A uniform metre rod of 5 metre length is suspended horizontally by two strings P and Q.Pis attached 0.8 metre from one end and Q is attached 2 metre from the other end.Given that the weight of the rod is 110N. Calculate the tension in each string

Answer:

A.The rabbits in the new habitat will have lower genetic variation than the rabbits in the original habitat.

Explanation:

If two animals of opposite sex are isolated from a larger group of animal, and made to reproduce. They will produce offspring with similar genetic makeup. If this offspring still remain isolated, and continue to interbreed within themselves for a number of consecutive generations, their offspring will all be very closely related genetically. Situations like this just as with the two rabbits in the question leads to a lower genetic variation within the offspring of the two animals.

Animals need to reproduce within a larger group in order to increase genetic variation. Increasing genetic variation reduces the risk of been sucked into a gene pool. A lower genetic variation reduces the fitness of the animals involved. It is only an advantage in cases in which the the original pair are resistant to a deadly disease. In this case all the offspring also develop this immunity. Mostly the effects of a lower genetic variation leaves negative impacts, and animals try to avoid this by preferring to interbreed with unrelated partner

Answer:

I got this and got the answer correct.

Explanation:

Hope it helps :)

Answer: 2 seconds

Explanation:

Since I've only memorized a couple of formulas for these things, I need to do the time first:

I'll use the formula  Distance = (1/2) (acceleration) (time)²

20 m = (1/2) (10 m/s²) (time)²

Time² = (20 m) / (5 m/s²)

Time² = 4 sec²

Time = 2 seconds

Now ...

-- When the ball hits the ground, it has been falling for 2 seconds.

-- Its acceleration has caused its speed to increase by 10 m/s every second.

-- So after 2 seconds, its speed has grown to (2 s) (10 m/s²) = 20 m/s .

Answer:

The unit of current is defined as the flow of 1 coulomb of charge in one second

Answer:

F= GMm/r^2

Explanation:

According to newtons formula for gravitation,

F= GMm/r^2

Answer:

The magnitude and direction of the force per unit length of one wire on the other is 2 x 10⁻⁵ N/m, attractive force.

Explanation:

Given;

distance between the two parallel wires, r = 10 cm = 0.1 m

current in the first wire, I₁ = 2A

current in the second wire, I₂ = 5 A

The force per unit length on each wire can be calculated as;

[tex]\frac{F}{L} = \frac{\mu_oI_1I_2}{2\pi r}[/tex]

where;

μ₀ is permeability of free space = 4π x 10⁻⁷ m/A

[tex]\frac{F}{L} = \frac{\mu_oI_1I_2}{2\pi r} \\\\\frac{F}{L} = \frac{4\pi*10^{-7}*2*5}{2\pi *0.1} \\\\\frac{F}{L} = 2 *10^{-5} \ N[/tex]/ m

The direction of the force between the two wires is attractive since the current in the two wires are in opposite direction.

Therefore, the magnitude and direction of the force per unit length of one wire on the other is 2 x 10⁻⁵ N/m, attractive force.

I would suggest an easier route. So for example, I would research light energy, where it comes from, and what causes it. I won't be able to do the work for you though.

Answer:

According to super hero logic , nothing will happen to him.

But according to science , yes he will get current shock but good news is that he wouldn't get elected until he is in contact with the wires.

He may / may not be affected but his suit will be damaged for sure as it is made of metal.

HOPE THIS HLEP AND PLSSSSS MARK AS BRAINLIEST AND THNXX :)

Answer:

3.33×10⁸ Pa

Explanation:

Pressure: This can be defined as the force acting normally (perpendicular) per unit area. The S.I unit of force is N/m² or Pa.

P = F/A.................. Equation 1

Where F = force created with the tooth, A = Area.

Given: F = 360 N, A = 1.08 mm² = 1.08/1000000 = 1.08×10⁻⁶m.

Substitute this values into equation 1

P = 360/1.08×10⁻⁶

P = 3.33×10⁸ Pa.

Hence the pressure created = 3.33×10⁸ Pa

Answer:

0.08

Explanation:

this problem assume that both of whale and submarine are in rest position or in constant linier motion in same direction and same speed.

The sound will travel from Submarine to the whale and back again to submarine. so the time will be like this

t = 2d/v

t = 2*58.8/1520

t = 117.6/1520

t = 0.077368 s

t ≈ 0.08 s (less then 1 s)

Answer:

0.0774s

Explanation:

The formula to find the time of an echo is time = (2)(distance) / (velocity)

So plug in the numbers to the formula

(2)(58.8) / (1520)

= 0.0774s

Answer:

It slows down as the cross-section becomes smaller is the correct answer to this question.

Explanation:

Answer:

V=-8.35v

Explanation:

Pls see attached file

Answer:

2980 N

Explanation:

The fundamental frequency of a string is:

f₁ = √(T/µ) / (2L)

78 Hz = √(T / (0.03 kg/m)) / (2 (2.02 m))

315.12 m/s = √(T / (0.03 kg/m))

99,300 m²/s² = T / (0.03 kg/m)

T = 2980 N

[tex]\mathfrak{\huge{\pink{\underline{\underline{AnSwEr:-}}}}}[/tex]

Actually Welcome to the Concept of the Mechanics.

So basically here, we know the fact that,

A Generator is opposite of the motor that Converts the Mechanical Energy to Electrical Energy.

C. Concerts Mechanical Energy to Electrical Energy.

Answer:

Q = 1.404 × 10^(5) KJ

Explanation:

We are given:

Mass;m = 500 g = 0.5kg

Temperature 1;T1 = 28 °C

Temperature:T2 = 150 °C

Specific heat capacity;c_p = 4183 J/Kg °C

Latent heat of vaporization;L = 2.26 × 10^(6) J/Kg.

The heat energy needed is given by;

Q = sensible heat energy + Latent heat

Formula for sensible heat is;

Sensible heat energy = mc(t2 - t1)

Formula for Latent heat is ;

Latent heat = mL

Thus:

Q = mc(t2 - t1) + mL

Q = m[c(t2 - t1) + L]

Q = 0.5((4183(159 - 28) + (2.26 × 10^(6)))

Q = 1.404 × 10^(8) J = 1.404 × 10^(5) KJ

Answer:

Nanotechnology means working with materials at the scale of one billionth of a metre.

Explanation:

The prefix “nano” refers to one billionth: it’s part of the scientific scale of measurement. Its science, engineering, and technology are conducted at the nanoscale, which is about 1 to 100 nanometers. Nanoscience and nanotechnology are the study and application of extremely small things. Thus, this describes why the term nano is used to describe nanotechnology.

I hope this helps :)

Answer:

Nanotechnology is technology that is about a nanometer in size, or between 1 nm and 100 nm.

Explanation:

its the sample response on edge 2021

Answer:

A. 5.08 secs.

B. 10.16 secs.

C. 126.50 m.

D. 373.36 m

Explanation:

Data obtained from the question include the following:

Initial velocity (u) = 65 m/s

Angle of projection θ = 50°

A. Determination of the time taken to reach the peak.

Initial velocity (u) = 65 m/s

Angle of projection θ = 50°

Acceleration due to gravity (g) = 9.8 m/s²

Time (t) =.?

t = u•Sine θ/g

t = (65 × Sine 50) /9.8

t = 5.08 secs.

B. Determination of the total time spent by the ball in air.

Time (t) taken to reach the peak = 5.08 secs.

Total time (T) spent by the ball in air =?

T = 2t

T = 2 × 5.08

T = 10.16 secs

Therefore, the total time spent by the ball in air is 10.16 secs.

C. Determination of the maximum height.

Initial velocity (u) = 65 m/s

Angle of projection θ = 50°

Acceleration due to gravity (g) = 9.8 m/s²

Maximum height (H) =..?

H = u²•Sine² θ / 2g

H = 65² × (Sine 50)² / 2 × 9.8

H = 4225 × (Sine 50)² /19.6

H = 126.50 m

Therefore, the maximum height reached by the ball is 126.50 m.

D. Determination of the horizontal distance travelled by the ball.

Initial velocity (u) = 65 m/s

Angle of projection θ = 50°

Acceleration due to gravity (g) = 9.8 m/s²

Horizontal distance (R) =..?

R = u²•Sine 2θ / g

R = 65² × Sine (2×30) / 9.8

R = (4225 × Sine 60) / 9.8

R = 373.36 m

Therefore, the horizontal distance travelled by the ball is 373.36 m

Answer: 5.075Ns

Explanation:

Given the following :

Mass of ball = 145g

Initial Speed of ball = 15m/s

Final speed of ball when hit by the batter = - 20m/s ( Opposite direction)

The impulse of a body is represented using the relation:

Force(f) * time(t) = mass (m) * (final Velocity(V) - initial velocity(u))

Therefore, using:

m(v - u) = impulse

Mass of ball = 145 / 1000 = 0.145kg

Impulse = 0.145(- 20 - 15)

Impulse = 0.145(-35)

Impulse = 5.075Ns

Answer:

d = 421.83 m

Explanation:

It is given that,

Height, h = 396.9 m

Horizontal speed, v = 46.87 m/s

We need to find the distance traveled by the ball horizontally. Let t is the time taken by the ball. Using second equation of motion for vertical direction. So,

[tex]396.9=0\times t+\dfrac{1}{2}\times 9.8 t^2\\\\t=9\ s[/tex]

Now d is the distance covered by the cannonball. So,

[tex]d=vt\\\\d=46.87\times 9\\\\d=421.83\ m[/tex]

Hence, this is the required solution.

Answer:

The answer to your question is given below.

Explanation:

Mechanical advantage (MA) = Load (L)/Effort (E)

MA = L/E

Velocity ratio (VR) = Distance moved by load (l) / Distance moved by effort (e)

VR = l/e

Efficiency = work done by machine (Wd) /work put into the machine (Wp) x 100

Efficiency = Wd/Wp x100

Recall:

Work = Force x distance

Therefore,

Work done by machine (wd) = load (L) x distance (l)

Wd = L x l

Work put into the machine (Wp) = effort (E) x distance (e)

Wp = E x e

Note: the load and effort are measured in Newton (N), while the distance is measured in metre (m)

Efficiency = Wd/Wp x100

Efficiency = (L x l) / (E x e) x 100

Rearrange

Efficiency = L/E ÷ l/e x 100

But:

MA = L/E

VR = l/e

Therefore,

Efficiency = L/E ÷ l/e x 100

Efficiency = MA ÷ VR x 100

Efficiency = MA / VR x 100

Answer:

52 g was lost as carbon dioxide to the atmosphere

Explanation:

When lead carbonate is heated, it decomposes into two components:

1. Lead oxide

2. carbon dioxide

While the lead oxide remains a yellow solid in the heating container, the carbon dioxide escapes into the atmosphere as a gas. The equation of the reaction is as below:

[tex]PbCO_3_{(s)} --> PbO_{(s)} + CO_2_{(g)}[/tex]

Hence, if a 150 g lead oxide is heated in a container and the final mass is 98 g, it means 52 g (150 - 98) of the total mass has been lost as carbon dioxide to the atmosphere.

Answer:

6m^3

Explanation:

volume of box= length×breadth×height

= 2×3×1

=6m^3

Answer:

i n k ok

Explanation:

Answer:

24.1 m/s

Explanation:

Work = change in KE = [tex]KE_{f} - KE_{i}[/tex]

KE initial is 0 because the initial velocity is 0. Therefore, work is equal to final kinetic energy. With that:

[tex]W = KE_{f} = \frac{1}{2}mv_{f}^{2}[/tex]

With some algebraic manipulations,

[tex]v_{f} = \sqrt{\frac{2W}{m} } = \sqrt{\frac{2*450000 J}{1550 kg} } = 24.1 m/s[/tex]

Answer:

The neutron is a subatomic particle, symbol 

n

 or 

n0

, with no electric charge and a mass slightly greater than that of a proton. Protons and neutrons constitute the nuclei of atoms. Since protons and neutrons behave similarly within the nucleus, and each has a mass of approximately one atomic mass unit, they are both referred to as nucleons.[6] Their properties and interactions are described by nuclear physics.

Explanation:

pls mark me as BRAINLIEST

Answer:

Explanation:

This problem bothers on the simple harmonic motion of a loaded spring

Given data

mass attached, m= 0-.675 kg

spring constant, k= 72.4 N/m

the period of oscillation can be solved for using the formula bellow

[tex]T= 2\pi \sqrt{\frac{m}{k} }[/tex]

Substituting the given data into the expression above we have

[tex]T= 2*3.142\sqrt{\frac{0.675}{72.4} }\\T= 6.284*\sqrt{0.0093 }\\T= 0.6[/tex]

T= 0.6 sec

Answer:

0.607

Explanation:

Trust me

Answer:

B

Explanation:

If the light is pointing down ,and then hits a surface of a 60 degree angle, then the direction will be away from the light since the light is touching a surface that is flat of a 60 degree angle then it will reflect off of it Perpendicular.

The electric potential at the geometric center of this rectangle is determined as 43.2 V.

Potential at the center of the rectangle is calculated as follows;

Distance from each corner to the center is calculated as follows;

[tex]x = \sqrt{(a/2)^2 + (b/2)^2}[/tex]

Potential due to four point charges is calculated

[tex]V = \frac{kq}{x} \\\\V =4 (\frac{kq}{x} )\\\\V = 4(\frac{kq}{\sqrt{(a/2)^2 + (b/2)^2} } )\\\\V = \frac{4 \times 9\times 10^{9}\times 6\times 10^{-9}}{\sqrt{(6/2)^2 + (8/2)^2} } \\\\V = \frac{4 \times 9\times 10^{9}\times 6\times 10^{-9}}{5} \\\\V = 43.2 \ Volts[/tex]

Learn more about electric potential here: https://brainly.com/question/14306881

#SPJ2

Answer:

Ammonia, [tex](NH_{3})[/tex]

Explanation:

If a Rac variant, in which the residue at position 61 was replaced with an alanine (Rac-61A), was synthesized. Also, Wild-type Rac and Rac-61A were incubated separately with VopC.

In order to obtain data to support that VopC modifies Rac at residue 61, the samples should be analyzed for the presence of Ammonia ([tex]NH_{3}[\tex]) compound.

In chemistry, the Vanadyl Phthalocyanine (VopC) comprises of a catalytic domain that activates host cells GTPase Rac irreversibly, through the deamide side chain of the residue existing at position 61.

Also, we know that a deamidation reaction gives off Ammonia, [tex](NH_{3})[/tex] and as such when ammonia is present in the sample containing Wild-type Rac but not in Rac-61A, this simply proves or provide the data to support that VopC modifies Rac at residue 61.

Additionally, deamidation can be defined as the chemical conversion (hydrolysis) of an amide functional group such as glutamine, asparagine, in a polypeptide to another functional group such as glutamic acid or isoaspartic acid respectively by treating it with a strong acid (deamidate, transamidase).

Answer:

6 m/s

Explanation:

s=2*3

=6

So, the speed of trqnsverse wave is 6 m/s.

Answer:

6 m/s

Explanation:

2 x 3=6

Answer:

Electric flux;

Φ = 30.095 × 10⁴ N.m²/C

Explanation:

We are given;

Charge on plate; q = 17 µC = 17 × 10^(-6) C

Area of the plates; A_p = 180 cm² = 180 × 10^(-4) m²

Angle between the normal of the area and electric field; θ = 4°

Radius;r = 3 cm = 3 × 10^(-2) m = 0.03 m

Permittivity of free space;ε_o = 8.85 × 10^(-12) C²/N.m²

The charge density on the plate is given by the formula;

σ = q/A_p

Thus;

σ = (17 × 10^(-6))/(180 × 10^(-4))

σ = 0.944 × 10^(-3) C/m²

Also, the electric field is given by the formula;

E = σ/ε_o

E = (0.944 × 10^(-3))/(8.85 × 10^(-12))

E = 1.067 × 10^(8) N/C

Now, the formula for electric flux for uniform electric field is given as;

Φ = EAcos θ

Where A = πr² = π × 0.03² = 9π × 10^(-4) m²

Thus;

Φ = 1.067 × 10^(8) × 9π × 10^(-4) × cos 4

Φ = 30.095 × 10⁴ N.m²/C

Answer:

Explanation:

Given,

Force ( f ) = 30 N

Acceleration(a) = 7.6 m/s

Now, Let's find the mass of the ball

Using the Newton's second law of motion:

We get:

[tex]force \: = mass \: \times acceleration[/tex]

plug the value

[tex]30 \: = m \: \times 7.6[/tex]

Use the commutative property to reorder the terms

[tex] 30 = 7.6 \: m[/tex]

Swap the sides of the equation

[tex]7.6m = 30[/tex]

Divide both sides of the equation by 7.6

[tex] \frac{7.6 \: m}{7.6} = \frac{30}{7.6} [/tex]

Calculate

[tex]m = 3.94 \: kg[/tex]

Hope this helps..

Best regards!!

Answer:

[tex]\displaystyle \boxed{\mathrm{3.95 \: kg }}[/tex]

Explanation:

[tex]\mathrm{force \: (N) = mass \: (kg) \times acceleration \: (m/s^2)}[/tex]

[tex]\mathrm{force = 30N}[/tex]

[tex]\mathrm{acceleration = 7.6 \: m/s^2 }[/tex]

[tex]\mathrm{Find \: the \: mass.}[/tex]

[tex]\mathrm{30 = m \times 7.6}[/tex]

[tex]\displaystyle \mathrm{m =\frac{30}{7.6} }[/tex]

[tex]\displaystyle \mathrm{m = 3.947... }[/tex]