a uniform electric field points along the x axis. if a stationary electron is placed in this field, in what direction will it be forced to sstart to move?

A: The extraction and consumption of fossil fuels by humans have had significant environmental, social, and economic impacts. The burning of fossil fuels has resulted in increased greenhouse gas emissions, contributing to global climate change and its associated impacts such as rising sea levels, extreme weather events, and biodiversity loss. Fossil fuel extraction has also led to habitat destruction, air and water pollution, and negative health impacts on nearby communities. In addition, the use of fossil fuels has had significant economic and political implications, as countries rely on these finite resources for their energy needs.

B: Understanding the cause and effect relationships between humans and the removal of fossil fuels can help us make predictions about the future of these resources. By analyzing historical patterns of fossil fuel extraction and consumption, we can make projections about future availability and production. Additionally, by considering the environmental and social impacts of fossil fuels, we can anticipate the potential consequences of continued reliance on these resources, and the need for alternative energy sources. Such understanding can inform policy decisions, technological advancements, and societal behaviors that can mitigate negative impacts and ensure a sustainable energy future.

To determine the time for the log to reach a speed of 0.5m/s with a constant force of 2500 n and a coefficient of kinetic friction between the ground and the log of 0.45, we can use the equation F = m * a, where F is force, m is mass, and a is acceleration.

Rearranging the equation to solve for a, we get a = F/m.

Since we know the force (2500 n) and the mass (300 kg), we can calculate the acceleration, a = 2500 n/300 kg = 8.33 m/s2.

Using the equation v2 = u2 + 2 * a * s, where v is the final velocity, u is the initial velocity, and s is the displacement, we can solve for the time it takes the log to reach a speed of 0.5m/s.

Since the initial velocity is zero, v2 = 0 + 2 * 8.33 m/s2 * s, where s is the displacement.

We know the final velocity is 0.5 m/s, so v2 = 0.52, or 0.25 m/s2.

Substituting this value into the equation, we get 0.25 m/s2 = 2 * 8.33 m/s2 * s, or s = 0.25/2*8.33 = 0.03 m.

Finally, we can use the equation t = v - u/a, where t is the time, to calculate the time it takes the log to reach a speed of 0.5m/s.

Since we know the initial velocity is zero, t = 0.5/8.33 = 0.06 s.

Therefore, it takes the log 0.06 seconds to reach a speed of 0.5m/s with a constant force of 2500 n and a coefficient of kinetic friction between the ground and the log of 0.45.

Learn more about determining the time for the log to reach a speed at: brainly.com/question/24177526

SPJ11

The smallest radius of the sphere before it is sent beyond our solar system is: 0.023 AU.

The smallest radius of a perfectly absorbing sphere with a density of 1000 kg/m³, which is gravitationally attracted to the Sun and is feeling a repulsive force due to radiation can be determined by following the given steps:

The gravitational force on the sphere at a distance of 1 AU from the sun is given by
F = GmM/r²F = 6.67 × 10⁻¹¹ × mM / (1.5 × 10¹¹)²F = 3.52 × 10⁻⁷mM

The repulsive force and the gravitational force on the sphere are equal when:r³ = L / 4πGcMm

Using the given values:r³ = (3.9 × 10²⁶) / (4π × 6.67 × 10⁻¹¹ × 2.998 × 10⁸ × (2 × 10³) × m sun × m)r³ = (1.46 × 10¹⁹) / m

The smallest radius of the sphere, beyond which it will be sent beyond the solar system is: r = (1.46 × 10¹⁹m³ / 1000kgm⁻³)¹∕³r = 3.44 × 10⁶ m, which is equivalent to 0.023 AU.

To know more about "Repulsive force" refer here:

https://brainly.com/question/30656894#

#SPJ11

Answer:

The speed of light is approximately 299,792 kilometers per second. If the distance from Earth to the Moon is 386,400 kilometers, then it would take light about 1.28 seconds to travel from Earth to the Moon.

As a result, light would need to travel from Earth to the moon for around 1.29 seconds.

On average, our planet and its sizable natural satellite are separated by roughly 238,855 miles (384,400 kilometres). As a result, the total amount of moonlight we observe is 1.255 seconds old, and it takes around 2.51 seconds for light to travel from the Earth to the moon.

we can use the following formula:

time = distance / speed

First, we need to convert the distance from kilometers to meters:

386,400 km = 386,400,000 meters

Now, we can calculate the time it will take light to travel from Earth to the Moon:

time = 386,400,000 meters / 299,792,458 meters per second

time

≈ 1.29 seconds

To know more about satellite visit:-

https://brainly.com/question/9266911

#SPJ1

1. The statement is true.

2. The statement is partially true.

3. The average speed of the particle is 0.566 m/s.

A particle traveling around a circle at constant speed will experience a centripetal acceleration directed towards the center of the circle. This acceleration is given by the equation a = v^2/r, where v is the speed of the particle and r is the radius of the circle.

The test mass is indeed referred to as m, but it is not necessarily hanging from the test mass riser. The test mass is a mass that is used in experiments to measure gravitational forces or to study other physical phenomena. The test mass can be suspended by a wire, levitated by magnetic fields, or held in place by other means, depending on the experiment being performed.

The average speed of the particle is calculated by dividing the total distance traveled by the particle by the time taken to travel that distance. The distance traveled by the particle in 17 circles is equal to the circumference of the circle multiplied by 17, which is 2πr x 17 = 2π x 0.15 m x 17 = 16.98 m. The time taken to travel this distance is given as 30 seconds. Therefore, the average speed of the particle is,

Average speed = Total distance traveled / Time taken

= 16.98 m / 30 s

= 0.566 m/s

To know more about average speed, here

brainly.com/question/14281011

#SPJ4

The correct option is A, The flow of charges can be used to power the load Pole piece is a generator this description and model explain.

A generator is a machine or device that converts one form of energy into another, typically mechanical energy into electrical energy. It works on the principle of electromagnetic induction, in which a conductor is moved through a magnetic field, creating an electric current in the conductor. Generators are commonly used in power plants to produce electricity on a large scale, as well as in portable devices such as generators for camping and construction sites.

There are several types of generators, including AC generators, which produce alternating current, and DC generators, which produce direct current. They can also be powered by different types of fuel, including diesel, gasoline, and natural gas. Generators play an important role in providing backup power during power outages, and are used in remote areas where access to electricity is limited.

To learn more about Generator visit here:

brainly.com/question/1267492

#SPJ4

Complete Question:-

A student was asked to draw and describe a model for either an electric motor or a generator. Her description and model are shown below: The model below shows a loop of wire which is being rotated by some external force between two strong permanent magnets. This causes the charges in the loop to want to flow through it. The flow of charges can be used to power the load Pole piece. What does this description and model explain? A. A generator

B. A motor

C. Neither a motor nor a generator.

D. Both a motor and a generator.

If the frequency of the block is 0.44 hz , the earliest time after the block is released that its kinetic energy is exactly one-half of its potential energy is: (1/0.44)√2P/m

At the time the block is released, its potential energy is at a maximum and its kinetic energy is zero. The block then moves down, and its potential energy decreases while its kinetic energy increases.

At any given time, the total energy of the block is equal to the sum of its potential energy and its kinetic energy. So, when the kinetic energy is exactly one-half of the potential energy, the total energy of the block is equal to three halves of the initial potential energy.

To calculate the earliest time at which the kinetic energy is one-half of the potential energy, we must use the equation P = ½mv^2. Rearranging, we get: v = √2P/m. We also know that the frequency of the block is 0.44 Hz, which is equal to one divided by the period, T. Thus, the velocity of the block can be calculated by multiplying both sides of the equation with T: v = √2P/(mT).

Therefore, the earliest time after the block is released that its kinetic energy is exactly one-half of its potential energy is equal to:  [tex]T = \sqrt{2}P/(mv) = \sqrt{2} P/(m*(1/f)) = (1/f)\sqrt{2} P/m[/tex]

Plugging in the values given in the question, the earliest time after the block is released that its kinetic energy is one-half of its potential energy is equal to: T = (1/0.44)√2P/m.

To sum up, the earliest time after the block is released that its kinetic energy is one-half of its potential energy is equal to (1/f)√2P/m, where f is the frequency of the block, P is its potential energy, and m is its mass. In this case, the earliest time is equal to (1/0.44)√2P/m.

To know more about kinetic energy refer here:

https://brainly.com/question/26472013#

#SPJ11

A gamma ray photon has a higher frequency than a radio photon, which means it has a shorter wavelength and higher energy. Option c is the correct choice.

Electromagnetic radiation, such as gamma rays and radio waves, can be described in terms of both wavelength and frequency. Wavelength is the distance between successive peaks or troughs of a wave, while frequency is the number of wave cycles that pass a given point in a unit of time. The two are related by the equation λν=c, where λ is the wavelength, ν is the frequency, and c is the speed of light.

Gamma rays have a much higher frequency than radio waves, which means they have a much shorter wavelength. Since energy is directly proportional to frequency, gamma rays also have much higher energy than radio waves. Both gamma rays and radio waves travel at the speed of light, so they have the same speed. Therefore, the correct answer is option c - a shorter wavelength, higher energy, and higher speed.

To know more about gamma ray, here

brainly.com/question/23281551

#SPJ4

In order to make an energy analysis as easy as possible, the following objects should be included within the system: Data logging instrumentation, Microprocessor based controllers, and Electronic load controllers.

An Energy Analysis is a method of determining the energy consumption of a system. It is done to help identify and evaluate opportunities to reduce energy usage and cost, improve efficiency and reduce the environmental impact of the energy consumed.
Energy analyses assist in the identification of system inefficiencies and provide a basis for energy management decisions.

The objects included in the system to make energy analysis as easy as possible are as follows:

To know more about "Microprocessor" refer here:

https://brainly.com/question/30558959#

#SPJ11

= 1121.07 kPa ≈ 430 kPa

Therefore, the allowable net pressure that would limit the settlement to 2.5 in is 430 kPa.

Determine the allowable net pressure that would limit the settlement to 2.5 in.

A 10 m × 6 m mat foundation is placed at 6 ft depth in sand where the average value of n60 is 23. The allowable net pressure that would limit the settlement to 2.5 in is 430 kPa. The steps to determine the allowable net pressure are as follows:

Step 1: Convert the dimensions of the foundation to feetThe dimensions of the foundation are 10 m × 6 m. Converting them to feet, we get:

10 m × 3.281 ft/m

= 32.81 ft6 m × 3.281 ft/m =

19.68 ft

So the dimensions of the foundation are 32.81 ft × 19.68 ft.

Step 2: Convert the depth to feetThe depth is given in feet as 6 ft. So we don't need to convert it.

Step 3: Calculate the effective overburden pressureThe effective overburden pressure can be calculated using the formula:σ' = γDN60

where:σ' = effective overburden pressure (kPa)γ

D = effective unit weight of soil (kN/m³)N60

= standard penetration resistance corrected for energy efficiency to a depth of 60 cm

For sand, the effective unit weight can be assumed to be 110 lb/ft³ or 17.6 kN/m³. So,γD = 17.6 kN/m³The value of N60 is given as 23. So,σ' = 17.6 × 23σ' = 404.8 kPaThe effective overburden pressure is 404.8 kPa.

Step 4: Determine the allowable net pressureThe allowable net pressure can be determined using the formula:qa = (qs - σ') / F

where:qa = allowable net pressure (kPa)

qs = safe bearing capacity (kPa)

F = factor of safety

Since the settlement is limited to 2.5 in, the factor of safety can be taken as 3. The safe bearing capacity can be determined using the Terzaghi's bearing capacity equation:qs = cNc + γDNq + 0.5γBNγ

where:c = cohesion of soil (kPa)Nc, Nq, Nγ = bearing capacity factorsγ

B = saturated unit weight of soil below the foundation (kN/m³)

Assuming there is no cohesion in the soil (c = 0) and γB = 20 kN/m³, we get:

qs = 17.6 × 23 × 30 + 0.5 × 17.6 × 20 × 30

qs = 3768 kPa

So,qa = (qs - σ') / Fqa

= (3768 - 404.8) / 3qa

= 1121.07 kPa ≈ 430 kPa

Therefore, the allowable net pressure that would limit the settlement to 2.5 in is 430 kPa.

Learn more about cohesion of soil.

brainly.com/question/30250246

#SPJ11

Answer:

Explanation:

La longitud de onda es la distancia que recorre una perturbación periódica que se propaga por un medio en un ciclo. La frecuencia es la cantidad de ondas que pasan por un punto durante un período de tiempo. El período es el tiempo que tarda una onda en completar un ciclo.

When a switch is closed, the electrons from the battery will reach the bulb at the speed of light or 299,792,458 meters per second. So, it will take approximately 3.34 x [tex]10^{-9}[/tex] seconds for electrons from the battery to reach the bulb.

Electric current is the flow of electric charges. The flow of electric charges through a circuit is known as current. It is defined as the rate of flow of electric charges through a conductor. The SI unit of electric current is Ampere (A). Electric charge is a fundamental property of matter that results from an imbalance in the number of protons and electrons present in an atom or molecule. When the number of electrons is more than the number of protons, an atom or molecule is said to be negatively charged.

On the other hand, when the number of electrons is less than the number of protons, an atom or molecule is said to be positively charged. Electric potential is the work done per unit charge by an external force in moving a positive charge from infinity to a point in the electric field. The electric potential difference between two points in an electric field is the work done per unit charge by an external force in moving a positive charge from one point to another in the electric field.

The SI unit of electric potential difference is also volt (V). Therefore, , it will take approximately 3.34 x [tex]10^{-9}[/tex] seconds for electrons from the battery to reach the bulb.

To know more about Electrons refer here :

https://brainly.com/question/30092944

#SPJ11

The energy flows from the sun to the grass, and then to the rabbit, while the carbon cycles between the atmosphere, the grass, and the rabbit.

What is Food Chain?

A food chain is a linear sequence of organisms, starting from producers and ending with top predators, that shows the transfer of energy and nutrients between different organisms in an ecosystem. The food chain illustrates how energy flows from one organism to another as they consume and are consumed by each other. The producers, such as plants, convert the energy from the sun into chemical energy through photosynthesis.

In this food chain, the sun provides energy to the grass through the process of photosynthesis. The grass then stores this energy in the form of carbohydrates, which the rabbit consumes as food. During cellular respiration in the rabbit's cells, the carbohydrates are broken down into carbon dioxide and water, releasing energy in the form of ATP. The carbon dioxide is then released back into the atmosphere through respiration or excretion, where it can be taken up by plants during photosynthesis, completing the carbon cycle.

Learn more about Food Chain from the given link

https://brainly.com/question/16504883

#SPJ1

The movement of the school bus is an example of kinetic energy. Option 1 is correct choice.

Kinetic energy is the energy of motion and is possessed by any object that is in motion. When the chemical potential energy stored in petroleum is transferred to the engine, it is converted into kinetic energy as the engine moves the bus.

The amount of kinetic energy possessed by an object depends on its mass and velocity. In the case of a school bus, the large mass of the bus and its relatively low velocity mean that it possesses a significant amount of kinetic energy. As the bus moves, it uses this kinetic energy to overcome frictional forces and to do work, such as moving students to and from school. Therefore, the correct answer is option 1 - kinetic.

To know more about energy, here

brainly.com/question/30715073

#SPJ4

The turbine that takes the lesser amount of time to rotate through 1.0 radian of angular displacement is both because They take the same amount of time.

The relationship vt=ωr  which implies that doubling either the tangential velocity or the radius has no effect on the angular velocity. As a result, the 1.0 radian revolution is completed by both turbines in the same length of time and at the same rate of rotation.

A turbine is a device that converts fluid rotational energy captured by a rotor system into useful work or energy. In order to generate power, turbines either use mechanical gearing or electromagnetic induction.

Learn more about turbine at:

https://brainly.com/question/28168446

#SPJ1

Two parallel wires separated by 2.20 cm each carry 43.0 A and experience a force of 0.700 N. If one wire is very long, so the length of the other wire is 2 × 10² m.

Given data:

Separation between two parallel wires, d = 2.20 cm

Current passing through wires, I = 43.0 AForce between two parallel wires, F = 0.700 N

We need to find the length of the wire.

Force between two parallel wires is given by the formula;

F = μ0 x I1 x I2 x L / d

where,

I1 and I2 are the current passing through wires L is the length of wire d is the distance between the two parallel wires

Substituting the values of the given data,

Therefore, the length of the other wire is 2 × 10² m.

Learn more about length: https://brainly.com/question/24487155

#SPJ11

The resistance of a resistor with color bands violet-yellow-brown-gold is 740 Ω +/- 5%, and its tolerance is 5%. The numerical uncertainty of the resistor is 37 Ω.

Resistance: The violet-yellow-brown-gold-colored resistor's resistance value can be determined by reading the colors in the order they are printed. The value is determined as follows:

violet indicates 7, yellow indicates 4, brown indicates 1, and gold indicates a multiplier of 0.1.

Therefore, the resistance of this resistor is calculated as follows:

7 4 × 101 = 740 ohms.

Tolerance: The resistor's tolerance, which indicates the percentage variation in the resistance of the resistor from its nominal or theoretical value, is indicated by a fourth color band. The resistor's nominal resistance is calculated as follows:

740 ohms, with a tolerance of ±5%.

As a result, the tolerance is indicated by a gold-colored band.

Numerical Uncertainty: The numerical uncertainty of a resistor is calculated using the following equation:

Numeric uncertainty = (Tolerance/100) × Resistance

Numeric uncertainty = (5/100) × 740 = 37 ohms

Therefore, the numerical uncertainty of a resistor with color bands violet-yellow-brown-gold is 37 ohms.

In summary,

Resistance =  740 ohms

Tolerance = ±5%

Numerical uncertainty = 37 ohms

Know more about resistor here:

https://brainly.com/question/24858512

#SPJ11

Answer:

you Can Do it.please sub my because i'm stronger and i'm better

The only vehicle that is accelerating is: C: a race car that is rounding a sharp turn at a constant speed.

Acceleration refers to a change in velocity, which can mean a change in speed or direction. In the case of option C, the race car is constantly changing its direction, so it is experiencing acceleration even though its speed remains constant.

Option A is cruising at a steady speed, so it is not accelerating.

Option B is parked and not moving, so it is not accelerating.

What is velocity?

Velocity is a physical quantity that describes the rate and direction of the motion of an object. It is a vector quantity, which means it has both magnitude and direction.

The magnitude of velocity is the speed of an object in a given direction. For example, if a car is traveling at a speed of 50 miles per hour (mph) in the north direction, its velocity is 50 mph north.

The direction of velocity is the direction in which the object is moving. It is usually specified as an angle relative to a reference axis or direction. In the example above, the direction of the car's velocity is north.

To know more about velocity, viist:

https://brainly.com/question/17127206

#SPJ1

Answer:

The equations in which the units on the left side of the equals sign are consistent with the units on the right side are (a), (b), and ©.

In equation (a), x = vt, both sides have units of meters. In equation (b), x = vt + 1/2 * a * t ^ 2, both sides also have units of meters. In equation ©, v = at, both sides have units of meters per second.

Equations (d), (e) and (f) are not dimensionally consistent. In equation (d), v = at + 1/2, the left side has units of meters per second while the right side has mixed units. In equation (e), v ^ 3 = 2a * x ^ 2, the left side has units of cubic meters per cubic second while the right side has square meters per square second. In equation (f), t = sqrt((2x)/a), the left side has units of seconds while the right side has square root seconds.

The units are consistent in equations (a), (b), (c), and (f). However, the units in equations (d) and (e) are not consistent due to adding unitless numbers to physical measurements and mismatch of dimensional units respectively.

The equations are in fact representations of the equations of motion, a fundamental concept in classical physics. Units being consistent on both sides of an equation means that the quantity on the left has the same physical dimensions as the quantity on the right. Using dimensional analysis, we can verify the units on both sides:

https://brainly.com/question/14530781

#SPJ2

An additional charge of 4.0 μC flows to the positive plate of the capacitor.

Initially, when the uncharged capacitor is connected to the 3.0 V battery, 6.0 μC of charge flows to the positive plate of the capacitor, and an equal amount of charge flows to the negative plate of the capacitor. Therefore, the final charge on each plate of the capacitor is 6.0 μC.

Now, when the 3.0 V battery is disconnected and replaced with a 5.0 V battery, the potential difference across the capacitor becomes 5.0 V. Since the capacitance of the capacitor remains constant, the final charge on each plate of the capacitor can be calculated using the formula: Q = CV

Where Q is the charge, C is the capacitance, and V is the potential difference across the capacitor.

Therefore, the final charge on each plate of the capacitor is:

Q = CV = (6.0 × 10⁻⁶ F) × (5.0 V) = 30.0 μC

Since the initial charge on each plate was 6.0 μC, the additional charge that flows to the positive plate when the 5.0 V battery is connected is: 30.0 μC - 6.0 μC = 24.0 μC

Therefore, an additional charge of 24.0 μC flows to the positive plate.

To know more about capacitor, refer here:

https://brainly.com/question/30889004#
#SPJ11

when you run the program, it will allow you to select a two-column spreadsheet file, read its contents, and plot Y vs. X on an XY Graph as well as display the arrays in an indicator cluster labeled "XY Cluster"

Write a VI that reads and displays data from a two-column spreadsheet-formatted computer file?

To create a VI that reads and displays data from a two-column spreadsheet-formatted computer file, follow these steps:

Step 1: Open LabVIEW and create a new VI.

Step 2: Build the front panel by adding the necessary controls and indicators:
- Add a File Path control for the user to select the spreadsheet file.
- Add an XY Graph to display the plotted Y vs. X data.
- Add an indicator cluster labeled "XY Cluster" to display the X and Y arrays.

Step 3: Create the block diagram for your program:
- Add the "Read From Spreadsheet File" block. Connect the File Path control to the "file path" input of this block.
- Set the "delimiter" input of the "Read From Spreadsheet File" block to a comma (or the appropriate delimiter for your file).
- Add an "Index Array" block to separate the two columns of data. Connect the "2D array" output from the "Read From Spreadsheet File" block to the input of the "Index Array" block. Set the "Index" input to 0 to obtain the first column (X) and to 1 to obtain the second column (Y).
- Connect the X and Y outputs of the "Index Array" block to the XY Graph and the XY Cluster indicator on the front panel.

Step 4: Save the VI as "Your Name Chapter 7.vi".

Now, when you run the program, it will allow you to select a two-column spreadsheet file, read its contents, and plot Y vs. X on an XY Graph as well as display the arrays in an indicator cluster labeled "XY Cluster".

Learn more about spreadsheet.

brainly.com/question/8284022

#SPJ11

Answer:

(i) When the microphone is moved, in the direction of the arrow, beyond B, it will detect a series of maxima and minima of sound intensity. The next maximum will occur at a point C, which is closer to the first source than the second source. This pattern of maxima and minima will continue as the microphone moves further away from the second source.

(ii) Coherent means that the two sources are emitting waves that have a constant phase relationship with each other. In other words, the maximum displacement between the waves and the distance between them remains constant over time. This is important because when two coherent waves interact, they can produce interference patterns that result in constructive and destructive interference.

(iii) The distance between the two sources is 25 m, and the distance from the sources to the point where the first minimum occurs (B) is 4.60 m. Using the Young double slit formula, we can calculate the wavelength of the sound from the sources:

wavelength = (distance between sources * distance from sources to first minimum) / (distance from sources to microphone at first minimum)

wavelength = (25 m * 4.60 m) / (4.60 m - 1 m)

wavelength = 8.7 m

Therefore, the wavelength of the sound from the sources is 8.7 meters.

(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)

The pressure of the gas within the container is the same as the pressure inside a 1040 cm long column of water.

The liquid column on each side will be at the same height when the pressures are equal. On a scale, this is typically denoted as zero. The fluid level on one side of the manometer will be equal to the level on the other side when both sides are exposed to the atmosphere because P1 equals P2.

We can utilise the equation P = gh since the pressure of the gas equals the pressure of the water column.

As a result, the gas's pressure is:

P = 75 cm Hg * 1333.22 Pa/cm Hg = 99,991.5 Pa

a) 10 cm: The pressure of the water column is:

P = ρgh = (1000 kg/m³) * (9.81 m/s²) * (0.1 m) = 981 Pa

b) 20 cm: The pressure of the water column is:

P = ρgh = (1000 kg/m³) * (9.81 m/s²) * (0.2 m) = 1962 Pa

c) 1030 cm: The pressure of the water column is:

P = ρgh = (1000 kg/m³ * (9.81 m/s²) * (10.3 m) = 100,205 Pa

d) 1040 cm: The pressure of the water column is:

P = ρgh = (1000 kg/m³) * (9.81 m/s²) * (10.4 m) = 101,971 Pa

To know more about pressure visit:-

https://brainly.com/question/30482677

#SPJ1

The energy wasted per minute in the pump is 16.8 kJ.

What is Power?

Power is the rate at which work is done or energy is transferred. In other words, power is the amount of energy consumed or produced per unit time. Power can be calculated using the following formula:

Power = Work/Time

where Work is the amount of energy consumed or produced, and Time is the duration over which the energy is consumed or produced.

The energy output of the engine is 1.4 kW. This means that the engine is able to produce 1.4 kJ of energy every second.

The pump is raising 120 kg of water through a height of 50 m every minute. The potential energy gained by the water is given by the formula:

potential energy = mgh

where m is the mass of the water, g is the acceleration due to gravity, and h is the height through which the water is raised.

Substituting the given values, we get:

potential energy = (120 kg) x (9.81 m/s^2) x (50 m) = 58860 J

This means that the pump is doing work of 58860 J every minute.

However, not all of the energy produced by the engine is used by the pump. Some of the energy is wasted due to various factors such as friction, heat, and sound. Let's assume that 20% of the energy produced by the engine is wasted. This means that the energy wasted per minute is:

energy wasted = 0.2 x (1.4 kW) x (60 s) = 16.8 kJ

Learn more about Power from given link

https://brainly.com/question/1634438

#SPJ1

Answer:

Neptune or Uranus.

Explanation:

The blue skies and rapid tilt

Answer:

The magnetic field at point P midway between the two wires is zero. This is because the magnetic fields produced by the two wires are equal in magnitude but opposite in direction, so they cancel each other out at point P.

Explanation:

Answer:

closer

Explanation:

the sun is the closest star. it gives us heat to and light, plants energy, we orbit the sun