acetic acid has a ka of 1.80x10-5. what is the ph of a buffer solution made from 0.150 m hc2h3o2 and 0.530 m c2h3o2 -?

To perform an experiment to determine the cause of the resting potential by adjusting the ionic concentrations, you will need to complete the following steps.

First, you should set up the appropriate apparatus for the experiment. This will include a solution chamber, an electrode, a reference electrode, and a recording device.

Second, you should prepare the solutions in the chamber, adjusting the concentrations of the various ions. You may want to begin with a balanced solution, then adjust one of the ions while keeping the others constant.

Third, you should measure the resting potential of the cell. Record the values of the resting potential as you adjust the ion concentrations.

Fourth, you should analyze the data. You can look for correlations between the resting potential and the concentration of the ions.

Finally, you should form a conclusion. From your data, you should be able to determine which ion(s) are responsible for the resting potential.

By following these steps, you can conduct an experiment to determine the cause of the resting potential by adjusting the ionic concentrations.

To know more about resting potential click on below link :

https://brainly.com/question/20277449#

#SPJ11

The overall reaction of the multistep reaction is: 2A + B → C + D

This reaction can be broken down into two individual steps. In the first step, A and B react to form an intermediate product, X. The balanced chemical equation for this step is: A + B → X. In the second step, the intermediate product X is reacted with A to form C and D. The balanced chemical equation for this step is:X + A → C + D

Combining these two equations yields the overall balanced chemical equation:

2A + B → C + D

In summary, the overall balanced chemical equation for the multistep reaction is 2A + B → C + D. This equation shows that two molecules of A and one molecule of B will combine to form one molecule of C and one molecule of D.

To know more about chemical equation click on below link :

https://brainly.com/question/19626681#

#SPJ11

Quartz is a solid in which atoms are not arranged in an orderly pattern.

The given statement is false.

Quartz is a type of mineral that is naturally occurring. It has a chemical formula of SiO2 or silicon dioxide, and its crystal structure is hexagonal or trigonal in shape. Quartz is one of the most abundant minerals on the earth's surface. It is composed of tiny particles of silicon dioxide, which have a distinctive tetrahedral arrangement.

The atoms in quartz are arranged in an orderly pattern, which makes it a crystalline solid. These orderly arrangements of atoms are what give quartz its unique physical and chemical properties.Quartz is a hard, durable mineral that is used in many different industries. It is used to make glass, ceramics, electronics, and semiconductors, among other things.

For more such questions on quartz, click on:

https://brainly.com/question/30621853

#SPJ11

In terms of the solubility of the pigments in the mobile phase and their interactions with the stationary phase, the retention factor is an indicator. It is a measure of how well the pigments bind to the stationary phase relative to the mobile phase.

The retention factor in chromatography refers to the distance traveled by the compound from the starting line to the solvent front divided by the distance traveled by the solvent front.

It is the ratio of the distance that the compound traveled (in a particular solvent system) to the distance traveled by the solvent. The stationary phase can either be polar or non-polar.

The higher the retention factor, the better the pigments bind to the stationary phase and the less soluble they are in the mobile phase.

To learn more about retention factors refer: https://brainly.com/question/24731831

#SPJ11

It is a good idea to include reactions that contain substrate but not enzyme in your kinetic analysis because: it provides a baseline or control for the reaction.

One of the reasons is that it provides a baseline or control for the reaction. By studying the reaction without the enzyme, one can determine how much of the reaction is due to the enzyme and how much is due to other factors.

Additionally, it can help to identify any non-specific interactions that may be occurring between the substrate and other components of the reaction. Another reason is that it can help to establish the limits of detection for the assay. This is important for ensuring that the assay is sensitive enough to detect changes in enzyme activity under various conditions.

For example, if the assay is not sensitive enough, it may not be possible to detect changes in enzyme activity due to small changes in the reaction conditions. Finally, studying reactions that contain substrate but not enzyme can help to identify any interference or background signals that may be present in the assay.

This is important for ensuring that the assay is specific to the enzyme of interest and is not measuring other unrelated activities. By including reactions that contain a substrate but not an enzyme, one can identify any background signals and subtract them from the measurement of enzyme activity to obtain a more accurate result.

To know more about enzymes refer here:

https://brainly.com/question/14953274#

#SPJ11

Oxygen and nitrogen are both nonmetals, meaning they form covalent bonds when they react.

Oxygen forms two covalent bonds with hydrogen because it has six valence electrons and needs two more electrons to complete its octet. Nitrogen has five valence electrons and needs three more electrons to complete its octet, so it forms three covalent bonds with hydrogen. The chemical formula for a water molecule is H2O, meaning that two hydrogen atoms are bonded to one oxygen atom. The chemical formula for ammonia is NH3, meaning that three hydrogen atoms are bonded to one nitrogen atom. The bond between hydrogen and oxygen is a polar covalent bond, while the bond between hydrogen and nitrogen is a non-polar covalent bond. This is due to the difference in electronegativity between oxygen and nitrogen, which causes oxygen to be more electronegative than nitrogen.

To know more about electronegativity click on below link :

https://brainly.com/question/17762711#

#SPJ11

The property that affects a substance's saturation temperature is Pressure.

Saturation temperature is the temperature at which a liquid and a gas have the same vapor pressure. The vapor pressure of a liquid is affected by temperature, and at the saturation temperature, the vapor pressure of the liquid equals the pressure of the surrounding atmosphere.

A substance's saturation temperature is influenced by several variables. Pressure is one of the variables that influences the saturation temperature of a substance. When the pressure surrounding a substance rises, its saturation temperature rises.

Read more about mass:

https://brainly.com/question/19385703

#SPJ11

Answer: It takes 92.4 s for the concentration of the reactant in the reaction to fall to one-sixteenth of its initial value.

The first-order reaction has a half-life of 23.1 s, which means that it takes 23.1 s for the concentration of the reactant to decrease to half of its initial value. Since the concentration needs to be reduced to one-sixteenth of its initial value, it will take four half-lives of the reaction, or 92.4 s in total.

This can be mathematically shown using the formula of a first-order reaction:

[A]t = [A]0 X e^(-kt)

Where:
[A]t is the concentration of the reactant at time t
[A]0 is the initial concentration of the reactant
k is the rate constant of the reaction

To calculate the time required for the concentration to fall to one-sixteenth of its initial value, the equation can be rearranged as:

t = -(1/k)ln([A]t/[A]0)

By substituting the values of the half-life, initial concentration, and the desired concentration, we can calculate the time required for the concentration of the reactant to reduce to one-sixteenth of its initial value.

Therefore, it takes 92.4 s for the concentration of the reactant in the reaction to fall to one-sixteenth of its initial value.


Learn more about concentration here:

https://brainly.com/question/10725862#


#SPJ11

The binding energy of the last neutron in silicon-30 is 2.346 × 10^-12 J.

The binding energy of a nucleus is the energy required to separate all of its constituent nucleons (protons and neutrons) from each other to an infinite distance. The binding energy per nucleon is a measure of the stability of a nucleus, with higher values indicating greater stability.

To calculate the binding energy of the last neutron in silicon-30, we need to use the atomic masses of silicon-30 and silicon-29 to determine the mass defect of silicon-30:

mass defect = (atomic mass of protons and neutrons) - (atomic mass of nucleus)

The atomic mass of silicon-30 is 29.973770 u, and the atomic mass of silicon-29 is 28.976495 u. Therefore, the mass defect of silicon-30 is:

mass defect = (30 protons + 30 neutrons) × 1.008665 u - 29.973770 u

mass defect = 0.259625 u

This means that the total binding energy of the silicon-30 nucleus is:

binding energy = mass defect × c^2

where c is the speed of light in a vacuum, which is approximately 2.998 × 10^8 m/s.

binding energy = 0.259625 u × (1.66054 × 10^-27 kg/u) × (2.998 × 10^8 m/s)^2

binding energy = 2.335 × 10^-11 J

Since we are interested in the binding energy of the last neutron in silicon-30, we need to subtract the binding energy of the silicon-29 nucleus (which has 29 neutrons) from the binding energy of the silicon-30 nucleus:

binding energy of last neutron = binding energy of silicon-30 nucleus - binding energy of silicon-29 nucleus

binding energy of last neutron = (30 nucleons × 2.335 × 10^-11 J) - (29 nucleons × 2.308 × 10^-11 J)

binding energy of last neutron = 2.346 × 10^-12 J.

Learn more about   binding energy

https://brainly.com/question/30073915

#SPJ4

The equilibrium constant for the new reaction at 752 K is approximately 0.29 and at 719 K is approximately 0.42.

Step wise explanation:

1) For the first reaction, the equilibrium constant (Kc) is given as 11.8 at 752 K for the reaction:

[tex]2NH_{3}[/tex](g) ⇌ [tex]N_{2}[/tex](g) + [tex]3H_{2}[/tex](g)

You are asked to calculate Kc for the following reaction:

[tex]1/2N_{2} + 3/2H_{2}[/tex] ⇌ [tex]NH_{3}[/tex](g)

To find Kc for the new reaction, note that it is the reverse of the original reaction with all coefficients divided by 2. To calculate the equilibrium constant for the reverse reaction, take the reciprocal of the original Kc, and then raise it to the power of the coefficients ratio (1/2):

Kc (new) =[tex]\sqrt{ (1 / Kc (original))}[/tex] = [tex]\sqrt{(1 / 11.8)}[/tex] ≈ 0.29

So, the equilibrium constant for the new reaction at 752 K is approximately 0.29.

2) For the second reaction, the equilibrium constant (Kc) is given as 5.70 at 719 K for the reaction:

[tex]2NH_{3}[/tex](g) ⇌ [tex]N_{2}[/tex](g) + [tex]3H_{2}[/tex](g)

You are asked to calculate Kc for the following reaction:

[tex]NH_{3}[/tex](g) ⇌ [tex]1/2N_{2}[/tex](g) + [tex]3/2H_{2}[/tex](g)

This new reaction is the reverse of the original reaction with all coefficients divided by 2. Similar to the first case, take the reciprocal of the original Kc and then raise it to the power of the coefficients ratio (1/2):

Kc (new) = [tex]\sqrt{(1 / Kc (original))}[/tex] = [tex]\sqrt{(1 / 5.70)}[/tex] ≈ 0.42

So, the equilibrium constant for the new reaction at 719 K is approximately 0.42.

To learn more about equilibrium constant; https://brainly.com/question/19340344

#SPJ11

8 moles of oxygen are required to completely oxidize 1.67*10-3 m glucose solution (C6H12O6) completely to CO2 and H2O.

In order to completely oxidize 1.67*10-3 m glucose solution (C6H12O6) completely to CO2 and H2O, 8 moles of oxygen are required.

The balanced equation of the reaction, which is: C6H12O6 + 6O2 ---> 6CO2 + 6H2O.

As there are 6 moles of oxygen molecules on the reactant side, 8 moles of oxygen molecules are needed to completely oxidize 1.67*10-3 m of glucose solution.

This can also be calculated by the equation n=N/V, where n is the molarity of the solution, N is the number of moles of solute and V is the volume of the solution.

Therefore, 8 moles of oxygen is equal to the molarity of the glucose solution multiplied by the volume.

The reaction between oxygen and glucose to form CO2 and H2O is an oxidation reaction. In oxidation reactions, the reactant molecules are oxidized, and as a result, oxygen is reduced.

Therefore, oxygen is needed for the oxidation of glucose molecules to occur. In other words, without the presence of oxygen, the oxidation of glucose to CO2 and H2O cannot occur.

In conclusion, 8 moles of oxygen are required to completely oxidize 1.67*10-3 m glucose solution (C6H12O6) completely to CO2 and H2O.

This can be calculated by the balanced equation of the reaction or by the equation n=N/V. This is an oxidation reaction, meaning oxygen is necessary for the oxidation of glucose molecules to occur.

to know more about oxygen refer here:

https://brainly.com/question/13370320#

#SPJ11

In the infrared spectrum of the ester you synthesized, specifically, you should look for the presence of ester functional group peaks and the absence of reactants' peaks

When looking at the infrared spectrum of the ester that you synthesized, you should specifically look for the absence of the reactants. This can be seen in the form of absorption peaks in the infrared spectrum. Any absorption peaks that are present in the spectrum indicate that the reactants are still present in the ester, while a lack of absorption peaks suggests that the reactants have been fully converted into the ester. Therefore, the absence of peaks in the infrared spectrum is a good indication that the reactants have been consumed in the reaction and the synthesis was successful.

Know more about   ester  here:

https://brainly.com/question/28118164

#SPJ11

The pH of a solution if 10 ml of a 1 M HCl solution is added to 10 ml of a 1 M NaOH solution can be calculated as follows:

First, let's find the number of moles of HCl and NaOH in the solution. Number of moles of HCl = Concentration of HCl x Volume of HClNumber of moles of HCl = 1 M x (10 ml/1000 ml)Number of moles of HCl = 0.01 molesNumber of moles of NaOH = Concentration of NaOH x Volume of NaOHNumber of moles of NaOH = 1 M x (10 ml/1000 ml)Number of moles of NaOH = 0.01 molesNext, let's find the net number of moles of H+ and OH- ions.Number of moles of H+ ions = Number of moles of NaOH - Number of moles of HCl.Number of moles of H+ ions = 0.01 - 0.01Number of moles of H+ ions = 0 molesNumber of moles of OH- ions = Number of moles of HCl - Number of moles of NaOHNumber of moles of OH- ions = 0.01 - 0.01Number of moles of OH- ions = 0 molesSince the net number of moles of H+ ions and OH- ions is zero, the solution is neutral. The pH of a neutral solution is 7. Therefore, the pH of the solution is 7.

To know more about pH  click on below link :

https://brainly.com/question/491373#

#SPJ11

After 0.100 s, the average rate of reaction over the first 100 milliseconds is 0.25 mol s^-1. if the initial concentration of n2 was 0.400 m and the concentration of n2 was 0.350 m.

The average rate of reaction over the first 100 milliseconds when the initial concentration of N2 was 0.400 M and the concentration of N2 was 0.350 M after 0.100 s can be calculated as follows:

Average rate of reaction = {N2 consumed or produced in mol} / {time in seconds}

The balanced chemical equation for the reaction is:

N2(g) + 3H2(g) → 2NH3(g)

As per the given equation, one mole of N2 reacts to produce two moles of NH3. So, the mole of N2 consumed in the reaction would be equal to half the mole of NH3 produced.

Therefore, mole of N2 consumed = (1/2) × (0.050 M) = 0.025 M

Now, the average rate of reaction can be calculated as follows:

Average rate of reaction = {N2 consumed or produced in mol} / {time in seconds}

= 0.025 mol / 0.100 s

= 0.25 mol s^-1

Therefore, the average rate of reaction over the first 100 milliseconds is 0.25 mol s^-1.

For more such questions on rate of reaction , Visit:

https://brainly.com/question/24795637

#SPJ11

b. Therapeutic. For treatment dosage therapy, the therapeutic anti-Xa level is between 0.5 and 1 units/mL. For prophylactic dosage treatment, the ideal anti-Xa level is between 0.2 and 0.4 units/ml.

The activity of heparin, including low molecular weight heparin, is measured using the anti-Xa assay. Anti Xa is an ambiguous name. Heparin activity is what the lab truly reports when it says "against Xa." Therefore, low anti-Xa correlates with lower heparin activity, whereas high Xa correlates with higher heparin activity. The medicine and the indication both affect the therapeutic anti-Xa activity. Unfractionated heparin has a different range than low molecular weight heparin. For the treatment of venous thromboembolism, a therapeutic range for unfractionated heparin is 0.35–0.7 and for low molecular weight heparin, it is 0.5–1. 10% less is the suggested goal for acute coronary syndrome.

Learn more about Therapeutic here:

https://brainly.com/question/23798561

#SPJ4

Complete Question:

A sample is sent to the laboratory for an anti-Xa assay. The result of the PTT is 65.7 seconds. The result of the anti-Xa assay is 0.9 U/mL of heparin. The patient is on Lovebox. Their anti-Xa level is:

a. subtherapeutic

b. therapeutic

c. supratherapeutic

d. prophylactic

The molarity of the K₂CO₃ solution is 2.65 m.

The molarity of an aqueous potassium carbonate solution can be calculated by using the following formula:

Molarity = moles of solute / liters of solution.

In this case, the moles of solute is 5.84 and the volume of the solution is 2.20 liters. Therefore, the molarity of the potassium carbonate solution is 5.84 moles / 2.20 liters = 2.65 m.

Molarity is an important concept in chemistry and is used to measure the concentration of a solution. Molarity is expressed in terms of moles of solute per liter of solution. In this case, the solution contains 5.84 moles of potassium carbonate per 2.20 liters of water. This makes the molarity of the solution 2.65 m.

Learn more about molarity here: https://brainly.com/question/17138838

#SPJ11

The effectiveness of a buffer solution in resisting pH changes is determined by the concentration ratio of the conjugate base and acid, as well as the buffer capacity.

A buffer is defined as a chemical substance or mixture of substances that have the ability to minimize a change in pH when an additional amount of strong acid or a strong base is added. How successful was the buffer solution in resisting pH changes when an additional amount of strong acid or a strong base was added? The effectiveness of a buffer solution in resisting pH changes is determined by the buffer capacity. A buffer has a strong ability to resist changes in pH when there is a high buffer capacity. A buffer solution is created by mixing a weak acid and its corresponding salt, or a weak base and its corresponding salt, in equal amounts. The buffer solution can effectively resist pH changes when a small amount of strong acid or strong base is added to it. When a strong acid is added to a buffer solution, the acid is neutralized by the buffer's weak base component. When a buffer solution is subjected to a strong base, it reacts with the buffer's weak acid component to produce water and the conjugate base of the buffer. The buffer capacity is a measure of the amount of acid or base that can be added to the buffer without causing a significant change in pH.

Learn more about buffers at  brainly.com/question/22821585

#SPJ11

27.7% of the compound remains after 2.96 minutes.

Decomposition is the breakdown of a molecule into smaller molecules or elements. It is the reverse of a chemical reaction. The rate of decomposition of a compound can be determined by a first-order reaction.

The first-order rate constant is a measure of how quickly a compound decomposes over time. It is represented by the letter k.

In a first-order reaction, the rate of decomposition is proportional to the concentration of the compound.

The equation is given as follows:Rate = -k[A]Where k is the rate constant, and [A] is the concentration of the compound. The negative sign represents the decrease in concentration of the compound over time.

Equation gives the following:ln[A]t = -kt + ln[A]0Where ln is the natural logarithm, [A]t is the concentration of the compound at time t, and [A]0 is the initial concentration of the compound.

Rearranging this equation gives the following:A = A0e-kttWhere A is the concentration of the compound at time t, and A0 is the initial concentration of the compound.

The percentage of the compound that remains after a given amount of time can be determined by dividing the concentration of the compound at that time by the initial concentration and multiplying by 100.

The equation is given as follows:% remaining = (A/A0) x 100

Where % remaining is the percentage of the compound that remains, A is the concentration of the compound at time t, and A0 is the initial concentration of the compound.

We can use the given data to determine the percentage of the compound that remains after 2.96 minutes. The rate constant is given as k = 0.00729 sec-1.

Therefore, the equation for the concentration of the compound at time t is:A = A0e-ktt, we get:A = A0e-0.00729(2.96 x 60)A = A0e-1.303

Therefore, the percentage of the compound that remains is:% remaining = (A/A0) x 100% remaining = (e-1.303) x 100% remaining = 27.7%Therefore, 27.7% of the compound remains after 2.96 minutes.

to know more about compound refer here:

https://brainly.com/question/13516179#

#SPJ11

A polar covalent bond is associated with unequal sharing of electrons.

A polar covalent bond is a covalent bond in which electrons are not equally shared between the bonded atoms. It is formed when two or more atoms share electrons in such a manner that the nucleus of one atom exerts a greater attraction on the electrons than the other atom.

As a result of the unequal sharing of electrons, the atoms have partial charges. In polar covalent bonds, the electrons spend more time near the atom with a stronger nucleus. As a result, one atom in a polar covalent bond becomes partially negative, and the other becomes partially positive. Polar covalent bonds can be found in a variety of compounds, including water, ammonia, and hydrogen chloride, among others.

Learn more about polar covalent bond at:

https://brainly.com/question/10166021

#SPJ11

Answer: The pH of a liquid is a measure of its acidity or alkalinity. The normal range of pH of blood is 7.35-7.45.

What is pH?

A pH of 7 is neutral, a pH of less than 7 is acidic, and a pH of greater than 7 is alkaline. The pH of a solution is calculated as the negative logarithm of the hydrogen ion concentration (pH = -log[H+]), which varies from 0 to 14.The normal range of pH of blood is 7.35-7.45, which is slightly alkaline.

Maintaining the appropriate pH level in the bloodstream is critical for the body to function properly. Blood pH can be affected by a variety of factors, including respiratory and metabolic disorders. When the pH of the blood falls below 7.35, a condition known as acidosis develops. When the pH of the blood rises above 7.45, a condition known as alkalosis develops. Both acidosis and alkalosis can have serious health consequences.


Learn more about pH level here:
https://brainly.com/question/1458045#


#SPJ11

Answer:

2020 from da 230 get it right fam

Explanation:

Answer: 100cm3 of gas at 27°c exert a pressure of 750mmHg. Calculate its pressure if it's volume is increased to 250cm3 at 127°c? In Chemistry

Explanation:

Palladium crystallizes in a face-centered cubic unit cell. Its density is 12.0 g/cm3 at 27°C. Calculate the atomic radius of Pd.

A face-centered cubic (FCC) lattice is used by Palladium. As a result, the lattice parameter of palladium is a

=(4V/√3)^(1/3) ,

where V is the atomic volume of palladium. The formula for the density of a substance is d=m/V, where d is the density, m is the mass, and V is the volume of the substance. In this situation, m = M (mass of 1 mole of palladium), which can be expressed as M= n × m, where n is the number of moles of palladium and m is the mass of one palladium atom. Therefore, the density formula becomes

d=M/V.

Palladium's atomic volume is V=(4πr^3/3) /N_a,

where Na is Avogadro's constant (6.022 × 10^23 mol^-1). The atomic radius of Pd is given by the following formula:r=(a/2) × √2The density of Pd is given by the following formula

d=M/V

The molar mass of Pd can be calculated from its atomic weight (106.42 g/mol), M=106.42 g/mol The atomic volume of Pd is given by the following formula:

V= 4r^3/3Na

Use this value of V to determine the lattice parameter a = (4V/√3)^(1/3).r = (a/2) × √2

Calculations:d = 12.0 g/cm3M = 106.42 g/mol

V = (4πr^3/3) /N_a

Let's solve for V:

V = (4πr^3/3) /N_a = (4π (162.5 × 10^-30 m)^3/3) / (6.022 × 10^23 mol^-1) = 8.927 × 10^-6 cm^3/mol

The lattice parameter can be determined now

:a = (4V/√3)^(1/3) = (4 (8.927 × 10^-6 cm^3/mol) / √3)^(1/3) = 3.891 × 10^-8 cmThe atomic radius can be determined:r = (a/2) × √2 = (3.891 × 10^-8 cm/2) × √2 = 1.096 × 10^-8 cm

The atomic radius of Pd is 1.096 × 10^-8 cm.

Learn more about face-centered cubic (FCC) lattice at  brainly.com/question/14885097

#SPJ11

Synthesis and decomposition reactions are two types of chemical reactions that involve the formation and breaking of chemical bonds between atoms and molecules.

A synthesis reaction, also known as a combination reaction, occurs when two or more reactants combine to form a single, more complex product. The general equation for a synthesis reaction is A + B → AB.

A decomposition reaction, on the other hand, is the opposite of a synthesis reaction. It occurs when a single reactant breaks down into two or more simpler products. The general equation for a decomposition reaction is AB → A + B.

Learn about decomposition reaction here https://brainly.com/question/14608831

#SPJ1

The number of molecules of propene that must be polymerized to make 3.50 g of polypropylene is 5.02 x 10²² molecules.

In order to answer this question, we must first understand the concept of a mole. A mole is a unit of measurement that is equal to 6.022 x 10^23 molecules or particles. This means that in order to calculate the number of molecules of propene required to make 3.50 g of polypropylene, we must convert the mass given (3.50 g) into moles.

We know that the molecular weight of propene is 42g/mol, so we can use the following equation to find the number of moles of propene required: 3.50 g / 42g/mol = 0.0834 mol.

Since a mole is equal to 6.022 x 10²³ molecules of propene, we can now use this equation to find the number of molecules required:

0.0834 mol x (6.022 x 10²³ molecules/mol) = 5.02 x 10²² molecules of propene.

Therefore, in order to make 3.50 g of polypropylene, 5.02 x 10²² molecules of propene must be polymerized.

To know more about propene, refer here:

https://brainly.com/question/4340058#

#SPJ11

There are 50 bananas total in the enormous bunch of bananas.

Visit for more information on a bunch of bananas.

https://brainly.com/question/28015501

#SPJ1

The ratio of [HCO₃⁻] to [HCO₂H] in an acetate buffer is 5.01.

The ratio of [HCO₃⁻] to [HCO₂H] (formic acid) in an acetate buffer at pH 4.50 is determined by the Henderson-Hasselbalch equation:

pH = pKa + log ([HCO₃⁻]/[HCO₂H]).
[HCO₃⁻]/[HCO₂H] = 10^(pH-pKa)
= 10^(4.50 - 3.80)
= 5.01


To further understand the buffering capacity of an acetate buffer, we must first understand the role of formic acid and bicarbonate in an acetate buffer.

Formic acid is an organic acid and bicarbonate is a salt of carbonic acid. Both of these species can form and break down as needed to maintain the pH of the buffer.

As the pH of the buffer is increased, the formic acid will break down, forming more bicarbonate.

On the other hand, as the pH of the buffer is decreased, more formic acid will form, resulting in fewer bicarbonate ions.

The buffering capacity of an acetate buffer is dependent on the relative concentrations of formic acid and bicarbonate ions, and these concentrations can vary depending on the pH of the buffer.

In summary, the ratio of [HCO₃⁻] to [HCO₂H] is found to be 5.01 in an acetate buffer at pH 4.50.

To know more about acetate buffer, refer here:

https://brainly.com/question/16970860#

#SPJ11

The economically recoverable form of a metal is known as ore.

Ores are generally composed of economically valuable minerals or metals that can be extracted from the surrounding rock. These minerals and metals are often referred to as "commodities" and their prices can fluctuate depending on market conditions.

In order for ore to be economically viable, it must contain a sufficient concentration of the desired metal or mineral, which makes it profitable to extract. In addition, it must also be accessible and extractable with existing technology. Some ores are more difficult to extract than others due to their physical characteristics, which can make them more costly to process.

For instance, ores that are particularly hard or dense may require additional energy to break down and process, thus driving up costs. Similarly, some metals and minerals may require more complicated extraction techniques and more resources than others.

Ore bodies can be found on the surface or beneath the earth's surface and can be mined through open-pit or underground mining.

In conclusion, the ore is the naturally occurring form of a metal that is concentrated enough to allow economical recovery of the metal. Ores vary in their concentration of minerals and metals and their extraction processes require different levels of energy, resources, and technology.

Therefore, the naturally occurring form of a metal that is concentrated enough to allow economical recovery of the metal is known as ore.

To know more about ore, refer here:

https://brainly.com/question/89259#

#SPJ11

Answer:

alpha: atomic mass = 4

beta: mass of electron; positive charge

gamma: 100 percent energy; zero mass

positron: mass <1; unstable charge (+)

beta: electron emitted from the nucleus

Note: Mesons are particles composed of a quark and an antiquark and do not fit the descriptions provided.

The partial pressure of oxygen gas in torr is 725 torr. when oxygen gas is collected over water.

oxygen gas is collected over water. the total pressure (the o2 pressure the water vapor pressure) is 748 torr. the temperature of the water is such that the water vapour pressure is 23 torr. the partial pressure of the oxygen gas in torr.

The total pressure of the mixture

(the oxygen pressure + the water vapour pressure) is 748 torr.

At a temperature at which the water vapour pressure is 23 torr.

The partial pressure of the oxygen gas in torr can be calculated as follows;

partial pressure of O2 = total pressure - vapour pressure of water

= 748 torr - 23 torr= 725 torr

Therefore, the partial pressure of the oxygen gas in torr is 725 torr.

For more such questions on partial pressure , Visit:

https://brainly.com/question/19813237

#SPJ11