after albemarle's heat wave, the rest of june was cooler. in fact, at the end of the month, meteorologists reported that the average high for all 30 days in june was just $80^\circ$. what was the average high (in degrees fahrenheit) from june 11 through june 30? (enter your answer as a number without units.)

The magnitude of the minimum deceleration to avoid an accident is 2,186.5 m/s².

The minimum acceleration to avoid accident is calculated as follows;

s = ut + ¹/₂at²

where;

Substitute the given parameters and solve for the acceleration as follows;

350 = 12(0.56) +  ¹/₂(0.56²)a

350 = 6.72 + 0.157a

0.157a = 350 - 6.72

0.157a = 343.28

a = 343.28/0.157

a = 2,186.5 m/s²

Thus, the magnitude of the minimum deceleration to avoid an accident is 2,186.5 m/s².

Learn more about minimum deceleration here: https://brainly.com/question/14440398

#SPJ1

A pallet jack also known as a pallet truck, is a device used to lift and move heavy or stacked pallets.

A pallet jack, additionally called a pallet truck, pallet pump, pump truck, hand truck, scooter, canine, or jigger is a device used to lift and pass pallets. Pallet jacks are the most fundamental shape of a forklift and are meant to transport pallets within a warehouse.

A pallet jack is the most fundamental form of forklift and is intended to transport pallets in a warehouse or trailer. Pallet jacks are some of the maximum important gear located in warehouses and are used for transporting small masses for quick distances

The pallet jack has a deal with a lever. Slide the prongs into function beneath a pallet and crank the handle up and all the way down to carry the prongs off of the floor. Push or pull the pallet on your favored location and keep the lever right down to decrease the prongs returned to the ground.

Learn more about lever here brainly.com/question/416386

#SPJ4

The distance between charge 1 and 3 is equal to 20 cm and the force between charge 1 and 3 is equal to force between charge 1 and 3 that is 0.9 Newton and the force between charge 2 and 3 is equal to 1.41 Newton.

Electric charges are basic property of matter carried by some elementary particles that governs how the particles are affected by an electric or magnetic field. Electric charge, which can be positive or negative, occurs in discrete natural units and is neither created nor destroyed.

Coulomb's law states that like charges repel and opposite charges attract, with a force proportional to the product of the charges and inversely proportional to the square of the distance between them.

Given:

Magnitude on charge 1 = 4 μC

Magnitude on charge 2 = 4 μC

Magnitude on charge 3 = 1 μC

Distance between charge 1 and 2 = 32 cm

Distance of charge 3 from center of charge 1 and 2 = 12 cm

Distance between charge 1 and 3 can be find using Pythagoras theorem.

Distance between charge 1 and 3 = √(256 + 144)

Distance between charge 1 and 3 = 20cm

Similarly Distance between charge 2 and 3 = 20cm

Force between charge 1 and 3 can be found using coulomb law.

Force between charge 1 and 3 = (9 × 4 × 1)/40

Force between charge 1 and 3 = 36/40

Force between charge 1 and 3 = 0.9 Newton

Similarly using symmetry, force between charge 2 and 3 = 0.9 Newton

Force between charge 1 and 2 =(9 × 4 × 4)/102

Force between charge 1 and 2 = 1.41 newton

Therefore the distance between charge 1 and 3 is equal to 20 cm and the force between charge 1 and 3 is equal to force between charge 1 and 3 that is 0.9 Newton and the force between charge 2 and 3 is equal to 1.41 Newton.

Learn more about coulomb's law here:

https://brainly.com/question/506926

#SPJ9

By angular speed, the period of oscillation is 0.63 second.

We need to know about the angular speed of harmonic oscillation. the angular speed can be determined as

ω² = k / m

where ω is angular speed, k is spring constant,  and m is the mass.

The angular speed can be calculated by

ω = 2π/T

Hence,

ω² = k / m

(2π/T)² = k / m

where T is period.

From the question above, we know that:

m = 2 kg

k = 200 N/m

By substituting to the equation, we get

(2π/T)² = k / m

(2π/T)² = 200 / 2

(2π/T)² = 100

square root

2π/T = √100

T = 2π / √100

T = 0.63 second

Find more on angular speed at: brainly.com/question/6860269

#SPJ4

The calculated mass is 10 kg.

Mass (kg) times acceleration (m/s2) equals force (N). A constant mass item will therefore accelerate in direct proportion to the force exerted. When two objects of differing masses are subjected to the same force, the heavier object accelerates more slowly than the lighter object. Mass times acceleration, or F=m x a, equals force. This means that in order to move an object at the same speed as an object with smaller mass, a stronger force is required.

So, Mass times acceleration equals force

100=Mass×10

To calculate mass on its own, divide 100 by 10 on both sides.

Mass = 10 kg

Because this formula was developed using kg rather than another unit of mass like the slug, the mass is expressed in kg.

Learn more about mass here-

https://brainly.com/question/19694949

#SPJ9

Answer: I am assuming it is decreases

Explanation: a straight line is 180 degrees. 2 angles both add up to 180 degrees on a straight line. When one increases, the other has to decrease to keep it 180 degrees on a straight line

Answer:

down below

Explanation:

I assume you're asking about it's orbit around the sun. I believe the Earth's orbit around the sun would be shorter. If the Earth sped up, one can assume that means the days are shorter and the rate at which the Earth orbits the sun would also speed up.

This sounds like an open ended question, so I don't think there can be a wrong answer.

Hope this helps! :)

The gauge pressure at the bottom of the second cylinder is 0.10 atm.

The pressure of a system above the atmospheric pressure is known as gauge pressure, commonly referred to as overpressure. The pressure from the weight of the atmosphere is included in gauge pressure readings because gauge pressure is zero-referenced against ambient air (or atmospheric) pressure. This indicates that gauge pressure varies in response to both weather and height above sea level. Gauge pressure measurement is adequate for the majority of industrial applications because every operation in a refinery or manufacturing facility operates at the same air pressure. Absolute pressure is a measurement of pressure that is based on a reference pressure of zero or absolutely no pressure. The only place where this happens naturally is in a perfect vacuum, which can only be found in space.

To learn more about Gauge pressure, Visit:

https://brainly.com/question/20709159

#SPJ4

The control group for the Michelson-Morley experiment was Interferometer.

The Michelson Morley Experiment was one of the unsuccessful tests that proved the luminiferous ether idea did not exist.

Michelson and Morley attempted to explain how the Earth orbited the sun and how the passage of substances such as ether over the Earth's surface might cause measurable "ether wind."

They attempted to show the idea that the speed of light depends on the size of the ether wind as well as the direction of the beam in relation to it when the light is emitted from an Earthly source. It was supposed that ether was immobile.

The experiment's goal was to measure the speed of light in different directions in order to determine the speed of the ether relative to Earth, so proving its existence.

The theorized material Luminiferous Ether serves as a medium for the transmission of electromagnetic waves such as light rays and X-rays. Ether was thought to be a transmission medium for light propagation.

Learn more about the Michelson-Morley experiment here:

brainly.com/question/9820000

#SPJ1

Answer: The answer is 0.6 volts

Explanation:

As the formula of  Resistance says that

Resistance= Voltage÷ Current  

Where its going to be

Voltage= Resistance÷ Current

Resistance= 120 ohms

Current= 0.005A

If you are satisfied please leave a like

Plane used to remove the tip of your nose is known to be called option C. Frontal (front/back).

In regards to biology, If a person were to cut their nose off, it is one that is known to be called coronal.

The coronal plane is said to be a term that is often referred to as the frontal plane and it is seen as any vertical plane that shares the body into ventral as well as dorsal (belly and back) parts.

Therefore one can say that the coronal Plane (Frontal plane) used to remove the tip of your nose.

Learn more about coronal plane from

https://brainly.com/question/2090020
#SPJ1

We are given distance of the center of the source for two waves:

[tex]D_{1} =240 cm[/tex]

[tex]D_{2} =60 cm[/tex]

C) Calculating how their phases compares:

ΔФ240[tex]=\frac{D_{2} }{D_{1} } .[/tex]ΔФ60

[tex]\frac{240}{60} .[/tex]ΔФ60 = 4.ΔФ60

How can you determine a wave's phase?

Phase: The "Phase" of a waveform refers to the location of the moving particle and is expressed in "Radians or degrees."

Phase difference, also known as "Phase angle," is the amount of time that one wave precedes or follows another.

To learn more about Phase of the wave, visit:

https://brainly.com/question/17095727

#SPJ4

The reasons are discussed below -

We have a straight current carrying wire placed in a uniform magnetic field.

We have to explain why we can't determine the direction of the magnetic force from the information given in the problem.

The force on the current carrying wire will be -

F = IBL sinθ

According to the question -

It is impossible to determine the direction of magnetic force because of the following reasons -

Firstly, the length of the wire present in the region of magnetic field is given. If we assume it to be ∞, then -

F = IB sin(θ) x ∞ = ∞ (which is not a valid result)

Secondly, Although it is mentioned that a straight current carrying wire is placed perpendicular to the uniform magnetic field, there is no mention about  the exact orientation of the magnetic field direction. For example, if we consider the wire along +x axis then perpendicular could be any of the four directions -

+k, -k, +j, -j

Hence, these are the reasons why we can't determine the direction of the magnetic force from the information given in the problem.

To solve more questions on Magnetic force on wire, visit the link below-

brainly.com/question/13103888

#SPJ4

Answer:

84.83 ft/s^2 or 85 ft/s^2

Explanation:

A = Δ v Δ t

Acceleration is the rate of change of an objects speed; in other words, it's how fast velocity changes. According to Newton's second law, acceleration is directly proportional to the summation of all forces that act on an object and inversely proportional to its mass. It's all common sense - if several different forces are pushing an object, you need to work out what they add up to (they may be working in different directions), and then divide the resulting net force by your object's mass.

This acceleration definition says that acceleration and force are, in fact, the same thing. When the force changes, acceleration changes too, but the magnitude of its change depends on the mass of an object. This is not true in a situation when the mass also changes, e.g., in rocket thrust, where burnt propellants exit from the rocket's nozzle.

In the 17th century, Sir Isaac Newton, one of the most influential scientists of all time, published his famous book Principia. In it, he formulated the law of universal gravitation which states that any two objects with mass will attract each other with a force exponentially dependent on distance between these objects (specifically, it is inversely proportional to the distance squared). The heavier the objects are, the greater is gravitational force. It explains, for example, why planets orbit around the very dense Sun.

In Principia, Newton also includes three laws of motion which are central to understanding the physics of our world. The acceleration calculator is based on three various acceleration equations, where the third is derived from Newton's work:

a = (v_f - v_i) / Δt,

a = 2 * (Δd - v_i * Δt) / Δt²,

a = F / m,

where:

a is the acceleration,

v_i and v_f are respectively the initial and final velocities,

Δt is the acceleration time,

Δd is the distance traveled during acceleration,

F is the net force acting on an object that accelerates,

m is the mass of this object.

If you already know how to calculate acceleration let's focus on the units of acceleration. You can derive them from the equations we listed above. All you need to know is that speed is expressed in feet per second (imperial/US system) or in meters per second (SI system) and time in seconds. Therefore, if you divide speed by time (as we do in the first acceleration formula), you'll get acceleration unit ft/s² or m/s² depending on which system you use.

Alternatively, you can use the third equation. In this case, you need to divide force (poundals in US and newtons in SI) by mass (pounds in US and kilograms in SI) obtaining pdl/lb or N/kg. They both represent the same thing, as poundal is pdl = lb * ft/s² and the newton is N = kg * m/s². When you substitute it and reduce the units, you'll get (lb * ft/s²) / lb = ft/s² or (kg * m/s²) / kg = m/s².

There is also a third option that is, in fact, widely used. You can express acceleration by standard acceleration, due to gravity near the surface of the Earth which is defined as g = 31.17405 ft/s² = 9.80665 m/s². For example, if you say that an elevator is moving upwards with the acceleration of 0.2g, it means that it accelerates with about 6.2 ft/s² or 2 m/s² (i.e., 0.2*g).

Light source will pass through and form a shadow, when I hold the largest cardboard between the light source and the wall. Since, the cardboard is not so thick it will allow rays to pass through it.

Light rays always travel in a straight line. A shadow is formed when the light rays hit an opaque object. Sun is a natural source of light. The rays from the sun fall on objects on earth and forms shadows. Light rays do not interfere with each other if they come cross each other. Light rays travel from the direction of source to the direction of eye. They show property of reflection wherein after colliding a surface they trace their path back.

To know more about Shadows:

brainly.com/question/24806314

#SPJ4

Using Stefan's equation, which states that the power of the emitted radiation will be proportional to the fourth power of the absolute temperature, we treat the filament of the evacuated light bulb as a black body.

P = σ AeT⁴

Where A is the surface area of the emitter, σ is Stefan's constant, and e is the emissivity of the surface.

Now, from Stefan's Law, the radiated power is proportional to the fourth power of temperature.

P =IV

IV ∝ T⁴

Therefore,

I₁ V₁ / (I₂ V₂) = (T₁ / T₂)⁴

T₁ / T₂ = (I₁ V₁ / I₂ V₂)^{1/4}

T₂ = T₂ [ (I₁ V₁ / I₂ V₂)^{1/4} ]

Now we have,

I₂ = 2I₁ and

V₂ = 8V₁

Therefore,

T₂ = T₁ [ (2I₁ )(8V₁)/(I₁ V₁) ]^{1/4}

T₂ = T₁ (16)^{1/4}

T₂ = 2T₁

The correct option is (d).

Learn more about Stefan's Law here:

https://brainly.com/question/13170634

#SPJ4

The efficiency of moving the box is 60%.

Given in the question

Force exerted by peter = 500 N

Force due to friction on box = 200 N

Distance Traveled by box = 3 meters

Now work done by the force is given by

Work Done = (Magnitude of Force) × (Distance traveled)

Let us find work done by each force,

Work done by peter

Work Done = (Magnitude of Force) × (Distance traveled)

Put in the value, we get

Work Done =500 × 3

Work Done by peter = 1500 J

Similarly, Work done by friction

Work Done = (Magnitude of Force) × (Distance traveled)

Put in the value, we get

Work Done =200 × 3

Work Done by Friction = 600 J

As we know the work done by friction force is always negative,

Work Done by Friction = -600 J

So, net Work done = Work Done by peter + Work Done by Friction

net Work done = 1500 - 600

Net Work done = 900 J

Now Efficiency = (Net work done/work done by peter) × 100

Put in the values, we get

Efficiency = (900/1500) × 100

Efficiency = (3/5) × 100

Efficiency = 300/5

Efficiency = 60 %

So, the efficiency of moving the box is 60%.

LEARN MORE ABOUT WORK AND ENERGY HERE:

https://brainly.com/question/25959744

#SPJ9

Kinetic energy is K = 1.82 × 10⁻³ eV.

⁵⁷Fe nucleus emits 14 keV photons at rest.

We have, Mc² = 8.6 × 10⁻⁹ J in the final state of the nucleus.

Let p(nucleus) be the moment of the nucleus and p(photon) be the momentum of the photon.

Then, by conservation of momentum since the total moment is zero.

p(nucleus) = p(photon) = E(γ) / c = 140 keV / c

The energy for the recoiling nucleus is given as:

E² = p²c² + (mc²)²

Now, Mc² = 8.60 × 10⁻⁹J =5.38 × 10¹⁰ eV = 5.38  × 10⁷ keV

Therefore,

(Mc² + K²) ² = (14 keV)² + (Mc²)²

(1 + K²/Mc²)² =(14/Mc²)² +1

The term (1 + K²/Mc²)² is less than 1  therefore, (14/Mc²)² + 1 is equal to 1 by clacualtor.

Now using binomial theorem,

(1 + K²/Mc²)² = √[1 + ((14/Mc²)²] = 1 + (1/2)(14/Mc²)²

K = 1.82 × 10⁻³ eV

Learn more about kinetic energy here:

brainly.com/question/114210

#SPJ4

The fuel required to gain minimum energy is (3.02 x 10²³ / ΔH) kg.

We need to know about relativistic energy to solve this problem. The rest energy of the object can be determined by

Eo = m₀ . c²

where Eo is rest energy, m₀ is rest mass and c is the speed of light (3 x 10⁸ m/s).

The total energy of object can be described as

E = Eo / √(1 - v²/c²)

where E is total energy, v is the object speed.

From the question above, we know that :

m₀ = 2.4 x 10⁶ kg

c = 3 x 10⁸ m/s

v = 0.7c

Find the rest energy

Eo = m₀ . c²

Eo = 2.4 x 10⁶ . (3 x 10⁸)²

Eo = 2.16 x 10²³ joule

Determine the total energy

E = Eo / √(1 - v²/c²)

E = 2.16 x 10²³ / √(1 - (0.7c)²/c²)

E = 2.16 x 10²³ / 0.71

E = 3.02 x 10²³ joule

Assume that the Heat of Combustion for Space fuel = ΔH J/kg

m = E / ΔH

m = 3.02 x 10²³ /  ΔH kg

Find more on relativistic energy at: https://brainly.com/question/23920189

#SPJ4

The force per unit length exerted by I₁ on I₂ is [tex]8\times10^-^5 \ N/m[/tex] .

It is given that two long, parallel conductors, separated by 10.0cm having current  I₁ = 5.00A and  I₂ = 8.00 A.

If the current flowing through the wire are in same direction then they the wire attract each other and if the current flowing through the wire are opposite in direction then they the wire repel each other

Putting r = 10.0cm [tex]=10\times10^{-2}m[/tex] ,  I₁ = 5.00A and  I₂ = 8.00 A in equation (1) , we get

[tex]f=\frac{4\pi \times10^-^7\times5.00\times8.00}{2\times\pi\times10.00\times10^{-2}}\\\\f=\frac{2\times40\times10^-^5}{10} \\\\f=8\times10^{-5}N/m[/tex]

Learn more about force per unit length here :

https://brainly.com/question/15071504

#SPJ4

The ball that is projected 125 meters straight upward has a total time in the air of: 10.1 s

The formulas for the vertical launch upward and the procedures we will use are:

Where:

Information about the problem:

Applying the maximum height formula and clearing the initial velocity we get:

y max = v₀²/(2*g)

v₀ = √(y max * (2*g))

v₀ = √( 125 m * (2 * 9.8 m/s²))

v₀ = √( 125 m * 19.6 m/s²)

v₀ = √2450 m²/s²

v₀ = 49.497 m/s

Applying the maximum time formula we get:

t max= v₀ / g

t max= 49.497 m/s / 9.8 m/s²

t max = 5.050 s

Applying  the time of flight formula, we get:

t(of) =2 * t max

t(of) =2 * 5.050 s

t(of) = 10.1 s

In physics vertical launch upwards is the motion described by an object that has been launched vertically upwards in which the height and the effect of the earth's gravitational force on the launched object are taken into account.

Learn more about vertical launch at: brainly.com/question/13962796

#SPJ4

The time taken now is 10 s

We know that in this case, the object was projected vertically upward and we know that in this direction the acceleration due to gravity is negative. Then the ball falls straight down to  the ground. We have to use the equation of kinematics under gravity to approach the problem.

We now have that;

h = ut + 1/2gt^2

Considering the downward motion were g is positive u = 0 m/s

h =  1/2gt^2

t = 2h/g

t = √2h/g

t = √ 2 * 125/10

t = 5 s

Given that the time taken to go up is the same as the time taken to come down;

Total time spent in air = 2 (5 s) = 10 s

Learn more about kinematics:https://brainly.com/question/7590442

#SPJ1

One of the main causes of fatalities in the commercial aviation sector is loss of airplane control while in flight. There are numerous causes of upsets in airplanes, but none of them are statistically significant.

Eliminating one cause of upsets won't definitely result in fewer fatalities and accidents involving loss of control. Reducing the number of upset causes requires ongoing training. Additionally, many environmental factors that cause upsets can't always be avoided, which makes avoidance the best course of action. Therefore, in order to recover an upset airplane, pilots must possess the requisite knowledge and abilities.

All makers of big, swept-wing commercial jet aircraft use the same aerodynamic concepts.

Learn more about aerodynamic here-

https://brainly.com/question/3800219

#SPJ9

Answer:

u have to divide the 2numbers and multiply by 2

Explanation:

Answer:

The independent variable is the cause. Its value is independent of other variables in your study. The dependent variable is the effect. Its value depends on changes in the independent variable.

Explanation:

Hope this helps!

Coefficient of static friction between the car’s tires and the road is 0.3

What is static friction ?

A force that holds an object at rest is called static friction. The definition of static friction is: The resistance people feel when they attempt to move a stationary object across a surface without actually causing any relative motion between their body and the surface they are moving the object across.

Give an illustration of static friction.

When something is sitting on a surface, static friction affects it. For instance, every time you place your foot on the trail when trekking in the woods, there is static friction between your shoes and the surface.

Assume that road is level

Friction force provides centripetal force to the car

The weight of the car is = 1250 kg

speed of the car is = 25 m/s

curve radius =r= 175m

we know the formula of centripetal force is given by

[tex]f_{s} =\frac{mv^{2} }{r}[/tex]         where m = mass of the object

                                   v=  velocity

                                    r=  curve radius

and we know  the static force is given by f= μN

                                                                     here, N= mg

so now,

μmg=[tex]\frac{mv^{2} }{r}\\[/tex]

now put the all give values then we get,

[tex]$$\mu_r=\frac{v^2}{r g}=\frac{(25 \mathrm{~m} / \mathrm{sec})^2}{(175 \mathrm{~m})\left(9.8 \mathrm{~m} / \mathrm{sec}^2\right)}$$[/tex]

μ=[tex]\frac{625}{1715}[/tex]

μ= 0.3 , This is the coefficient of friction between the car tire and the rode

To learn more about static friction, Visit:  https://brainly.com/question/13754413

#SPJ4

Answer:

Touch the open ends of the two wires to each other to form a circuit and test the bulb. Touch the two open ends of the wire to each material you are testing, one at a time. If the bulb lights up, it is a good conductor. If it doesn't, it is a good insulator.How do you know if an object is a good conductor and poor conductor of electricity?

Image result for Suppose you have found a piece of material. You are not sure what the material is. You want to find out if it is a good conductor or a good insulator. Describe in words what you would do to determine if the material is an electrical conductor.​

Difference between Good Conductor and Bad Conductor of Electricity. Good conductors are those materials which allow electricity to pass through them easily. Bad conductors are those materials which do not allow electricity to pass through them easily.

A and B. The pairs that can be the components of a velocity of 30 m s¹ (east) are 20 m s' (east), 10 m s' (east) and 35 m s¹ (east), 5 m s¹ (west).

The resultant velocity of an object is the sum of its individual vector velocities.

For a resultant velocity of 30 m/s east, the component velocities that can equal the resultant velocity is calculated as follows;

35 m/s east and 5 m/s west

let the east direction be positive

let the west direction be negative

R = 35 m/s - 5 m/s

R = 30 m/s east

20 m/s east and 10 m/s east

R = 20 m/s + 10 m/s

R = 30 m/s

Thus, the pairs that can be the components of a velocity of 30 m s¹ (east) are (a) 20 m s' (east), 10 m s' (east) and (b) 35 m s¹ (east), 5 m s¹ (west).

Learn more about component velocity here: https://brainly.com/question/24681896

#SPJ1

Answer: 5.4 hours.

Explanation:

So, this would simply be divison. So, we can take 540 km, and seperate it into 500 km, and 40 km.

That being said, we can divide 500 km by 100, so we can see how many hours it takes for 500 km, which is 5.

Now, we divide 40/100, which gives us 0.4.

Add the two together, and it takes 5.4 hours to reach 540 km at a speed of 100 km/hr

The velocity in meters per second of the object at t = 2 seconds is 2.5 m/s

Velocity is simply defined as the rate of change of displacement with time. Mathematically, it can be expressed as:

Velocity = displacement / time

From the question given above, the following data were obtained:

Velocity = displacement / time

Velocity = 5 / 2

Velocity = 2.5 m/s

Thus, the velocity is 2.5 m/s

Learn more about velocity:

https://brainly.com/question/3411682

#SPJ1

Radio waves allows the charges in the receiving antenna to respond to the electric field portion of the carrier wave.

This refers to a type of disturbance which transports energy from one place to another without the actual movement of the particles and of various types such as  microwaves, radio waves etc.

The radio wave allows the electrons in the rod to vibrate with amplitudes which emulates those of the carrier wave and in this case, it is the antenna thereby resulting in the signals in the car radio being provided as a result of these type of interactions.

Read more about Radio waves here https://brainly.com/question/69373

#SPJ1