The small electric devices that, like vacuum tubes, could receive and amplify radio signals were known as transistors.
Transistors revolutionized the field of electronics by replacing vacuum tubes, which were bulky, fragile, and consumed a lot of power. The invention of transistors, which was made by John Bardeen, Walter Brattain, and William Shockley at Bell Labs in 1947, paved the way for the development of smaller, more efficient electronic devices, such as radios, televisions, and computers.
Transistors are made of semiconductor materials, such as silicon or germanium, and they work by controlling the flow of electrons through a material. They have three main components: the emitter, the base, and the collector. When a small current is applied to the base of a transistor, it controls the flow of a larger current between the emitter and the collector, allowing the transistor to amplify signals.
Transistors are now found in nearly every electronic device, from smartphones and laptops to cars and medical equipment. They have enabled the development of smaller, more efficient, and more powerful devices that have transformed our daily lives.
To learn more about transistors
https://brainly.com/question/31052620
#SPJ4
A marble is thrown norizontally from a tarble top with a velocity of 1. 50m/s. The marble falls 0. 70m away from te table'ede. How high is the lab table? what is the marble's velocity just before it hits the floor
The marble's velocity just before it hits the floor is approximately 4.83 m/s.
To find the height of the lab table, we can use the following terms:
1. Horizontal velocity (Vx): 1.50 m/s
2. Horizontal distance (d): 0.70 m
First, we need to find the time it takes for the marble to fall 0.70m horizontally. We can do this using the equation: d = Vx * t
0.70 m = 1.50 m/s * t
t = 0.70 m / 1.50 m/s = 0.4667 s
Now, we can use this time to find the height (h) of the table using the vertical motion equation: h = 0.5 * g * t^2, where g is the acceleration due to gravity (9.81 m/s^2).
h = 0.5 * 9.81 m/s^2 * (0.4667 s)^2
h ≈ 1.067 m
So, the height of the lab table is approximately 1.067 meters.
To find the marble's velocity just before it hits the floor, we need to calculate its vertical velocity (Vy) using the equation: Vy = g * t
Vy = 9.81 m/s^2 * 0.4667 s
Vy ≈ 4.57 m/s
Now, we can find the marble's total velocity (V) using the Pythagorean theorem: V = √(Vx^2 + Vy^2)
V = √((1.50 m/s)^2 + (4.57 m/s)^2)
V ≈ 4.83 m/s
Therefore, the marble's velocity just before it hits the floor is approximately 4.83 m/s.
To learn more about velocity, refer below:
https://brainly.com/question/17127206
#SPJ11
What type of fit would describe the following situations. a. the cap of a ball-point pen b. the lead in a mechanical lead pencil, at the tip c. the bullet in a barrel of a gun
a. The fit between the cap and a ball-point pen can be described as a "snug" or "friction" fit, as the cap is designed to stay securely in place when not in use.
b. The fit of the lead in a mechanical pencil at the tip can be described as a "precision" fit, as the lead needs to be held firmly and accurately within the pencil to allow for smooth and consistent writing.
c. The fit of a bullet in the barrel of a gun can be described as a "tight" or "interference" fit, as the bullet must be in close contact with the barrel to ensure accurate firing and prevent gas leakage during discharge.
Visit https://brainly.com/question/16289258 to learn more about fits
#SPJ11
An object in free fall has a velocity of 5 m/s in the upward direction. What is the instantaneous velocity of the object one second later?
An object in free fall near the Earth's surface has an acceleration due to gravity of 9.8 m/s² downward. If the object has an initial velocity of 5 m/s upward, it will continue to move upward for a while before gravity pulls it back down.
One second later, the object will have been under the influence of gravity for one more second. During this time, its upward velocity will have decreased by 9.8 m/s² due to the acceleration of gravity, making it zero at the highest point of its trajectory.
As the object continues to fall, its downward velocity will increase by 9.8 m/s every second. Therefore, one second after starting with an initial velocity of 5 m/s upward, the object will have a velocity of 5 m/s downward.
In summary, assuming the object is in free fall near the surface of the Earth, its initial velocity of 5 m/s upward will be reversed by the acceleration due to gravity, resulting in a velocity of 5 m/s downward one second later.
To know more about acceleration refer here:
https://brainly.com/question/30413854#
#SPJ11
Two objects of the same mass travel in opposite directions along a horizontal surface. Object x has a speed of 5ms and object y has a speed of 5ms, as shown in the figure. After a period of time, object x collides with object y. In scenario 1, the objects stick together after the collision. In scenario 2, the objects do not stick together after the collision
After the collision, the two objects will stick together and move with a velocity of 5ms in the same direction.
What is collision?Collision is a physical phenomenon that occurs when two or more objects interact with enough force to cause damage to one or more of the objects. This can occur when two objects come into contact with each other, or when two objects are moving at different speeds and collide with each other. Collisions can be caused by a variety of factors, including the speed and mass of the objects, the angle of their contact, and the surface area of the objects.
Scenario 1:
After the collision, the two objects will stick together and move with a velocity of 5ms in the same direction.
Scenario 2:
After the collision, the two objects will bounce off each other and move in opposite directions with the same velocity of 5ms.
To learn more about collision
https://brainly.com/question/7221794
#SPJ4
why do you think it is not wise to hit hard on someone back?
What is the frequency of red light, which has a wavelength of around 6. 35 * 10 ^ 7 - 7 m? (Remember: speed of light is 3*10^ 1 8 m/s) Be sure to show all work
To calculate the frequency of red light, we need to use the formula:
frequency = speed of light / wavelength
The speed of light is given as 3*10^18 m/s and the wavelength of red light is around 6.35*10^-7 m. Plugging these values into the formula, we get:
frequency = 3*10^18 / 6.35*10^-7
frequency = 4.72*10^14 Hz
Therefore, the frequency of red light is approximately 4.72*10^14 Hz.
Frequency is a measure of how many cycles of a wave occur in one second. In the case of light, it refers to how many times a light wave oscillates per second. Wavelength, on the other hand, refers to the distance between two consecutive peaks or troughs of a wave. It is related to frequency through the speed of light, which is a constant in vacuum.
In summary, the frequency of red light is determined by its wavelength and the speed of light. The calculation involves dividing the speed of light by the wavelength of the light. This calculation can be used to determine the frequency of any other type of light, provided its wavelength is known.
To know more about frequency refer here
https://brainly.com/question/5102661#
#SPJ11
Particles q1, 92, and q3 are in a straight line.
particles q1 = -1.60 x 10-19 c, 92 = +1.60 x 10-19 c,
and q3 = -1.60 x 10-19 c. particles 91 and q2 are
separated by 0.001 m. particles q2 and q3 are
separated by 0.001 m. what is the net force on 92?
remember: negative forces (-f) will point left
positive forces (+f) will point right
-1.60 x 10-19 c
+1.60 x 10-19
-1.60 x 10-19 c
91
+ 92
93
0.001 m
0.001 m
The net force on particle q₂ is approximately 4.60 x 10⁻¹⁴ N to the right.
To find the net force on particle q₂, we need to calculate the electric force that each of the other particles exerts on it and add them up vectorially.
The electric force between two point charges is given by Coulomb's law
F = k × q₁ × q₂ / r²
where F is the electric force in Newtons, k is Coulomb's constant (9 x 10⁹ N m² / C²), q₁ and q₂ are the magnitudes of the charges in Coulombs, and r is the distance between the charges in meters.
Let's first calculate the force that particle q₁ exerts on particle q₂. The magnitude of the electric force between them is:
F1 = k × |q₁| × |q₂| / r² = (9 x 10⁹ N m² / C²) × (1.60 x 10⁻¹⁹ C) × (1.60 x 10⁻¹⁹ C) / (0.001 m)² ≈ 2.30 x 10⁻¹⁴ N
The direction of the force is to the left, because particles q₁ and q₂ have opposite charges.
Now let's calculate the force that particle exerts on particle q₃. The magnitude of the electric force between them is the same as the magnitude of the force between particles q₁ and q₂
F2 = k × |q₂| × |q₃| / r₂ = (9 x 10⁹ N m² / C²) x (1.60 x 10⁻¹⁹ C) x (1.60 x 10⁻¹⁹ C) / (0.001 m)² ≈ 2.30 x 10⁻¹⁴ N
The direction of the force is to the right, because particles q₂ and q₃ have opposite charges.
Finally, we can calculate the net force on particle q₂ by subtracting the force to the left from the force to the right
Fnet = F2 - F1 ≈ 4.60 x 10¹⁴ N to the right
Therefore, the net force on particle q₂ is approximately 4.60 x 10⁻¹⁴ N to the right.
To learn more about net force here
https://brainly.com/question/29261584
#SPJ4
13. If PE + KE; = PE, + KE;, why do problems involving mechanical energy fail to meet his rule with an exact answer?
The reason why problems involving mechanical energy fail to meet this rule with an exact answer is because mechanical energy is not a conserved quantity in real-world situations.
The law of conservation of mechanical energy states that the total mechanical energy of a closed system, which includes both potential energy(PE) and kinetic energy(KE), remains constant as long as no external forces act on the system.
In an ideal situation, where there is no friction or other external forces acting on the system, the total mechanical energy would remain constant. However, in most real-world situations, there are always external forces present, such as air resistance or friction, that cause some of the mechanical energy to be lost or converted into other forms of energy such as heat or sound. Therefore, it is impossible to have an exact answer when dealing with mechanical energy problems in real-world situations.
To know more about mechanical energy, click here;
https://brainly.com/question/29408366
#SPJ11
What is the torque exerted by the wrench in scenario c?
What is the torque exerted by the wrench in scenario d?
If you've figured out all of the torques correctly, then you can clearly see that the scenario with the highest torque is:
The torque exerted by the wrench in scenario (c) and (d) is 'LF'. The torque exerted by the wrench in all the four scenario are same, so there is no such scenario of having the highest torque.
We know, Torque is the cross product of radius vector and force vector. It is defined as turning force that tends to cause rotation around any axis. It is also referred to as the 'Moment of Force'.
Mathematically,
Torque, ζ = r × F = r F sinθ
In case (a.),
The force vector is perpendicular to the radius vector (or the length) i.e., θ = 90°
∴ ζ = r × F = L × F = LF
In case (b.)
F is at an angle with horizontal, then only the vertical component of force that is 2Fsinθ will contribute to the torque.
∴ ζ = r × 2Fsin30° = L × 2F × (1/2) = LF
In case (c.),
The force vector is perpendicular to the radius vector i.e., θ = 90°
∴ ζ = r × F = 2L × (F/2) = LF
In case (d.),
Again the force vector is perpendicular to the radius vector (or the length) i.e., θ = 90°
∴ ζ = r × F = (L/2) × 2F = LF
Therefore, torque exerted by wrench in all scenario is same i.e., LF.
Learn more about torque here
brainly.com/question/31248352
#SPJ1
A coil with 20 turns of wire is wrapped around a tube with a cross-sectional area of 1. 0 m2. A magnetic field
is applied at a right angle at 0. 50 T. If the coil is pulled out of the magnetic field in 5 seconds, what emf is
induced in the coil?
The emf induced in the coil is 2.0 volts.
To calculate the emf induced in the coil with 20 turns of wire, wrapped around a tube with a cross-sectional area of 1.0 m², and a magnetic field applied at a right angle at 0.50 T, when it is pulled out of the magnetic field in 5 seconds, we can use Faraday's Law of Electromagnetic Induction.
The formula for Faraday's Law is:
emf = -N * (ΔΦ/Δt)
where
emf is the induced electromotive force,
N is the number of turns in the coil (20),
ΔΦ is the change in magnetic flux, and
Δt is the time it takes to change the flux (5 seconds).
First, we need to calculate the change in magnetic flux (ΔΦ). Since the coil is completely pulled out of the magnetic field, the final magnetic flux will be zero.
The initial magnetic flux (Φ_initial) can be calculated using the formula:
Φ_initial = B * A
where
B is the magnetic field strength (0.50 T) and
A is the cross-sectional area of the tube (1.0 m²).
Φ_initial = 0.50 T * 1.0 m²
= 0.50 Wb (Weber)
Now, we can calculate the change in magnetic flux (ΔΦ):
ΔΦ = Φ_final - Φ_initial
= 0 Wb - 0.50 Wb
= -0.50 Wb
Next, we can plug the values into Faraday's Law formula:
emf = -20 * (-0.50 Wb / 5 s)
= 20 * (0.10 V)
= 2.0 V
So, the emf induced in the coil is 2.0 volts.
To know more about emf induced refer here
https://brainly.com/question/16764848#
#SPJ11
A person climbs to the top of the tallest mountain in South America. Since they are farther away from the center of the Earth, how does their weight compare to what it was at the base of the mountain?
Answer:
A person's weight will be slightly less at the top of a mountain than at the base. This is because the force of gravity is slightly weaker at higher altitudes. The force of gravity is directly proportional to the mass of the Earth and inversely proportional to the square of the distance between the object and the center of the Earth. Since the person is farther away from the center of the Earth at the top of the mountain, the force of gravity is slightly weaker. This means that the person will weigh slightly less.
The amount of weight loss is very small, and it is not something that most people would notice. However, it is a real effect, and it can be measured. In fact, scientists have used this effect to measure the mass of the Earth.
Assuming the precision, P, with which this electromagnetic radiation can shape the cornea is inversely proportional to wavelength (the shorter the wavelength, the higher the precision), how much more precise can this ultraviolet light be than the shortest wavelength of visible light, which is 380 nm
From the relation between precision and wavelength, the precision of UV light is 90.95 % times the precision of visible light.
Given:
Wavelength, λ = 380 nm
Laser wavelength, λ₁ = 199 nm
The relationship between precision and wavelength is:
P ∝ 1/λ
Precision = (P - P₁)÷P₁ ×100
Precision(UV) = (λ₁ ÷ λ) - 1 ×100
Precision(UV) = (380 ÷ 199 - 1) ×100
Precision(UV) = 90.95 %
Hence, the precision of UV light is 90.95 % the precision of visible light.
To learn more about Wavelength, here:
https://brainly.com/question/31322456
#SPJ12
The microwave transmitters that we use have a frequency of about 10 ghz. What is the approximate wavelength?.
The approximate wavelength of a 10 GHz microwave transmitter is 3 centimeters.
The approximate wavelength of a microwave transmitter with a frequency of 10 GHz can be calculated using the formula:
wavelength = speed of light / frequency
where the speed of light is approximately 3.00 × 10^8 meters per second.
So, the wavelength of a 10 GHz microwave transmitter would be:
wavelength = 3.00 × 10^8 m/s / 10 × 10^9 Hz
wavelength = 0.03 meters or 3 centimeters
To know more about wavelength refer here
https://brainly.com/question/13533093#
#SPJ11
Which has the longest wavelength and, therefore, the lowest frequency/energy?.
The electromagnetic wave with the longest wavelength and lowest frequency/energy is radio waves.
The electromagnetic spectrum encompasses a range of waves with varying wavelengths and frequencies. At one end of the spectrum are radio waves, which have the longest wavelengths and lowest frequencies. As we move along the spectrum towards shorter wavelengths and higher frequencies, we encounter other types of waves such as microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays.
Radio waves are commonly used for communication, including radio broadcasting, television signals, wireless networks, and radar. They have wavelengths ranging from several millimeters to hundreds of kilometers. Due to their long wavelengths, radio waves carry less energy compared to waves with shorter wavelengths, such as visible light or X-rays.
It's important to note that even though radio waves have low energy and long wavelengths, they are still part of the electromagnetic spectrum and can be used for various practical applications in communication and technology.
To know more about electromagnetic wave refer here
https://brainly.com/question/3101711#
#SPJ11
A flashlight can be made that is powered by the induced current from a magnet moving through a coil of wire. The coil and magnet are inside a plastic tube that can be shaken causing the magnet to move back and forth through the coil. Assume the magnet has a maximum field strength of 0. 05 T.
Make reasonable assumptions and specify the size of the coil and the number of turns necessary to light a standard 1-watt, 3-V flashlight bulb
According to the question the length of the coil is (0.004719 × 1).
What is length?Length is a measurement of the distance between two points. It can refer to a physical distance, such as the length of a road or the length of a desk, or it can refer to a temporal distance, such as the length of a movie or the length of a song. Length is usually measured in units such as meters, kilometers, or feet, and can also be measured in time units such as seconds, minutes, or hours. In mathematics, length is also used to describe the size of a line, curve, or circle.
Assuming the magnetic field is uniform throughout the coil and that the current induced in the coil is directly proportional to the field strength, the number of turns in the coil can be calculated using the formula:
N = (V × B) / 4πf
Where:
N = number of turns
V = voltage of the flashlight bulb (3 V)
B = maximum field strength of the magnet (0.05 T)
f = frequency of the magnet moving through the coil (assume to be 1 Hz)
Therefore, the number of turns in the coil is:
N = (3 × 0.05) / (4π × 1) = 0.004719 turns
Assuming the coil is made from copper wire with a cross-sectional area of 1 mm2, the length of the coil is given by the formula:
L = N × A / π
Where:
L = length of the coil
N = number of turns in the coil (0.004719)
A = cross-sectional area of the wire (1 mm2)
Therefore, the length of the coil is:
L = (0.004719 × 1)
To learn more about length
https://brainly.com/question/29813582
#SPJ4
Neglecting air speed, how fast must you toss a ball straight up in order for it to take 6 seconds to return to its initial level?
The initial velocity with which the ball must be thrown upwards in order for it to take 6 seconds to return to its initial level is 29.4 meters/second.
Assuming negligible air resistance, the time taken by a ball to go up and come down after being thrown vertically upwards is given by:
t = 2*v/g
where:
t = time taken for the ball to go up and come down (in seconds)
v = initial velocity with which the ball is thrown upwards (in meters/second)
g = acceleration due to gravity
In this case, the time taken for the ball to return to its initial level is given as 6 seconds. Therefore, we can write:
6 seconds = 2*v/g
Rearranging the equation, we get:
v = (6 seconds * g)/2 = 29.4 m/s
To know more about resistance refer here
https://brainly.com/question/14327116#
#SPJ11
4. 2 Water vapour is a gas. Explain the difference and similarities between water in the vapour
form and in the liquid form in terms of the kinetic molecular theory (KMT).
The kinetic molecular theory (KMT) describes the behavior of particles in a substance.
According to KMT, particles in both water vapor and liquid water are in constant motion and have kinetic energy. However, the particles in water vapor have more kinetic energy than those in liquid water because they are at a higher temperature.
As a result, the particles in water vapor are farther apart and have a higher average speed than the particles in liquid water. Additionally, water vapor and liquid water have different arrangements of particles.
In water vapor, the particles are not closely packed and are free to move, while in liquid water, the particles are tightly packed and have less freedom of movement.
To know more about kinetic molecular theory, refer here:
https://brainly.com/question/15013597#
#SPJ11
A flute is played with a first harmonic of 196 Hz (a pitch of G3). The length of the air
column is 89. 2 cm (quite a long flute). Find the speed of the wave resonating in the
flute.
The speed of the wave resonating in the flute is approximately 349.664 m/s. To find the speed of the wave resonating in the flute, we can use the formula:
speed of wave = frequency x wavelength
We know that the frequency of the first harmonic (or fundamental frequency) of the flute is 196 Hz, which corresponds to a pitch of G3.
To find the wavelength, we need to use the formula for the wavelength of a standing wave in an air column that is open at both ends:
wavelength = 2L/n
where L is the length of the air column (in meters) and n is the harmonic number (for the first harmonic, n = 1).
In this case, we're given the length of the air column as 89.2 cm, which is 0.892 meters. So, plugging in the values, we get:
wavelength = 2 x 0.892 / 1
wavelength = 1.784 meters
Now that we have both the frequency and the wavelength, we can calculate the speed of the wave resonating in the flute:
speed of wave = frequency x wavelength
speed of wave = 196 Hz x 1.784 m
speed of wave = 349.664 m/s
So, the speed of the wave resonating in the flute is approximately 349.664 m/s.
Know more about the speed of the wave here:
https://brainly.com/question/10715783
#SPJ11
ASAP!! Can someone help me with this? I put the attachment below.
A coil set-up without an iron core, featuring thirty loops, functioned as the control in the experiments. This configuration served as a baseline to compare the outcomes all other setups contained within the experiment.
How to explain the informationIt is essential that any testing environment deploys a control to create a standard of reference when assessing alterations made to the conditions of the experiment.
The inclusion of an iron core to the coiling design led to the most significant modifications being brought about for the strength of the electromagnet. These changes were evidence by the rise in paperclips collected when inserting an iron nucleus into both the thirty-loop and sixty-loop configurations.
Learn more about coil on
https://brainly.com/question/27605406
#SPJ1
19. Evaluate the frequency of the third harmonics of a
closed pipe of length 0. 3m. [speed of sound in air = 340ms-']
(a) 1416. 7Hz (b) 850. 0Hz(c) 1511. 1 Hz(d) 283. 3 Hz
The frequency of the third harmonic is approximately 1416.7 Hz (option a).
The frequency of the third harmonics of a closed pipe can be calculated using the formula:
f = (2n + 1) * (v / 4L)
Where:
f = frequency of the harmonic
n = harmonic number (n = 2 for the third harmonic)
v = speed of sound in air (340 m/s)
L = length of the closed pipe (0.3 m)
Using the given values, we can calculate the frequency:
f = (2 * 2 + 1) * (340 / 4 * 0.3)
f = (5) * (340 / 1.2)
f = 5 * 283.3333
f ≈ 1416.7 Hz
So, the frequency of the third harmonic is approximately 1416.7 Hz (option a).
To learn more about frequency, refer below:
https://brainly.com/question/5102661
#SPJ11
A particle is confined to move on the surface of a circular cone with its axis on the vertical z axis, vertex at the origin (pointing down), and half-angle a. (a) Write down the Lagrangian L in terms of the spherical polar coordinates r and 0. (b) Find the two equations of motion. Interpret the 0 equation in terms of the angular momentum tz, and use it to eliminate 4 from the r equation in favor of the constant fz. Does your r equation make sense in the case that = 0? Find the value ro of r at which the particle can remain in a horizontal circular path. (c) Suppose that the particle is given a small radial kick, so that r(t) = ro E(t), where E(t) is small. Use the r equation to decide whether the circular path is stable. If so, with what frequency does r oscillate about r0?
The Lagrangian is then given by L = T - V.
(a) Writing down the Lagrangian (L): The Lagrangian is the difference between the kinetic and potential energies of the system.
In this case, the particle is confined to move on the surface of a circular cone, so we need to express the kinetic and potential energies in terms of the spherical polar coordinates (r, θ).
The kinetic energy can be expressed as T = (1/2) m (dr/dt)^2 + (1/2) m r^2 (dθ/dt)^2, where m is the mass of the particle.
The potential energy can be expressed as V = m g r cosθ, where g is the acceleration due to gravity.
The Lagrangian is then given by L = T - V.
(b) Finding the equations of motion: The equations of motion can be obtained by applying the Euler-Lagrange equations to the Lagrangian L.
This involves taking partial derivatives of L with respect to the generalized coordinates (r, θ) and their derivatives (dr/dt, dθ/dt), and then solving the resulting equations.
One of the resulting equations of motion will be related to the angular momentum tz. It can be interpreted as the conservation of angular momentum around the z-axis.
The r equation of motion can be used to eliminate θ from the r equation, in favor of a constant fz.
The r equation should make physical sense even when θ = 0.
To find the value ro of r at which the particle can remain in a horizontal circular path, you would need to analyze the equilibrium conditions of the system and solve for r.
(c) Analyzing stability and frequency of oscillation: By assuming r(t) = ro + E(t), where E(t) is a small radial perturbation from the equilibrium position ro, you can substitute this expression into the r equation of motion to determine whether the circular path is stable.
Stability can be determined by examining the behavior of the perturbation E(t) over time.
The frequency of oscillation about ro can be obtained by analyzing the form of the solution E(t) and determining the frequency at which it oscillates.
To learn more about frequency, refer below:
https://brainly.com/question/5102661
#SPJ11
a simple pendulum has a period of 3.15 s. the acceleration of gravity is 9.8 m/s 2 . what is its length? answer in units of m.
The length of the pendulum is 0.389 m.
The length of a simple pendulum can be calculated using the equation:
T = 2π√(L/g)
where T is the period of the pendulum, L is the length of the pendulum, and g is the acceleration due to gravity.
Rearranging the equation to solve for L, we get:
L = (gT²)/(4π²)
Substituting the given values, we get:
L = (9.8 m/s²)(3.15 s)²/(4π²) = 0.389 m
As a result, the pendulum's length is 0.389 m.
A longer pendulum will have a longer period and a shorter pendulum will have a shorter period, all other factors remaining constant. Similarly, a higher acceleration due to gravity will result in a shorter period, while a lower acceleration due to gravity will result in a longer period.
To know more about the Pendulum, here
https://brainly.com/question/29511476
#SPJ4
1. A small block, with a mass of 0. 05 kg compresses a spring with spring constant 350 N/m
a distance of 4 cm. It is released from rest, then slides around the loop and up the incline
before momentarily comes to rest at point A. The radius of the loop is 0. 1 m.
a. Find the elastic potential energy of the block at point D.
b. Find the velocity of the block at point C.
Find the velocity of the block at the top of the loop at point B.
d. What is the height of point A?
e. Is any work done by the block? Why or why not?
The elastic potential energy of the block at point D is 0.28J, the velocity of the block at point C is 1.21 m/s, the velocity of the block at the top of the loop at point B is 2.19 m/s, the height of point A is 0.51m and no work is done by the block.
a. The elastic potential energy of the block at point D can be found using the equation:
Elastic potential energy = [tex](1/2) \times k \times x^2[/tex]
where k is the spring constant and x is the distance the spring is compressed. Substituting the given values, we get:
Elastic potential energy [tex]= (1/2) \times 350 N/m \times (0.04 m)^2[/tex] = 0.28 J
b. The velocity of the block at point C can be found using the principle of conservation of mechanical energy, which states that the total mechanical energy (kinetic + potential) of a system is constant if no external forces act on it.
The mechanical energy at point D is equal to the elastic potential energy, and at point C it is equal to the sum of the elastic potential energy and the gravitational potential energy:
[tex](1/2) \times m \times v^2 = (1/2) \times k \times x^2 + m \times g \times h[/tex]
where v is the velocity, h is the height above point D, and g is the acceleration due to gravity. Substituting the given values, we get:
[tex](1/2) \times 0.05 kg \times v^2[/tex]
[tex]= (1/2) \times 350 N/m \times (0.04 m)^2 + 0.05 kg \times 9.8 m/s^2 \times (0.1 m - 0.04 m)[/tex]
Solving for v, we get:
v = 1.21 m/s
c. The velocity of the block at the top of the loop at point B can be found using the principle of conservation of mechanical energy again. The mechanical energy at point C is equal to the mechanical energy at point B:
[tex](1/2) \times m \times v^2 = m \times g \times h[/tex]
where h is the height above point C.
Substituting the given values, we get:
[tex](1/2) \times 0.05 kg \times (1.21 m/s)^2[/tex]
[tex]= 0.05 kg \times 9.8 m/s^2 \times (0.1 m + 0.04 m)[/tex]
Solving for v, we get:
v = 2.19 m/s
d. The height of point A can be found using the conservation of mechanical energy again. The mechanical energy at point B is equal to the mechanical energy at point A:
[tex](1/2) \times m \times v^2 = m \times g \times h[/tex]
where h is the height above point B. Substituting the given values, we get:
[tex](1/2) \times 0.05 kg \times (2.19 m/s)^2 = 0.05 kg \times 9.8 m/s^2 \times h[/tex]
Solving for h, we get:
h = 0.51 m
e. No work is done by the block because the only force acting on it is the gravitational force, which is a conservative force. Conservative forces do not dissipate energy as heat or sound, so the total mechanical energy of the block is conserved.
In summary, the elastic potential energy of the block at point D can be found using the spring constant and distance compressed. The velocity of the block at point C and the top of the loop at point B can be found using the conservation of mechanical energy.
The height of point A can also be found using the conservation of mechanical energy. No work is done by the block because the gravitational force is a conservative force.
To know more about velocity refer here:
https://brainly.com/question/19979064#
#SPJ11
Electromagnetic waves give off energy. The electromagnetic spectrum shows us e______ the wavelength the _____ the frequency and the_____ the energy the wave carries.
Electromagnetic waves give off energy. The electromagnetic spectrum shows us that the shorter the wavelength, the higher the frequency, and the greater the energy the wave carries.
What is electromagnetic waves?Electromagnetic waves are an energized form of oscillating electric on magnetic fields travelling in a cosmic distance. Across the electromagnetic spectrum is an extensive range of frequencies that encompass the entirety of electromagnetic radiation, including lower frequency radios waves to elevated frequency gamma rays.
The wavelength of an electromagnetic wave is the consecution of two successive crests or troughs in the wave's measurement, while its frequency is counted by the total amount of oscillations passing through a mark per second, determined via Hertz (Hz).
Learn more about Electromagnetic waves at
https://brainly.com/question/13874687
#SPJ1
If you double the kinetic energy of a nonrelativistic particle, how does its de Broglie wavelength change? The wavelength Choose your answer here by a factor of Type your answer here [factor answer should be given to one decimal place (ex. 1. 5)]
The de Broglie wavelength of a particle is inversely proportional to its momentum, so if the particle's kinetic energy is doubled. This means that the de Broglie wavelength will be halved, so the factor answer is 0.5.
What is wavelength?Wavelength is the distance between two successive points of a propagating wave which have the same amplitude and phase. Wavelengths are typically measured in meters, centimeters, or nanometers, depending on the type of wave. Wavelengths range from radio waves, which have the longest wavelength, to gamma rays, which have the shortest wavelength. Waves with different wavelengths have different properties like speed, frequency, and energy. Wavelength is an important factor in determining the behavior of a wave, such as its reflection, refraction, interference, and diffraction. Wavelength also determines the type of electromagnetic radiation a wave produces, such as visible light, ultraviolet radiation, or infrared radiation. Wavelength is a fundamental property of waves and is used to describe the properties of light, sound, and other forms of energy.
To learn more about wavelength
https://brainly.com/question/10728818
#SPJ4
7. the diagram below represents a circuit consisting of two resistors connected to a source of potential difference. what is the current through the 20.-ohm resistor?
The formula to calculate the current through the 20-ohm resistor in a circuit consisting of two resistors connected to a source of potential difference is given by Ohm's law.
The total resistance in circuit is sum of the two resistors. The current through the 20-ohm resistor can be calculated by dividing voltage of the source by the total resistance of the circuit, then multiplying that value by the inverse of the resistance of the 20-ohm resistor. In mathematical terms, the formula is I = V/(R1 + R2) x (1/R2), where I is the current, V is voltage, R1 and R2 are the resistances of the two resistors, and 1/R2 is the inverse of the resistance of the 20-ohm resistor.
To know more about Ohm's law, here
brainly.com/question/1247379
#SPJ4
--The complete Question is, Assuming the source of potential difference and the values of the resistors are known, what is the formula to calculate the current through the 20-ohm resistor in a circuit consisting of two resistors connected to a source of potential difference? --
Suppose that a 15.0 cm x 5.00 cm plane rectangular loop of wire has 12 turns. A magnetic field of 2.50 T is normal to the plane of the loop. This field is reduced to 1.00 T at a uniform rate in 3.00 ms. What is the current induced in the loop if its total resistance is 2.00 Ω?
The current induced in the loop if its total resistance is 2.00 Ω is 0.0188 A
How to solve for the current[tex]BAcos(theta) = (2.50 T)(0.15 m)(0.05 m)*cos(0)[/tex]
= 0.01875 Wb
When the magnetic field is reduced to 1.00 T, the magnetic flux through the loop changes to:
[tex]phi_2 = BAcos(theta) = (1.00 T)(0.15 m)(0.05 m)*cos(0)[/tex]
= 0.0075 Wb
The rate of change
[tex]= (0.0075 Wb - 0.01875 Wb) / (3.00 ms)[/tex]
[tex]= -3.125*10^{-3} Wb/s[/tex]
[tex]= -(12)(3.125*10^{-3} Wb/s)[/tex]
= -0.0375 V
The current induced in the loop is given by Ohm's law:
I = EMF / R
where R is the total resistance of the loop. Plugging in the values, we get:
I = (-0.0375 V) / (2.00 Ω) = -0.0188 A
The current induced in the loop if its total resistance is 2.00 Ω is 0.0188 A
Read more on current here:https://brainly.com/question/24858512
#SPJ1
your group has invented a solar cell that works by applying photosynthesis chemistry to generating hydrogen which is stored for use in a fuel cell. in 10 different regions differing by weather. you set up solar-city installations (using solar cells and lead acid batteries for storage) and your technology comparing the kilowatt hours generated in a month the results are:
The solar cell that applies photosynthesis chemistry to generate hydrogen is different from traditional solar cells that directly convert sunlight into electricity because it uses a chemical process to store the energy generated by sunlight, whereas traditional solar cells directly produce electricity.
In the photosynthesis-based solar cell, the energy from sunlight is used to split water into hydrogen and oxygen through a chemical reaction, and the hydrogen is stored for later use in a fuel cell to generate the electricity. Traditional solar cells, on the other hand, generate electricity by converting sunlight directly into electrical energy through the photovoltaic effect.
To know more about photosynthesis, here
brainly.com/question/29764662
#SPJ4
--The complete Question is, How does the solar cell that applies photosynthesis chemistry to generate hydrogen differ from traditional solar cells that directly convert sunlight into electricity? --
Compare and contrast compounds and mixtures (select all that are true):
Compounds are pure substances, but mixtures are not.
When two elements bond together into a compound they have new properties.
o When two substances are mixed together in a mixture, they keep their individual properties.
Compounds are physically combined.
O Mixtures are chemically combinded.
Compounds are chemically combined pure substances with new properties, while mixtures are physically combined substances that retain their individual properties.
Compare and contrast compounds and mixtures (select all that are true):
1. Compounds are pure substances, but mixtures are not.
This statement is true. Compounds are pure substances formed by the chemical combination of two or more elements in a fixed ratio, while mixtures are combinations of two or more substances that are not chemically combined and can be physically separated.
2. When two elements bond together into a compound they have new properties.
This statement is true.
When elements chemically bond to form a compound, they create a substance with unique properties different from the individual elements.
3. When two substances are mixed together in a mixture, they keep their individual properties.
This statement is true.
In a mixture, the substances retain their individual properties because they are not chemically combined.
4. Compounds are physically combined.
This statement is false.
Compounds are chemically combined, as elements form chemical bonds to create a compound with new properties.
5. Mixtures are chemically combined.
This statement is false.
Mixtures are physically combined, as the substances in a mixture are not chemically bonded and retain their individual properties.
In summary, compounds are chemically combined pure substances with new properties, while mixtures are physically combined substances that retain their individual properties.
To know more about compounds refer here
brainly.com/question/13516179#
#SPJ11
A football game begins with a kickoff in which the ball travels a horizontal distance of 45 yd and lands on the ground. Suppose the ball is punted from an initial height of 0.740 m.
A) If the ball was kicked at an angle of 42.0° above the horizontal, what is the initial speed of the ball in this case? Express your answer using two significant figures.
The initial speed of the ball is approximately 22.0 m/s.
What is the initial speed of the ball?We can solve this problem using the kinematic equations of motion.
The initial velocity of the ball can be broken down into horizontal and vertical components. The horizontal component will remain constant throughout the flight, while the vertical component will be affected by gravity. We can use the following equations:
Horizontal motion:
x = v_x*t
Vertical motion:
y = v_y*t - (1/2)gt²
where:
x = horizontal distance traveled by the ball (45 yd = 40.8 m)y = initial height of the ball (0.740 m)v_x = initial horizontal velocity of the ball (unknown)v_y = initial vertical velocity of the ball (unknown)g = acceleration due to gravity (9.81 m/s^2)t = time of flight (unknown)We can solve for t by setting y = 0 (since the ball lands on the ground):
0 = v_y*t - (1/2)gt²
Solving for t, we get:
t = (2*v_y)/g
Now we can use the horizontal motion equation to solve for v_x:
x = v_xt
v_x = x/t
v_x = xg/(2*v_y)
Substituting the given values, we get:
v_x = (40.8 m)(9.81 m/s^2)/(2sin(42.0°)*cos(42.0°))
v_x ≈ 22.0 m/s
Learn more about initial speed here: https://brainly.com/question/24493758
#SPJ1