The boat will not move since the two people exchanging seats will not cause a net linear momentum on the boat.
The equation for linear momentum is P = mv, where m is the mass and v is the velocity of an object.
Since the boat is initially at rest, its linear momentum is P = 0.
Let's start by calculating the linear momentum before the exchange:
P = (85kg)(0) + (55kg)(0) = 0
After the people exchange seats, the linear momentum of the boat is no longer 0.
Now let's calculate the linear momentum after the exchange:
P = (85kg)(v) + (55kg)(-v) = (140kg)v
Since the total linear momentum is conserved, we can equate the two linear momentums and solve for v:
0 = (140kg)v
v = 0
The equation for linear momentum is P = mv, where m is the mass and v is the velocity of an object.
Therefore, the boat will not move since the velocity of the boat is 0.
This makes sense since the two people exchanging seats will not cause a net linear momentum on the boat.
To know more about linear momentum, refer here:
https://brainly.com/question/27988315
#SPJ11
can the flow near a cylindrical rod of infinite length suddenly set in motion in the axial direction be described by the method in example 4.1-l?
Yes, the flow near a cylindrical rod of infinite length can be described by the method in example 4.1-l. This example uses the method of images to calculate the velocity field of the axial flow around a cylindrical rod of infinite length.
To calculate the velocity field, we need to take the velocity potential of the image sources and double integrate it with respect to the cylindrical coordinates. This will yield the axial velocity.
The image sources are chosen such that the fluid flow is symmetric about the centerline of the rod. Therefore, when the axial flow is suddenly set in motion, the image sources also have a velocity in the axial direction. This velocity will be equal to the velocity of the original flow at the same position.
Once the velocity of the image sources is known, the velocity potential of the entire flow can be calculated. This velocity potential is then used to calculate the velocity field in the axial direction around the rod.
for such more question on cylindrical rod
https://brainly.com/question/13890719
#SPJ11
A 750-kg roller coaster car drops from rest at a height of 90.0 m along a frictionless track. If the coefficient of kinetic friction due to braking along a horizontal track at the end of the ride is 0.720, over what distance does the car need to brake to come to a complete stop?
a spring has a mass of 2kg attached to it, and the spring constant is 8n /m. the mass is set in motion from the rest position with an initial velocity of 2m/s. assuming that there is no damping, find the subsequent motion of the mass. (you do not need to use the phase shift)
The subsequent motion of the mass attached to the spring with a spring constant of 8n/m and a mass of 2kg, is an oscillatory motion with a frequency of 1 radian/s. This means that the mass will move with a sinusoidal motion between its equilibrium point and the maximum displacement of 4m. The amplitude of the motion will remain constant, and the mass will reach its equilibrium position twice in each cycle.
The motion is determined by the spring constant (k) and the mass (m). As the spring constant is high, the mass will move with a higher frequency and shorter period, and the amplitude of the oscillatory motion will be higher.
As the mass was initially set in motion with an initial velocity of 2m/s, the mass will continue to move with the same speed and the same direction until it reaches its equilibrium point. The velocity of the mass will be highest at the equilibrium point, and will decrease as it moves away from it.
The motion of the mass will be periodic and repeat itself over time, and it will not be affected by any external forces such as friction or damping. As long as the mass remains at rest at the equilibrium point, the motion of the mass will continue in the same way.
Know more about oscillatory motion here
https://brainly.com/question/29484165#
#SPJ11
what is the speed of a spacecraft moving in a circular orbit just above the lunar surface? express your answer using two significant figures.
The speed of a spacecraft moving in a circular orbit just above the lunar surface is approximately 2,300 m/s, or 2.3 km/s. To maintain a stable orbit around the Moon, the spacecraft must travel at a specific speed, called the orbital velocity, which is dependent on the radius of the orbit and the mass of the object being orbited.
Using the equations of orbital motion, we can calculate that the orbital velocity of the spacecraft is 2,299 m/s. To express this value with two significant figures, we round to 2.3 km/s.
It is important to note that the value given is only an approximation, and in reality the speed of the spacecraft can vary depending on the other objects and forces acting on it.
Know more about spacecraft here:
https://brainly.com/question/3007095
#SPJ11
. Lin cooked a pot of soup, then put half the soup in the freezer for a while. Now the soup in the pot is hot, and the soup in the freezer is cold. What is the difference between the molecules of the soup in the pot and the molecules of the soup in the freezer
Answer:
The molecules of the soup in the pot move faster than those in the freezer.
Explanation:
The soup in the freezer is closer to being a solid than that in the pot. Therefore, it has more energy which will make the molecules move faster.
an audio speaker producing a steady sound at an outdoor concert is 18 ft away from you. if you move to a position where the speaker is 78 ft distant, by what factor will the amplitude of the sound change?
The amplitude of the sound from the speaker at the outdoor concert will change by a factor of 4.2 (78 ft/18 ft) when you move from 18 ft away to 78 ft away.
This is because sound intensity decreases as the distance from the source increases, following an inverse square law. The inverse square law states that the intensity of a sound source is inversely proportional to the square of the distance from the source.
Mathematically, the formula is: I = I0 / (r^2), where I is the intensity at a distance r from the source of intensity I0. This means that when you move from 18 ft away to 78 ft away, the intensity of the sound decreases by a factor of 4.2 ((78 ft/18 ft)^2).
Therefore, the amplitude of the sound from the speaker at the outdoor concert will change by a factor of 4.2 when you move from 18 ft away to 78 ft away.
pleases can someone help me with this question
Physiological fitness, body circumference fitness and bone strength fitness comes under nonperformance-related fitness while health-related fitness and skill related fitness comes under performance-related fitness.
Physiological Fitness refers to the ability of the body to meet the demands of physical activity and exercise also includes factors such as aerobic and muscular strength, endurance, and flexibility. Skill Related Fitness refers to physical abilities that are related to performance of sports, such as agility, coordination, balance, power, speed, and reaction time. Health-Related Fitness refers to the components of physical fitness related to health, such as cardiorespiratory fitness, body composition, and muscular strength and endurance. Bone Strength Fitness refers to the strength of the bones and how well they can withstand force and protect from injury. Body Circumference Fitness refers to the circumference of the body and how well it is proportioned to support physical activities.
To learn more about fitness click here https://brainly.com/question/8860814
#SPJ1
when 115 v is applied across a wire that is 10 m long and has a 0.30 mm radius, the magnitude of the current density is 1.4 108 a/m2 . find the resistivity of the wire.
The resistivity of the wire when a voltage of 115 V is applied across a wire that is 10 m long and has a 0.30 mm radius is: [tex]2.33 x 10-15 ohm-m[/tex]
The resistivity of the wire can be determined from the magnitude of the current density. Using Ohm's law, the current density can be calculated as follows:
I = V/R
Where, I = current density (A/m2)
V = Voltage (V)
R = Resistance (ohms)
Therefore, the resistance of the wire can be determined as:
R = V/I
[tex]R = 115 V/1.4 x 108 A/m2[/tex]
[tex]R = 8.21 x 10-9 ohms[/tex]
The resistivity of the wire is equal to the resistance of the wire multiplied by the cross-sectional area of the wire, A. Since the wire has a radius of 0.30 mm, the cross-sectional area is equal to the area of a circle:
A = pi x r2
[tex]A = 3.14 x (0.30 x 10-3)2[/tex]
[tex]A = 2.83 x 10-7 m2[/tex]
Therefore, the resistivity of the wire can be determined as:
ρ = R x A
[tex]ρ = 8.21 x 10-9 x 2.83 x 10-7[/tex]
[tex]ρ = 2.33 x 10-15 ohm-m[/tex]
This is the resistivity of the wire when a voltage of 115 V is applied across a wire that is 10 m long and has a 0.30 mm radius.
To know more about magnitude refer here:
https://brainly.com/question/15681399#
#SPJ11
A typical neutron star may have a mass equal to that of the sun but a radius of only 10.0 km.
a. What is the gravitational acceleration at the surface of such a star?
b. How fast would an object be moving if it fell from rest through a distance of 1.20 m on such a star?
a.The gravitational acceleration at the surface of a neutron star is 1.32 × 10¹⁴ m/s².
b.an object would be moving at a velocity of 7.76 × 10⁶ m/s if it fell from rest through a distance of 1.20 m on such a neutron star.
a. The gravitational acceleration at the surface of a neutron star can be calculated using the formula for acceleration due to gravity:g=GM/r²
where g is the acceleration due to gravity,
G is the gravitational constant,
M is the mass of the neutron star, and r is the radius of the neutron star.
Substituting the given values,M = Mass of neutron star = Mass of Sun = 1.99 × 10³⁰ kg
r = Radius of neutron star = 10 km = 10,000 m
G = Gravitational constant = 6.67 × 10⁻¹¹ N m²/kg²
g= GM/r²= (6.67 × 10⁻¹¹ N m²/kg²) (1.99 × 10³⁰ kg) / (10,000 m)²= 1.32 × 10¹⁴ m/s²
Therefore, the gravitational acceleration at the surface of a neutron star is 1.32 × 10¹⁴ m/s².
b. The formula for velocity, v of a falling object under gravity can be given as v = √2gh
where g is the gravitational acceleration, h is the height fallen through, and v is the velocity of the object.
Substituting the given values,h = 1.20 mg = 1.32 × 10¹⁴ m/s²
v = √2gh= √(2 × 1.32 × 10¹⁴ m/s² × 1.20 m)= 7.76 × 10⁶ m/s
Therefore, an object would be moving at a velocity of 7.76 × 10⁶ m/s if it fell from rest through a distance of 1.20 m on such a neutron star.
To learn more about neutron star https://brainly.com/question/30114728
#SPJ11
a cable with 19.01 n of tension pulls straight up on a 1.79 kg block that is initially at rest. what is the block's speed after being lifted 1.62 m?
When a cable with 19.01 N of tension pulls straight up on a 1.79 kg block that is initially at rest, the block's speed after being lifted 1.62 m is 3.01 m/s.
What is tension?
Tension is the force experienced by an object that is pulled or stretched.
When a cable with 19.01 N of tension pulls straight up on a 1.79 kg block that is initially at rest, the tension in the cable balances the weight of the block, which is 1.79 kg multiplied by the acceleration due to gravity of 9.8 m/s² or 17.542 N.
So, tension = 19.01 N (since the cable tension is the only force acting on the block).
Therefore, using the work-energy theorem,
W = ∆K,
where W is the work done on the block,
∆K is the change in the block's kinetic energy,
K = 1/2 m(v²).
Since the block begins at rest, K = 0 Joules when it starts moving upward, and it has some final velocity when it reaches 1.62 m.
So, W = 1/2 m(v²).
From the given data, the work done on the block is F∆y, where F is the force on the block, and ∆y is the distance the block has been lifted up to reach 1.62 meters of height.
So,∆K = F∆y∆K
= (19.01 N)(1.62 m)∆K
= 30.8182 J
The block's kinetic energy after reaching 1.62 meters of height is the same as the work done on it since no other external forces acted on it.
Therefore,
1/2 m(v²)
= 30.8182 J1/2 (1.79 kg)(v²)
= 30.8182 Jv²
= 34.31 v = 3.01 m/s
Therefore, the block's speed after being lifted 1.62 meters is 3.01 m/s.
To know more about tension:
https://brainly.com/question/11348644
#SPJ11
how to know the minimum force a third vector should exert to bring the two other vectors to equilibrium
In order to determine the minimum force that a third vector should exert to bring two other vectors to equilibrium, we will use the concept of vector addition.
Here is some steps:
Draw two vectors (force) that are not in equilibrium, let's call them Vector A and Vector B.Draw a third vector (force) acting in the opposite direction to Vector A or Vector B.Measure the magnitude of Vector A and Vector B.To bring the two vectors to equilibrium, the third vector should have the same magnitude as Vector A + Vector B.This is because the third vector must be strong enough to cancel out the net force acting on the system. If the third vector has a magnitude less than Vector A + Vector B, then the system will not be in equilibrium.
For example, suppose Vector A has a magnitude of 5 N and Vector B has a magnitude of 3 N.
Then the minimum force that the third vector should exert to bring the two vectors to equilibrium would be
5 N + 3 N⇒8 N
To know more about the "force": https://brainly.in/question/23858054
#SPJ11
a compound machine used to raise heavy boxes consists of a ramp and a pulley. the efficiency of pulling a 100 kg box up the ramp is 50%. if the efficiency of the pulley is 90%, what is the overall efficiency of the compound machine?
The overall efficiency of the compound machine is 116.7%
Efficiency = (output work/input work) x 100%
Total output work = 500 J + 900 J = 1400 J
Total input work = 1000 J + 200 J = 1200 J
Efficiency = (output work/input work) x 100%
Efficiency = (1400 J / 1200 J) x 100%
Efficiency = 116.7%
Efficiency is a measure of how well a system or process converts energy or resources into useful output. It is usually expressed as a percentage of the input energy or resources that are effectively utilized to produce the desired output.
In thermodynamics, efficiency is often used to describe the ratio of useful work output to the total energy input in a process, such as in a heat engine. In electrical engineering, efficiency can refer to the amount of electrical power that is delivered to a load compared to the total power consumed by a system. Efficiency is an important concept in many areas of physics and engineering, as it allows us to evaluate the performance of systems and devices, and to identify areas where improvements can be made.
To learn more about Efficiency visit here:
brainly.com/question/30280642
#SPJ4
the paper dielectric in a paper-and-foil capacitor is 8.10*10^-2 mm thick. it's dielectric constant is 2.10, and it's dielectric strength is 50.0 MV/m. assume that the geometry is that of a parallel-plate capacitor, with the metal foil serving as the plates.
Part A: What area of each plate is required for for a 0.300 uF capacitor? In m^2
Part B: If the electric field in the paper is not to exceed one-half the dielectric strength, what is the maximum potential difference that can be applied across the compactor? In V
a. Part A: The area of each plate is required for for a 0.300 uF capacitor is 1.56 × [tex]10^{-4}[/tex] m².
b. Part B: If the electric field in the paper is not to exceed one-half the dielectric strength, the maximum potential difference that can be applied across the compactor is 2025 V.
To find the area of each plate required for a 0.300 uF capacitor, use the formula:
C = ε₀εrA/d
where C is the capacitance, ε₀ is the vacuum permittivity (8.85 × [tex]10^{-12}[/tex] F/m), εr is the relative permittivity (dielectric constant), A is the area, and d is the distance between the plates. In this case,
C = 0.300 uF
εr = 2.10
d = 8.10 × [tex]10^{-5}[/tex] m.
Rearrange the formula to find A:
A = Cd / (ε₀εr)
A = (0.300 × [tex]10^{-6}[/tex] F)(8.10 × [tex]10^{-5}[/tex] m) / (8.85 × [tex]10^{-12}[/tex] F/m × 2.10)
A ≈ 1.56 × [tex]10^{-4}[/tex] m²
Thus, the area of each plate required for a 0.300 uF capacitor is approximately 1.56 × [tex]10^{-4}[/tex] m².
To find the maximum potential difference that can be applied across the capacitor, use the formula:
V = Ed
where E is the electric field and d is the distance between the plates. In this case, E is half the dielectric strength (50.0 MV/m / 2 = 25.0 MV/m), and d = 8.10 × [tex]10^{-5}[/tex] m:
V = (25.0 × 10^6 V/m)(8.10 × 10^-5 m)
V ≈ 2025 V
Thus, the maximum potential difference that can be applied across the capacitor without exceeding one-half the dielectric strength is approximately 2025 V.
To learn more about potential difference, click here:https://brainly.com/question/12198573
#SPJ11
How much heat will be released when 6.44 g of sulfur reacts with excess O2 according to the following equation? 2 S + 3O2 → 2SO3 ∆H = -791.4 kJ
When 6.44 g of sulfur reacts with excess O2 according to the given equation 2 S + 3O2 → 2SO3 ∆H = -791.4 kJ, 252.7 kJ of heat will be released.
To find the amount of heat released in the given reaction, we need to find the number of moles of sulfur and then use the balanced chemical equation to find the amount of heat released.
Moles of sulfur = Mass of sulfur/Molar mass of sulfur
= 6.44 g/32.06 g/mol = 0.201 mol
From the balanced chemical equation, it is clear that 2 moles of sulfur reacts with 3 moles of O2 to produce 2 moles of SO3. In this case, we have enough O2. So, sulfur is the limiting reactant. Number of moles of sulfur = 0.201 mol, Number of moles of SO3 produced = 2 × 0.201 mol/2 = 0.201 mol.
According to the balanced chemical equation, 2 moles of SO3 is produced with the release of 791.4 kJ of heat.So, for 0.201 mol of SO3 produced, the amount of heat released = 791.4 kJ/2 mol × 0.201 mol = 79.14 kJ
Thus, the amount of heat released when 6.44 g of sulfur reacts with excess O2 is 79.14 kJ (approx).
To know more about heat click on below link:
https://brainly.com/question/27399315#
#SPJ11
The amount of heat released when 6.44 g of sulfur reacts with excess O₂ is 79.14 kJ (approx.).
When 6.44 g of sulfur reacts with excess O₂ according to the given equation 2 S + 3O₂ → 2SO₃ ∆H = -791.4 kJ, 252.7 kJ of heat will be released.
To find the amount of heat released in the given reaction, we need to find the number of moles of sulfur and then use the balanced chemical equation to find the amount of heat released.
Moles of sulfur = Mass of sulfur/Molar mass of sulfur
= 6.44 g/32.06 g/mol = 0.201 mol
From the balanced chemical equation, it is clear that 2 moles of sulfur reacts with 3 moles of O₂ to produce 2 moles of SO₃. In this case, we have enough O₂. So, sulfur is the limiting reactant. Number of moles of sulfur = 0.201 mol, Number of moles of SO₃ produced = 2 × 0.201 mol/2 = 0.201 mol.
According to the balanced chemical equation, 2 moles of SO₃ is produced with the release of 791.4 kJ of heat.So, for 0.201 mol of SO₃ produced, the amount of heat released = 791.4 kJ/2 mol × 0.201 mol = 79.14 kJ
Thus, the amount of heat released when 6.44 g of sulfur reacts with excess O₂ is 79.14 kJ (approx).
To know more about heat click on below link:
brainly.com/question/27399315
#SPJ4
how far will a rock travel if it is thrown upward at an angle of 35.00 with respect to the horizontal and with a speed of 21.3 m/s? what is the maximum range that can be achieved with the same initial speed?
The maximum range that can be achieved with the same initial speed is 69.6 m.
The distance that a rock will travel when thrown upward at an angle of 35.00 with respect to the horizontal and with a speed of 21.3 m/s is determined by the equations of projectile motion.
The maximum range that can be achieved is calculated by using the equation for the range of a projectile, which is R = (V2sin2θ)/g,
where V is the initial speed (21.3 m/s in this case), θ is the angle with respect to the horizontal (35.00 in this case), and g is the acceleration due to gravity (9.8 m/s2). The range can be calculated to be 69.6 m.
The motion of the rock can be broken down into two components:
the vertical component, which is determined by the equation h = (Vsinθ)t - ½gt2, and the horizontal component, which is determined by the equation x = Vcost.
The maximum height that the rock reaches is calculated by substituting t = (Vsinθ)/g into the equation for the vertical component, resulting in hmax = (V2sinθ)/2g.
As the rock falls back to the ground, the time taken for it to reach the ground is calculated by substituting hmax into the equation for the vertical component, resulting in ttotal = 2(Vsinθ)/g.
The range of the projectile is then calculated by substituting ttotal into the equation for the horizontal component, resulting in the equation for the range of a projectile given above.
The distance that a rock will travel when thrown upward at an angle of 35.00 with respect to the horizontal and with a speed of 21.3 m/s is determined by the equations of projectile motion,
and the maximum range that can be achieved with the same initial speed is 69.6 m.
to know more about speed refer here:
https://brainly.com/question/28224010#
#SPJ11
What arguments did he use to prove that he was right?did be used experiments, logic, finding of other scientists or other approaches
In science, arguments to prove a hypothesis or theory can be supported by various approaches such as experiments, logic, findings of other scientists, and other approaches.
Experiments are a common method used to support arguments in science. They involve carefully designed procedures to test a hypothesis or theory and collect data that can be analyzed to support or refute the hypothesis or theory. The data collected can be used to provide evidence for the argument being made.
Logic is also used in science to support arguments. Logical reasoning involves using a set of premises or assumptions to arrive at a conclusion. Scientists often use logic to develop hypotheses and theories that can be tested through experiments or other means.
Findings of other scientists can also be used to support arguments. When multiple studies or experiments have been conducted on a particular topic, scientists may review and analyze the findings to arrive at a conclusion. The consensus among the scientific community can lend weight to an argument.
Other approaches to support arguments in science may include mathematical models, simulations, and observations. In general, scientists use a variety of approaches to support their arguments and conclusions in order to ensure that their findings are as accurate and reliable as possible.
To know more about hypothesis, visit: brainly.com/question/29519577
#SPJ4
on a day when there is no wind, you are moving toward a stationary source of sound waves. compared to what you would hear if you were not moving, the sound that you hear has
The sound that you hear has a higher frequency and a shorter wavelength.
When you move towards a stationary source of sound waves, the wavelength is shortened and the frequency is increased. This is due to the Doppler Effect, which states that a wave's frequency increases as the source and observer come closer together.
The Doppler effect is a phenomenon when there is a change in the frequency of the wave due to a displacement of the source and detector/listener.
In summary, when you move towards a stationary source of sound waves, the sound you hear has a higher frequency and a shorter wavelength.
Learn more about Doppler Effect at https://brainly.com/question/1330077
#SPJ11
a child rocks back and forth on a porch swing with an amplitude of 0.204 m and a period of 2.80 s.assuming the motion is approximately simple harmonic, find the child's maximum speed.
The child's maximum speed is 0.459 m/s
Step by step explanation:
Amplitude = 0.204 m
Period = 2.80 s
We know that the speed is maximum when the displacement is zero.
Therefore, the maximum speed is given by v max = 2πAf (where A is the amplitude and f is the frequency).
We know that
f= 1/T
⇒ f=1/2.8
⇒ f=0.357 Hz
Now, we can find the maximum speed of the child
vmax=2πAf
⇒vmax=2π × 0.204 × 0.357
⇒vmax=0.459 m/s
Therefore, the child's maximum speed is 0.459 m/s.
Learn more about the object under simple harmonic motion : 'The maximum speed of the object' https://brainly.com/question/26114128
#SPJ11
The absolute brightness of a star depends on its _____.
a. size and temperature
b. distance an temperature
c. color and temperature
d. distance and color
Option A. The absolute brightness of a star depends on its size and temperature
What is the absolute brightness of a star
The absolute brightness of a star is the amount of light it emits at a standard distance from Earth, regardless of how far away it actually is.
The size and temperature of a star are the primary factors that determine its absolute brightness. The size of the star affects the amount of light it emits, with larger stars emitting more light. The temperature of a star affects the color of the light it emits, with hotter stars emitting bluer light and cooler stars emitting redder light. Both of these factors play a significant role in determining a star's absolute brightness.
Distance and color can also affect a star's brightness, but in different ways. The distance of a star affects its apparent brightness as seen from Earth, but not its absolute brightness. The color of a star can provide information about its temperature and composition, but does not directly determine its absolute brightness.
Read more on brightness of a star here:https://brainly.com/question/14376690
#SPJ1
at a particular instant, a hot air balloon is 210 m in the air and descending at a constant speed of 3.5 m/s. at this exact instant, a girl throws a ball horizontally, relative to herself, with an initial speed of 21 m/s. when she lands, where will she find the ball? ignore air resistance. (find the distance, in meters, from the girl to the ball.)
The ball which is thrown with a speed of 21 m/s, travels a distance of 129.99 m in the horizontal direction.
Therefore, the vertical component of the ball's motion will be determined by the force of gravity and the initial vertical speed of the balloon.
We can use the following kinematic equation to determine how long it takes for the ball to fall to the ground:
h = ut + 1/2 * g * t^2
where h is the initial height of the ball (equal to the height of the balloon which is 210 m).
u is the initial velocity of the ball in the vertical direction which is 3.5 m/s.
g is the acceleration due to gravity (approximately 9.8 m/s^2),
and t is the time it takes for the ball to fall to the ground.
Plugging in the values we know, we get:
210 = 3.5 * t + 1/2 * 9.8 * t^2
4.9 t^2 + 3.5 t - 210 = 0
t = 6.19 seconds
Now we can use the time it takes for the ball to fall to the ground to determine how far it travels horizontally, given its initial horizontal velocity of 21 m/s. We can use the following equation:
d = v * t
where d is the horizontal distance traveled by the ball, v is its initial horizontal velocity, and t is the time it takes to fall to the ground (which we just calculated).
Plugging in the values we know, we get:
d = 21 * 6.19
d ≈ 129.99 meters
Therefore, the girl will find the ball approximately at a distance of 129.99 meters away from her when she lands after throwing the ball horizontally.
Learn more about the kinematic equation:
https://brainly.com/question/28712225
#SPJ11
find the equivalent capacitance of a 4.20-mf capacitor and an 8.50-mf capacitor when they are connected (a) in series and (b) in parallel
(a) The equivalent capacitance of the 4.20 µF and 8.50 µF capacitors when connected in series is approximately 4.2017 µF.
(b) The equivalent capacitance of the 4.20 µF and 8.50 µF capacitors when connected in parallel is 12.70 µF.
When two capacitors are connected in series, the equivalent capacitance is given by the formula,
1/Ceq = 1/C1 + 1/C2
where C1 and C2 are the capacitances of the two capacitors.
Substituting the given values,
1/Ceq = 1/4.20 µF + 1/8.50 µF
1/Ceq = 0.238 µF^-1
Ceq = 1 / (0.238 µF^-1)
Ceq = 4.2017 µF (rounded to four significant figures)
When two capacitors are connected in parallel, the equivalent capacitance is given by the formula,
Ceq = C1 + C2
where C1 and C2 are the capacitances of the two capacitors.
Substituting the given values,
Ceq = 4.20 µF + 8.50 µF
Ceq = 12.70 µF
To know more about capacitor, here
brainly.com/question/29311704
#SPJ4
Choose a correct short description of a real object for which this would be the correct free-body diagram (Figure 1) Check all that apply. a. An object hanging from a rope is moving up with a constant speed. b. An object hanging from a rope is moving down with a constant speed c. An object hanging from a rope is moving down with a constant acceleration d. An object hanging from a rope is moving up with a constant acceleration
The correct short description of a real object for which the given free-body diagram (Figure 1) would be applicable is:
b. An object hanging from a rope is moving down with a constant speed.
This is because the diagram shows the forces acting on an object (in this case, tension and weight) when it is in equilibrium or moving with a constant velocity. In this scenario, the object is hanging from a rope, which means that the tension force and the weight force are in balance, and the object is not accelerating. Since the object is moving down with a constant speed, the forces acting on it are balanced, and the free-body diagram in Figure 1 would be applicable.
For more questions like speed visit the link below:
https://brainly.com/question/20535180
#SPJ11
when the ball is at its lowest point, is the tension in the string greater than, less than, or equal to the ball's weight? when the ball is at its lowest point, is the tension in the string greater than, less than, or equal to the ball's weight? the tension in the string is less than the ball's weight. the tension in the string is greater than the ball's weight. the tension in the string is equal to the ball's weight. it is impossible to determine.
The ball is at its lowest point, which means that the tension in the string is greater than the ball's weight.
Tension is defined as the force in a stretched object that is pulling against the force that is causing the stretch. The magnitude of the force that is pulling on an object is the tension in the object.
The tension in a string is the force that is pulling on the string. When the string is pulled, the tension increases. The tension in a string depends on the force that is pulling on the string.
The weight of the ball is the force that is pulling on the string. When the ball is at its lowest point, the tension in the string is greater than the ball's weight.
This is because the force of gravity pulling down on the ball is greater than the tension in the string which is causing the ball to move up.
Learn more about Tension here:
https://brainly.com/question/2008782
#SPJ11
if three bulbs 30 w, 40 w, and 110 w are connected in parallel to each other and to a 120-v source, calculate the current through each bulb.
The current through each bulb when three bulbs 30 W, 40 W, and 110 W are connected in parallel to each other and to a 120 V source can be calculated by dividing the total power output of the three bulbs by the voltage supplied. The total power output of the three bulbs is 180 W (30 + 40 + 110). Therefore, the current is calculated as 1.5 A (180 W / 120 V).
The current through each bulb can also be calculated individually by dividing the power output of each bulb by the voltage supplied. For the 30 W bulb, the current is 0.25 A (30 W / 120 V). For the 40 W bulb, the current is 0.33 A (40 W / 120 V). For the 110 W bulb, the current is 0.92 A (110 W / 120 V).
To summarize, the current through each bulb when three bulbs 30 W, 40 W, and 110 W are connected in parallel to each other and to a 120 V source is 0.25 A, 0.33 A, and 0.92 A, respectively.
To know more about current refer here:
https://brainly.com/question/23323183#
#SPJ11
TRUE or FALSE – Energy can be transferred from Kinetic Energy (KE) to Potential Energy (PE) and vice versa.
True, energy can be transferred from kinetic energy (KE) to potential energy (PE) and vice versa
Can energy be transferred from Kinetic Energy (KE) to Potential Energy (PE) and vice versa?The principle of the conservation of energy states that energy cannot be created or destroyed but can only transferred or transformed from one form to another.
When an object is in motion, it has kinetic energy, and when it is at rest, it has potential energy.
When the object moves from a stationary position to a position in motion, some of its potential energy is converted into kinetic energy.
Conversely, when the object moves from a position in motion to a stationary position, some of its kinetic energy is converted into potential energy.
Hence, the statement is TRUE.
Learn about energy conservatiuon here: https://brainly.com/question/2137260
#SPJ1
during a process, if the state of the system does not change, the system energy will: multiple choice question. increase. stay the same. decrease.
During a process, if the state of the system does not change, the system energy will stay the same.
Energy is the ability of an object or system to do work on another object or system. There are different forms of energy like kinetic energy, potential energy, thermal energy, and so on. Energy can be converted from one form to another, but it cannot be created or destroyed. This is the law of conservation of energy.
If a process takes place, then the energy of the system may change. Energy can be absorbed by the system or released by the system. If the system state does not change, then there is no energy transfer involved. Therefore, the system energy will stay the same.
Learn more about law of conservation at https://brainly.com/question/166559
#SPJ11
stars that lie in different places on the main sequence of the h-r diagram differ from each other mainly by having different:
Answer: The main sequence stars lying in different places differ from each other mainly by having different luminosities and temperatures.
What is an H-R diagram?
An H-R diagram is a plot of stars' luminosity (brightness) versus their surface temperature. On the x-axis, surface temperature is represented, while on the y-axis, luminosity is represented. This plot is used to analyze the characteristics of stars and can provide information such as its temperature, radius, mass, and luminosity.
It is a useful tool for astronomers because it can identify different types of stars, including giants, supergiants, and white dwarfs. It can also be used to compare the various stages of a star's life and to predict how stars evolve over time.
Learn more about H-R diagram here:
https://brainly.com/question/20501368#
#SPJ11
To determine the location of her center of mass, a physics student lies on a lightweight plank supported by two scales 2.50m apart, as indicated in the figure . If the left scale reads 290 N, and the right scale reads 112 N. What is the student's mass and find the distance from the student's head to her center of mass.
The location of her centre of mass, a physics student lies on a lightweight plank supported by two scales 2.50m apart, as indicated in the figure. If the left scale reads 290 N and the right scale reads 112 N The student's mass is approximately 41 kg, and the distance from her head to her centre of mass is approximately 0.696 m.
To determine the student's mass, we can sum up the readings from both scales, which are measures of force (Newtons) and then convert it to mass using the gravitational acceleration (g = 9.81 m/s²).
Step 1: Calculate the total force acting on the plank:
Total Force = Force_left_scale + Force_right_scale
Total Force = 290 N + 112 N
Total Force = 402 N
Step 2: Convert the total force to mass using gravitational acceleration:
Mass = Total Force / g
Mass = 402 N / 9.81 m/s²
Mass ≈ 41 kg
Now, to find the distance from the student's head to her centre of mass, we'll use the principle of torque equilibrium.
Step 3: Set up the torque equation:
Torque_left_scale = Torque_right_scale
Force_left_scale × Distance_left_scale = Force_right_scale × Distance_right_scale
Let x be the distance from the student's head to her centre of mass. Then, the distance from the left scale to the centre of mass is x, and the distance from the right scale to the centre of mass is (2.50 - x).
Step 4: Plug in the known values and solve for x:
290 N × x = 112 N × (2.50 - x)
Step 5: Simplify the equation and solve for x:
290x = 112(2.50) - 112x
290x + 112x = 112(2.50)
402x = 280
x ≈ 0.696 m
The student's mass is approximately 41 kg, and the distance from her head to her centre of mass is approximately 0.696 m.
For more such questions on centre of mass
brainly.com/question/28021242
#SPJ11
a large piece of debris that only partially burns up in the atmosphere, leaving a fragment to hit the surface, is called a
A large piece of debris that only partially burns up in the atmosphere, leaving a fragment to hit the surface is called: a meteorite
When an asteroid or comet fragment encounters the Earth's atmosphere, it is called a meteor. A meteor is a visual phenomenon that occurs when a meteoroid enters the Earth's atmosphere at high speeds and burns up due to friction with the atmosphere.
As it enters the atmosphere, the meteor heats up and begins to glow, producing a streak of light across the sky. Most meteors burn up completely in the atmosphere, but occasionally, a large piece of debris may only partially burn up, leaving a fragment to hit the surface. This is what is referred to as a meteorite.
Meteorites are valuable to scientists because they provide important information about the origins and evolution of our solar system. They can also give insights into the conditions that existed on early Earth and provide clues to the formation of planets.
To know more about the atmosphere refer here:
https://brainly.com/question/13958926#
#SPJ11
bioelectrical impedance analysis is a commercially available method used to estimate body fat percentage. the device applies a small potential between two parts of the patient's body and measures the current that flows through. with an estimate of the resistance individually of the muscle and fat between the two points, the composition of the tissue can be estimated. assume that the muscle and fat tissue can be modeled as resistors in parallel. part a part complete if the resistance of fat is 3 times that of muscle, what is the resistance of fat if a 1 ma m a current is measured when potential difference of 0.5 v v is applied to the patient's arm?
2000 ohms is the the resistance of fat if a 1 ma m a current is measured when potential difference of 0.5 v v is applied to the patient's arm.
How to solve for the resistancewe have r = resistance of the muscle
R = fat resistance
we are given R = 3r
such that the R total would be solved using ohms law:
We would have 3r² / 4r
= 0.75r
when we use the Ohm's law we would have the follwoing calculation
0.5 = 0.001 * 0.75 r
we are to solve for the value of r
0.5 = 0.00075r
divide through by:
r = 0.5 / 0.00075
= 666.667
Remember that R = 3r
R = 3 * 666.667
R = 2000 ohms
Read more on resistance here:https://brainly.com/question/17563681
#SPJ1