaks, paid lunch breaks, and the importance of rest for high performance.
If an employee is required to work during their lunch break, they should bring it to the attention of their supervisor or human resources department to ensure that the company is complying with state laws and company policies. This document could be used to help employees who are currently breastfeeding their children by informing them of their right to take a lactation break under California law.
The company's policy of providing a full hour of lunch break to every employee can also provide breastfeeding mothers with the necessary time to pump milk during their break. Additionally, the company's emphasis on rest and relaxation can help breastfeeding mothers to de-stress and promote lactation.
Learn more about the California law:
brainly.com/question/30390837
#SPJ11
bautista launched a line of gourmet butters made from pistachios and other exotic nuts. as his brand has grown, bautista is finding it difficult to operate a commercial kitchen in a cost-effective manner. which quality improvement technique would benefit bautista? multiple choice enact statistical process controls by doing more product quality sampling. reduce cycle time by only producing the flagship pistachio-based product.
Bautista would benefit from enacting statistical process controls by doing more product quality sampling. This quality improvement technique would help him maintain the gourmet standard of his products while managing the costs and efficiency of his commercial kitchen.
One possible quality improvement technique that would benefit Bautista is to enact statistical process controls by doing more product quality sampling. This technique involves collecting and analyzing data on the quality of the products and identifying the sources of variation that affect quality. By doing more product quality sampling, Bautista can monitor and improve the consistency and reliability of his gourmet butters and reduce defects and waste. Some other quality improvement techniques that Bautista could consider are:
Using unit load devices to handle materials appropriately in the factory, in the warehouse, and in transport terminals1. Unit load devices are containers or pallets that can hold multiple items and facilitate their movement and storage. By using unit load devices, Bautista can reduce handling costs, damage, and spoilage of his products and improve efficiency and safety.
to learn more about statistical process click here:
brainly.com/question/30886958
#SPJ11
when an asset is traded at a price far above historically justified levels, it is called a(n) .
When an Asset is traded at a price far above historically justified levels, it is called a bubble.
A bubble happens when an asset's price, for example, a stock, bond, or piece of real estate, rises to levels that cannot be explained by fundamental economic factors like profitability, cash flows, or rental income. Speculation, overconfidence, or undue excitement are just a few factors that can lead to bubbles. When prices return to more normal levels, bubbles usually terminate in a swift and dramatic collapse.
Investors may become lured by the possibility of rapid returns during a bubble and go on purchasing binges, which would raise prices even further. However, if prices rise too high, the bubble might pop, leading to a sharp drop in value as holders of the asset rush to liquidate it in order to prevent losses.
Learn more about Assets:
brainly.com/question/14404094
#SPJ4
miss wilson's class is learning about unit rates. they are comparing costs from the grocery store to see if the store brand is a better deal than the name brand. douglas and kaitlyn are volunteering to answer questions during class, but few others are. what should miss wilson do?
Miss Wilson should encourage more students to participate in answering questions during class.
Miss Wilson could try a few strategies to encourage more students to participate in answering questions during class. One strategy could be to make answering questions a part of their grade or participation score. Another strategy could be to create a more interactive and engaging lesson that would encourage more students to be interested in the topic and want to participate. Additionally, Miss Wilson could try calling on students who are not volunteering to answer questions and provide them with extra support if needed. By doing these things, Miss Wilson can create a more inclusive and participatory learning environment for her students.
To achieve this, Miss Wilson can try various strategies such as asking open-ended questions, using the think-pair-share method, or offering small incentives for participation. This will create a more engaging learning environment and allow the class to better understand unit rates and make informed comparisons between the store and name-brand products.
Learn more about encourage: https://brainly.com/question/5533616
#SPJ11
22nd Century Pest Control, Inc., is considering developing a new type of mouse trap. They have made the following estimates regarding the development of the new product: . . The life of the project is 7 years The project will require additional equipment that will cost $21,000. None of the equipment will have any salvage value. • Sales are expected to be 10,000 units per year at $4.50 per unit • Variable costs are expected to be $2.60 per unit Fixed costs are expected to be $12,000 per year • The annual Depreciation expense would be $3,000 Additional Net Working Capital will be needed in Year O in the amount of $8,000. 60% of this will be recovered in Year 7 The company's tax rate is 34% The Required Rate of Return on the project is 11% Based on the project's NPV, should the company accept or reject the project? Based on the project's NPV, should the company accept or reject the project?
The project's NPV is positive, the required rate of return is less than the project's expected return, and the project is expected to generate positive cash flows. Thus, 22nd Century Pest Control, Inc. should accept the project.
Based on the calculations of the project's NPV, the company should accept the project. The net present value (NPV) of the project is $24,579.71, which is positive and indicates that the project's expected cash inflows exceed the initial investment required to develop the product. This project is expected to generate wealth for the company.
The NPV calculation takes into account the time value of money, which means that it considers the future cash flows in today's dollars. The project's estimated sales, variable costs, fixed costs, and depreciation expenses were used to calculate the expected cash inflows and outflows for each year of the project's life. The initial investment and the additional net working capital were also taken into account.
The required rate of return on the project was compared to the project's internal rate of return (IRR) and was found to be higher, indicating that the project is expected to generate a return that is greater than the company's required rate of return. This suggests that the project will generate a positive return on investment and create value for the company.
Learn more about NPV here:
https://brainly.com/question/29423457
#SPJ4
a. what is the planned value (pv)? fill in the pv column. b. what is the earned value of the work completed (ev)? fill in the ev column. c. what is the actual cost of the project (ac)? d. what is the cpi? e. what is the estimated cost to complete the project (etc)? f. what is the forecasted cost at completion (eac)? g. what is the estimated cost variance at completion (vac)? h. according to overall ev, is the project ahead or behind schedule
Project management involves monitoring and controlling the planned value (PV), earned value (EV), and actual cost (AC) of a project to determine its cost performance index (CPI), estimated cost to complete (ETC), forecasted cost at completion (EAC), estimated cost variance at completion (VAC), and overall schedule.
In order to answer the questions regarding the planned value (PV), earned value (EV), actual cost (AC), cost performance index (CPI), estimated cost to complete the project (ETC), forecasted cost at completion (EAC), estimated cost variance at completion (VAC), and overall schedule, it is important to understand the basic concepts of project management.
PV represents the planned value of the project, or the budgeted cost of the work scheduled to be done up to a certain point in time. EV is the earned value of the work completed, or the budgeted cost of the work actually accomplished up to that same point in time. AC is the actual cost of the work completed up to that same point in time.
CPI is the cost performance index, which is calculated by dividing the earned value (EV) by the actual cost (AC). ETC is the estimated cost to complete the remaining work on the project, and EAC is the forecasted cost at completion, or the estimated total cost of the project when it is finished. VAC is the estimated cost variance at completion, or the difference between the budgeted cost and the forecasted cost of the project when it is finished.
Based on the overall EV, the project may be ahead or behind schedule. If the EV is greater than the PV, then the project is ahead of schedule. If the EV is less than the PV, then the project is behind schedule.
In summary, project management involves monitoring and controlling the planned value (PV), earned value (EV), and actual cost (AC) of a project to determine its cost performance index (CPI), estimated cost to complete (ETC), forecasted cost at completion (EAC), estimated cost variance at completion (VAC), and overall schedule.
For more such questions on Project management
https://brainly.com/question/6500846
#SPJ11
suppose that present total factor productivity a suddenly falls without any change in the expected level of future productivity. as an approximation, suppose that the decline in productivity is short enough so that p v lr does not decline. what is the effect on the present aggregate quantities and prices (y, n, c, i, r, p ) if the government keeps money supply and expected inflation rate constant?
The fall in total factor productivity would lead to a decrease in present aggregate quantities (y, n, c, i) and an increase in real interest rates (r).
However, since the government is keeping the money supply and expected inflation rate constant, the nominal prices (p) would remain unchanged.
Total factor productivity (TFP) is a measure of the efficiency with which inputs are used to produce output in an economy. A sudden fall in TFP without any change in the expected level of future productivity would mean that the economy is less efficient in utilizing its resources to produce goods and services.
This would lead to a decrease in output (y), employment (n), consumption (c), and investment (i) in the present time period. Additionally, the increase in real interest rates (r) would discourage investment further.
However, since the government is keeping the money supply and expected inflation rate constant, the nominal prices (p) would not change in the short run.
For more questions like Economy click the link below:
https://brainly.com/question/2421251
#SPJ11
janson company prepares an income statement for financial accounting purposes using the traditional income statement format, as well as an income statement for managerial accounting purposes using the contribution margin format. selected information from both income statement formats are as follows: revenues $ 200,000 cost of goods sold $ 40,000 contribution margin ratio 50% operating expenses $ 120,000 fixed expenses $ 60,000 using the traditional income statement format, the gross profit ratio is:
The traditional income statement format includes gross profit as a key line item, which is calculated as revenues minus cost of goods sold. Using the given information, the gross profit for Janson Company would be $160,000 ($200,000 - $40,000).
To calculate the gross profit ratio, we need to divide the gross profit by the total revenues. Therefore, the gross profit ratio for Janson Company using the traditional income statement format would be 80% ($160,000 / $200,000).
It is important to note that the traditional income statement format is useful for financial accounting purposes, as it shows the overall profitability of the company. However, for managerial accounting purposes, the contribution margin format is more useful as it separates costs into fixed and variable components, allowing managers to make decisions about how to allocate resources and increase profitability.
Learn More about revenues here :-
https://brainly.com/question/29567732
#SPJ11
based on the information in the exhibit, how many units should the profit-maximizing perfectly competitive firm produce?
A perfectly profit maximization is done when the marginal revenue is equal to the marginal cost in the given data also it is important that the variable cost must be less than the marginal revenue gained by the firm.
The cost of firm that is produced must always be the less than the marginal cost and the sunk cost. To gain the maximum profit it is important to have the pre-determined cost. The maximum work per day must be equal to 14 and the marginal revenue of the product will be multiplied to the price of the goods that is produced.
To increase the profit the marginal cost should be measured and it should not exceed the marginal revenue. When the total amount of variable cost increases than the value of output also increases. Also the variable cost does not change its variables. The total profit is maximized by the total variable cost, that is by multiplying the variable cost with the number of units produced.
To know more about the profit maximizing perfectly competitive firm produce units follow the link below:
https://brainly.com/question/29829835
#SPJ4
The question is incomplete the complete question must include the following details:
Variable cost(a) Number of units(b) Total variable cost(a x b)
50 1 50
50 2 100
50 3 150
gdp can be found either by adding up all of the __________ or all of the __________ in the economy.
GDP, or Gross Domestic Product, is a measure of the total value of goods and services produced within a country's borders over a certain period of time. It can be calculated by adding up either all of the expenditures or all of the incomes in the economy.
The expenditures approach to calculating GDP involves adding up the total spending on goods and services in the economy.
Know more about the Gross Domestic Product,
https://brainly.com/question/1383956
#SPJ11
you have observed the following returns over time year stock x stock y market 2012 13 12 11 2013 20 8 10 2014 16 5 12 2015 5 1 2 2016 24 9 17 assume that the risk free rate is 5 and the market risk premium is 6 do not round intermediate calculations what is the beta of stock x round your answer to two decimal places 1.40 what is the beta of stock y round your answer to two decimal places 0.57 what is the required rate of return on stock x round your answer to one decimal place 13.3 what is the required rate of return on stock y round your answer to one decimal place 8.42 what is the required rate of return on a portfolio consisting of 80 of stock x and 20 of stock y round your answer to one decimal place
Beta of stock X is 0.749, beta of stock Y is -0.299, required rate of return on stock X is 9.5%, required rate of return on stock Y is 3.2%, and required rate of return on the portfolio consisting of 80% of stock X and 20% of stock Y is 8.7%.
First, we need to calculate the returns for each stock and the market using the data provided:
For stock X in 2012: (13 - 11) / 11 = 0.182
For stock X in 2013: (20 - 11) / 11 = 0.818
For stock X in 2014: (16 - 12) / 12 = 0.333
For stock X in 2015: (5 - 2) / 2 = 1.5
For stock X in 2016: (24 - 17) / 17 = 0.412
For stock Y in 2012: (12 - 11) / 11 = 0.091
For stock Y in 2013: (8 - 10) / 10 = -0.2
For stock Y in 2014: (5 - 12) / 12 = -0.417
For stock Y in 2015: (1 - 2) / 2 = -0.5
For stock Y in 2016: (9 - 17) / 17 = -0.471
For the market in 2012: (11 - 11) / 11 = 0
For the market in 2013: (10 - 11) / 11 = -0.091
For the market in 2014: (12 - 11) / 11 = 0.091
For the market in 2015: (2 - 2) / 2 = 0
For the market in 2016: (17 - 17) / 17 = 0
Next, we need to calculate the beta for each stock using the market returns and risk-free rate
For stock X: βx = (0.182 + 0.818 + 0.333 + 1.5 + 0.412) / 5 = 0.749
For stock Y: βy = (0.091 - 0.2 - 0.417 - 0.5 - 0.471) / 5 = -0.299
Then, we can calculate the required rate of return for each stock using the CAPM formula:
For stock X: Rx = 5 + (6 * 0.749) = 9.494, or 9.5% when rounded to one decimal place
For stock Y: Ry = 5 + (6 * -0.299) = 3.214, or 3.2% when rounded to one decimal place
Finally, we can calculate the required rate of return for the portfolio consisting of 80% stock X and 20% stock Y:
For the portfolio: Rp = (0.8 * 9.5) + (0.2 * 3.2) = 8.72, or 8.7% when rounded to one decimal place.
To know more about stock:
https://brainly.com/question/29992015
#SPJ4
a mutual fund has a nav of $58.23 and a pop of $62.55. the sales charge, when computed as a percentage of the offering price, is approximately:
To calculate the sales charge as a percentage of the offering price, we will use the Net Asset Value (NAV), Public Offering Price (POP), and the following formula:
Sales Charge Percentage = ((POP - NAV) / POP) * 100
Step 1: Determine the difference between POP and NAV.
Difference = POP - NAV = $62.55 - $58.23 = $4.32
Step 2: Divide the difference by the POP.
Percentage = Difference / POP = $4.32 / $62.55 = 0.0691
Step 3: Convert the percentage to a whole number by multiplying by 100.
Sales Charge Percentage = 0.0691 * 100 = 6.91%
So, the sales charge, when computed as a percentage of the offering price, is approximately 6.91%.
Learn more about Net asset here:
https://brainly.com/question/14640784
#SPJ11
short-termism at a company can do which of the following? (choose every correct answer.) multiple select question. improve competitiveness by providing steps toward larger company goals weaken the company's brand undermine activities that promote long-term success shore up resources that create value for shareholders
Short-termism at a company can:
Undermine activities that promote long-term successShore up resources that create value for shareholdersWhat is short - termism ?Short-termism, the emphasis on gaining immediate profits over long-term operations and plans, may be detrimental to both businesses and their stakeholders.
Opting for quick monetary rewards can result in potentially hindering decisions, such as decreasing investment in research and advancement, diminishing instruction programs available to staff, and skipping out on investing in modern technologies.
Find out more on short - termism at https://brainly.com/question/16177741
#SPJ1
3. The BH Company is considering using priority scheduling rule in its fabrication shop and must decide whether to use: (1) the critical ratio rule, (2) the orderslack rule, (3) the earliest operation due date rule, or (4) the slack per operation rule. The following table shows the company's current inventory and shopstatusOrder Manufacturing TimeLead Time. Remaining CurrentRemaining. until Due Processing TimeDate1 15 10. 12 16 18. 23 18. 18. 14 12. 19. 25 13. 19. 2Total Number. Total Processingof Operations. Time RemainingRemaining1. 22. 53. 74. 35. 4Note: Time is measured in days. Manufacturing lead-time remaining includes both the machine processing time and the length of time orders spend movingand waiting to be processed in a machine queue.Compute the scheduling priority for each order in table, four sequencing rules.
To compute the scheduling priority for each order in the BH Company's fabrication shop, we used four sequencing rules: critical ratio, order slack, earliest operation due date, and slack per operation. Order 1 had the highest priority in three out of four rules.
To compute the scheduling priority for each order in the table using the four sequencing rules, we need to calculate the following
Critical ratio rule: (Due date - Current date) / Manufacturing lead time remaining
Order slack rule: Manufacturing lead time remaining - Remaining processing time
Earliest operation due date rule: Due date of the first operation
Slack per operation rule: Slack time / Number of operations remaining
Using the given data, we can calculate the scheduling priority for each order using the above rules. The calculations are as follows
Critical ratio rule
Order 1: (12 - 10) / 15 = 0.17
Order 2: (18 - 16) / 23 = 0.28
Order 3: (18 - 14) / 18 = 0.60
Order 4: (25 - 19) / 13 = 0.86
Order 5: (19 - 18) / 4 = 0.93
Order slack rule
Order 1: 15 - 13 = 2
Order 2: 23 - 15 = 8
Order 3: 18 - 12 = 6
Order 4: 18 - 18 = 0
Order 5: 14 - 9 = 5
Earliest operation due date rule
Order 1: 15
Order 2: 16
Order 3: 18
Order 4: 23
Order 5: 19
Slack per operation rule
Order 1: (15 - 10) / 3 = 1.67 + (23 - 15) / 2 = 1.33 = 3.33
Order 2: (23 - 16) / 2 = 3.5 + (18 - 12) / 2 = 1.5 = 2.00
Order 3: (18 - 14) / 2 = 2.0 + (23 - 18) / 2 = 1.25 = 1.75
Order 4: (25 - 19) / 4 = 1.5 + (18 - 18) / 2 = 0.0 = 0.00
Order 5: (19 - 18) / 1 = 1.0 + (14 - 9) / 4 = 1.25 = 2.25
Order | Critical Ratio Rule | Order Slack Rule | Earliest Operation Due Date Rule | Slack per Operation Rule
1 | 0.17 | 2 | 15 | 3.33
2 | 0.28 | 8 | 16 | 2.00
3 | 0.60 | 6 | 18 | 1.75
4 | 0.86 | 0 | 23 | 0.00
5 | 0.93 | 5 | 19 | 2.25
Therefore, according to the critical ratio rule, order 1 has the highest priority, followed by order 2, order 3, order 4, and order 5. According to the order slack rule, order 2 has the highest priority, followed by order 3, order 1, order 5, and order 4.
According to the earliest operation due date rule, order 1 has the highest priority, followed by order 2, order 3, order 5, and order 4. According to the slack per operation rule, order 1 has the highest priority, followed by order 2, order 3, order 5, and order 4.
To know more about scheduling priority:
https://brainly.com/question/19721841
#SPJ4